Database Users

Kernel problem?

I want to ask can a kernel cause a screen disorder?
Why am i asking this (according to myself, stupid) question?
Because when I flash HCDR.Jacobs v4.1 or v4.2 kernel on any ROM it causes the screen to flicker and screen becomes snowy while turning on. And when i flash any other kernel, problem disappears.
And, by jacob, that kernel can be flashed to any ROM.
P.S. Can you tell me whats the best kernel according to you for wildfire (include link to the kernel thread please)?

Which ROM are you using?

If you are using CM7, stick with the stock kernel included in it. (nFinity by arco). It's the best one IMO, because arco has optimized it a lot for the Wildfire.
Jacob's kernel v4.2 may cause stability issues because it is clocked at 768MHz OC by default, and, many Wildfire's hang or are unstable at that speed. It's unlikely though why its happening in v4.1, but, in any case, its highly recommended to stick with the CM7 stock kernel as stated.
If for any other ROM, use this one. It's the same as arco's nFinity and Jacob's kernel, but, modified a bit to run on other ROMs
http://forum.xda-developers.com/showthread.php?t=995301

Is there a WF kernel that supports WiFi N?
Since I saw that that one had it disable.

Thanks 3xeno and nejc121.
but, whats wifi N?

im using CM7

I m sry ...by I want to knw what is kernel what's its work????
Sent from my HTC Wildfire using XDA App

jagamohan1993 said:
I m sry ...by I want to knw what is kernel what's its work????
Sent from my HTC Wildfire using XDA App
Click to expand...
Click to collapse
Kernel is something like a bridge between the hardware and software to communicate with each other. Eg: oc kernel allows overclocking.
Sent from my HTC Wildfire using XDA App

hey, whats wifi n mode?

Wifi N is a type of wifi networking.
The WF doesn't have support of it afaik.
Which sucks, because my home wifi is n <-<

nejc121 said:
Wifi N is a type of wifi networking.
The WF doesn't have support of it afaik.
Which sucks, because my home wifi is n <-<
Click to expand...
Click to collapse
Thats funny as I'm connected to a WIFI N @150Mbps, which I find strange as the device isn't supposed to be capable of it.

I'm having problems at home, I need to use a pos app >-<

That sucks.

nms247 said:
Thats funny as I'm connected to a WIFI N @150Mbps, which I find strange as the device isn't supposed to be capable of it.
Click to expand...
Click to collapse
Which rom and which kernel are u using.
Have u manually added the network or does it detect automatically.
Sent from my HTC Wildfire using XDA App

Did you have to adjust any settings to make it work? :/

N overclocking means???
Sent from my HTC Wildfire using XDA App

We're talking about a wifi connection type, not overclocking...

Neutrino Rom cannot wake up after a long period of idle

I am currently at Neutrino rom V2.5p2 GT
my phone have some problem that it cannot wake up after a long period of idle, such as EVERYDAY I wake up in the morning but I cannot wake my phone up. I have to pull my battery off and back in to reboot the device. This problem made me fail to receive morning calls for a whole week.
I am using Juicedefender, but not sure if it is the cause of problem.
Since this is the first custom rom I flash and I love Neutrino, but I think stability is a must to me. Are the V2.5p2 EE or V2.2 having a better stability? should I try them? or any patch can fix this problem?
Thank you so much!

same as u with 2.5p2 ee
wait for the next build

Sleep of death as its known, not always rom specific many of us experience it on different roms under different loads under different situations.
There's a few of us trying to track down the underlying problem, but at the moment we are all trying out different things which some work for people and not others
so agreed with the above just wait for the next build maybe that will work for you.

Harrison85 said:
Sleep of death as its known, not always rom specific many of us experience it on different roms under different loads under different situations.
There's a few of us trying to track down the underlying problem, but at the moment we are all trying out different things which some work for people and not others
so agreed with the above just wait for the next build maybe that will work for you.
Click to expand...
Click to collapse
Like i've said in the Neutrino thread - it's a CM7 bug that was present in the original weekly.
Flash the 023 kernel, wipe dalvik, reboot.
023 seems to have fixed the problem for me. Going through a second day without random reboots, sleep of death.
Link to the kernel can be found in the faux dev thread, but it's also in my sig.

