I have a HTC HD2 running a WP7 and (Desire Z sd on my storage card). I am also using Maglrd v1.13 ,HSPL 2.08 and Radio 2.15.50 . Every time I boot into WP7 the bottom 1/3 of the HTC hd2 gets very hot and reboots the device or Freezes the Device, it also gives me an error message below 1EFATAL HIT 1. When I use Magldr v1.13 to boot into Android after the device has cooled down, the device also becomes hot and Android SD Desire Z freezes . This is been happening for a week I also tried other SD ROMs that works and I get the same results. Does anybody have that problem also, and can anyone advise a solution.
Does anyone else HTC HD2 with WP7 Dual boot Overheats?
I have a HTC HD2 running a WP7 and (Desire Z sd on my storage card). I am also using Maglrd v1.13 ,HSPL 2.08 and Radio 2.15.50 . Every time I boot into WP7 the bottom 1/3 of the HTC hd2 gets very hot and reboots the device or Freezes the Device, it also gives me an error message below 1EFATAL HIT 1. When I use Magldr v1.13 to boot into Android after the device has cooled down, the device also becomes hot and Android SD Desire Z freezes . This is been happening for a week I also tried other SD ROMs that works and I get the same results. Does anybody have that problem also, and can anyone advise a solution.
I dual boot fine. Its probably your phone hardware. Flash the stock rom and see if the problem persists to find out for sure.
genesis123 said:
I dual boot fine. Its probably your phone hardware. Flash the stock rom and see if the problem persists to find out for sure.
Click to expand...
Click to collapse
I'm dualbooting and mine is fine... no overheating problems. Maybe try a different sd card... or try reflashing everything and starting over... see if it still happens.
I've Reflashed everything twice, put back the original rom and flash back everything . Used a 8gb sd card and another 16gb SD card same results .Device get warm to hot and become unstable as I stated.
Randy Hoover said:
I've Reflashed everything twice, put back the original rom and flash back everything . Used a 8gb sd card and another 16gb SD card same results .Device get warm to hot and become unstable as I stated.
Click to expand...
Click to collapse
Are you using an original HD2 battery? It's possible there's something wrong with the battery. Does it overheat no matter what you do... even if you just leave it in standby? Or is it with intense use? Have you tried just installing an android rom and see if it does it? Does it only happen when you dualboot? Maybe try using magldr 1.12 instead and see if that makes a difference?
I will use it three to seven minutes For example on WP7; Phone Call= reset,all other application = freeze or reset and resets twice while booting into WP7.IN Android All application freezes. I am beginning to think that the HD2 is faulty .
Randy Hoover said:
I will use it three to seven minutes For example on WP7; Phone Call= reset,all other application = freeze or reset and resets twice while booting into WP7.IN Android All application freezes. I am beginning to think that the HD2 is faulty .
Click to expand...
Click to collapse
Probably it is from the sound of it, did your phone overheat before you put
android on your sd card? if so then get that warranty to work cause it seems like
now is the good time.
I'm also having the 1Efatal hit 1 error
Hd2 t9193 none branded I don't know what to do I've tried the stock Rom and it won't go in I might be using wrong one help plz
This sounds familiar...
Advice: be VERY careful here. I believe I busted my LEO's digitizer by ignoring this overheating issue. The screen's responsiveness will start getting erratic, and evetually it will give up.
Good luck
Related
hey guys ive seen a few thread similar to mine but they seem to just different enough, that i cant use the same solution posted.
I used Magldr to run android rom on my hd2 and after the go go go! screen in went to the android logo... then turns off ... then loads again then turns off ... so annoying
I did the whole process over again from scratch but the same thing happened.
Im sure i am missing something but i cant seem to figure out what it is.
