I want to ask can a kernel cause a screen disorder?
Why am i asking this (according to myself, stupid) question?
Because when I flash HCDR.Jacobs v4.1 or v4.2 kernel on any ROM it causes the screen to flicker and screen becomes snowy while turning on. And when i flash any other kernel, problem disappears.
And, by jacob, that kernel can be flashed to any ROM.
P.S. Can you tell me whats the best kernel according to you for wildfire (include link to the kernel thread please)?
Which ROM are you using?
If you are using CM7, stick with the stock kernel included in it. (nFinity by arco). It's the best one IMO, because arco has optimized it a lot for the Wildfire.
Jacob's kernel v4.2 may cause stability issues because it is clocked at 768MHz OC by default, and, many Wildfire's hang or are unstable at that speed. It's unlikely though why its happening in v4.1, but, in any case, its highly recommended to stick with the CM7 stock kernel as stated.
If for any other ROM, use this one. It's the same as arco's nFinity and Jacob's kernel, but, modified a bit to run on other ROMs
http://forum.xda-developers.com/showthread.php?t=995301
Is there a WF kernel that supports WiFi N?
Since I saw that that one had it disable.
Thanks 3xeno and nejc121.
but, whats wifi N?
im using CM7
I m sry ...by I want to knw what is kernel what's its work????
Sent from my HTC Wildfire using XDA App
jagamohan1993 said:
I m sry ...by I want to knw what is kernel what's its work????
Sent from my HTC Wildfire using XDA App
Click to expand...
Click to collapse
Kernel is something like a bridge between the hardware and software to communicate with each other. Eg: oc kernel allows overclocking.
Sent from my HTC Wildfire using XDA App
hey, whats wifi n mode?
Wifi N is a type of wifi networking.
The WF doesn't have support of it afaik.
Which sucks, because my home wifi is n <-<
nejc121 said:
Wifi N is a type of wifi networking.
The WF doesn't have support of it afaik.
Which sucks, because my home wifi is n <-<
Click to expand...
Click to collapse
Thats funny as I'm connected to a WIFI N @150Mbps, which I find strange as the device isn't supposed to be capable of it.
I'm having problems at home, I need to use a pos app >-<
That sucks.
nms247 said:
Thats funny as I'm connected to a WIFI N @150Mbps, which I find strange as the device isn't supposed to be capable of it.
Click to expand...
Click to collapse
Which rom and which kernel are u using.
Have u manually added the network or does it detect automatically.
Sent from my HTC Wildfire using XDA App
Did you have to adjust any settings to make it work? :/
N overclocking means???
Sent from my HTC Wildfire using XDA App
We're talking about a wifi connection type, not overclocking...
Related
First, I would acknowledge the great work HCDR has done !
With that done, I would like to resolve some of my doubts.
I just flashed CM7 and then 4.1 kernel of HCDR.Jacob.
SetCPU allows me to set max CPU speed of 768.. I keep it at 691 with on-demand scaling, but it automatically reverts back to 591 over a period of time.
Can anyone tell me why this happens ?!
Also, any insight on how this modes work would be appreciated.
If I want to manually want to force my phone to operate at a certain speed, how do I do that ?
Thanks,
P
If u are using CM7 why are using SetCPU?
CM7 has it's own OC settings features.. settings>> cyanogenmod settings>>>performance>>>cpu settings
Sent from my HTC Wildfire using XDA Premium App
Why are you flashing HCDR kernel? It's not necessary to do that anymore in CM7.
arco68 said:
Why are you flashing HCDR kernel? It's not necessary to do that anymore in CM7.
Click to expand...
Click to collapse
Thanks. I did not know that.
Is there anyway, I can revert back to original CM7 kernel. Coz I already flashed that kernel. Does it even make a difference ?!
One more thing, what CPU governor should be chosen ?!
I would want my phone to be auto-OCed when I play games but DCed when idle.
Would "on-demand" be a good choice ?! Or "smartass" is better ?
pulz said:
Thanks. I did not know that.
Is there anyway, I can revert back to original CM7 kernel. Coz I already flashed that kernel. Does it even make a difference ?!
One more thing, what CPU governor should be chosen ?!
I would want my phone to be auto-OCed when I play games but DCed when idle.
Would "on-demand" be a good choice ?! Or "smartass" is better ?
Click to expand...
Click to collapse
smartass. its smart.
Eddster3000 said:
If u are using CM7 why are using SetCPU?
CM7 has it's own OC settings features.. settings>> cyanogenmod settings>>>performance>>>cpu settings
Sent from my HTC Wildfire using XDA Premium App
Click to expand...
Click to collapse
In CM7 RC2 this option is not available. This is why i using setCPU app too.
