[Q] How to test Nand rom? - HD2 Android Q&A, Help & Troubleshooting and Genera

recently jus port over from Sd build to nand and wanted to ask is there anyway we can test rom like what i used to do when i am using Sd build , because sd build all we need is copy and paste to SD folder and boot up but nand does not allow that.
So question is ,is there anyway we can backup the whole rom and head over to test other nand rom and if we not satifed then switch back to my default (hyperdroid) without losting any data
how can i check if i am running or ext3 or ext4?
thanks in advanced cheers!

.hide said:
recently jus port over from Sd build to nand and wanted to ask is there anyway we can test rom like what i used to do when i am using Sd build , because sd build all we need is copy and paste to SD folder and boot up but nand does not allow that.
So question is ,is there anyway we can backup the whole rom and head over to test other nand rom and if we not satifed then switch back to my default (hyperdroid) without losting any data
how can i check if i am running or ext3 or ext4?
thanks in advanced cheers!
Click to expand...
Click to collapse
You can backup the whole rom using clockworkmod + u can check if you have a ext3/4 using titaniumbackup

i have titanium back up, how i can check it? and what is the difference between ext3 and ext 4?

.hide said:
i have titanium back up, how i can check it? and what is the difference between ext3 and ext 4?
Click to expand...
Click to collapse
when you first open titanium backup, you will see sd card storage and phone memory.. If you have ext there, then yes you have it if not.. then no
http://tinyurl.com/5ujd2qz
http://tinyurl.com/ox64n
http://tinyurl.com/sw9rx

Related

How to setup apps2sd?

Can anyone explain to me how i would setup apps2sd as i have no idea how i would set it up.
i think this way will be a "fail safe" way to do it. but it will/could take an extra install of a ROM.
Back up whole SD-card to example a PC.
install ẂildPuzzleROM
Start Rom Manager and choose partition SD-card and something similar.
Choose size of the ext-partition for example 512mb and you DONT need a swap.
You should now have an ext-partition and the phone should reboot automatic.
Now you can choose to upload all files you wanna flash to a folder on sd-card and reinstall rom and flash apps2sd files.
Hope this helps.
Regards Daniel
ps. their are many ways to make a partition on a sd-card, but this way should work for all users on what ever system and hardware they have.
how do i move existing apps to sd?
Same problem , I have the EXT partition, I have puzzle rom with the corrects zip installed.
But how can i move app to SD.....
is there a menu, do i need to make a cp ?
app2sd
WildPuzzleROM v6 is still as unstable, can be installed app2sd to Update 1.25.405.1? (I tried to stick 0005 + 0010 but I got stuck gadesc that I did something right) is a little help if possible?
sry for my english , i hope u understan what i mean
andylyf said:
how do i move existing apps to sd?
Click to expand...
Click to collapse
read bellow
niko83dk said:
Same problem , I have the EXT partition, I have puzzle rom with the corrects zip installed.
But how can i move app to SD.....
is there a menu, do i need to make a cp ?
Click to expand...
Click to collapse
If you have an ext partition on your SD, then you should have flashed the apps2sd package, you had rebooted your phone and it TOOK SO MUCH TIME, well apps2sd did move every apps to SD at this moment, apps2sd doesn't allow to choose between phone's and SD memory, that's the way froyo handle this feature.
qwerr said:
WildPuzzleROM v6 is still as unstable, can be installed app2sd to Update 1.25.405.1? (I tried to stick 0005 + 0010 but I got stuck gadesc that I did something right) is a little help if possible?
sry for my english , i hope u understan what i mean
Click to expand...
Click to collapse
Nandroid backup => format SD card with an ext partition (rom manager) => do a full wipe => flash v6 + apps2sd + move dalvik cache, reboot and wait a long moment before the lockscreen shows up. Voila ! Stable v6 with apps2sd !
If you have an ext partition on your SD, then you should have flashed the apps2sd package, you had rebooted your phone and it TOOK SO MUCH TIME, well apps2sd did move every apps to SD at this moment, apps2sd doesn't allow to choose between phone's and SD memory, that's the way froyo handle this feature.
Click to expand...
Click to collapse
And what does it do with new installed apps. Does it write it to SD or intern mem?

