Related
Hi.
After getting my HD2 last week I tentatively but successfully flashed my first ROM, which was the Rafdroid 4.0.2.
I had correct radio.
I installed HSPL 2.08.
I installed MAGLDR 1.13
I got the Rafdroid ZIP file
Prepared SD card with Primary Partition and 1GB ext3 partition.
Downloaded the 400MB CWM partition and flashed to HD2
Then installed the Rafdroid Zip from SD card via CWM.
Everything seemed to go fine and I've been using the Rafdroid for a week. But now I want to try a new ROM, specifically the NexusHD2-Gingerbread V2.7 ROM.
Now I'am a bit unsure on how best to proceed still being new to the world of NAND. A few things in the Nexus ROM thread confuse me.
Installing CWM_Recovery_for_NexusHD2 (135MB system and 2MB cache)
Does this mean I need to reflash to CWM partiton size 1.3v 150MB? I'm unsure what the 2MB cache means.
Enter ClockworkMod Recovery when you're on MAGLDR 1.13 (hold "Power" button during boot) and select "AD Recovery" or "Boot AD SD" (if ever copied CWM's initrd.gz and zImage to SD).
The first part of this I understand but I don't know what the bold bit is. Do I need to copy these files to my sd card? I didn't do anything like this when I flashed Rafdoid.
Thanks for your time. Hopefully a few pointers can get me on my way
Yes, reflash cwm but with a different partition layout.
(look in cwm folder find flash.cfg, open it in notepad, you will see the numbers to change)
The bit in bold - ignore that, there are two types of cwm, one that installs to the nand, like you have, and one that runs from sd, so ignore the sd bit.
So,
Into magldr,,
usb flashing,,,
flash the new layout with the sizes the rom suggests, (you can tinker with your own sizes as you get used to changing, it's the system size that is important, a few meg bigger than the unzipped size of the system folder in the rom.zip)
When that completes, back into magldr,
Ad recovery (option 8 I think) to boot cwm, and flash the rom.
You can set the system size to what you like, so long as it is bigger than the roms system folder, but anything over is wasted, it doesn't count towards internal storage, so if the rom says 135 and you flash 150 layout, there is 15meg wasted space. (that being said, 150 is a good size to use, since quite a few roms use that or smaller,, sense free roms will mostly all fit in 150 layouts,) meaning you can switch between them without flashing cwm again. Also means you can restore cwm backups from any of them into that layout, so you can set one up, take backup, flash another, take backup, flash a third, then any time restore either of the backups.
Use flash.cfg to change partition.. Btw. I read in NexusHD rom topic you need to flash 135MB system and 2MB cache.
About the second problem:
Just make sure you have zipped rom on your sd card, enter MAGLDR, select AD Recovery and flash zip.
I think the second way is possible if you manually copy those files, never tried it.
Hi Sam and volv.
Many thanks for taking the time to answer my queries!
Should I get rid of the Rafdroid sd card layout and just re format the card to FAT32? I don't think I'll be going back to it.
Another thing about the backup - where are they stored - in the NAND memory or on the sd card for loading back into NAND?
Everything else you've posted has been very clear and super helpful. I'll definitely be a lot more confident at flashing the ROM tomorrow!
Thank you.
Warren_Orange said:
Hi Sam and volv.
Many thanks for taking the time to answer my queries!
Should I get rid of the Rafdroid sd card layout and just re format the card to FAT32? I don't think I'll be going back to it.
Another thing about the backup - where are they stored - in the NAND memory or on the sd card for loading back into NAND?
Everything else you've posted has been very clear and super helpful. I'll definitely be a lot more confident at flashing the ROM tomorrow!
Thank you.
Click to expand...
Click to collapse
Hi,
Before starting anything,BACKUP YOUR STUFF.
Go to ad recovery>backup and restore and make a backup of your current system and data.This is stored on your sd card in clockworkmod/backup.
Next ,flash your new partition.
