Database Users

Enter Unlock Code on USA Tmobile Tab with No Dialer?

I go the official unlock code and directions from Tmobile, but they assume in the directions that you have a dialer... does that mean I have to hack my Galaxy Tab just to enter in an unlock code...ideas???
Here's the Tmobile USA unlock directions:
"It is very important that the instructions are followed as listed.
If using a T-mobile SIM card:
1. Put in a T-Mobile SIM card.
2. Turn on the handset.
3. Enter: #7465625*638*Unlock Code#
If using a Non T-Mobile SIM card:
1. Put in the Non T-Mobile SIM card.
2. Turn on the handset.
3. Enter the Unlock Code provided by T-Mobile.
Note: DO Not enter #7465625*638*unlock code# with a non T-Mobile SIM card, as this causes the handset to freeze.
If you receive an error message while performing the instructions do not make any further attempts to unlock the handset. Please be aware that if an excessive amount of incorrect attempts are made, the phone will be permanently locked."

The easiest thing for you to do, lucky one, is to get a SIM card from another provider and unlock.
How did you get your unlock code so fast? What did you do? What did you say? Please advice. Thank you.

calin75 said:
The easiest thing for you to do, lucky one, is to get a SIM card from another provider and unlock.
How did you get your unlock code so fast? What did you do? What did you say? Please advice. Thank you.
Click to expand...
Click to collapse
I called Tmobile and told them I was traveling and needed asap... they sent it over via email... I followed your directions and it asked me for the unlock code, I entered it correctly and it didn't work. I got a message saying "unsuccessful". I did this process 3 times and gave up. Any ideas?

leftbrain said:
I called Tmobile and told them I was traveling and needed asap... they sent it over via email... I followed your directions and it asked me for the unlock code, I entered it correctly and it didn't work. I got a message saying "unsuccessful". I did this process 3 times and gave up. Any ideas?
Click to expand...
Click to collapse
It should have worked. Unless they sent you the wrong code.

calin75 said:
It should have worked. Unless they sent you the wrong code.
Click to expand...
Click to collapse
It's weird that it doesn't work and now they want me to talk to the "unlock department".....everytime I get someone from Tmobile support, they think the Tab has a phone/dialer in it...it's almost getting painful!

New Bell Atrix, Need some help.

I have been reading through the posts and I am starting to go blind.
I have a Bell Atrix, and currently I cannot save APN's.
Do I just need to Root to fix this? If so, what is the best way to root?
Any links provided would be great!

wpghtc said:
I have been reading through the posts and I am starting to go blind.
I have a Bell Atrix, and currently I cannot save APN's.
Do I just need to Root to fix this? If so, what is the best way to root?
Any links provided would be great!
Click to expand...
Click to collapse
Is your provider Bell or are you trying to use your Atrix on other network?

I use APN Backup & restore from the market. It worked on my Bell Atrix but I'm not sure if it was rooted first. Rooting isn't that hard if you need to do it.
Hope this helps.

If by your name your trying to use an unlocked Bell Atrix on mts, I couldn't get it to work, returned the phone.

Yes, my provider is MTS Mobility. The phone is from Bell.
The phone is rooted. I have tried APN back up and APN manager.
The funny thing is that i have put in the apn info a hundred times, and last night it saved once. I tried to edit, and it disappeared again.

is there a page with your apn settings you can direct me to? I will try to load it on my device and if it sticks I will send you the APN backup file so that you can restore it to your device.

[Q] Sim unlock codes from tmobile didn't work, can gfree unlock after 3 attempts?

I requested a sim unlock code from tmobile, and I received it. I entered it twice with a non-tmobile sim, and both times, the code was rejected by my my Mytouch 4G.
I'm since asked t-mobile to recheck the code (IMEI was correct). They said they would, but that they couldn't guarantee that they could send me an accurate code.
I understand after 3 attempts, it permanently locks. I have one left.
I understand I could use gfree method to sim unlock. It will take some effort to reflash back to older roms, etc.
If I try a 3rd time and cause my phone to lock out further attempts, will the gfree method still allow me to unlock?
I would rather simply deal with codes, but if I risk permanently blocking the ability to unlock my phone, then I'll give go the gfree route instead of trying again.
thanks

Just flash a stock rooted froyo rom, an run gfree, that's not hard to do.

