Database Users

Bricked?

I tried to flash the froyo bootloaders (from here: http://forum.xda-developers.com/showthread.php?t=1117990 ) on my phone using odin and odin showed a fail sign. I disconnected the phone restarted odin but my phone rebooted itself and now shows a phone ! computer sign in the corner. It will not connect to odin at all. Am I 100% screwed? Can I still use odin? Can I just call Tmobile and say "my computer turned off while I was updating to froyo"?

philliple97 said:
I tried to flash the froyo bootloaders (from here: http://forum.xda-developers.com/showthread.php?t=1117990 ) on my phone using odin and odin showed a fail sign. I disconnected the phone restarted odin but my phone rebooted itself and now shows a phone ! computer sign in the corner. It will not connect to odin at all. Am I 100% screwed? Can I still use odin? Can I just call Tmobile and say "my computer turned off while I was updating to froyo"?
Click to expand...
Click to collapse
Phone ! PC is just like Download Mode.
Try opening ODIN before connecting the phone, and turning it on, it should detect the phone.

Longcat14 said:
Phone ! PC is just like Download Mode.
Try opening ODIN before connecting the phone, and turning it on, it should detect the phone.
Click to expand...
Click to collapse
It won't recognize it. It doesn't even show up in device manager.
EDIT: after trying to use a jig about 3 times it goes into regular download mode. ~sigh of relief~

then if ur in dl mode then just odin back to stock and ur in the clear

Do not update 3.2 via Kies, still have problem

what the hell is Samsung doing? I did not update last time with broken firmware and I tried this time with kies.
Now the problem came again.. It only appears Downloading... Do not turn off target and in Kies , it says fail to convert into safe mode...
Now Tablet stayed at the screen with "Downloading ... Do not turn off target!!!" No any response!
-------------------------------------
BTW, I never rooted.
Update. Thank you for everyone in this post for response.
After google from internet, I found a solution.
1) first, after you had "Downloading ... Do not turn off target!!!" screen, Please do not panic ( I did when it happened and really said f*^@ word to Samsung..forgive me...).
2) Press power button + volume down, and hold until it turns off.
3) say "god bless me" or "Mom, please save me." and press whatever combination of buttons you can.
4) It suddenly reboot after that and please use OTA to update. not kies.
5) as far as I can tell, works fine now. However, connect to Kies with wifi does not work.

Were you on a custom rom prior or rooted? If so, did you reset your tab to factory before doing the OTA?
Get back in recovery and flash your back up. If it fails you will have to ODIN your rom in

No problems here using kies, I was only rooted though and I still have root

Do I have to be connected to a PC to get this update? Isn't wifi enough?

You can use wi-fi for OTA update. OP's issue is that even though the tablet went into Download mode, Kies still didn't think it is in download mode. The firmware update hasn't even started to push down to tablet yet.

Based on the earlier problems, you're better off using Kies. If it fails, like it did for OP, it's smart enough to know that and when you disconnect and reconnect the Tab it should automatically go in to emergency recovery mode. What happened to OP happens occasionally with Kies updates. A lot has to do with the PC it's running on and what else is running on that PC. Kies is far from perfect and I'm guessing OP's issue isn't with the new ROM it's with Kies.

I didn't get the update OTA, but just updated with Kies. Had to re-flash CWM and root, but everything works just fine.

Changing to another USB port solved the problem for me. The drivers for the download stage to the tablet could not been loaded for the port I was connected first.
BR
Sent from my GT-P7510 using Tapatalk

flyingstore said:
what the hell is Samsung doing? I did not update last time with broken firmware and I tried this time with kies.
Now the problem came again.. It only appears Downloading... Do not turn off target and in Kies , it says fail to convert into same mode...
Now Tablet stayed at the screen with "Downloading ... Do not turn off target!!!" No any response!
Click to expand...
Click to collapse
exactly the same problem. no solution for me yet...