Then go to ad recovery and wipe data,cache partition,and dalvik(advanced)
Then go back and choose install zip from sd card(having placed your new ROM zip on the root of your sd card using a card reader)
Most roms support using the ext partition, so definitely keep it.
Before you flash, in cwm, do a 'wipe data/factory reset','wipe cache', and then 'advanced - wipe dalvik cache'. This will clear out the data and such from the previous rom, so no need to format it. (there may be some leftover folders from certain apps in the fat32 partition, you can manually delete them as and if necessary, shouldnt cause any problems)
backups get saved to the sd card, in a folder called clockwork, so be sure and back that up if you plan on formatting your sd card.
Hi again.
I just want to say the flash went like clockwork (no pun intended ) The NexusHD ROM has a really nice feel to it. Its my first taste of stock Android and I like it.
I was going to sell the HD2 and keep my old Hero, but I'm not so sure now after trying NEXUS HD ROM.
Hmmn decisions decisions.
Once again thanks for all your help. It definitely filled in the missing blanks.
Ta Ta
you can use every flash.cfg and change the values to the needet. Run the flash tool and after that flash the zip via recovery
Im kinda new to this but i have been reading & trying for a few days before asking for help but i feel i am stuck now.
I have gone through the process & installed a small rom with clockworkmod using a 150mb partition & it went ok.
Now i want to install a larger rom eg. pyramid_HTC_WWE_1.35.401.1_v1.5_EU.zip (338mb) using clockworkmod & this is where i have the problem, i have followed the steps but when installing the rom it freezes just under halfway install.
Using bootloader I have now used Task29 for a clean install, then installed MAGLDR113, using MAGLDR i used option 5 (USB flasher) & installed the unzipped () to make a partition for the larger rom.
After reboot i went to magldr option 8.AD Recovery & loaded clockworkmod, advanced then partition SD card, chose EXT size=1024, swap size=0M then rebooty.
Now am i supposed to see 4 partitionson my SD card because i cant?
one page i read that i should now transfer my ROM.zip to my Sd card, & i also read on another page that i should go to "mounts & storage" & chose "format sd-ext" I have tried both ways!
With the rom.zip on my card, i chose the "install zip from sdcard" option etc, it installs to just under half way then just stays there for ages, how long should this take for a 338mb zip file?
So i giveup, battery out & try it with a smaller zip (hyperdroid-cm7) 69mb zip & it installs ok, so where am i goin wrong??
Q1, after partitioning the SD card am i supposed to see 4 partitions on the card? because i dont, maybe i should partition it on my pc, do i just divide it into 4 partitions & name then ext, ext1, ext2, ext3? or is there a guide for doin it on ur pc?
Q2.can anyone see where else i might be going wrong?
I feel i am just doin the same thing over & over so thanks for any help you can give.
Something strange i have noticed that if i use the HD2 toolkit to try & create a 400mb partition i get an error sayin something about not enough space, i have to use a seperate Recovery_400M.zip that i downloaded from the NFEUMAN pages?
first of all your sd card patition is right. you must have 2 partitions, fat 32 and sd-ext. now in hd2 nand tool kit choose mgldr partition size as 'custom' then cache size 5MB then click repartition in usb flasher mode then write 190 in the opening window not 400. that's all.
I have managed to get the rom to bootup now after waiting for ages, but when booted it says the memory is low so im guessing its not using the SD card, when i look at the SD card i do not see any partitions so the partitioning tool in clockworkmod hasnt worked, is there a better way to partition the SD card for use with the rom?
you can see the partition in your sd by root explorer apk. or you can dowload to your pc mini tool partition magic an you can manage your partitions. windows doesn't see it.
Theres no mention when partitioning your SD card that you wont be able to see the partitions, i think they should mention that in the tutorials.
I downloaded gparted to partition my SD card & when i loaded it i could see that it had in fact worked when i had done it before.
I installed Apps2SD+ to see if it would sort out the low memory problem but the phone wouldnt boot, i waited 20 mins but it just stayed at the strtup screen.
