Hi,
if i connect my HTC Touch HD with my computer, it's just charging, nothing more. If i go to Bootloader, there is just written Serial even if its connected.
I am using Dutty ROM since some weeks and didn't had any problems till a few days ago, the strange thing is, that i didn't change anything.
I tried it on my laptop and on my computer the one with windows vista the other one with win xp, it worked on both, but not anymoe.
i also have a problem with the camera, if i press it nothing happens it just stays in the menu. Some days ago i got a error failed to initialize camera, but no more error anymore.
In my opinion my hardware is broken somehow, i hope someone in here can tell me sth different and a solution.
And if my hardware is broken, how can flash my original rom back without an usb connection, because the warenty will be gone with a custom rom i think.
I hope someone can help me.
Kryston said:
Hi,
if i connect my HTC Touch HD with my computer, it's just charging, nothing more. If i go to Bootloader, there is just written Serial even if its connected.
I am using Dutty ROM since some weeks and didn't had any problems till a few days ago, the strange thing is, that i didn't change anything.
I tried it on my laptop and on my computer the one with windows vista the other one with win xp, it worked on both, but not anymoe.
i also have a problem with the camera, if i press it nothing happens it just stays in the menu. Some days ago i got a error failed to initialize camera, but no more error anymore.
In my opinion my hardware is broken somehow, i hope someone in here can tell me sth different and a solution.
And if my hardware is broken, how can flash my original rom back without an usb connection, because the warenty will be gone with a custom rom i think.
I hope someone can help me.
Click to expand...
Click to collapse
A hard reset will quickly tell you if it's hardware or software and you don't need usb for that. There is also an option which dictates what the phone does when connected via usb, so you might want to check that option first.
need to read & search a little more
last paragraph of this post outlines how to return to stock rom
http://forum.xda-developers.com/showpost.php?p=2710548&postcount=1
i did hardreset, but still same problem
what i also noticed, is that sometimes my display don't work, i have sound and vibrate feedback, but i see just a black display, softreset etc doesen't work somehow i have to take of the battery.
i noticed also that the usb cable is a bit broken, but it still charges the phone.
but i already saw that normal usb cable should work too, so i tried it but no change.
i guess i will try to get the stock rom again now and see what happens
well like i thought, i can't get the stock rom, because i dont have a usb connection
any more suggestions?
Kryston said:
well like i thought, i can't get the stock rom, because i dont have a usb connection
any more suggestions?
Click to expand...
Click to collapse
There is 2 methods to flashing roms. Have you tried SD card method?
1. Download ROM image you would like to use, normally named RUU_Signed.nbh, and rename it to "BLACIMG.nbh"
2. Copy BLACIMG.NBH into the root dir of your Storage Card.
3. Be sure to have at least 30% of charge.
4. Turn off your device by using the Power Button
5. Go to bootloader mode. Push and hold Vol Down + press Power button.
6. As soon as presented the message, push Power button to start flashing or Volume Down button to cancel.
7. The whole procedure will take about 3 minutes. After you finish and see the relative message, soft reset your device, you are ready.
thanks god i didn't bring the phone to shop yet xD
thank u, i will check this method i will post here if it works later
well now i have another problem
there is written upgrade rom code error please try again on bootloader, i cant turn it on anymore it gets stuck on the loading screen of the flashing progress
Kryston said:
well now i have another problem
there is written upgrade rom code error please try again on bootloader, i cant turn it on anymore it gets stuck on the loading screen of the flashing progress
Click to expand...
Click to collapse
I had this exact same problem a while back after a bad flash. What you need to do is flash carriers orginal stock rom onto device. This will be the only rom which will work. Go to wiki section on stock roms here and download your original rom and flash it. Don't worry if bottom of bootloader is blank or doesn't say 'usb', original rom will flash anyhow.
More info read this thread
i am downloading right now, hopefully it will work, i will write more infos later
thank u for your help, without you, i would be lost...
i am stuck, i get error 206 connection
i downloaded stock rom to my pc
and i'm a bit confused, my pc noticed that i pluged in the phone, my device manager showed my phone, this worked only one time, now nothing...
