Database Users

[Q] Rooted Vibrant turning on and off

I just had my phone rooted on tuesday by a friend. It started turning itself off for the first few hours and went back to normal for a day. Last night it started turning itself on and off every minute. I know nothing about phones, can anyone help me?

How did your friend root?
Did they delete system apps?
Did they apply lag fixes?
Perhaps just flash a custom rom. Their better than stock and should fix your issue. I hope they didn't do a lag fix. Disable it if they did.

He did something like holding the power button/volume up/down to get into download mode? That's all i know. He said he didn't remove any of the system apps, or change anything. He added a wifi-tethering for me, that's why he rooted it. I know nothing about phones and computers. I'm out of town for another week so i can't have him fix it, but i need to do something so i can use my phone. Any suggestions?

oh ya, he used ODIN if i remember right

I don't know why he would be using Odin if all he was doing was rooting the phone. Can you get to the web to DL anything? I would try flashing something with clockwork till you can re-flash to stock with Odin. You need to find out what exactly your friend did when he worked on your phone.

Can you adb? I would like to see the log.
Sent from my Bionixed SGH-T959 using XDA App

my phone wont stay on long enough to do anything. When i push the power/up/down buttons at the same time i get a picture of a droid and it says power reset or unknown upload mode

whats adb? I'm a preschooler when it comes to anything computer/phone related

I was getting panic mode/upload when I was messing with eugenes kernals.

intruda119 said:
I was getting panic mode/upload when I was messing with eugenes kernals.
Click to expand...
Click to collapse
As was I, and that's the only time I've seen that screen.
OP, you're friend definitely did more than simply root your phone. Especially if you say he used Odin? There's no reason to use Odin to gain root.
I would recommend you Odin back to stock and start fresh.

is there any way i can do it without Odin? I'm out of town for a week and need my phone

Rom manager / clockworkmod. Just go to the app store (it's free) and download it. Flash the recovery and flash back to stock 2.1 eclair. It should fix it then when you get home just use the one click root method to root your phone. Check the vibrant bible in android dev. to do it, it's really easy to do yourself since it is literally, one click ^_^ Also for the rom of 2.1 I also recommend going to the vibrant bible for that as well. All you have to do is dl rom manager, put the 2.1 rom on the root of your sd (not external sd) then go into rom manager and install custom rom (pick the stock 2.1). It will wipe your data but your phone should be fixed and you can always dl back your apps and import contacts through your gmail account. Hope this helps.

http://forum.xda-developers.com/showthread.php?t=740077
that's eugene's stock 2.1 for vibrant flashable through clockworkmod ^_^

Samsung Galaxy S GT i9000m Recovery

Ok Fellas! just got my phone last night, rooted it installed the stock froyo JK4.
I come from htc desire so my recovery was bit different installed rom manager & got cloworkmod 2.5.1.2.
Downloaded a rom on phone, rebooted into recovery, but this recovery has purplish text instead of green & there is no install from SD. I cant think of any thing at the moment can some one please help, I wanna install some other rom, other than the stock froyo. PLEASE HELP.

You need to install clockwork revory if you go to the rom manager application there will be an option to flash clock recovery right at the top when you open the application hope this claers things up

yep i did sir, but still there is no option to install from sd, it only allows me to install as update.

from teh rom manager im selecting Galaxy S I9000 for clockwork recovery and it successfully downloads and when i press reboot into recovery its still takes me to the purple screen....i think this means that im not able to get into clockwork recovery any help.??

you have to select 'install update.zip' the first time, this will install clockworkmod and then you can proceed.

The problem is your using 3e recovery and cwm will not work with 3e.
To get 2e recovery you will have to use odin and flash a kernel that has 2e recovery, I suggest hardcores kernal as it comes with cwm already , from there you can install what ever custom rom you want using.the update.zip or installing zip from sd.
Sent from my GT-I9000M using XDA App

FuryriderX said:
you have to select 'install update.zip' the first time, this will install clockworkmod and then you can proceed.
Click to expand...
Click to collapse
Hey man as per your instructions i got the clockwork dome thru rom manager and rebooted into recovery. I pressed update and i ran for a bit but then gave an error about the signature of the package and installation aborted. Pls help.
Sent from my GT-I9000M using XDA App