I repeat this: if you think Samsung's firmware and firmware updates are buggy, Kies is even worse.

foxbat121 said:
I repeat this: if you think Samsung's firmware and firmware updates are buggy, Kies is even worse.
Click to expand...
Click to collapse
Quite true. Kies is terrible. My Galaxy 10.1 wifi won't connect to it at all -- it just sits there attempting to connect. No indication of what's wrong, no log files, nothing. I wasted over an hour last night trying to figure out what was wrong -- removed all "ghost" USB devices, installed Intel INF driver updates, de-installed all active USB hubs & devices, etc.
I even updated Kies to 2.1 ... nothing. Very frustrating.

still no luck with upgrading with kies. it connects to tab, downloads the update to the pc,
the tab goes into download mode in order to install the update, and then connection between kies and tab is lost....
i have the latest kies, i have the drivers, i tried another usb port, i have done a factory reset, but still nothing.

HELP: I bricked my Note 3 (N900). Forget to enable USB debugging before flashing!

I have just bricked my newly-bought Note 3 (N900).
I wanted to flash the latest version of Note 3 via Odin 3.08 (from 4.3 to 4.4.2). I made a big mistake as I didn't enable the "USB DEBUGGING" mode before go to download mode.
I clicked start in Odin and it show FAIL!!!
After I restart the phone all I see on the screen is the message "Firmware upgrade encountered an issue Please select recovery mode in Kies & try again."
I tried to recover it through Kies, but the it shows the phone is not connected or not support. Meaning the Kies cannot communicate with the phone at all.
I also tries to flash in Odin many times, but it still fails.
Please!!! Can anyone here give me some solution.
Thanks.

boycam said:
I have just bricked my newly-bought Note 3 (N900).
I wanted to flash the latest version of Note 3 via Odin 3.08 (from 4.3 to 4.4.2). I made a big mistake as I didn't enable the "USB DEBUGGING" mode before go to download mode.
I clicked start in Odin and it show FAIL!!!
After I restart the phone all I see on the screen is the message "Firmware upgrade encountered an issue Please select recovery mode in Kies & try again."
I tried to recover it through Kies, but the it shows the phone is not connected or not support. Meaning the Kies cannot communicate with the phone at all.
I also tries to flash in Odin many times, but it still fails.
Please!!! Can anyone here give me some solution.
Thanks.
Click to expand...
Click to collapse
make sure kies is not running then try odin again

jaythenut said:
make sure kies is not running then try odin again
Click to expand...
Click to collapse
I tried many time already, but still fail. I think because the usb debugging mode was not enable at the first place.
Thank anyway.

boycam said:
I tried many time already, but still fail. I think because the usb debugging mode was not enable at the first place.
Thank anyway.
Click to expand...
Click to collapse
Usb debugging has nothing to do with it failing when you're using odin. Try a different version of odin.

A simple reflash via Odin 1.85 or 3.07/3.04 will fix it.

boycam said:
I have just bricked my newly-bought Note 3 (N900).
I wanted to flash the latest version of Note 3 via Odin 3.08 (from 4.3 to 4.4.2). I made a big mistake as I didn't enable the "USB DEBUGGING" mode before go to download mode.
I clicked start in Odin and it show FAIL!!!
After I restart the phone all I see on the screen is the message "Firmware upgrade encountered an issue Please select recovery mode in Kies & try again."
I tried to recover it through Kies, but the it shows the phone is not connected or not support. Meaning the Kies cannot communicate with the phone at all.
I also tries to flash in Odin many times, but it still fails.
Please!!! Can anyone here give me some solution.
Thanks.
Click to expand...
Click to collapse
USB Debugging has nothing to do with odin flash, make sure while flashing below steps.
1. Update boot loader is selected in odin.(Edit:for single file not required)
2. Disable antivirus.
3. make sure note 3 drivers are installed.
4. kies not running in bag round.
5.Clear Factory Data & Catch before flash.