I think my phone must be hate custom ROMs because it have SOD for Jokersax and Turl CM9 as well as Neutrino ROM. Did flash some faux kernel but solve nothing. Still running Jokersax CM9 although SOD simply because of ICS. My own opinion, don't try CM9 unless you are ready to stay with it until official release.
Sent from my MB860 using XDA

ko_wei13 said:
I think my phone must be hate custom ROMs because it have SOD for Jokersax and Turl CM9 as well as Neutrino ROM. Did flash some faux kernel but solve nothing. Still running Jokersax CM9 although SOD simply because of ICS. My own opinion, don't try CM9 unless you are ready to stay with it until official release.
Sent from my MB860 using XDA
Click to expand...
Click to collapse
What's your WIFI sleep policy set to?
And just to be 100% sure - do you wipe properly during rom flashing?

xploited said:
What's your WIFI sleep policy set to?
And just to be 100% sure - do you wipe properly during rom flashing?
Click to expand...
Click to collapse
I didn't enable wifi. Just using data plan. The setting for 'Keep Wi-Fi on during sleep' is Always as default.
I'm using N_01.100.00R baseband, could it be the issue? Any baseband recommend to use in Asia?
I follow what Jokersax said, format /system, wipe user data, wipe cache and dalvik cache in CWM. I manage to flash every single ROM and boot normally. Weird.
Sent from my MB860 using XDA

xploited said:
Like i've said in the Neutrino thread - it's a CM7 bug that was present in the original weekly.
Flash the 023 kernel, wipe dalvik, reboot.
023 seems to have fixed the problem for me. Going through a second day without random reboots, sleep of death.
Link to the kernel can be found in the faux dev thread, but it's also in my sig.
Click to expand...
Click to collapse
I am going to flash the 023 for a try. I just flash it in cwm recovery and that will be ok?

OK I have just flashed the 023 kernal, let me test my device for a few days to see whether SOD still exist, thanks!

ko_wei13 said:
I didn't enable wifi. Just using data plan. The setting for 'Keep Wi-Fi on during sleep' is Always as default.
Click to expand...
Click to collapse
I am using the default ATT baseband N_01.77.30P.
But from my experience, the reboot / sleep of death issue is most definitely related to WiFi.
Try setting Wifi sleep to "off when the screen is off" and switching to 023 kernel.
Haven't had any issues with this set up in the last 2 days.

xploited said:
I am using the default ATT baseband N_01.77.30P.
But from my experience, the reboot / sleep of death issue is most definitely related to WiFi.
Try setting Wifi sleep to "off when the screen is off" and switching to 023 kernel.
Haven't had any issues with this set up in the last 2 days.
Click to expand...
Click to collapse
Read from other thread with the workaround solution by installing Load Monitor or Wake Lock to prevent phone to go into deep sleep and fail to wake up. Now my phone run at 216Mhz instead of deep sleep when screen off. So far no SOD experience yet. But don't know how my battery life ink this case. Will update again after more observation.
[edit] no luck for load monitor. Get a SOD after 2 hours. Trying wake lock now. So far 6 hours no SOD. Will keep update.
Sent from my MB860 using XDA
Jokersax CM9 v0.4.1

I flashed the 023 1.3GHz kernal and the SOD disappeared last night!
I think the 023 1.0GHz kernal also work
I will observe for a few more days and report it here

Neutrino V2.6 GT and GT+ comes with 023 Kernel. It might solve the SOD as well. Downloaded. Will try it now..
Sent from my MB860 using XDA

ko_wei13 said:
Neutrino V2.6 GT and GT+ comes with 023 Kernel. It might solve the SOD as well. Downloaded. Will try it now..
Sent from my MB860 using XDA
Click to expand...
Click to collapse
I think the problem is solved with the 023 kernal! 2 days after flashing with no problem even set the wifi to be always on.
I think V2.6 EE version is worth trying since it include the CM7 kernal and claimed to have amazing battery efficient! But the V2.6 version introduced Launcherpro and many changes so I am not going to change it at this point, maybe a few days later.