Samdroid_G_S said:
The problem is your using 3e recovery and cwm will not work with 3e.
To get 2e recovery you will have to use odin and flash a kernel that has 2e recovery, I suggest hardcores kernal as it comes with cwm already , from there you can install what ever custom rom you want using.the update.zip or installing zip from sd.
Sent from my GT-I9000M using XDA App
Click to expand...
Click to collapse
Hey man you sound pretty helpful would you direct me in a direction for those recovery files ur talking about and some sorta guide. Much appreciated eh.
Sent from my GT-I9000M using XDA App

the best way to get clockwork working on i9000m (personally i believe)
is to flash the kernel for Speedmod... you should see it in development forum... just flash that kernel with odin
and your recovery will work fine

danial.aw said:
the best way to get clockwork working on i9000m (personally i believe)
is to flash the kernel for Speedmod... you should see it in development forum... just flash that kernel with odin
and your recovery will work fine
Click to expand...
Click to collapse
Hey man thanks alot, do you mind pasting a link here. If you kindly can please and thanks again.
Sent from my GT-I9000M using XDA App

There are a few things i could suggest.
1. Keep your flashing to a minimum if you have the i9000m. There is a high probability that your phone's memory card is defective and you'll ruin it by accessing it more often. Froyo broke lots of bell phones, and being a rom junky means more flash activity. I am on my second phone, but some people are up to their fifth. Flash a good stable rom and dont go too crazy flashing after that
2. download ODIN, and most 3rd party kernels have 2e i think (http://touristinparadise.blogspot.com/2010/11/samsung-galaxy-s-download-speedmod.html) - pretty sure speedmod does. voodoo also does, all kernels can be found in the dev section easily
Just make sure you download the ODIN version of the kernel and not the CWM file, because since you dont have CWM already, you'll not be able to use it.
There is a problem with USB mounting your sd cards on your pc without patching, since you are running a stock 2.2, so you would need the patch unless you go to a 2.2.1 rom
3. 2.2.1 runs nicer than 2.2, but i havent flashed to a JPY because i am paranoid about my second i9000m dying before i get a backup phone . You may want to flash a jpy mod (like doc rambone's, or darky's), but if you have battery life problems flash a different modem, like the JK4 modem used in bell's latest official rom

junooni.1980 said:
Hey man thanks alot, do you mind pasting a link here. If you kindly can please and thanks again.
Sent from my GT-I9000M using XDA App
Click to expand...
Click to collapse
You can find the thread here http://forum.xda-developers.com/showthread.php?t=822756
You can find the instructions here for ODIN http://touristinparadise.blogspot.com/2010/11/samsung-galaxy-s-how-to-install.html
Just read through that all the answers your looking for are there ;p.

pervert said:
There are a few things i could suggest.
1. Keep your flashing to a minimum if you have the i9000m. There is a high probability that your phone's memory card is defective and you'll ruin it by accessing it more often. Froyo broke lots of bell phones, and being a rom junky means more flash activity. I am on my second phone, but some people are up to their fifth. Flash a good stable rom and dont go too crazy flashing after that
2. download ODIN, and most 3rd party kernels have 2e i think (http://touristinparadise.blogspot.com/2010/11/samsung-galaxy-s-download-speedmod.html) - pretty sure speedmod does. voodoo also does, all kernels can be found in the dev section easily
Just make sure you download the ODIN version of the kernel and not the CWM file, because since you dont have CWM already, you'll not be able to use it.
There is a problem with USB mounting your sd cards on your pc without patching, since you are running a stock 2.2, so you would need the patch unless you go to a 2.2.1 rom
3. 2.2.1 runs nicer than 2.2, but i havent flashed to a JPY because i am paranoid about my second i9000m dying before i get a backup phone . You may want to flash a jpy mod (like doc rambone's, or darky's), but if you have battery life problems flash a different modem, like the JK4 modem used in bell's latest official rom
Click to expand...
Click to collapse
Oh crap! really, i think imma sell this phone rite away then, cus coming fro desire im a rom junky. I guess this aint the rite phone from me.

Yeah, there are massive known problems with internal memory on these phones. I'm already on my second, and if i have more issues, i'll be buying the international i9000 from ncix.com. same phone, no internal memory problems.

[q] omg need help. Mytouch 4g stuck on mytouch 4g screen.