I did the following steps
1) falsh HSPL 2.08
2) flash Task 29 with 2.15 radio
3) Paste "initrd.gz" and "zImage" to root sd
4) after reboot i went to "BOOT AD SD"
5) booted rom from CWM
6) everything went good ... got past go go go! then is just stopped at the android logo
laulakh said:
hey guys ive seen a few thread similar to mine but they seem to just different enough, that i cant use the same solution posted.
I used Magldr to run android rom on my hd2 and after the go go go! screen in went to the android logo... but then it just stopped and didn't do anything
I did the whole process over again from scratch but the same thing happened.
Im sure i am missing something but i cant seem to figure out what it is.
I did the following steps
1) falsh HSPL 2.08
2) flash Task 29 with 2.15 radio
3) Paste "initrd.gz" and "zImage" to root sd
4) run Daf.exe
5) after reboot i went to "BOOT AD SD"
6) everything went good ... got past go go go! then is just stopped at the android logo
Click to expand...
Click to collapse
Is your AD SD Boot Dir set to the root ( >.< in the menu) of your SD Card? If not, try reflashing MAGLDR...
Maybe you want to tell us what build you used?
Sent from my HD2 Glacier using XDA App
New problem
thank for the quick post
sorry i should mentioned it I'm using the JDMS Ultimate on HTC HD2 rom
http://forum.xda-developers.com/showthread.php?t=782301
however i figured my earlier problem now im running into something else
i didn't use the "initrd.gz" and "zImage" from CWM
NEW problem
After rebooting with CWM android boots up then turns off and then it boots up from nand and turns off again ... this will keep on looping until i take battery out
I re flashed Magldr but it did the same thing ... im going to reflash HSPL then try again ... but i followed all the direction from the following thread and dont see where i went wrong
http://forum.xda-developers.com/showthread.php?t=898913
GOT IT!!
thanks ... kinda to hose who helped...
I used CWM 1.0 instead and everything worked fine...i also used the the Jaws-MIUI rom
thanks RaiderX303
Ill probably kill this thread soon if oneone posts one but but the questions I had were answered by looking around I was just too lazy at first
hi need help
can not install the Clockwork Mod Recovery On The HD2 when i restart on the MAGLDR only on 2.Boot AD NAND what do need help!!!!!!!!!!!
cant reboot form BOOT AD SD only on Boot AD NAND need help?????
on the AD SD Boot Dir set to the root ( >.< in the menu) which one i select it have <,> AAlic*1,dcim,mydoc*1,WMDRM,TRANSF*1,XDA_UC,GAMELOFT,MULTIM*1.APP,PROGRA*1??????
hope this not way off i am still totaly new at this but , just went trhough something similar with a bad nand install and kept rebooting to quietly brillant, not sure where i found my answer now but hold down the power button after you boot to get to default main magdlr screen where you will be able to make the changes you need then maybe reflash your rom
If it keeps looping over HTC white screen and the 1234 GOGOGO MAGLDR screen then take out your battery and push the battery pins back. They could be loose.
This also happened to me, my i only option and solution was: press hard-reset button on backside so it wont be stuck on the andriod logo and go back to the store and be really nice to the salesman so he would send it back to htc.
I'm currently having issues resulting in this same issue. I've tried mutiple different Roms aswell as using some SD roms in the hopes that I would fine a build suitable for my phone but I always end up getting bad results.
My previous NAND Rom worked fine for all of about 5 hours before I started getting freezes, restarting and constant boot loops along with massive battery drains.
Currently running the below ROM and so far, it's been the most reliable (going almost 12hrs without a hitch) but this morning I found it sat on the little blue android man screen. Had to do a battery pull and switched the phone back on, only to end up on the same screen again. I've left the phone for a fair period of time between each battery pull (probably around 30mins) but still get the same thing.
http://forum.xda-developers.com/showthread.php?t=967353
Any idea's on how to fix this? Ideally I'd like to keep the same build I have now as its a really nice build... I just can't seem to get anything running properly.