Can I just flash the V2.6 stock CM7 kernal on my V2.5p2?
where can I find that CM7 kernal???

stainlesteel said:
Can I just flash the V2.6 stock CM7 kernal on my V2.5p2?
where can I find that CM7 kernal???
Click to expand...
Click to collapse
Why would you want the 2.6 kernel on 2.5p2?
For me 023 fixed the SOD issues.
Anyway, if you want to try the 2.6 kernel, download the rom, extract boot.img from the archive and flash it via fastboot, wipe dalvik, reboot.
If i were you, I would switch to 2.6 entirely. Haven't had any SODs in the past 24 hours since flashing.

stainlesteel said:
I think the problem is solved with the 023 kernal! 2 days after flashing with no problem even set the wifi to be always on.
I think V2.6 EE version is worth trying since it include the CM7 kernal and claimed to have amazing battery efficient! But the V2.6 version introduced Launcherpro and many changes so I am not going to change it at this point, maybe a few days later.
Click to expand...
Click to collapse
Flashed V2.6 GT and no SOD so far, but Play Store keep FC. Now revert back to CM9 Jokersax v0.4.1 with wake lock to keep my CPU on when screen off. No SOD for 2 days, but battery only can stay around 10hrs.
Sent from my MB860 using XDA

Oh I found the kernal swaping thread and the problem is solved!

I got is every once in a while with neutrino 2.2

My neutrino 2.6 have a priblem in search and home buttons.

[Q] Changing Kernel from Franco to Trinity

Hi
I am new to this and recently installed franco kernel on 4.3 Jelly Bean. I was wondering how do I change to Trinity kernel from TWRP menu I have installed on Nexus 4. I understand that I need Zip and then from TWRP I can install, but can anyone you has done it advice me?
I am looking for what I need to do in TWRP?
I am looking whether I need to go back to stock Google Kernel?

xthaparian said:
Hi
I am new to this and recently installed franco kernel on 4.3 Jelly Bean. I was wondering how do I change to Trinity kernel from TWRP menu I have installed on Nexus 4. I understand that I need Zip and then from TWRP I can install, but can anyone you has done it advice me?
I am looking for what I need to do in TWRP?
I am looking whether I need to go back to stock Google Kernel?
Click to expand...
Click to collapse
since you are coming from franco kernel, this is what you should do, via your recovery..
after you download what you need, reflash your rom(dont wipe a singe thing), the gapps(if needed), and then trinity kernel. then reboot. if you are coming from any other kernel, you dont need to reflash your rom, just flash the kernel in recovery then reboot

Thanks a lot
So in this case I should just install trinity kernel as I don't have any custom rom installed and no gapps. I hope I am right as all I did was just installed Franco kernel on stock phone and that's it!
Any cache erase etc etc before i flash new kernel?
Sent from my Nexus 4 using xda app-developers app

xthaparian said:
Thanks a lot
So in this case I should just install trinity kernel as I don't have any custom rom installed and no gapps. I hope I am right as all I did was just installed Franco kernel on stock phone and that's it!
Any cache erase etc etc before i flash new kernel?
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
no matter what anyone tells you, you NEVER have to wipe anything when flashing kernels, dont wipe dalvik, dont wipe cache.
well, its best to flash your rom again if coming from franco kernel, it changes your roms ramdisk. trinity grabs the available ramdisk. by reflashing your rom, trinity would grab your roms ramdisk instead of francos. but, most likely youll be fine just flashing trinity on top

Thanks again
When you say ROM, are you referring to stock ROM?
I guess I'm getting confused between which ROM you are asking me to reflash.
Sent from my Nexus 4 using xda app-developers app

xthaparian said:
Thanks again
When you say ROM, are you referring to stock ROM?
I guess I'm getting confused between which ROM you are asking me to reflash.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
stock rom. its aright if you dont reflash, youll be fine.

