Database Users

Pls help ti solve NO GSM problem!

Could anyone can help me to solve No GSM poblem. I think there are many other users have same problem.
After it faild during update rom, My HP6915 represent NO GSM during booting and the phone funcation also doesn't work. But in HP Asset you can see it, just no firmware, no version number. I try to flash english radio rom and french radio rom, but always stop at 1%. This matter appeared after I flashed orange rom(french version). I think it locked by Orange.
Does any one can help us?

did you try the update with no sim and no minsd?

EREZYAD said:
did you try the update with no sim and no minsd?
Click to expand...
Click to collapse
Yes, I update without sim card and minisd. Always stop at 1%

to be on the safe side i will go over general insraction
battery full
recomended xp os & activesync 4.5 (not beta)
minsd & sim out
ac addapter connected (ac power from orig transformer)
hart reset your device before the update
connect device directly to computer's usb plug
run the update
try radio only &/or the all update you can also try on a different pc
if all didn't work read this and see if you can find somthing that works on the 6900
http://www.htcwizardweb.net/node/170
good luck

EREZYAD said:
to be on the safe side i will go over general insraction
battery full
recomended xp os & activesync 4.5 (not beta)
minsd & sim out
ac addapter connected (ac power from orig transformer)
hart reset your device before the update
connect device directly to computer's usb plug
run the update
try radio only &/or the all update you can also try on a different pc
if all didn't work read this and see if you can find somthing that works on the 6900
http://www.htcwizardweb.net/node/170
good luck
Click to expand...
Click to collapse
Thank you for your reply!
I tried but still same, stop at 1% when I flash Radio WAN OS, stop at 2% when I flash Radio FS. I tried to unlock simlock and CID unlock, but it doesn't work on my 6965

called a few places looks like the radio chip is fried. sorry man...not looking good.

try update again with this method
I got almost same problem. I tried to update GSM rom but update fail and my ipaq stuck at hp invent logo. try following steps to see if it works for you
Solution:
this is what I did to get this fixed.
1) Get the battery out of the iPaq, and wait for a few minutes while the "serial" image fades away slowly.
2) In the meantime, prepare your cradle, plugged into the AC charger and plugged via USB to your PC.
3) After a few minutes, with the screen of the iPaq completely gray, put the battery and battery cap back on (with our without SIM card), and put it on the cradle immediately.
4) The iPaq should start coming back to life, as if it were being hard reset. Let is stay on the welcome screen (i.e., do not tap it or anything).
5) Restart the upgrade process, it should proceed from there OK
Thank you to origianl solution provider

I also meet such question.

actualy. I met the same problem "No GSM" after wrong update. I thing I tried everything, but I Didn't try to flash the device via mini-sd card. I don't know the right address for GSM area. Did anyone know?

caoxt said:
I also meet such question.
Click to expand...
Click to collapse
COME ON guys some one can help us , i have too the same problem please help with radio stack !!!!!!!!!

me too,, really nedd help here.. my only phone sable...

USB Problem

Hi,
if i connect my HTC Touch HD with my computer, it's just charging, nothing more. If i go to Bootloader, there is just written Serial even if its connected.
I am using Dutty ROM since some weeks and didn't had any problems till a few days ago, the strange thing is, that i didn't change anything.
I tried it on my laptop and on my computer the one with windows vista the other one with win xp, it worked on both, but not anymoe.
i also have a problem with the camera, if i press it nothing happens it just stays in the menu. Some days ago i got a error failed to initialize camera, but no more error anymore.
In my opinion my hardware is broken somehow, i hope someone in here can tell me sth different and a solution.
And if my hardware is broken, how can flash my original rom back without an usb connection, because the warenty will be gone with a custom rom i think.
I hope someone can help me.

