Related
Hello there,
I have a MDA from T-Mobile germany PW10A2 with an RUU version which was probably 3-13-12-GER and a RSU which was probably T360.
I dowloaded 2 update files on the site of T-mobile germany:
http://www.t-mobile.de/shop/handy/1,4855,2963-_50-0-99,00.html
- t_mobile_mda_ppc_update_v3_19_03.exe
- t_mobile_mda_gsm_gprs_update_v3_23.exe
Since I wrotte them an Email, no answer, and the page has been cancelled.
What have I done:
- I installed the PPC 3.19.03 through Activesync: no problem
- I then installed the GSM GPRS update: once it started updating on my MDA at 10% it kept stucked. After 20 mn I decided to interrupt.
Since that day I have the white screen with the litle keyboard down right and that's about it.
My boot loader is V5.15. when it runs it displays "WAIT", and then "GSM ERROR"
As suggested in this Forum, I bought an SD Card, and a card reader writter, I wrote the RUU file NK.nbf contained in the downloaded .exe file from T-mobile. I flashed my room (proposed when I cold reseted the Wallaby) and then : NOTHING HAS CHANGED !!!
I tried again with a cooked Rom flashing a NK.nb1 file and... I got the ROMKitchen splash screen and... nothig else.
The display stays all white, you can read "this ROM was cooked in the ROM Kitchen" all on top af the screen and in the lower right side I still have the keyboard Icon.
Now I'm really worried !
Does any one have a suggestion ?...I believe my problem is realy serious.
Pascal
Hate to tell u that mate, but if your device can't be recognized by ActiveSync, then the only action is to get the device to be repaired by a specialized center or replaced.
However, check this topic carefully .. it might help
http://forum.xda-developers.com/viewtopic.php?t=4123
Good luck
Good news bad news
I have an SX56 with att, I had the same problem. rsupgrade failing at 1%, hard reset, and then the device white screned. First, downgrade the rom. Find the old update program, open it with winzip (or winrar) and you should be able to extract the rom image. get http://wiki.xda-developers.com/wiki/XDAtools place the rom on an sd, softboot while holding down the power button. the device will now offer you the option to load the rom from the sd, do so. once this is done the device should display the old roms ID. If this works, format the SD card, create a directory 2577 copy the program RSUpgrade and associated files, rename it as autoexec insert the card in the phone, and you should be able to reflash the RSU, if this fails.... time to break out the jtag header or be ready to send the unit in
My MDA is dead and buried
Thanks to both of you guys, for your concern.
I had actualy already tried your proposed solutions (I had found in this forum except yours rszasz).
My MDA is less than 2 years old and I took it to a T-mobile shop in germany (during a business trip). They're proposing either to repair it, or to replace it (The guarantee is still runing).
After having flashed a cooked a rom in the kitchen, I still had the same problem, so in the perspective to bring it back to a T-mobile store, I reflashed the faulty file I had downloaded on the T-mobile Web site.
I hoppe they won't find out and make any trouble.
I like this MDA so much, I don't remember how it was without it !
All the best
Pascal
Re: My MDA is dead and buried
Pewinski said:
Thanks to both of you guys, for your concern.
I had actualy already tried your proposed solutions (I had found in this forum except yours rszasz).
My MDA is less than 2 years old and I took it to a T-mobile shop in germany (during a business trip). They're proposing either to repair it, or to replace it (The guarantee is still runing).
Pascal
Click to expand...
Click to collapse
send the phone to me, I could repair for you!
Thank's but it's under guarantee and I get it repaired or a new one for nothing.
