Database Users

[Q] Cant boot android.

hi there, my hd2 has spl 3.03, radio 2.15 and ROM 3.14. from doing a bit of research on the forums I've found that i can run Android roms without needing to flash. however after trying a few different roms they all seem to freeze on the white htc screen even after leaving them go boot for around 30 mins. can anybody please help me with this issue?
appreciate any help given.

Bump.
Does anybody please have any ideas? I bought the HD2 because I thought I could run android on it...

I've tried multiple ROM and android build combinations and the only one I can get to boot up is from the minimum "energy" package. I've formatted the SD card in each case, and still no luck. I;m new at this whole process so I'm sure I'm screwing something up

Hello!! Me too, i have the same problems : Artemis v44, Rom 3.14, radio 2.15.50.14. and i have 8gb sd card. I tryed different android rom, but it's the same problems.
I continue to try....
Sorry for my bad english.

read the other threads with the same topic on the 1st couple pages...
basicly the proven way to fix it is to format the sdcard to get rid of ghosts that are left over from old data.

Does that mean a full format or Quick format? Ive try quick multiple times. And what first couple of pages are you refering/ Thanks for the response!

full format actualy wipes it, all quick does is removes file names.

you da man! Im doing a 16g......its taking a long time.....is that normal?

Well.....that didnt work. Full format on a 16g SD. Still locks up on HTC screen. Any ideas. Gonna try new SD card tomorrow.

I have the same result, use a new 8g card, android build MCCM_SE_V3.3_FroyoStone_Sense. On my first boot OK. I need to change battery and sim often. switch off and next boot stay on HTC screen forever... Found some solution saying that you must run the two "exe" within 15 sec. after boot into WM, but still doesn't work... help help

Same problem here.
Tried all the steps.
Installed HSPL2
Upgraded radio to: 2.12.50.02
Fully formatted my sd card
Tried several builds (FRG83.MCCM_IR_1.7 & desire hd2)
But it keeps on freezin at the HTC screen when booting.
Any help would be very much appreciated since I'm very much out of guesses.

have you tried deleting cmd line?

Same Problem...
Rom 3.14.407.2
SPL 3.03
Radio: 2.15.50.14
pls help

jose makalolot said:
have you tried deleting cmd line?
Click to expand...
Click to collapse
Nope, I haven't. Could you explain or link me some explanation?
Gr
TJ

teejee said:
Nope, I haven't. Could you explain or link me some explanation?
Gr
TJ
Click to expand...
Click to collapse
open startup.txt and delete the whole line with "set cmd..." then try to boot android again.

jose makalolot said:
open startup.txt and delete the whole line with "set cmd..." then try to boot android again.
Click to expand...
Click to collapse
This got me further yet it didnt work fully. It got me passed the HTC logo and unto the Android logo but then it crashes and fully restarts.... into windows.
So this might be a different problem... any thoughts?

teejee said:
This got me further yet it didnt work fully. It got me passed the HTC logo and unto the Android logo but then it crashes and fully restarts.... into windows.
So this might be a different problem... any thoughts?
Click to expand...
Click to collapse
I can give you a copy of my modded system.ext2 based on mdj 1.7, maybe it will work for you. Maybe we can do it through IM. Just PM me.
By the way, what is your location and carrier? I cant see info, am using phone.
Sent from my HD2 using XDA App

Ive formatted multiple times and have ran different Android ROMs. NOTHING. Only thing that works is the basic one provided by ENERGY. (Thanks by the way). Not that this is a bad ROM, Im just trying to learn about this stuff and its frustrating. I'm sure there is more guidance within the threads, but thats like pretty difficult if you dont know where to look

adb logcat
post it, then we can troubleshoot.
dont know how to do that? search. theres atleast 10 stickies in the forums on adb for dummies.
also, i get kinda tired of folks begging for help that cant even do simple stuff like fill out location, sig line etc... come on throw us a bone.

