Hi,
Today i flashed with succes my first android rom Hyperdroid GBX v12, Gingerbread 2.3.3
But i missing sense in this rom so i wish an other rom with sense. I started to partitining my sd card but i get scared and flashed the same rom again.
1. can i flash each nand rom from sd card
2. if not is it possible to undo the partitining of th sd card
I'm so glad that i am windows free
arjanbannie said:
Hi,
Today i flashed with succes my first android rom Hyperdroid GBX v12, Gingerbread 2.3.3
But i missing sense in this rom so i wish an other rom with sense. I started to partitining my sd card but i get scared and flashed the same rom again.
1. can i flash each nand rom from sd card
2. if not is it possible to undo the partitining of th sd card
I'm so glad that i am windows free
Click to expand...
Click to collapse
I didn't' get it! What scares you? You should partition your sd if its needed. Some ROMs, especially Sense, required SD Partition. If you skip this part the rom wouldnt boot. And the instalation is from SD!
First of all, don't be scared flashing a ROM. One of the only ways to brick a HD2 is by flashing the wrong radio.
Partitioning the SD card? Just use minitool partition manager or easeus partition manager (both work fine) and then create your Ext3 partition there. Just make sure you have the files on your SD card backed up to your PC as when you're partitioning, it'll need to format the card.
EDIT: to answer your questions...
1) it's only possible to have one android rom installed at one particular time.
2) it is possible to wipe the partition on your sd card to make it full capacity again. Search for 'Panasonic SD Formatter' and that works just fine.
Sent from my GT-I9100 using XDA App
both of you thanks a lot for the quick reaction.
What scares me is that when i put a new rom at my sd card and flash it, is that enough or do i have to delete the old first???
And second, does it mather what kind of rom i flash there are to much to choose i think. i have a european model so i shouldnt choose the tmous models are all other roms save to flash?
What the heck i did it!!!!
No thinking just doing!!!!
but now its hanging on the start up
so back to the first flash who worked is there anyone who knows what i am doing wrong????
You should have enough space to have more than one rom on your SD card. Why it's looping on boot is because you have the wrong clockwork partition. In each rom it should be outlined as to what size you need the partition, then just reflash the right size clockwork from magldr/cLK.
Sent from my GT-I9100 using XDA App
Skellyyy said:
You should have enough space to have more than one rom on your SD card. Why it's looping on boot is because you have the wrong clockwork partition. In each rom it should be outlined as to what size you need the partition, then just reflash the right size clockwork from magldr/cLK.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
do i need the panasonic sd formatter before doing this?
Nope you don't need to do anything to the SD card partition. It's the internal memory you're partitioning to make room for your ROM. Can't remember exactly but you can just edit one of the files that you've got in your clockwork folder to change the partition size or just go to the clockwork thread and download the partition size clockwork you need.
Sent from my GT-I9100 using XDA App
Related
Im just wondering what the best way to change WP7 roms is
should i do a task 29 and reflash everything or can i just flash straight over
also should i format my sd card first and then flash or do i not need to
i want to change roms so the chevrons built in but my current
rom is pretty stable and i dont want to cause any problems
-josh- said:
Im just wondering what the best way to change WP7 roms is
should i do a task 29 and reflash everything or can i just flash straight over
also should i format my sd card first and then flash or do i not need to
i want to change roms so the chevrons built in but my current
rom is pretty stable and i dont want to cause any problems
Click to expand...
Click to collapse
When you flash WP7 it will wipe your SD card. You could try copying the WP7 partition to another SD card if you have one, flash and then delete newly created partition, copy the partition back to the card you are using. Not sure if it will work though and you will need a partition manager like Minitool Partition Manager or Easeus Partition Manager, both are free.
AndHD2 said:
When you flash WP7 it will wipe your SD card. You could try copying the WP7 partition to another SD card if you have one, flash and then delete newly created partition, copy the partition back to the card you are using. Not sure if it will work though and you will need a partition manager like Minitool Partition Manager or Easeus Partition Manager, both are free.
Click to expand...
Click to collapse
thanks for your reply but i realise my memory card will be wiped just wanted to know if i should wipe everything myself to get a clean flash as with windows 6.5 i used to get problems if i didn't use task 29. But if its not needed it would save me alot of time
I just like to know what the best way is to go about things to avoid unnecessary problems as reported by other users
Ok, I've been able to keep up with all the flashing of android on hd2 fairly easy since the beginning almost a year ago. This is the only time I've ever really had a hard time figuring it this thing out.
