Database Users

Stuck on align screen

I did a hard resett on my phone now i can get past my align screen. I keep pressing on the + but nothing happens. Anyone who can help?

kwan80 said:
I did a hard resett on my phone now i can get past my align screen. I keep pressing on the + but nothing happens. Anyone who can help?
Click to expand...
Click to collapse
try another hard reset

elmarko99 said:
try another hard reset
Click to expand...
Click to collapse
i have, it like the there is no respons on the screen i keep pressin the + but nothing happens it just goes around and around.

http://www.codefactory.es/downloads/mobile_speak_pocket/Remote_ScreenAlignment_Manual.doc
see if this will help you.
Also to disable calibration you should create a file named "welcome.not" (without quotes) in the root directory of your storage card. This will skip the whole "welcome" process and may cause Extended_ROM programs not to be installed. (credit: mamaich)
Hope this helps.

thesire said:
http://www.codefactory.es/downloads/mobile_speak_pocket/Remote_ScreenAlignment_Manual.doc
see if this will help you.
Click to expand...
Click to collapse
Thanx for the fast reply. But there is no touch hd to choose under the htc menu

i even have sprite backup file, but even when o do the backup i get to the align screen.

kwan80 said:
i even have sprite backup file, but even when o do the backup i get to the align screen.
Click to expand...
Click to collapse
did you try the other option i suggested? creating a welcome.not file ?

thesire said:
http://www.codefactory.es/downloads/mobile_speak_pocket/Remote_ScreenAlignment_Manual.doc
see if this will help you.
Also to disable calibration you should create a file named "welcome.not" (without quotes) in the root directory of your storage card. This will skip the whole "welcome" process and may cause Extended_ROM programs not to be installed. (credit: mamaich)
Hope this helps.
Click to expand...
Click to collapse
yes i made a word file and named it welcome.not but i still need to go past the alignt screen

Did you install some screen protector ? If so, removed it and try again...

sectorlord said:
Did you install some screen protector ? If so, removed it and try again...
Click to expand...
Click to collapse
Do the screen protector have bad effect to HD?
Thanks

sometimes it has some stucking effect on the digitizer....especially when it's thick

sectorlord said:
Did you install some screen protector ? If so, removed it and try again...
Click to expand...
Click to collapse
yes i did. i removed it and cleaned the screen still same cant get past align screen

kwan80 said:
yes i made a word file and named it welcome.not but i still need to go past the alignt screen
Click to expand...
Click to collapse
well once you have this file in the root of your storage card you have to do hard reset and see if it will work or not ...

ok i got it past the screen align with program from this thread
http://forum.xda-developers.com/showthread.php?t=355010
could some one with hd downlad and retrive the alignment info and then post the file here

anyone please?

[Q] help!!! 614c

i have hp 614c and by a mistake i downloaded "HP iPAQ 600 Business Navigator Series - English ROM Update Using SD Card for Power Source Monitoring", and have tryed to install it. it was all fine, i started SD loader and the screen started to fade to black. i cannot turn on the phone or the SD loader or anything, exept charging it.
can anyone help me?

anybody. ..
i think his bootloader is dead .. and i was reading about that but i don know how to make JTAG??

did you look at this thread..?

keyx said:
did you look at this thread..?
Click to expand...
Click to collapse
yes i am. . but this metode is not working for me because i can't enter to bootloader (sdloader, download qualcomm, clean boot...)

yoske said:
yes i am. . but this metode is not working for me because i can't enter to bootloader (sdloader, download qualcomm, clean boot...)
Click to expand...
Click to collapse
try this: take-off battery, on 2GB (or lower) SD card put FLASH.dio file (i´m personally using keyx´s 18.2 version), put the card into phone, put battery into the phone, press "mute" and "record" button, hold them, press and release "power" button, release "mute" and "record" button and wait for SDloader start. SDloader should start normally and flash your phone.

blabol said:
try this: take-off battery, on 2GB (or lower) SD card put FLASH.dio file (i´m personally using keyx´s 18.2 version), put the card into phone, put battery into the phone, press "mute" and "record" button, hold them, press and release "power" button, release "mute" and "record" button and wait for SDloader start. SDloader should start normally and flash your phone.
Click to expand...
Click to collapse
and there is a problem .. i can't get to sdloader because my bootloader (bootloader is all combination of keys etc sdloader, download qualcomm...) is screw up. . and that mean i cant start sd loader, cant start download qualcomm and cant start anything.. only when i put ipaq on charger he show orange LED. . and thats is all.. i was reading about the same problem on HTC Atom, he solved on the way that he is done a JTAG..

if u sr your device do u see blue hp screen?
anyway ,take out your microsd out then check if u can see the blue screen when u sr your device
do u use orig battery? can u get one more battery 2 see if your battery is faulty