xthaparian said:
Hi
I am new to this and recently installed franco kernel on 4.3 Jelly Bean. I was wondering how do I change to Trinity kernel from TWRP menu I have installed on Nexus 4. I understand that I need Zip and then from TWRP I can install, but can anyone you has done it advice me?
I am looking for what I need to do in TWRP?
I am looking whether I need to go back to stock Google Kernel?
Click to expand...
Click to collapse
xthaparian, can I ask you to share your experience when you do it?
I'm exactly where you are, stock ROM (4.2.2) and Franco's. It's not that I'm not satisfied with it, just wanting to try alternatives. After being a "ROM whore" with my previous phones I unfortunately didn't have time to do anything with the N4 yet..
Thanks =)
Sent from my Nexus 4

I'll keep you guys updated..
Give me 2 hours
Sent from my Nexus 4 using xda app-developers app

OK here is the update, I never got around to install it because I think there is no 4.3 kernel available as yet. All is see is a kernel for 4.2.2
If I am wrong then someone point me to 4.3 kernel for Trinity
Sent from my Nexus 4 using xda app-developers app

xthaparian said:
OK here is the update, I never got around to install it because I think there is no 4.3 kernel available as yet. All is see is a kernel for 4.2.2
If I am wrong then someone point me to 4.3 kernel for Trinity
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
tf4c http://goo.gl/hONIdT
i do all of trinitys testing, morfic(dev) doesnt have a nexus 4. this is the kernel that we are testing in the thread right now, publicly. the release kernel goes on the website. the test kernels deemed fit for the public ill post in the thread, and/or my social websites. if you cant find the latest, or have any other questions(even not kernel related), feel free to ask, we are very friendly in the trinity thread

Ooh
Installed it from twrp without wiping cache etc and installed good.
But screen flickers like really bad and not at all buttery smooth...
Any ideas?
Sent from my Nexus 4 using xda app-developers app

xthaparian said:
Ooh
Installed it from twrp without wiping cache etc and installed good.
But screen flickers like really bad and not at all buttery smooth...
Any ideas?
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
go to the roms main settings, developer options, force gpu rendering, disable the disable hw overlays if they are enabled. if you dont have a developer options in your main settings, press about phone, scroll down, press build number 7 times. when you get the you are a developer now message, go back to the main settings and go into developer options.
the reason this happens is because you are running stock, which is jwr(build version) and aosp is jss. they are slightly different(some different drivers). this difference cause this. most custom kernels are jss, aosp based. franco kernel is jwr, stock based. this difference does not happen often on a nexus. btw, jss is the newest version of android. the majority of custom roms are also jss.

OK this is what I have done
I have dine as you had told and checked the box that states "disable the he overlays"
This fixed my problem but I hope this doesn't have any other effect ..
How can I install the aosp built instead of jwr ?
Sent from my Nexus 4 using xda app-developers app

xthaparian said:
OK this is what I have done
I have dine as you had told and checked the box that states "disable the he overlays"
This fixed my problem but I hope this doesn't have any other effect ..
How can I install the aosp built instead of jwr ?
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
na, thats how i normally run my phone. there are many aosp builds out there in both development sections, as i said most are aosp. im using rasbean, but there are other good aosp based roms as well

Thanks a lot all!..
this seems to work.
One last thing i like to inquire is that to install the raspberry, they recommend clean wipe and then install gapps and rom. Would this erase my current backup of franco based system image i created in TWRP?
And If I wipe clean, how can I install the raspberry rom ..its all wiped isnt it!!!