Seem to have got it working again. Did a battery pull but left the battery out for a good 20mins before putting it in. Booted up first time and it seems to be working fine now.
my htc hd2 is bricked, the screen is stuck at the white tmobile screen.
However, i can get to the red, green, blue, and white screen.
i read a comment on a old thread, there was a way to fix it, but they didn't post the comment. So is there a way to fix my hd2?
more details on how it might be bricked.
i left my phone uncharged causing it freeze, so i reset it.
that when i took out the battery and ever since
when i try trying it on, it stood in the white tmobile screen.
thi713 said:
my htc hd2 is bricked, the screen is stuck at the white tmobile screen.
However, i can get to the red, green, blue, and white screen.
i read a comment on a old thread, there was a way to fix it, but they didn't post the comment. So is there a way to fix my hd2?
more details on how it might be bricked.
i left my phone uncharged causing it freeze, so i reset it.
that when i took out the battery and ever since
when i try trying it on, it stood in the white tmobile screen.
Click to expand...
Click to collapse
First off your HD2 is not bricked. If it wax bricked it would not so much as turn on.To save your HD2 do one of these two things.
Download the official update from T-Mobile.com. Look behind your battery to find your IMEI number to enter. Next make sure your HD2 is good and charged I know this is hard as it will not boot but just let it charge for a good while as you do not want the battery to die during either method of flashing. Now while the phone is off hold the volume down button down and press the power button but keep holding the volume down button down. When the phone is in bootloader(multicolor screen) connect your phone to the computer via USB and wait for Serial in the white bar of the bootloader screen to change to USB and for your computer to show it recognizes your phone then right click on the update package and click run as administrator and run the update utility. This should flash the stock ROM but if you have MAGLDR you will loose it and if you have HSPL you might lose it.
Now the secound option you have is to right click on the update package and click on view or explore wich ever one you see and find the RUU_signed.nbh file and rename it to leoimg.nbh or LEOIMG.nbh as it is not case sensitive. Then take a 500MB to 4GB SD card that is formated with Fat 32 and place it into a USB SD card reader and plug it into a USB port on your computer. If you are not sure about the format. Go to "My Computer" and find the card reader, it will be a removable drive or a mass storage device (make sure to make a back up copy of the intior contents of the SD card first as it will wipe the card clean)and right click on it and click format and then Fat 32. Copy the leoimg.nbh file to the root of the SD card. After coping it to the SD card place the card in your phone and put it into bootloader the same as mentioned above but keep the volume down button held down until you see searching on the phone screen and then let the volume down button go. You will have to press the power button to comfirm it. This should flash your phone to complete stock as it will remove MAGLDR, CWM, and HSPL if you have it on your phone.
There is other options to but I highly suggest going back to stock and then starting back over again as to me it just simplifies things some. Also seeing as you have a T-Mobile HD2 do not flash a radio that looks like any of these 2.04.50.xx, 2.05.50.xx, or any radio like this 2.xx.51.xx as any of these radios will brick a T-Mobile HD2.
after flashing it back to stock rom, can i flash an android rom again?
is there another way where i can skip the stock rom and just flash an android rom?
thi713 said:
after flashing it back to stock rom, can i flash an android rom again?
is there another way where i can skip the stock rom and just flash an android rom?
Click to expand...
Click to collapse
Yes you can reflash a Andriod ROM if you go back to stock but you would have to flash HSPL 2.08 again, flash MAGLDR 1.13 again, and CWM if you want to use it.
If you just want to flash another Andriod ROM just turn your HD2 off and then turn it back on button keep the power button down until the main menu of MAGLDR comes up (that is if you already have MAGLDR on your HD2) and then follow the instructions from the Andriod ROM on how to flash it using MAGLDR or CWM if you have it.