Kryston said:
Hi,
if i connect my HTC Touch HD with my computer, it's just charging, nothing more. If i go to Bootloader, there is just written Serial even if its connected.
I am using Dutty ROM since some weeks and didn't had any problems till a few days ago, the strange thing is, that i didn't change anything.
I tried it on my laptop and on my computer the one with windows vista the other one with win xp, it worked on both, but not anymoe.
i also have a problem with the camera, if i press it nothing happens it just stays in the menu. Some days ago i got a error failed to initialize camera, but no more error anymore.
In my opinion my hardware is broken somehow, i hope someone in here can tell me sth different and a solution.
And if my hardware is broken, how can flash my original rom back without an usb connection, because the warenty will be gone with a custom rom i think.
I hope someone can help me.
Click to expand...
Click to collapse
A hard reset will quickly tell you if it's hardware or software and you don't need usb for that. There is also an option which dictates what the phone does when connected via usb, so you might want to check that option first.

need to read & search a little more
last paragraph of this post outlines how to return to stock rom
http://forum.xda-developers.com/showpost.php?p=2710548&postcount=1

i did hardreset, but still same problem
what i also noticed, is that sometimes my display don't work, i have sound and vibrate feedback, but i see just a black display, softreset etc doesen't work somehow i have to take of the battery.
i noticed also that the usb cable is a bit broken, but it still charges the phone.
but i already saw that normal usb cable should work too, so i tried it but no change.
i guess i will try to get the stock rom again now and see what happens

well like i thought, i can't get the stock rom, because i dont have a usb connection
any more suggestions?

Kryston said:
well like i thought, i can't get the stock rom, because i dont have a usb connection
any more suggestions?
Click to expand...
Click to collapse
There is 2 methods to flashing roms. Have you tried SD card method?
1. Download ROM image you would like to use, normally named RUU_Signed.nbh, and rename it to "BLACIMG.nbh"
2. Copy BLACIMG.NBH into the root dir of your Storage Card.
3. Be sure to have at least 30% of charge.
4. Turn off your device by using the Power Button
5. Go to bootloader mode. Push and hold Vol Down + press Power button.
6. As soon as presented the message, push Power button to start flashing or Volume Down button to cancel.
7. The whole procedure will take about 3 minutes. After you finish and see the relative message, soft reset your device, you are ready.

thanks god i didn't bring the phone to shop yet xD
thank u, i will check this method i will post here if it works later

well now i have another problem
there is written upgrade rom code error please try again on bootloader, i cant turn it on anymore it gets stuck on the loading screen of the flashing progress

Kryston said:
well now i have another problem
there is written upgrade rom code error please try again on bootloader, i cant turn it on anymore it gets stuck on the loading screen of the flashing progress
Click to expand...
Click to collapse
I had this exact same problem a while back after a bad flash. What you need to do is flash carriers orginal stock rom onto device. This will be the only rom which will work. Go to wiki section on stock roms here and download your original rom and flash it. Don't worry if bottom of bootloader is blank or doesn't say 'usb', original rom will flash anyhow.
More info read this thread

i am downloading right now, hopefully it will work, i will write more infos later
thank u for your help, without you, i would be lost...

i am stuck, i get error 206 connection
i downloaded stock rom to my pc
and i'm a bit confused, my pc noticed that i pluged in the phone, my device manager showed my phone, this worked only one time, now nothing...
EDIT: in bootloader mode, serial staus doesnt switch to usb or blank, updateing usb driver doesn't work without usb connection to device, at least i didnt found sth here
i will try it on my other computer now, but i doubt it will work
EDIT2: got usb connection for some seconds, problem is my hardware of device its broken somehow, if i press on th eback of the device i am able to get usb connection, now it failed, i will give it some more tries, there was sth 294 ID error
EDIT3: seems like its the wrong rom, how can i find out which rom will work?
EDIT4: semms like i got a working rom its at 10%
EDIT5: Device working again, usb working perfectly again, dunno why, but camera still doesnt work, there happens nothing if i press on it and display turns black sometimes as before.
i flashed an O2 Rom now, from my provider.
My last question now is, what about warranty, how can i know that uspl/hsapl is fully removed from device and how to find out if device is now a case of warrnty, where can i check it? because i want a working camera again, so i think i need the warranty
Some infos:
O2 Provider ROM flashed
On Bootloader i see:
BLAC100 32M
SPL-1.54.0000
MicroP-Blackstone (LED) v6
In my opinion its fine for warranty, but i want someone to confirm this.
And thank you alot for ur help and work in this forum =)

If you have an official HTC upgrade rom on your device you are fine for warranty. As your SPL says 1.54.0000 this means you haven't got USPL or HSPL on your device, so you're fine.

thank you very much

hi can anyone help me please :(.

