Related
i want to know if i can keep the stock rom for my epic(Build:sph-d700 eclair.di18, kernel:2.6.29) and add a custom kernel? and which kernel is the best for battery life and speed? tired 2 times and bricked my phone both times. phone is rooted and used the one click root.
juice.ki11z said:
i want to know if i can keep the stock rom for my epic(Build:sph-d700 eclair.di18, kernel:2.6.29) and add a custom kernel? and which kernel is the best for battery life and speed? tired 2 times and bricked my phone both times. phone is rooted and used the one click root.
Click to expand...
Click to collapse
There's a sticky at the top of the forum that lists the custom ROMs and kernels available for the Epic.
I suggest you pick one and try it. If you like it keep it, if not, flash another.
You need to be rooted and you need custom recovery.
Via clockworkmod recovery, you can flash just a kernel to your stock ROM.
hope this helps
has anyone made a video on how to do it the right now on a EPIC? i tried it like 5 times with baby step step2 and it didnt work on DI18
juice.ki11z said:
has anyone made a video on how to do it the right now on a EPIC? i tried it like 5 times with baby step step2 and it didnt work on DI18
Click to expand...
Click to collapse
you need to be rooted. you also need clockwork mod recovery.
then you can flash a different kernel
yeah i have all that and ive watched videos on how to do it on other phones but not on the epic it seems easy but when i do it my phone mess's up! i put the zip in the root of the SD card power the phone off and put into clockworkmod instill the zip and it bricked my phone every time. not sure if im doing it right. thats why im asking if theres a video on how to do.
Do One-click-root, clockwork recovery (both should be done from the computer via USB debug mode) then, power off your epic. Next, Hold Volume Down, Camera Button and Power Button until the clockwork recovery screen pops up(should be green text, not blue which is the stock recovery). If you have the custom kernel already in your SD card, go to Install Zip From Card > Choose Zip from SD Card > (Custom Kernel)
And there you have it.
To flash any rom, you do the same thing
dude i did all that and it doesnt work. it says everything was installed but when i reboot it, it doesnt go pass the samsung.com screen. what kernel works with stock rom DI18??
I've tried both Phoenix Kernel 1.49 as well as Xtreme kernel's 1.0 version. Both work fine. I think you need to flash back to stock rom via Odin and redo the process... you know how to do that right?
i havent changed my rom im using the one the phone comes with i just want a custom kernel thats all! ive reset my phone 5 times in the last 24 hours trying to get this to work! and nothing.
The process is very simple for flashing a new ROM/Kernal, and you seem to have the concept down. You could try restoring to factory, re-rooting through the one-click to ensure it goes through correctly, than try flashing a new kernal then.
Also i know for new roms the first boot takes a while, im not sure how it is for kernals. Also i noticed theres a few different kernals around here, some for 2.1 and some for 2.2. Make sure you are using ones compatible with 2.1 if you are on the stock rom!
yeah i did that i tried babystep and step2 and both didnt work. i dont want to give up! but im over reseting my phone.
Do you get any errors at any point?
Sent from my Android using Tapatalk and Wifi/CDMA
when its installing the zip on other videos i see the yellow bar load till its done but i my phone it starts than big blue letters so up on the screen. and its goes back and it says its done and that it was installed but when o reboot my phone it wont go pass the samsung.com screen
Which kernels have you tried?
Sent from my Android using Tapatalk and Wifi/CDMA
babystep, step 2
I'm sorry but I dont know what babystep and step 2 are. Link?
Sent from my Android using Tapatalk and Wifi/CDMA
http://www.bakedsnackshack.com/source/
Its those kernels. I tried babystep and I too only see the samsung.com splash. Those kernels are probably optimized for baked snack. My guess is they dont play nice with the stock boot animation.
Sent from my Android using Tapatalk and Wifi/CDMA
Try Phoenix 1.49s.