EDIT: in bootloader mode, serial staus doesnt switch to usb or blank, updateing usb driver doesn't work without usb connection to device, at least i didnt found sth here
i will try it on my other computer now, but i doubt it will work
EDIT2: got usb connection for some seconds, problem is my hardware of device its broken somehow, if i press on th eback of the device i am able to get usb connection, now it failed, i will give it some more tries, there was sth 294 ID error
EDIT3: seems like its the wrong rom, how can i find out which rom will work?
EDIT4: semms like i got a working rom its at 10%
EDIT5: Device working again, usb working perfectly again, dunno why, but camera still doesnt work, there happens nothing if i press on it and display turns black sometimes as before.
i flashed an O2 Rom now, from my provider.
My last question now is, what about warranty, how can i know that uspl/hsapl is fully removed from device and how to find out if device is now a case of warrnty, where can i check it? because i want a working camera again, so i think i need the warranty
Some infos:
O2 Provider ROM flashed
On Bootloader i see:
BLAC100 32M
SPL-1.54.0000
MicroP-Blackstone (LED) v6
In my opinion its fine for warranty, but i want someone to confirm this.
And thank you alot for ur help and work in this forum =)
If you have an official HTC upgrade rom on your device you are fine for warranty. As your SPL says 1.54.0000 this means you haven't got USPL or HSPL on your device, so you're fine.
thank you very much
Related
I have a Dopod 818pro that was flashed with the wrong ROM and now all I get to is the DOPOD splash screen. I can get to the TRI color screen by pushing the camera and power button.
I have tried hard reset but seems the OS is missing from the phone.
I have the original ROM for my phone on my PC but can not use active sync as the phone does not go further than the SPLASH screen.
How can I reload my original ROM using the SD card.
Any help would be appreciated.
Thanks
Canada59
use the tricolor screen even though active sync doesnt see it it still flashes but u need to use the flash upgrade wizard and not the cli interface one
Worked for me but i cant sae it will work 100%
Where do I find the flash upgrade wizard?
When I plug usb in, i get usb on the white band in the color screen
Tried to run the update using RUU and get ERROR 260
Thanks for your help in this
Yeah RUU same thing i was meaning that one cause theres another that uses cli but its a bit dodgy
RUU Wizard should work it never detected ma G4 but it flashed it anyway i was well chuffed cause i thought i had bricked it
I just tryed the app without the phone connected and it gave me error 260 so maybe try different cable or pc cause i had a issue with xp not detecting my phone and i had to reinstall xp just to get active sync to work properly
The main problem is that I had a bad flash, now I can not get pass bootloader screen, PC does not see device, active sync says not connected. there must be a method for loading the NK.ntf file from sd
Not came across anything like that as the SD card driver would be loaded at boot with the OS and in your case theres no OS booting it would be hard to sae it can be done but i bet someone will prove me wrong lol
Good Luck mate ill keep an eye out for anything like that though
Thanks for the help....phone is useless at the moment......
Long story short my phone worked fine for months. Went to a 1.56 Rom active sync stopped working. I have already tried everything associated with AS problem, everything. Went to get it repaired at HTC America in Houston, TX there gay and dont support T8285. I have tried flashing via memory card but I seem to be retarded doing it that way. Engineer said mini usb slot works fine, cooked rom may have corrupted AS. Customer service would not let him fix my phone because it was an "aussie version". I just want the phone to sync is that too much to ask? Anyway $100 bucks to anyone that can make it work paid via paypal immediately.
moved out of development
Personally I think your mad offering $100. I'm sure most people would have hepled you for free, including myself. I'm not after your money but offer my assistance.
Have you tried doing a hard reset? uninstalling activesync & reinstalling it?