Hi, what's the best kernel for NAND Desire HD Build?? Rafpigna 1.9OC have overclock issues. What's the best and how to install it?? THANKS!!
Overclock issues like what? I hope you don't think overclocking to 1.9 is safe, or will make your device work properly. If you overclocked to say 1.2/3 You should be okay. If you overclock to anymore than that you're bound to run into problems. If even when you overclock to 1.2/3 and you face issues, or even 1.1, then your HD2 has problems. Either way, the HD2 wasn't meant to get extreme overclocking as it even heats up when it is capped at 1ghz.
@ kailkti..
1.9 is just version number...you can overclock most to to 1536 mhz or something like that..i personally keep it at 1190..its perfectly stable..as for best kernel..two kernels stand out rafpignas and tytung..i would choose tytungs r10 or r9...
yes, 1.9 is version number. Rafpigna's kernel have the event number issue, which cause randomly high cpu usage and lags. With tytung kernel i have reboot loop at htc bootanimation. I use Stock Desire HD Rom by EFyodor.Actually with MDJ's Kernel v10.4OC but have some bugs. Any idea for get working tytung or another good kernel to try??
And at what clock speed do you experience these laggs and what not? As I said, if you experience them at 1.2ghz then your phone has a bad processor, or you need an non undervolted kernel, if it happens when you go above 1.2 ghz then it is expected to have problems since these are not "safe" speeds. If you have it even when at 1ghz then more than likely it's your phone or you again need an non undervolted kernel.
Note however i think you need to clarify on what the "laggs" and "bugs" are that you speak of. Because you have to remember, any sense rom uses up more resources, hence operating more slow than other roms, which might be the cause for your "lagg", which is experienced by anyone who uses sense.
If you are talking, saying random reboots, 1 min lagg, or so and you have not done anything or is running anything, then you might want to look for a kernel which isn't undervolted. If the same still happens, then it is your processor.
Roms with Tytung kernels face bluetooth issues... i have used many 2.3.4 roms with tytung kernals ... can any one suggest any other kernel for sd roms also? I have tried rafpigna also but in that mobile connection is not stable...
Sent from my HTC HD2 using XDA App
No problem here on tytung r10
Sent from my HTC HD2 using XDA App
Same here, tytung r10 is working great for me
Yes, tytung r10 is very good. But i can't install. I have reboot loop at htc logo. How to make it working?
abhi2889 said:
Roms with Tytung kernels face bluetooth issues... i have used many 2.3.4 roms with tytung kernals ... can any one suggest any other kernel for sd roms also? I have tried rafpigna also but in that mobile connection is not stable...
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
if you were SD i'd suggest the ACA kernel. we've just about figured out the bt issues as far as i can tell now.
here at some point i'll release the updated ACA kernel for full NAND use.
I had try to use Kernel GL_Core v11 uv and R1.9
Kernel GL_Core v11 is better for me
I am using Boyppc desire hd v14
ricky886 said:
I had try to use Kernel GL_Core v11 uv and R1.9
Kernel GL_Core v11 is better for me
I am using Boyppc desire hd v14
Click to expand...
Click to collapse
THANKS VERY MUCH!! i want to try this kernel I'm using EFP Stock Desire HD Rom. Which version of this kernel i must take??
Can you Pleae send me the link to download ACA kernel?
Sent from my HTC HD2 using XDA App
Best to try them all and work it out for yourself, happy enough with Rafpigna 1.9 personally.
Please any one provide the download link of ACA kernel...
Sent from my HTC HD2 using XDA App
abhi2889 said:
Please any one provide the download link of ACA kernel...
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
you must download the AmeriCanAndroid Rom and extract from there the kernel.
link to the rom: click me
EDIT: But I don´t thing that this is compatible with an froyo rom.
Deluxestar said:
you must download the AmeriCanAndroid Rom and extract from there the kernel.
link to the rom: click me
EDIT: But I don´t thing that this is compatible with an froyo rom.
Click to expand...
Click to collapse
It is nand capable now and yep good directions.
Ive never tried a froyo rom with it.... Go for it folks.
Sent from my HTC HD2 using XDA App
How to extract kernel from ACA build?... only zimage will be sufficient or will I require anything else??? What about the module files that I need to put in root folder???
Sent from my HTC HD2 using XDA App
abhi2889 said:
Roms with Tytung kernels face bluetooth issues... i have used many 2.3.4 roms with tytung kernals ... can any one suggest any other kernel for sd roms also? I have tried rafpigna also but in that mobile connection is not stable...