Best regards
in two day ago i post i cannot flash rom to 2003 but only 2002 that ok..
i repair infared and flash again ....now that's work for all of rom that kitchen have.....But now I have big problem to repair radio upgrade fail .... Help me please
At first I read this ...http://forum.xda-developers.com/viewtopic.php?t=4123&highlight=rsu+upgrade+error already but still cannot fix it pass 1%...upgrade fail
I have two model of my friends to repair
In first case.... I don't know version of radio this model before but i think may be he try to upgrade in 4.21. ...i test wallaby and That show gsm error on bootloader screen V5.17 .... I reset it and that show 3.14 and no radio...and g...then i press volume key until that show today screen...but no have start menu
That show blue color on top of screen ...but have owner name calendar and contact .... I cannot go to start menu coz cannot align sceen i try in 4-5 times but same...
I decide to flash rom to xda.ser12 by patch wallaby.... Finish.. cold reset...
It show front page of loader in xda-developers and 3.17.03 no s ..g same
But i can go to aligne screen and go to today screen....... I try to find Rsugrade.lnk and ...this
monitor_ul_bs.m0
monitor_ul_bs.map
RSUpgrade.cp64
RSUPgrade.exe
But cannot find .........????
I sync with pc..... That show screen in active sync... But cannot find...
I copy this file from pc
monitor_ul_bs.m0
monitor_ul_bs.map
RSUpgrade.cp64
RSUPgrade.exe
To card reader because i cannot sync with pc
I put a card in xda and copy 4 files to /windows ..... And run ... Rsupgrade.exe
That show ..radio stack upgrade but cannot pass 1% it's show fail press ok to reset ...
I try to do in same at 5 time and results is Same..... How can i do ... I don't know the way to pass 1%.....
2. In another model my friend he told me...
His O2 is rom 4.00.11ENG and Radio is 4.16
He want to upgrade to 4.21 .....
but he didn't up radio by use Program B to upgrade ...
He remove sim card and fully charge of battery.... And copy 4 files of Pc to xda by active sync ....
monitor_ul_bs.m0
monitor_ul_bs.map
RSUpgrade.cp64
RSUPgrade.exe
And he put out of cradle .. And go to start-file explorer and press rsugrade.exe
That make it go to radio stack upgrade screen.... 1%...5%....10%....and stop at half and hours.... He press softreset...and that show screen of ..test only not for sale..
4.00.11 but no have radio ...e press volume key to go today screen.... That ok. Not same as in one case that i wrote... He delete..
monitor_ul_bs.m0
monitor_ul_bs.map
RSUpgrade.cp64
RSUPgrade.exe
From O2 and reset..... Wait to go today screen..... And sync with Pc... Pass can sync with Pc... He copy 4 files from pc to xda by active sync... Put it of and ran...rsugrade.exe same...that i wrote cannot pass 1% same show upgrade fail press ok to reset and he try to do like this in 4 times but same result.....
I read this..... From this forum
lbazil wrote
Date: Thu Dec 11, 2003 03:32
I only have two things to add:
1. RSUpgrade _fails_ much more often without SIM card inside the phone;
2. Your battery should be fully charged (100%) before you start the upgrade, since if it does fail, the battery will stop charging, and the next time you attempt to upgrade, you may not be able to get past 1%, even if you have power adapter plugged in. If you happen to have another XDA, you could swap batteries, or use an extended battery, if you have one.
Good luck...
And MrDollyMaker wrote
I never do the RSUpgrade with a SIM in my phone.... Never failed unless I tried to do it with the EXE thing. But I do agree to make sure you have a full battery, but since it already is at the 1% error, you can charge it with the charger if you do not do anything when the error comes up. just let it sit and charge.
This mean i must charge battery in another and wait until show green led light in another O2 and swap battery to dead xda.... And ran rsupgrade.exe this way is make me pass 1% ????? Or not... I have no idea to repair it... Please somebody advice me to repair...
This is my trouble
1. Xda in first case can go to today screen and use pda.. But cannot sync with pc coz it's show cannot find .... And after try to another rom in 2002 or 2003...it hank and show blue color on top of screen ...but have owner name calendar and contact .... I cannot go to start menu coz cannot align screen ...but in xda-developers ser12 that mae me go to today screen and use file explorer
2.xda in second case can go to today screen,sync with pc,copy 4 files to xda by active sync but cannot pass ...1% i didn't flash os rom to another coz 4.00.11 can pass to today screen...
