[Q] Problems with HD2 (Android) - HD2 Android Q&A, Help & Troubleshooting and Genera

Since this week I have a really big problem with my HD2.
November last year I started to install Android on my HD2, first on the SD card and then finally on the Nand (everything went well). Last week I installed one of the latest version and working just fine for one week it stagnated. I had to remove the battery, because nothing worked anymore. After that I got only the white starting screen with HTC and then nothing…
First I run Task29 and flashed it, HSPL, Radio, MAGLDR and then ClockworkMod Recovery. The result was that sometimes the white HTC starting screen popped up, tough I kept the power button pushed down, and sometimes I could enter the MAGLDR. If I finally got into the MAGLDR and tried to recover a backup or try to do a fresh/new install. I formatted the SD with the Panasonic SDformatter, but it didn’t had any effect. Finally I flashed the HD2 back to WM6.5 and the HD2 start working again (not very well). After this I tried to install Android on the SD card, but now the HD2 keep stagnates in the white HTC starting screen and nothing else works..
ROM: Boyppc Ginger 2.3.4 HoneyComB V27, with 150Mb system partition and an 1Gb ext2 partition on the SD card.
Is this a software or a hardware problem? Or both?
Can somebody please help me, because I have no clue how to repair this???
Best regards,
Janha,

Related

[Q] (Q) touch screen trouble...

i have a tmous hd2.
after installing MAGLDR 1.12 i flashed DFT WM7 to try it out. it was nice but i was having sd card issues so i then flashed NexusHD2-Gingerbread_V2.0 NAND. i was having some trouble with the unlock screen freezing when waking up. hitting the power button a few times seemed to help. then the touch screen stopped working all together. i bought a new sd card for WP7 so i flashed DFT WP7 again, still no touch screen. i flashed a WM6.5 Energy rom, still no touch screen. But i did notice that in the rainbow boot screen while flashing WM6.5, now i cant remember everything exactly, the something {touch} value was N/A. i have been search tooling here for a couple of hours now, starting some googleing, but if anyone has some suggestions/ideas/threads to be directed to i would appreciate it.
*edit ran task 29 and flashed official tmous stock rom. still no touch screen!!
Think I found a solution for 3rd step, I used h**ps://wiki.ubuntu.com/Win32DiskImager to "write" img to bigger card, so far so good. WP7 sees 3.8gb, and I've got around 4gb for android in FAT32...
Booted Darkston superRAM 1.5 from sd

Nand issue

There was obviously a serious error with one of my phones. I tried everything, task 29, etc. The phone just would not take wph7 completely, but i knew for a fact that the sd card is compatible, but i tried to install wp7 without a sd card. The phone would never get past the first wph screen (after the dft splash screen). Sometimes the phone would not even get to the windows "getting started" screen, sometimes magldr would even hang up, or the pc could not even initialize the partitioning process to install wp7 (still hung at the "USB Flasher mode" prompt). I was ready to send the phone to HTC since I thought there was a problem with the internal memeory.
I then decided to start from scratch: restore the phone to stock(flashed stock rom from sd card, spl2.080000), reset the device once, and then loaded magldr while the phone was synced to my computer(not tri collered screen), then immediately flashed wp7 to the phone.
All is well now.
I think task 29 maybe did not errase the internal memory completely.
Alsu, Radio 2.12.xx.xx works wonderful, and it also gave me a huge improvement in battery life!
No offence but exactly what is the point of this post? And seriously, you were having trouble FLASHING WP7 to your HD2 so considered sending it back to HTC? Dude they would just laugh in your face, flashing voids your warranty.
Why label the thread "NAND Issue" as well, when by your own admission you have no issue at all? Baffling.
This was supposed to be helpful for other people, I have plenty of experience with flashing numerous HTC devices, and own several HD2's. This one had serious trouble taking on wp7, so logically tere was some issue with the internal memory. Flashing the HD2 the other conventional ways (as I flashed the other HD2's) did not work, the phone typicaly rebooted after the DFT splash screen before entering windows, which was indicating obviously a memory issue (independent from the SD card).
For anyonewith issues, MAGLDR 1.13 fixed all of the issues I had. It also got rid of random reboots and non boots of wp7.

