i have hp 614c and by a mistake i downloaded "HP iPAQ 600 Business Navigator Series - English ROM Update Using SD Card for Power Source Monitoring", and have tryed to install it. it was all fine, i started SD loader and the screen started to fade to black. i cannot turn on the phone or the SD loader or anything, exept charging it.
can anyone help me?
anybody. ..
i think his bootloader is dead .. and i was reading about that but i don know how to make JTAG??
did you look at this thread..?
keyx said:
did you look at this thread..?
Click to expand...
Click to collapse
yes i am. . but this metode is not working for me because i can't enter to bootloader (sdloader, download qualcomm, clean boot...)
yoske said:
yes i am. . but this metode is not working for me because i can't enter to bootloader (sdloader, download qualcomm, clean boot...)
Click to expand...
Click to collapse
try this: take-off battery, on 2GB (or lower) SD card put FLASH.dio file (i´m personally using keyx´s 18.2 version), put the card into phone, put battery into the phone, press "mute" and "record" button, hold them, press and release "power" button, release "mute" and "record" button and wait for SDloader start. SDloader should start normally and flash your phone.
blabol said:
try this: take-off battery, on 2GB (or lower) SD card put FLASH.dio file (i´m personally using keyx´s 18.2 version), put the card into phone, put battery into the phone, press "mute" and "record" button, hold them, press and release "power" button, release "mute" and "record" button and wait for SDloader start. SDloader should start normally and flash your phone.
Click to expand...
Click to collapse
and there is a problem .. i can't get to sdloader because my bootloader (bootloader is all combination of keys etc sdloader, download qualcomm...) is screw up. . and that mean i cant start sd loader, cant start download qualcomm and cant start anything.. only when i put ipaq on charger he show orange LED. . and thats is all.. i was reading about the same problem on HTC Atom, he solved on the way that he is done a JTAG..
if u sr your device do u see blue hp screen?
anyway ,take out your microsd out then check if u can see the blue screen when u sr your device
do u use orig battery? can u get one more battery 2 see if your battery is faulty
EREZYAD said:
if u sr your device do u see blue hp screen?
anyway ,take out your microsd out then check if u can see the blue screen when u sr your device
do u use orig battery? can u get one more battery 2 see if your battery is faulty
Click to expand...
Click to collapse
yes i'm sure that doesn't show a blue hp screen, and i take off micro sd from device and same problem, i use original battery but i must say that i was upgrading a bios from another phone (my biggest mistake, i am a stupid guy who dont read before use ) and everything is start ok but on half progress my screen goes to black. . and from that i can only charge my phone and he shows a orange LED but i cant start him. . .cant start anything..
you would need to do warranty exchange or replace the motherboard...i have no idea where you can do JTAG since no one did it before
keyx said:
you would need to do warranty exchange or replace the motherboard...i have no idea where you can do JTAG since no one did it before
Click to expand...
Click to collapse
i know but there is JTAG ( http://www.gert-menke.de/jtag-howto/ ) the problem is that i don't know where are testpoints (TDI, TMS..) i need service manual. . does somebody have them?
yoske said:
i have hp 614c and by a mistake i downloaded "HP iPAQ 600 Business Navigator Series - English ROM Update Using SD Card for Power Source Monitoring", and have tryed to install it. it was all fine, i started SD loader and the screen started to fade to black. i cannot turn on the phone or the SD loader or anything, exept charging it.
can anyone help me?
Click to expand...
Click to collapse
Hi,
That update is indeed for your phone... 600/612/614 are all the same phones, so ... I guess you have a problem with your battery and the contacts in your phone. Better check with HP.
Dirk
dirlan2001 said:
Hi,
That update is indeed for your phone... 600/612/614 are all the same phones, so ... I guess you have a problem with your battery and the contacts in your phone. Better check with HP.
Dirk
Click to expand...