Sent from my Android using Tapatalk and Wifi/CDMA
I'm curretly using xtreme kernal with stock rom, and then setcpu to have it set at 200min 800max... still not getting better battery life though. I think ill try phonex kernal next...
Sent from my SPH-D700 using XDA App
Ok Fellas! just got my phone last night, rooted it installed the stock froyo JK4.
I come from htc desire so my recovery was bit different installed rom manager & got cloworkmod 2.5.1.2.
Downloaded a rom on phone, rebooted into recovery, but this recovery has purplish text instead of green & there is no install from SD. I cant think of any thing at the moment can some one please help, I wanna install some other rom, other than the stock froyo. PLEASE HELP.
You need to install clockwork revory if you go to the rom manager application there will be an option to flash clock recovery right at the top when you open the application hope this claers things up
yep i did sir, but still there is no option to install from sd, it only allows me to install as update.
from teh rom manager im selecting Galaxy S I9000 for clockwork recovery and it successfully downloads and when i press reboot into recovery its still takes me to the purple screen....i think this means that im not able to get into clockwork recovery any help.??
you have to select 'install update.zip' the first time, this will install clockworkmod and then you can proceed.
The problem is your using 3e recovery and cwm will not work with 3e.
To get 2e recovery you will have to use odin and flash a kernel that has 2e recovery, I suggest hardcores kernal as it comes with cwm already , from there you can install what ever custom rom you want using.the update.zip or installing zip from sd.
Sent from my GT-I9000M using XDA App
FuryriderX said:
you have to select 'install update.zip' the first time, this will install clockworkmod and then you can proceed.
Click to expand...
Click to collapse
Hey man as per your instructions i got the clockwork dome thru rom manager and rebooted into recovery. I pressed update and i ran for a bit but then gave an error about the signature of the package and installation aborted. Pls help.
Sent from my GT-I9000M using XDA App
Samdroid_G_S said:
The problem is your using 3e recovery and cwm will not work with 3e.
To get 2e recovery you will have to use odin and flash a kernel that has 2e recovery, I suggest hardcores kernal as it comes with cwm already , from there you can install what ever custom rom you want using.the update.zip or installing zip from sd.
Sent from my GT-I9000M using XDA App
Click to expand...
Click to collapse
Hey man you sound pretty helpful would you direct me in a direction for those recovery files ur talking about and some sorta guide. Much appreciated eh.
Sent from my GT-I9000M using XDA App
the best way to get clockwork working on i9000m (personally i believe)
is to flash the kernel for Speedmod... you should see it in development forum... just flash that kernel with odin
and your recovery will work fine
danial.aw said:
the best way to get clockwork working on i9000m (personally i believe)
is to flash the kernel for Speedmod... you should see it in development forum... just flash that kernel with odin
and your recovery will work fine
Click to expand...
Click to collapse
Hey man thanks alot, do you mind pasting a link here. If you kindly can please and thanks again.
Sent from my GT-I9000M using XDA App
There are a few things i could suggest.
1. Keep your flashing to a minimum if you have the i9000m. There is a high probability that your phone's memory card is defective and you'll ruin it by accessing it more often. Froyo broke lots of bell phones, and being a rom junky means more flash activity. I am on my second phone, but some people are up to their fifth. Flash a good stable rom and dont go too crazy flashing after that
2. download ODIN, and most 3rd party kernels have 2e i think (http://touristinparadise.blogspot.com/2010/11/samsung-galaxy-s-download-speedmod.html) - pretty sure speedmod does. voodoo also does, all kernels can be found in the dev section easily
Just make sure you download the ODIN version of the kernel and not the CWM file, because since you dont have CWM already, you'll not be able to use it.
