Related
ok guys, i have unbricked my vibrant before after the OTA update about 5 weeks ago. i am pretty new at this smart phone stuff, but was pleasantly surprised i was able to get odin to fix the brick. about an hour ago i launched the stupid VooDoo in the OCLF app and the phone now will go as far as the animated galaxy "S", then go blank. i attempted the Odin flash about 5 times now with the same result each time, just boots up past the vibrant screen to galaxy S then goes blank. when the phone restarts or reboots after the odin flash a message in red reads DATA WIPE FAILED between a few yellow text lines. when i try to reinstall packages through boot screen i get the same message i got after the OTA brick, E:Can't open /sdcard/update.zip now the phone was rooted with the OCLF before i launched VooDoo. can somebody help me out?!?
Odin back to stock. That should fix it.
http://forum.xda-developers.com/showthread.php?t=734475
jnutz said:
Odin back to stock. That should fix it.
http://forum.xda-developers.com/showthread.php?t=734475
Click to expand...
Click to collapse
I second this comment. Flashing back to stock shall help. I've soft brick my phone and unbricked it recently.
Sent from my SGH-T959 using XDA APP
www.goteamfriday.com
Anybody else have an suggestions?? like i said in OP i have tried to flash back to stock, about 5-6 times now, all with the same result. phone goes blank after galaxy S screen and music. thanks
As mentioned in a million threads, you need to flash Eugene's "froyo that doesn't brick." Then flash whatever firmware you want.
flashed the froyo successfully from eugene. cool set up, major issue though, i have no application storage now. there are a ton of apps in manage apps and i cannot uninstall any of them. can i fix this somehow??
i'm going to try flashing froyo back in it so it works, not select repartition. then restart odin, select repartition and flash the old vj12 rar and see if that works
Never seemed to get the answer to this. What is the purpose of "Eugene's froyo that doesn't brick?"
Why do some people suggest flashing that, before they odin?
Did eugene take everything down from xda, I can't even find that anymore.
i actually found what i though was the froyo that doesn't brick but it was actually his jk2 version. i clicked Eugene's link on one of his posts and it took me to his site and thats were i got it. i did some searching and actually found the "froyo that doesn't brick", it fixed my baby! i couldn't do anything once flashed but i was then able to flash back to jdf then j16 and all is well. i have flashed like 10 roms into her since this weekend with success, i am back to running j16 with some extras as the games i play don't support 2.2
I'm trying to use Odin but my pc (win xp) is not recognizing my phone. Should i try another pc with vista or win7?
Did you install the drivers
Sent from my SGH-T959 using XDA App
spyda23 said:
I'm trying to use Odin but my pc (win xp) is not recognizing my phone. Should i try another pc with vista or win7?
Click to expand...
Click to collapse
+1 for the drivers.
spyda23 said:
I'm trying to use Odin but my pc (win xp) is not recognizing my phone. Should i try another pc with vista or win7?
Click to expand...
Click to collapse
Check your driver and be sure you phone is in download mode.
jackhuny said:
Check your driver and be sure you phone is in download mode.
Click to expand...
Click to collapse
When i'm in download mode, it doesn't recognize it. When i'm in recovery mode, Odin recognizes it. If i turn my phone on and plug it in, my pc recognizes it, drivers are ok.
Any answers, i could really use the help
what version of Odin are you running? not that it should matter. try pulling the batt, hold volume up and down, insert batt while volume buttons are pressed then plug in USB and wait for it to go into download mode then release buttons. see if Odin recognizes it then.
try a different cable too if above doesn't work
Turn your phone off open odin hold down volume up and down,now plug in the usb this will get you into dl mode now you need to flash Froyo ~~~That does not Brick! rom with odin. Right after you flash that get back into download mode open odin first then with the phone ( power the phone off give it a min, hold down the volume up and down keys, now insert the usb cord BAM download mode) flash back to whatever rom you want.
Hey I'm not so tech sabby could you help wit steps to do the same cuz kind of have same prob. With voodoo
Technowiz said:
Hey I'm not so tech sabby could you help wit steps to do the same cuz kind of have same prob. With voodoo
Click to expand...
Click to collapse
Or you could do the same steps I have already given and it will work, you do know how to use odin right?
Sent from my SGH-T959 using XDA App
I was in download mode attempted to get Froyo via Odin. The flash failed and now the phone is stuck on a screen with a phone...orange caution triangle...computer. I have tried to reset it by removing the battery etc. Any ideas? Thanks.
chrylaser said:
I was in download mode attempted to get Froyo via Odin. The flash failed and now the phone is stuck on a screen with a phone...orange caution triangle...computer. I have tried to reset it by removing the battery etc. Any ideas? Thanks.