HELP SD Android won´t boot

Flashed some day´s ago WP7 but I reverted to WINMO again... and when I try to put an Android Built on it won´t boot...
I get a cmd lines, kernel something and it get the HTC screen and it get stuck in it... Tryied lot´s of diferent sd builds but the result is the same.
I already formated my sd, tried in other WINMO rom´s and other sd and the result is the same!
I have HSPL 1.66
I have the last radio
I have the same as always and previously the the Android worked fine...
Strange!!!
HELP
Please

+1 on this...yeah, I'm running into the same issue after running WP7 and formatting. I've been searching it out, but haven't come up with anything yet. Everything else seems to work fine, but if I try to run android (SD build), I get the cmd line info showing haret is running, but that's as far as it goes...

koz said:
+1 on this...yeah, I'm running into the same issue after running WP7 and formatting. I've been searching it out, but haven't come up with anything yet. Everything else seems to work fine, but if I try to run android (SD build), I get the cmd line info showing haret is running, but that's as far as it goes...
Click to expand...
Click to collapse
Yes! That is what´s happening to me
F*****

I thought you had to have HSPL 2.08 as a minimum for Android to run? Maybe I'm wrong...
mm0

muzicman0 said:
I thought you had to have HSPL 2.08 as a minimum for Android to run? Maybe I'm wrong...
mm0
Click to expand...
Click to collapse
Tryed with HSPL 2.08 and the result is the same...

You do need HSPL 2.08 for Magldr, not Android (unless you need to flash a radio).
@OP What is "the last radio"? Can you give us the version please?

lrbpereira said:
I already formated my sd
Click to expand...
Click to collapse
I take it you did this through your computer? Try formatting it with WinMo - don't know how, never used WinMo but it should be possible. This has worked magic for people where all else failed, it had something to do with a partitioning file.

johncmolyneux said:
You do need HSPL 2.08 for Magldr, not Android (unless you need to flash a radio).
@OP What is "the last radio"? Can you give us the version please?
Click to expand...
Click to collapse
2.15.50.14

StephanV said:
I take it you did this through your computer? Try formatting it with WinMo - don't know how, never used WinMo but it should be possible. This has worked magic for people where all else failed, it had something to do with a partitioning file.
Click to expand...
Click to collapse
As I said before, don´t think it´s a SD problem because I tryed with another SD card and the problem is the same... It´s sometinhg that WP7 change on the phone, that blocked the Android... But it´s strange because task29 sould format all the memory, but something remanes there...
Anyone?

Need Help. PLEASE!!!!!!

I can no longer get android to run on my HD2. Here are the details to my problem. Please I really need help, will make it well worth the while of anyone that can sort this problem out for me.
First off, I had been running android on my device for about a month. Then it started just going off and freezing at the android boot logo. Nothing I did would work unless I reinstall the rom.
Then that just stopped working and even after reinstalling a rom (nand) it would never get past the android boot logo after the go go go screen. It would just stay there then restart and the restart loop continues.
I have tried
- task 29
- flashing an official stock rom
- trying different radios even though the one in my sig worked with android just fine
- reflashing HSPL 2.08, MAGLDR and recovery
- formatting my SD cards (over and over again)
- trying different roms....etc
Nothing works. And I have lost count of how many times I have gone through all this.
Please take note that I did have android running on my EU HD2 with the HSPL, radio and rom in my sig on this very phone so I at least know what I am doing.
I just dont get this issue, cause windows mobile runs just fine on my device every single time. My cards read fine too. And even when trying to run an SD rom build, after haret starts up it cuts to the HTC logo and just hangs there too. And I am assuming that if it was my battery or my battery pins it would at least affect the phone generally and not only when trying to boot android.
Please, I really need help as this phone is practically useless to me now.
Any help would be greatly appreciated.

Lorddeff07 said:
I can no longer get android to run on my HD2. Here are the details to my problem. Please I really need help, will make it well worth the while of anyone that can sort this problem out for me.
First off, I had been running android on my device for about a month. Then it started just going off and freezing at the android boot logo. Nothing I did would work unless I reinstall the rom.
Then that just stopped working and even after reinstalling a rom (nand) it would never get past the android boot logo after the go go go screen. It would just stay there then restart and the restart loop continues.
I have tried
- task 29
- flashing an official stock rom
- trying different radios even though the one in my sig worked with android just fine
- reflashing HSPL 2.08, MAGLDR and recovery
- formatting my SD cards (over and over again)
- trying different roms....etc
Nothing works. And I have lost count of how many times I have gone through all this.
Please take note that I did have android running on my EU HD2 with the HSPL, radio and rom in my sig on this very phone so I at least know what I am doing.
I just dont get this issue, cause windows mobile runs just fine on my device every single time. My cards read fine too. And even when trying to run an SD rom build, after haret starts up it cuts to the HTC logo and just hangs there too. And I am assuming that if it was my battery or my battery pins it would at least affect the phone generally and not only when trying to boot android.
Please, I really need help as this phone is practically useless to me now.
Any help would be greatly appreciated.
Click to expand...
Click to collapse
Have you tried running a CLK build or just MAGLDR or SD builds?
As far as i know (sorry if this is nonsense ) the HD2 runs natively on ppp not on rmnet, magldr (and sd?) pushes something in the radio so that rmnet can be used, maybe something in that direction went wrong with your phone?