Afaik gfree doesn't count as an attempt. it is different from receiving an unlock code
Sent from my Kindle Fire using XDA

sbmitschke said:
I requested a sim unlock code from tmobile, and I received it. I entered it twice with a non-tmobile sim, and both times, the code was rejected by my my Mytouch 4G.
I'm since asked t-mobile to recheck the code (IMEI was correct). They said they would, but that they couldn't guarantee that they could send me an accurate code.
I understand after 3 attempts, it permanently locks. I have one left.
I understand I could use gfree method to sim unlock. It will take some effort to reflash back to older roms, etc.
If I try a 3rd time and cause my phone to lock out further attempts, will the gfree method still allow me to unlock?
I would rather simply deal with codes, but if I risk permanently blocking the ability to unlock my phone, then I'll give go the gfree route instead of trying again.
thanks
Click to expand...
Click to collapse
i can give you a link to buy official unlock code from an eBay seller (which i bought to unlock my MT4G),if i allow to post & if you not use gfree.

ok, figured it out. When the phone was booting up, it was initially asking for my pin on my sim card (i was using a vodafone websessions sim), not the network unlock. Once I entered that correct, I got the network unlock page, and that worked.

priyadharsini - your post reported, spamming by paid unlock sites, not for the first time. I hope this time you'll be banned.

I wonder why those sites are even needed? I will be damned if I would pay for something I can do myself!
Sent from my HTC Glacier using xda premium

jjbadd385 said:
I wonder why those sites are even needed? I will be damned if I would pay for something I can do myself!
Sent from my HTC Glacier using xda premium
Click to expand...
Click to collapse
Amen!

[Q] [HELP] AT&T Galaxy S4 I337 Network Unlock

Can someone give clear instructions on how to Network unlock my completely stock Galaxy S4 I337? I've read all sorts of different methods and none of them have worked. So far, I have tried (unsuccessfully) the following:
- Using the *#27663368378# method, does not do anything
- Using the *#0011# method, does not take me to the UMTS menu
- Using the *#9090# method, does not take me to the UMTS menu
- Using the *#*#197328640#*#* method, takes me to the DEBUG SCREEN in the UMTS menu but Option 6 (PHONE CONTROL) is not there
- Using 'Samsung Service Mode' app method (google search for "samservicemode" it's the first XDA link), takes me to the DEBUG SCREEN in the UMTS menu but Option 6 (PHONE CONTROL) is not there
One thread I saw mentioned that the modem / modem drivers have something to do with the menu options not being there but didn't offer much else.
Is there a tried and true proven method to Network unlock an AT&T 32GB Galaxy S4 I337? My phone's basic info is attached.

Call AT$T and have them give you the unlock code. I did this and was the easiest way.

malikhassaan said:
Can someone give clear instructions on how to Network unlock my completely stock Galaxy S4 I337? I've read all sorts of different methods and none of them have worked. So far, I have tried (unsuccessfully) the following:
- Using the *#27663368378# method, does not do anything
- Using the *#0011# method, does not take me to the UMTS menu
- Using the *#9090# method, does not take me to the UMTS menu
- Using the *#*#197328640#*#* method, takes me to the DEBUG SCREEN in the UMTS menu but Option 6 (PHONE CONTROL) is not there
- Using 'Samsung Service Mode' app method (google search for "samservicemode" it's the first XDA link), takes me to the DEBUG SCREEN in the UMTS menu but Option 6 (PHONE CONTROL) is not there
One thread I saw mentioned that the modem / modem drivers have something to do with the menu options not being there but didn't offer much else.
Is there a tried and true proven method to Network unlock an AT&T 32GB Galaxy S4 I337? My phone's basic info is attached.
Click to expand...
Click to collapse
Check this thread out.....http://forum.xda-developers.com/showpost.php?p=48961319&postcount=3 work for me right away..........as long as u have Root access ( Jortex or Kingo ) both seem worked and install Regionlockaway app from OP.....then reboot.....I tested by switched to T-Mobile SIM CARD .....in and out going call worked.....mms also work.....:good:

ted77usa said:
Check this thread out.....http://forum.xda-developers.com/showpost.php?p=48961319&postcount=3 work for me right away..........as long as u have Root access ( Jortex or Kingo ) both seem worked and install Regionlockaway app from OP.....then reboot.....I tested by switched to T-Mobile SIM CARD .....in and out going call worked.....mms also work.....:good:
Click to expand...
Click to collapse
Is there any sure-fire way without root?