Click to collapse
yes they are the same phones, but they havn't same ''product ID'' in my case FB136AA#ABB and i use this http://h20000.www2.hp.com/bizsuppor...swLang=13&mode=2&taskId=135&swItem=hh-59337-1
HP service in this case excange the all mainboard and put a new one who cost 200€, and that was a really expansive. but real problem is flash memory on the mainboard, in process that i done flash memory is flashed with a wrong BIOS, and it has a 2 options how to do it back:
1. excange a flash memory (but in this case replace all mainboard)
2. jtag: (they re-programing flash and make a new bootloader, and after that i can again flash a roms.)
see this http://wiki.xda-developers.com/index.php?pagename=DeadBoot
p.s. can anybody know where i make a new thread. . where is the technical part on this forum ???
Anyone interesting??
Now I have a JTAG cable, but still can't find service manuals, so i think the mainboard are similar with another HTC devices ..
If you need a photo of it,I'll take a photo..
after few months i came again . one question . .is there solution for 614c who haven't bootloader, in last post i wrote that i made jtag cable. . after that i cant go on because dont have service manual . does anybody have service book?
I'm trying to find a solution
while connected to your phone and set up a jtag
prepared eboot.bin
need to learn from eboot.bin
address at which he wrote in RAM
and run
but so far I do not know the address
I have the same problem about bootloader and what can i do? please help
did anyone managed to find out the address for JTAG?
@ Licov_a can you post a picture from Russian forum in which the motherboard, because there are explained where the pins, and repair procedures.
http://pda2u.ru/topic1699s0.html?p=30792&#entry30792
Someone told me start address for jtag pls
vaxoo said:
Someone told me start address for jtag pls
Click to expand...
Click to collapse
licov_a told me that he awaits the address and will have it for 2 weeks, so please be patient as it will set the whole process that is rather
5c000000xldr
a0140000eboot
Related
last week i upgrade my xda to the 2003 versie
now i wanne go back
I've I tryed to "update" to the new XDA-Def. 1.2 then Flashprog stops after a few seconds and the Active Sync 3.7 stops to run...
A reset can wake up my xda, but no new developers rom .
please can somebody explane help how to rol back to developers v1.2
help
thx decodertje
Flash it by using an SD Card. Use XDArit and write the SERom 1.2 onto your card and flash it with the Bootloader.
I am writing up some documents regarding this. I will post them later today.
i just do wat u sad
and now my xda = dead
when i put it in the cradle it says unknown usb device
only the light from batterie is orange for the rest nothing
please help xda developers
what way did you use to upgrade to 2003?
i put the file 2003 from jef summers on a sd card
hard reset en instalt it
its works fine, but i like the xda developers rom 1.1 very much
then i want to instal v1.2 and i put the exe file from jef summers on the sd card .then i hard reset en instalt the rom,wait then it says compleet cold reset now ,thats wat i did and now its dead
and you only put and .nb1 on the card?
and left the 'bootloader' checkbox unchecked?
bootloader i also put a x
i think that was wrong right?
what to do ??
Hi!
I did the same but not the bootloader... 8)
But I've also the Problem to go back and
the 1.1 / 1.2 ist only an EXE and i could not burn
it on an SD card, right?
Stefan
yes. it is somewhat of a wonder that your 2003 actually works.
to fix a corrupt bootloader when you still have a working 2003. you would have to write a program to flash from ce. ( and figure out how to do flashing )
if your xda does not boot at all, take a look at jtag. maybe you can find someone who also does pda memory upgrades to do this for you.
i think u not understand me because my englisch
last week i upgrade my xda to the 2003 versie
now i wanne go back
I've I tryed to "update" to the new XDA-Def. 1.2 then Flashprog stops after a few seconds and the Active Sync 3.7 stops to run...
A reset can wake up my xda, but no new developers rom .
please can somebody explane help how to rol back to developers v1.2
help
that was the first problem to go back to v2.1
then i did
Flash it by using an SD Card. Use XDArit and write the SERom 1.2 onto sd card and flasht it with the Bootloader
i wait till it was finish.
the xda say compleet , en cold reset u xda . thats what i did.
but the xda dont work anymore.
when i put it in the cradle only the battery led burn.
windows xp say unknown device and dont regonice my xda.
when i put the powerbutton and softreset i dont see wallaby bootloader anymore??
what to do now
help me please xda developers
I think I do understand you, and that
if your xda does not boot at all,
Click to expand...