EREZYAD said:
if u sr your device do u see blue hp screen?
anyway ,take out your microsd out then check if u can see the blue screen when u sr your device
do u use orig battery? can u get one more battery 2 see if your battery is faulty
Click to expand...
Click to collapse
yes i'm sure that doesn't show a blue hp screen, and i take off micro sd from device and same problem, i use original battery but i must say that i was upgrading a bios from another phone (my biggest mistake, i am a stupid guy who dont read before use ) and everything is start ok but on half progress my screen goes to black. . and from that i can only charge my phone and he shows a orange LED but i cant start him. . .cant start anything..

you would need to do warranty exchange or replace the motherboard...i have no idea where you can do JTAG since no one did it before

keyx said:
you would need to do warranty exchange or replace the motherboard...i have no idea where you can do JTAG since no one did it before
Click to expand...
Click to collapse
i know but there is JTAG ( http://www.gert-menke.de/jtag-howto/ ) the problem is that i don't know where are testpoints (TDI, TMS..) i need service manual. . does somebody have them?

yoske said:
i have hp 614c and by a mistake i downloaded "HP iPAQ 600 Business Navigator Series - English ROM Update Using SD Card for Power Source Monitoring", and have tryed to install it. it was all fine, i started SD loader and the screen started to fade to black. i cannot turn on the phone or the SD loader or anything, exept charging it.
can anyone help me?
Click to expand...
Click to collapse
Hi,
That update is indeed for your phone... 600/612/614 are all the same phones, so ... I guess you have a problem with your battery and the contacts in your phone. Better check with HP.
Dirk

dirlan2001 said:
Hi,
That update is indeed for your phone... 600/612/614 are all the same phones, so ... I guess you have a problem with your battery and the contacts in your phone. Better check with HP.
Dirk
Click to expand...
Click to collapse
yes they are the same phones, but they havn't same ''product ID'' in my case FB136AA#ABB and i use this http://h20000.www2.hp.com/bizsuppor...swLang=13&mode=2&taskId=135&swItem=hh-59337-1
HP service in this case excange the all mainboard and put a new one who cost 200€, and that was a really expansive. but real problem is flash memory on the mainboard, in process that i done flash memory is flashed with a wrong BIOS, and it has a 2 options how to do it back:
1. excange a flash memory (but in this case replace all mainboard)
2. jtag: (they re-programing flash and make a new bootloader, and after that i can again flash a roms.)
see this http://wiki.xda-developers.com/index.php?pagename=DeadBoot
p.s. can anybody know where i make a new thread. . where is the technical part on this forum ???

Anyone interesting??
Now I have a JTAG cable, but still can't find service manuals, so i think the mainboard are similar with another HTC devices ..
If you need a photo of it,I'll take a photo..

after few months i came again . one question . .is there solution for 614c who haven't bootloader, in last post i wrote that i made jtag cable. . after that i cant go on because dont have service manual . does anybody have service book?

I'm trying to find a solution
while connected to your phone and set up a jtag
prepared eboot.bin
need to learn from eboot.bin
address at which he wrote in RAM
and run
but so far I do not know the address

I have the same problem about bootloader and what can i do? please help

did anyone managed to find out the address for JTAG?
@ Licov_a can you post a picture from Russian forum in which the motherboard, because there are explained where the pins, and repair procedures.
http://pda2u.ru/topic1699s0.html?p=30792&#entry30792

Someone told me start address for jtag pls

vaxoo said:
Someone told me start address for jtag pls
Click to expand...
Click to collapse
licov_a told me that he awaits the address and will have it for 2 weeks, so please be patient as it will set the whole process that is rather

5c000000xldr
a0140000eboot

[Tutorial]Beginner Android setup

Hey, since there is many requests for how to setup the android on you'r HD2, i was thinking "why dont i make one?" So here it is.
PS!!! My english is not the greatest.
First download this radio if you dont have it (recomended): 2.10.50.08_2
And install it, boot up you'r HD2. A stable ROM is also recomended.
Second download one of the builds from: Here
Third: Clear you'r SD card (Only if you have a low mb sd card) You dont really have to, but if you do, u might get some smoother speed.
Four: Extract the build you downloaded to you'r desktop on you computer and Copy the files inside the folder you extracted to. ALL files. and past them into you SD card. (VIA USB) once done, unplug you'r usb cable. (If u choosed the froyo build, just put the whole android folder to the root of you'r card)
Five: Disable the auto backlight in the WM first before you start android, Select file explorer on you'r HD2 (or simular programs) And go into you'r SD card Run clrcad (for the sound, If nothing happends, dont worry, dont supposed to) and run Haret. Then after the build has booted, plug you'r USB cable in you'r HD2 again (Android drains battery atm).
Six: Enjoy!
Note: If you'r screen turns black, turn off auto backlight. If it's still black, change radio. AND!!! This dont kills you'r winmo.
I'm non genius but i made this to help you guys.
Please correct me if i am wrong.
Cheers!