Click to expand...
Click to collapse
That icon means your phone is in download mode, plug it in to your computer and run odin
I had this happen to me. The way I fixed it was by taking out the battery then plugging it into the USB cable. It then allowed me to boot up in download mode like normal and I was able to Odin back to stock.
Hope this helps!!
Worked! Thanks!
Im sure you all have heard this one before. But I think mine may be alittle different. Im getting the error, System software not authorized etc. I bought it off of someone. I have odin 3.07 and it doesnt show the COM ports. I got USB drivers for samsung cellphones. I also got the stock ROM downloaded. I guess the question is, is there a way to flash this back to stock from the SD Card? I noticed this. I unplug the USB cable. The phone turns off. It does not come on unless the USB cable is hooked up. So I dont know if this means anything different. This phone has never been hooked up to this computer. It shows a Unknown Device in my device manager. Its hardware ID tag is USB\UNKNOWN. It is showing the SECURE FAIL: KERNAL. Can someone point me in the corrrect direction. Any help would be greatly appreciated.
VaRMiT said:
Im sure you all have heard this one before. But I think mine may be alittle different. Im getting the error, System software not authorized etc. I bought it off of someone. I have odin 3.07 and it doesnt show the COM ports. I got USB drivers for samsung cellphones. I also got the stock ROM downloaded. I guess the question is, is there a way to flash this back to stock from the SD Card? I noticed this. I unplug the USB cable. The phone turns off. It does not come on unless the USB cable is hooked up. So I dont know if this means anything different. This phone has never been hooked up to this computer. It shows a Unknown Device in my device manager. Its hardware ID tag is USB\UNKNOWN. It is showing the SECURE FAIL: KERNAL. Can someone point me in the corrrect direction. Any help would be greatly appreciated.
Click to expand...
Click to collapse
I'm guessing you when you bought it the phone booted is this correct?
If yes, what firmware is on it?
What have you done that no longer allows the phone the boot (did you flash something with Odin)?
The more info the better....
rayburne said:
I'm guessing you when you bought it the phone booted is this correct?
If yes, what firmware is on it?
What have you done that no longer allows the phone the boot (did you flash something with Odin)?
The more info the better....
Click to expand...
Click to collapse
Ive done nothing. I can get it to the POWER, VOL DOWN, HOME BUTTON and it shows the droid Downloading .....
I have no clue what firmware is on it.
VaRMiT said:
Ive done nothing. I can get it to the POWER, VOL DOWN, HOME BUTTON and it shows the droid Downloading .....
I have no clue what firmware is on it.
Click to expand...
Click to collapse
So you bought the phone and it has never booted for you?
If you have MF3 bootloader on there and someone tried to install a custom recovery it could be soft bricked.
Not sure what to suggest if you don't know what occurred to cause the phone to only go into download mode?
You could take it to best buy with a samsung experience center and have them reflash it?
The only problem with this is if you don't have MF3 bootloader, best buy will flash it and upgrade it.....
Try to Odin MDL on it first
Sent from my SGH-I337 using Tapatalk
rushi.1986 said:
Try to Odin MDL on it first
Sent from my SGH-I337 using Tapatalk
Click to expand...
Click to collapse
When you mean MDL. thats the stock rom correct? I do have that. When I look at Odin, it doesnt show anything on the COM part at the top left. Like its hooked up to a com port.
What I meant by the Downloading ...... (with the driod logo guy) Im saying I can get it to do that. Im at the point where I cant get the S4 to be reconized by ODIN. I have the stock rom, odin 3.07 files. I have tried to install the samsung usb drivers....
Still no reply on how to fix this? I have no clue on what to do here. I dont know what firmware etc is on it. I bought it this way. I just want to flash it back to factory, its the att version. It only stays on when the usb is hooked up. I can get it to go into download mode. But on the computer, it doesnt show a usb device being found. I can start odin up, but nothing appears on the COM to show what com port is available. Is there anything I can do here off of a SDCard? I also need to mention that I can not hold down vol up and power and home button to get it to go into recovery mode. It flashes it fast and goes to the yellow triangle.
Anyone please.....
You need to get Odin to recognize it. Try different usb cables. Use the usb ports on the back of the computer. Try a different computer. Without knowing the firmware you're on odin may not work, but it should still recognize your device. If you're on mdl firmware Odin will work. If you're on mf3 then you're sol.
