Hi all, just got an upgrade this week to the Atrix and thoroughly enjoying it so far. As a poweruser with the HD2 and all the hacks involved like android on nand etc, the first thing I did out of the box was root it.
Now to my point, all the custom roms I'm seeing seem to be for At+t and Bell (is that the right carriers?), and the forum is Atrix 4G. So can I as a UK user use these same roms/radios that are outlined in the development forum?
Any help is appreciated, Thanks in advance.
Greetings. I have the same backround as you . I nearly stayed with my hd2 but i'm glad I didn't. The only gingerbread rom for us is the orange one in the dev forum. I have had no success flashing this yet. Soft bricked 3 times and counting.
There is an international fruit cake in the works rich we will be able to flash from CWM.
So far rooting is fine.
Unlockingbootloader is fine.
flashing Cwm if fine.
I keep meaning to start a t-mob uk thread to collect all the info for us uk tmob users into one place. I will get round to it eventualy if some one doesn't beer me to it.
bates_1974 said:
Hi all, just got an upgrade this week to the Atrix and thoroughly enjoying it so far. As a poweruser with the HD2 and all the hacks involved like android on nand etc, the first thing I did out of the box was root it.
Now to my point, all the custom roms I'm seeing seem to be for At+t and Bell (is that the right carriers?), and the forum is Atrix 4G. So can I as a UK user use these same roms/radios that are outlined in the development forum?
Any help is appreciated, Thanks in advance.
Click to expand...
Click to collapse
Hi there.
I am on Orange U.K, and i have successfully flashed this ROM: http://forum.xda-developers.com/showthread.php?t=1169409. Following this guide to flash the ROM: http://forum.xda-developers.com/showthread.php?t=1167373.
Many international users have flashed this ROM as well but REMEMBER to unlock your bootloader before even considering flashing this ROM.
When unlocking your bootloader, you will notice that you will only have around 300 total RAM but if you flash the hack relevant to your device, you will retain your RAM when you flash to Gingerbread.
Please follow the guide properly and don't skip any step. BTW, if your bootloader is not unlocked, we will probably be getting Gingerbread soon since the SOAK testing is about to begin very soon.
Similar story, i'm on Orange, followed those steps and it's working great. Just had to replace the missing sound files, but apart from that, works a treat.
Sent from my MB860 using XDA App
Now since we have an unlocked bootloader, you can flash any ROM. Just make sure you flash the proper boot.img for your phone. See the fixes section for the pudding thread.
IrshaadH said:
Now since we have an unlocked bootloader, you can flash any ROM. Just make sure you flash the proper boot.img for your phone. See the fixes section for the pudding thread.
Click to expand...
Click to collapse
I thought we still had to be careful with the Roms, as some of them contain files that are tied to the kernel version (until the port everything over). For example, the ninja rom, I believe it is crrently tied to AT&T at the moment. I presumed we had to wait for a safe INTL version..
I think we can install and lunch any Rom now. The only limitation for inte. users is Ram issue. Otherwise will work fine.
Sent from Motorola Atrix
Foka002 said:
I think we can install and lunch any Rom now. The only limitation for inte. users is Ram issue. Otherwise will work fine.
Sent from Motorola Atrix
Click to expand...
Click to collapse
great, thanks. Maybe I'll try another rom then I'd like one without any MotoBlur stuff on it, although the French 2.3.4 is running very well.
Related
I just bought a used Motorola Atrix for a great price and was looking at some of the ways to root the device and everything I have seen makes me very nervous to try anything at the moment.
I have rooted several Nexus One and Nexus S phones and never had any issues but I have been reading that the bootloader and firmware on the Atrix is nothing like any of the devices I have done in the past.
I would love to root and flash a nice custom stable ROM because after being spoiled using CM7, the stock ROM is not going to cut it. Anyone know of a good root method I could use without the fear of bricking this lovely device? Or should I just wait for a better stable process to come down the pike? Any help would be greatly appreciated.
bakron1 said:
I just bought a used Motorola Atrix for a great price and was looking at some of the ways to root the device and everything I have seen makes me very nervous to try anything at the moment.
I have rooted several Nexus One and Nexus S phones and never had any issues but I have been reading that the bootloader and firmware on the Atrix is nothing like any of the devices I have done in the past.
I would love to root and flash a nice custom stable ROM because after being spoiled using CM7, the stock ROM is not going to cut it. Anyone know of a good root method I could use without the fear of bricking this lovely device? Or should I just wait for a better stable process to come down the pike? Any help would be greatly appreciated.