Please someone guide me to fix 2 dead xda for my best friends in my life.... I beg u..
Sorry to long story and very bad english...
And i hope for help ..... Best regard...
anybody ???????
any idea ? help me please
It looks like you have tried just about everything, rs 4.21 was the baddest of the bad when it was released, the tales of woe are endless where that radio stack is concerned. There is a person on this forum that can fix your xda but he lives in Canada and it may not be worth the trouble. I think his nickname is cgigate.
ok i will email to him or change mainboard
thx u for share idea i will email to him or decide to change mail board.... in my country a price of mailboard is ......1,150 us dollars.... that's expensive ? ........ last way i can do...
Re: ok i will email to him or change mainboard
[email protected] said:
thx u for share idea i will email to him or decide to change mail board.... in my country a price of mailboard is ......1,150 us dollars.... that's expensive ? ........ last way i can do...
Click to expand...
Click to collapse
Contact your dealer for the nearest repair centre. They will replace your radio with a new one using a special SD-card. This will work regardless of your current radio.
thx for reply me
but repsir center in my country is say only word... can't fix it u must change mainboard.... Dumb center........
now i can sync with pc
last try to flash rom in first case to 4.01.16 original roby t mobile....until finish i can go to today screen and align screen......and..can...sync dead xda in 1 case with pc...and copy 4 files to xda....run rsupgrade.exe...bad luck cannot pass 1% same in all lastest radio all of version
( asia,at&t,t-mobile)and when i flash back to another rom like a xda-developre ser 1.2 that cannot show align screen.... but jump to today screen without align screen ?.....and cannot sync to pc ...
i have 2 rom to bring me in today screen ...and use file explorer another rom except this make me hank on boot screen..//
1.xda-dev ser 1.2 cannot sycn
2.4.01.16 can sync but cannot pass 1% to upgrade
may be tomorrow i will trow it in a bin ....... thx for any reply
You need to replace the radio stack using a special SD-card, and your dealer (or a repair shop) should definitely be able to do this for you. This is the normal way for the service guys to do an upgrade, they won't rely on the USB sync to work.
I had the same thing happening to a friend of mine, and we got his device updated for free.
thx for reply
thx bamse ..... for reply but i think people in xda-dev.. so clever more than my repair center : (
hello all,
After spending some night to test on the xda1. I found that if your radio stack error, you can never get the radio stack fix in any way. So, don't try it because i waste your time. We can only fix it when we have the sc card radio stack fix by using the bootloader. (there is no way to fix it in window)
SX56 GSM ERROR YOU CAN FIX IT
In Some cases, you can fix this yourself, read this thread (last line of this post links to it), and try my solution, or PM me and I will make arrangements to fix it for you.
Too many people are getting this error, SIEMENS only wants your money, everyone is looking for an answer. It took some time, but I fixed mine, and I'll help anyone who needs it do the same for their SX56.
http://forum.xda-developers.com/viewtopic.php?t=10702
only sd update can help
Yes I totally agree that only SD update can help
but to do it we need at least some serial cable to xda
Where to find it or meyby anyone can post some schema of it
rgds
Lukasz
Yes. we need a man to help us how tho backup a radio stack in the sd card so we can load it in the bootloading mode. Please help us out!!!!
hoanghon said:
Yes. we need a man to help us how tho backup a radio stack in the sd card so we can load it in the bootloading mode. Please help us out!!!!
Click to expand...
Click to collapse
who can help??!!!! I have the same problem!
Can somebody make a ROM GSM on SD card?