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
The best combo of kernel and rom is rafpigna 1.8 oc no sense and hyperdroid cm7 2.0.1 @ 1536mhz. It runs great and every single feature works great, as well as EDGE, 3g, bluetooth, tethering. Everything works great. This is the perfect combo. It runs great but typical os optimizations are REQUIRED to having your phone running epically fast. You will need the right nand partitions etc. I experience absolutely no issues what so ever on that combo, I'm not kidding. Everyone seems to be having issues, and I used to be one of them. Install the latest CMW 3.2.??X? and flash ur partitions correctly then install the rom from sd to nand, install 1.8 oc no sense, restart and everything is 100% perfect. I now wish I could alter the oc code of rafpigna's rom. I know it's possible to run faster. My phone doesn't run hot at all, at 1536mhz for hours and hours on end. This phone could handle 1.7-2Ghz with voltage increase, I GUARANTEE IT. It will just take time and patience.
The raf kernel still has the 60mAh bluetooth drain when used in non-sense builds. The best option for kernel is Tytung r10, until charansingh finishes work on the .37 kernel
Hi,
which Kernel have I to flash to use the BLN Control App on CM7.
The App tells me, that my Kernel is noch compatible...
Thanks!
BLN is already included in Cyanogen 7, by default
Just check inside Settings
I know, but I can not configure a timeout oder night-sleep or something like this... The BLN Controll App has more preferences... Is it even possible to use this?
Its not in cm7.1.0.1 run the 7.1.0 RC. Its more stable anyways.
Or
Use francos kernel in rom manager or drew garens kernel in rom manager. Make sure you wipe delvik before flashing.
Sent from my Nexus S using XDA App
Thanks, but where can I find Kernels in ROM Manager?
With 7.1.0 RC I really can use the Control App? oO
Which phone do you have?
Sent from my Nexus S using XDA App
The Galaxy S i9000
Gotcha. U need to flash a kernel that supports voodoo. For example bali kernel. Im not sure if tht kernel works on cm7 for the i9000.
sent from my Nexus S
Ahh, thanks!
I´ll search for an proper Voodoo Kernel....
Good luck man. If u need more help pm me
sent from my Nexus S
hmm, are there large differences between the available Kernels or I can not go wrong?
For example I fount this one:
http://forum.xda-developers.com/showthread.php?t=1041532&highlight=bali+kernel
or this?
http://forum.xda-developers.com/showthread.php?t=1112908
IceTi said:
hmm, are there large differences between the available Kernels or I can not go wrong?
For example I fount this one:
http://forum.xda-developers.com/showthread.php?t=1041532&highlight=bali+kernel
or this?
http://forum.xda-developers.com/showthread.php?t=1112908
Click to expand...
Click to collapse
If you are looking for a kernel for cm7 be sure to read good the posts, the second one you posted isnt a cm7 kernel. About the first one, it would meet your requerimet of using bln as they say in its features.
i used bali kernels on my tmobile vibrant and everything was peachy. id go with the bali kernel for your galaxy S
Take the glitch kernel v 13 its the best ;D
Sent from my GT-I9000 using Tapatalk
Na bali is better
sent from my Nexus S
I just flashed franco kernel two days ago and i noticed the wifi isnt connecting. Its just dormant. Btw i m on ICS zlspf stock rom
Sent from my GT-N7000 using XDA
What do we do now that we know that...?
I m new and I m just asking for help.
Sent from my GT-N7000 using XDA
coolwolex21 said:
I m new and I m just asking for help.
Sent from my GT-N7000 using XDA
Click to expand...
Click to collapse
Flash another kernel until franco updates his kernel..he might update it very soon
Flash nr 4 instead and wait till nr 6 comes and hope it fixes the issue
or you can flash this in cwm http://forum.xda-developers.com/showthread.php?t=1673072
rilpromen said:
or you can flash this in cwm http://forum.xda-developers.com/showthread.php?t=1673072
Click to expand...
Click to collapse
I just flashed d speedmod using odin. Do i need to wipe dalvik and cache or just do nothing at all.
Sent from my GT-N7000 using XDA
coolwolex21 said:
I just flashed d speedmod using odin. Do i need to wipe dalvik and cache or just do nothing at all.
Sent from my GT-N7000 using XDA
Click to expand...
Click to collapse
Uh buddy...if I'm not mistaken...you're not supposed to flash custom kernels via ODIN.....
Your custom binary count might have just gone up....(i.e., bye bye warranty).
PoisonWolf said:
Uh buddy...if I'm not mistaken...you're not supposed to flash custom kernels via ODIN.....
Your custom binary count might have just gone up....(i.e., bye bye warranty).
Click to expand...
Click to collapse
Chainfire Triangle Away 1.5= Welcome back warranty
Sent from my GT-N7000 using XDA
If i'm not mistaken (correct me if i'm wrong), Franco's kernel is based on the CM9 kernel which has some WiFi issues. I have the same problem as you and i'm using the latest CM9 kernel on ParanoidAndroid.