Click to collapse
is your current problem, and
take a look at jtag. maybe you can find someone who also does pda memory upgrades to do this for you.
Click to expand...
Click to collapse
is your only option left.
@XDA developer Itsme
thx for the help
i am lucky
there is a compagny in maarssen in the netherlands, its only 50km from almere, they upgrade my xda to 64 mb :lol:
do u now how the xda runs whit 128mb????
next week i go there and i let u know how it end
decodertje from the netherlands bye
Decodertje I'm from the Netherlands also and I changed back from 2003 to SE 1.2. So if you give me a private message I think I can solve your problem. And you can speak in Dutch then.
I'll explain in english what I did:
- Extract 'Jeff's SE 1.2 EXE' to an folder. (don't run it!)
- Then burn the NK.nbf found in the folder to an SD card with a SD reader (or MMC card/reader like I did) and put it in the device.
- Hold the power button and press the RESET switch.
- It will go into the Wallaby bootloader and will see the ROM on the SD card. Press the action button (middle position of the 4-way button).
It will load the new ROM and when it is finished (about 5 min.) press the RESET switch. And it will boot with the BEST ROM ever!
Hope this helps.
IMPORTANT
I forget something:
Burn the nk.nbf to an SD card with XDArit, but ONLY the Windows CE, do NOT select the bootloader!!!!
Aurora13
u got pm
@XDA developer Itsme
i just phone to the compagny
they say it is no problem to upgrade to 64 mb
but i lost my bootloader
and whitout a bootloader i can not flash the rom. correckt me if i am wrong.
do u now a way to put back the bootloader in the rom???
is it possible flash the walliby in my rom??
decodertje
Can you boot into the bootloader? (Hold power button and press reset)
no i can not come in the bootloader anymore
Then I'm afraid I can't help you and you have a real problem. The only way is the jtag way (see aboce for a URL).
i think i go buy anather ppc
what is a good ppc at the moment simuler to the xda??????
only faster and better
and whit many assersoires
thx for reply's folks
My MDA was unable to get back to bootload after a unsuccessful ROM upgrading. Is it possible to replace the ROM (hardware) so that I can save my MDA?
I tried the Power on key and softreset to reset it but only return to a messive screen.
Pls help. Thanks
cris...
you dont need to replace the hardware rom!!
try runing the upgrade program again, it sometimes picks up where it left off. if that dont work, try the SD card method.
i'd go into more details, but all that info is here in these forums already.
if u still need help though, contact me, and i'll try to help you.
good luck
Dear Ntabikha,
Thanks v much!
However, I tried the upgrade program many times and the decktop just said the computer cannot recognise the device.
So, I think method 1 is not possible.
For method two, I will try to put the nk.nbf file into my SD card and put it in the device and see whether the MDA can pick up the ROM. Will let you know whether it is successful.
BTW, when the screen is on, it only appears some fuzzy horizontal lines and two small empty boxes, have you seen this before?
Chris
yes, i had the same fuzzy lines. i fixed That problem via the SD card method.
just remember that, you have to write the nbf file to SD card, not just copy it to SD card
dont laugh, i did that mistake at first
good luck
How can I "write" it to the card?
I thought I only copy the file to the card through a SD reader.
Well, I know now, use rom kitchen to cook the rom and use osimagetool to copy the nb1 file into a sd card.
All i need to do next is to insert into the MDA and press power button together with softreset key for several times until successful....
Dear ntabikha,
I am still unable to obtain the bootloading screen of my MDA after inserting the SD with nb1 file written by xdatool. I tried many times power button and soft reset simultaneously (more than 20times) and the screen are still full of messy lines and 2 big empty boxes.
Can you help please? What is the fix broken bootloader in the xdatool?
I really did search around the forum but still can't be able to get back the bootloader screen. Pls help.
Chris
ntabikha said:
yes, i had the same fuzzy lines. i fixed That problem via the SD card method.
just remember that, you have to write the nbf file to SD card, not just copy it to SD card
dont laugh, i did that mistake at first
good luck
Click to expand...
