i tried to root my HTC magic indonesia, but when i tried to fastboot, it gives me this error message: fastboot failed, remote: not allow
any idea?
thanks
im having the same issue... i just got a htc magic 32b board... im coming from a tmobile g1... which i have flashed tons of roms on... but on this one in fastboot i keep getting that not allow message does anyone know anything about this
also running into the same issue. any help would be great.
Could you list the SPL version for which you have this problem?
E.g. : HBOOT-1.33.0004 (SAPP10000) : Sapphire PVT 32B SHIP S-ON G : CPLD-10
HBOOT-1.33.0006 (SAPP30000)
Sapphire PVT 32B SHIP S-ON G
CPLD-10
Synseer said:
HBOOT-1.33.0006 (SAPP30000)
Sapphire PVT 32B SHIP S-ON G
CPLD-10
Click to expand...
Click to collapse
same as above
Same Issue...
Sapphire PVT 32B SHIP S-ON G
HBOOT-1.33.0006 (SAPP30000)
CPLD-10
RADIO-2.22.19.26I
May 27 2009,19:06:41
SPL
Sapphire PVT 32A Ship S-On H
HBOOT 1.33.0010 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
Jun 2 2009, 17:28:20
any help?
thanks
operating system?
MAC? LINUX? XP? VISTA?
I am using linux and having this issue...
Im using XP
ok well then the problem doesnt seem to be isolated to a single operating system... maybe the bootloader is somehow blocking fastboot???
Amon_RA said:
Could you list the SPL version for which you have this problem?
E.g. : HBOOT-1.33.0004 (SAPP10000) : Sapphire PVT 32B SHIP S-ON G : CPLD-10
Click to expand...
Click to collapse
Any ideas thus far? Is the SPL the issue or is it our pc's???
Heard that on mytouch had the same thing to.
this is driving me nuts... and no one has any insite... i have tried to contact haykuro but he never responds... i really wish someone knew something... my phone will let me adb shell but i can not do anything with it... everything is permission denied... which sucks... and my fastboot wont allow... ugh i really want to root this phone and have it like my g1
What does 'fastboot devices' show?
I seem to remember having that problem before I had everything setup correctly
running the command
fastboot devices
still shows the device properly, it seems permissions have been altered due to the widespread use of rooting ones phone... seems like a preventative measure some carriers have taken
SPL
Is there anyone on the boards that know more about the SPL? maybe a way to replace this SPL with another before gaining root??? there's got to be a way... i know there is a genius on here somewhere...
maybe!?
Ok how about this, I'm using linux and when the device is plugged in for adb the command lsusb lists the device as having productid of 0c02. Now when I switch the device to fastboot, lsusb gives productid of 0fff. But shouldn't it read 0c01 ??? I almost think this is where the problem lies. Is there a way to change this so that the fastboot executable communicates with the correct productid?
I have a feeling that the SPL on these devices is checking the signature on the file before booting it, where previous versions didn't do this.
signature
Checking the signature on what file before it boots?
Hi,
Firstly i would like to thank everyone for any help they can provide.
First some information -
I originally had an:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0009 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
MAY 8 2009. 21:02:32
Using this post here: [32A][HOW-TO] Upgrade to 6.35.07.29 Radio and 1.76.2007 SPL (Downgrade/Revert too!)
I managed to upgrade my SPL and Radio to:
SAPPHIRE PVT 32A ENG S-ON H
HBOOT-1.76.2007 (SAPP10000)
CPLD-12
RADIO-6.35.07.29
Aug 21 2009, 18:19:15
I would like to point out I was originally trying to do update to this: [ROM][32A] CursorSense32A-1.0 FINAL! Fast, stable 1.5 Sense UI ROM! [01-12-10]
After everything said and done as soon as the phone started it went to an endless loop, switching off and switching on. I tried getting into recovery (Home + Switch on) but it would stay there for a second and then reboot again. Tried getting into Fastboot (Back + Switch on) which initially i was glad to see the white screen popup but now adb devices nor fast boot devices detect the phone i get no devices listed.
