[Q] stuck on dell xcd35 [zte blade] at dell startup logo - Blade General

plz help...
i just stuck on dell logo... it is not going further from the logo, i have also tried removing battery for a night, full charged and then restared using Power key+home key+volume down but still result is same. actualy i was using cynogenmod 7 for some time and then yesterday i was trying to install a stock rom using rom manager (i dont remember the stock rom name). after downloading i didnt back up my rom then proceeded. it restarted and stuck on the dell logo from then. i really dont know how to reset it... please help me...

NO112 said:
plz help...
i just stuck on dell logo... it is not going further from the logo, i have also tried removing battery for a night, full charged and then restared using Power key+home key+volume down but still result is same. actualy i was using cynogenmod 7 for some time and then yesterday i was trying to install a stock rom using rom manager (i dont remember the stock rom name). after downloading i didnt back up my rom then proceeded. it restarted and stuck on the dell logo from then. i really dont know how to reset it... please help me...
Click to expand...
Click to collapse
Reboot into recovery by pressing vol- and power button together then wipe data.wipe cache. Wipe dalvic cache. Then flash ROM and gapps
Sent from my Blade using xda app-developers app

did you repartition your internal memory for CM?
It may be possible that your /system is not large enough for your stock ROM.
Flash CM again and see if it works,
(if you are not sure about partition size,in terminal emulator type df -h, and report how much you get for system. for stock you need 200+ MB)

keviv77 said:
Reboot into recovery by pressing vol- and power button together then wipe data.wipe cache. Wipe dalvic cache. Then flash ROM and gapps
Sent from my Blade using xda app-developers app
Click to expand...
Click to collapse
thanx friend 4 replying....
but its not working... i tried rebooting by pressing vol- and power button together but i cant reach at any options, it only shows me the dell logo and nothing else is happening even if i leave it for at least for an hour... also it doesn't starts with a vibration like before... please friend if u can help by any more suggestions...

NO112 said:
thanx friend 4 replying....
but its not working... i tried rebooting by pressing vol- and power button together but i cant reach at any options, it only shows me the dell logo and nothing else is happening even if i leave it for at least for an hour... also it doesn't starts with a vibration like before... please friend if u can help by any more suggestions...
Click to expand...
Click to collapse
Have u installed cwm. Its looks partition issue. Download tpt helper from play store. There's a guide in android development section something like "noob proof guide for tpt" read it
NOTE: press thanks if I helped
Sent from my Blade using xda app-developers app

keviv77 said:
Have u installed cwm. Its looks partition issue. Download tpt helper from play store. There's a guide in android development section something like "noob proof guide for tpt" read it
NOTE: press thanks if I helped
Sent from my Blade using xda app-developers app
Click to expand...
Click to collapse
thanx friend...
yes i had installed cwm. i had updated my cell from froyo to cynogenmod 7 about 2 or 3 months ago using rom manager and cwm. and this time i was trying to try something different rom and its very hard to remember what went wrong.
also as u suggested i tried download tpt helper but i couldn't find a way to install tpt helper from play store. my phone is not going further from the dell logo, once i press the power button the dell logo appears on the screen and remains that way no matter how long i leave it to process further. dead end. i think its the situation that should be called "bricked"...:crying:

NO112 said:
thanx friend...
yes i had installed cwm. i had updated my cell from froyo to cynogenmod 7 about 2 or 3 months ago using rom manager and cwm. and this time i was trying to try something different rom and its very hard to remember what went wrong.
also as u suggested i tried download tpt helper but i couldn't find a way to install tpt helper from play store. my phone is not going further from the dell logo, once i press the power button the dell logo appears on the screen and remains that way no matter how long i leave it to process further. dead end. i think its the situation that should be called "bricked"...:crying:
Click to expand...
Click to collapse
There's a thread on modaco on unbricking blade.find that.
Sent from my Blade using xda app-developers app

NO112 said:
thanx friend...
yes i had installed cwm. i had updated my cell from froyo to cynogenmod 7 about 2 or 3 months ago using rom manager and cwm. and this time i was trying to try something different rom and its very hard to remember what went wrong.
also as u suggested i tried download tpt helper but i couldn't find a way to install tpt helper from play store. my phone is not going further from the dell logo, once i press the power button the dell logo appears on the screen and remains that way no matter how long i leave it to process further. dead end. i think its the situation that should be called "bricked"...:crying:
Click to expand...
Click to collapse
Did you try powering on with volume down pressed?
QuantumFoam aka Faiz | Asus TF300T - ZTE Blade | gigatechworld.com

didn't work
yes i tried powering on pressing volume minus key, but it didn't work at all...:crying:

NO112 said:
yes i tried powering on pressing volume minus key, but it didn't work at all...:crying:
Click to expand...
Click to collapse
Take out battery n put it again. Then try by pressing vol- and power button. If nothing happens then u can download tpt from desktop and copy image file to sdcard. Then flash it by pressing vol+ and menu and power button together
Sent from my Blade using xda app-developers app

i tried replacing the battery then powering on pressing vol- and power button but still nothing is happening... please give the link to download tpt...

NO112 said:
i tried replacing the battery then powering on pressing vol- and power button but still nothing is happening... please give the link to download tpt...
Click to expand...
Click to collapse
Google it. U WL find it on modaco
Sent from my Blade using xda app-developers app

Related

[Q] m2 stuck in moto logo

hi,
i was installing a couple of apps via apk file the other day and a couple of them needed a restart. once i've restarted the phone just got stuck on the moto logo with the purplish gas cloud effect in the background. ive tried the factory reset but to no avail. removed sd card, left sim card then booted - no go.
is there anything i can do via sd card or windows to resolve this issue? i am using windows 7 ultimate 64bit.
your suggestions will be very much appreciated.
The only way how to solve this problem by yourself is probably flashing your Milestone 2 with RSD-Lite. It's likely that you find a how-to somewhere here in the MM2-forum.
Sent from my Milestone 2 using Tapatalk
i found this =_)
and i am doing it now hopefully it works
it worked and im back in business was doing it in the wrong screen... worked for me when i pressed <up arrow+power button>
xOnerOs said:
it worked and im back in business was doing it in the wrong screen... worked for me when i pressed <up arrow+power button>
Click to expand...
Click to collapse
Since yesterday my MM2 is briqued on boot animation ....
I have test RSDlite (it's not the first time I use it) but nothing (with 2 SBF different)
RSDLite :
1) Download firmware ==> Ok
2) Installation ==> Ok
3) Reboot ==> block on boot animation .... (look screen say "reboot manually.." but my MM2 is power on )
Please Help me ......
Thanks in advance !
i couldn't post yet at this thread -> [ROM]Argen2Stone v1.8
so i'm posting here for the meantime...
i'm trying to flash to the brazilian sbf
but the start button on RSD is grayed out
i've uninstalled and reinstalled the moto drivers and RSD
restarted the computer a couple of times
but the start button is stilled grayed out >_<
the UK sbf file does not experience the same problem
any suggestions? i would appreciate it!
anyone?
Sent from my MotoA953 using Tapatalk
xOnerOs said:
anyone?
Sent from my MotoA953 using Tapatalk
Click to expand...
Click to collapse
Theres a thread in d general section of d ms2 forum called 'questions & truobleshooting'....post ur query there n somebody would be able to help u
Sent from my MotoA953 using XDA App
With phone power off,hold X button and press power button, wait appear one triangule with exclamation, now press @ button and navigate with vol down to Wipe Data/Factory Reset and press camera button
Look here