[Q] !!HELP!! STUCK ON ANDROID LOGO AFTER gogogo! on magldr

hey guys ive seen a few thread similar to mine but they seem to just different enough, that i cant use the same solution posted.
I used Magldr to run android rom on my hd2 and after the go go go! screen in went to the android logo... then turns off ... then loads again then turns off ... so annoying
I did the whole process over again from scratch but the same thing happened.
Im sure i am missing something but i cant seem to figure out what it is.
I did the following steps
1) falsh HSPL 2.08
2) flash Task 29 with 2.15 radio
3) Paste "initrd.gz" and "zImage" to root sd
4) after reboot i went to "BOOT AD SD"
5) booted rom from CWM
6) everything went good ... got past go go go! then is just stopped at the android logo
laulakh said:
hey guys ive seen a few thread similar to mine but they seem to just different enough, that i cant use the same solution posted.
I used Magldr to run android rom on my hd2 and after the go go go! screen in went to the android logo... but then it just stopped and didn't do anything
I did the whole process over again from scratch but the same thing happened.
Im sure i am missing something but i cant seem to figure out what it is.
I did the following steps
1) falsh HSPL 2.08
2) flash Task 29 with 2.15 radio
3) Paste "initrd.gz" and "zImage" to root sd
4) run Daf.exe
5) after reboot i went to "BOOT AD SD"
6) everything went good ... got past go go go! then is just stopped at the android logo
Click to expand...
Click to collapse
Is your AD SD Boot Dir set to the root ( >.< in the menu) of your SD Card? If not, try reflashing MAGLDR...
Maybe you want to tell us what build you used?
Sent from my HD2 Glacier using XDA App
New problem
thank for the quick post
sorry i should mentioned it I'm using the JDMS Ultimate on HTC HD2 rom
http://forum.xda-developers.com/showthread.php?t=782301
however i figured my earlier problem now im running into something else
i didn't use the "initrd.gz" and "zImage" from CWM
NEW problem
After rebooting with CWM android boots up then turns off and then it boots up from nand and turns off again ... this will keep on looping until i take battery out
I re flashed Magldr but it did the same thing ... im going to reflash HSPL then try again ... but i followed all the direction from the following thread and dont see where i went wrong
http://forum.xda-developers.com/showthread.php?t=898913
GOT IT!!
thanks ... kinda to hose who helped...
I used CWM 1.0 instead and everything worked fine...i also used the the Jaws-MIUI rom
thanks RaiderX303
Ill probably kill this thread soon if oneone posts one but but the questions I had were answered by looking around I was just too lazy at first
hi need help
can not install the Clockwork Mod Recovery On The HD2 when i restart on the MAGLDR only on 2.Boot AD NAND what do need help!!!!!!!!!!!
cant reboot form BOOT AD SD only on Boot AD NAND need help?????
on the AD SD Boot Dir set to the root ( >.< in the menu) which one i select it have <,> AAlic*1,dcim,mydoc*1,WMDRM,TRANSF*1,XDA_UC,GAMELOFT,MULTIM*1.APP,PROGRA*1??????
hope this not way off i am still totaly new at this but , just went trhough something similar with a bad nand install and kept rebooting to quietly brillant, not sure where i found my answer now but hold down the power button after you boot to get to default main magdlr screen where you will be able to make the changes you need then maybe reflash your rom
If it keeps looping over HTC white screen and the 1234 GOGOGO MAGLDR screen then take out your battery and push the battery pins back. They could be loose.
This also happened to me, my i only option and solution was: press hard-reset button on backside so it wont be stuck on the andriod logo and go back to the store and be really nice to the salesman so he would send it back to htc.
I'm currently having issues resulting in this same issue. I've tried mutiple different Roms aswell as using some SD roms in the hopes that I would fine a build suitable for my phone but I always end up getting bad results.
My previous NAND Rom worked fine for all of about 5 hours before I started getting freezes, restarting and constant boot loops along with massive battery drains.
Currently running the below ROM and so far, it's been the most reliable (going almost 12hrs without a hitch) but this morning I found it sat on the little blue android man screen. Had to do a battery pull and switched the phone back on, only to end up on the same screen again. I've left the phone for a fair period of time between each battery pull (probably around 30mins) but still get the same thing.
http://forum.xda-developers.com/showthread.php?t=967353
Any idea's on how to fix this? Ideally I'd like to keep the same build I have now as its a really nice build... I just can't seem to get anything running properly.
Seem to have got it working again. Did a battery pull but left the battery out for a good 20mins before putting it in. Booted up first time and it seems to be working fine now.