Hello,
I need some help. I decided to try out a mod while at work today. i tried it out and didnt like it too much and try to restore my last back up that i did before the change. the phone cut off then back on and was stuck on the mytouch 4g screen and has been this way for about 3 hours.i took the battery out and i went to the hboot screen and tried a factory reset and then the rom manager opened up (v3.0.0.5). from there i went to reboot now and it goes back to the my touch screen. idk what to do and i need help. im new to the droid and am unfamiliar with the terms. can anyone help PLEASE. if possible to gtalk me at j.d.louisy.

thisisjay said:
Hello,
I need some help. I decided to try out a mod while at work today. i tried it out and didnt like it too much and try to restore my last back up that i did before the change. the phone cut off then back on and was stuck on the mytouch 4g screen and has been this way for about 3 hours.i took the battery out and i went to the hboot screen and tried a factory reset and then the rom manager opened up (v3.0.0.5). from there i went to reboot now and it goes back to the my touch screen. idk what to do and i need help. im new to the droid and am unfamiliar with the terms. can anyone help PLEASE. if possible to gtalk me at j.d.louisy.
Click to expand...
Click to collapse
calm down take a breather us XDA users got your back, OK take out the battery and put it back in then go to the Hboot ( hold power and volume down) then once you get to the Hboot Settings use volume down to get to RECOVERY (i think its the third one) then once you get into Clockwork Recovery scroll down to (Backup and Restore) click then press (Restore) and then choose your Restore file it usually Year-month-day hope i helped you donate pls if i did
BE SURE TO KEEP THE CHARGER IN!!
p.s. if it turns off while its restoring even with the charger in let it boot into recovery mode and let it charge up a bit
incase you still need help gtalk me [email protected]
and p.s. CWM 3.0.0.5 is for gingerbread only

Certain roms require certain versions of clockworkmod. I don't know if this also applies to restoring from backups, though. Which type of rom did you flash?

If he flashed the add on 3.0.0.5 has ext3/ext4 support. Should be able to flash froyo and TB Rome.
Sent from my HTC Glacier using XDA App

3.0.0.6 supports ext3/ex4 3.0.0.5 only does Gingerbread
Edit: I'm being a dumbass yea what he said was right I'm overly tired and I have to explain to her why I was being a dumbass and trying to flash through fastboot but what I don't understand is why its still stuck at the boot screen

thisisjay said:
Hello,
I need some help. I decided to try out a mod while at work today. i tried it out and didnt like it too much and try to restore my last back up that i did before the change. the phone cut off then back on and was stuck on the mytouch 4g screen and has been this way for about 3 hours.i took the battery out and i went to the hboot screen and tried a factory reset and then the rom manager opened up (v3.0.0.5). from there i went to reboot now and it goes back to the my touch screen. idk what to do and i need help. im new to the droid and am unfamiliar with the terms. can anyone help PLEASE. if possible to gtalk me at j.d.louisy.
Click to expand...
Click to collapse
Three options
Option one: (easiest)
Since you flashed 3.0.0.5 you must flash a Gingerbread ROM, (Which you can download from here ). Make sure to flash the G/apps after you flash the ROM.
Option two:
you can flash a 2.x.x.x Recovery image, or flash 3.0.0.6 via script or manually do it via the HBoot.
Option three:
Flash the PD15IMG and start over from ground one.

thank you so much for the advice and help. i could bang my head on the wall for trying to load gorillasens. i shouldve left it alone. once i get home from work i will give it a try again.

thisisjay said:
thank you so much for the advice and help. i could bang my head on the wall for trying to load gorillasens. i shouldve left it alone. once i get home from work i will give it a try again.
Click to expand...
Click to collapse
Ah. i think i see what happened. You rooted your phone. downloaded Clockwork Rom Manager, then flashed a recovery image (which was version 3.x). then tried to flash a 2.2 ROM.
Okay. so what.....
a common mistake but one that can be avoided by doing a little research.
Clockwork's 3.0.0.5 recovery image is only compatible with Gingerbread (2.3) based ROMs.
Clockwork's 2.x recovery image are only compatible with FroYo (2.2) based ROMs.
gorilla is 2.2 So it's not cannot be flashed by the recovery image you are using.
if that is correct then the text in the recovery image should be orange in color. If that is correct.....If i were in your shoes i'd load CM7 w/ the GAPPS > download CWRM from the markert > scroll to the bottom (all clockwork recoveries) and flash the newest 2.x. then boot into recovery / make sure the text is GREEN, not ORANGE, wipe then flash your GorillaSense.