I have flashed nand miui rom with 250mb partition on my eu hd2 through clockwork recovery. I'm trying to try other builds so I do the same method previously by flashing the zip file on my sd card through clockwork but it always get stuck at "unpacking sdext" files.
Is it because each build require different size partitions? Is it something else? Am I missing a step?
This clockwork stuff is pretty confusing...help is appreciated and thank you all in advanced. Much love.
Yes, different builds do require different partition sizes. A GingerBread build can get by on a 150mb (and possibly less) partition, whereas a Desire HD based build will require a 400mb partition.
so how do i go about doing this? because ive tried to partition my card, but it just erases everything clean even with a backup
mini_robot said:
so how do i go about doing this? because ive tried to partition my card, but it just erases everything clean even with a backup
Click to expand...
Click to collapse
The latest cwm partitions are flashed to your NAND and has nothing to do with partitions on your sd card. The sd card partitions are needed to run certain roms on the EU512 device.
To flash a cwm 1.3 partition, you need magldr 1.13, download the partition size you need, boot to usb flasher in magldr and run the daf.exe file from the download. It will wipe data on your phone NAND memory and should have no impact on data on the sd card.
I already have cwm 1.3 and magldr 1.13. I already flashed miui rom. That means I have to use a computer to flash other Roms as well? I thought the point of cwm is so u can flash and switch between roms without a comp?
or does this mean flash through the computer once and then u can switch between roms? sorry if I'm really dumb
You can (as long as you have the same partition size as is needed). I haven't tried it, but I guess you could install the 400mb partition and that should cover all rom types. The only problem is that you then create a larger partition on NAND than may be needed for some roms thereby reducing the internal memory available.
ClydeB1 said:
You can (as long as you have the same partition size as is needed). I haven't tried it, but I guess you could install the 400mb partition and that should cover all rom types. The only problem is that you then create a larger partition on NAND than may be needed for some roms thereby reducing the internal memory available.
Click to expand...
Click to collapse
ahhhhhh. I think I will try that and report back to see how it goes. thanks so much for your help. I will try to do the same for other people once I figure this out
I'd be interested to know the answer. Good luck....
welps. I have tried with no luck. I actually ruined my 8gb SD card trying it and had to get a new one.
Ive been able to flash the 400mb partition and have been able to flash any rom but like it has already been stated it affects the amount of internal memory available, not too bad for me as i have a tmous
Sent from my HTC HD2 using XDA App
mini_robot said:
welps. I have tried with no luck. I actually ruined my 8gb SD card trying it and had to get a new one.
Click to expand...
Click to collapse
Ok, send me your 8Go SD if you think it's dead
NAND and SD are two different things. For your SD, just delete/recreate the partition and it will be new again.
Explanation I post somewhere else (hope it wll help you to understand):
===
I will try to explain.
I assume you have a non-TMOUS device. So your internal storage (let call it NAND) is 512Mo. This is all what your have.
The CWM xxxMo will be what your allocate for your build.
If you allocate 150 (by flashing CWM 150MB) you will have 512-150=362Mo free.
If you use CWM 400... you will have 112Mo free space.
The build you want to use take a little bit more than 100Mo. So why using CWM400 to fill it with only 100Mo???
You have to use the smallest CWM to put your build in it. This will give you the more storage space after installing the build.
Don't think the more "CWM" you will use the more space you will have. It's exacly the opposite.
Hope you understand. Please take into account that the figures I give are appoximation. Don't complain if instead of 362Mo you have only 300... it's more than enough anyway for most of us.
===
So if your first NAND needed a small partition only, you may have to flash again CWM with another partition setting (for ex a 400Mo to fit a desire HD NAND).
Go on the CWM thread to find the version you need (150, 250 and 400 are available). Some thread are also available to modify the config file to make the partition size you want.
By using the 400Mo most build will be flashable... but you will have very little free space and will have to use your SD card (APP2SD or other soft).
I prefer to put everything in NAND for two reasons:
1/ I can remove my SD when I want
2/ I think it's better for battery consumption to not use the SD (but this I don't know, it's just what I think).
i was able to recover the sd card (thanks). anddddd i was able to kind of, sort of, dual boot, two different builds except that one of them has force close issues constantly.
mini_robot said:
i was able to recover the sd card (thanks). anddddd i was able to kind of, sort of, dual boot, two different builds except that one of them has force close issues constantly.
Click to expand...
Click to collapse
What are you talking about? You can't dual boot with clockwork
Sent from my HTC HD2 using XDA App
dung8604 said:
What are you talking about? You can't dual boot with clockwork
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
well its not dual booting. i just kind of re-install each build from clockwork.
I have Hyperdroid with CNM 7 and a2sd+ partitioned SD card.