Hi,
I have been donated an Orange SPV m5000 to help with my disseration,
unfortunatly the rom as been tampered with or removed , well im lead to
believe. Due to this the phone no longer turns on, the only thing the handset will do is get to the bootloader screen.. after resetting the factory settings the handset still does not turn on. i think the handset therefore has no ROM files on it as I have tried to update using downloaded roms such as
Orange_SPV_M5000_v1.13.49_WWE
JASJAR_WWE_11353_137_10301
both say that they cannot communicate properly with the device...
using MaUpgradeUt_noID and following instruction posted the handset starts to update but then says that the updater is not compatable with the handset... any suggestions on how to load a new rom onto the handset would be greatly apprecieted or infact how to to fix this problem with limited technological knowlegde
thanks
cjh28
I'LL GIVE YOU 50 QUID FOR IT!!!!!!!!!!!!!
****, not even I'd be that cruel.
First off I'm 75% sure your device is fine.
ROM chips are nigh on impossible to remove without breaking the device and doubly nigh-on impossible to put back in! No one in their right mind would even concider doing such a rash thing, espcially with something that costs this much!
Now I think the problem is the same as the one I had - these ROM upgrades can contain many separate updates which are then kind of glued together - the problem is (and the problem you may have) is that they don't all match what is already in your PDA.
You therefore have to do one of 2 things:
1) Find an upgrade that DOES match - but then you'd have to know what's already in there & then find a match - unlikely.
2) Make them match with a bit of jiggery pokery. read THIS:
http://forum.xda-developers.com/viewtopic.php?t=40986
Seriously dude, good luck!
Andy
Still Dead well almost
Thanks for pointing me in the right direction, Ive been thru the directions on the link provided and still having no luck, am still getting a communications error - 101 from the update ... am thinkin ive got the incorrect orginal roms ... does any1 know where i can find the orginal roms for a UK Orange SPV m5000 ( am currently using a rom that gives me operator name as Qtek and WWE - the name of the file is on my orginal post)
any further help/guidance would be greatly appreciated....
Many thanks
cjh28
Flash It Again
1. Download This:
http://www.business.orange.co.uk/se...c=PaDPage&cid=1044130840493&mid=1044129390154
2. Make sure u are not using a USB Hub
3. Make sure u are using the proper USB Lead!!!
4. Install Active Sync 4.1 On your Computer (it needs the USB Driver Within this Program to communicate with your UNI.
5. If you have followed all the above correctly your SPV will flash
especially if it is going into bootloader mode.
If you get country error or comm error, hit update AGAIN, DO NOT Disconnect.
IF the upgrade wont go 100% thru, try upgrading the radio only by deleting all the .nbf files except the radio_.nbf then run MAUpgradeUt_NOID.exe
Up and Running finally .... thanks
Just to say that my SPV M5000 is now up and running.. thanks to Andy and comp.solutions for helping me out, just followed ur instructions took a few attempts but its all gd now
Many thanks
cjh28
Damn! Bang goes my 300 quid profit!
No, seriously dude, you don't know how much 'inner glow' that gives me to know that we have helped you recover what may have seemed a lost cause.
Well done! :wink:
Now you can spend the next month trying to figure out how to get things to work 'properly' on the bloody thing..... :lol: (i.e. guess what I've been trying to figure out for the last month: Bluetooth, WiFi, ActiveShyte, installing programs, discovering what a 'uni' is, what 'BT' is blah blah blah.... :roll: )
Andy
Fixed M5000
Glad to Help, Enjoy :wink:
All,
I've exchanged many emails with the imei.check.co.uk team and also met personally one of these guys in order to be able to upload a new ROM to my O2 Orbit. I had excatly the same problem as many of you with ending the uploding process with "model invalid id" error message.
Now I'm happy to say we do have a solution.
So if you want to change your ROM (any), simply follow these instructions:
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Of course you can publish the instructions...