I have had the same problem.
I have not found a way to sim unlock my phone.

The easiest way is to call AT&T and tell them that you will be traveling in Europe and need your phone unlocked. AT&T is generally willing to provide an unlock code in this situation.
If you wish to unlock it yourself, have a look at my post that gives you options when the necessary Samsung menu item appears to be missing. It's not usually missing.. just moved to a different sub menu: How to unlock..
.

I tried following steps and my at&t phone is unlocked. Tried with T-mobile sim as well as international sim.
Possible method to SIM unlock on MK2 *must be rooted*
1. Rooted my s4 on MF3 using following method.
New Root Method for AT&T Samsung Galaxy S 4 (OTA MF3 + Safe update to MK2)
HOWTO:
Use a card reader to format the micro SD card to exFAT (FAT32 or other formats does not work) in Windows. I haven't tried Linux or MacOS X, so they may not work.
Download the attached file (Root_for_ATTSG4_FM3.rar) and extract it into the root of your EXTERNAL microSD card using the card reader in Windows. (You can do the extraction using WinRAR or 7-zip).
Put the SD card back to the phone and download the Android Terminal Emulator app.
Open the Terminal Emulator app and run below 3 commands:
Code:
cd /mnt/extSdCard
./pwn
./script.sh
Then, open SuperSU and check everything looks good.
Then open a root app and it should be working properly.
Reboot your device once to confirm root is still working after reboot.
Come back to the post and press the THANKS button
Click to expand...
Click to collapse
2. Install Recovery using following method. Follow MF3 saferoot method
[RECOVERY LOCKED] Safestrap Recovery v3.71 [2013-12-27 EXFAT Fix]
FOR USERS OF MF3 (TW4.2):
LATEST FILE: Safestrap-JFLTEATT-3.65.apk (updated 2013-11-15)
Main XDA Downloads Page
Mirror 1 (Goo.im): http://goo.im/devs/Hashcode/jflteatt/safestrap
HOW DO I INSTALL SAFESTRAP?
Requirement: Root
Requirement: Allow APK install from Unknown Sources
Download the Safestrap APK
Find the APK using a Filemanager tool and open it on your device, then click "Install".
(If updating from an existing Safestrap you might be warned that this will over-write the existing installation. Click the "Yes" equivalent to this message.)
Once installed, open up the Safestrap application as you would any other app.
Agree to the disclaimer that you won't try to sue me and hunt me down with a rifle if you manage to break your phone..
Then use the "Install Recovery" button. You should see the current version down in the lower left corner of the window. And the "Status:" should say "Installed" when you're done.
From there you can reboot and you *should* see a new splash screen during the boot up. While this is showing you can enter Safestrap Recovery using the [ menu ] button.
That's it for the installation! Read below for a brief overview of Safestrap Recovery v3.x
Click to expand...
Click to collapse
3. Unlocked using following thread. I used method-2 (I flashed modems using safestrap recovery instead of odin)
Possible method to SIM unlock on MK2 *must be rooted*
Method 2 (posted by muniz_ri)
Alternatively, I337 owners can flash the MDL modem via Odin to re-gain access to the hidden menu(links to signed, odin flashable modems below) then follow the guide in the OP to unlock your phone. Once completed you can re-flash the MK2 modem. I tested this process on my own stock i337 running stock MK2 and it works but follow at your own risk. Also, my knox warranty flag has been tripped for a long time so I don't know if flashing the MDL modem will trip the flag or not. Someone else can chime in on that. Cheers:
MDL Modem: https://mega.co.nz/#!wpUUXQCS!Aws3S1...BTVaEvIzcd3t6M
MK2 Modem: https://mega.co.nz/#!pwESna5I!YK7EKG...9t2EdMK9ofgJKg
Click to expand...
Click to collapse
To finish this method go to this thread:
http://forum.xda-developers.com/show....php?t=2285431
*muniz_ri has stated he is not sure whether this will trip KNOX or not*
Thanks to RockRatt and deadlysin9 for letting me know it was safe to just flash modems while on MK2 rooted[/QUOTE]

xisruno said:
Call AT$T and have them give you the unlock code. I did this and was the easiest way.
Click to expand...
Click to collapse
AT&T has strict guidelines on unlocking their phones.
https://www.att.com/deviceunlock/client/en_US/?
I did not pass the requirements.