Have you tried to get into the recovery and not just the download mode?
Volume up + Home + Power - If you can get into a recovery try to do a factory reset.
If you cant get into the recovery than you'll need Odin. Sometimes (rarely) kies well affect Odin. If you have kies uninstall it and than run odin.
- Open Odin without your phone connected.
- Power on your device, go into download (Odin) mode. Volume down + home + power.
- Now plug device into your computer.
- Odin should read it, unless its MF3 firmwire.
If your phone is MF3, you may need a Samsung bestbuy rep to reflash the mf3 firmwire.
Sent from my SGH-I337 using XDA Premium 4 mobile app
Br4nd3n said:
Have you tried to get into the recovery and not just the download mode?
Volume up + Home + Power - If you can get into a recovery try to do a factory reset.
If you cant get into the recovery than you'll need Odin. Sometimes (rarely) kies well affect Odin. If you have kies uninstall it and than run odin.
- Open Odin without your phone connected.
- Power on your device, go into download (Odin) mode. Volume down + home + power.
- Now plug device into your computer.
- Odin should read it, unless its MF3 firmwire.
If your phone is MF3, you may need a Samsung bestbuy rep to reflash the mf3 firmwire.
Sent from my SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have tried the power, vol up and home. It flashes the recovery, then goes back to the triangle. Odin, doesnt show a COM port that the phone is connected when i have it in download mode.
Also....i do appreciate you all for helping me figure this out.
I have just bricked my newly-bought Note 3 (N900).
I wanted to flash the latest version of Note 3 via Odin 3.08 (from 4.3 to 4.4.2). I made a big mistake as I didn't enable the "USB DEBUGGING" mode before go to download mode.
I clicked start in Odin and it show FAIL!!!
After I restart the phone all I see on the screen is the message "Firmware upgrade encountered an issue Please select recovery mode in Kies & try again."
I tried to recover it through Kies, but the it shows the phone is not connected or not support. Meaning the Kies cannot communicate with the phone at all.
I also tries to flash in Odin many times, but it still fails.
Please!!! Can anyone here give me some solution.
Thanks.
boycam said:
I have just bricked my newly-bought Note 3 (N900).
I wanted to flash the latest version of Note 3 via Odin 3.08 (from 4.3 to 4.4.2). I made a big mistake as I didn't enable the "USB DEBUGGING" mode before go to download mode.
I clicked start in Odin and it show FAIL!!!
After I restart the phone all I see on the screen is the message "Firmware upgrade encountered an issue Please select recovery mode in Kies & try again."
I tried to recover it through Kies, but the it shows the phone is not connected or not support. Meaning the Kies cannot communicate with the phone at all.
I also tries to flash in Odin many times, but it still fails.
Please!!! Can anyone here give me some solution.
Thanks.
Click to expand...
Click to collapse
make sure kies is not running then try odin again
jaythenut said:
make sure kies is not running then try odin again
Click to expand...
Click to collapse
I tried many time already, but still fail. I think because the usb debugging mode was not enable at the first place.
Thank anyway.
boycam said:
I tried many time already, but still fail. I think because the usb debugging mode was not enable at the first place.
Thank anyway.
Click to expand...
Click to collapse
Usb debugging has nothing to do with it failing when you're using odin. Try a different version of odin.
A simple reflash via Odin 1.85 or 3.07/3.04 will fix it.
boycam said:
I have just bricked my newly-bought Note 3 (N900).
I wanted to flash the latest version of Note 3 via Odin 3.08 (from 4.3 to 4.4.2). I made a big mistake as I didn't enable the "USB DEBUGGING" mode before go to download mode.
I clicked start in Odin and it show FAIL!!!
After I restart the phone all I see on the screen is the message "Firmware upgrade encountered an issue Please select recovery mode in Kies & try again."
I tried to recover it through Kies, but the it shows the phone is not connected or not support. Meaning the Kies cannot communicate with the phone at all.
I also tries to flash in Odin many times, but it still fails.
Please!!! Can anyone here give me some solution.
Thanks.
Click to expand...
Click to collapse
USB Debugging has nothing to do with odin flash, make sure while flashing below steps.
1. Update boot loader is selected in odin.(Edit:for single file not required)
2. Disable antivirus.
3. make sure note 3 drivers are installed.
4. kies not running in bag round.
5.Clear Factory Data & Catch before flash.
if all of those step fail..
try to flash ur rom on other computer or laptop
Sent from my SM-N900 using XDA Premium 4 mobile app
radicalisto said:
A simple reflash via Odin 1.85 or 3.07/3.04 will fix it.