Can you cite a source, because I've also heard people claim that Clockwork 3 is backwards compatible, but there was no evidence either way...?
How would you go about switching from a 2.2 ROM to a 2.3 ROM? Do you have to backup with CWM 2, then install CWM 3 to install the new ROM? Doesn't make a lot of sense to me...?
Sent from my Nexus One using XDA App

danger-rat said:
Can you cite a source, because I've also heard people claim that Clockwork 3 is backwards compatible, but there was no evidence either way...?
How would you go about switching from a 2.2 ROM to a 2.3 ROM? Do you have to backup with CWM 2, then install CWM 3 to install the new ROM? Doesn't make a lot of sense to me...?
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
3.0.0.5 is not backwards compatible, which is the official 3.x that you download via the Application. 3.0.0.6 which is "beta" flashed via the HBoot is backwards compatible.
It's seriously jacked if you ask me.
to go from lets say CM6 > CM7 one would do a nandroid backup of CM6, then go to CWRM flash the 3.0.0.5 recovery image > boot into recovery and flash the CM7.
now to get back to a 2.2 ROM you have to scroll to the bottom of CWRM app's and flash a 2.x version of the recovery then do your nandroid restore, flash the 2.2 recovery image.
From what i've heard once 3.0.0.6 is finished you can use that for everything.

What a pain...
I'm real sketchy about the Clockwork 3 recoveries for the Nexus, because they've been screwing up partitions (mine included). Has there been any problems with Clockwork 3 on the Glacier?
Sent from my Nexus One using XDA App

danger-rat said:
What a pain...
I'm real sketchy about the Clockwork 3 recoveries for the Nexus, because they've been screwing up partitions (mine included). Has there been any problems with Clockwork 3 on the Glacier?
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
I haven't had any problems with mine. The only problem that was noted was the 3.0.0.5 prior to the official release wouldn't do Nandroid Backups directly from the application. Some were reporting it work work from the recovery image, but mine never did.
and i have a feeling the reason it's screwing with Partitions is this (CM7/CW3.x) is a Ext4 set up. And CM6/CW2.x is a Ext3 set up.
but since it went official the only problem i've seen is people flashing the the wrong recovery for the wrong ROM. People are flashing 3.x because 3 is higher than 2 so they think it's an upgrade and have no clue on the who/what/when/wheres and whys of what its for.

The partition thing is different for the Nexus, because they are cross compatible to a certain degree. I rolled back to CWM 2, but I can still flash CM7 no probs...
It's interesting to note the differences between the two platforms though (Nexus vs Glacier).
Sent from my Nexus One using XDA App

danger-rat said:
The partition thing is different for the Nexus, because they are cross compatible to a certain degree. I rolled back to CWM 2, but I can still flash CM7 no probs...
It's interesting to note the differences between the two platforms though (Nexus vs Glacier).
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
Yea between Google's way of doing thing and HTC, but i'm sure the chip-set has something to do with that. and with the sexy nexi only having 512Mb of memory the factor of tricking the phone to use the SD card has something to do with it i'm sure.

i have the 3.x recovery and i can flash iceglacier which is a 2.2 rom with out any issues. what i can't do is restore my backup from my other phone onto this replacement i just got. i made the backup with the 3.x recovery but i just keep getting stuck at the mytouch bootup screen... gonna try flashing the 2.x recovery and see if it lets me do the restore.

hey there everyone. just giving an update.......phone is still messed up. we tried putting gingerbread on and no go....tried flashing to PD15IMG and starting over. no go, it kept saying that "main version older <bad>" the phone wont go past the htc screen. im going on day 3 and no phone. *sigh* open for more advice. should i just buy another phone?

OMG OMG OMG i fixed it.......thank you for this post http://forum.xda-developers.com/showthread.php?t=957457 i re downloaded the PD(insert file name) and it worked. i broke down in tears. thank you guys sooooo much.

I used the .zip file to restore my mytouch, but now it wont go into Hboot.