Click to collapse
I'm wondering if you could not see bootloading screen , how could you use SD card to restore OS and bootloader ?
No, there is no bootloading screen at all.
I took the MDA out to a repair shop and they said that is a hardware failure. And they don't have the stock to replace it.
But I don't believe that cause I was just downloading the OS. It shouldn't hurt the hardware that much.....
chris_khho said:
BTW, when the screen is on, it only appears some fuzzy horizontal lines and two small empty boxes, have you seen this before?
Chris
Click to expand...
Click to collapse
I fixed couple such phones "horizontal lines and two small empty boxes" due to failure upgrading (all flash ROM messed up).
You have to use hardware flash ROM writer to wire the flash ROM pin to write bootloader and CE directly to chip.
I can help you to fix the problem (I'm in Canada, my email is [email protected])
Hi, I have similar trouble. My boss upgrade his MDA TMO (Austria) to official TMO version of OS and now it coming only to splash screen. MDA doesn't sync through cradle, doesn't seems to be charged, and I cannot enter BOOT mode for flashing ROM from SD card.
Is there any chance to fix it by myself?
Thanx, Ivan
TO CGIGATE: If you have any solution, can you post it here? Or it is so dangerous for nonexpert people? :wink:
Ivan said:
Hi, I have similar trouble. My boss upgrade his MDA TMO (Austria) to official TMO version of OS and now it coming only to splash screen. MDA doesn't sync through cradle, doesn't seems to be charged, and I cannot enter BOOT mode for flashing ROM from SD card.
Is there any chance to fix it by myself?
Thanx, Ivan
TO CGIGATE: If you have any solution, can you post it here? Or it is so dangerous for nonexpert people? :wink:
Click to expand...
Click to collapse
If you don't have a working OS and a working bootloader, the only solution is hardware solution. You have to wire the flash chip directly to the flash ROM writer ...
yes, it is dangerous for nonexpert people
Thank you CGIGATE for quick answer. Anyway I wrote you an email, could you be so kind and send me informations how I can do that, or where I can find these steps?[/quote]
in two day ago i post i cannot flash rom to 2003 but only 2002 that ok..
i repair infared and flash again ....now that's work for all of rom that kitchen have.....But now I have big problem to repair radio upgrade fail .... Help me please
At first I read this ...http://forum.xda-developers.com/viewtopic.php?t=4123&highlight=rsu+upgrade+error already but still cannot fix it pass 1%...upgrade fail
I have two model of my friends to repair
In first case.... I don't know version of radio this model before but i think may be he try to upgrade in 4.21. ...i test wallaby and That show gsm error on bootloader screen V5.17 .... I reset it and that show 3.14 and no radio...and g...then i press volume key until that show today screen...but no have start menu
That show blue color on top of screen ...but have owner name calendar and contact .... I cannot go to start menu coz cannot align sceen i try in 4-5 times but same...
I decide to flash rom to xda.ser12 by patch wallaby.... Finish.. cold reset...
It show front page of loader in xda-developers and 3.17.03 no s ..g same
But i can go to aligne screen and go to today screen....... I try to find Rsugrade.lnk and ...this
monitor_ul_bs.m0
monitor_ul_bs.map
RSUpgrade.cp64
RSUPgrade.exe
But cannot find .........????
I sync with pc..... That show screen in active sync... But cannot find...
I copy this file from pc
monitor_ul_bs.m0
monitor_ul_bs.map
RSUpgrade.cp64
RSUPgrade.exe
To card reader because i cannot sync with pc
I put a card in xda and copy 4 files to /windows ..... And run ... Rsupgrade.exe
That show ..radio stack upgrade but cannot pass 1% it's show fail press ok to reset ...
I try to do in same at 5 time and results is Same..... How can i do ... I don't know the way to pass 1%.....
2. In another model my friend he told me...
His O2 is rom 4.00.11ENG and Radio is 4.16
He want to upgrade to 4.21 .....
but he didn't up radio by use Program B to upgrade ...