Click to expand...
Click to collapse
So first your going to have to be on 1.26 to get a root. If you've already updated to 1.57 (the OTA update) then you need to flash back to 1.26. Instructions here: http://forum.xda-developers.com/showthread.php?t=991072
Then you can root, retain that root, update to 1.57 (OTA Update), and get your root back. Instructions here: http://forum.xda-developers.com/showthread.php?t=1016060
Then after you are done updating and getting your root back, you can install CWM (this is what the current roms are using to install), much better than adb. Instructions here: http://forum.xda-developers.com/showthread.php?t=1019143
Then you can either use GladAtrix Rom or Gingerblur (this is what I'm currently running). Both of these will deodex your system, theme your atrix, and give you the option to install various mods/hacks. Check the dev forum to see which one you think you would rather have.
Got all that???
I know it seems like a lot, but if you read and follow the directions, it's pretty fool proof, despite all the noob questions and problems to the contrary. If you have any questions or problems, just ask.
Swiftks...you should take you're reply and post it in general as a basic how to for the atrix...
Sent from my MB860 using Tapatalk
hey my play comes in the 3erd and i will like to know is there any working ICS roms for it and how to go about doing every thing i need to. i use to have the lg ally running velocity v1.2 but by the looks of it with my new play i have flashing roms and recover look way harder then the ally was so i need some info guys and a guide and what roms are save to flash and what recovery do i need to have also and thanks for you help also!!!
I havent seen any ICS roms for the r800x but recovering/flashing roms is made very very easy with this from the android market "Xperia CWM Auto-Instaler"
You don't even need to unlock the bootloader, just needs to be rooted and then go about setting up the Xperia CWM Auto-Instaler and just make a nandroid backup. I would reccommend using Cola's rom or IT-ROM (which is based off of Cola's rom) for the r800x, they both have worked perfectly for me and I'm currently running IT-ROM which definitely makes the r800x run much smoother/faster.
Wifi, 3g, sms, ect all worked without any issues, and if you're somone who is worried about being able to overclock, I know someone is working on that with Cola's rom, but I dont think it's finished yet. But, those roms take care of basically any speed issues one may have with their r800x, it definitely did the trick for me.
Good luck
SoberCanoe said:
I havent seen any ICS roms for the r800x but recovering/flashing roms is made very very easy with this from the android market "Xperia CWM Auto-Instaler"
You don't even need to unlock the bootloader, just needs to be rooted and then go about setting up the Xperia CWM Auto-Instaler and just make a nandroid backup. I would reccommend using Cola's rom or IT-ROM (which is based off of Cola's rom) for the r800x, they both have worked perfectly for me and I'm currently running IT-ROM which definitely makes the r800x run much smoother/faster.
Wifi, 3g, sms, ect all worked without any issues, and if you're somone who is worried about being able to overclock, I know someone is working on that with Cola's rom, but I dont think it's finished yet. But, those roms take care of basically any speed issues one may have with their r800x, it definitely did the trick for me.
Good luck
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=14815942&postcount=4 i found this can you give me some info on flashing it and thanks
Read more prior to posting... There's a lot of info in here (no ICS), and unless you take the time to sift through it all and understand it, you will mess up your phone.
Weudel said:
Read more prior to posting... There's a lot of info in here (no ICS), and unless you take the time to sift through it all and understand it, you will mess up your phone.
Click to expand...
Click to collapse
ya i know that as i have done all of this with the ally but what i dont know is with this http://forum.xda-developers.com/showpost.php?p=14815942&postcount=4 do i root and then flash the recover and then install the rom because i know the recovery does not work with stock and thats what i will be on or do i install the rom and then the recovery if i have more info on this then im good
How are planning on installing the ROM without recovery? Seriously, read everything again so you don't brick your phone.
And make sure you're installing a ROM for locked bootloaders.... If you try to install that CM7 ROM it'll likely never boot again.
Weudel said:
How are planning on installing the ROM without recovery? Seriously, read everything again so you don't brick your phone.
And make sure you're installing a ROM for locked bootloaders.... If you try to install that CM7 ROM it'll likely never boot again.
Click to expand...