Cheech1976 said:
Have you tried running a CLK build or just MAGLDR or SD builds?
As far as i know (sorry if this is nonsense ) the HD2 runs natively on ppp not on rmnet, magldr (and sd?) pushes something in the radio so that rmnet can be used, maybe something in that direction went wrong with your phone?
Click to expand...
Click to collapse
Well I have only been trying MAGLDR and SD roms but never CLK. Guess I can give that a shot. But assuming something weird is going on with my radio, shouldn't it have fixed itself considering the amount of radios I have used and the amount of task 29s I have done?
Thanks for the suggestion though, will give that a go today.

Lorddeff07 said:
Well I have only been trying MAGLDR and SD roms but never CLK. Guess I can give that a shot. But assuming something weird is going on with my radio, shouldn't it have fixed itself considering the amount of radios I have used and the amount of task 29s I have done?
Thanks for the suggestion though, will give that a go today.
Click to expand...
Click to collapse
Well before i get flamed by those who know better, i would ask you to look for threads covering this topic, i.e. the difference between ppp and rmnet and which one is used with which one etc.
I have read in another forum that the hd2 runs natively with ppp, but magldr pushes something "in" the radio rom while booting, so the radio looks like a desire, so the android builds can run on rmnet...
Or something like that, what i have gathered from this is, that there is a difference and since it sounded like you were running out of options, i thought i´d propose installing a clk build

Lorddeff07 said:
I have tried
- task 29
- flashing an official stock rom
- trying different radios even though the one in my sig worked with android just fine
- reflashing HSPL 2.08, MAGLDR and recovery
- formatting my SD cards (over and over again)
- trying different roms....etc
Click to expand...
Click to collapse
Can you elaborate "formatting my SD cards" a little?
As in how, which tools, were was the partitioning done if any?

Lorddeff07 said:
Well I have only been trying MAGLDR and SD roms but never CLK. Guess I can give that a shot. But assuming something weird is going on with my radio, shouldn't it have fixed itself considering the amount of radios I have used and the amount of task 29s I have done?
Thanks for the suggestion though, will give that a go today.
Click to expand...
Click to collapse
Hi,
Sometimes boot loops occur when the battery pins are out of shape.
Make sure all your battery pins are aligned and see if that helps.

Cheech1976 said:
Well before i get flamed by those who know better, i would ask you to look for threads covering this topic, i.e. the difference between ppp and rmnet and which one is used with which one etc.
I have read in another forum that the hd2 runs natively with ppp, but magldr pushes something "in" the radio rom while booting, so the radio looks like a desire, so the android builds can run on rmnet...
Or something like that, what i have gathered from this is, that there is a difference and since it sounded like you were running out of options, i thought i´d propose installing a clk build
Click to expand...
Click to collapse
Looking into trying a CLK build now. Actually just finished downloading one.
Cheech1976 said:
Can you elaborate "formatting my SD cards" a little?
Click to expand...
Click to collapse
Ok, i have a total of 3 SD cards. One 16GB, one 4GB and the last one 2GB. I have used both gParted and partition wizard. Did full 30 mins (approx) wipes on the cards and had them formatted to fat32. For the 16GB card I try that with the ext3/4 partions. Tried using both 4kB and 32KB cluster sizes.
And again, I had actually got android running on my phone before. And even tried different roms at that time so I have some idea what I am doing. I don't have any issues reading my cards either from a card reader or through the phone.
malybru said:
Hi,
Sometimes boot loops occur when the battery pins are out of shape.
Make sure all your battery pins are aligned and see if that helps.
Click to expand...
Click to collapse
Yeah read about that, I have tried straightening my pins and all that but nothing changes. And I would think that if the pins are the issue then I would at least hav some issues running windows mobile 6.5 too. I have never had such issues running WM ever. Android on the other hand just refuses to run.