if all of those step fail..
try to flash ur rom on other computer or laptop
Sent from my SM-N900 using XDA Premium 4 mobile app

radicalisto said:
A simple reflash via Odin 1.85 or 3.07/3.04 will fix it.
Click to expand...
Click to collapse
Thankx man itis worked:good::good:

jdomadia said:
USB Debugging has nothing to do with odin flash, make sure while flashing below steps.
1. Update boot loader is selected in odin.(Edit:for single file not required)
2. Disable antivirus.
3. make sure note 3 drivers are installed.
4. kies not running in bag round.
5.Clear Factory Data & Catch before flash.
Click to expand...
Click to collapse
tried flashin with diff odin versions, was not working, tried ver 1.85, cause it lets you select update boot loader.......and BAM,,it worked on my tmobile tab 4, now i c.an wipe the tears off the key board, thanks, didnt do # 5 tho, was rooting the tab with cf auto.

markap99 said:
tried flashin with diff odin versions, was not working, tried ver 1.85, cause it lets you select update boot loader.......and BAM,,it worked on my tmobile tab 4, now i c.an wipe the tears off the key board, thanks, didnt do # 5 tho, was rooting the tab with cf auto.
Click to expand...
Click to collapse
You've indeed saved my day... I've been searching high and low, installing various versions of Odin3, downloading tonnes of tar, tarmd5, zip, etc.!
Pardon me for my ignorance, but I never intended to root my cell phone in the first place. I was merely following what Kies suggested, "A New Firmware, Wanna Upgrade?" Oh, truly? Gee, thanks! And **** it, it screwed up my GT-N7000, saying "Firmware upgrade encountered an issue..." and my cell phone never saw the daylight again, regardless how I started it, factory-reset mode wasn't possible at all, only download mode could be started up. Tried with various methods of Odin3 on multiple ROMS, to no avail, until I read your short reply. BAM! (As you put it...)
Thanks a bunch, mate!

I have a similar issue with my sm n900. Lost my imei and baseband, i needed to flash a custom rom to get my baseband before working on the imei, after flashing via odin phone boots to samsung logo then goes blank. And recovery says E failed to mount efs . But i need to use adb on my pc. So how can i possibly enabe usb debugging in order for adb to find my device?

Flashing a stock ROM from sammobile.com via Odin does not require USB debugging. Flashing a stock ROM will flash everything, including modem, bootloader, and recovery.

My N900 Bricked
I am unable to Go to download mode not even the charging symbol too
no Luck at all phone is not starting need a Unbrick or help me how to get it sorted
galaxy Note 3 Sm N900
Tried to open the phone to short the wire but the shorting mentioned in all the imagees doesnt match the design of the phone internal
can some one tell me which points to short to start the phoen in Ext sd mode
or any help would help

Bootloop, No recovery and No download Mode.

Hello,
I was trying to flash Twrp recovery in my phone using flashify. It said flash successfully and i rebooted. It starting bootlooping. I manually tried by pressing Volume up + Home+Power keys it was still doing bootloop. I tried to goto download mode by pressing Volume Down+ Home+Power keys it still kept bootlooping even USB jig didn't work. I need your valued suggestion about what to do next.
Thanks in Advance.
I have Samsung Galaxy Grand Primr G530H
here is video link youtu.be/B_EtRTH93YE

Just flash your firmware from Odin using a PC, I had a similar problem in my tablet, it didn't had download mode either and that worked, try it.

When I connect it to Pc it keeps bootlooping and pc gives sound of connecting then disconnecting of hardware.