Click to collapse
ok i looked up some info and i can not unlock my bootloader on the R800x i am so happy i did not try and flash the CM7 lol
you can unlock your boot loader it just cost $$ , someone with setool , a paper clip and not minding voiding your warrantee. I would not suggest it until you've gotten a bit experience under your belt but when you get there its worth having done in my opinion , many people vary on this subject and they're right also.
There is limited real benefit to unlocking the R800x, since the devs have been focusing on the locked ROMs... Not much out there, unless you're planning to develop it yourself.
Weudel said:
There is limited real benefit to unlocking the R800x, since the devs have been focusing on the locked ROMs... Not much out there, unless you're planning to develop it yourself.
Click to expand...
Click to collapse
Indeed, fully functional cm7 is hardly worth unlocking your bootloader for
(Sarcasm)
Sent from my R800x using xda premium
I wood like to make some Rom for the locked bootloader and unlocked bootloader but irony have the stuff and dint know how dint have no one to teach me
Sent from my R800x using XDA App
Hello Everyone,
I am a new Atrix owner who just received the phone with .91 installed.
Before I go to a custom ROM (CM7, ICS, etc), I always like to check out the factory ROM to see what its all about.
Obviously, AT&T is hounding me to upgrade to .141, which is something I would like to do just to see any changes/improvements.
If I upgrade to .141, I see there's a new way to root the phone (well, it looks new anyway) -- how about installing custom ROMs, am I still able to do that if I go to .141? I've been trying to read as much as I can. It appears there are issues with going to .141 if you have a unlocked bootloader, but that isn't me (yet!).
Thanks,
Chris
I would unlock the bootloader first then flash a fruitcake of the new update. The fruitcake will be the same as if you updated normally but you will maintain your unlocked bootloader and root without the risk of bricking your phone. That way if you don't like it you can switch to a custom ROM. As far as I'm aware you can't unlock the bootloafer once you update. I could be wrong about that though.
Sent from my MB860 using XDA App
1. +1, it would make more sense to just flash a fruitcake
2. Yes, you can unlock the bootloader if you have updated to .141, but I have only read it working for people who had previously unlocked it.
jadwv2210 said:
I would unlock the bootloader first then flash a fruitcake of the new update. The fruitcake will be the same as if you updated normally but you will maintain your unlocked bootloader and root without the risk of bricking your phone. That way if you don't like it you can switch to a custom ROM. As far as I'm aware you can't unlock the bootloafer once you update. I could be wrong about that though.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Thanks to you both for responding -- I'm still trying to read up on the Atrix, so having this info really helps. I will go ahead and unlock/root with .91 and then do a Fruitcake upgrade (and then eventually do a real ROM! )
Thanks again guys for your replies. I really like the phone so far -- screen is just the right size, battery life is very nice (a huge plus), and its thin and light. Good stuff!
Chris
Hi,
I'm about to order an (unlocked) atrix on amazon but I still got a few things I want to be sure about before I do.
1. If I buy an unlocked atrix it should work perfectly fine in germany, right? I've read about some wifi problems but I heard they don't occur with the newer versions and there are also fixes available. Is that how it is?
2. I can run this script (http://forum.xda-developers.com/showthread.php?t=1182871) to at first unlock the bootloader and then root & install recovery, right? So basicall after I run this script I can just download a rom and install it via recovery just like on any other android phone, right?
Thanks in advance
1. Yes. I have AT&T Atrix, traveling around and works everywhere including Germany
2. Yes, I used it to unlock and root. Anyway, be very careful. Read all guide few times, understand it, charge battery, prepare yourself... and good luck.
Just remember, one unlock is for carrier and second is for bootloader. If you buy unlocked phone, it means unlocked from carrier. Unlocking booloader you are going to lose warranty.
Zeljko1234 said:
2. Yes, I used it to unlock and root. Anyway, be very careful. Read all guide few times, understand it, charge battery, prepare yourself... and good luck.
Click to expand...
Click to collapse
+1000 to this. You need to be 100% sure before doing anything with this phone. It is brickable. The key here is to avoid flashing SBF files. As long as you flash stuff with CWR, you are fine. Good luck. And don't hesite to buy the Atrix, its a pretty nice phone. Im very impressed with it.
Wifi issue has been confirmed one year ago for the Atrixs were running on the first firmware (Froyo 2.2 - FW version 1.2.6). But just after a bit of time, Moto realeased new update and issue has been corrected and the wifi has been being amazing till now
There are two unlockings. Carrier unlocking and bootloader unlocking. Both allow you to take the atrix out of AT&T to use worlwide and install any custom rom, especially CM7 or Webtop full Ubuntu mod, the ones defined what is a power device
Sent from my MB860 using xda premium
Hi,
I recently purchased an Atrix 4G for cheap and am now trying to update it to a more recent firmware version.