BUT PLEASE put a BIG WARNING! It will crash the phone in case you don't have a valid key file to perfom the last step: RUN THE UNLOCKER AGAIN AFTER THE ROM MODEL SWITCH TO RECOVER FROM THE DATA CRASHED MESSAGE!
Hello,
we found a way to flash ANY artemis roms in ANY Artemis look alike device (HTC Hero too).
Tools you need:
-hexworkshop from http://www.bpsoft.com/downloads/
-Any rom
-winzip or winrar
-http://www.imei-check.co.uk/C3v1Unlock.zip
a valid UNL file for your phone.
install hexworkshop and winzip/winrar
Take any rom for example: ART_HTCWWE_11240501_026790_WWE_Ship.exe
in explorer, right click on it and select "Extract files..."
Now it will unpack all the files
You'll have now "HTCWWE_shipsigned.nbh"
right click on it and Click "Hex Edit with Hex Workshop"
You'll see on the 5th row ARTE10000
Make it ARTE***** and save file
Now right click on ROMUpdateUtility.exe and "Hex Edit with Hex Workshop"
Search for word password.it will find it at 0x3E0B0 after password replace "BsaD5SeoA" with "IMEICHECK" and save the .exe file
Now connect the phone to the pc (normal way). run the C3v1Unlock.exe
when is asking for UNL file, disconect the phone from pc, press cancel, and
close the unlocker.
Now connect the phone back to the pc (in this mode it is) and run the
ROMUpdateUtility.exe
Now follow the instructions as the upgrade it will work.
After upgrade done, run the unlocker again and this time select the correct UNLfile.
Task Done.
C3 after flashing with any WIFI roms it will STILL not have WIFI!!!
Regards,
IMEI-CHECK Team
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Cheers, Martin
YESS, I have changed my GER rom to new HTC official ENG Rom, you are the best!!!!!! It's very simple to do...
yuppyyyyyyyyyyyyyyyyyy
the next step is.... backup the ROM I'm search ITA ROM form my HTC 3300.
see you later...
Good Discovery,
But the key is: We will have to pay 38USD for the "Proper UNL file" which is unique for every IMEI. Is it right?
Yeah, Thanks mr. Martin who is from Imei-Check Team. But we are still looking for a free solution.
Regards!
Tamagochi,
yes, first you have to go to imei.check and pay for the unlocking program and the unique .unl file.
P.S. I'm not a member of imei.check, just had the same problem as many Orbit users here...you can find my previous thread.
Works great on all versions.
Great support from the boys from emeicheck
Question about directions
Okay, I'm gonna try this. Do I still follow these directions exactly even though I have already unlocked the CID?
Also, when you see the line "ARTE1000" do you actually replace the "1000" part with the little stars? Sorry, I'm really new at this!
Thanks!
Yes you must do it all.
HELP
Everything went smoothly but when the device rebooted, it want me to "align the screen". It doesn't seem to be able to detect the stylus touching the screen! Can't get past that screen! Anybody know what I could have done wrong?
REF: HELP (Never Mind...)
I DID IT, I DID IT, I DID IT!!!! Just had to wait a minute or two and then everything seemed to work fine!!! TomTom is there, my WiFi is working! Thank you MAROSV and FRANCOBANCO!!!! If I can do it, ANYBODY can!! THANK YOU!!!
Hi KleineMaus,
I am wondering which ROM u used on your orbit that includes tomtom?
Or do you just mean you still had tomtom stored on your menory card?
Cheers, Towelie.
towelie said:
Hi KleineMaus,
I am wondering which ROM u used on your orbit that includes tomtom?
Or do you just mean you still had tomtom stored on your menory card?
Cheers, Towelie.
Click to expand...