Lorddeff07 said:
Yeah read about that, I have tried straightening my pins and all that but nothing changes. And I would think that if the pins are the issue then I would at least hav some issues running windows mobile 6.5 too. I have never had such issues running WM ever. Android on the other hand just refuses to run.
Click to expand...
Click to collapse
Hi,
The only thing I can think of is maybe some corrupt software along the way.
May I suggest using KSUBEDI's TOOLKIT (Don't forget to thank him).
Run through the whole process using his toolkit.
It worked for me.
Start from
HSPL 2.08 HSPL
Task 29
Radio HERE
Magldr
CWM partition for the ROM you intend to use
ROM

malybru said:
Hi,
The only thing I can think of is maybe some corrupt software along the way.
May I suggest using KSUBEDI's TOOLKIT (Don't forget to thank him).
Run through the whole process using his toolkit.
It worked for me.
Start from
HSPL 2.08 HSPL
Task 29
Radio HERE
Magldr
CWM partition for the ROM you intend to use
ROM
Click to expand...
Click to collapse
Just did all that (again). And exactly in that order. As always, it installs just fine but it always hangs on the android logo right after the go go go screen for about 20-30 secs then it restarts. Over and over again.

Lorddeff07 said:
Just did all that (again). And exactly in that order. As always, it installs just fine but it always hangs on the android logo right after the go go go screen for about 20-30 secs then it restarts. Over and over again.
Click to expand...
Click to collapse
Hi,
What ROM are you installing, and what CWM partition are you using?

Lorddeff07 said:
Ok, i have a total of 3 SD cards. One 16GB, one 4GB and the last one 2GB. I have used both gParted and partition wizard. Did full 30 mins (approx) wipes on the cards and had them formatted to fat32. For the 16GB card I try that with the ext3/4 partions. Tried using both 4kB and 32KB cluster sizes.
And again, I had actually got android running on my phone before. And even tried different roms at that time so I have some idea what I am doing. I don't have any issues reading my cards either from a card reader or through the phone.
Click to expand...
Click to collapse
Didn´t mean to let it sound like you don´t know what you´re doing, just trying to narrow it down and the sd cards can be the culprit for so many bugs, so it was worth a shot
Lorddeff07 said:
Just did all that (again). And exactly in that order. As always, it installs just fine but it always hangs on the android logo right after the go go go screen for about 20-30 secs then it restarts. Over and over again.
Click to expand...
Click to collapse
malybru said:
Hi,
What ROM are you installing, and what CWM partition are you using?
Click to expand...
Click to collapse
Especially the NAND partition used in flash.cfg would be interesting, maybe there´s something wrong with that, that would be consistent with the failure to boot, wouldn´t it?
Other than that, i have to admit, slowly but surely this leaves my area "of expertise"
I sure hope you get your phone running again! I´ll keep my fingers crossed!

malybru said:
Hi,
What ROM are you installing, and what CWM partition are you using?
Click to expand...
Click to collapse
I am installing HyperDroidGBX-v12[GRI54-2.3.3][a2sd+][TytR8.3] and using the required 150mb partition size. I had got this very rom and RAFDROID rom (though with a 400mb partition) to work on my phone previously.
I also got the a couple of SD based roms to work on my device before nand roms became available now even those dont work too.
Just tried CLK for the first time and flashed the CLK version of the aforementioned rom. Been on the white HTC screen for about 10mins now.

Cheech1976 said:
Didn´t mean to let it sound like you don´t know what you´re doing, just trying to narrow it down and the sd cards can be the culprit for so many bugs, so it was worth a shot
Especially the NAND partition used in flash.cfg would be interesting, maybe there´s something wrong with that, that would be consistent with the failure to boot, wouldn´t it?
Other than that, i have to admit, slowly but surely this leaves my area "of expertise"
I sure hope you get your phone running again! I´ll keep my fingers crossed!
Click to expand...
Click to collapse
Trust me, no offense taken what so ever .
I am aware that SD card errors could be the issue, but all three SD cards? even stranger since I have never used 2 of those 3 for any android install.
What really puzzles me though is that regardless of whatever issues i seem to be having... windows mobile runs just fine every single time. My only guess now may be that teher may be something wrong on the hardware side with how my SD card and phone syncs so something always goes wrong during the install. If that is the case the only possible solution would be if it was some how possible to install a rom directly from my PC without using an Sd card at all.