Hi,
Thanks for the info but I have done all that without the radio update. I'm running a stock vodafone ROM. I manage to get the haret launched and all the code scrolling but then the screen just fades to black and doen't finish the boot up... Is it the lack of the radio update doing this?? I'm not very clued in on this stuff.
Cheers!

FreddernLFC said:
Third: Clear you'r SD card (i did, dont know if it's recomended)
Click to expand...
Click to collapse
No need to clear your SD card (I never did). It does make it easier to switch between builds, though, since you can just delete everything and copy over the next one you want to try.
chazzerchops said:
Is it the lack of the radio update doing this?? I'm not very clued in on this stuff.
Click to expand...
Click to collapse
Yes, most likely. What you're reporting sounds like what other people had before they installed a compatible radio.

Just want to add:
1. depends on the build, you have to extract the content to SD based on the instruction. (for example, the Froyo build you have to extract all files to a folder named "android" at the root of SD)
2. Must disable the auto backlight in the WM first, else you will some times get the "black screen". If you look carefully or under strong light, you'll still see things on screen, there is just no back light.
2. Run clrcad before Haret to get the sound working.

Cheers Meptik
I am looking to update the radio version... it that like doing the full ROM thing, in that it will re-set everything to factory default? Or is the radio update not as 'back to square one' on the phone as doing the ROM?

chazzerchops said:
Cheers Meptik
I am looking to update the radio version... it that like doing the full ROM thing, in that it will re-set everything to factory default? Or is the radio update not as 'back to square one' on the phone as doing the ROM?
Click to expand...
Click to collapse
Updating only the radio shouldn't reset your HD2 to factory default, unless perhaps if you flash it using a stock ROM Update Utility.
Use the radio that FreddernLFC links to from the first post; it includes a CustomRUU, which should flash the radio to your HD2 without restoring it to factory defaults.

Hmmm.. will have another look at it. Ran through the updater and 5mins into it it errored so had to go through the recover process. I'll try again later. Cheers

meptik said:
No need to clear your SD card (I never did). It does make it easier to switch between builds, though, since you can just delete everything and copy over the next one you want to try.
Click to expand...
Click to collapse
Mine didn't work with stuff on my 8Gb card so I copied the whole card to my PC, reformatted the card, copied over the Android stuff and it then worked. I the copied all the back up stuff back and Android stopped working (tty error).

green screen
what do i do if i get a green screen...i ran haret..now i see a green screen

psn1819 said:
what do i do if i get a green screen...i ran haret..now i see a green screen
Click to expand...
Click to collapse
Take out the battery and start up again, I've got many green screens, but after some tryes it went perfect

psn1819 said:
what do i do if i get a green screen...i ran haret..now i see a green screen
Click to expand...
Click to collapse
You try again. Common issue.

Hi Everyone, just wanted to add a few things. i would recommend you turn off sense from the device, then power off the device, once it powers on again go straight to your file explorer and run the process. you should notice the cursor at the bottom blink at a slower pace, if its in hyper mode the system will crash. it has been helping me, hopes this helps to all

what is this hyper mode what causes it i had to down gade my radio to 2.10.50.26 to get rid of the super fast un usableness of the 2.12.50.xx but i did like my 2.12.50.xx radio wish there was a way to make it work with that radio

FreddernLFC said:
...
Five: Disable the auto backlight in the WM first before you start android, Select file explorer on you'r HD2 (or simular programs) And go into you'r SD card Run clrcad (for the sound, If nothing happends, dont worry, dont supposed to) and run Haret. Then after the build has booted, plug you'r USB cable in you'r HD2 again (Android drains battery atm).
...
Click to expand...
Click to collapse
how fast android drains battery ?

sev15 said:
what is this hyper mode what causes it i had to down gade my radio to 2.10.50.26 to get rid of the super fast un usableness of the 2.12.50.xx but i did like my 2.12.50.xx radio wish there was a way to make it work with that radio
Click to expand...
Click to collapse
i assume u can carry on 2.12.50.xx ? dont need to downgrade .. as long as its a .50 radio it shld be fine and pretty new shld be alright .. am i right guys ?

i jus downloaded the desirrev4 build. so i just have to extract all files into the root storage card ? then run clrcad before haret and thats it ?
may i check , does this kills my existing wm rom ? how to switch back to my original wm ? i have read this is a kind of multi boot method . apologies for noob questions .. would appreciate if someone can advice. thanks !