GorJessSpazzer said:
Just flash your firmware from Odin using a PC, I had a similar problem in my tablet, it didn't had download mode either and that worked, try it.
Click to expand...
Click to collapse
How did you flash a firmware, when your tablet didn't have download mode? What ODIN version did you use? please tell us we need your experience.

talvigi said:
How did you flash a firmware, when your tablet didn't have download mode? What ODIN version did you use? please tell us we need your experience.
Click to expand...
Click to collapse
Turn off your device, keep your finger in the button until the device is off or pull off the battery, connect it to the PC and flash your firmware through Odin, at that moment I used the 3.70 i think but you can use the latest version it's fine, that should install download mode and the whole firmware if that doesn't work I'm afraid I don't know how else I can help, that's what I did and it worked

GorJessSpazzer said:
Turn off your device, keep your finger in the button until the device is off or pull off the battery, connect it to the PC and flash your firmware through Odin, at that moment I used the 3.70 i think but you can use the latest version it's fine, that should install download mode and the whole firmware if that doesn't work I'm afraid I don't know how else I can help, that's what I did and it worked
Click to expand...
Click to collapse
You are right I did it the same way and it worked for me too. I actually was thinking the phone was quite dead bur or wasn't, I just flashed the recovery firmware 4.4.4 Russian and if you ask me food the step by step procedure it was just like this:
1. I started the Odin 3.07 and connected my device to see is it was detected or not, my surprise the Odin catch it, and shown added and the port number was 18.
2. I just pulled out the USB cable from my laptop and loaded the BL file only to just flash the bootloader file and see what would happen, I was trying it bcz I was totally disappointed with the device i.e. Grand Prime 530H Duos. I also noticed that my device was not stable even with that black screen it used to restart after almost five minutes in that case. And I knew that in 5 minute I will just be able to flash BL file. The BL file was loaded on the Odin now and I inserted the USB cable again while keeping the vol down button pressed to my laptop when the Odin again found and connected with my device, I didnot take any more time to flash BL file.
3. As soon as i had not flashed all the SW therefore, my device didn't boot properly, and I thought it didn't work but when my device was connected to the computer I just listened the startup tone of the Android 4.4.4. From that moment I knew my device was not dead now so i had to select all four files from the recovery firmware of 4.4.4 and connect the device to odin even there was no sign of download mode, as soon i clicked the Start button i saw many things in the Odin which were good enough to see. after the firmware flashed the device got started.
Sent from my SAMSUNG-SM-G920A using Tapatalk

talvigi said:
You are right I did it the same way and it worked for me too. I actually was thinking the phone was quite dead bur or wasn't, I just flashed the recovery firmware 4.4.4 Russian and if you ask me food the step by step procedure it was just like this:
1. I started the Odin 3.07 and connected my device to see is it was detected or not, my surprise the Odin catch it, and shown added and the port number was 18.
2. I just pulled out the USB cable from my laptop and loaded the BL file only to just flash the bootloader file and see what would happen, I was trying it bcz I was totally disappointed with the device i.e. Grand Prime 530H Duos. I also noticed that my device was not stable even with that black screen it used to restart after almost five minutes in that case. And I knew that in 5 minute I will just be able to flash BL file. The BL file was loaded on the Odin now and I inserted the USB cable again while keeping the vol down button pressed to my laptop when the Odin again found and connected with my device, I didnot take any more time to flash BL file.
3. As soon as i had not flashed all the SW therefore, my device didn't boot properly, and I thought it didn't work but when my device was connected to the computer I just listened the startup tone of the Android 4.4.4. From that moment I knew my device was not dead now so i had to select all four files from the recovery firmware of 4.4.4 and connect the device to odin even there was no sign of download mode, as soon i clicked the Start button i saw many things in the Odin which were good enough to see. after the firmware flashed the device got started.
Sent from my SAMSUNG-SM-G920A using Tapatalk
Click to expand...
Click to collapse
I'm glad I helped you and thanks for your description, other people with the same problem can see it, my English its not good and I was afraid that I didn't help you correctly.