My question to you guys is..
Is it safe to flash another Android Rom with a2sd+ on my existing one?
Or do i need to flash my Card with Panasonic SD Format and make a new partition?
Whats the best a2sd+ ROM in your opinion?
Sorry if might this had posted before..it's just a quick question
Regards,
Arkatis
arkatis said:
I have Hyperdroid with CNM 7 and a2sd+ partitioned SD card.
My question to you guys is..
Is it safe to flash another Android Rom with a2sd+ on my existing one?
Or do i need to flash my Card with Panasonic SD Format and make a new partition?
Whats the best a2sd+ ROM in your opinion?
Sorry if might this had posted before..it's just a quick question
Regards,
Arkatis
Click to expand...
Click to collapse
Hi,
The ext2/3/4/ partition does not get changed when you flash a new ROM.
You should be fine to flash a new ROM over your old one.
Don't forget to backup your data and when you go into MAGLDR wipe data,cache partition,and dalvik(in advanced).
Each ROM comes with its own CWM partition to flash in recovery.Do this, then flash your new ROM...
As for which ROM to choose,Imilka does a nice line in A2SD ROMS.
(Please remember,that this is only MY opinion)
Check here:
http://android.hd2roms.com/
That was very helpful man! Cheers!
If you're coming from a different ROM then you should do a back up using titanium backup before installing new ROM. It's highly possible it will have conflicts. Install app2sd when you close to run out space in your internal memory. Say, when you install a NAND ROM everything goes into your internal memory and whatever left should be use mostly before installing app2sd. Installing app2sd will take 195Mb from SD card and stop using your remaining space in internal memory.
Hi guys,
I've installed a CM7 ROM then installed S2E, then flashed an AOSP build to replace it. When I try to use S2E to move the apps back to NAND from sd-ext, it shows up in NAND in the first couple of boots, but later on goes back to sd-ext without S2E doing the job. I kinda figured that it's built into the ROM to move the apps to sd-ext.
What would be the safest way to move the apps from sd-ext back to /data/app, and then repartition my SD card into a single partition and use its whole storage capacity?
Thanks in advance!
ejebyte said:
Hi guys,
I've installed a CM7 ROM then installed S2E, then flashed an AOSP build to replace it. When I try to use S2E to move the apps back to NAND from sd-ext, it shows up in NAND in the first couple of boots, but later on goes back to sd-ext without S2E doing the job. I kinda figured that it's built into the ROM to move the apps to sd-ext.
What would be the safest way to move the apps from sd-ext back to /data/app, and then repartition my SD card into a single partition and use its whole storage capacity?
Thanks in advance!
Click to expand...
Click to collapse
try link2sd in the market,it's free,but once you've moved all u want to,boot into recovery and wipe cache partition and wipe dalvik,that MIGHT do the trick
one question, how do you want to partition your sd? i mean one fat or one ext partition? But seriously, one partition is a bad idea, i wouldnt recommend that.
@Ty5982, Thanks for the input! Will try that later.
@greg17477, I'm using Windows so I want to format it to a single Fat32 partition. What's your recommendation?
Partition ur sd card in recovery with 1gb and swap size 64mb,THEN,open link2sd and when u 1st open it,it checks your phone and sd card then prompts u were u want to send apps to,ext 2,3,4 or FAT 32,select FAT 32 as its what u want,then a error msg will appear,reboot,then open link2sd and now you've got your fat 32 lol
Sent from my HTC Sensation XL with Beats Audio X315e using xda premium
Ty5982 said:
Partition ur sd card in recovery with 1gb and swap size 64mb,THEN,open link2sd and when u 1st open it,it checks your phone and sd card then prompts u were u want to send apps to,ext 2,3,4 or FAT 32,select FAT 32 as its what u want,then a error msg will appear,reboot,then open link2sd and now you've got your fat 32 lol
Sent from my HTC Sensation XL with Beats Audio X315e using xda premium
Click to expand...
Click to collapse
Won't that have moved his apps to a fat32 partition?
If I'm reading this correctly what the OP wants is to move his apps to NAND so he can format his sd card to its full capacity in FAT32, presumably so he can use it as a normal SD card (eg for a camera, moving files etc)
I personally use a very popular app called DarkTremors Apps2SD GUI, it comes preinstalled on a lot of custom ROMS. This app checks where your apps are when you launch it, and gives you the option to either move them to SD-EXT or back again. Launch APPS2SDGUI, let it check your system, then click 'Apps are on SD!' to move them back to NAND.