There is a problem with USB mounting your sd cards on your pc without patching, since you are running a stock 2.2, so you would need the patch unless you go to a 2.2.1 rom
3. 2.2.1 runs nicer than 2.2, but i havent flashed to a JPY because i am paranoid about my second i9000m dying before i get a backup phone . You may want to flash a jpy mod (like doc rambone's, or darky's), but if you have battery life problems flash a different modem, like the JK4 modem used in bell's latest official rom
junooni.1980 said:
Hey man thanks alot, do you mind pasting a link here. If you kindly can please and thanks again.
Sent from my GT-I9000M using XDA App
Click to expand...
Click to collapse
You can find the thread here http://forum.xda-developers.com/showthread.php?t=822756
You can find the instructions here for ODIN http://touristinparadise.blogspot.com/2010/11/samsung-galaxy-s-how-to-install.html
Just read through that all the answers your looking for are there ;p.
pervert said:
There are a few things i could suggest.
1. Keep your flashing to a minimum if you have the i9000m. There is a high probability that your phone's memory card is defective and you'll ruin it by accessing it more often. Froyo broke lots of bell phones, and being a rom junky means more flash activity. I am on my second phone, but some people are up to their fifth. Flash a good stable rom and dont go too crazy flashing after that
2. download ODIN, and most 3rd party kernels have 2e i think (http://touristinparadise.blogspot.com/2010/11/samsung-galaxy-s-download-speedmod.html) - pretty sure speedmod does. voodoo also does, all kernels can be found in the dev section easily
Just make sure you download the ODIN version of the kernel and not the CWM file, because since you dont have CWM already, you'll not be able to use it.
There is a problem with USB mounting your sd cards on your pc without patching, since you are running a stock 2.2, so you would need the patch unless you go to a 2.2.1 rom
3. 2.2.1 runs nicer than 2.2, but i havent flashed to a JPY because i am paranoid about my second i9000m dying before i get a backup phone . You may want to flash a jpy mod (like doc rambone's, or darky's), but if you have battery life problems flash a different modem, like the JK4 modem used in bell's latest official rom
Click to expand...
Click to collapse
Oh crap! really, i think imma sell this phone rite away then, cus coming fro desire im a rom junky. I guess this aint the rite phone from me.
Yeah, there are massive known problems with internal memory on these phones. I'm already on my second, and if i have more issues, i'll be buying the international i9000 from ncix.com. same phone, no internal memory problems.
Hello,
I need some help. I decided to try out a mod while at work today. i tried it out and didnt like it too much and try to restore my last back up that i did before the change. the phone cut off then back on and was stuck on the mytouch 4g screen and has been this way for about 3 hours.i took the battery out and i went to the hboot screen and tried a factory reset and then the rom manager opened up (v3.0.0.5). from there i went to reboot now and it goes back to the my touch screen. idk what to do and i need help. im new to the droid and am unfamiliar with the terms. can anyone help PLEASE. if possible to gtalk me at j.d.louisy.
thisisjay said:
Hello,
I need some help. I decided to try out a mod while at work today. i tried it out and didnt like it too much and try to restore my last back up that i did before the change. the phone cut off then back on and was stuck on the mytouch 4g screen and has been this way for about 3 hours.i took the battery out and i went to the hboot screen and tried a factory reset and then the rom manager opened up (v3.0.0.5). from there i went to reboot now and it goes back to the my touch screen. idk what to do and i need help. im new to the droid and am unfamiliar with the terms. can anyone help PLEASE. if possible to gtalk me at j.d.louisy.
Click to expand...
Click to collapse
calm down take a breather us XDA users got your back, OK take out the battery and put it back in then go to the Hboot ( hold power and volume down) then once you get to the Hboot Settings use volume down to get to RECOVERY (i think its the third one) then once you get into Clockwork Recovery scroll down to (Backup and Restore) click then press (Restore) and then choose your Restore file it usually Year-month-day hope i helped you donate pls if i did
BE SURE TO KEEP THE CHARGER IN!!
p.s. if it turns off while its restoring even with the charger in let it boot into recovery mode and let it charge up a bit
incase you still need help gtalk me [email protected]
and p.s. CWM 3.0.0.5 is for gingerbread only
Certain roms require certain versions of clockworkmod. I don't know if this also applies to restoring from backups, though. Which type of rom did you flash?