Does anyone else HTC hd 2 with WP7 Dual boot Overheats?

I have a HTC HD2 running a WP7 and (Desire Z sd on my storage card). I am also using Maglrd v1.13 ,HSPL 2.08 and Radio 2.15.50 . Every time I boot into WP7 the bottom 1/3 of the HTC hd2 gets very hot and reboots the device or Freezes the Device, it also gives me an error message below 1EFATAL HIT 1. When I use Magldr v1.13 to boot into Android after the device has cooled down, the device also becomes hot and Android SD Desire Z freezes . This is been happening for a week I also tried other SD ROMs that works and I get the same results. Does anybody have that problem also, and can anyone advise a solution.
Does anyone else HTC HD2 with WP7 Dual boot Overheats?
I have a HTC HD2 running a WP7 and (Desire Z sd on my storage card). I am also using Maglrd v1.13 ,HSPL 2.08 and Radio 2.15.50 . Every time I boot into WP7 the bottom 1/3 of the HTC hd2 gets very hot and reboots the device or Freezes the Device, it also gives me an error message below 1EFATAL HIT 1. When I use Magldr v1.13 to boot into Android after the device has cooled down, the device also becomes hot and Android SD Desire Z freezes . This is been happening for a week I also tried other SD ROMs that works and I get the same results. Does anybody have that problem also, and can anyone advise a solution.
I dual boot fine. Its probably your phone hardware. Flash the stock rom and see if the problem persists to find out for sure.
genesis123 said:
I dual boot fine. Its probably your phone hardware. Flash the stock rom and see if the problem persists to find out for sure.
Click to expand...
Click to collapse
I'm dualbooting and mine is fine... no overheating problems. Maybe try a different sd card... or try reflashing everything and starting over... see if it still happens.
I've Reflashed everything twice, put back the original rom and flash back everything . Used a 8gb sd card and another 16gb SD card same results .Device get warm to hot and become unstable as I stated.
Randy Hoover said:
I've Reflashed everything twice, put back the original rom and flash back everything . Used a 8gb sd card and another 16gb SD card same results .Device get warm to hot and become unstable as I stated.
Click to expand...
Click to collapse
Are you using an original HD2 battery? It's possible there's something wrong with the battery. Does it overheat no matter what you do... even if you just leave it in standby? Or is it with intense use? Have you tried just installing an android rom and see if it does it? Does it only happen when you dualboot? Maybe try using magldr 1.12 instead and see if that makes a difference?
I will use it three to seven minutes For example on WP7; Phone Call= reset,all other application = freeze or reset and resets twice while booting into WP7.IN Android All application freezes. I am beginning to think that the HD2 is faulty .
Randy Hoover said:
I will use it three to seven minutes For example on WP7; Phone Call= reset,all other application = freeze or reset and resets twice while booting into WP7.IN Android All application freezes. I am beginning to think that the HD2 is faulty .
Click to expand...
Click to collapse
Probably it is from the sound of it, did your phone overheat before you put
android on your sd card? if so then get that warranty to work cause it seems like
now is the good time.
I'm also having the 1Efatal hit 1 error
Hd2 t9193 none branded I don't know what to do I've tried the stock Rom and it won't go in I might be using wrong one help plz
This sounds familiar...
Advice: be VERY careful here. I believe I busted my LEO's digitizer by ignoring this overheating issue. The screen's responsiveness will start getting erratic, and evetually it will give up.
Good luck