P.S. I don't think you can wipe the SD-EXT partition off the SD card using Windows' built-in formatter. There are lots of freeware apps that can and will do this though, google is your friend =]
jwchips said:
Won't that have moved his apps to a fat32 partition?
If I'm reading this correctly what the OP wants is to move his apps to NAND so he can format his sd card to its full capacity in FAT32, presumably so he can use it as a normal SD card (eg for a camera, moving files etc)
I personally use a very popular app called DarkTremors Apps2SD GUI, it comes preinstalled on a lot of custom ROMS. This app checks where your apps are when you launch it, and gives you the option to either move them to SD-EXT or back again. Launch APPS2SDGUI, let it check your system, then click 'Apps are on SD!' to move them back to NAND.
P.S. I don't think you can wipe the SD-EXT partition off the SD card using Windows' built-in formatter. There are lots of freeware apps that can and will do this though, google is your friend =]
Click to expand...
Click to collapse
@Ty5982, unfortunately it didn't work. It went badly and I lost the apps in sd-ext so I ended up restoring them..
@jwchips, thanks! Will try that one instead. Yep, I've read about the tools/apps that can be used to partition/format storage devices with EXT. Thanks again.
ejebyte said:
@Ty5982, Thanks for the input! Will try that later.
@greg17477, I'm using Windows so I want to format it to a single Fat32 partition. What's your recommendation?
Click to expand...
Click to collapse
well i would recommend tu have 2 partitions, ext and fat. Just to be safe or prapared in case your want to try a different rom. Nowadayes almost every rom uses ext partition. And you won't run out of space, if you install some more apps.
greg17477 said:
well i would recommend tu have 2 partitions, ext and fat. Just to be safe or prapared in case your want to try a different rom. Nowadayes almost every rom uses ext partition. And you won't run out of space, if you install some more apps.
Click to expand...
Click to collapse
I see. Thanks! Currently I have a 512MB EXT partition on my SD card. I thought I'd be able to choose which apps to move there but it seems my ROM automatically symlinks the apps installed to the EXT partition.
So I decided I want to just install the apps to NAND since I don't really install a lot of apps and I'm using a TMOUS HD2, just for an extra boost in performance compared to when apps are installed to SD-EXT. Then I'll just selectively move apps to SD.
ejebyte said:
I see. Thanks! Currently I have a 512MB EXT partition on my SD card. I thought I'd be able to choose which apps to move there but it seems my ROM automatically symlinks the apps installed to the EXT partition.
So I decided I want to just install the apps to NAND since I don't really install a lot of apps and I'm using a TMOUS HD2, just for an extra boost in performance compared to when apps are installed to SD-EXT. Then I'll just selectively move apps to SD.
Click to expand...
Click to collapse
ah ok, on TMOUS HD2 you might do not need an ext partition
greg17477 said:
ah ok, on TMOUS HD2 you might do not need an ext partition
Click to expand...
Click to collapse
That's what I've figured..
I might just back-up everything then re-flash and repartition my phone and SD card. Anyway, thanks everyone!
ejebyte said:
That's what I've figured..
I might just back-up everything then re-flash and repartition my phone and SD card. Anyway, thanks everyone!
Click to expand...
Click to collapse
Hi, I hope you guys are still around, I´ve been looking for an answer and can´t find anything, heres the question I posted on another thread:
I´ve been having trouble with my phone freezing even after full wipes, so I´ve come to the conclusion my sdcard is corrupt.
So I want to go through the Gparted process to format and re-partition my sdcard.
Currently I have 16GB class 6, which has the recommended FAT32 and 1GB ext4.
Is it safe (or even possible) to format the sd card now. I tried with Gparted and only the FAT32 partition showed up???
The rom is runnymede aio which requires the ext4
Thanks
colinmc8 said:
Hi, I hope you guys are still around, I´ve been looking for an answer and can´t find anything, heres the question I posted on another thread:
I´ve been having trouble with my phone freezing even after full wipes, so I´ve come to the conclusion my sdcard is corrupt.
So I want to go through the Gparted process to format and re-partition my sdcard.
Currently I have 16GB class 6, which has the recommended FAT32 and 1GB ext4.
Is it safe (or even possible) to format the sd card now. I tried with Gparted and only the FAT32 partition showed up???
The rom is runnymede aio which requires the ext4
Thanks
Click to expand...
Click to collapse
be sure to format both partitions as primary.
Hi there,
I successfully flashed an Android 4.2.1 Native SD ROM on the HD2's NAND (TimeJelly). This is the procedure I followed (coming from a complete erase of the phone's NAND, as the result of a failed previous attempt, lol):
Flashed HSPL 2.08
Flashed Radio compatible with 576 MB of ram (12.xx.50.xx if I recall correctly)
Flashed MAGDLR 1.13
Flashed CWM 6.0
Flashed the ROM from CWM by choosing zip from sd card.