LordManhattan said:
If i'm not mistaken (correct me if i'm wrong), Franco's kernel is based on the CM9 kernel which has some WiFi issues. I have the same problem as you and i'm using the latest CM9 kernel on ParanoidAndroid.
Click to expand...
Click to collapse
I just flashed the speedmod kernel and everything is fine. The reason i was using franco kernel was because of the overclocking but i think i m gonna do just fine with the 1.4gh.
Sent from my GT-N7000 using XDA
Hi all.
For those with wifi problems under some franco kernel, what do you have under
Settings -> Wi-fi -> Advanced (menu button) -> Keep Wi-fi active??
I used to give never under this option. This morning I have changed it to always and for now my wifi problems went away under franco kernel r3 and KingDroid 2.0 + s3.
Sorry if options don't check accurately. My NOTE wears spanish language.
Regards.
franco kernel, wifi issue still alive
heatfire said:
Flash nr 4 instead and wait till nr 6 comes and hope it fixes the issue
Click to expand...
Click to collapse
I flashed franco kernel r6 and the wifi issue is still alive and the precise issue is the device after installing the kernel fails to obtain IP address , Contacted the developer with this issue and he said its a strange and rare problem to which he doesn't have an answer and I have been working on this from last couple of days, day in day out , there seems to be no solution I could invent nor i could find on this site or any where else. I tried to replace my franco kernel with Abyss kernel and after my phone doesn't boot at all . I am struck .
LordManhattan said:
If i'm not mistaken (correct me if i'm wrong), Franco's kernel is based on the CM9 kernel which has some WiFi issues. I have the same problem as you and i'm using the latest CM9 kernel on ParanoidAndroid.
Click to expand...
Click to collapse
His kernel is not even remotely similar in architecture to the CM9 kernel.
My guess is that it's because he changed the default power management mode during suspend from PM_FAST to PM_MAX - PM_MAX may seem like a great thing, but it tends to make the Broadcom chip wig out and do stuff that often winds up consuming MORE power, not less, in addition to causing all sorts of weird connectivity issues.
Edit: Never mind... In this regard his kernel is behaving just like standard kernels. His wifi_pm tweak does nothing in the current code (it's #ifndefed out by CUSTOMER_HW_SAMSUNG)
I had the same problem which does have a work around. If you manually set up the connection it should work. Use the default values except the gateway IP which was the problem for me. The gateway default needed specifying. But with random reboot on all Franco versions I just went to speed mod. Works flawlessly.
No idea why some people have problems and others don't but for me R5 is the best I have tested. Only one to deliver consistent top notch performance.
Hello guys, i have a doubt about this "TV effect" that appears when i lock the screen or press a button to appear the unlock the screen. So this is some kind of problem? I can change it? That effect appears in Froyo 2.2.9 too.
Thanks for help!
I'm using FroyoPro v25 by Irakkarl
It is not a problem or anything.. You can off the effect if you want in Settings>CM Settings>Display.
Sent from my X8 using xda premium
Dark.Kaiser said:
It is not a problem or anything.. You can off the effect if you want in Settings>CM Settings>Display.
Sent from my X8 using xda premium
Click to expand...
Click to collapse
But on my version of Froyo doesn't have this shortcut only Settings>CM Settings>FroyoPro Settings,Application Settings,Input Settings,Performance Settings, Performance Settings, Sound Settings, User Interface, Spare Parts and Simcard Tool Kit
What doubt? Does it bothers you in some way? Thats a beam ported from CM7 since the froyo you are using is the successor infamous ROM by doixanh.
deedii said:
What doubt? Does it bothers you in some way? Thats a beam ported from CM7 since the froyo you are using is the successor infamous ROM by doixanh.
Click to expand...
Click to collapse
Yes it really bothers me! It's like a damaged screen, can someone help to remove this if this is possible?
Well, you can't turn it off in Froyo ROMs. dx had to do a lot of changes to make it work on Froyo.
You can turn this effect off only in CM7 ROMs, try GingerDX or MiniCM7
infamous, deedii?
Why infamous?
Sent from my X8 using xda premium
Well i downloaded the GingerDX rom but it,s not recognizing my SD Card and shutting down my phone usually! I don't know what i have to do D:
Barone11 said:
Well i downloaded the GingerDX rom but it,s not recognizing my SD Card and shutting down my phone usually! I don't know what i have to do D:
Click to expand...
Click to collapse
Whick kernel are you using? If stock, you may have to do a full wipe and reinstall (redownload if necessary). If you're on custom kernel, you may have to install the addons too. Head to gdx thread for details.
Sent from my X8 using xda premium