Same problem, but apparently worst!
AwkWeirdo said:
Hello,
I was trying to flash Twrp recovery in my phone using flashify. It said flash successfully and i rebooted. It starting bootlooping. I manually tried by pressing Volume up + Home+Power keys it was still doing bootloop. I tried to goto download mode by pressing Volume Down+ Home+Power keys it still kept bootlooping even USB jig didn't work. I need your valued suggestion about what to do next.
Thanks in Advance.
I have Samsung Galaxy Grand Primr G530H
here is video link youtu.be/B_EtRTH93YE
Click to expand...
Click to collapse
Hello guys! Could you please help me with the same issue? The difference is that Odin doesn't recognize when I plug in my phone! I don't know what else to do. It's a G530H.
Thank you very much!

GorJessSpazzer said:
I'm glad I helped you and thanks for your description, other people with the same problem can see it, my English its not good and I was afraid that I didn't help you correctly.
Click to expand...
Click to collapse
talvigi said:
You are right I did it the same way and it worked for me too. I actually was thinking the phone was quite dead but it wasn't, I just flashed the recovery firmware 4.4.4 Russian and if you ask me for the step by step procedure it was someting like this:
1. I started the Odin 3.07 and connected my device to see if it was detected or not, to my surprise, Odin catch it, and shown added and the port number was 18.
2. I just pulled out the USB cable from my laptop and loaded the BL file only to just flash the bootloader file and see what would happen, I was trying it bcz I was totally disappointed with the device i.e. Grand Prime 530H Duos. I also noticed that my device was not stable even with that black screen it used to restart after almost five minutes in that case. And I knew that in 5 minute I will just be able to flash BL file. The BL file was loaded on the Odin now and I inserted the USB cable again while keeping the vol down + home key pressed, to my laptop when the Odin again found and connected with my device, I didnot take any more time to flash BL file.
3. As soon as i had not flashed all the SW therefore, my device didn't boot properly, and I thought it didn't work but when my device was connected to the computer I just listened the startup tone of the Android 4.4.4. or the device. From that moment I knew my device was not dead now so i pullup the battery, put it again inside to check its status, did this almost thrice, but still the same black screen, yet i heard the startup sound everytime. Now as far as knew the phone is on but showing nothing, I had to select all four files from the recovery firmware of 4.4.4 and connect the device to odin even there was no sign of download mode, as soon i clicked the Start button i saw many things in the Odin bar which were good enough to see. after the firmware flashed the device got started.
Sent from my SAMSUNG-SM-G920A using Tapatalk
Click to expand...
Click to collapse
Sent from my SAMSUNG-SM-G920A using Tapatalk

lucas13garcia said:
Hello guys! Could you please help me with the same issue? The difference is that Odin doesn't recognize when I plug in my phone! I don't know what else to do. It's a G530H.
Thank you very much!
Click to expand...
Click to collapse
Is your USB cable original is it working on other devices? And are you using a USB 2.0 port, that is very much necessary, for Odin and some other hardware/software environment applications. And you also must have Samsung USB drivers installed in your PC, you can also try all this process on some other PCs
Sent from my SAMSUNG-SM-G920A using Tapatalk

talvigi said:
Is your USB cable original is it working on other devices? And are you using a USB 2.0 port, that is very much necessary, for Odin and some other hardware/software environment applications. And you also must have Samsung USB drivers installed in your PC, you can also try all this process on some other PCs
Sent from my SAMSUNG-SM-G920A using Tapatalk
Click to expand...
Click to collapse
Hello!
Yes, that USB works with other phones. And even not being the original one, it was working to transfer files before this issue...
It is a USB 2.0 port, and even when I go to "Device Manage" on Windows, it doesn't show any port with an unknown device or something like that...
Thanks!