Hi everyone i was wondering if anyone could help me... i have several questions about my htc touch elf see i just upgraded it to the onyx 4.something version and after 4 days the wifi stoped working it wont turn on and it wont detect my sd card either... i was wondering if anyone could help me on how to degrade it to a better ROM or anything cause when i try to degrade the onyx 4.something to 3.0 it says it cant establish a conection between the phone and the computer when i run the romupgradeutlity and when i hit the upgradeimage buttom... ... please help me.. thanks a lot!

post in Onyx ROM thread and read the stickies.

Your Elf Device, Our Vogue Device
Sorry, your device is simply different internally.
http://forum.xda-developers.com/showthread.php?t=713265

rasv19 said:
Hello I was wondering if anyone could help me... i have an htc touch elf and i upgraded it to the Onyx 4.0 after 4 days of use it started giving me some trouble sometimes i hitted the touch screen and it opened something else , my wifi stoped working it wont turn on and it wont detect my micro SD... i tried downgrading to Onyx 3.0 through ROMupdateutility but when it was at 0% it said it coudlnt detect the mobile device... i was wondering if anyone could help me fix this problem cause i want my phones wifi to work and micro sd too. thanks a lot.
Click to expand...
Click to collapse
please try a hard reset, that should help solve the problems.
i doubt if this is anything to do with ROM you flashed (since you have flashed successfully, as your phone does boot.
if none of this works please post.
a hard reset should help you though.

rasv19 said:
nope it didnt worked my phones wifi still not working and its not detecting my sd card.... like wheneve ri turn blutooth on the wifi green light turns on with it but the wifi wont turn on itself and then when i go to the music thing on my phone it detects the first song i have but when i play it says theres no files and the sd card wont show up on the file explorer.... and other thing when i try upgrading or downgrading my phone by romupgrade utility i get the error 222 canot eswtablish conections between your pda and computer check usb cable.... so i dont know cause the first time i upgraded it from the manufacture ROM to the onyx 4.somethhing it went pretty great..
Click to expand...
Click to collapse
i see, error222.
please make sure that your USB cable is working.
pleasemake sure your computer has active sync 4.5 installed ( if windows XP)
or the latest WMDC (if vista or win7 )
also regarding the memory card, are u sure the card is fine ?
please put it another device/card reader and check, try formatting it and see if ur elf detects it.
ROMs usually don't have anything to do with memory drivers.
what HSPL/USPL did u flash ?

Prowess said:
Sorry, your device is simply different internally.
http://forum.xda-developers.com/showthread.php?t=713265
Click to expand...
Click to collapse
You posted in the Vogue section. I have transferred your thread to the Elf section.

yeah it works on other devices.... the usb cable is working really fine and i dont know what uspl i flashed .. . like i mean everything went rite until 4 days after i instaled the onyx 4.0 ultimate everything was working fine with it but 4 days later it started to give me that problem ... and i try to change ROM but i cant it wont let me i run active sync andeveyrthing it says its conected i run the romupdateutiliy then the status bar opens up but it stays at 0% and then the error 222 shows up... but my phone goes to the bootloader but it wont pass from there.. and when i close the romupdateutility my phone switches to the status bar but stays in 0% and then my phone crashes and i have to unbrick it.

first of all please do not open 3 different threads for the same problem, i have removed the other two.
also as aman said try posting in the the rom thread.
please read thee thread which have been stickied on the ROM development thread.
please be patient
thanks for your co-orperation.

[Q] dead HD2

how can i revive my dead T-MOBILE HD2?...
it has no power & bootloader; only continuous vibration after pressing the power button...

donkeanu said:
how can i revive my dead T-MOBILE HD2?...
it has no power & bootloader; only continuous vibration after pressing the power button...
Click to expand...
Click to collapse
What did you do right before it was dead?
Did you change the Radio?