If you do not have HSPL and MAGLDR on your HD2 uou will have to flash both to hour HD2 befor you can flash a Andriod ROM. To flash these do this but your HD2 into bootloader (muticolor screen) and connect it to your computer via USB cable and wait to see USB in the white bar of the bootloader screen and that your computer recognizes your HD2 then flash wichever one you are wanting to flash. You will have to do this for every individual thing you want to flash. You also need to flash HSPL 2.08 first then MAGLDR 1.13 and then CWM if you want it.
thi713 said:
after flashing it back to stock rom, can i flash an android rom again?
is there another way where i can skip the stock rom and just flash an android rom?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=653614
read this post it will help you to install android dont end up bricking your phone
i have a lot of problems using the magldr, for example i am not able to find a rom that works for me. some of the roms i tried to install won't work. can someone refer a rom that has great battery life? Another problem is that it keep freezing withever i try to boost a rom up. Any answers for that? is there another way for me to flash an android rom without using magldr?
thi713 said:
i have a lot of problems using the magldr, for example i am not able to find a rom that works for me. some of the roms i tried to install won't work. can someone refer a rom that has great battery life? Another problem is that it keep freezing withever i try to boost a rom up. Any answers for that? is there another way for me to flash an android rom without using magldr?
Click to expand...
Click to collapse
No you have to have MAGLDR to install Android. Try installing Clock Work Mod (CWM) and use it to install your Andriod ROM. Just do a search for Clock Work Mod for HTC HD2. Then read and follow the instructions in the ROM thread to use CWM to flash it.
i have a few problems when trying to install any rom using magldr.
First, whenever i boot up to the magldr screen, sometime it will freeze and i have to take out my battery.
Second, When installing a rom, it gets stuck at "the booting android from nand 123456 go go go" screen.
What could be wrong with my magldr, i already tried to re-installing it and it still acts up.
thi713 said:
i have a few problems when trying to install any rom using magldr.
First, whenever i boot up to the magldr screen, sometime it will freeze and i have to take out my battery.
Second, When installing a rom, it gets stuck at "the booting android from nand 123456 go go go" screen.
What could be wrong with my magldr, i already tried to re-installing it and it still acts up.
Click to expand...
Click to collapse
Take your SD card out of your HD2 and then boot it up and see if you still have the problem. If it is gone you need to back up your SD card and do a full wipe of it and reformat it using your computer and a SD card reader. Format it Fat 32.
T-Macgnolia said:
Take your SD card out of your HD2 and then boot it up and see if you still have the problem. If it is gone you need to back up your SD card and do a full wipe of it and reformat it using your computer and a SD card reader. Format it Fat 32.
Click to expand...
Click to collapse
i tried that, and it seem to work, but it still often freezes on me during usage. For example, when i am on the android market, it tends to freeze up. is there any way i can fix this? and can you recommend me an android build that doesn't have this problem?
thi713 said:
i tried that, and it seem to work, but it still often freezes on me during usage.
Click to expand...
Click to collapse
Run a task 29 on your HD2 then reclash MAGLDR and see if this helps it should, unless you have some bad boot sectors.
damn, i also tried that too, but it still freezes on me. i think i have a bad boot sector, how do i fix this?
thi713 said:
damn, i also tried that too, but it still freezes on me. i think i have a bad boot sector, how do i fix this?
Click to expand...
Click to collapse
Well you can not fix bad boot sectors persay witbout replacing the NAND memory chip which acrually requires the replacment of the intior mainboard of your HD2. Because you can not just replce the chip cause of the wah the mainboard is made. Wht you can do is use a JTAG device and some special software to go in and mark those sectors as bad so the phone will no longer try to use those sectors.
I've tried search engine,ive tried everything but my phone still wont boot up:
Im currently using HSPL2.08 and my phone was just fine installing Imilka's Desire HD Ram NAND version yesterday...Installed the rom via clockworkmod and it was just fine..but then yesterday my phone freeze so i pull out the battery..then when i started to boot up the phone again...at Magldr v1.13 the phone shows FatalHit error while loading ROM..Im using radio v2.15 btw
Stuff that I've tried to fix:
Tried Task29,Reflashed WinMo 6.5 stock rom v1.66,tried reinstall magldr v1.13 even tried v1.11 and tried using other radio,using 2 different sim cards and SD cards,tried flashing via USB(TriColour Boot) and SD...EVERYTHING!!