I got the same problem and is fixed thanx to this link
http://forum.xda-developers.com/showthread.php?t=957457
now I have to root the phone again
Thank you

Thank goodness someone had this problem
I just ran into the same issue. whew good thing xda is here!!! Thanks fellas

MOD PLEASE DELETE Thread is of No use

I Think i have bricked my nexus s ......it wont startup and goes to do first setup but force closes....i can access recovery but when i flash a rom it aborts ....only just bought it

U can odin it back to stock. Check out the android dev forums
Sent from my Nexus S using XDA App

afishpie said:
U can odin it back to stock. Check out the android dev forums
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
Please can you elaborate...or point me in right direction......recovery is now only accessible by flashing it first....phone just wont do anything

download a 2.3.3 nandroid backup and restore to it using clockwork recovery
ignore odin.
http://forum.xda-developers.com/showthread.php?t=884093
update to 2.3.3 using http://android.clients.google.com/p...2cf141e6a.signed-soju-ota-102588.f182cf14.zip
or just download CM7 and flash that along with gapps (wipe dalvik/cache/factory)
and your phone is not bricked. the definition of a bricked phone is a phone who cannot access recovery/fastboot/etc.. can access absolutely nothing

Well, he does say that his attempts to flash a rom always abort...
OP, we need more details.
Are you using Clockwork Recovery? Which version? Try an older/newer version...
What ROM are you trying to flash? Have you tried others?
What happens when you try a normal boot? You say you get as far as the first setup screen?
Have you tried a Factory Reset of the phone from within recovery (stock or clockwork)?

distortedloop said:
Well, he does say that his attempts to flash a rom always abort...
OP, we need more details.
Are you using Clockwork Recovery? Which version? Try an older/newer version...
What ROM are you trying to flash? Have you tried others?
What happens when you try a normal boot? You say you get as far as the first setup screen?
Have you tried a Factory Reset of the phone from within recovery (stock or clockwork)?
Click to expand...
Click to collapse
Many thanks to both of you.....for your help .....so much appreciated......i have got past first setup screen after applying a nandroid backup......it finally worked after 5 times trying....but i have stock android recovery but rom manager on phone .....how can i get clockwork mod back as everytime i flash it.....i get to use it for that one instance ans then it returns to stock android recovery

I think it might be okay now ....after titanium said busybox was installed....i dont think it was done correectly.....after downloading busy box from market....recovery seems to be sticking rather then reverting back to android. Just to check....is there anything i should do to check all is well on my phone and also while flashing i think i changed build number from IR to GH (what are the implications of this move? many thanks...phew
EDIT- NO recovery still wont stay....any ideas?

menov321 said:
I think it might be okay now ....after titanium said busybox was installed....i dont think it was done correectly.....after downloading busy box from market....recovery seems to be sticking rather then reverting back to android. Just to check....is there anything i should do to check all is well on my phone and also while flashing i think i changed build number from IR to GH (what are the implications of this move? many thanks...phew
EDIT- NO recovery still wont stay....any ideas?
Click to expand...
Click to collapse
That's normal. See below:
It's normal to lose the recovery after the reboot, the steps to flash the CW recovery needs to be repeated every time you want to access the CW recovery.
This is due the build in protection in 2.3
As some one pointed it out on another topic, the good thing about this is that you'll never lose the stock recovery of 2.3, thus minimizing the chance of a bricked phone.
If you want to the CW recovery to remain permanently, you'll need to rename /etc/install-recovery.sh to something thing else

sano614 said:
That's normal. See below:
It's normal to lose the recovery after the reboot, the steps to flash the CW recovery needs to be repeated every time you want to access the CW recovery.
This is due the build in protection in 2.3
As some one pointed it out on another topic, the good thing about this is that you'll never lose the stock recovery of 2.3, thus minimizing the chance of a bricked phone.
If you want to the CW recovery to remain permanently, you'll need to rename /etc/install-recovery.sh to something thing else
Click to expand...
Click to collapse
Thankyou SOOO MUCH.....you put my mind at rest......can you maybe help me with one other thing.....WHEN I MESSED UP EARLIER i flashed a different rom build.....does this have any negative affect on the phone....my stock rom was a IR something but i flashed a GR or GH something....

menov321 said:
Thankyou SOOO MUCH.....you put my mind at rest......can you maybe help me with one other thing.....WHEN I MESSED UP EARLIER i flashed a different rom build.....does this have any negative affect on the phone....my stock rom was a IR something but i flashed a GR or GH something....
Click to expand...
Click to collapse
No it doesn't. You're fine. The latest is android 2.3.3 with GRI40.
Sent from my Nexus S using Tapatalk

[Q] Installed kernel, phone is f*cked up...