I have tried re-installing the usb drivers, rebooting the pc and the phone a billion times just about everything but nothing works. I can't do anything from recovery because it stays there for a few seconds and reboots again and without fastboot i can't manage to flash it into recovery either nor can i push any files to the phone. (Even tried connecting the phone to my mac and see if i could get some sort of access to the phone but i get nothing).
I would appreciate any help pertaining to this problem.
*UPDATE*: I don't know how but i can finally see the device under fastboot devices. I am guessing the best way to go is flash another SPL even though i have the one that is to be used by the CursorSense, any suggestions? Should i try re-flashing the SPL?
**UPDATE (2)*: Tried [32A][HOW-TO] Upgrade to 6.35.07.29 Radio and 1.76.2007 SPL (Downgrade/Revert too!)
but it fails with (remote: signature verify fail)
*sigh* any suggestions....
i am stuck on RUU/RUU USB window on my htc magic 32a after trying to install the 2.1 update so my internet could work from cyanogen6.
i dont have a goldcard and i cant access adb to make one because the phone cannot boot other than being on the RUU/RUU USB window.
sapphire pvt 32a ship s-on h
hboot-1.76.0010 (sapp50000)
cpld-12
radio-3.22.20.17
jan 14 2010,00:14:58
i dont know what to do :[
My htc magic 32a stuck in RUU mode, after I tried to update my magic to RUU and it failed. I can't even go to Recovery mode, but I can use fastboot in CMD.
and one more thing, I can open my magic everytime I use the fastboot command "fastboot oem boot", after that may magic will powered ON but everytime it will be turned off it will stuck to RUU mode. And I need it first to go through fastboot command "fastboot oem boot" just to open my magic.
I need help... plsss...
======================================================
Before:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0010 (SAPP10000)
CPDL-12
RADIO-6.35.10.18
Jan 14 2010, 00:14:58
After:
SAPPHIRE PVT 32A SHIP S-OFF H
HBOOT-1.76.2007 (SAPP10000)
CPDL-12
RADIO-6.35.10.18
Jan 14 2010, 00:14:58
at first i don't know how to explain what really happened.. LOL its just MUMILOVER change something in my NR and it works like MAGIC!!
its all about MISC (kindda like that) (LOL) MUMILOVER for PRESIDENT!!!! LOL
thank you!!!
I almost forgot. here's my device:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0010 (SAPP10000)
CPDL-12
RADIO-6.35.10.18
Jan 14 2010, 00:14:58
RUU
=========================================
Just saved your device... i will fill in the details later on... must finish a very important presentation and its already 1 am...
I hate to revive an old thread; especially since this isn't a forum I generally would post in, but I have having an issue with my phone.
I had the same issue as the OP, stuck in RUU mode.
I understand that I have the HTC Wildfire S and not the magic, but if you could tell me how the issue was resolved maybe I can apply it to the Wildfire S.
I used to rooted and unlocked this phone. And installed a rom. Then I think I installed a wrong HBOOT or a radio and it bricked. I tried to debrick but it didn't work. Then I put the phone aside for a while. Now I want to make it work again. I did a lot stuff on it that I don't remember. Now phone starts in RUU mode.
I'm a noob so I don't know every commands or how these things work so I followed some guides but I've got errors every time. Is my phone bricked totally? Is JTAG necessary? or is there a way to get out from RUU mode and install correct HBOOT and RADIO? or if those correct than what am I doing wrong? This is a My Touch 3G T-mobile. And it says Sapp310 under the battery and there's an A next to barcodes. I don't know if it means 32A or not.
Recently the phone has
------------------------------------
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0008 (SAPP31000)
CPLD-13
RADIO-6.35.08.29
Nov 3 2009, 15:56:29
RUU
-------------------------------------
Please help me and guide me to fix this phone. Thank you.