Click to expand...
Click to collapse
Thankx man itis worked:good::good:
jdomadia said:
USB Debugging has nothing to do with odin flash, make sure while flashing below steps.
1. Update boot loader is selected in odin.(Edit:for single file not required)
2. Disable antivirus.
3. make sure note 3 drivers are installed.
4. kies not running in bag round.
5.Clear Factory Data & Catch before flash.
Click to expand...
Click to collapse
tried flashin with diff odin versions, was not working, tried ver 1.85, cause it lets you select update boot loader.......and BAM,,it worked on my tmobile tab 4, now i c.an wipe the tears off the key board, thanks, didnt do # 5 tho, was rooting the tab with cf auto.
markap99 said:
tried flashin with diff odin versions, was not working, tried ver 1.85, cause it lets you select update boot loader.......and BAM,,it worked on my tmobile tab 4, now i c.an wipe the tears off the key board, thanks, didnt do # 5 tho, was rooting the tab with cf auto.
Click to expand...
Click to collapse
You've indeed saved my day... I've been searching high and low, installing various versions of Odin3, downloading tonnes of tar, tarmd5, zip, etc.!
Pardon me for my ignorance, but I never intended to root my cell phone in the first place. I was merely following what Kies suggested, "A New Firmware, Wanna Upgrade?" Oh, truly? Gee, thanks! And **** it, it screwed up my GT-N7000, saying "Firmware upgrade encountered an issue..." and my cell phone never saw the daylight again, regardless how I started it, factory-reset mode wasn't possible at all, only download mode could be started up. Tried with various methods of Odin3 on multiple ROMS, to no avail, until I read your short reply. BAM! (As you put it...)
Thanks a bunch, mate!
I have a similar issue with my sm n900. Lost my imei and baseband, i needed to flash a custom rom to get my baseband before working on the imei, after flashing via odin phone boots to samsung logo then goes blank. And recovery says E failed to mount efs . But i need to use adb on my pc. So how can i possibly enabe usb debugging in order for adb to find my device?
Flashing a stock ROM from sammobile.com via Odin does not require USB debugging. Flashing a stock ROM will flash everything, including modem, bootloader, and recovery.
My N900 Bricked
I am unable to Go to download mode not even the charging symbol too
no Luck at all phone is not starting need a Unbrick or help me how to get it sorted
galaxy Note 3 Sm N900
Tried to open the phone to short the wire but the shorting mentioned in all the imagees doesnt match the design of the phone internal
can some one tell me which points to short to start the phoen in Ext sd mode
or any help would help
hi, I tried rooting my phone but it failed halfway through, now it's in firmware recovery mode, when i run kies it just constantly says connecting, have i bricked my phone
PAULRYAN52 said:
hi, I tried rooting my phone but it failed halfway through, now it's in firmware recovery mode, when i run kies it just constantly says connecting, have i bricked my phone
Click to expand...
Click to collapse
Download Odin if you don't already have it and the matching firmware for your model put phone in download mode and flash with firmware should bring you back
Don't panic!
Firstly, make sure you have the correct drivers so that Windows can see your phone (search on here).
Secondly, if Kies won't work, Odin probably will. Odin (again, search on here for it) allows you to flash any Samsung firmware to your phone (Search sammobile.com for firmwares, but MAKE SURE you get firmware for the correct version of Note 4).
Hope this helps.
ive downloaded the correct firmware for my phone now what do i do in odin
I'm at work at the moment, so I can't spend too much time on here, but this should help you out:
http://forum.xda-developers.com/note-4/general/note-4-n910f-original-firmwares-t3189968
my phone keeps disconnecting then connecting while i connected to odin
Try setting everything up in Odin, and then connecting your phone (in Download mode). Wait for the connection to be recognised by Odin, then click the button to start the flashing. Always works for me.
PAULRYAN52 said:
my phone keeps disconnecting then connecting while i connected to odin
Click to expand...
Click to collapse
If you used an extra back cover remove it and connect the cable again.Check if there is any lose connection.
kakkooran said:
If you used an extra back cover remove it and connect the cable again.Check if there is any lose connection.
Click to expand...
Click to collapse
sorted it just didn't like my laptop, I'm going to try and root it again
Glad you got it sorted out, and good luck with rooting your phone.
ive rooted but it starts up ok but it keeps restarting itself, when it starts up it has yellow writing at the top saying "getting Warranty bit : kernel" it vibrates once then vibrates again as it normally does when booting up. it's working ok now