Flashing different rom. If you can't flash through SD Card, have you tried flashing again via usb. You don't need phone sync'd
Put your phone into bootloader and then connect to pc via usb. At bottom of screen the text should change from 'serial' to 'usb'. Now flash phone by running rom (cooked or stock etc) you downloaded. Put .nbh and ruu file into same folder and then open ruu file and follow instructions.
I severely doubt cooked rom affected activesync.
EDIT
As bonesy said below, you'll need either USPL or HSPL to flash 1.56+ based rom.
Full tutorial or dummies guide to flashing 1.56+ based roms can be found in cRaCKwHoRe's guide. See my signature
Turn off your phone, Take out your memory card, Plug the miniUSB in then power on (Hold volume down press power holding volume down still) This will bring up a coloured screen. Run the ROM Wrapper package exe (BlackstoneRUUWrapper) This SHOULD now install the right ROM.
Please make sure you are using a 1.56 rom with the HSPL or i think it has problems with GFX.
When windows loads go to start>settings>connections>USBtoPC
this is on 6.5 rom not sure about 6.1 :/
Untick Enable faster data synchronizaion, I had to do all this on works computer to update a ROM god knows why but this was my fix.
ROM Should load as should activesync now.
Please let me know if this helps
Tried to post in ure original threads but mods were moving to trash each time BAH!
Thanks to both of you guys for your suggestions. I thought I was not a noob when it came to flashing roms but once I could not do it via usb I was a whole different story. Yeah I am offering the $100 just to get people to help. I know you get slammed if you ask a question so I figured I would make it worth someone's time. I am going right now to pick it up from the repair center so I will try during my lunch in about an hour.
Fallen Spartan said:
Personally I think your mad offering $100. I'm sure most people would have hepled you for free, including myself. I'm not after your money but offer my assistance.
Have you tried doing a hard reset? uninstalling activesync & reinstalling it?
Flashing different rom. If you can't flash through SD Card, have you tried flashing again via usb. You don't need phone sync'd
Put your phone into bootloader and then connect to pc via usb. At bottom of screen the text should change from 'serial' to 'usb'. Now flash phone by running rom (cooked or stock etc) you downloaded. Put .nbh and ruu file into same folder and then open ruu file and follow instructions.
I severely doubt cooked rom affected activesync.
Click to expand...
Click to collapse
I tried uninstalling and reinstalling active sync. Different cables, different computers, xp and vista, everything, checked usb enhanced, etc ,etc.
bonesy said:
Turn off your phone, Take out your memory card, Plug the miniUSB in then power on (Hold volume down press power holding volume down still) This will bring up a coloured screen. Run the ROM Wrapper package exe (BlackstoneRUUWrapper) This SHOULD now install the right ROM.
Please make sure you are using a 1.56 rom with the HSPL or i think it has problems with GFX.
When windows loads go to start>settings>connections>USBtoPC
this is on 6.5 rom not sure about 6.1 :/
Untick Enable faster data synchronizaion, I had to do all this on works computer to update a ROM god knows why but this was my fix.
ROM Should load as should activesync now.
Please let me know if this helps
Tried to post in ure original threads but mods were moving to trash each time BAH!
Click to expand...
Click to collapse
Thanks for breaking it down barney style for me. I will try this very soon. If it works my friend you got $100 smackers.
no worries, Glad to help (if it does lol)
bonesy said:
Turn off your phone, Take out your memory card, Plug the miniUSB in then power on (Hold volume down press power holding volume down still) This will bring up a coloured screen. Run the ROM Wrapper package exe (BlackstoneRUUWrapper) This SHOULD now install the right ROM.
Please make sure you are using a 1.56 rom with the HSPL or i think it has problems with GFX.
When windows loads go to start>settings>connections>USBtoPC
this is on 6.5 rom not sure about 6.1 :/
Untick Enable faster data synchronizaion, I had to do all this on works computer to update a ROM god knows why but this was my fix.
ROM Should load as should activesync now.
Please let me know if this helps
Tried to post in ure original threads but mods were moving to trash each time BAH!
Click to expand...
Click to collapse
So I got my phone and this is what it says.