If he flashed the add on 3.0.0.5 has ext3/ext4 support. Should be able to flash froyo and TB Rome.
Sent from my HTC Glacier using XDA App
3.0.0.6 supports ext3/ex4 3.0.0.5 only does Gingerbread
Edit: I'm being a dumbass yea what he said was right I'm overly tired and I have to explain to her why I was being a dumbass and trying to flash through fastboot but what I don't understand is why its still stuck at the boot screen
thisisjay said:
Hello,
I need some help. I decided to try out a mod while at work today. i tried it out and didnt like it too much and try to restore my last back up that i did before the change. the phone cut off then back on and was stuck on the mytouch 4g screen and has been this way for about 3 hours.i took the battery out and i went to the hboot screen and tried a factory reset and then the rom manager opened up (v3.0.0.5). from there i went to reboot now and it goes back to the my touch screen. idk what to do and i need help. im new to the droid and am unfamiliar with the terms. can anyone help PLEASE. if possible to gtalk me at j.d.louisy.
Click to expand...
Click to collapse
Three options
Option one: (easiest)
Since you flashed 3.0.0.5 you must flash a Gingerbread ROM, (Which you can download from here ). Make sure to flash the G/apps after you flash the ROM.
Option two:
you can flash a 2.x.x.x Recovery image, or flash 3.0.0.6 via script or manually do it via the HBoot.
Option three:
Flash the PD15IMG and start over from ground one.
thank you so much for the advice and help. i could bang my head on the wall for trying to load gorillasens. i shouldve left it alone. once i get home from work i will give it a try again.
thisisjay said:
thank you so much for the advice and help. i could bang my head on the wall for trying to load gorillasens. i shouldve left it alone. once i get home from work i will give it a try again.
Click to expand...
Click to collapse
Ah. i think i see what happened. You rooted your phone. downloaded Clockwork Rom Manager, then flashed a recovery image (which was version 3.x). then tried to flash a 2.2 ROM.
Okay. so what.....
a common mistake but one that can be avoided by doing a little research.
Clockwork's 3.0.0.5 recovery image is only compatible with Gingerbread (2.3) based ROMs.
Clockwork's 2.x recovery image are only compatible with FroYo (2.2) based ROMs.
gorilla is 2.2 So it's not cannot be flashed by the recovery image you are using.
if that is correct then the text in the recovery image should be orange in color. If that is correct.....If i were in your shoes i'd load CM7 w/ the GAPPS > download CWRM from the markert > scroll to the bottom (all clockwork recoveries) and flash the newest 2.x. then boot into recovery / make sure the text is GREEN, not ORANGE, wipe then flash your GorillaSense.
Can you cite a source, because I've also heard people claim that Clockwork 3 is backwards compatible, but there was no evidence either way...?
How would you go about switching from a 2.2 ROM to a 2.3 ROM? Do you have to backup with CWM 2, then install CWM 3 to install the new ROM? Doesn't make a lot of sense to me...?
Sent from my Nexus One using XDA App
danger-rat said:
Can you cite a source, because I've also heard people claim that Clockwork 3 is backwards compatible, but there was no evidence either way...?
How would you go about switching from a 2.2 ROM to a 2.3 ROM? Do you have to backup with CWM 2, then install CWM 3 to install the new ROM? Doesn't make a lot of sense to me...?
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
3.0.0.5 is not backwards compatible, which is the official 3.x that you download via the Application. 3.0.0.6 which is "beta" flashed via the HBoot is backwards compatible.
It's seriously jacked if you ask me.
to go from lets say CM6 > CM7 one would do a nandroid backup of CM6, then go to CWRM flash the 3.0.0.5 recovery image > boot into recovery and flash the CM7.
now to get back to a 2.2 ROM you have to scroll to the bottom of CWRM app's and flash a 2.x version of the recovery then do your nandroid restore, flash the 2.2 recovery image.