I am doin it over again now with the partition size you suggested so hopefully this will work, should this allow more space for apps with this partition size?
i used the rom you try to use a few days ago. you dont have to install apps2sd etc. the rom just do that. so wipe everything and flash the rom, you will not face any room problem. to free some ram,you can use built in task manager or a task killer.
Hey mutil i have reinstalled the rom & it seems to be working great, but how do i use apps2SD? when i install new apps will they automaticly be installed to the SD card now, or do i have to chose the options somehow? thx.
yes they will go directly to sd-ext. if some applications like angry birds give force close error then get titanium backup from market, find the app that gives errorin titanium, long press on the app then choose 'move to sd'.
mutil thx for that advise. i just wanna ask you, before you installed the rom, what size clockwork mod recovery partition did you use? I used 190 as suggested above, but now reading back through the thread i see you can use a 170mb partition. Is it would be worth me doing it again as a 170mb partition, would i get any benifit do you think?
It doesn't worth to make a new partition. There will not be a great difference. Good luck.
Sent from my HTC HD2 using XDA Premium App
Hi,
Today i flashed with succes my first android rom Hyperdroid GBX v12, Gingerbread 2.3.3
But i missing sense in this rom so i wish an other rom with sense. I started to partitining my sd card but i get scared and flashed the same rom again.
1. can i flash each nand rom from sd card
2. if not is it possible to undo the partitining of th sd card
I'm so glad that i am windows free
arjanbannie said:
Hi,
Today i flashed with succes my first android rom Hyperdroid GBX v12, Gingerbread 2.3.3
But i missing sense in this rom so i wish an other rom with sense. I started to partitining my sd card but i get scared and flashed the same rom again.
1. can i flash each nand rom from sd card
2. if not is it possible to undo the partitining of th sd card
I'm so glad that i am windows free
Click to expand...
Click to collapse
I didn't' get it! What scares you? You should partition your sd if its needed. Some ROMs, especially Sense, required SD Partition. If you skip this part the rom wouldnt boot. And the instalation is from SD!
First of all, don't be scared flashing a ROM. One of the only ways to brick a HD2 is by flashing the wrong radio.
Partitioning the SD card? Just use minitool partition manager or easeus partition manager (both work fine) and then create your Ext3 partition there. Just make sure you have the files on your SD card backed up to your PC as when you're partitioning, it'll need to format the card.
EDIT: to answer your questions...
1) it's only possible to have one android rom installed at one particular time.
2) it is possible to wipe the partition on your sd card to make it full capacity again. Search for 'Panasonic SD Formatter' and that works just fine.
Sent from my GT-I9100 using XDA App
both of you thanks a lot for the quick reaction.
What scares me is that when i put a new rom at my sd card and flash it, is that enough or do i have to delete the old first???
And second, does it mather what kind of rom i flash there are to much to choose i think. i have a european model so i shouldnt choose the tmous models are all other roms save to flash?
What the heck i did it!!!!
No thinking just doing!!!!
but now its hanging on the start up
so back to the first flash who worked is there anyone who knows what i am doing wrong????
You should have enough space to have more than one rom on your SD card. Why it's looping on boot is because you have the wrong clockwork partition. In each rom it should be outlined as to what size you need the partition, then just reflash the right size clockwork from magldr/cLK.
Sent from my GT-I9100 using XDA App
Skellyyy said:
You should have enough space to have more than one rom on your SD card. Why it's looping on boot is because you have the wrong clockwork partition. In each rom it should be outlined as to what size you need the partition, then just reflash the right size clockwork from magldr/cLK.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
do i need the panasonic sd formatter before doing this?
Nope you don't need to do anything to the SD card partition. It's the internal memory you're partitioning to make room for your ROM. Can't remember exactly but you can just edit one of the files that you've got in your clockwork folder to change the partition size or just go to the clockwork thread and download the partition size clockwork you need.
Sent from my GT-I9100 using XDA App
Hi guys,
I've installed a CM7 ROM then installed S2E, then flashed an AOSP build to replace it. When I try to use S2E to move the apps back to NAND from sd-ext, it shows up in NAND in the first couple of boots, but later on goes back to sd-ext without S2E doing the job. I kinda figured that it's built into the ROM to move the apps to sd-ext.