Might be battery related too.
Try to find someone else with an HD2 and swap the battery to try.

help
same here. i accidentaly flashed a diff radio rom
it just contiunsly vibrates
no light, no power,... please help me in reviving this .
thanks,

sugui said:
same here. i accidentaly flashed a diff radio rom
it just contiunsly vibrates
no light, no power,... please help me in reviving this .
thanks,
Click to expand...
Click to collapse
You cant, you've bricked it. Only way is to JTAG or replace board as far as I know.

sugui said:
same here. i accidentaly flashed a diff radio rom
it just contiunsly vibrates
no light, no power,... please help me in reviving this .
thanks,
Click to expand...
Click to collapse
If you have flashed a EU/Asian Radio/stock ROM on a T-Mous device, than it's broken.

kurt-willems said:
What did you do right before it was dead?
Did you change the Radio?
Click to expand...
Click to collapse
I can still enter botloader flash hspl but can do nothing the phone just turns off
can anyone help me! when i connect and try to flash another rom it turns off at 29% ! Has anyone been able to solve this problem! it is a brand new phone i bricked the same day i bought it trying to put the energy rom! i dont live in the usa so i paid a hard 500 bucks to get this phone all for nothing

Don-Maco said:
I can still enter botloader flash hspl but can do nothing the phone just turns off
can anyone help me! when i connect and try to flash another rom it turns off at 29% ! Has anyone been able to solve this problem! it is a brand new phone i bricked the same day i bought it trying to put the energy rom! i dont live in the usa so i paid a hard 500 bucks to get this phone all for nothing
Click to expand...
Click to collapse
If you can get it into bootloader than it is not bricked. It sort of sounds like you might have a dead battery. Try to let it charge are maybe get an external charger for it.
Now as for your problem with installing a ROM you can flash either by USB and computer or via SD card. If you use the USB and computer method then out your phone into bootloader and connect it to the computer via USB cable and wait for Serial in the white bar of the bootloader screen to change to USB and then flash the ROM.
If you want to use the SD card method put your SD card into a micro SD card reader and plug it into your computer. If the ROM you downloaded is a .exe then change it to .zip and then right click and select viewl or explore wich ever one it shows. Find the .nbh file and rename it to leoimg.nbh and copy it to the SD card and insert the SD card into your phone. Put your phone into bootloader but hold the volume down button down until you see searching on your phone screen then release the volume down button. The ROM will then flash.

T-Macgnolia said:
If you can get it into bootloader than it is not bricked. It sort of sounds like you might have a dead battery. Try to let it charge are maybe get an external charger for it.
Now as for your problem with installing a ROM you can flash either by USB and computer or via SD card. If you use the USB and computer method then out your phone into bootloader and connect it to the computer via USB cable and wait for Serial in the white bar of the bootloader screen to change to USB and then flash the ROM.
If you want to use the SD card method put your SD card into a micro SD card reader and plug it into your computer. If the ROM you downloaded is a .exe then change it to .zip and then right click and select viewl or explore wich ever one it shows. Find the .nbh file and rename it to leoimg.nbh and copy it to the SD card and insert the SD card into your phone. Put your phone into bootloader but hold the volume down button down until you see searching on your phone screen then release the volume down button. The ROM will then flash.
Click to expand...
Click to collapse
Thats the problem my battery works in another phone but my phone just not stay on! it stays long enough to flash catula & beepe hspl and back to spl! if i try flashing a radio is it flashes it then says its not supported on this rom after 100% if its not supported why install after 100% i got the radio on the t-mobile forum! so its good! When i used anothe battery that is charged to 100% the phone just wouldn't turn on! i even ordered a new battery and data cable yesterday brand new & will have to wait a crazy two weeks shipping! I ant see what went wrong cuz i have been flashing Htc & windows mobile devices like for ever! just this usa version wich is supposed to be high end is giving me the creeps! what can i do