T~T I really dont know what to do...Please help...at this phone i just want my HD2 to be able to boot up again no matter what OS..just want my phone back..
more data needed.
it looks like you're saying it loads HSPL 2.08 then loads magldr then when it tries to load the ROM it gives the fatal thing right?
so what happens after you flash a winmo ROM? does it hang? where? what exactly happens when you turn on your phone? have you tried flashing stock WM6.5?
Yup the fatal error appear on magldr v.1.13
Ive tried task29..
Then when i tried install windows stock 6.5 it stuck on the white htc screen without any red letters on the bottom like usual..
It looks is a risk to do flashes, I have HTC HD2 and I'd lile to installa Android on Nand, but I'm scared by the possibles problems
flawlessx92 said:
I've tried search engine,ive tried everything but my phone still wont boot up:
Im currently using HSPL2.08 and my phone was just fine installing Imilka's Desire HD Ram NAND version yesterday...Installed the rom via clockworkmod and it was just fine..but then yesterday my phone freeze so i pull out the battery..then when i started to boot up the phone again...at Magldr v1.13 the phone shows FatalHit error while loading ROM..Im using radio v2.15 btw
Stuff that I've tried to fix:
Tried Task29,Reflashed WinMo 6.5 stock rom v1.66,tried reinstall magldr v1.13 even tried v1.11 and tried using other radio,using 2 different sim cards and SD cards,tried flashing via USB(TriColour Boot) and SD...EVERYTHING!!
T~T I really dont know what to do...Please help...at this phone i just want my HD2 to be able to boot up again no matter what OS..just want my phone back..
Click to expand...
Click to collapse
I had the same problem. I tried every imaginable solution and nothing would work. I flashed WinMo from the bootloader screen, and SD card and it would sometimes load, but would freeze or hang up most of the time during boot. I tried flashing a DFT ROM, and it would boot about 20% of the time, and hang the rest. When it would boot, it would freeze once it got warm.
Luckily my phone was still under warranty.
fra1977 said:
It looks is a risk to do flashes, I have HTC HD2 and I'd lile to installa Android on Nand, but I'm scared by the possibles problems
Click to expand...
Click to collapse
The statistics are in your favor. If you were to compare all of the times that our HD2's have been flashed versus the amount that have been bricked, it would probably be less than 1% that have been bricked. IMO, Android is so much better than WinMo that it's well worth the risk.
....................
I have the same problem. After trying everything, now it sometimes boots into windows but after a while it suddenly stops working and reboots and sucks on white htc screen....
Tomorrow it will go back for warranty...
does anyone knows how this fatal hit error happens? I used the phone without problems for over 2 weeks with android on nand, before the problems started.
Sent from my HTC HD2 using Tapatalk
I think that this is the problem that made us wait too long for MAGLDR.. cotulla thought that he fixed it but looks like he didin't... i think the bootloader has overwroten the SPL..
Can you guys give more details about your HD2s like "When have you bought it" "which screen you have" ?
flawlessx92 said:
I've tried search engine,ive tried everything but my phone still wont boot up:
Im currently using HSPL2.08 and my phone was just fine installing Imilka's Desire HD Ram NAND version yesterday...Installed the rom via clockworkmod and it was just fine..but then yesterday my phone freeze so i pull out the battery..then when i started to boot up the phone again...at Magldr v1.13 the phone shows FatalHit error while loading ROM..Im using radio v2.15 btw
Stuff that I've tried to fix:
Tried Task29,Reflashed WinMo 6.5 stock rom v1.66,tried reinstall magldr v1.13 even tried v1.11 and tried using other radio,using 2 different sim cards and SD cards,tried flashing via USB(TriColour Boot) and SD...EVERYTHING!!