What would be the safest way to move the apps from sd-ext back to /data/app, and then repartition my SD card into a single partition and use its whole storage capacity?
Thanks in advance!
ejebyte said:
Hi guys,
I've installed a CM7 ROM then installed S2E, then flashed an AOSP build to replace it. When I try to use S2E to move the apps back to NAND from sd-ext, it shows up in NAND in the first couple of boots, but later on goes back to sd-ext without S2E doing the job. I kinda figured that it's built into the ROM to move the apps to sd-ext.
What would be the safest way to move the apps from sd-ext back to /data/app, and then repartition my SD card into a single partition and use its whole storage capacity?
Thanks in advance!
Click to expand...
Click to collapse
try link2sd in the market,it's free,but once you've moved all u want to,boot into recovery and wipe cache partition and wipe dalvik,that MIGHT do the trick
one question, how do you want to partition your sd? i mean one fat or one ext partition? But seriously, one partition is a bad idea, i wouldnt recommend that.
@Ty5982, Thanks for the input! Will try that later.
@greg17477, I'm using Windows so I want to format it to a single Fat32 partition. What's your recommendation?
Partition ur sd card in recovery with 1gb and swap size 64mb,THEN,open link2sd and when u 1st open it,it checks your phone and sd card then prompts u were u want to send apps to,ext 2,3,4 or FAT 32,select FAT 32 as its what u want,then a error msg will appear,reboot,then open link2sd and now you've got your fat 32 lol
Sent from my HTC Sensation XL with Beats Audio X315e using xda premium
Ty5982 said:
Partition ur sd card in recovery with 1gb and swap size 64mb,THEN,open link2sd and when u 1st open it,it checks your phone and sd card then prompts u were u want to send apps to,ext 2,3,4 or FAT 32,select FAT 32 as its what u want,then a error msg will appear,reboot,then open link2sd and now you've got your fat 32 lol
Sent from my HTC Sensation XL with Beats Audio X315e using xda premium
Click to expand...
Click to collapse
Won't that have moved his apps to a fat32 partition?
If I'm reading this correctly what the OP wants is to move his apps to NAND so he can format his sd card to its full capacity in FAT32, presumably so he can use it as a normal SD card (eg for a camera, moving files etc)
I personally use a very popular app called DarkTremors Apps2SD GUI, it comes preinstalled on a lot of custom ROMS. This app checks where your apps are when you launch it, and gives you the option to either move them to SD-EXT or back again. Launch APPS2SDGUI, let it check your system, then click 'Apps are on SD!' to move them back to NAND.
P.S. I don't think you can wipe the SD-EXT partition off the SD card using Windows' built-in formatter. There are lots of freeware apps that can and will do this though, google is your friend =]
jwchips said:
Won't that have moved his apps to a fat32 partition?
If I'm reading this correctly what the OP wants is to move his apps to NAND so he can format his sd card to its full capacity in FAT32, presumably so he can use it as a normal SD card (eg for a camera, moving files etc)
I personally use a very popular app called DarkTremors Apps2SD GUI, it comes preinstalled on a lot of custom ROMS. This app checks where your apps are when you launch it, and gives you the option to either move them to SD-EXT or back again. Launch APPS2SDGUI, let it check your system, then click 'Apps are on SD!' to move them back to NAND.
P.S. I don't think you can wipe the SD-EXT partition off the SD card using Windows' built-in formatter. There are lots of freeware apps that can and will do this though, google is your friend =]
Click to expand...
Click to collapse
@Ty5982, unfortunately it didn't work. It went badly and I lost the apps in sd-ext so I ended up restoring them..
@jwchips, thanks! Will try that one instead. Yep, I've read about the tools/apps that can be used to partition/format storage devices with EXT. Thanks again.
ejebyte said:
@Ty5982, Thanks for the input! Will try that later.
@greg17477, I'm using Windows so I want to format it to a single Fat32 partition. What's your recommendation?