Lorddeff07 said:
Trust me, no offense taken what so ever .
I am aware that SD card errors could be the issue, but all three SD cards? even stranger since I have never used 2 of those 3 for any android install.
What really puzzles me though is that regardless of whatever issues i seem to be having... windows mobile runs just fine every single time. My only guess now may be that teher may be something wrong on the hardware side with how my SD card and phone syncs so something always goes wrong during the install. If that is the case the only possible solution would be if it was some how possible to install a rom directly from my PC without using an Sd card at all.
Click to expand...
Click to collapse
Hi,
That would mean making a DAF.exe file and install it the old fashioned way.
Sadly,beyond my level of expertise.
Good luck.

Lorddeff07 said:
Trust me, no offense taken what so ever .
I am aware that SD card errors could be the issue, but all three SD cards? even stranger since I have never used 2 of those 3 for any android install.
What really puzzles me though is that regardless of whatever issues i seem to be having... windows mobile runs just fine every single time. My only guess now may be that teher may be something wrong on the hardware side with how my SD card and phone syncs so something always goes wrong during the install. If that is the case the only possible solution would be if it was some how possible to install a rom directly from my PC without using an Sd card at all.
Click to expand...
Click to collapse
Sorry but i am at a loss for any further possible advice for you. I would propose the build i am using for you to install.
It installs with the according daf.exe and after that you can install the zip file via cwm. I never flashed another android build myself, what with all this nand partitioning (i have heard of it, but never had to set it up myself), so i don´t really know how the nand partitioning is done without daf.exe and the according flash.cfg file.

Cheech1976 said:
Sorry but i am at a loss for any further possible advice for you. I would propose the build i am using for you to install.
It installs with the according daf.exe and after that you can install the zip file via cwm. I never flashed another android build myself, what with all this nand partitioning (i have heard of it, but never had to set it up myself), so i don´t really know how the nand partitioning is done without daf.exe and the according flash.cfg file.
Click to expand...
Click to collapse
Thanks, will try. I have given up though. been working on this thing for too long. Guess its time to buy the galaxy s2. I really loved this phone. And windows mobile just doesn't cut it.

Lorddeff07 said:
Thanks, will try. I have given up though. been working on this thing for too long. Guess its time to buy the galaxy s2. I really loved this phone. And windows mobile just doesn't cut it.
Click to expand...
Click to collapse
Hi,
Just before you bin it,how have you been formatting the sd card?
Have a look at this:
"You should also properly format your sdcard with Panasonic SDFormatter (Full+Overwrite+size adjust). Then in recovery>advanced>sd partition (1GB+0MB swap) If you have a EU HD2 and need the extra data storage/rom requires it. "
Worth a shot.

Dont give up!
Might be a long shot, But have you tried turning off your antivirus software during the installation? Ive seen a few of your posts about and i hope you get it to work again. Bet your sick of the sight of task29 lol

malybru said:
Hi,
Just before you bin it,how have you been formatting the sd card?
Have a look at this:
"You should also properly format your sdcard with Panasonic SDFormatter (Full+Overwrite+size adjust). Then in recovery>advanced>sd partition (1GB+0MB swap) If you have a EU HD2 and need the extra data storage/rom requires it. "
Worth a shot.
Click to expand...
Click to collapse
yeah I have tried that too. Still leaves me hanging at the android logo right after the go go go screen. Truth is that I have come to the conclusion that nothing i am doing will actually work. Cause all these things mentioned now I have already done and didn't even need to do half of them at one point when i was actually running android on my phone.
The fact that I cant even run the SD card builds of android just goes to show that something must be very wrong with my phone now. It could be battery related or something but that doesn't make sense either cause WinMO 6.5 roms work fine every singel time.
I just dont get it really.

fuuunkdat said:
Might be a long shot, But have you tried turning off your antivirus software during the installation? Ive seen a few of your posts about and i hope you get it to work again. Bet your sick of the sight of task29 lol
Click to expand...
Click to collapse
Lol.... you have no idea lol
Its sad no doubt, but I am actually happy for the amount of help offered by a lot of ppl here in the xda community.
So at least I am taking it all in good spirits. Oh, I have probably tried that at one point too....
The only thing I can think of now is to flash my HSPL back to spl 1.66 and revert back to factory setting, then try and reflsah the 2.08 HSPL. Though I dont know what difference taht will make considering how many times i have reflsahed the very same 2.08 HSPL so at least i know I have a clean fresh one on my phone now lol.