He remove sim card and fully charge of battery.... And copy 4 files of Pc to xda by active sync ....
monitor_ul_bs.m0
monitor_ul_bs.map
RSUpgrade.cp64
RSUPgrade.exe
And he put out of cradle .. And go to start-file explorer and press rsugrade.exe
That make it go to radio stack upgrade screen.... 1%...5%....10%....and stop at half and hours.... He press softreset...and that show screen of ..test only not for sale..
4.00.11 but no have radio ...e press volume key to go today screen.... That ok. Not same as in one case that i wrote... He delete..
monitor_ul_bs.m0
monitor_ul_bs.map
RSUpgrade.cp64
RSUPgrade.exe
From O2 and reset..... Wait to go today screen..... And sync with Pc... Pass can sync with Pc... He copy 4 files from pc to xda by active sync... Put it of and ran...rsugrade.exe same...that i wrote cannot pass 1% same show upgrade fail press ok to reset and he try to do like this in 4 times but same result.....
I read this..... From this forum
lbazil wrote
Date: Thu Dec 11, 2003 03:32
I only have two things to add:
1. RSUpgrade _fails_ much more often without SIM card inside the phone;
2. Your battery should be fully charged (100%) before you start the upgrade, since if it does fail, the battery will stop charging, and the next time you attempt to upgrade, you may not be able to get past 1%, even if you have power adapter plugged in. If you happen to have another XDA, you could swap batteries, or use an extended battery, if you have one.
Good luck...
And MrDollyMaker wrote
I never do the RSUpgrade with a SIM in my phone.... Never failed unless I tried to do it with the EXE thing. But I do agree to make sure you have a full battery, but since it already is at the 1% error, you can charge it with the charger if you do not do anything when the error comes up. just let it sit and charge.
This mean i must charge battery in another and wait until show green led light in another O2 and swap battery to dead xda.... And ran rsupgrade.exe this way is make me pass 1% ????? Or not... I have no idea to repair it... Please somebody advice me to repair...
This is my trouble
1. Xda in first case can go to today screen and use pda.. But cannot sync with pc coz it's show cannot find .... And after try to another rom in 2002 or 2003...it hank and show blue color on top of screen ...but have owner name calendar and contact .... I cannot go to start menu coz cannot align screen ...but in xda-developers ser12 that mae me go to today screen and use file explorer
2.xda in second case can go to today screen,sync with pc,copy 4 files to xda by active sync but cannot pass ...1% i didn't flash os rom to another coz 4.00.11 can pass to today screen...
Please someone guide me to fix 2 dead xda for my best friends in my life.... I beg u..
Sorry to long story and very bad english...
And i hope for help ..... Best regard...
anybody ???????
any idea ? help me please
It looks like you have tried just about everything, rs 4.21 was the baddest of the bad when it was released, the tales of woe are endless where that radio stack is concerned. There is a person on this forum that can fix your xda but he lives in Canada and it may not be worth the trouble. I think his nickname is cgigate.
ok i will email to him or change mainboard
thx u for share idea i will email to him or decide to change mail board.... in my country a price of mailboard is ......1,150 us dollars.... that's expensive ? ........ last way i can do...
Re: ok i will email to him or change mainboard
[email protected] said:
thx u for share idea i will email to him or decide to change mail board.... in my country a price of mailboard is ......1,150 us dollars.... that's expensive ? ........ last way i can do...
Click to expand...
Click to collapse
Contact your dealer for the nearest repair centre. They will replace your radio with a new one using a special SD-card. This will work regardless of your current radio.
thx for reply me
but repsir center in my country is say only word... can't fix it u must change mainboard.... Dumb center........
now i can sync with pc
last try to flash rom in first case to 4.01.16 original roby t mobile....until finish i can go to today screen and align screen......and..can...sync dead xda in 1 case with pc...and copy 4 files to xda....run rsupgrade.exe...bad luck cannot pass 1% same in all lastest radio all of version
( asia,at&t,t-mobile)and when i flash back to another rom like a xda-developre ser 1.2 that cannot show align screen.... but jump to today screen without align screen ?.....and cannot sync to pc ...
i have 2 rom to bring me in today screen ...and use file explorer another rom except this make me hank on boot screen..//
1.xda-dev ser 1.2 cannot sycn
2.4.01.16 can sync but cannot pass 1% to upgrade
may be tomorrow i will trow it in a bin ....... thx for any reply
You need to replace the radio stack using a special SD-card, and your dealer (or a repair shop) should definitely be able to do this for you. This is the normal way for the service guys to do an upgrade, they won't rely on the USB sync to work.