Click to collapse
hi, I've just used the last HTC offical Rom (see xda ftp site..) that include TomTOm + 1 city map
byebye
Hi, I used the ROM on the Wiki page Dopod|English|DOPOD001|ARTE1****|1.25.707.2 ??/??/0?|1.25.707.104|1.25.0000|02.69.90|4.1.13.30| [Download|ftp://xda:[email protected]/Artemis/Shipped_Complete_Updates/ARTE_DOPODAU_12570702_026990_WWE_SHIP.exe]|[Thread|http://forum.xda-developers.com/showthread.php?t=286639]
It worked like a charm. The only problem I had was that when the Orbit re-booted after the process finished, it didn't seem to detect the sylus. I just waited five minutes and then it worked. Guess it was still getting settled in with it's new ROM. I don't know where I had the TomTom before I started the update, but it installed the German maps which were there before but as a bonus it gave me a English speaking voice which I didn't have before. It came with a German voice and I couldn't change because I had not yet upgraded the memory and had no room. So, my update was super! The only little thing is that once I changed the screen color back to blue instead of that terrible green, I couldn't get the phone part (dialing pad) to change to blue. No biggie, as now I can use my Orbit in English. I can live with the green phone pad! Maybe somebody will tweak that one. Hope this wasn't more info than you needed....
KleinMouse,
the dialing pad can be easily changed as well....just do a little seach on this Artemis forum and you will find many links pointing to skins available for WM5 phone edition.
O2 Orbit ROM upgrade info
Hi,
my o2 orbit has ROM 1.25.206.2 WWE. I wanted to know if this is the latest ROM available for my phone. I got my phone 10 days ago and i gotta do a soft reset on it every day. I had the same kind of problems with o2 Atom. But most of the issues were corrected once the ROM was upgraded. Please someone update me on my situation. Thanks
I tried the steps but i'm always getting the ERROR[300] : INVALID UPDATE TOOL - This Update Utility cannot be used for your PDA Phone. Please get newer Update Utility
Anyone who can help me here? I already tried different ROMs but always the same message
Did you unlock with imei-check? What is your model ID ARTExxxx ?
Yes i did. My Model ID is ARTE100
Hmm, but the steps described above are necessary to follow only if your model is Orbit (ARTE200). If you have HTC P3300 or Dopod p800W or Artemis or MDA compact 3, then you don't need to do it this way. The only thing you need to do is to unlock with Imei-check. If it still doesnt work, contact their help desk.
Ok i see, very strange indeed. I did the unlock with the stuff from Imei-check but i still get the message ERROR [244] : INVALID MODEL ID . If i try the steps from your post #1 , i get the described error obove. I'll try to contact the guys from imei-check, i hope they can help me
Hi Kleine Maus, I read with great joy that you succeeded and I would like to feel the same way.... Could you kindly reply to me and give me some detailed instructions to follow? Hopefully this will work for my HTC P3300....Thanks in advance.... I really appreciate it. Best SiperX
I have an unbranded Chinese P800 from eBay and would like to upgrade it to WM 6.0. What I have onboard :
1. WM 5.0 OS 5.1.525 (Build 15364.3.4.4)
2. Processor ARM926T OMAP730
However, one perculiar thing is that I can't find any Device Info on IPL, SPL, Radio ROM etc. I've tried using WST 4.2.2 but to no avail. I'm using my Lenovo S10 Netbook running XP and ASync 4.5. What I've managed to do are :
1. Run USPL, it goes from 0.. to 60.. and hangs, I reset my P800, USPL resumes to 70..100 and the RUU program starts,
2. the screen on my P800 turns dark with the Linux Penguin and some message of mapping, preloader etc comes on temporarily before Windows comes on again,
3. RUU runs, upgrading to image 9.99 (original image is blank-no info), when UPDATE ROM IMAGE ON YOUR PDA PHONE comes on it never gets to more than 0% (no blue progress bar), my P800 screen goes dark, loses connection and I get ERROR(260).
I have done this several times and there is no way I can verify if the CID is unlocked as I can't get the SPL info anywhere. So I will appreciate any help I can get. Thanks in advance.