[Q] Problems to flash clK or magldr to HD2

Hello everybody,
I started a thread in the German handy-faq.de forum about flashing my htc hd2 (512LEO) with android.
While they can’t help me, a forum Member told me to ask the xda-Dev.
So here am i and i hope you can help me.
At first, please pardon my mistakes in the English language, it’s a long time ago since I learned it at school
Now my Problem:
My HTC HD2 was repaired by manufacture one year ago. The Smartphone got a new Motherboard with the actual Software (HTC ROM 3.14.407.2(04666) GER, Radio 2.15.50.14…)
The original ROM WM6.5 was/is running without faults.
After reading in many forums about changing the Software I tried to put Android on my HD2.
At first I “opened” the HD2 with HSPL4 and changed the SPL3.03 to HSPL2.08.
After this was successfully done also Task 29 “worked”… I tried to flash clK1.5…the PC said: “done” but after reboot the HD2 stopped with a white screen and green htc letters.
There was no hboot! From booting with pressed “Back” or “Home” Button the same: no menu.
I tried it again several times also with clK 1.4 and magldr (after Task29) the same problem.
Back to WM6.5 via SD Card was no Problem so the HD2 works fine at this time.
What can I do to get Android on my Handy?
Is it possible, that some HD2 didn’t work with clK or magldr?
Is something wrong in "my way" of flashing?
Many thanks
123kb
some older versions of task29 use a radio as the .nbh, so its possible you removed the required radio.
i would.....
forget about task29, its not necessary.
enter bootloader
confirm spl says 2.08.hspl and NOT 2.08.0000
flash 2.15.50 radio
back into bootloader
flash magldr (because it should come up automatically when the phone restarts, without requiring you to press anything, making it easier to tell its worked)
report back.
Thanks for your answer.
I did this yesterday, after installing magldr and auto boot the HD2 shows no Menu, only white screen and htc.
The HD2 shows 2.08 HSPL after booting with L- Button pressed so it shut be "open".
That´s the problem, i can´t get into the Loader Menu.
All the same clK or magldr.
123kb said:
after installing magldr and auto boot the HD2 shows no Menu, only white screen and htc
Click to expand...
Click to collapse
only three reasons that magldr wouldnt show up...
1 - wrong radio - must be 2.xx.50 where xx is 07 or higher (2.15.50 keeps it simple)
2 - wrong hspl - must be 2.08.hspl
3 - faulty hardware.
...are you sure that there are only these 3 reasons?
Radio is 2.15.50.14,HSPL is right 2.08.HSPL and i can´t believe that the Hardware is faulty because Windows Mobile "Backflash" and the Phone is running without any fault.
I will download the Soft again (maybe i loaded "broken" Soft) and try to flash again (without task29 as you wrote)
I´ll be back in some minutes...
...soft download from xda...HSPL 2.08 installed,Radio from orig.ROM 2.15.50.14, with HD2 Toolkit 4.2.0.1 magldr installed...the same as I wrote...no Menu
any idea
Try a different version of MAGLDR/cLK. Your motherboard was replaced, and I have seen so many people with replaced motherboards having problems. It could be like what sam said, a hardware fault. (Technically for HTC, it isn't a hardware fault as long as it doesn't affect the phone's functionality under Windows Mobile)
there have been cases where winmo flashes and works fine, yet other things don't, perhaps magldr starts, but then always hangs at gogogo, or gives 1e fatal hit, , and the dreaded stuck radio has many variants, ranging from being fixable by flashing using the freezer trick, all the way through to nothing at all working ever, , so i could well believe there is a case where winmo would work but nothing else would.
why not try clk again? i believe there is a version of clk that can be flashed from sd card, , might take better than the usb version?
...I tried different Versions of magldr, clK 1.4 and clK1.5 allways the same Problem.
I can´t find clK Version to flash from SD. If you got it, send me a link and I try it.
it seems, that my HD2 only run WM6.5 and before "Murphy" comes and I flash my Phone in a "Paperweight" I stay on using WM6.5.
Thanks for the help.
Have a good time
123kb said:
I can´t find clK Version to flash from SD. If you got it, send me a link and I try it.
Click to expand...
Click to collapse
http://www.mediafire.com/?624yf6cs03buk6f
Copy the .nbh file to a clean SD Card (make sure the SD Card is not too big - a less than 2GB card is sure shot), power up the phone with the vol down key pressed. All the best!
hello ph03n!x,
thanks for the link, I downloaded the file and put the leoimg.nbh to the same 2GB SD Card I used to flash back to WM6.5.