[Q] SD partition

Hi,
Today i flashed with succes my first android rom Hyperdroid GBX v12, Gingerbread 2.3.3
But i missing sense in this rom so i wish an other rom with sense. I started to partitining my sd card but i get scared and flashed the same rom again.
1. can i flash each nand rom from sd card
2. if not is it possible to undo the partitining of th sd card
I'm so glad that i am windows free
arjanbannie said:
Hi,
Today i flashed with succes my first android rom Hyperdroid GBX v12, Gingerbread 2.3.3
But i missing sense in this rom so i wish an other rom with sense. I started to partitining my sd card but i get scared and flashed the same rom again.
1. can i flash each nand rom from sd card
2. if not is it possible to undo the partitining of th sd card
I'm so glad that i am windows free
Click to expand...
Click to collapse
I didn't' get it! What scares you? You should partition your sd if its needed. Some ROMs, especially Sense, required SD Partition. If you skip this part the rom wouldnt boot. And the instalation is from SD!
First of all, don't be scared flashing a ROM. One of the only ways to brick a HD2 is by flashing the wrong radio.
Partitioning the SD card? Just use minitool partition manager or easeus partition manager (both work fine) and then create your Ext3 partition there. Just make sure you have the files on your SD card backed up to your PC as when you're partitioning, it'll need to format the card.
EDIT: to answer your questions...
1) it's only possible to have one android rom installed at one particular time.
2) it is possible to wipe the partition on your sd card to make it full capacity again. Search for 'Panasonic SD Formatter' and that works just fine.
Sent from my GT-I9100 using XDA App
both of you thanks a lot for the quick reaction.
What scares me is that when i put a new rom at my sd card and flash it, is that enough or do i have to delete the old first???
And second, does it mather what kind of rom i flash there are to much to choose i think. i have a european model so i shouldnt choose the tmous models are all other roms save to flash?
What the heck i did it!!!!
No thinking just doing!!!!
but now its hanging on the start up
so back to the first flash who worked is there anyone who knows what i am doing wrong????
You should have enough space to have more than one rom on your SD card. Why it's looping on boot is because you have the wrong clockwork partition. In each rom it should be outlined as to what size you need the partition, then just reflash the right size clockwork from magldr/cLK.
Sent from my GT-I9100 using XDA App
Skellyyy said:
You should have enough space to have more than one rom on your SD card. Why it's looping on boot is because you have the wrong clockwork partition. In each rom it should be outlined as to what size you need the partition, then just reflash the right size clockwork from magldr/cLK.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
do i need the panasonic sd formatter before doing this?
Nope you don't need to do anything to the SD card partition. It's the internal memory you're partitioning to make room for your ROM. Can't remember exactly but you can just edit one of the files that you've got in your clockwork folder to change the partition size or just go to the clockwork thread and download the partition size clockwork you need.
Sent from my GT-I9100 using XDA App