Hey guys,
I've known about this whole modding thingy going on for android phones, and i've decided to give it a shot myself.
I took a backup of everything (copied everything.. didn't use any app for that. not too smart of me..)
Anyway,
I looked around and decided to install Hells Core kernel on my phone, along with Cyanogen Mod.
So after installing the SDK on my computer, unlocking the phone, rooting the phone with SuperSU and Clockwork Mod,
I got to installing the kernel.
I put it on my phone, rebooted into recovery mode, reset all data (dalvik cache and all..)
then I installed the kernel from a zip file I put on the phone, and it all went smoothly.
However, when I reboot my phone - it's all messed up!
The screen is all half yellow, and half is just black - not even text.
In the yellow part, you can hardly tell that it's the first welcome screen - because the text is too big to fit the screen.
Anyway, the whole phone is fk3d up.
I just wanna put it back to the original stock kernel and rom...
How do I do that now?
Thanks a lot guys..
This is urgent >_<

Just flash cm again without doing any wipes. It'll get rid of the kernel
Sent from my Nexus 5

jd1639 said:
Just flash cm again without doing any wipes. It'll get rid of the kernel
Sent from my Nexus 5
Click to expand...
Click to collapse
I haven't got CM on my phone,
and I can't connect it to the computer because it needs get past the welcome screen - which I can't click on any buttons!
****EDIT ****
nvm, I managed to do it
I used android toolkit, and now the computer can access the phone's internal memory.
Thanks!
***** EDIT #2 ******
Nop, doesn't work yet...
when I copy the other kernels zip's, everything seems okay
but when I reboot my nexus to install from the recovery mode, the zip are corrupted - and when I access from my computer it shows they're 0 bytes.
as if nothing was copied..
What can I do ???
***** EDIT #3 ******
Well, managed to get the phone to work!
Not getting anywhere near Hellscore now..
What I did was run 'install zip from sideload', and then from the pc I used 'adb sideload <FRANCOROCKS>.zip', and that worked
Phone's now up and running, installing my apps again.. lol
Scared to change the ROM though.. after all this >_<

capzul said:
I haven't got CM on my phone,
and I can't connect it to the computer because it needs get past the welcome screen - which I can't click on any buttons!
****EDIT ****
nvm, I managed to do it
I used android toolkit, and now the computer can access the phone's internal memory.
Thanks!
***** EDIT #2 ******
Nop, doesn't work yet...
when I copy the other kernels zip's, everything seems okay
but when I reboot my nexus to install from the recovery mode, the zip are corrupted - and when I access from my computer it shows they're 0 bytes.
as if nothing was copied..
What can I do ???
***** EDIT #3 ******
Well, managed to get the phone to work!
Not getting anywhere near Hellscore now..
What I did was run 'install zip from sideload', and then from the pc I used 'adb sideload <FRANCOROCKS>.zip', and that worked
Phone's now up and running, installing my apps again.. lol
Scared to change the ROM though.. after all this >_<
Click to expand...
Click to collapse
Because you did all this the wrong way. Learn and study before flashing anything, it's not about some simple zip flash. that simple zip file can brick your phone if flashed without knowledge.
hells core kernal is not a CM based kernal that's why you got broken screen. there is a separate thread for cm based kernals. do flash a custom rom like Mahdi slimkat etc they offer great features but only after fully understanding what you are doing

hassi4042 said:
Because you did all this the wrong way. Learn and study before flashing anything, it's not about some simple zip flash. that simple zip file can brick your phone if flashed without knowledge.
hells core kernal is not a CM based kernal that's why you got broken screen. there is a separate thread for cm based kernals. do flash a custom rom like Mahdi slimkat etc they offer great features but only after fully understanding what you are doing
Click to expand...
Click to collapse
Well, I flashed the kernel before I put the ROM, so this happened with HC kernel on stock ROM.
:X

you probably flashed the wrong version of the kernel

You did get the CM Version of Hells Core, right?
This happens to me all the time, just reflash the Roms .zip and you'll be fine.

Sorry to say that, but from your comments it's obvious that you messed up with wrong kernel's version and is not a fault of this specific kernel.
Also the zero kb downloads show bad downloads on your side again.
Sent from my ONDA A9 Core4

capzul said:
Hey guys,
I've known about this whole modding thingy going on for android phones,
Click to expand...
Click to collapse
Lol
Sent from my Nexus 4 using Tapatalk