pool7979 said:
i jus downloaded the desirrev4 build. so i just have to extract all files into the root storage card ? then run clrcad before haret and thats it ?
may i check , does this kills my existing wm rom ? how to switch back to my original wm ? i have read this is a kind of multi boot method . apologies for noob questions .. would appreciate if someone can advice. thanks !
Click to expand...
Click to collapse
winmo still remains there but sometimes you might need to hard reset
just switch off the phone in android or take out the battery and reboot, you are on win mo again.
good luck

How long does it spend? Because I am waiting for a long time.

thihaz said:
winmo still remains there but sometimes you might need to hard reset
just switch off the phone in android or take out the battery and reboot, you are on win mo again.
good luck
Click to expand...
Click to collapse
thanks man !!! cool .. i have just installed android .. but i choose the sense interface. i noticed our hard buttons are not suppose to work right ? and do we have to run clrd and haret everytime we wanna start android ?
on regards to installations of android software, they will be on storage card ?
for the bro above, my running of andoid was fast .. i think less than 5 mins .. after haret, i see many words scrolling .. very fast .. then the next moment , it loads into android and will ask u what interface u want .

vdesire v5 out

[Q] converting to android

hi friends
I am using htc p3400i since last year nowadays from somewhere i got the wing linux option to convert the same system to android but after some process i got the massage on the screen " TSLIB calibration utilities" " touch the crosshair on the screen" but after that i am not able to touch the cross hair so at the last stage i couln't get the proccess finished so if anyone have the solution than do guide me.
thanks in advance

Are you sure that you have installed wing-linux-0.4.2-gene.cab?

yep dear
i am installing the same if you have converted the same into android than plz let me know how is it working and guide me for the procedure
thanks in advance

pranavjoc said:
yep dear
i am installing the same if you have converted the same into android than plz let me know how is it working and guide me for the procedure
thanks in advance
Click to expand...
Click to collapse
first make sure that you have atleast 650MB free space on SD card.Then install wing-linux-XXX-rootfs.cab on SD Card.It will take sometime then install wing-linux-XXX-GENE.cab on SD Card.During installation dont get your backlight turned off bcoz sometimes i have seen that it corrupts installation.Now run Winglinux from start menu.There is run button and default.txt simply press run button and wait.Then it will ask to allocate disk space dont do anything and wait.wait.....Then angstrom screen will appear.again WAIT.And finally there is touch screen calibrate screen and LoL it is working.
I don't know that why you can't touch crosshair.
Any way try again.Good luck for it.But Android is still not usable on GENE:-(
There is no sound and sometimes no network.For more go to http://wing-linux.sourceforge.net/trac/wiki/HTCGene.Do it for your Fun.
Have a nice day.

Arian rom [sys 29020]

Hi guys
I just made a rom by using pajerm's kitchen
well, its included some useful applications and stuff like that
its fast and light, no bug found yet
BUT i still have some problem since its my first rom =P
1) its name is still Pajerm (SOLVED)
2) I dont know why but I cant change the manila theme ( or actually edit it ) (SOLVED)
3) I cant make it vibrate on call :O (SOLVED)
4) USB pop up doesnt work (SOLVED)
5) I cant make xTask work :/
I guess the priority is theme ! if anyone can help, will be highly appreciated
all your help is highly appreciated

hi
hi
what help do u need my friend?
i will be happy to help u as members helped me before

I still have problems with theme !
I dont know how to use a manila 2D theme in my rom

ok
2 and 4 solved
I ignored 5 so, just 1 and 3

arianesfahani said:
ok
2 and 4 solved
I ignored 5 so, just 1 and 3
Click to expand...
Click to collapse
how to solve usb pop? which version are you used?

mehulkarate said:
how to solve usb pop? which version are you used?
Click to expand...
Click to collapse
I just did whatever monfro told pajerm to do
btw i had no chance to test my rom !it has an error which it doesnt let me to work ! not even let me install another rom :|
its killing me -.-
the error is : [ERROR] Please check HTCLOG
whenever i try to install a new rom, my opal restart and connection between PC and Phone is lost :|
what can i do now ?

i need to remove my current rom on my opal, but it seems i cant
any idea?

try to update rom by sdcsrd (put opalimg.nbh in the root of your sdcard and boot your opal with volume down key pressed)

it went to a screen which has 4 color ( red blue green and white) and stopped there

arianesfahani said:
it went to a screen which has 4 color ( red blue green and white) and stopped there
Click to expand...
Click to collapse
format the sdcard to fat32, than rename your rom to opalimg.nbh and put it in your sdcard, now start your opal with volume-down key pressed

thanks, worked <3

i will upload the rom tonight or tomorrow