Don-Maco said:
Thats the problem my battery works in another phone but my phone just not stay on! it stays long enough to flash catula & beepe hspl and back to spl! if i try flashing a radio is it flashes it then says its not supported on this rom after 100% if its not supported why install after 100% i got the radio on the t-mobile forum! so its good! When i used anothe battery that is charged to 100% the phone just wouldn't turn on! i even ordered a new battery and data cable yesterday brand new & will have to wait a crazy two weeks shipping! I ant see what went wrong cuz i have been flashing Htc & windows mobile devices like for ever! just this usa version wich is supposed to be high end is giving me the creeps! what can i do
Click to expand...
Click to collapse
note i cant flash the rom cuz it hangs at 29% then nothing happens for like 10 minutes! then the phone turns itself off! and it just wouldn't budge! i never flashed through sd card so i really would like the exact steps to avoid errors! i dont wanna screw 500u$d

Don-Maco said:
Thats the problem my battery works in another phone but my phone just not stay on! it stays long enough to flash catula & beepe hspl and back to spl! if i try flashing a radio is it flashes it then says its not supported on this rom after 100% if its not supported why install after 100% i got the radio on the t-mobile forum! so its good! When i used anothe battery that is charged to 100% the phone just wouldn't turn on! i even ordered a new battery and data cable yesterday brand new & will have to wait a crazy two weeks shipping! I ant see what went wrong cuz i have been flashing Htc & windows mobile devices like for ever! just this usa version wich is supposed to be high end is giving me the creeps! what can i do
Click to expand...
Click to collapse
Check your battery pins in your HD2 to make sure that one or more of them are not slightly bend more than it should be. If none don't appear to be bend if possible compare them to another HD2 to make sure the are in the proper positions. If they are then you might have an internal hardware problem. But don't just take my word for thag cause I am no expert when it
comes to the hardware side of the HD2.
Edit: I just read your other post here is a link to the thread on flashing via SD card. Read the first post for detailed instructions on flashing via SD card

heey thanks man i'll try that as soon as i get from work and see if that helps!

T-Macgnolia said:
Check your battery pins in your HD2 to make sure that one or more of them are not slightly bend more than it should be. If none don't appear to be bend if possible compare them to another HD2 to make sure the are in the proper positions.
Click to expand...
Click to collapse
Thanks for that tip, it solved my problem: the middle pin wasn't in proper position.

[Q] Help please!!

I installed maglar 1.12 on my hd2 using the nbh file method... now my hd2 wont turn off it just restarts as soon as you turn it off or put the battery back in.... when in magldr the button lights flash repeditally.... I can still flash roms using maglr usb method but when the roms are booted up the button lights are on constantly even in sleep, it seems to recive random input, and you cant put it in sleep mode and when it goes into sleep mode naturally you cant turn it back on........ My first thought was to try and to go back to stock but because I dont have a windows mobile rom on I cant use the active sync method and for some weird reason it wont go to the bootloader(yes I know how to get to the bootloader I am not and idiot)........ so I am stuck and dont know what to do

nchar123 said:
I installed maglar 1.12 on my hd2 using the nbh file method... now my hd2 wont turn off it just restarts as soon as you turn it off or put the battery back in.... when in magldr the button lights flash repeditally.... I can still flash roms using maglr usb method but when the roms are booted up the button lights are on constantly even in sleep, it seems to recive random input, and you cant put it in sleep mode and when it goes into sleep mode naturally you cant turn it back on........ My first thought was to try and to go back to stock but because I dont have a windows mobile rom on I cant use the active sync method and for some weird reason it wont go to the bootloader(yes I know how to get to the bootloader I am not and idiot)........ so I am stuck and dont know what to do
Click to expand...
Click to collapse
what happens when you try to go to bootloader?