Hi Salimbs,
Have a look at these two posts:
* Regarding the CID unlock for Artemis
http://forum.xda-developers.com/showthread.php?t=334667
* Regarding the error 260
http://forum.xda-developers.com/showthread.php?t=293085&highlight=error+260
Hope this will solve your problem
mouse.co.nr said:
Hi Salimbs,
Have a look at these two posts:
* Regarding the CID unlock for Artemis
http://forum.xda-developers.com/showthread.php?t=334667
* Regarding the error 260
http://forum.xda-developers.com/showthread.php?t=293085&highlight=error+260
Hope this will solve your problem
Click to expand...
Click to collapse
Hi mouse.co.nr,
Many thanks for your reply and pointing to the right direction. I'll get to it asap and post the outcome (success I hope!)
Hi Salimbs,
just another note,
in the past I found myself in big trouble (not with Himalaya as it was SD flashed) but with Charmer and Magician ROM updates, also with ROMs that I have already used in the past and classified as stable,
Roms used to get blocked during upgrade leaving me in Boot mode if I don't remember bad..
I have noticed that this error was common when Ms. Office applications like for sxample Word or Excel was turned on!
it makes like a kind of disturb to the rom!
once closed (all office and not necessary applications) roms updates smooth and bug free!
Don't remember if it was an Err 260 or not, I just remember that update blocked at a certain point...
try to do your upgrades with office turned off!
wish it will help to solve your problem
X-Mouse
mouse.co.nr said:
Hi Salimbs,
just another note,
in the past I found myself in big trouble (not with Himalaya as it was SD flashed) but with Charmer and Magician ROM updates, also with ROMs that I have already used in the past and classified as stable,
Roms used to get blocked during upgrade leaving me in Boot mode if I don't remember bad..
I have noticed that this error was common when Ms. Office applications like for sxample Word or Excel was turned on!
it makes like a kind of disturb to the rom!
once closed (all office and not necessary applications) roms updates smooth and bug free!
Don't remember if it was an Err 260 or not, I just remember that update blocked at a certain point...
try to do your upgrades with office turned off!
wish it will help to solve your problem
X-Mouse
Click to expand...
Click to collapse
Hi mouse.co.nr,
Well noted and I'll keep this in mind. From your experience have you ever tried the SDHC.cab so that your phone can read the micro SDHC? I ran it in my phone and now my STORAGE CARD is gone! Anyway, thanks again. Cheers!
Not SDHC my friend but Artemis SDHC,
I don't know what is exactly the difference, maybe one is for big SD and the other is for MicroSD, anyway I've tried the one for artemis and now I'm working with a 8 GB micro sd, and it can go till 16 GB.
I've tried that with other artemis ROM versions and works very good...
For your problem have a look at this post:
http://forum.xda-developers.com/showthread.php?t=345038;
and download the programs indicated below...
What I advice you to do is the following:
1) remove your SDHC card (it have a sort of bad luck with any upgrade that needs a reboot)
2) copy SDHC_Artemis_back2original.cab to your documents folder (PPC documents obviously) then run it, soft reset.
3) then copy the correct SD HC for artemis "SDHC-Artemis.cab ", in the same way of the above and run it.
this shuld work "I wish for you"
let me know..
how about the ROM update? did you succeed at the end?
have you also updated also GSM radio ROM? generally original roms come with a 2.11.... version, old and not always good in reception!
I advice to change it in 03.18.90 shall work well also with your provider, for GSM signal WIFI, GPRS and GPS..
have a look at this post for more details: http://forum.xda-developers.com/showthread.php?t=397939
X-Mouse
mouse.co.nr said:
Not SDHC my friend but Artemis SDHC,
I don't know what is exactly the difference, maybe one is for big SD and the other is for MicroSD, anyway I've tried the one for artemis and now I'm working with a 8 GB micro sd, and it can go till 16 GB.
I've tried that with other artemis ROM versions and works very good...