BLAC120 32M
SPL-1.56.01Olinex
MicroP-Blackstone (LED) v6
and it's just red green blue and white no word on the bottom. Ran BlackstoneRUUWrapper with the nbh file that I wanted and it gave me a connection error. Now it says Seiral in the white.
Fallen Spartan said:
Personally I think your mad offering $100. I'm sure most people would have hepled you for free, including myself. I'm not after your money but offer my assistance.
Have you tried doing a hard reset? uninstalling activesync & reinstalling it?
Flashing different rom. If you can't flash through SD Card, have you tried flashing again via usb. You don't need phone sync'd
Put your phone into bootloader and then connect to pc via usb. At bottom of screen the text should change from 'serial' to 'usb'. Now flash phone by running rom (cooked or stock etc) you downloaded. Put .nbh and ruu file into same folder and then open ruu file and follow instructions.
I severely doubt cooked rom affected activesync.
EDIT
As bonesy said below, you'll need either USPL or HSPL to flash 1.56+ based rom.
Full tutorial or dummies guide to flashing 1.56+ based roms can be found in cRaCKwHoRe's guide. See my signature
Click to expand...
Click to collapse
Well I get it into bootloader no problem but then plug in the usb cable and nada, it says serial. So then I tried starting bootloader mode with the cabe and still nada, it does not even say serial. If I unplug it then it says serial. I have tried both ways to run the RUU Wrapper and I keep getting the usb conncetion error
serial?
Hi, please can you post a screen shot of where it says serial at boot screen?
stoolzo said:
Hi, please can you post a screen shot of where it says serial at boot screen?
Click to expand...
Click to collapse
I cant because I cant use my software that would do that since it wont sync to my computer.
snap shot
just take a snap shot with a webcam or digital camera if you have one.
stoolzo said:
just take a snap shot with a webcam or digital camera if you have one.
Click to expand...
Click to collapse
let me see if this comes thru ok.
turcomora said:
let me see if this comes thru ok.
Click to expand...
Click to collapse
Here yo go. This picture is with me having the device plugged in it charging fine. Then entering bootloader mode. If I unplug then it will say serial. If I dont plug in before then enter bootloader it will say serial still.
thanks
ok, that looks pretty normal,so to recap you fully powerdown the phone by taking the battery out, put the cable into both the phone and pc and the turn on holding volume down and it just sits there?, what happens when you press volume up at this point?
stoolzo said:
ok, that looks pretty normal,so to recap you fully powerdown the phone by taking the battery out, put the cable into both the phone and pc and the turn on holding volume down and it just sits there?, what happens when you press volume up at this point?
Click to expand...
Click to collapse
Only thing I was not doing was taking out the battery. Just tried that and still same screen. Nothing happens when I press the volume up button just stays there.
pc
do you have another pc to try this on to rule out an actual active sync problem?
stoolzo said:
do you have another pc to try this on to rule out an actual active sync problem?
Click to expand...
Click to collapse
Yeah I have been trying on my latop, home pc, and work pc and nothing same result. I have tried different usb cables, os, reinstalling, everything. Only thing I have not tried is flashing via sd card yet.
brick
its sounds like you have a corrupt spl, it is definately worth trying the sd card as it may allow you to activesync but it may then fallover when it reboots and goes into boot mode. This i where user viperbjk (see android dev thread) may be able to help as he has successfully managed to unbrick a phone.
I had this same problem but powering down and simply triggering the and spl reflash resolved it. your problem sounds different though.
Hi all.
I just a got a HD2 today. And the first thing that came in my mind was "Let's go to xdaDev to get a nice custom rom". I downloaded one.
After that I put the usb and try to make it syncronize. And the problem is here : ActiveSync dont reconize the phone. I spent the last 4 hours to google why it shall not work. I tried to unstick option at "Start=>Settings=> Usb to PC" but it dont work. Nothing more after perfoming a hard reset and reinstall ActivSync.