[Q] Move apps from sd-ext to NAND, then repartition SD card

Hi guys,
I've installed a CM7 ROM then installed S2E, then flashed an AOSP build to replace it. When I try to use S2E to move the apps back to NAND from sd-ext, it shows up in NAND in the first couple of boots, but later on goes back to sd-ext without S2E doing the job. I kinda figured that it's built into the ROM to move the apps to sd-ext.
What would be the safest way to move the apps from sd-ext back to /data/app, and then repartition my SD card into a single partition and use its whole storage capacity?
Thanks in advance!
ejebyte said:
Hi guys,
I've installed a CM7 ROM then installed S2E, then flashed an AOSP build to replace it. When I try to use S2E to move the apps back to NAND from sd-ext, it shows up in NAND in the first couple of boots, but later on goes back to sd-ext without S2E doing the job. I kinda figured that it's built into the ROM to move the apps to sd-ext.
What would be the safest way to move the apps from sd-ext back to /data/app, and then repartition my SD card into a single partition and use its whole storage capacity?
Thanks in advance!
Click to expand...
Click to collapse
try link2sd in the market,it's free,but once you've moved all u want to,boot into recovery and wipe cache partition and wipe dalvik,that MIGHT do the trick
one question, how do you want to partition your sd? i mean one fat or one ext partition? But seriously, one partition is a bad idea, i wouldnt recommend that.
@Ty5982, Thanks for the input! Will try that later.
@greg17477, I'm using Windows so I want to format it to a single Fat32 partition. What's your recommendation?
Partition ur sd card in recovery with 1gb and swap size 64mb,THEN,open link2sd and when u 1st open it,it checks your phone and sd card then prompts u were u want to send apps to,ext 2,3,4 or FAT 32,select FAT 32 as its what u want,then a error msg will appear,reboot,then open link2sd and now you've got your fat 32 lol
Sent from my HTC Sensation XL with Beats Audio X315e using xda premium
Ty5982 said:
Partition ur sd card in recovery with 1gb and swap size 64mb,THEN,open link2sd and when u 1st open it,it checks your phone and sd card then prompts u were u want to send apps to,ext 2,3,4 or FAT 32,select FAT 32 as its what u want,then a error msg will appear,reboot,then open link2sd and now you've got your fat 32 lol
Sent from my HTC Sensation XL with Beats Audio X315e using xda premium
Click to expand...
Click to collapse
Won't that have moved his apps to a fat32 partition?
If I'm reading this correctly what the OP wants is to move his apps to NAND so he can format his sd card to its full capacity in FAT32, presumably so he can use it as a normal SD card (eg for a camera, moving files etc)
I personally use a very popular app called DarkTremors Apps2SD GUI, it comes preinstalled on a lot of custom ROMS. This app checks where your apps are when you launch it, and gives you the option to either move them to SD-EXT or back again. Launch APPS2SDGUI, let it check your system, then click 'Apps are on SD!' to move them back to NAND.
P.S. I don't think you can wipe the SD-EXT partition off the SD card using Windows' built-in formatter. There are lots of freeware apps that can and will do this though, google is your friend =]
jwchips said:
Won't that have moved his apps to a fat32 partition?
If I'm reading this correctly what the OP wants is to move his apps to NAND so he can format his sd card to its full capacity in FAT32, presumably so he can use it as a normal SD card (eg for a camera, moving files etc)
I personally use a very popular app called DarkTremors Apps2SD GUI, it comes preinstalled on a lot of custom ROMS. This app checks where your apps are when you launch it, and gives you the option to either move them to SD-EXT or back again. Launch APPS2SDGUI, let it check your system, then click 'Apps are on SD!' to move them back to NAND.