urtruelove78 said:
I tried following steps and my at&t phone is unlocked. Tried with T-mobile sim as well as international sim.
Possible method to SIM unlock on MK2 *must be rooted*
1. Rooted my s4 on MF3 using following method.
New Root Method for AT&T Samsung Galaxy S 4 (OTA MF3 + Safe update to MK2)
2. Install Recovery using following method. Follow MF3 saferoot method
[RECOVERY LOCKED] Safestrap Recovery v3.71 [2013-12-27 EXFAT Fix]
3. Unlocked using following thread. I used method-2 (I flashed modems using safestrap recovery instead of odin)
Possible method to SIM unlock on MK2 *must be rooted*
To finish this method go to this thread:
http://forum.xda-developers.com/show....php?t=2285431
*muniz_ri has stated he is not sure whether this will trip KNOX or not*
Thanks to RockRatt and deadlysin9 for letting me know it was safe to just flash modems while on MK2 rooted
Click to expand...
Click to collapse
[/QUOTE]
Confirmed working on MK2 i337

fffft said:
The easiest way is to call AT&T and tell them that you will be traveling in Europe and need your phone unlocked. AT&T is generally willing to provide an unlock code in this situation.
If you wish to unlock it yourself, have a look at my post that gives you options when the necessary Samsung menu item appears to be missing. It's not usually missing.. just moved to a different sub menu: How to unlock..
.
Click to expand...
Click to collapse
Called at&t today and they are asking for account number which I do not have. What now?

mbison83 said:
Called at&t today and they are asking for account number which I do not have. What now?
Click to expand...
Click to collapse
If you don't have an account with at&t they are not going to give you a code. Either try the free unlock or buy a code.
Just a heads up on the free unlock, generally if you try it too many times you will be permanently unable to unlock. So if it doesn't work the first couple of times give up
Sent from my Nexus 5

jd1639 said:
If you don't have an account with at&t they are not going to give you a code. Either try the free unlock or buy a code.
Just a heads up on the free unlock, generally if you try it too many times you will be permanently unable to unlock. So if it doesn't work the first couple of times give up
Sent from my Nexus 5
Click to expand...
Click to collapse
The free way does not work for me as I am not able to access the Phone Control feature (possibly because of the 4.4.2 OS which I have heard has some features to prevent users from unlocking a device).
I am having the previous owner and at&t customer to call and request the code. Will know whether they will release the code in 48 hours.
If that doesn't work I will have to buy a code. Any recommendations?

I have used cellunlocker.net many times and couldn't be happier (except for the price lol)
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app

Help
I have a smiler problem but not the same I accidentally hit the option 1 debug screen in the service mode on the the same device (s4)active and it cleared the entire menu and now it won't read any sim and there is no mobile network to be found and all I get is a circle with a line in it . Any help would be greatly appreciated

Rooted(Kingo root). Unlocked using Regional lock away. Popped in a Verizon sim that is currently active. But no signal. I am only getting signal strength. But the good part is that i am not getting the sim unlock anymore. Basically telling me its unlocked.
Now i am trying to get service. I can't even connect to 611. Not sure if i have to flash the radio. Or add to my Verizon acct via imei #
Please help!
Sent from my Portable

helijersey said:
Rooted(Kingo root). Unlocked using Regional lock away. Popped in a Verizon sim that is currently active. But no signal. I am only getting signal strength. But the good part is that i am not getting the sim unlock anymore. Basically telling me its unlocked.
Now i am trying to get service. I can't even connect to 611. Not sure if i have to flash the radio. Or add to my Verizon acct via imei #
Please help!
Sent from my Portable
Click to expand...
Click to collapse
Most likely you have an apn issue. Check your apn and make sure it's correct for Verizon
Sent from my Nexus 5 using XDA Free mobile app

jd1639 said:
Most likely you have an apn issue. Check your apn and make sure it's correct for Verizon
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Where do i start? Apn?
Sent from my Portable

helijersey said:
Where do i start? Apn?
Sent from my Portable
Click to expand...
Click to collapse
Go to settings, wireless &.networks, more, cellular networks, access point names. Google Verizon apn settings for the correct settings.
Sent from my Nexus 5 using XDA Free mobile app