Nand boot image problem

Hello guys!
I have a major problem with NAND booting:
I can't boot any of the nand roms, neither with clK, nore with the MagLdr.
Tried and installed lots of nand roms. It does install them but they won't boot:
-in MagLdr it gets stucked on 123456 GO GO GO!
-in clK stucked on [260] -- suspend -- | when I fastboot-continue so it will force boot, I get [168210] ERROR: Invaled boot image header
Tried and installed a winmo6.5 rom and it works perfect.
Anyone encountered this problem before, or does somebody have any ideea how to recover my nand boot image? I really need my AD back

do you make the proper nand partition for the rom you want to flash?

visanciprian said:
Hello guys!
I have a major problem with NAND booting:
I can't boot any of the nand roms, neither with clK, nore with the MagLdr.
Tried and installed lots of nand roms. It does install them but they won't boot:
-in MagLdr it gets stucked on 123456 GO GO GO!
-in clK stucked on [260] -- suspend -- | when I fastboot-continue so it will force boot, I get [168210] ERROR: Invaled boot image header
Tried and installed a winmo6.5 rom and it works perfect.
Anyone encountered this problem before, or does somebody have any ideea how to recover my nand boot image? I really need my AD back
Click to expand...
Click to collapse
I have the same problem. I used this ROM:
http://forum.xda-developers.com/showthread.php?t=1434860
and 220 MB for system partition and 5MB for cache partition.
It's my wife's HD2 and it's the second i try to install Android on. The first was mine it's working perfectly with the same partition sizes. I have really no clue why is not working and my wife is looking for the crowbar right now...
PLEASE HELP!

^ try to redo everything & try the SD version of that ROM if it will boot.
just run it from magldr

Thank you for answering.
I tried to redo everything and got the same results. I'm thinking to go back to Win 6.5 to see if it works for me too, but I'm not sure how to do it... I'm thinking to wipe with Task29 and then to install Win 6.5. Will it work this way?
Many thanks!
EDIT: I've got the WWE 3.14... from here: http://forum.xda-developers.com/showthread.php?t=623283 and it's working perfectly. I can't believe how easy it was to install win 6.5 again... Just enter bootloader and run the exe... Too bad I can't have ICS on it, but I'm glad it's not bricked and it's working.
Thank you!

Kahless The Klingon said:
Thank you for answering.
I tried to redo everything and got the same results. I'm thinking to go back to Win 6.5 to see if it works for me too, but I'm not sure how to do it... I'm thinking to wipe with Task29 and then to install Win 6.5. Will it work this way?
Many thanks!
EDIT: I've got the WWE 3.14... from here: http://forum.xda-developers.com/showthread.php?t=623283 and it's working perfectly. I can't believe how easy it was to install win 6.5 again... Just enter bootloader and run the exe... Too bad I can't have ICS on it, but I'm glad it's not bricked and it's working.
Thank you!
Click to expand...
Click to collapse
Hey! saw you quoted me and since that was an old post, lots of things happened in this long time..
I found out what my problem was: bad blocks on NAND; so i contacted cedesmith-developer of cLK (since he's a romanian like us ) and tried to figure out with him.. we discovered that there were bad blocks on BOOT partition -> so I managed to solve it with the increase of the RECOVERY partition size (to 10MB) - so we actually moved the BOOT partition away from the bads..
worked for a while (especially with small-size system ROMs) then I wanted to get some cocky bigger ROMs and found out I have bads on the USERDATA partition aswell - the reason why, now, I'm getting some nasty spontaneous restarts..
at the moment I'm running an ICS NAND-build (after I ran some time an ICS SD-build) - but with this disadvantage of those restarts..
so, as a conclusion! if you want an ICS build and no headaches, go for a SD-version! with a 10-class SD you'll have no problems; it will run pretty smooth (search for smaller versions)
have a good evening!