P.S. I don't think you can wipe the SD-EXT partition off the SD card using Windows' built-in formatter. There are lots of freeware apps that can and will do this though, google is your friend =]
Click to expand...
Click to collapse
@Ty5982, unfortunately it didn't work. It went badly and I lost the apps in sd-ext so I ended up restoring them..
@jwchips, thanks! Will try that one instead. Yep, I've read about the tools/apps that can be used to partition/format storage devices with EXT. Thanks again.
ejebyte said:
@Ty5982, Thanks for the input! Will try that later.
@greg17477, I'm using Windows so I want to format it to a single Fat32 partition. What's your recommendation?
Click to expand...
Click to collapse
well i would recommend tu have 2 partitions, ext and fat. Just to be safe or prapared in case your want to try a different rom. Nowadayes almost every rom uses ext partition. And you won't run out of space, if you install some more apps.
greg17477 said:
well i would recommend tu have 2 partitions, ext and fat. Just to be safe or prapared in case your want to try a different rom. Nowadayes almost every rom uses ext partition. And you won't run out of space, if you install some more apps.
Click to expand...
Click to collapse
I see. Thanks! Currently I have a 512MB EXT partition on my SD card. I thought I'd be able to choose which apps to move there but it seems my ROM automatically symlinks the apps installed to the EXT partition.
So I decided I want to just install the apps to NAND since I don't really install a lot of apps and I'm using a TMOUS HD2, just for an extra boost in performance compared to when apps are installed to SD-EXT. Then I'll just selectively move apps to SD.
ejebyte said:
I see. Thanks! Currently I have a 512MB EXT partition on my SD card. I thought I'd be able to choose which apps to move there but it seems my ROM automatically symlinks the apps installed to the EXT partition.
So I decided I want to just install the apps to NAND since I don't really install a lot of apps and I'm using a TMOUS HD2, just for an extra boost in performance compared to when apps are installed to SD-EXT. Then I'll just selectively move apps to SD.
Click to expand...
Click to collapse
ah ok, on TMOUS HD2 you might do not need an ext partition
greg17477 said:
ah ok, on TMOUS HD2 you might do not need an ext partition
Click to expand...
Click to collapse
That's what I've figured..
I might just back-up everything then re-flash and repartition my phone and SD card. Anyway, thanks everyone!
ejebyte said:
That's what I've figured..
I might just back-up everything then re-flash and repartition my phone and SD card. Anyway, thanks everyone!
Click to expand...
Click to collapse
Hi, I hope you guys are still around, I´ve been looking for an answer and can´t find anything, heres the question I posted on another thread:
I´ve been having trouble with my phone freezing even after full wipes, so I´ve come to the conclusion my sdcard is corrupt.
So I want to go through the Gparted process to format and re-partition my sdcard.
Currently I have 16GB class 6, which has the recommended FAT32 and 1GB ext4.
Is it safe (or even possible) to format the sd card now. I tried with Gparted and only the FAT32 partition showed up???
The rom is runnymede aio which requires the ext4
Thanks
colinmc8 said:
Hi, I hope you guys are still around, I´ve been looking for an answer and can´t find anything, heres the question I posted on another thread:
I´ve been having trouble with my phone freezing even after full wipes, so I´ve come to the conclusion my sdcard is corrupt.
So I want to go through the Gparted process to format and re-partition my sdcard.
Currently I have 16GB class 6, which has the recommended FAT32 and 1GB ext4.
Is it safe (or even possible) to format the sd card now. I tried with Gparted and only the FAT32 partition showed up???
The rom is runnymede aio which requires the ext4
Thanks
Click to expand...
Click to collapse
be sure to format both partitions as primary.