Ty! JD1639 i got the apn setting and created a new apn saved. But never saved, tried twice. Is there something i am missing?
Sent from my Portable

helijersey said:
Ty! JD1639 i got the apn setting and created a new apn saved. But never saved, tried twice. Is there something i am missing?
Sent from my Portable
Click to expand...
Click to collapse
It's been awhile since I edited a vpn but I remember I had the same issue. After you edited a line did you save it? There are three dots in the upper right hand corner of the phone, press them. The save option is in there.
Sent from my Nexus 5 using XDA Free mobile app

OEM unlocking is grayed out

for some reason my OEM is grayed out so i cant unlock the bootloader so can someone tell me why that is?

kc02141994 said:
for some reason my OEM is grayed out so i cant unlock the bootloader so can someone tell me why that is?
Click to expand...
Click to collapse
I had that problem before and I downgraded with MSM tool to an earlier stock ROM then it allowed me to use the switch. Do you have a T-Mobile phone or an international cuz it happened to me on a t-mobile version.

DaveIsHome said:
I had that problem before and I downgraded with MSM tool to an earlier stock ROM then it allowed me to use the switch. Do you have a T-Mobile phone or an international cuz it happened to me on a t-mobile version.
Click to expand...
Click to collapse
T-Mobile

This means you have a T-Mobile version of the phone.
You can only unlock the bootloader on T-Mobile if
a) You have completely paid off the phone on T-Mobile's network (if you used financing) and have used it on the network for 40 days.
XDA has made an article to root on T-Mobile's network.​
OR
b) You are on Android 9.0.11 or lower.
Follow this method to convert to an international ROM of OxygenOS, then root the phone like a normal OnePlus 6t​
NOTE: BOTH METHODS WILL COMPLETELY WIPE YOUR PHONE!
Make a BACKUP with OnePlus Switch and save it to your computer before doing this if you don't want to loose data.

realnickpdx said:
This means you have a T-Mobile version of the phone.
You can only unlock the bootloader on T-Mobile if
a) You have completely paid off the phone on T-Mobile's network (if you used financing) and have used it on the network for 40 days.
XDA has made an article to root on T-Mobile's network.​
OR
b) You are on Android 9.0.11 or lower.
Follow this method to convert to an international ROM of OxygenOS, then root the phone like a normal OnePlus 6t​
NOTE: BOTH METHODS WILL COMPLETELY WIPE YOUR PHONE!
Make a BACKUP with OnePlus Switch and save it to your computer before doing this if you don't want to loose data.
Click to expand...
Click to collapse
looks like ill have to pay off the phone first

I think this should solve your problem just scroll down til you dins sim lock
https://forum.xda-developers.com/oneplus-6t/how-to/op6t-collection-unbrick-tools-t3914746

realnickpdx said:
This means you have a T-Mobile version of the phone.
You can only unlock the bootloader on T-Mobile if
a) You have completely paid off the phone on T-Mobile's network (if you used financing) and have used it on the network for 40 days.
XDA has made an article to root on T-Mobile's network.​
OR
b) You are on Android 9.0.11 or lower.
Follow this method to convert to an international ROM of OxygenOS, then root the phone like a normal OnePlus 6t​
NOTE: BOTH METHODS WILL COMPLETELY WIPE YOUR PHONE!
Make a BACKUP with OnePlus Switch and save it to your computer before doing this if you don't want to loose data.
Click to expand...
Click to collapse
Actually, there is a guide in this forum to sim unlock, and unlock the bootloader without waiting for TMobile to unlock the sim, and you don't even have to get the unlock code for the bootloader.
https://r.tapatalk.com/shareLink/to...5&share_fid=3793&share_type=t&link_source=app
Sent from my ONEPLUS A6013 using Tapatalk