T~T I really dont know what to do...Please help...at this phone i just want my HD2 to be able to boot up again no matter what OS..just want my phone back..
Click to expand...
Click to collapse
It seems to me like many bad blocks on NAND...
How to verify that:
1) flash cLK (chose a partitioning your prefer)
2) via cmd run the following commands
Code:
fastboot erase boot
fastboot erase recovery
fastboot erase system
fastboot erase cache
fastboot erase userdata
If you have bad blocks it will show up in console of cLK
It will look like this
[6521] can't erase block @ 3424
[6521] bad block @ 3424 (or something like that)
You need to have adb drivers installed and fastboot.exe for the commands. If you don't have download them from here
Put the in a folder i.e. c:\android
navigate with cmd there and run the commands.
CWM can recognize bad blocks and skip them, therefore if you have many in each partition you can create larger partitions for /boot and /system and your phone will work properly until you decide to send it for repair.
If i remember well each block is 128KB
MAGLDR v1.13 on my HTC HD2
i have installed MAGLDR v1.13 on my HTC HD2
Phone have rebooted after installation finished, but DFT MAGLDR Bootloader have not loaded after these(
now i see only a white screan with the green text: ''HTC'' on it
please can somebody help me?
Ps : i had the correct radio ROM
HSPL 3.03
Radio 2.15
Same problem here, it seems the problem is with HD2 1024mem.. Tmous?? will CLK installation will solve? anyone with more suggestion? I would really really appreciate..my hd2 is laying on table for 2 weeks now with no solution
Ive noticed the fatal hit error on the hd2s with those tiny dots in the screen.
sent from my Nexus S
teutakarakashi said:
i have installed MAGLDR v1.13 on my HTC HD2
Phone have rebooted after installation finished, but DFT MAGLDR Bootloader have not loaded after these(
now i see only a white screan with the green text: ''HTC'' on it
please can somebody help me?
Ps : i had the correct radio ROM
HSPL 3.03
Radio 2.15
Click to expand...
Click to collapse
Your problem is wrong hspl.Magldr works only with hspl 2.08
sent from my hd2 using ics
WorldWide60 said:
The statistics are in your favor. If you were to compare all of the times that our HD2's have been flashed versus the amount that have been bricked, it would probably be less than 1% that have been bricked. IMO, Android is so much better than WinMo that it's well worth the risk.
Click to expand...
Click to collapse
agree with that
Did a hd2 the other day. Fatal hit error popped up. Done hundreds of hd2s. Bricked 2. On the particular hd2 i booted into magldr and did a reset. Had to reboot bout 20x to finally work. When it finally booted the touch was unresponsive. After another 10 or so reboots it finally stuck. Easy phone to mod but highest brick rating for me. I flash phones for a living so i know what im doing. Ive bricked my own g1 learning back in 09 and bricked 2 hd2s in 2011. There must be certain hd2s that dont accept the flash. Ive noticed the hd2s with the dots in the screen have been the only ones that give a hard time. Are theres the euro version? I only flash android on them not keep up with its development.
sent from my Sensation
Windows Phone 7 + MAGLDR V1.13
I boot up. HTC screen. Then MAGLDR V1.13 screen. Then another HTC screen (Windows Phone 7 HTC screen). It blocks there for quite some time. Then restarts. It's all it ever does. I can access MAGLDR V1.13 menu, no problem there. It was working fine yesterday =\
What can i do? Help :S
Reinstall the ROM and tell me what happens
Sent from my HTC HD2 using XDA Premium App
What Radio have you got on your phone?
I would re-install your ROM as walidhazem suggested, but make sure that you do a task 29 first, then flash either radio 2.12.50 or 2.15.50 as these seem to be the 2 best radios for WP7.