[Q] Moving from SD to NativeSD

Hi all,
I apologize for not posting into the appropriate develeopment thread but I am not allowed to post there.
[17.Sep.2012][MAGLDR/SD][NativeSD] NexusHD2-ICS-4.0.4-CM9-HWA-SD V2.7
Is there a way to move from a working SD build to this NativeSD build without losing everything? I imagine it can be done with TitaniumBackup but I wonder if I could somehow simply copy the contents of the *.ext4 files to the new EXT4 partition somewhere?
Thanks.
If you are already using an ext 4 for app2sd on your nand ..don't worry ...you can install native SD rom without problem ..and not losing data..native SD rom files get installed in a folder called native SD and your nand rom files are on the root of the ext 4..so you can have both using the same ext4
If you are using an SD build ..that means your files are on fat32 part...copy that..make a back up on PC..make SD ext 4 partition ...install native SD build ...copy back the backup on fat32 portion and you are good to go...you can have both
Sent from my HTC HD2 using Tapatalk 2
---------- Post added at 03:22 PM ---------- Previous post was at 03:16 PM ----------
Wait...how come you have files on ext4 using your old SD build?
Sent from my HTC HD2 using Tapatalk 2
Thank you. I am currently using an SD build, my SD card is FAT32-formatted. Are you saying that all I need to to do is backup everything from the SD card to my PC, repartition to FAT32 + EXT4, copy back to the FAT32 and install the NativeSD build to the EXT4 partition? Will the new NativeSD build use the data from my existing data.ext4 automatically somehow?
Wait...how come you have files on ext4 using your old SD build?
Click to expand...
Click to collapse
I don't have files on ext4, but I have "system.ext4" and "data.ext4" in my Android dir on the SD card.
Hacker4748 said:
Thank you. I am currently using an SD build, my SD card is FAT32-formatted. Are you saying that all I need to to do is backup everything from the SD card to my PC, repartition to FAT32 + EXT4, copy back to the FAT32 and install the NativeSD build to the EXT4 partition? Will the new NativeSD build use the data from my existing data.ext4 automatically somehow?
I don't have files on ext4, but I have "system.ext4" and "data.ext4" in my Android dir on the SD card.
Click to expand...
Click to collapse
Hello Hacker4748,
I would recommend to create a fresh data.ext4 from your NativeSD build once it is installed. I also recommend strongly to format your SD card after you copied its content to your PC. Don't use fast format! The formating procedure will take it's time but otherwise you might get problems with installation and/or battery consumption.
If you haven't read it until now, here's a link to mengfeis superb HOWTO (don't forget hitting his thanks button ):
http://forum.xda-developers.com/showpost.php?p=31414628&postcount=1
Have fun
Getrid …
TitaniumBackup (TB)
Hacker4748 said:
Is there a way to move from a working SD build to this NativeSD build without losing everything? I imagine it can be done with TitaniumBackup
Click to expand...
Click to collapse
It can be done easily with TitaniumBackup. Keep the working SD build in FAT32 and TB will use this info to restore your apps, data and xml (calls, sms etc).
TB will not restore the icons - some loaders may allow you to backup and restore settings.
Cheers
Tom
Hacker4748 said:
Thank you. I am currently using an SD build, my SD card is FAT32-formatted. Are you saying that all I need to to do is backup everything from the SD card to my PC, repartition to FAT32 + EXT4, copy back to the FAT32 and install the NativeSD build to the EXT4 partition? Will the new NativeSD build use the data from my existing data.ext4 automatically somehow?
.
Click to expand...
Click to collapse
the first part is correct....
the native sd is like a new rom..it will not touch your apps from the fat32 part of old rom...you need to install apps again on the native sd rom ..you can use titanium backup on your old sd rom, and install them all on your new NSD rom using Titanium backup (fat 32 part is shared folders for both builds..so camera pics or wallpapers from zedge and like are shared on both builds)
Thanks to all.
pakure said:
the first part is correct....