From what i've heard once 3.0.0.6 is finished you can use that for everything.
What a pain...
I'm real sketchy about the Clockwork 3 recoveries for the Nexus, because they've been screwing up partitions (mine included). Has there been any problems with Clockwork 3 on the Glacier?
Sent from my Nexus One using XDA App
danger-rat said:
What a pain...
I'm real sketchy about the Clockwork 3 recoveries for the Nexus, because they've been screwing up partitions (mine included). Has there been any problems with Clockwork 3 on the Glacier?
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
I haven't had any problems with mine. The only problem that was noted was the 3.0.0.5 prior to the official release wouldn't do Nandroid Backups directly from the application. Some were reporting it work work from the recovery image, but mine never did.
and i have a feeling the reason it's screwing with Partitions is this (CM7/CW3.x) is a Ext4 set up. And CM6/CW2.x is a Ext3 set up.
but since it went official the only problem i've seen is people flashing the the wrong recovery for the wrong ROM. People are flashing 3.x because 3 is higher than 2 so they think it's an upgrade and have no clue on the who/what/when/wheres and whys of what its for.
The partition thing is different for the Nexus, because they are cross compatible to a certain degree. I rolled back to CWM 2, but I can still flash CM7 no probs...
It's interesting to note the differences between the two platforms though (Nexus vs Glacier).
Sent from my Nexus One using XDA App
danger-rat said:
The partition thing is different for the Nexus, because they are cross compatible to a certain degree. I rolled back to CWM 2, but I can still flash CM7 no probs...
It's interesting to note the differences between the two platforms though (Nexus vs Glacier).
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
Yea between Google's way of doing thing and HTC, but i'm sure the chip-set has something to do with that. and with the sexy nexi only having 512Mb of memory the factor of tricking the phone to use the SD card has something to do with it i'm sure.
i have the 3.x recovery and i can flash iceglacier which is a 2.2 rom with out any issues. what i can't do is restore my backup from my other phone onto this replacement i just got. i made the backup with the 3.x recovery but i just keep getting stuck at the mytouch bootup screen... gonna try flashing the 2.x recovery and see if it lets me do the restore.
hey there everyone. just giving an update.......phone is still messed up. we tried putting gingerbread on and no go....tried flashing to PD15IMG and starting over. no go, it kept saying that "main version older <bad>" the phone wont go past the htc screen. im going on day 3 and no phone. *sigh* open for more advice. should i just buy another phone?
OMG OMG OMG i fixed it.......thank you for this post http://forum.xda-developers.com/showthread.php?t=957457 i re downloaded the PD(insert file name) and it worked. i broke down in tears. thank you guys sooooo much.
I used the .zip file to restore my mytouch, but now it wont go into Hboot.
I got the same problem and is fixed thanx to this link
http://forum.xda-developers.com/showthread.php?t=957457
now I have to root the phone again
Thank you
Thank goodness someone had this problem
I just ran into the same issue. whew good thing xda is here!!! Thanks fellas
MODS: I am unsure of where to post this so sorry for the trouble.
So I work for Tmobile and love showing off my rooted mytouch 4g in all its glory.
So I requested a warranty exchange and got a TAIWAN VERSION w/ GOOD SCREEN in return. Like Day and Night.
Upon Receiving my warranty exchange phone it was 2.2.1. I attempted the same Visionary Root Process, (however was there some extra file i needed to DL? i forget)
After rooting my new phone, S-Off, I had flashed FAUX stock kernel 0.4.0b.
THEN THIS HAPPENS:
I cant get past the mytouch 4g splash screen. The first logo that appears. It gets stuck or bootloops. I can HBOOT and get into recovery 3.0.0.5
This is all i can do...i already asked for another warranty exchange...but in the meanwhile..how can i fix this problem or what did i do wrong?