And everything is good and working. But, I used one friend's SD to flash (since I still don't have one)... Now, I'd like to swap out the SD I used to flash (I understand it did automatically create an Ext4 partition on it?) and use the one I'll buy tomorrow.
What do I have to do? Without the SD the phone will just refuse to boot, stucking at the green HTC logo. Do I just have to partition the new SD from CWM? Do I have to flash everything again? (Jeeeeez).
I understand the EXT4 partition would be used only for the data, since it is stated Data2Ext in the ROM's title. ROM is in the NAND with DATA2EXT (the exact option I chose during installation, second one).
Any help will be GREATLY appreciated
4l3xXx said:
Hi there,
I successfully flashed an Android 4.2.1 Native SD ROM on the HD2's NAND (TimeJelly). This is the procedure I followed (coming from a complete erase of the phone's NAND, as the result of a failed previous attempt, lol):
Flashed HSPL 2.08
Flashed Radio compatible with 576 MB of ram (12.xx.50.xx if I recall correctly)
Flashed MAGDLR 1.13
Flashed CWM 6.0
Flashed the ROM from CWM by choosing zip from sd card.
And everything is good and working. But, I used one friend's SD to flash (since I still don't have one)... Now, I'd like to swap out the SD I used to flash (I understand it did automatically create an Ext4 partition on it?) and use the one I'll buy tomorrow.
What do I have to do? Without the SD the phone will just refuse to boot, stucking at the green HTC logo. Do I just have to partition the new SD from CWM? Do I have to flash everything again? (Jeeeeez).
I understand the EXT4 partition would be used only for the data, since it is stated Data2Ext in the ROM's title. ROM is in the NAND with DATA2EXT (the exact option I chose during installation, second one).
Any help will be GREATLY appreciated
Click to expand...
Click to collapse
If I understand correctly you want to move your sd content/installation to a new card, yes?
Go to the sd card thread in my signature and read post # 2. Specifically the part about backing up and restoring an sd card image.
---
If you choke a smurf, what color does it turn? (via Tapatalk)
NYLimited said:
If I understand correctly you want to move your sd content/installation to a new card, yes?
Go to the sd card thread in my signature and read post # 2. Specifically the part about backing up and restoring an sd card image.
---
If you choke a smurf, what color does it turn? (via Tapatalk)
Click to expand...
Click to collapse
Nono, I just installed a native sd ROM on the phone's NAND, and now it will simply not boot without an EXT4 formatted SD (because the /data partition is there, not on the NAND).
I repartitioned the SD from CWM this morning choosing 2 GB of EXT partition, and 2 GB of FAT32 partition, and everything is working. But, there's another problem. Whenever I reboot the phone, it will simply lose EVERY single setting, and it prompts me again to choose the language, google accounts ecc...
Any help?
4l3xXx said:
Nono, I just installed a native sd ROM on the phone's NAND,
Click to expand...
Click to collapse
no you didnt, , a nativeSD rom lives in the EXT partition, If you installed a rom to nand, then its a nand rom. If you install it to teh FAT partition, its an SD rom, if you install it to the sd-ext, its a nativeSD rom.
I understand it did automatically create an Ext4 partition on it?
Click to expand...
Click to collapse
no, you must create the ext partitions yourself.
Sounds to me like you have a nand rom, which is also using dataonext, , meaning teh rom lives on Nand, and the data partition is mounted onto the sd-ext, , in which case.....
into CWM - full backup
new sd card into phone
into cwm - create ext partition on new sd card
in cwm - selectively restore ONLY the sd-ext partition (you will need to have coppied over the fat32/clockwork/backups folder from the old card to teh new card)
reboot.
samsamuel said:
into CWM - full backup
new sd card into phone
into cwm - create ext partition on new sd card
in cwm - selectively restore ONLY the sd-ext partition (you will need to have coppied over the fat32/clockwork/backups folder from the old card to teh new card)
reboot.
Click to expand...
Click to collapse
The SD card image backup would, essentially, duplicate a card in entirety, all partitions included.
---
If you choke a smurf, what color does it turn? (via Tapatalk)
NYLimited said:
The SD card image backup would, essentially, duplicate a card in entirety, all partitions included.
Click to expand...
Click to collapse
i didn't say anything about an sd card backup, i said do a full cwm backup, which includes the system, data, boot and sd ext partitions, and not the fat32 partition, and then restore only the sdext partition to the new card (after of course creating teh new ext partition on teh new card)
edit