the native sd is like a new rom..it will not touch your apps from the fat32 part of old rom...you need to install apps again on the native sd rom ..you can use titanium backup on your old sd rom, and install them all on your new NSD rom using Titanium backup (fat 32 part is shared folders for both builds..so camera pics or wallpapers from zedge and like are shared on both builds)
Click to expand...
Click to collapse
Thank you. So basically, If I understand correctly, the EXT4 partition on the SD card will basically be what the System.ext4 and Data.ext4 files are now and the "Android" or "ICS" folder will not be required anymore. Thus the EXT4 partition should be around 1,5 GB and the rest can be FAT32.
It is recommended to use a fresh Data.ext4 for installation (or to let the system create one from scratch) and not the existing one from my currently used SD build.
To backup and restore TitaniumBackup is recommended.
Anything I am missing?
Thanks again very much.
Yes...
Ext4 of the native sd works similar to data.IMG file.. of old sd build method.
Try it and you will understand yourself
Sent from my HTC HD2 using Tapatalk 2
Migrate SD install to NativeSD
I have the same question but can't quite relate the answers to what I have on my memory card. I have a (mostly) working copy of 2.3.7 that I've been using for some time, but often have problems after connecting the phone to a computer - sometimes files added to the SD fat32 partition don't show up, or my ringtone on the SD doesn't work or .... So I was also wondering whether rather than install a fresh setup on NativeSD and reload all the apps (tried twice with 4.x versions and neither are happy) I could just move my SD install to NativeSD.
In the /Android folder I have kernel files, the large data filesystem, a smaller system one and some other stuff. Under /NativeSD I also have some kernel files and 2 folders, one for each attempt at a NativeSD install. I understand some of what's in startup.txt but it doesn't appear to be enough. I guess there must be things in the SD builds which tell the phone where to find data and system which would need changing? Is this possible?
Thanks
Moving from SD to NativeSD
Hacker4748 said:
Thanks to all.
Thank you. So basically, If I understand correctly, the EXT4 partition on the SD card will basically be what the System.ext4 and Data.ext4 files are now and the "Android" or "ICS" folder will not be required anymore. Thus the EXT4 partition should be around 1,5 GB and the rest can be FAT32.
It is recommended to use a fresh Data.ext4 for installation (or to let the system create one from scratch) and not the existing one from my currently used SD build.
To backup and restore TitaniumBackup is recommended.
Anything I am missing?
Thanks again very much.
Click to expand...
Click to collapse
One statement is not correct: you WILL have to have an "Android" folder as it holds a data folder for many apps. Also you may want to read through my lengthy posts in the [GUIDE] NativeSD for Windows Mobile (WM6.5) New Users that I wrote (good info even for non WM NativeSD users).
Your statement "It is recommended to use a fresh Data.ext4 for installation" does not make sense for NativeSD. You can keep your current SD build and still use it. For NativeSD, the EXT4 Partition has a folder for data. That is why NativeSD is faster - it uses the SD card, rather than a file.
Cheers
Tom
Szczepanik said:
One statement is not correct: you WILL have to have an "Android" folder as it holds a data folder for many apps. Also you may want to read through my lengthy posts in the [GUIDE] NativeSD for Windows Mobile (WM6.5) New Users that I wrote (good info even for non WM NativeSD users).
Your statement "It is recommended to use a fresh Data.ext4 for installation" does not make sense for NativeSD. You can keep your current SD build and still use it. For NativeSD, the EXT4 Partition has a folder for data. That is why NativeSD is faster - it uses the SD card, rather than a file.
Cheers
Tom
Click to expand...
Click to collapse