ALSO can you backup one mytouch 4g and load it back up on another mytouch 4g with the same sd card? Thanks!
I had this problem with my MT4G when I flashed his kernal. It seems that his kernals are not designed to work with every 4g device. I hope you did a nandroid backup on the device. I was never able to get past the mytouch splash screen with his kernals
Sent from my HTC Glacier using XDA App
Well, at since you can get into recovery there should be a number of things you can do to get your phone to boot.
Download a new ROM to flash, if you are on clockwork 3 then you need CM7.
Clockwork has usb drive ability, turn it on, transfer the ROM then flash.
If you can get into HBoot or Recovery on ANY phone, you're safe. Hell, if you can't get into HBoot, your phone wouldn't even start up since HBoot is basically the equivalent to BIOS.
THE VERSION OF CLOCKWORKMOD RECOVERY YOU USE IS CRITICAL!!!
The version you are using is for Android 2.3 only.
Flash a v2 Recovery with adb or fastboot and reinstall your kernel, or install CM7.
HTC Glacier CM7 41
I am trying to do this. How would I get my comp.to.recognize the devise. Sometimes it says mass storage device detected sometimes not. So I need cm7 rom to b able.to boot?
Sent from my HTC Glacier using XDA App
Tiltpoet said:
I am trying to do this. How would I get my comp.to.recognize the devise. Sometimes it says mass storage device detected sometimes not. So I need cm7 rom to b able.to boot?
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
If you've ever connected it via USB, it should have installed the drivers automatically (at least on Windows). I think the ADB driver only installs if you had "USB Debugging" checked. Mass Storage usually only refers to mounting the SD card; the driver for ADB is different. Look for something like Android Phone or Android ADB Interface in your device manager (again assuming Windows).
If you have ADB set up, try running the adb devices command. If it spits back the serial number of your phone, you should be okay to proceed.
Don't exchange the phone, fix it...
Just use another phone to copy the latest CM7 to the root of your sdcard and flash, if that doesn't work do the same thing with a PD15IMG.zip file to the root of your sdcard, hboot and restore to stock.
I have no problem with someone doing a warranty exchange for a hardware issue, but if you break your phone, don't make someone else pay for it...
i ended up solving the problem by doing what some of you had suggested. I flashed CM7 and WAH-LaH! when the phone got past the splash screen into CM7 i was on cloud 9.
Now What are the benefits of running CM7? as opposed to going back to Sense w/ Faux kernel again?
PLUS
how would i go back to a sense type rom again? would i go back into rom manager and flash a different recovery?
XDA you have been so helpful!
___bonus__also the haptic feedback on this phone was not as strong as my original..though idk if its just me or not..should i call tmobile and stop shipment of the OTHER phone? how is it i have a taiwan version plum W/ good screen?
There are no Sense-based Gingerbread (Android 2.3) ROMs available now ... Best practice its to make a Nandroid backup of CM7 with your installed CWM Recovery, then flash a version 2.x of CWM Recovery to install any Froyo (Android 2.2) based ROM.
HTC Glacier CM7 41
Tiltpoet said:
i ended up solving the problem by doing what some of you had suggested. I flashed CM7 and WAH-LaH! when the phone got past the splash screen into CM7 i was on cloud 9.
Now What are the benefits of running CM7? as opposed to going back to Sense w/ Faux kernel again?
PLUS
how would i go back to a sense type rom again? would i go back into rom manager and flash a different recovery?
Click to expand...
Click to collapse
Good to see it is working.
Its mostly personal preference at this point. Sense on the MT4G is pretty responsive and has some nice features. CM7 has its own tweaks and features. You loose the sense widgets but many can be replaced with alternatives in the market. You gain and loose relative in both ROMs So try out both and decide.