Thanks @xthaparian and @simms22, I had already decided to take this weekend to try some stuff on mine, but your tries made me more forward to do it. I must confess of all my past androids N4 is, for obvious reasons, the one which has more releases to try, and ofc a lot of tricks in the way..
Sent from my Nexus 4

xthaparian said:
Thanks a lot all!..
this seems to work.
One last thing i like to inquire is that to install the raspberry, they recommend clean wipe and then install gapps and rom. Would this erase my current backup of franco based system image i created in TWRP?
And If I wipe clean, how can I install the raspberry rom ..its all wiped isnt it!!!
Click to expand...
Click to collapse
rasbean jelly! :silly:
no, your nandroid backup stays, your data gets erased though. its like starting fresh. the storage wont get touched(dont wipe the system). as soon as you log in, go through the google setup, your play store apps should start reinstalling(if you enable it). most roms will jave this or something similar written in the op.

Ok Thanks again..
BTW which gapps should I use!...
i found a link on the internet
http://www.teamandroid.com/gapps/
but simms22 your input shall be the final thing to close the thread..

xthaparian said:
Ok Thanks again..
BTW which gapps should I use!...
i found a link on the internet
http://www.teamandroid.com/gapps/
but simms22 your input shall be the final thing to close the thread..
Click to expand...
Click to collapse
i hear people say these gapps for 4.3 are good, they were recently updated(8/8/13) http://goo.im/devs/paranoidandroid/roms/gapps/pa_gapps-full-4.3-20130808-signed.zip
also, you will need the latest supersu/superuser. heres the flashable supersu http://download.chainfire.eu/345/SuperSU/UPDATE-SuperSU-v1.51.zip

I downloaded all as instructed ..
I am on raspberry
I'm on trinity kernel
Let's see the performance .
One thing I noticed is that this kernel jas all 4 cores running and max is capped at 1024hz.
Also the governor is set to ondemand.
Any thoughts on this. Any other tweaks I should do to make it much better. Franco kernel was using interactive governor.
Also the GPU is ocd to 485 and stock is 400 max.
Any comments to tweak the kernel better or Tue stock setting are good!
Thanks for help
Sent from my Nexus 4 using xda app-developers app

[Q&A] [ROM] [4.4.4] [MAKO] Mahdi-Rom 2.8 [10/01]

Q&A for [ROM] [4.4.4] [MAKO] Mahdi-Rom 2.8 [10/01]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:

Kernels that support Fauxdisplay?
Hello,
I'be been using Mahdi for a long time now and love it. I'd like to test out some other kernels, but don't want to lose the ability to run Fauxdisplay for color correction. Can anyone suggest kernels that support it? Will any kernel with "gamma control" work, or are only some of them specific for use with Fauxdisplay? Thanks!

gsmaciel said:
Hello,
I'be been using Mahdi for a long time now and love it. I'd like to test out some other kernels, but don't want to lose the ability to run Fauxdisplay for color correction. Can anyone suggest kernels that support it? Will any kernel with "gamma control" work, or are only some of them specific for use with Fauxdisplay? Thanks!
Click to expand...
Click to collapse
Most kernels use faux's gamma control, some use Franco's, just read the feature list of the kernel which should be in the opening page of the kernel thread.

Will development of Mahdi ROM stop after kitkat for Nexus 4 or all devices... Heck I wouldn't mind getting a Nexus 5 or OPO just to continue to enjoy Mahdi ROM!

@mahdi always release excelent ROM
great performance,smooth and stability
THANKS..

Hey anyone plzz help .
I am getting random reboots ..
While using the phone the screen stucks and phone reboots after 5-10 seconds .
I am using stock kernel with no modification ..
Sent from my Nexus 4 using XDA Free mobile app

pankajsidana said:
Hey anyone plzz help .
I am getting random reboots ..
While using the phone the screen stucks and phone reboots after 5-10 seconds .
I am using stock kernel with no modification ..
Sent from my Nexus 4 using XDA Free mobile app
Click to expand...
Click to collapse
As someone else also pointed out.. Clean flash and try or else flash a another kernel like Semaphore or any other (wipe cache and dalvik after fishing) and see if it fixes it for you. Without logs there is not much one can do.