But something is strange : When I go in the bootloader, there is the 3 color screen and the phone Display "Serial" at the bottom of the screen ; and when I start it again with USB plugged, it doesnt display "USB" instead of "Serial" it's just void and if I remove the USB "Serial" is displayed.
Plz help me to make the phone syncronize .
I use Windows XP (no firewall, no antivirus) and an official Orange Rom. My SPL is 1.42.0000. I just hope there is no hardware problem ...
Some news ...
The HD2 isnt detected on 2 other PC (Both Win XP). I managed to syncronize my old Diamond too, and it worked well. Same with a HTC Touch and a Touch Cruise, the 3 ones works.
I also tried to use Bluetooth to get an Activesync connection and this time, it noticed the HD2 but no way to get a synchronization.
Any ideas ?
Try this: goto Settings, Other (Miscellaneous settings), USB to PC, Enable faster data data synchronization. Try to tick and untick the last setting.
It doesnt work . I'm trying to follow a "GoldCard" tutorial to flash to an official HTC rom. Maybe it's Orange operator rom ... But if you have any other suggestion, let me know
I can't believe that it's such a s*** to just connect the last HTC phone to a computer. The tutorial need ActiveSync to get the SD card ID so I will not succes in this way.
Is there another software that can be used instead of ActiveSync ?
Did you flash any rom at all or are you still stock?
If you have flashed already, Have you tried to go back to the default shipped rom using sd card (not goldcard)?
Find the rom that shipped with your device, extract the RUU_Signed.nbh file from it, copy it to your fat32 formatted sd card, rename leoimg.nbh, put card in phone, boot phone with down volume held, hopefully you get the message on the three colour screen saying something like 'press volume up to start' or somesuch.
THis should not only flash the rom, but also fix spl if it has become corruptted(which appart from hardware errors is the only reason i can see that it wouldn't recognise a USB connection)
Make sure it is the correct rom for your phone, though, correct vendor and region id.
I must say if you havent flashed yet it sounds like a hardware fault with teh usb cable/connector
I'm currently running a stock Rom from a french operator nammed "Orange". I haven't flashed anything since ActiveSync just dont want to know anything about my HD2.
Maybe I shall send it back to the seller. That's so frustating ...
If i dont find a way to solve this problem until the end of the day, I will return the phone.
Anyway thx for trying to help me
To me either the cable or the phone is faulty. Try another cable if you have one, if not just have the phone exchanged.
Phoque_You said:
I'm currently running a stock Rom from a french operator nammed "Orange". I haven't flashed anything since ActiveSync just dont want to know anything about my HD2.
Maybe I shall send it back to the seller. That's so frustating ...
If i dont find a way to solve this problem until the end of the day, I will return the phone.
Anyway thx for trying to help me
Click to expand...
Click to collapse
Ah in that case then i'd seriously consider taking it back /sending it back. Especially if you have tried more than one computer, sounds to me like faulty cable or USB socket.
kilrah said:
To me either the cable or the phone is faulty. Try another cable if you have one, if not just have the phone exchanged.
Click to expand...
Click to collapse
You must be right. I tried everything and I never had so much pain with my others HTC to get syncronization
I had the same problem not beeing able to connect to the internet via computer. After playing with the activesync settings on the Computer -> conection settings-> ticking on and off some of the boxes->ok, it worked again.
I have connected to three of these phones ( 2 french 1 english) and no problem whatsoever, everything happens without needing to touch any of the settings...is your pc even recognising that something is being plugged in on the USB?
Have you installed the latest version of activesync?
If you have done all the obvious things and it still does not work, the phone or the cable is defective...It should connect straight out of the box with a standard, un changed version of activesync.
Send it back!
Hello mates,
My i-mate Jasjar doesn't start any longer. Here's how I got here. I tried to flash my jasjar with Crossbow ROM using ROMUpgradeUt.exe but it didn't do anything. So I went into the Country_ID_Error folder on the computer and executed MaUpgradeUt_noID.exe. My jasjar froze after this and everytime I restarted it just hung on the bootscreen that says i-mate.