Thank you very much!
I think I'll stay with win 6.5 at least for a while and I'll try an SD version of ICS, as you recommended. I have a class 6 SD now, but I will follow your advice and get a class 10 for this. On the other hand, as I said, it's my wife's phone, so she has the last word. I just wish she will never ask for an iPhone... That might be a divorce matter...
I hope this thread will help others too.
Thank you very much again!

Do try using the task29 to wipe your Mobiles internal memory. Be sure to wipe your sd card before this. Then dont install windows mobile 6.5. Flash MAGLDR right away. try installing the CWM and the rom.
Give a thanks if you found this helpful

Thank you, but I already tried that. With no results...

Kahless The Klingon said:
Thank you very much!
I think I'll stay with win 6.5 at least for a while and I'll try an SD version of ICS, as you recommended. I have a class 6 SD now, but I will follow your advice and get a class 10 for this. On the other hand, as I said, it's my wife's phone, so she has the last word. I just wish she will never ask for an iPhone... That might be a divorce matter...
I hope this thread will help others too.
Thank you very much again!
Click to expand...
Click to collapse
i thought it was decided that anything above a class 4 or 6 would not help and could actually be slower.
i think those fast cards are only for a camera which needs to write as fast as possible.
search here on xda for read write speeds.
get CrystalDiskMark (free) if you want to test the card speeds for yourself.
whatever you decide to get make sure its a good brand of card.
no need to spend money you dont need to

HI. so exactly wat happens? where do u go wrong. and wat happens on those screens? please do mention

Thanks gazzacbr. It's good to know that.
For adil1508: Well... It seems that I didn't do anything wrong... It seems that the phone has too many bad sectors and, after all, is kind of bricked anyway. Even with win 6.5 the phone keeps restarting every 15-20 minutes.

Kahless The Klingon said:
Thanks gazzacbr. It's good to know that.
For adil1508: Well... It seems that I didn't do anything wrong... It seems that the phone has too many bad sectors and, after all, is kind of bricked anyway. Even with win 6.5 the phone keeps restarting every 15-20 minutes.
Click to expand...
Click to collapse
Might be time to upgrade to a One X

Nigeldg said:
Might be time to upgrade to a One X
Click to expand...
Click to collapse
I would very much like that but it's much to expensive for me. Almost my salary for two months. Can't afford it.

[Q] Help me

Hi everybody!
I flashed WP7 for my HD2, but when installed, the fist time boot up HD2 only runs to gogogo is to restart itself. I removed the battery for about 5 minutes and restarted the WP7 again, but it's only runs about 15 minutes to restart itself and repeat the above error.
Any help?

Task29-Format Your SD Card -Install WM -Install Magldr-Do Two Wipe-Install WP7 Rom
Have Fun

Thanks for your reply.
I did as your guide, But the HD2 still fails as above

so did it work on WM (6.5) ok or not.
You must be missing a step somewhere

ahhynt branch
It Ok, I flashed WM 6.5 or Android, It work OK.

me too
Me too.
Please tell me when slove it,thanks.

so the first thing that comes to mind assuming you have had Android and WM6.5 working is the SD card.
The big difference is that WP7 needs a good working SD card in order to operate.
At the first install and boot it needs to see a clean formatted card ( FAT 32) or wont work.
Also directly after your WP 7 flash you have to hard reset the phone !!!
Are you sure you have the correct HSPL
Are you sure you have flashed the correct radio for the rom you are trying to flash.
Good luck

Hi!
I have replaced another memory card and flash the WP7, but it boot is very difficult, stop and reboot it in "go go go", I must remove the battery then re-start, and it runs very well. What's must I do?

check to Make sure your battery contacts are making proper contact with battery.

alphaacres said:
check to Make sure your battery contacts are making proper contact with battery.
Click to expand...
Click to collapse
I don't undestand????

KCTV 123 said:
I don't undestand????
Click to expand...
Click to collapse
battery??? you don't need to install wm6.5 everytime you want install wp7. just task29...install magdlr...perform the necessary magdlr prep steps (10-services, 5-clear mbr, 4-uselast24nand)..then flash wp7.
also, if your sd was not usable...it would have at least booted and told you the sd was bad. but make sure you do the magdlr prep steps before flashing wp7.
as for the battery, he's saying that sometimes the middle battery contact has a tendency to be out of place...check your contacts are all in correct position.