I currently have a:
MB860
on Android 2.2.2
running Version.4.4.20.MB860.Retail.en.DE
Checking for system updates through the phone doesn't yield any results. Threads on the web or this forum often lead to dead links or warnings about RAM problems or the possibility of bricking my device.
I'm not technologically retarded (as in I can jailbreak and install packages on an iPhone) but most of the update/flashing instructions aren't really helpful for someone who's just getting into android.
Where do I start?
I would start with the sticky at the top of this section (http://forum.xda-developers.com/showthread.php?t=1984381), or skip to the 4th sticky (http://forum.xda-developers.com/showthread.php?t=1302423).
It is written step by step.
I'm not trying to unlock my bootloader on 2.3.4, because my phone isn't running 2.3.4. I can't find any info regarding help for people still stuck on FroyoYo there, either.
The bootloader is irrespective of the version of Android you are running. Follow the directions to unlock it first, install an alternate recovery and then flash whatever you like.
TGHI said:
The bootloader is irrespective of the version of Android you are running. Follow the directions to unlock it first, install an alternate recovery and then flash whatever you like.
Click to expand...
Click to collapse
Thanks for the info. So doing this allows me to install Custom ROMs on my Atrix? While that is indeed useful, it doesn't really answer my initial question.
Is there a way to update my phone to 2.3.4 without rooting or unlocking first? I'm currently just looking for a stable webtop experience and decent battery life. If I get that on Stock 2.3.4, I might wait with the flashing experiments.
Go to settings, about, and check for updates. (if memory serves me correctly)
エイトリックス から 送ります
you need to go to motorola website and download system updater....
Sent from my MB860 using xda app-developers app
thesummoner101 said:
Go to settings, about, and check for updates. (if memory serves me correctly)
Click to expand...
Click to collapse
This tells me that my device is up-to-date.
you need to go to motorola website and download system updater....
Click to expand...
Click to collapse
The threads in the development forum warn about installing official updates. Do I risk bricking my device if I install a custom rom after using the system updater?
Placeb00 said:
Thanks for the info. So doing this allows me to install Custom ROMs on my Atrix? While that is indeed useful, it doesn't really answer my initial question.
Is there a way to update my phone to 2.3.4 without rooting or unlocking first? I'm currently just looking for a stable webtop experience and decent battery life. If I get that on Stock 2.3.4, I might wait with the flashing experiments.
Click to expand...
Click to collapse
You DO NOT want the latest stock update if you're planning on doing tinkering down the road. As far as I understand it, one of the latest OTAs pretty much blocks you from unlocking the bootloader. (Same for the Photon)
With this phone, if you put your faith on Motorola, you get royally screwed. I would break from the shackles sooner rather than later.
littleemp said:
As far as I understand it, one of the latest OTAs pretty much blocks you from unlocking the bootloader. (Same for the Photon).
Click to expand...
Click to collapse
Where are you getting this from?
A little update:
Rooted, unlocked my bootloader, flashed a 2.3.6 ROM. Everything works fine, and I'm really happy with my new phone/netbook combo.
Placeb00 said:
A little update:
Rooted, unlocked my bootloader, flashed a 2.3.6 ROM. Everything works fine, and I'm really happy with my new phone/netbook combo.
Click to expand...
Click to collapse
Could you post link where did you tutorial. I have retail Eu version and don't know where to start.
On samsung or sony its much simpler.
Or I have become more stupid
Thanks
Sent from my MB860 using xda app-developers app
http://forum.xda-developers.com/showthread.php?t=1302423
This is the tutorial I used.
Placeb00 said:
http://forum.xda-developers.com/showthread.php?t=1302423
This is the tutorial I used.
Click to expand...
Click to collapse
Thank you.
Sent from my MB860 using xda app-developers app
revdep-rebuild error
For what it's worth:
Editing /usr/bin/revdep-rebuild.sh with nano and changing 2 instances of /var/cache to /preinstall/var/cache resolved all my problems.
More specificly:
line 262: "$WORKING_DIR" != "/var/cache/${APP_NAME}"
and
line 559: local tmp_target=var/cache/${APP_NAME}
Good luck.
just follow the official CM guide for atrix. that's the best