So I tried using mamaich method using mtty and now I can't even get to the i-mate bootscreen. So nothing just happens when I try to power up the phone (I'm sure the battery isn't dead).
All I can do is just enter the bootloader mode. That is the only thing that I can do that I know.
Please suggest something. I'm lifeless without the i-mate.
Thanks and regards,
Aditya More.
i had this same issue, i task28?'d my device, whatever command that resets the flash structure, then booted into bootloader, and flashed this file:
http://rs507.rapidshare.com/files/184081773/JASJAR_WWE_11353_137_10301.zip
that should fix you up real good, hopefully.
Well thanks a lot. But it doesn't help. It gives me a connection error when everything is fine. USB is connected, ActiveSync USB connection is disallowed.
I forgot to mention, that when I task 28'd my device, nothing showed on the device. It just showed USB at the top and v2.01 at the bottom for ever, which means the task 28 wasn't probably successful or I ain't sure what.
Yeah, I had to ask you how if the above given file will work if the phone is in bootloader mode.
To fill you on more details, my phone somehow strangely starts. I'll explain how.
When the phone is switched off, and when I press the reset button, nothing actually happens, no activities can be observed.
When the phone is switched off and I connect it to the computer via USB, it shows the charging light. Now when I press the reset button with the phone connected to the USB, the charging light goes off and the USB detection sound sounds on the computer and the computer shows "USB Device not recognized". This means the phone started.
But strangely in both the above cases, none of the two lights on the phone indicate anything and display of the phone shows absolutely nothing.
The only thing I can do with the phone now is enter bootloader.
Also, since I compromised so much, is it possible that I can still flash it with WM6? Because going back to WM5 will make me feel miserable.
Thanks.
@cheapusenet:
I tried flashing with that file. It flashed successfully, but the screen is all smudged. I soft reseted the phone too (using reset+two soft keys) but it keeps displaying that same smudged screen.
Good news is it did something.
Bad new is that it didn't make the mate work.
Please help. I'm dying without the phone.
Thanks and best regards,
Aditya More.
is it possible you can get a picture of what screen its showing? I THINK it happened on mine as well, did you let it sit for 10 or so minutes? if i recall the bootscreen was all corrupted but it started into WM5 just fine.
and regarding wm6, i'd attempt to get the device working before you try and get fancy. is the device cid unlocked? mine was and thats what was causing the issues.
Originally Posted by mamaich
if you can enter bootloader - use "task 28 55aa", this would restore DOC to its original layout.
If you cannot - contact service center.
if you didnt run that exact command, it's probably a good idea.
and you could try reflashing that stock imate rom?
This is all that happens.. I have waited for 5 minutes. I'll wait for 20 minutes now.
i waited for 30 minutes.. no go..
yap it did that EXACT same thing to mine.
reflash it, i think that fixed mine.
if that doesnt work, attempt flashing some custom roms.
is it CID unlocked?
i flashed it twice.. no go..
what's CID unlocked?
CID
Read the Wiki on my sig link
cid unlock allows flashing of roms that don't match your device branding.
i don't remember what brought me back from that, i may have flashed a custom rom with the imate cid settings in it? i don't remember.
i'll post a rom that i think may have helped in a few hours, I have slow upload speed. until then, just keep tinkering.
also, you should only be flashing nk.nbf. not the ms, or radio nbfs.
http://milfweed.info/UNI_AKU3_2_WWE_IVAN_beta_4_extrom_public.rar
try that rom.
hey man.. Flashed the rom with Ranju's ROM of WM6.1.. it worked.. But I can get the phone to be turned on. i mean device turns on but I can't make or receive calls or text. Let me check the thread of that rom. Thanks a ton for your support. Really appreciate it.
HI,
I just had this problem and I saw that a ton of others had it too. It was where my phone would stop at the windows screen and not boot, and my PC wouldn't read the phone so I couldn't load a new rom or Hard SPL. How I fixed it was by getting my phone into bootloader mode, (the multi colored screen). Here's how to do it.