[Q] "please manually power up this phone" on RSD lite

hi. i tried to install a custom rom on my bravo..... and i occured an error....so i used rsd-lite with the stock sbf (p4_kobe_umts_kobe_user_3.4.2-125_KOB_FFW-4_product-keys-ATT-US_ATT-signed.sbf). after the "normal" procedure the program show the message "please manually power up this phone". i tried to remove battery, replace it, enter in bootloader mode but nothing.... the bravo loop to infinite with the red M and the white screen.... somebody can help me please?!
thanks e sorry for my english
somebody has another sbf, please? thks
Dont take out battery when its done it will run its course. If it bootloops after flash then hold volume down during boot and when rexovery menu starts then squeeze volume button in anf wipe data
Sent from my MB520 using XDA App
i tried wiht and without the cable and wiht RSD lite running... but nothing... again the bootloop
Wipe data in stock recovery
Sent from my MB520 using XDA App
how i enter in stock recovery? maybe with volume-down + power? if is this on my bravo not works! the screen freeze with triangle and android
ps: thks for the answers rdannar
Once on triangle screen you mush volume button...both up and down together w
Sent from my MB520 using XDA App
thanks rdannar! it's worked!
i used your instruction (STOCK RECOVERY):
1 - with bravo turn off hold volume-down + power button
2 - with triangle and android on the screen hold volume down + volume up
3 - scrolling the "voices" with volume buttons on the wipe data... and confirm with power button
4 - after 2-3 minutes the bravo restarts at factory conditions
Thanks danner on my next day off i'll try to post a SBF Issues thread or something to HOPEFULLY prevent you from having to explain how to view the menu on stock recovery yet again XD
rubbachicken, in my country we say "no one is born learned" (Naples to be exact) .... is 2 days that I try on the net without finding anything about it .... and tonight I decided to disturb you surely know more than me ... I hope this post serves as to who will be in this situation. rdannar thank you again for helping me.
He wasn't trying to be a jerk. It has been pointed out a lot of times how to fix this problem. On that I remember when I posted the fix myself the first time it took a lot of searching. So we understand that there is no one spot that says how to do this and making one topic on this would help a lot of people. So don't think he was calling you out our anything, just pointing out an obvious thread discussion ;-)
Sent from my HTC Glacier using XDA App
i apologize for the misunderstanding.
you didn't disturb me and I didn't mean to sound bothered...
You always help.. People just dont see it right away. I see it though
Cheers
Sent from my MB520 using XDA App
Thanks a lot!!!! I got similar problem after I RSD with the original ROM. I would like to say hundrdeds of "Thank You"!
Recovery not working?
I know how to boot into recovery, but after I flashed the stock .sbf and tried to wipe data as previously said in this post, once I was on the screen with the triangle and Android, I couldn't go any further. I tried pressing both volume buttons as said.