TheQuarterMile said:
As someone else also pointed out.. Clean flash and try or else flash a another kernel like Semaphore or any other (wipe cache and dalvik after fishing) and see if it fixes it for you. Without logs there is not much one can do.
Click to expand...
Click to collapse
Ok give me a day. . and i ill report
Sent from my Nexus 4 using XDA Free mobile app

TheQuarterMile said:
As someone else also pointed out.. Clean flash and try or else flash a another kernel like Semaphore or any other (wipe cache and dalvik after fishing) and see if it fixes it for you. Without logs there is not much one can do.
Click to expand...
Click to collapse
I have clean flashed the rom and m using stock kernel... Though the reboots are less .. But still i got one reboot .. Today .. :/
Sent from my Nexus 4 using XDA Free mobile app

Could someone please explain to me why Mahdi is dead?

kurtph1969 said:
Could someone please explain to me why Mahdi is dead?
Click to expand...
Click to collapse
It is just a final build for kitkat as Lollipop is about to come out. If Mahdi got some time to spend, maybe he will be building for Lollipop. All of us hope he will be building for lollipop. Just chill out dude. Enjoy the last version of Mahdi's kitkat till L come out.

i have been using your rom and its great
but sometimes when i took a picture , my nexus 4 just reboot
and sometimes its just randomly reboot when i close an application
i have updated to the latest version but the problem still seem to occur

hadesjr said:
i have been using your rom and its great
but sometimes when i took a picture , my nexus 4 just reboot
and sometimes its just randomly reboot when i close an application
i have updated to the latest version but the problem still seem to occur
Click to expand...
Click to collapse
Are you using stock kernel that comes with the rom or you are flashing other kernels? If so, maybe you undervolted too much.

arffrhn said:
Are you using stock kernel that comes with the rom or you are flashing other kernels? If so, maybe you undervolted too much.
Click to expand...
Click to collapse
i'm using hell doctor kernel and tardis mod
i just flashing and wipe cache+dalvik
the rest is stock cause i am not too undestand about undervolt, so idont change the setting

hadesjr said:
i'm using hell doctor kernel and tardis mod
i just flashing and wipe cache+dalvik
the rest is stock cause i am not too undestand about undervolt, so idont change the setting
Click to expand...
Click to collapse
Hells doctor is like hellscore afaik. The default is undervolted by 100mv. Try raising it a bit.

Can anyone recommend gamma calibration settings as I am trying to get the Nexus 4 colour profile to something like Obsanity or Kel Ghu (Gamma 2.2) profiles.
Gamma settings for changes made within Mahdi Rom I do not want to use other managers or kernels.

ART
Can I switch from Dalvik to ART in this Rom ?
Or can I brick my phone ?

I'm coming from a Vanilla rootbox, 4.2.2, can I install directly this one or I need to install a stock 4.4.2 before?
thanks

Gmail crush
I'm using the latest version of Mahdi Rom and Gmail is crushing every time I try to compose a new email. Gmail app is the latest version.
Any idea how to fix this?

Mr. Watson said:
Can I switch from Dalvik to ART in this Rom ?
Or can I brick my phone ?
Click to expand...
Click to collapse
Art is fine!
/sent from a toilet in a galaxy far far away..

Custom cm12 kernel for trltespr

So as most know we have a multitude of custom lp Roms..... But one thing we are seriously missing and I personally am craving is a custom kernel..... So this is a sort of shout out to any kernel devs or folks who are capable or even folks who are in league with kernel devs....... Our phone should have this......... So.... Having said that....I would request that if anyone is able or knowing or willing... Let's get cracking..... Lol......I do a fair amount of tweaking but kernels in at a loss never put my hands at it so I wouldn't even know where to start...... This is my humble plea that we acquire a custom kernel..... Thanks.....

I am willing to test any kernels that come over to our device!