What SD card have you got as your issue could be related to that. Do you have another SD card you could try? You could also try using SDFormatter to re-format your SD card and then try.
Let us know how you get on.
Thank you for both replies!
If the phone is connected to a power source while in the magldr screen, it charges right?
Just making sure phone could be at 50% more power or not. It's been charging all night.
as far as i remember it doesn't charge.. but even if it's less than 50% i usually do the flash.. just b sure it's not very low..
exhit said:
Thank you for both replies!
If the phone is connected to a power source while in the magldr screen, it charges right?
Just making sure phone could be at 50% more power or not. It's been charging all night.
Click to expand...
Click to collapse
If you still have the magldr screen then boot in the rom. The reason it getting stuck is that the phone is too hot. Remove the battery for 1/2 hour then try again.
Do wait as the HTC screen is showing for a while until it loads the rom.
FPM
sudeep, how can i be sure it's not very low since i can't go the Home Screen.
FlowerPotmen, it's been charging all night, but i tried before that. It wasn't hot then. Also, i don't restart when it stops at the HTC screen. It restarts itself =\
Should i flash another rom? I'm afraid it can brick. If i'm to flash, I'll flash the WM6.5 Official.
exhit said:
sudeep, how can i be sure it's not very low since i can't go the Home Screen.
FlowerPotmen, it's been charging all night, but i tried before that. It wasn't hot then. Also, i don't restart when it stops at the HTC screen. It restarts itself =\
Should i flash another rom? I'm afraid it can brick. If i'm to flash, I'll flash the WM6.5 Official.
Click to expand...
Click to collapse
No need to flash wm6 just use task 29, then flash-in maglder 113 again, then flash your favourite rom again. But make sure to re-format you micro sd card first.
FPM
I can't instal Windows Mobile Center since "i don't have" a Windows Mobile device. I need the Active Sync feature needed for the RUU files. Without that i can't sync Task 29 or any new rom. What can i do?
Go to bootloader and install Roms like you used to do when using ActiveSync.
(Bootloader: Power off phone > Hold volume down button and boot > when you see a tri-colour screen connect the USB and wait until "Serial" to "USB" )
^^
That was the answer to your previous post. But to answer your original question :
Restarting in WP7 is a common, incompatible sd card, issue, try to use another sd-card and reinstall WP7 again.
Guys, i managed to Flash the official rom again. I'm gonna stick with Android SD for now.
Thanks for all the help and tips. I really appreciate the help.
exhit said:
Guys, i managed to Flash the official rom again. I'm gonna stick with Android SD for now.
Thanks for all the help and tips. I really appreciate the help.
Click to expand...
Click to collapse
how did you manage to flash it!!!
Since this week I have a really big problem with my HD2.
November last year I started to install Android on my HD2, first on the SD card and then finally on the Nand (everything went well). Last week I installed one of the latest version and working just fine for one week it stagnated. I had to remove the battery, because nothing worked anymore. After that I got only the white starting screen with HTC and then nothing…
First I run Task29 and flashed it, HSPL, Radio, MAGLDR and then ClockworkMod Recovery. The result was that sometimes the white HTC starting screen popped up, tough I kept the power button pushed down, and sometimes I could enter the MAGLDR. If I finally got into the MAGLDR and tried to recover a backup or try to do a fresh/new install. I formatted the SD with the Panasonic SDformatter, but it didn’t had any effect. Finally I flashed the HD2 back to WM6.5 and the HD2 start working again (not very well). After this I tried to install Android on the SD card, but now the HD2 keep stagnates in the white HTC starting screen and nothing else works..
ROM: Boyppc Ginger 2.3.4 HoneyComB V27, with 150Mb system partition and an 1Gb ext2 partition on the SD card.
Is this a software or a hardware problem? Or both?
Can somebody please help me, because I have no clue how to repair this???
Best regards,
Janha,