Bricked Defy plz help! =(

hey ppl plz help meh here..i have defy red lens & had a custom rom CM10..everything was workin fine until i install an app called - Font Installer *Root*..it caused bootloops..so i flashed JRDNEM_U3_3.4.3-36-1.7.sbf... (yes i know how to flash via rsd lite and did before also..) but this time..my phone keeps restartin even after gettin back to froyo.. plz help meh..
Have you wiped data and caches before flashing the sbf?
can you get to the bootloader or it is fully bricked?
SIDANE99 said:
hey ppl plz help meh here..i have defy red lens & had a custom rom CM10..everything was workin fine until i install an app called - Font Installer *Root*..it caused bootloops..so i flashed JRDNEM_U3_3.4.3-36-1.7.sbf... (yes i know how to flash via rsd lite and did before also..) but this time..my phone keeps restartin even after gettin back to froyo.. plz help meh..
Click to expand...
Click to collapse
hey even i did flashed SBF just now .....i done
wipe data/cache
wipe cache
wipe dalvik
wipe bat stats
and after this flashed froyo 2.2.2 SBF .....
Dont worry!
Go to stock recovery(press and hold power+ vol up till the phone boots to stock recovery)
Then you will see an android with triangle. Press vol up and down simultaneously till menu comes. Wipe data and cache. Reboot.
Ps- even after phone shows bootlogo dont let go of power and vol up buttons.
Sent from my MB526 using xda app-developers app
yes when those bootloops started..meh did wiped cache..and flashed through rsd..now it shows the startin screen.. "touch android icon to start" then before even touchin it..fone restats..
Try what i said. I had same problem.
Sent from my MB526 using xda app-developers app
kadavil said:
Dont worry!
Go to stock recovery(press and hold power+ vol up till the phone boots to stock recovery)
Then you will see an android with triangle. Press vol up and down simultaneously till menu comes. Wipe data and cache. Reboot.
Ps- even after phone shows bootlogo dont let go of power and vol up buttons.
Sent from my MB526 using xda app-developers app
Click to expand...
Click to collapse
+1
kadavil said:
Dont worry!
Go to stock recovery(press and hold power+ vol up till the phone boots to stock recovery)
Then you will see an android with triangle. Press vol up and down simultaneously till menu comes. Wipe data and cache. Reboot.
Ps- even after phone shows bootlogo dont let go of power and vol up buttons.
Sent from my MB526 using xda app-developers app
Click to expand...
Click to collapse
hey but by holdin power + vol up button..it shows bootloader.. which says battery ok.. connect usb..(its for flashin sbf)
Then try vol down
Sent from my MB526 using xda app-developers app
& stock recovery? how can i get that now..bkoz my fone is already back to froyo..(stock rom) and meh cant install SndInitDefy for recovery..
"Switch phone off, press and hold volume-down button then switch phone on. When the android with the exclamation mark appears, you have to press both volume keys (for more info, check All-in-one Defy beginners guide)" Motorola Defy Wiki
Then press wipe data and cache, and everything should work
Thats why power+vol down. To boot into stocn recovery. Stock roms have stock recovery.
Sent from my MB526 using xda app-developers app
SIDANE99 said:
& stock recovery? how can i get that now..bkoz my fone is already back to froyo..(stock rom) and meh cant install SndInitDefy for recovery..
Click to expand...
Click to collapse
Stock recovery is from Stock ROM. Hence the word Stock in both
Edit: Woah, too many people trying to help one person Oh and wrong forum ofc...should be in General!
UM
SIDANE99 said:
& stock recovery? how can i get that now..bkoz my fone is already back to froyo..(stock rom) and meh cant install SndInitDefy for recovery..
Click to expand...
Click to collapse
>first download stock sbf from here and then download download and open up rsd lite.
>then hold power+volume up and go into bootloader, plug in your phone and install the sbf.
>then when the phone starts up, pull battery out and wait.
>after inserting battery again, hold volume down+power till an android image comes, then press volume buttons up and down.
>wipe data/factory reset!
once its done, reboot.
hope it works!
THIS SHOULD BE IN THE Q/A SECTION. Moderators please do the needful!
FINALLYYY!!!! it worked!! thank you guys..!!! :good:
SIDANE99 said:
FINALLYYY!!!! it worked!! thank you guys..!!! :good:
Click to expand...
Click to collapse
No problem
Sent from my MB526 using xda app-developers app
hey guys plz dont try to install this app from market..i just read..many ppl complained in the comments for brickin thea fone..
https://play.google.com/store/apps/...SwxLDEsImNvbS5qcnVtbXkuZm9udC5pbnN0YWxsZXIiXQ..
SIDANE99 said:
hey guys plz dont try to install this app from market..i just ready..many ppl complained in the comments for brickin thea fone..
https://play.google.com/store/apps/...SwxLDEsImNvbS5qcnVtbXkuZm9udC5pbnN0YWxsZXIiXQ..
Click to expand...
Click to collapse
Not app fault. Worked for me on gingerbread. Maybe ICS issue.
Sent from my MB526 using xda app-developers app
This is dev section.....not bricking guide....go to gen section.....moderator pls delete it....
Sent from my MB526 using xda app-developers app