Useful guide - thanks - but the question remains - is it possible to move/copy an SD install to run from a NativeSD partition. I can see the folder in the ext4 partition named after the install, and the data and system folders in that. I can extract the data and system files from /Android into those easy enough. Question is, what to call the folder, and how to make the bootloader use it? Do I just move the kernel files to the NativeSD folder? What goes in startup.txt?
I've tried mr-evil1's EvoHD2 V10 but had the problem of it losing then re-detecting the sim card and needing a reboot. Thought it was a bit slow too even though it was on a Class 10 16 GB Samsung MicroSD card. That's why I'm wondering if I can just move my Gingerbread install across.
Thanks
NativeSD
MrSoapsud said:
Useful guide - thanks - but the question remains - is it possible to move/copy an SD install to run from a NativeSD partition. I can see the folder in the ext4 partition named after the install, and the data and system folders in that. I can extract the data and system files from /Android into those easy enough. Question is, what to call the folder, and how to make the bootloader use it? Do I just move the kernel files to the NativeSD folder? What goes in startup.txt?
I've tried mr-evil1's EvoHD2 V10 but had the problem of it losing then re-detecting the sim card and needing a reboot. Thought it was a bit slow too even though it was on a Class 10 16 GB Samsung MicroSD card. That's why I'm wondering if I can just move my Gingerbread install across.
Thanks
Click to expand...
Click to collapse
MrSoapsud - it is not easy to move/copy an SD install to run from a NativeSD partition. You can find more information in the threads linked in my guide, in particular:
Howto port NAND to NativeSD | Step-by-Step
How is the NativeSD ROM work?
The easiest is to backup your apps and data (e.g. Titanium Backup), flash the new NativeSD ROM and then restore your apps. I would recommend Xylographs PACman or one of Tytung ROMs:
[13-NOV-2012][ROM][JB][4.1.2] PACman HD2 v1.2a [PA/AOKP/CM10][NativeSD][WIP]
[Nov. 18, 2012][ROM][720p] NexusHD2-ICS-4.0.4-CM9-HWA V2.8 [NativeSD]
[3.Nov.2012][ROM] NexusHD2-JellyBean-4.1.2-CM10 V1.2 [NativeSD]
Cheers
Tom
OK - thanks again. Will take a look at that stuff and/or try one of those other ROMs.
Szczepanik said:
MrSoapsud - it is not easy to move/copy an SD install to run from a NativeSD partition. You can find more information in the threads linked in my guide, in particular:
Howto port NAND to NativeSD | Step-by-Step
How is the NativeSD ROM work?
The easiest is to backup your apps and data (e.g. Titanium Backup), flash the new NativeSD ROM and then restore your apps. I would recommend Xylographs PACman or one of Tytung ROMs:
[13-NOV-2012][ROM][JB][4.1.2] PACman HD2 v1.2a [PA/AOKP/CM10][NativeSD][WIP]
[Nov. 18, 2012][ROM][720p] NexusHD2-ICS-4.0.4-CM9-HWA V2.8 [NativeSD]
[3.Nov.2012][ROM] NexusHD2-JellyBean-4.1.2-CM10 V1.2 [NativeSD]
Cheers
Tom
Click to expand...
Click to collapse
Tried the 4.0.4 one but found it too slow to be usable. Then found a NativeSD version of the AmeriCanAndroid 2.3.7 release I'd been using before so installed that and added my apps back. Speed and usability are good. Do any of the 4.1.2 ports run at an acceptable speed on the good old HD2?
Thanks
Martin
MrSoapsud said:
Tried the 4.0.4 one but found it too slow to be usable. Then found a NativeSD version of the AmeriCanAndroid 2.3.7 release I'd been using before so installed that and added my apps back. Speed and usability are good. Do any of the 4.1.2 ports run at an acceptable speed on the good old HD2?
Thanks
Martin
Click to expand...
Click to collapse
My experience is, all speed and comfort of NativeSD depend on your sd card.
If you have card with good random r/w speed then you just need to test which custom roms fits you.
If you have card with bad slow random r/w speed(not class, normal speeed etc) then my advice is do alot xda and internet search for fast sd card with good random r/w. When you find good sd card allways try to buy exact model, cause even small difference in model number makes big difference in random r/w.
Atm sd card manufacturers doesnt provide full info about speeed except normal read and write so expect alot time energy spend on research.
Htc hd2 how is getting older he will need more and more investment and sd card will be crucial one.
Sent from my HD2 using xda premium