The Phone "said" succesfull done but after reboot, white screen and htc letters.
It will not run on my Phone...ok, back to WM65 again.
Thanks a lot,it was worth a try....I will try it again if there is any way...maybe in the future it is possible )
Hi,
if WinMob6.5 is runing, you can boot Android over WinMob... you only need a right partition on SD-card (see NativSD-thread see: http://forum.xda-developers.com/showthread.php?p=31110691 ) , then install Android in the partition (rom-name must have NativeSD in thread-title like the pacman-rom http://forum.xda-developers.com/showthread.php?p=32721010 ), boot WinMob and start Android via clrcad + haret (or with my "one-click-tool" see: http://forum.xda-developers.com/showthread.php?p=33174747 ) ...
See the Wiki under WinMobile Installation
http://forum.xda-developers.com/wiki/HTC_HD2/NativeSD
(great thanks to Szczepanik for the Wiki)... it looks complicated, but it's realy simple...
My pacman-rom runs great... (thanks XYLO)
Cheers
Klaus
Sent from my HTC HD2 using xda app-developers app
hello o82239,
I try to use your tip, unfortunately without any success,
after starting haret.exe and booting the HD2 shows 6 or 7 lines in very small letters and hang on this screen.
123kb said:
hello o82239,
I try to use your tip, unfortunately without any success,
after starting haret.exe and booting the HD2 shows 6 or 7 lines in very small letters and hang on this screen.
Click to expand...
Click to collapse
Hi,
I think, you should try it all again with a clean SD-card (you can clean all SD-card-partitions under Win7 with "diskpart" or under Linux with fdisk or other tools)... and post all your steps... we can take a look, if you have forgot one step or if you do something wrong...
Cheers
Klaus
Sent from my HTC HD2 using xda app-developers app
just follow the clk install you didn't add driver for your dev.So I think you just follow the step .1.task29 2.flash radio 3.flash clk 4.add driver then reboot with holding on your home button into recovery screen.And can you show us what your screen looks when you in HSPL sreen.
Sent from my HTC HD2 using xda app-developers app
hello and thanks for your answers.
at first for o82239, I tried three different sd cards all are running perfect with WM6.5 (sandisk 32gb class 10, sandisk 8gb class 2,Medion 16gb class 4) formatet with "sdformater", and one partition FAT32 and the second EXT4 with mini tool partition wizard.
for wxl104 the problem is that i can´t get after point 3...clK is successfull installed,shows the pc but the HD2 shows after reboot white screen with green htc logo.
so the main question is:
why did the hd2 hang after rebooting on both "softwaresystems" (sd or nand installation)
i´m shure that i did both installs (many times) the way the "howto" is written or the install guide shows.
123kb said:
hello and thanks for your answers.
at first for o82239, I tried three different sd cards all are running perfect with WM6.5 (sandisk 32gb class 10, sandisk 8gb class 2,Medion 16gb class 4) formatet with "sdformater", and one partition FAT32 and the second EXT4 with mini tool partition wizard.
for wxl104 the problem is that i can´t get after point 3...clK is successfull installed,shows the pc but the HD2 shows after reboot white screen with green htc logo.
so the main question is:
why did the hd2 hang after rebooting on both "softwaresystems" (sd or nand installation)
i´m shure that i did both installs (many times) the way the "howto" is written or the install guide shows.
Click to expand...
Click to collapse
I can't be sure if you have done anything wrong.but just follow the right step,you can't go to CLK or MAGLDR menue.It mean you have done something wrong.you can install w6.5,so the phone driver is ok.But if you use the htc official rom.you can try to re-unclock your phone.And use hspl-2.08 .If also can't you drop your flashing tool,and redown it again.And then follow the right step,which you can serch it though this forum.
wxl104 said:
I can't be sure if you have done anything wrong.but just follow the right step,you can't go to CLK or MAGLDR menue.It mean you have done something wrong.you can install w6.5,so the phone driver is ok.But if you use the htc official rom.you can try to re-unclock your phone.And use hspl-2.08 .If also can't you drop your flashing tool,and redown it again.And then follow the right step,which you can serch it though this forum.
Click to expand...
Click to collapse
1 flash hspl , 2 flash magdlr ,3 boot holding down power button , 4, select usb flash ,5 flash clockwork ,6 flash rom ! that's how i always do it no need to task29

Categories

Resources