Bro, try flashing any windows mobile 6.5.* rom on your hd2..
To do so, enter hd2 in bootloader mode,
Keep pressing DOWN + POWER when device is switchd off initially
and flash any rom.
This will surely help you

orangekid said:
what happens when you try to go to bootloader?
Click to expand...
Click to collapse
Yes what happens when you try to boo into bootloader?

strange mate!!!
when you ask for help be positive!!!!
use wise words....i stood 5 min to reply u or not!!!
because no one is an idiot on XDA,....
flash radio 2.15 first!!!
if ur phone want work
than
flash from SD card your custom rom 6.5 (search for the steps on xda)
your phone want start for sure!!!!!
but you will get back you bootloader back
1-HSPL
2-T29
3-Mag-loader 1.13
4-flash radio 2.15
5-flash your ROM

nchar123 said:
I installed maglar 1.12 on my hd2 using the nbh file method... now my hd2 wont turn off it just restarts as soon as you turn it off or put the battery back in.... when in magldr the button lights flash repeditally.... I can still flash roms using maglr usb method but when the roms are booted up the button lights are on constantly even in sleep, it seems to recive random input, and you cant put it in sleep mode and when it goes into sleep mode naturally you cant turn it back on........ My first thought was to try and to go back to stock but because I dont have a windows mobile rom on I cant use the active sync method and for some weird reason it wont go to the bootloader(yes I know how to get to the bootloader I am not and idiot)........ so I am stuck and dont know what to do
Click to expand...
Click to collapse
People he can not flash anything having to do with flashing via the SPL bootloader, this is why Orangekid and I both asked what happens when the OP trys to boot into bootloader.

calm down everyone!
lol
sorry, like others have mentioned, what exactly happens from start to finish when you try and get in to the boot loader, yes i know you said you know how to do it
but humour us, start to finish, buttons you push, whats on teh screen, everything.
sounds like something in the SPL has been screwed, been a lot of that recently which is a bit odd.

I can not get to the bootloader
I know that I cant get to the bootloader I tried the way you said above again and it just goes stright to magldr so I can not flash back to stock ........ I took it to a phone repair guy who said he fixed it and it appeared like he did but then two hours later it started again .......

Here is a video of my phone
*htt*p:/*/ww*w.y*ou*tube.c*om/watch?v=U7h3flLrE5g** I put the stars because I can post links right now but this is a video of my phone

nchar123 said:
*htt*p:/*/ww*w.y*ou*tube.c*om/watch?v=U7h3flLrE5g** I put the stars because I can post links right now but this is a video of my phone
Click to expand...
Click to collapse
Ok everyone as you can see he can not get the SPL bootloader to come up.
I will help you out with your Youtube link too.
I am very sorry to tell you but without being able to get to the bootloader you can not flash a official ROM back to the HD2 so you can not send it in for warranty exchange our repair. That is unless there is some miracle program out there that you can run from your computer to force the bootloader to bootup, which i have never heard of one. (Note to Devs that would be a awesome program to create if it is possible )
There is the bootloader.exe but you already have to have a Sync type connection for it to work and i don't know if the connection you get using Zune is enough. I attached the a EnterBootloader.zip file but like I said i don't know if it will help you are not. Try connecting and syncing your HD2 with Zune and then try to run the EnterBootloader.exe from your computer and see what happens.

Thanks for the program but when I try to run it in windows phone 7 it gives me the error that it is not a valid windows phone 7

Is there a way I could update or change magldr without the bootloader? or is there any sort of windows mobile rom I could install through magldr like you would with android or wp7?

I mean sorry it gives the are that it is not a valid win32 aplication not windows phone 7 that was a typo

nchar123 said:
Is there a way I could update or change magldr without the bootloader? or is there any sort of windows mobile rom I could install through magldr like you would with android or wp7?
Click to expand...
Click to collapse
Was shocked to watch your video !!
there is no way to flash windows 6.5 roms directly through MAGLDR..
would suggest you to get HD2 to nearby mobile repair center, hopefully they can help you out

Do you know of one around san diego or a place that could do jtag?

nchar123 said:
Do you know of one around san diego or a place that could do jtag?
Click to expand...
Click to collapse
I know someone in that can JTAG your HD2 buit he lives in Texas, but he is very good and experienced with JTAGing HD2s, PM me if you want more info as it would be against the rules for me to provide any other information in the forums.
Also I do not think you need JTAG but just need your voulume rocker fixed, but he is still the guy to do it.

the volume buttons should be easy to test within windows its self
I doubt its MAGLDR issue, it looks like an SPL issue.

could you tell me how much the jtag would cost and the volume down and up buttons work when the wp7 build is up