Use ROM Manager app to flash a new recovery. One of the 2. versions, then flash a froyo based ROM.
what about flashing kernels..are those "roms"
is cm7 itself pretty battery efficient? i still downloaded setcpu and set it to 11---.
2.XXX ..u mean like 2.5.1.4 for example..sorry not lookin at the phone atm.
++bonus
i also dl the cynogyn updater or wut not..wut url do i add for themes?
Tiltpoet said:
what about flashing kernels..are those "roms"
is cm7 itself pretty battery efficient? i still downloaded setcpu and set it to 11---.
2.XXX ..u mean like 2.5.1.4 for example..sorry not lookin at the phone atm.
++bonus
i also dl the cynogyn updater or wut not..wut url do i add for themes?
Click to expand...
Click to collapse
Kernels are not ROMs, the kernel is the underlying software of an OS. The kernel talks to the hardware and lets different parts of the OS communicate. Kernels are ROM specific, or Framework specific. A sense ROM can not use a AOSP kernel and vice versa.
CM ROMs can be good on battery, or not. It all depends on personal use and how you set it up.
That is a good recovery to use when flashing sense ROMs.
Not sure about the updater. If it is the one I am thinking, it hasn't been updated in a while. I think it has been abandoned in favor of ROM Manager. CM updater did come in some of his older ROMs, before ROM manager became the norm.
So I can or cannot flash fauxs kernel. I really liked the smartass profile. Also..I'm on cm 7 now...y do I get force closes on my market.
Sent from my HTC Glacier using XDA App
As people have already said, you used the wrong version of clockwork, also, use clockwork to flash a new rom. And make sure you use the right version.
Tiltpoet said:
So I can or cannot flash fauxs kernel. I really liked the smartass profile. Also..I'm on cm 7 now...y do I get force closes on my market.
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
Try fix permissions. If that does not work, do a full wipe (factory reset). If that still does not work, try re-flashing the ROM.
If you flashed a new kernel before you started having issues, this may fix it, or you may need to wipe caches and re-flash the kernel.
Hi guys
Hope you are well. I am trying to flash back HD Revolution 4.1.2 ROM via CWM recovery (Aroma)
During the selection phase, my device hangs up. I assume the recovery is outdated? Not sure.
Where can i find TWRP latest recovery (Flashable .zip)? I have googled, by most of it is dead links?
Or might my problem be something else?
I guess it's just the opposite you probably have a updated recovery for a 4.1.2 ROM
I think the best one to deal with the aroma is this one by Zedomax
http://forum.xda-developers.com/showthread.php?t=1831173
Thanks alot
Yes. That was the case.... installed an older recovery, and it worked...
^^rac said:
Yes. That was the case.... installed an older recovery, and it worked...
Click to expand...
Click to collapse
I'm glad to help you.
Please help me
last time i used N8013 with revolution hd 10.1, till now i tried up new rom on xda but it's not working, its was hand up at samsung logo, and then i tried re setup CMR Download HighOnAndroid v1 ClockworkMod Recovery 6.0.1.1 and then re up rom revolution again, but it till stop at samsung logo, then i find one rom stock on samfirmware KIES_HOME_N8013UEALI3_N8013XARALI3_1081475_REV00_user_low_ship.tar but its has a problem ( factory mode has unabale working) and auto turn off wifi, so i dont know how to turn back my best tab before.
Please help me.
problem with up rom
Hi guys,
Please help me
last time i used N8013 with revolution hd 10.1, till now i tried up new rom on xda but it's not working, its was hand up at samsung logo, and then i tried re setup CMR Download HighOnAndroid v1 ClockworkMod Recovery 6.0.1.1 and then re up rom revolution again, but it till stop at samsung logo, then i find one rom stock on samfirmware KIES_HOME_N8013UEALI3_N8013XARALI3_1081475_REV00_u ser_low_ship.tar but its has a problem ( factory mode has unabale working) and auto turn off wifi, so i dont know how to turn back my best tab before.
Thanks