Bricked J3 2016 (SM-J320FN)

Hey there, I think my J3 2016 is bricked.
I accidently disabled the "OEM Unlock" in Developer Settings and now I am stuck at the samsung boot screen with a green text in left upper corner saying "Custom Binary blocked by FRP Lock".
I tried to flash the stock firmware with latest version of Odin, but the device isn't showing up. I have windows 7 and I reinstalled several times the drivers. My computer is recognizing it just as an Unknown Device.
Please help me, this is my only phone and at the moment I can't efford another one.

s4ss0 said:
Hey there, I think my J3 2016 is bricked.
I accidently disabled the "OEM Unlock" in Developer Settings and now I am stuck at the samsung boot screen with a green text in left upper corner saying "Custom Binary blocked by FRP Lock".
I tried to flash the stock firmware with latest version of Odin, but the device isn't showing up. I have windows 7 and I reinstalled several times the drivers. My computer is recognizing it just as an Unknown Device.
Please help me, this is my only phone and at the moment I can't efford another one.
Click to expand...
Click to collapse
It can be recovered (I've done that myself). Install Kies and smart switch for the drivers, reboot PC, Open Odin, put the stock firmware (preferably from sammobile) in the AP section, in options turn off auto-reboot, start phone in download mode (volume down, home button and power button together) and connect it,flash the firmware. When it's done reboot using vol up, down, home and power together until it turns on then switch on normally.
That's what worked for me, step by step.

Wulfie217 said:
It can be recovered (I've done that myself). Install Kies and smart switch for the drivers, reboot PC, Open Odin, put the stock firmware (preferably from sammobile) in the AP section, in options turn off auto-reboot, start phone in download mode (volume down, home button and power button together) and connect it,flash the firmware. When it's done reboot using vol up, down, home and power together until it turns on then switch on normally.
That's what worked for me, step by step.
Click to expand...
Click to collapse
The problem is that the phone isn't even showing in Device Manager. Installing and reinstalling drivers isn't useful.

s4ss0 said:
The problem is that the phone isn't even showing in Device Manager. Installing and reinstalling drivers isn't useful.
Click to expand...
Click to collapse
Hmm, I occasionally have issues if I use the wrong cable, have you tried changing that over?
The drivers should have sorted it out and made the phone visible really. I seem to remember that mine doesn't pop up in device manager if its in download mode (though that may be me remembering it wrong).

Wulfie217 said:
Hmm, I occasionally have issues if I use the wrong cable, have you tried changing that over?
The drivers should have sorted it out and made the phone visible really. I seem to remember that mine doesn't pop up in device manager if its in download mode (though that may be me remembering it wrong).
Click to expand...
Click to collapse
I have 6 cables, I've tried them all, not a single one works.

s4ss0 said:
I have 6 cables, I've tried them all, not a single one works.
Click to expand...
Click to collapse
Update; sometimes, if i connect the cable, the phone gets phisically found, but it isn't found like a device, just like "Unknown device". Can I do something?

s4ss0 said:
Update; sometimes, if i connect the cable, the phone gets phisically found, but it isn't found like a device, just like "Unknown device". Can I do something?
Click to expand...
Click to collapse
If no cables are working at all then I'm out of ideas sorry.
Ignoring Windows is a good bet, in download mode it often doesn't show up, focus more on whether or not you can see it in Odin, trying different versions of Odin can't hurt either I suppose.

Wulfie217 said:
If no cables are working at all then I'm out of ideas sorry.
Ignoring Windows is a good bet, in download mode it often doesn't show up, focus more on whether or not you can see it in Odin, trying different versions of Odin can't hurt either I suppose.
Click to expand...
Click to collapse
hey there, i just used an older version of odin as you told me and now it works. thanks for the help!

s4ss0 said:
hey there, i just used an older version of odin as you told me and now it works. thanks for the help!
Click to expand...
Click to collapse
No problem s4ss0, I'm glad it ended up being something fairly simple so you could get your phone back.

Connection issues
It is possible to get round the connection issue: Turn off the phone. Turn on the phone in download mode (vol-down, home, power). Connect a Samsung USB cable. Launch ODIN on your PC. Wait a few moments and you should see green text on top left of phone 'ODIN MODE'. Your phone is ready to take downloads.