[Q] RUU for 32b (Is it not possible?) - myTouch 3G, Magic General

I have a T-Mobile 32b.
I'm going use the RUU provided here.
http://forum.xda-developers.com/showthread.php?t=887213
Being that it's an .exe file, is this something that can be run on the PC while having the phone connected via USB?
Also, what preparations do I need to make on the phone before I do this? ex. Does the phone need to be in recovery mode for this to work?
Google USB drivers are already installed.
Thanks for the help all.

i think you have to set your phone into fastboot mode.
(Shut down your phone -> press volume down + power)

God.... This is sooo frustrating.
I have the right device and the right RUU. The RUU and PC recognizes the device and I'm getting unknown error 155. I can't think of anything else where I'm going wrong...
My Device:
Stock Froyo 2.2.1
SAPPHIRE PVT 32B SHIP S-ON G
HBOOT-1.33.0013 (SAPP30000)
CPLD-10
RADIO-2.22.28.25
Oct 21 2009, 22:33:27

Related

fastboot remote: not allow

i tried to root my HTC magic indonesia, but when i tried to fastboot, it gives me this error message: fastboot failed, remote: not allow
any idea?
thanks
im having the same issue... i just got a htc magic 32b board... im coming from a tmobile g1... which i have flashed tons of roms on... but on this one in fastboot i keep getting that not allow message does anyone know anything about this
also running into the same issue. any help would be great.
Could you list the SPL version for which you have this problem?
E.g. : HBOOT-1.33.0004 (SAPP10000) : Sapphire PVT 32B SHIP S-ON G : CPLD-10
HBOOT-1.33.0006 (SAPP30000)
Sapphire PVT 32B SHIP S-ON G
CPLD-10
Synseer said:
HBOOT-1.33.0006 (SAPP30000)
Sapphire PVT 32B SHIP S-ON G
CPLD-10
Click to expand...
Click to collapse
same as above
Same Issue...
Sapphire PVT 32B SHIP S-ON G
HBOOT-1.33.0006 (SAPP30000)
CPLD-10
RADIO-2.22.19.26I
May 27 2009,19:06:41
SPL
Sapphire PVT 32A Ship S-On H
HBOOT 1.33.0010 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
Jun 2 2009, 17:28:20
any help?
thanks
operating system?
MAC? LINUX? XP? VISTA?
I am using linux and having this issue...
Im using XP
ok well then the problem doesnt seem to be isolated to a single operating system... maybe the bootloader is somehow blocking fastboot???
Amon_RA said:
Could you list the SPL version for which you have this problem?
E.g. : HBOOT-1.33.0004 (SAPP10000) : Sapphire PVT 32B SHIP S-ON G : CPLD-10
Click to expand...
Click to collapse
Any ideas thus far? Is the SPL the issue or is it our pc's???
Heard that on mytouch had the same thing to.
this is driving me nuts... and no one has any insite... i have tried to contact haykuro but he never responds... i really wish someone knew something... my phone will let me adb shell but i can not do anything with it... everything is permission denied... which sucks... and my fastboot wont allow... ugh i really want to root this phone and have it like my g1
What does 'fastboot devices' show?
I seem to remember having that problem before I had everything setup correctly
running the command
fastboot devices
still shows the device properly, it seems permissions have been altered due to the widespread use of rooting ones phone... seems like a preventative measure some carriers have taken
SPL
Is there anyone on the boards that know more about the SPL? maybe a way to replace this SPL with another before gaining root??? there's got to be a way... i know there is a genius on here somewhere...
maybe!?
Ok how about this, I'm using linux and when the device is plugged in for adb the command lsusb lists the device as having productid of 0c02. Now when I switch the device to fastboot, lsusb gives productid of 0fff. But shouldn't it read 0c01 ??? I almost think this is where the problem lies. Is there a way to change this so that the fastboot executable communicates with the correct productid?
I have a feeling that the SPL on these devices is checking the signature on the file before booting it, where previous versions didn't do this.
signature
Checking the signature on what file before it boots?

*HELP* Bricked / Not Bricket no clue.