[Q] Phone stuck in Fastboot

Tried to install CWM and the phone just locked up on me in fastboot screen. Any ideas?
Tiplite2004 said:
Tried to install CWM and the phone just locked up on me in fastboot screen. Any ideas?
Click to expand...
Click to collapse
Nevermind the battery died and it rebooted itself.
Was the flash successful? Did it boot to CM?
No and I'm to scared to try it again lol
Sent from my X909 using xda app-developers app
Tiplite2004 said:
No and I'm to scared to try it again lol
Sent from my X909 using xda app-developers app
Click to expand...
Click to collapse
Rule #1. Don't flash on low battery.
sent from my <OPPO Find 5>
Coreym said:
Rule #1. Don't flash on low battery.
sent from my <OPPO Find 5>
Click to expand...
Click to collapse
Isn't it just a good idea to have it on the charger while flashing? Or does this have a negative effect?
Can someone make a Cwm installation video. I'm having a rough time installing it to my phone. My previous phones were Galaxy II and III and cwm installation was way easier
Sent from my X909 using xda app-developers app
Tiplite2004 said:
Tried to install CWM and the phone just locked up on me in fastboot screen. Any ideas?
Click to expand...
Click to collapse
press power bottom 10-15 seconds
If TWRP is an option for you you can install it using the GooManager app, install the GooManager app, open it press the menu button go to install openrecoveryscript it'll say this will download and write a recovery image to your device. Press Yes.
It then asks you if you want to install openrecovery-twrp-2.5.0.0-find5.img, this is the latest version made by Kamma and Dees_Troy I believe.
This should help you out.
Jell0zz said:
If TWRP is an option for you you can install it using the GooManager app, install the GooManager app, open it press the menu button go to install openrecoveryscript it'll say this will download and write a recovery image to your device. Press Yes.
It then asks you if you want to install openrecovery-twrp-2.5.0.0-find5.img, this is the latest version made by Kamma and Dees_Troy I believe.
This should help you out.
Click to expand...
Click to collapse
It freaking worked!!!! It only took 30secs literally. You should post this in the Development bro. "Call it Twrp for dummies" lol thanks again
Sent from my X909 using xda app-developers app
Alright There is an issue with a find 5 that i tried to trouble shoot. The owner of this find 5 is able to boot into fastboot but not into recovery. No matter how many times I tried to flash recovery, it always did but the phone refused to enter recovery. First, it doesnt even start without a power source. whether it be a connection to the computer or power outlet, it needs as a power source, and when it doesn, holding the volume down + power it goes from the oppo screen to a black screen. Anyone have any idea? I even flashed the rom though fastboot (which i didnt know could be done but apparently it can) and it still didnt turn on and still had the same issues
Tiplite2004 said:
It freaking worked!!!! It only took 30secs literally. You should post this in the Development bro. "Call it Twrp for dummies" lol thanks again
Sent from my X909 using xda app-developers app
Click to expand...
Click to collapse
No problem , glad to hear you got it working.
osmosizzz said:
Alright There is an issue with a find 5 that i tried to trouble shoot. The owner of this find 5 is able to boot into fastboot but not into recovery. No matter how many times I tried to flash recovery, it always did but the phone refused to enter recovery. First, it doesnt even start without a power source. whether it be a connection to the computer or power outlet, it needs as a power source, and when it doesn, holding the volume down + power it goes from the oppo screen to a black screen. Anyone have any idea? I even flashed the rom though fastboot (which i didnt know could be done but apparently it can) and it still didnt turn on and still had the same issues
Click to expand...
Click to collapse
You have a bad recovery.img try downloading it again.

[Q] Bricked S4?

I seem to have bricked my S4.. Here's what I did... I was flashing the KT kernel, and accidentally downloaded the wrong version. After flashing, my phone will do nothing more than sit on a black screen and vibrate every 2 seconds. I used Odin to return to stock, and it completed successfully. It still does nothing more than sit on a black screen and vibrate. Can anyone help? Sorry for the new thread, but I'm desperate. Thanks for any help.
Have you tried using kies?
Pull your battery and wait a few seconds. Reinsert the battery and press the recovery combo (vol up + home + power. Release just the power button when the device vibrates and you see the blue script in the top left corner of the screen). If this gets you into stock recovery, wipe data, cache and reboot.
xBeerdroiDx said:
Pull your battery and wait a few seconds. Reinsert the battery and press the recovery combo (vol up + home + power. Release just the power button when the device vibrates and you see the blue script in the top left corner of the screen). If this gets you into stock recovery, wipe data, cache and reboot.
Click to expand...
Click to collapse
I've been having the same problem and have tried this method numerous times with no results. The phone simply will not boot into recovery, even after restoring to factory using Odin. It's incredibly frustrating. I'm at my wit's end.
Another person had a very similar problem last night. He was able to use kies to get the phone working. Give that a try.
Edit http://forum.xda-developers.com/showthread.php?p=45207338
It won't go into recovery at all. I'll be trying to restore with kies tonight, and I'll post results. Thanks guys.
Sent from my LT30at using xda app-developers app
So kies didn't go so well. It will not connect to my phone at all. I've tried in download mode, and it just will not connect. Any other ideas?
Sent from my LT30at using xda app-developers app
l337m45732 said:
So kies didn't go so well. It will not connect to my phone at all. I've tried in download mode, and it just will not connect. Any other ideas?
Sent from my LT30at using xda app-developers app
Click to expand...
Click to collapse
I had the same exact problem. Someone told me to rewrite the partition table and flash but I don't know what that means and the person who suggested this failed to elucidate. It's crazy that there's no info on this situation ANYWHERE.
I've been digging, and digging, AND DIGGING, and I haven't found a solution other than JTAG and RIFFBOX. I've read good and bad things. Looks like this phone is now a paperweight. Maybe one day there'll be a not-so-ridiculous solution.

Categories

Resources