I had the same thing happening to a friend of mine, and we got his device updated for free.
thx for reply
thx bamse ..... for reply but i think people in xda-dev.. so clever more than my repair center : (
hello all,
After spending some night to test on the xda1. I found that if your radio stack error, you can never get the radio stack fix in any way. So, don't try it because i waste your time. We can only fix it when we have the sc card radio stack fix by using the bootloader. (there is no way to fix it in window)
SX56 GSM ERROR YOU CAN FIX IT
In Some cases, you can fix this yourself, read this thread (last line of this post links to it), and try my solution, or PM me and I will make arrangements to fix it for you.
Too many people are getting this error, SIEMENS only wants your money, everyone is looking for an answer. It took some time, but I fixed mine, and I'll help anyone who needs it do the same for their SX56.
http://forum.xda-developers.com/viewtopic.php?t=10702
only sd update can help
Yes I totally agree that only SD update can help
but to do it we need at least some serial cable to xda
Where to find it or meyby anyone can post some schema of it
rgds
Lukasz
Yes. we need a man to help us how tho backup a radio stack in the sd card so we can load it in the bootloading mode. Please help us out!!!!
hoanghon said:
Yes. we need a man to help us how tho backup a radio stack in the sd card so we can load it in the bootloading mode. Please help us out!!!!
Click to expand...
Click to collapse
who can help??!!!! I have the same problem!
Can somebody make a ROM GSM on SD card?
(mods i would appreciate if you could make this a sticky for people... ive worked long and hard trying to get this thing working again)
Ok so heres what happened to my XDA which proberly happened to yours.
I went onto the 02 site and got the latest radio stack upgrade for my xda, but i didnt have the sim in my device so once it finshed and restarted the xda it crashed because there was no sim in it. So i hard reset it.
Causing it to hang on the boot screen showing the G & U letters on the side for about 4 minutes before booting to a blank screen with the keyboard icon in the corner.
*** Please remember at the moment my status LED isnt working showing there is no battery (but still booting etc - P.S i have installed a new battery - no diffrence) ***
Heres how to get it working...... remember that everything takes longer because the XDA lags like mad.
Ive created this guide myself ive took nothing from anyone else info ive done this from scratch, it will need to be done everytime the machine runs out of power (hard resets).
---------------------------------------------------------------------------------
* when i put " + " it means AT THE SAME TIME e.g button1 + button2 = keep pressing them at the same time.
** I refer to the directional keypad centre button as the "OK" button.
Make sure you have the correct RSU Version from here :>
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_GSMError
Download it and put the files onto an SD card.
1. Boot up the device
2. keep pressing the OK button + volume button until it shows the today screen, please note there will be no titles on the screens, HENCE NO START BUTTON.
3. Then press the contacts button + THEN OK a few times, then press the OK button this should bring up the start menu
4. CLICK programs, file explorer, select the SD Card. Then Copy RSUPGRAD.exe to : my device > windows>start up.
5. Copy the remaining 3 files to the : my device > windows
6. Soft Reset Device
7. Click on start (on the upgrade util) it will then restart the device because theres no LED for the battery (hence the 1% then fail).
8. Once started it should then start up as it did when it came out the box giving you the windows setup screen.
9. Go into file explorer and delete tha flas util file from the startup.
Thats it!
- Remember if you hard re-set the device again it will need to be re-done, i dont know how to solve this problem LONG TERM, im giving my XDA to 02 to fix it...... been as its there screw up.
----------------------------------------------------------------------
Thanks Everyone
James
Does this actually flash the gsm radio? If it does then why does it need reflashing following a hard reset?
No it doesnt re-flash it.............