Click to expand...
Click to collapse
well i would recommend tu have 2 partitions, ext and fat. Just to be safe or prapared in case your want to try a different rom. Nowadayes almost every rom uses ext partition. And you won't run out of space, if you install some more apps.
greg17477 said:
well i would recommend tu have 2 partitions, ext and fat. Just to be safe or prapared in case your want to try a different rom. Nowadayes almost every rom uses ext partition. And you won't run out of space, if you install some more apps.
Click to expand...
Click to collapse
I see. Thanks! Currently I have a 512MB EXT partition on my SD card. I thought I'd be able to choose which apps to move there but it seems my ROM automatically symlinks the apps installed to the EXT partition.
So I decided I want to just install the apps to NAND since I don't really install a lot of apps and I'm using a TMOUS HD2, just for an extra boost in performance compared to when apps are installed to SD-EXT. Then I'll just selectively move apps to SD.
ejebyte said:
I see. Thanks! Currently I have a 512MB EXT partition on my SD card. I thought I'd be able to choose which apps to move there but it seems my ROM automatically symlinks the apps installed to the EXT partition.
So I decided I want to just install the apps to NAND since I don't really install a lot of apps and I'm using a TMOUS HD2, just for an extra boost in performance compared to when apps are installed to SD-EXT. Then I'll just selectively move apps to SD.
Click to expand...
Click to collapse
ah ok, on TMOUS HD2 you might do not need an ext partition
greg17477 said:
ah ok, on TMOUS HD2 you might do not need an ext partition
Click to expand...
Click to collapse
That's what I've figured..
I might just back-up everything then re-flash and repartition my phone and SD card. Anyway, thanks everyone!
ejebyte said:
That's what I've figured..
I might just back-up everything then re-flash and repartition my phone and SD card. Anyway, thanks everyone!
Click to expand...
Click to collapse
Hi, I hope you guys are still around, I´ve been looking for an answer and can´t find anything, heres the question I posted on another thread:
I´ve been having trouble with my phone freezing even after full wipes, so I´ve come to the conclusion my sdcard is corrupt.
So I want to go through the Gparted process to format and re-partition my sdcard.
Currently I have 16GB class 6, which has the recommended FAT32 and 1GB ext4.
Is it safe (or even possible) to format the sd card now. I tried with Gparted and only the FAT32 partition showed up???
The rom is runnymede aio which requires the ext4
Thanks
colinmc8 said:
Hi, I hope you guys are still around, I´ve been looking for an answer and can´t find anything, heres the question I posted on another thread:
I´ve been having trouble with my phone freezing even after full wipes, so I´ve come to the conclusion my sdcard is corrupt.
So I want to go through the Gparted process to format and re-partition my sdcard.
Currently I have 16GB class 6, which has the recommended FAT32 and 1GB ext4.
Is it safe (or even possible) to format the sd card now. I tried with Gparted and only the FAT32 partition showed up???
The rom is runnymede aio which requires the ext4
Thanks
Click to expand...
Click to collapse
be sure to format both partitions as primary.
Hi there,
I successfully flashed an Android 4.2.1 Native SD ROM on the HD2's NAND (TimeJelly). This is the procedure I followed (coming from a complete erase of the phone's NAND, as the result of a failed previous attempt, lol):
Flashed HSPL 2.08
Flashed Radio compatible with 576 MB of ram (12.xx.50.xx if I recall correctly)
Flashed MAGDLR 1.13
Flashed CWM 6.0
Flashed the ROM from CWM by choosing zip from sd card.
And everything is good and working. But, I used one friend's SD to flash (since I still don't have one)... Now, I'd like to swap out the SD I used to flash (I understand it did automatically create an Ext4 partition on it?) and use the one I'll buy tomorrow.
What do I have to do? Without the SD the phone will just refuse to boot, stucking at the green HTC logo. Do I just have to partition the new SD from CWM? Do I have to flash everything again? (Jeeeeez).