For your problem have a look at this post:
http://forum.xda-developers.com/showthread.php?t=345038;
and download the programs indicated below...
What I advice you to do is the following:
1) remove your SDHC card (it have a sort of bad luck with any upgrade that needs a reboot)
2) copy SDHC_Artemis_back2original.cab to your documents folder (PPC documents obviously) then run it, soft reset.
3) then copy the correct SD HC for artemis "SDHC-Artemis.cab ", in the same way of the above and run it.
this shuld work "I wish for you"
let me know..
how about the ROM update? did you succeed at the end?
have you also updated also GSM radio ROM? generally original roms come with a 2.11.... version, old and not always good in reception!
I advice to change it in 03.18.90 shall work well also with your provider, for GSM signal WIFI, GPRS and GPS..
have a look at this post for more details: http://forum.xda-developers.com/showthread.php?t=397939
X-Mouse
Click to expand...
Click to collapse
Hi Mouse,
Thanks to you my STORAGE CARD problem is solved! However with regards to my ROM update I'm still a little confused.I've managed to patch the artemis_jumpSPL_pof_v1.nb using Kermit the Frog(jumpSPL.exe). After that I run the RUU again but I still get the same result-0%Can you tell me how or show me the relevant threads?
Hello Salimbs,
Kermit sounds funny but it's the first time I don't know how does it work!!
try the ufficial SPL unlocker for artemis, nothing more,
download from here:
http://forum.xda-developers.com/showthread.php?t=311403
* Connect your PPC through Active Sync (connection shall be established),
* Run start_uspl.exe from the Artemis_USPL package in the link above,
* Run till it reachs 100% and Dos Window turns off alone, and launches RUU upgrade interface..yes, yes, continue, continue.... 100%
* After device shall have SPL 1.11 and so you can load new ROMs
let me know if it will solve the problem..
X-Mouse
mouse.co.nr said:
Hello Salimbs,
Kermit sounds funny but it's the first time I don't know how does it work!!
try the ufficial SPL unlocker for artemis, nothing more,
download from here:
http://forum.xda-developers.com/showthread.php?t=311403
* Connect your PPC through Active Sync (connection shall be established),
* Run start_uspl.exe from the Artemis_USPL package in the link above,
* Run till it reachs 100% and Dos Window turns off alone, and launches RUU upgrade interface..yes, yes, continue, continue.... 100%
* After device shall have SPL 1.11 and so you can load new ROMs
let me know if it will solve the problem..
X-Mouse
Click to expand...
Click to collapse
Hi mouse,
Actually "Kermit the Frog" is the icon for JumpSPL.exe. Anyway, like I've mentioned in my first post everything seems OK except that I can't check for the SPL and when the RUU runs it never gets to more than 0% and then I lose connection and get ERROR 260. I'll be trying again and let you know of the outcome. Once again, thank you, I really appreciate your help!
salimbs.
Hi Salimbs,
sorry for hearing that...
try to enable RAPI before USPL!
http://forum.xda-developers.com/showthread.php?t=320155
Remove SDHC card (and uninstall SDHC software from ppc)
Then USPL
Then Rom Update Utility
mouse.co.nr said:
Hi Salimbs,
sorry for hearing that...
try to enable RAPI before USPL!
http://forum.xda-developers.com/showthread.php?t=320155
Remove SDHC card (and uninstall SDHC software from ppc)
Then USPL
Then Rom Update Utility
Click to expand...
Click to collapse
Hi Mouse,
I'm open to all suggestion. I'll try it again and we'll see. Thanks.
I'm afraid that I've not met with any success after trying all the combination and tricks mentioned in this thread. Every time at the part of the RUU flashing it never goes beyond 0% then I lose connection and get ERROR 260. I would appreciate any help I can get, and thank you in advance.
Hallo,
i have got a p800 from china and have the same problems. I tried all things but the update doesnt work. The connection always interupts with err260.
regards