All i know is that it fixes it and many people have had the same problem but had no replys so id thought id help them out :roll:
Where are he diffreneces to the instrucions on wiki????
Stefan
huh? so your saying someone has already written the instructions?
Do you have a link? it will be intresting to find out how i can get my LED working again so the system will be able to work once more.
EDIT: IF THE BATTERY LED/STATUS IS UNKOWN (as in my case)
"Maybe the upgrade will stop again at 1%, this may occur when you have an empty battery. "
Does not apply to you............... hence why my guide overcomes the one on wiki.
If you have had the situation happen to you, then you would undertsand.
would it be possible to use the xda developers 1.2 special edition ROM instead of the 1.1 version for this procedure?thats the only rom i seem to have found.
Boogie, I think you need only the radio stack not the rom if I read the post correctly. The special edition rom contains NO RADIO STACK.
That´s not 100% correct. I´ve noticed, that some ROMs wouldn´t boot up so that you can follow the procedure.....
Stefan
hey guys this is my 1st post to this forum, but for the last year or so I've found it very helpful.
I was experiencing this same issue it would just boot up and hang on the welcome screen for what seemed like an eternity. I gave up and just left it booting up and finally the today screen came up. This is what I tried and it worked. All of this was after a hard reset when I tried to upgrade the radio stack and it fell into this infinite loop of 1% and fail and reboot. I had read a couple of the procedures for doing a radio stack upgrade but here is some of what I did.
In one of the procedures it says to copy the files to ur ppc windows directory and to copy the exe file to ur windows startup directory. I figured I would bypass that in some way. After I finally got to the today screen and used my pc to copy the files to the sd card, I copied all the files to the windows directory on the device and ran the exe file from the windows directory. It worked like a charm and my ppc was back to life. It no longer took for ever to get passed the welcome screen. I hope this helps some of you that have this issue
Hi to everybody.
I would want to set you a very strange problem that has happened to one friend of mine. He has installed the original ROM wm5 and he wants to pass to wm6, once connected the pda to the computer activesync unfortunately it tries to syncronize him but remains to syncronize to the endless (1° strangeness) one.
Later starting the official updating htc downloaded by the site, continuing with the instructions and reaching the prophetic moment in which the pda is disconnected by activesync and puts on in formality bootloader to adjourn from the prophetic error 260 that I have documented and I bring here you him:
Me being a little hacker and almost all knowing the methods to upgrade the ROM I have recommended him to try to put in formality bootloader to extract the content of the original file and to make to depart the file ROMUpdateUtility, but also them error 260. Not giving me for defeated I have tried the last method from me known, the updating from micro sd card.I have dictated him footstep footstep what had to do but not even this time of it to wanted to know to adjourn him (2° strangeness, doesn't know however if has correctly done all finding himself him in the Marche and me in Sicily ). I think that can treat more specifically him of the pc of the operating system, even if he has told me that it has the xp.
Now I put me in your hands, aspect suggestions on as to resolve.
I thank you in advance
And excuse me for mine bad bad..... English
To get your P3300 back to live
Don't worry if things goes wrong sometimes.
1.What you can do is maybe a good option if you have a P3300 without a
provider then you can better going
to the website of Htc register yourself (its free!) Then register
your model of your Htc Product.
Go to the Htc club. you will find your originale udate rom!!! This is also
to find it here.
2. There is a nother option.
copy your RUU_singned img to a sd card and put the sd card bac to
your P3300.
Start the bootloader by pressing the both key rec. and power
and hold em when your do a reset.
You will see a 3 color line on your screen then you will see
the install progres from your img.
wait and follow the instruction on that display.
I had also a problem a month ago but and this option by the sd card
did working fine for me.
Now I update the software and also the dial pad to vista look. That is
realy awesome!
It's working fine and do its job what this model has to do!
Succes and good luck!
PLEASE I need help! I have an htc p3300 and when I try to update it goes up to 3% and turns off. There isn't any rom that I haven't tried but noone worked . Is there anything I can do ? Thanks in advance
...
takes sd card out..
you done uspl.. if not.. click it in my signature..