While phone is Off:
Hold Volume down & press power button
While phone is On
Hold Volume down & press Reset Button (meaning the little yellow button by the battery that you have to press with a pen to soft reset it)
Once your on the bootloader screen, plug your phone into your PC, you will hear the ding that the computer recognized it but your Windows Mobile desktop software will still say your not connected, don't worry about that,, you are connected. After that, just pick whatever rom you want, then just install it like normal. and it works. If your not running a rom, do the same but install hard SPL instead of a ROM.
I hope this helps,
As long as your phone turns on at least to the opening screen there is hope.
kn0t.
i had that problem, my phone was stuck on stock together splash screen, but I just called up tmo and they have sent me a new hd2.
Three words. I LOVE YOU! well not really since I'm not gay ha!
By the way This also works for the HTC Imagio!
can someone help me ! i have the same problem. im not sure i can even open the bootloader menu . when i reset it ,it still goes 3 colours. when i try puting a new rom on it it comes up error 262. tried task29 but still error 262. tried reinstalling activesinc , still error 262,something is telling me to sign into my comp as admin but ... can anyone help?
waigstar said:
can someone help me ! i have the same problem. im not sure i can even open the bootloader menu . when i reset it ,it still goes 3 colours. when i try puting a new rom on it it comes up error 262. tried task29 but still error 262. tried reinstalling activesinc , still error 262,something is telling me to sign into my comp as admin but ... can anyone help?
Click to expand...
Click to collapse
Ok first off what ROM do you have and what SPL does it show when you are in the muticolor bootloader screen? Secound if you are trying to flash a ROM yse right clicking the .exe file and selecting run as adminastrator is a good idea. l
I had the same problem.. what usually helps for me is when it gets stuck.. pull out the battery and give it a solid 15-20 minutes.. and then turn it on and do nothing up until after it has booted
i do the battery thing but i cant go on doing this , i put a little txt or phone call and the phone goes bonkers and heats up,nightmare!
ok on the tri colour screen it says
PBB110 HX-BC
SPL-S.08.0000 8G XE
MICRO(LED) 0X05
MICROP(TOUCH)
SERIAL
AH!! just got into the boatloader screen !! by pressing volume up and down together~! rest it! but i need to wait cos ive pulled the battery again!!!
I am having the same issue. I had a android rom then was finally able to flash via sd the stock rom, but it would just freeze on splash screen when trying to boot. Now when I try to flash rom again it will start and freeze on 1%. Any suggestions?
Now when I try to load rom via usb it starts and then freezes on 1%. Then will say communication error and then when trying to boot phone it says software issue and now I cant even get a rom put back on! Please help lol
stormohio said:
Now when I try to load rom via usb it starts and then freezes on 1%. Then will say communication error and then when trying to boot phone it says software issue and now I cant even get a rom put back on! Please help lol
Click to expand...
Click to collapse
Ok try going to windowsmobile.com/getstarted and download and install the latest version of ActiveSync or Windows Mobile Device Center (WMDC) , wich ever one you have to have for your computer, and install it on your computer as they have updated USB drivers for your HD2.
have you tried loading a rom from the root of your memory card LEOimg.nbh?
i have this problem too...but what is worse is after i went to splash screen and connect my phone to pc, my pc wont detect my hd2...so i cant flash a new rom...
ps : im on stock rom bought this almost 2 years ago if im not mistaken
melodicstealer said:
i have this problem too...but what is worse is after i went to splash screen and connect my phone to pc, my pc wont detect my hd2...so i cant flash a new rom...
ps : im on stock rom bought this almost 2 years ago if im not mistaken
Click to expand...
Click to collapse
You need to put your phone into bootloader then your computer will recognize it. Hold the volume down button down while you power on the phone and the multicolor bootloader will come up. Next connect your HD2 to your computer via your USB cable. Wait for the Serial in the white bar of bootloader changes to USB and then flash. If you go to the device manager of your computer while you see USB on your phone it should say HTC USB Sync if you want to be assured that you have a connection to flash with.