Hi,
Firstly i would like to thank everyone for any help they can provide.
First some information -
I originally had an:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0009 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
MAY 8 2009. 21:02:32
Using this post here: [32A][HOW-TO] Upgrade to 6.35.07.29 Radio and 1.76.2007 SPL (Downgrade/Revert too!)
I managed to upgrade my SPL and Radio to:
SAPPHIRE PVT 32A ENG S-ON H
HBOOT-1.76.2007 (SAPP10000)
CPLD-12
RADIO-6.35.07.29
Aug 21 2009, 18:19:15
I would like to point out I was originally trying to do update to this: [ROM][32A] CursorSense32A-1.0 FINAL! Fast, stable 1.5 Sense UI ROM! [01-12-10]
After everything said and done as soon as the phone started it went to an endless loop, switching off and switching on. I tried getting into recovery (Home + Switch on) but it would stay there for a second and then reboot again. Tried getting into Fastboot (Back + Switch on) which initially i was glad to see the white screen popup but now adb devices nor fast boot devices detect the phone i get no devices listed.
I have tried re-installing the usb drivers, rebooting the pc and the phone a billion times just about everything but nothing works. I can't do anything from recovery because it stays there for a few seconds and reboots again and without fastboot i can't manage to flash it into recovery either nor can i push any files to the phone. (Even tried connecting the phone to my mac and see if i could get some sort of access to the phone but i get nothing).
I would appreciate any help pertaining to this problem.
*UPDATE*: I don't know how but i can finally see the device under fastboot devices. I am guessing the best way to go is flash another SPL even though i have the one that is to be used by the CursorSense, any suggestions? Should i try re-flashing the SPL?
**UPDATE (2)*: Tried [32A][HOW-TO] Upgrade to 6.35.07.29 Radio and 1.76.2007 SPL (Downgrade/Revert too!)
but it fails with (remote: signature verify fail)
*sigh* any suggestions....

[Q] is my phone bricked?

Alright, so i got this phone from a friend to try to fix, as i've done some work with android phones before, mostly just following directions from various forums on this website.
the phone is stuck at its bootloader scree. this is what it says
SAPPHIRE PVT 32B SHIP S-ONG
HBOOT-1.33.0006 (SAPP30000)
CPLD-10
RADIO-2.22.19.26I (i, not 1)
May 27 2009, 19:06:41
HBOOT (i believe its selected)
<BACK> FastBoot Mode
i can't do anything. buttons don't seem to do anything, and windows doesn't recognize the phone when i plug it in.
there's no SD or SIM card in it, but i can get one if i need to load a file.
please help me. i have no idea what to do

[Q] Help! Did i realy bricked my Magic / Sapphire 32A

i still think my Magic (32a) is bricked...
The display shows only
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0009 (SAPP10000)
CPLD-12
RADIO-6.35.08.29
Dec 08 2009, 17:38:48
RUU
I tried a lot of things that i could find in the internet
When i try some commands at DOS (whatever i tried) i says everytime "device not found"
Strange: My Notebook whit WIN XP an GUI 4.01 couldn't flash anything, but it "see" my Magic and shows me this information (i've wrote)...nothing works but reboot whit GUI is possible....
Is my Magic defnitfly bricked? I'm a noob but i try to learn all this stuff
Thanks for every good idea
the-saint said:
i still think my Magic (32a) is bricked...
The display shows only
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0009 (SAPP10000)
CPLD-12
RADIO-6.35.08.29
Dec 08 2009, 17:38:48
RUU
I tried a lot of things that i could find in the internet
When i try some commands at DOS (whatever i tried) i says everytime "device not found"
Strange: My Notebook whit WIN XP an GUI 4.01 couldn't flash anything, but it "see" my Magic and shows me this information (i've wrote)...nothing works but reboot whit GUI is possible....
Is my Magic defnitfly bricked? I'm a noob but i try to learn all this stuff
Thanks for every good idea
Click to expand...
Click to collapse
You didnt brick it it cant do fastboot commands because you have perfected spl, you need to flash eng spl via recovery and then use Eyegor's radio swithcer

[Q] Sapp310 32 A Can't exit Ruu mode

I used to rooted and unlocked this phone. And installed a rom. Then I think I installed a wrong HBOOT or a radio and it bricked. I tried to debrick but it didn't work. Then I put the phone aside for a while. Now I want to make it work again. I did a lot stuff on it that I don't remember. Now phone starts in RUU mode.
I'm a noob so I don't know every commands or how these things work so I followed some guides but I've got errors every time. Is my phone bricked totally? Is JTAG necessary? or is there a way to get out from RUU mode and install correct HBOOT and RADIO? or if those correct than what am I doing wrong? This is a My Touch 3G T-mobile. And it says Sapp310 under the battery and there's an A next to barcodes. I don't know if it means 32A or not.
Recently the phone has
------------------------------------
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0008 (SAPP31000)
CPLD-13
RADIO-6.35.08.29
Nov 3 2009, 15:56:29
RUU
-------------------------------------
Please help me and guide me to fix this phone. Thank you.

Categories

Resources