I understand the EXT4 partition would be used only for the data, since it is stated Data2Ext in the ROM's title. ROM is in the NAND with DATA2EXT (the exact option I chose during installation, second one).
Any help will be GREATLY appreciated
4l3xXx said:
Hi there,
I successfully flashed an Android 4.2.1 Native SD ROM on the HD2's NAND (TimeJelly). This is the procedure I followed (coming from a complete erase of the phone's NAND, as the result of a failed previous attempt, lol):
Flashed HSPL 2.08
Flashed Radio compatible with 576 MB of ram (12.xx.50.xx if I recall correctly)
Flashed MAGDLR 1.13
Flashed CWM 6.0
Flashed the ROM from CWM by choosing zip from sd card.
And everything is good and working. But, I used one friend's SD to flash (since I still don't have one)... Now, I'd like to swap out the SD I used to flash (I understand it did automatically create an Ext4 partition on it?) and use the one I'll buy tomorrow.
What do I have to do? Without the SD the phone will just refuse to boot, stucking at the green HTC logo. Do I just have to partition the new SD from CWM? Do I have to flash everything again? (Jeeeeez).
I understand the EXT4 partition would be used only for the data, since it is stated Data2Ext in the ROM's title. ROM is in the NAND with DATA2EXT (the exact option I chose during installation, second one).
Any help will be GREATLY appreciated
Click to expand...
Click to collapse
If I understand correctly you want to move your sd content/installation to a new card, yes?
Go to the sd card thread in my signature and read post # 2. Specifically the part about backing up and restoring an sd card image.
---
If you choke a smurf, what color does it turn? (via Tapatalk)
NYLimited said:
If I understand correctly you want to move your sd content/installation to a new card, yes?
Go to the sd card thread in my signature and read post # 2. Specifically the part about backing up and restoring an sd card image.
---
If you choke a smurf, what color does it turn? (via Tapatalk)
Click to expand...
Click to collapse
Nono, I just installed a native sd ROM on the phone's NAND, and now it will simply not boot without an EXT4 formatted SD (because the /data partition is there, not on the NAND).
I repartitioned the SD from CWM this morning choosing 2 GB of EXT partition, and 2 GB of FAT32 partition, and everything is working. But, there's another problem. Whenever I reboot the phone, it will simply lose EVERY single setting, and it prompts me again to choose the language, google accounts ecc...
Any help?
4l3xXx said:
Nono, I just installed a native sd ROM on the phone's NAND,
Click to expand...
Click to collapse
no you didnt, , a nativeSD rom lives in the EXT partition, If you installed a rom to nand, then its a nand rom. If you install it to teh FAT partition, its an SD rom, if you install it to the sd-ext, its a nativeSD rom.
I understand it did automatically create an Ext4 partition on it?
Click to expand...
Click to collapse
no, you must create the ext partitions yourself.
Sounds to me like you have a nand rom, which is also using dataonext, , meaning teh rom lives on Nand, and the data partition is mounted onto the sd-ext, , in which case.....
into CWM - full backup
new sd card into phone
into cwm - create ext partition on new sd card
in cwm - selectively restore ONLY the sd-ext partition (you will need to have coppied over the fat32/clockwork/backups folder from the old card to teh new card)
reboot.
samsamuel said:
into CWM - full backup
new sd card into phone
into cwm - create ext partition on new sd card
in cwm - selectively restore ONLY the sd-ext partition (you will need to have coppied over the fat32/clockwork/backups folder from the old card to teh new card)
reboot.
Click to expand...
Click to collapse
The SD card image backup would, essentially, duplicate a card in entirety, all partitions included.
---
If you choke a smurf, what color does it turn? (via Tapatalk)
NYLimited said:
The SD card image backup would, essentially, duplicate a card in entirety, all partitions included.
Click to expand...
Click to collapse
i didn't say anything about an sd card backup, i said do a full cwm backup, which includes the system, data, boot and sd ext partitions, and not the fat32 partition, and then restore only the sdext partition to the new card (after of course creating teh new ext partition on teh new card)
edit