Set-up micdoSD for Android Partition ext3 - Help Pleease.

Hi,
how are you today? For me good, thanks for asking, ha ha ha hanb
It's alredy my second thread for today, all problems, wow.
So I will try to explain, like in the thread before, I got HTC HD2 and I have Mdeejay eVo on my sd card and I launch Android from WM6.5.
The Android which I use have already the data_1024 folder, inside data.IMG file which it use for storage the Androids apps, but from my research I find the news to some how edit my microsd card and set-up a Partition which be the sobstitute of the data_1024.
I will be glad to know HOW?
Like I said, I got my Android on sd and I try for a week to find the solution with no success, I try to make a ext3 partition on sd of 2048mb but the android do not see that partition. I can't flash anything because on my ROM is WM 6.5.
I also will be glad to make another data_2048 folder with inside data.IMG file, if the Partition can't be done.
Please guys let me know how do I have set-up the partition for the Android?
Thanks.
hmmm not really sure here, but you can make a back up of your SD card then use minitool partition to partition & create EXt3/ Ext 4 / Fat 32 partitions, try the links below they might help
mengfei said:
hmmm not really sure here, but you can make a back up of your SD card then use minitool partition to partition & create EXt3/ Ext 4 / Fat 32 partitions, try the links below they might help
Click to expand...
Click to collapse
before post here I already saw your thread and like I said I do not have MALGDR on my phone or CWM, also I don't know which type of partition need my Android but I am sure is not the last type of Androids which they have the folders; kernel, META-INF, sdcard (inside NativeSD) and system folder. My Android is whit rootfs.img with external data_1024 folder for storage system.
I used Gparted live and I made a partition of 2048mb of ext3 partition but the Android do not see the partition because somehow I can't make a link to it.
I want more storage for my Android and delete data_1024 folder so I try to figure out, with some help, how to do that?
Any ideas?
Use toporesize app on pc to expand your present data img size without losing present data. . To get more space. .No need for ext 3 and all
Search for topo resize
If youwant to use apps 2 sd or link 2sd app from market to use ext 3.. Then you can move apps to sd ... That is for nand installs. . You don't need that on sd builds. ...
You try native sd builds. . Fastest ever.sd builds. . You can boot from wm also . You need ext4 partition for it. ..
sent from my galaxy note 2 (7100)
pakure said:
Use toporesize app on pc to expand your present data img size without losing present data. . To get more space. .No need for ext 3 and all
Search for topo resize
If youwant to use apps 2 sd or link 2sd app from market to use ext 3.. Then you can move apps to sd ... That is for nand installs. . You don't need that on sd builds. ...
You try native sd builds. . Fastest ever.sd builds. . You can boot from wm also . You need ext4 partition for it. ..
sent from my galaxy note 2 (7100)
Click to expand...
Click to collapse
Thanks mate, this is something great!
So I do not need a special partition for my android, good to know.
I know the last Nand Androids are good but I have old phone with old Android and he work fine, I try to put Native SD Android on my sd but too complicated and I do not have so much time. At the moment I find Mdeejay very fast and good, I tryed AmeriCan Android, CM7 and 10 and really I am not comfortable with them like with Mdeejay, so it's ok like that. ! problem solver, I just try to update my kernel - http://forum.xda-developers.com/showthread.php?t=1976835 - and I am ok.
Thanks.
pakure said:
Use toporesize app on pc to expand your present data img size without losing present data. ....
Click to expand...
Click to collapse
End of the Party, Guys, I was happy to soon!
I used toposize to made data.img for my android but I got problems.
If I resize data.img system partition, first of all, I got the error on e2fsck (see the pic) and i have to click ok to compleate the operation and after that I put the data.img into Anrdoid forlder and I replace the original (backups before) but the Android do not turn on, he stuck in HTC Logo.
If I made a clean data.img with ext3 system partition and I replace the data.img into the Android folder, he do not turn on and he stuck in Android logo.
If I use the original data.img from the package the Android turn on normally.
Do I forgot to do something? Do I missing something?
sorry, I forgot the pic.... here we go...
eclyptos said:
sorry, I forgot the pic.... here we go...
Click to expand...
Click to collapse
you are keeping data .img in a folder?...data.img should be in android folder..no further subfolders...and delete that stupid ext3 partition..you dont need it.
try native sd..it is very simple (for you to dual boot with windows mobile):
you need ext4 partition..use minitool partition manager to create it
then put selected rom zip (like pacman hd2 rom..."the best rom") on sd card
put 4ext recovery folder on sd card..open it , click clcrad and haret inside...follow screen instructions to install rom
Reboot and boot the ROM by executing the usual clcrad and haret stuff inside the NativeSD folder.
thats it.
pakure said:
you are keeping data .img in a folder?...data.img should be in android folder..no further subfolders...and delete that stupid ext3 partition..you dont need it.
Click to expand...
Click to collapse
ohh, well, yes, the data.img is in Android folder, not subfolders or external folders, I said so because in my package of Mdeejay are 2 folders, Android and data_1024. The data_1024 is all ready done to make a fast boot instantly but if I do not use it Android make the clean data into his root folder.
About the partition you get confused a little bit because when I used toporesize to made a clean data.img file to use it in android folder, the app ask me in which system the file have to be, ext2, ext3 or NONE. So no 1 of this data.img worked.
I hope I clarifide, I do not have ext3 partition on sd, is the data.img. that's all.
pakure said:
try native sd..it is very simple (for you to dual boot with windows mobile):
you need ext4 partition..use minitool partition manager to create it
then put selected rom zip (like pacman hd2 rom..."the best rom") on sd card
put 4ext recovery folder on sd card..open it , click clcrad and haret inside...follow screen instructions to install rom
Reboot and boot the ROM by executing the usual clcrad and haret stuff inside the NativeSD folder.
thats it.
Click to expand...
Click to collapse
I don't know about that, currently I have a working Android (not jet set-up like I want too) but I will see if I sholud do all this stuff. I am not so deep in this stuuf and just reach when I reach now, get me tired. So I take in the consideration you advice but now I have to have 1 android working well.
Ok, some bad news:
I did in different way to set-up my storage image, I let Android to made a clean data.img into his folder, after he finished installation and start running well I take the data.img of 1GB and with toposize I resize the image to 3GB. Like I said before, he give me this crap error but I really do not understand why? If Android made a clean data.img in his folder which errors can be made?
So I click ok anyway and made this file and I replaced the 1GB with 3GB with unclarifide done error fix.
He works for feew hours, smooth and fast, I start installing appps and games. Like many games they ask for downloading some updated files so I start downloading 450mb for 1 game and after 20 minuts Android crashed and he do not turn on anymore, he stuck in Android logo.
Are you sure this crap "TOPOSIZE" working? or it's just ME?
Guys, please help, I get confused and I don't know how to do it.
Today I also try install on my android Chainfire and i can't install plugins for low storage so after few hours of serching I find this thread http://forum.xda-developers.com/showpost.php?p=16457164&postcount=14723 but after read what they saying I do not understand anymore which system file I have to resize to get more space AND to make working chainfire which I really need right now for few games!
Someone can tell me which files I have to resize? How? or Post the right thread? please.

Categories

Resources