Undervolting cm12 would be so bad ass. I'm such a nerd. I hope ktoonsez comes around these parts iirc he makes kernels for one of the variants
Sent from my SM-N910P using XDA Free mobile app

Here you go guys: https://s.basketbuild.com/devs/Zion959/L/TRLTEspr/TRLTEspr Zion Kernel
/thread xD

iTzFeRReTTi said:
Here you go guys: https://s.basketbuild.com/devs/Zion959/L/TRLTEspr/TRLTEspr Zion Kernel
/thread xD
Click to expand...
Click to collapse
Been running this all day and its stable. When I mess with the advanced settings slightly less Lol but with stock settings it's very stable. Do your recommend turning on intelliplug? What's the best app to tweak it? Wats ur favorite governor? So many questions and excitement for the custom kernel lol
Sent from my SM-N910P using XDA Free mobile app

hibby50 said:
Been running this all day and its stable. When I mess with the advanced settings slightly less Lol but with stock settings it's very stable. Do your recommend turning on intelliplug? What's the best app to tweak it? Wats ur favorite governor? So many questions and excitement for the custom kernel lol
Sent from my SM-N910P using XDA Free mobile app
Click to expand...
Click to collapse
I have intelliplug on, I use Fauxclock to tweak it and I use the interactive_pro governor!

After flashing 2/18 beanstalk, the kernel caused a graphical glitch and system crash when going to recent apps. Stock kernel is fine. By crash I mean it looks like a boot loop but won't turn back on with a blank screen.
Sent from my SM-N910P using XDA Free mobile app

hibby50 said:
After flashing 2/18 beanstalk, the kernel caused a graphical glitch and system crash when going to recent apps. Stock kernel is fine. By crash I mean it looks like a boot loop but won't turn back on with a blank screen.
Sent from my SM-N910P using XDA Free mobile app
Click to expand...
Click to collapse
Just turn on disable HW overlays in developer options, you're welcome

There have been some kernel and vendor updates based off the lp ota for another note 4 device... I'm wondering if others have not updated their sources... If that's the case this could be the problem

spleef said:
There have been some kernel and vendor updates based off the lp ota for another note 4 device... I'm wondering if others have not updated their sources... If that's the case this could be the problem
Click to expand...
Click to collapse
Are you saying the 2.23 kernel is too old to use with a 3.2 cm build? Also if i heard you right in another thread are you trying to compile unofficial versions of this kernel? @spleef
Sent from my SM-N910P using XDA Free mobile app

Is there still an interest in this?
Sent from my trltespr using XDA Free mobile app

hibby50 said:
Is there still an interest in this?
Sent from my trltespr using XDA Free mobile app
Click to expand...
Click to collapse
Very much so the more custom cm kernels the better... The Zion one is amazing.... If you haven't tried it I would suggest it... If he's updated it to the newest kernel source... Idk....I tried building with it but ran into some errors so I went back to the regular cm based one.... Would love to see more kernel development for us

Kernel source is out

spleef said:
Very much so the more custom cm kernels the better... The Zion one is amazing.... If you haven't tried it I would suggest it... If he's updated it to the newest kernel source... Idk....I tried building with it but ran into some errors so I went back to the regular cm based one.... Would love to see more kernel development for us
Click to expand...
Click to collapse
Yeah, check his basketbuild! He updated it!

iTzFeRReTTi said:
Here you go guys: https://s.basketbuild.com/devs/Zion959/L/TRLTEspr/TRLTEspr Zion Kernel
/thread xD
Click to expand...
Click to collapse
Is it possible for you to make a W8/treltecan build?

That kernel has no booting

Most recent kernel does not boot.
pbedard said:
That kernel has no booting
Click to expand...
Click to collapse
I too can confirm not booting for the March 21st build. I am using the cm12 official 03-12 nightly build.
Thank you spleef for all of your hard work on CM12 and the kernel for it. I have been testing the kernel since you posted it and the march 10th kernel is one I am running currently it is very stable speedy, and has very little problems.

I been using trltespr cm12 and the only issue I've stumbled was the heating issue near the back camera and the gaming peformance heats my phone excessively. Is there a possible way to port or install the OE1 stock kernel?