[Q] HD2 touch screen - HD2 General

hi my hd2 touch screen alone get hangs when i press return hardware key for more than(2 seconds or long press) if i turn off and turn my screen i find my touch screen works ...
i was using android when i got the problem...
so i did task29, uninstall HSPL, install stock windows 6.5 rom....i find same problem in widows too....
plz hlep me...what is the problem? my HD2 is out of warrenty now....

i have the exact same problem nothing we can do but send it for repair, maybe we pressed end key too hard, the touchscreen connector is under it i think so it may be loose or cracked now...its so weird, sometimes i can unlock phone and use it and use it until the screen locks again

Its because the digitizer connection is just behind the power/end key. Many people have this issue and usually blame it on Android (Some topics are realy amusing ) when infact its simply because of hardware failure.
you will need to send it in for warranty/repair.

thanks for the reply kag8

TheATHEiST said:
Its because the digitizer connection is just behind the power/end key. Many people have this issue and usually blame it on Android (Some topics are realy amusing ) when infact its simply because of hardware failure.
you will need to send it in for warranty/repair.
Click to expand...
Click to collapse
thanks for the reply The ATHEiST.....could u plz tell me that i wanna change the mother board or (digitizer connection only)

Related

[Q] Ghost key pressed, worse with MDJ recent update.

search for "ghost" "key presses", nothing relevant so here we go, hope to get a response on this one or I am going back to another ROM
I am getting really bad ghost key presses with this ROM, I used them with WINMO roms but a fix was released. This suggests the screen driver for Android is not yet stable and needs more DEV or is it just me that is having this problem. Sometimes it is so bad I feel like dropping back to winmo, yes I know it is that bad.
issue 1:
Sometimes all the keys around that key I am pressing fire and not just once, several times, mostly on edges of screen.
Issue two:
Sometimes when I have finished a word I get lots of ghost presses and random characters as if I am running my fingers all over the keyboard.
Could my screen be faulty?
See my thread ..u will find all the answers ....ur screen is defective dude ... http://forum.xda-developers.com/showthread.php?t=745255
Dont forget to press the thanks button ...
coolbeer1990 said:
See my thread ..u will find all the answers ....ur screen is defective dude ... http://forum.xda-developers.com/showthread.php?t=745255
Dont forget to press the thanks button ...
Click to expand...
Click to collapse
I saw that, however the problem pretty much goes away on winmo ROMS, dont want to go to the bother of removing spl/mag and android to send it for repair if it isnt broken, are you 100% positive my screen is damaged?
Yes dude ...100% sure ...when i had this problem it was negligable on the windows mobile and more on the android builds...its sooo anoying ....just get ur screen replaced ...u will start loving android buils
Thanks, I will look into this, phone is still within warranty.
He's right, see my thread here. I had exactly the same problem as you. Sent my phone back to HTC, replacement screen, no more bounce/ghost keys.
didnt see that, didnt think of searching for "bounce"
I have put in a support email to HTC.
@Major_Sarcasm --- i still remember how much i had to convince u to change ur touchscreen !

[Q] HD2 Lockscreen & Power Screen problem

Hey guys, sorry for putting of "one-of-these" posts, but I've searched as many forms as I could to no avail regarding this particular problem: my lock-screen and my power/reboot screens are completely unresponsive when brought up. Well actually, the lock-screen will unlock with maybe 10-14 tries (by pressing the power button to turn the screen off and pressing it again to turn the screen on) but even thats kind of wonky.
I've flashed every Android Rom I could get my grimey hands on to see if that would fix the problem, and it doesn't, I've even tried dropping back to WinMo 6.5, nope. Now if I flash WP7, than the lock-screen is responsive, but I'm an Androidian and can't use WP7 for more than maybe 20 seconds.
I'm unsure as to whats causing the problem, at first I thought it may just be a hardware malfunction (as I use my HD2 to watch movies and TV shows quite a bit) but after flashing WP7 and finding that to work well I'm at a loss.
I'm running on Magldr 1.12
SPL-2.08 HSPL 8G
If there is anyone who could help, please do, as I love my HD2 flashed with Android....I'd really hate to have to flash WP7 to use my phone.
Thanks in advance!
I read this somewhere so it might work for you. Turn off auto brightness and screen rotation, it supposedly reduces the wakeup lag.
Huzzah! Thanks a bunch, that little trick helped out!
Nvrmnd, it worked maybe for about 4-5 unlocks and now reverted back to the old problem. Power-off/reboot still doesn't work.
I'm having the same problem.
Like you, I've been flashing many other roms (stocks, 6.5, and androids) and still same problem.
Have you fixed yours yet?
same problem
Same here... Any one able to find out the solution?
This exact problem happened to my phone today
If im understanding well, the screen is no more toucheble, i mean the bottons ( in the bottom) are working and the phone react to them but the screen does not react to the touches....
what can i do ?!?!?!??!??????
pls help me....
forza juve said:
If im understanding well, the screen is no more toucheble, i mean the bottons ( in the bottom) are working and the phone react to them but the screen does not react to the touches....
what can i do ?!?!?!??!??????
pls help me....
Click to expand...
Click to collapse
This seems more like a bad digitizer....try to press the power button down (kind a hard) and at the same time try to unlock your phone or touch the screen to see if it reacts to your touches and if it does, you have a bad digitizer because the minute you release the power button you are going to have the same issues again...the digitizer connector goes under the power button and it sometimes breaks causing that issue, you need to replace your digitizer, no way around it, sorry.

[Q] Touch screen - no response

Dear all,
Please help to find a solution to the following problem, after I installed new HSPL and Nand Android my HD2 would not response. It does not freeze. Touch screen isn't working after it boots and then screen locks the first time. I receive incoming calls and so on but screen is not working. It happened once before when I got Artemis rom running but I got it solved after factory rom rollback. But this trick is not helping this time. I've tried to roll back to the factory rom with original SPL, tried to install WM7. It boots and works just fine accept I can't unlock the screen %) So if any one had same kind of problem can I get some advice please. It makes me to believe that this is software problem.
Thank you in advance!
Apparently this is not such an uncommon problem with the HD2. I have just arranged for my HD2 to be replaced under warranty. Mine would respond fine right after a reboot and stays fine as long as the phone is kept on. But if I turn the phone off and turn it on again there is no touch response whatsoever. There are many complaints about this issue from other HD2 users. If the HD2 were a car, an automatic recall would have been issued.
yeah the problem is hardware and not software
everytime you push " end/lock" button you press down where connection from digitizer is to motherboard. After time it breaks it completely and makes the touchscreen unusable -_- so just send it for warranty
Thanks guys! I suppose this is the only way!
Have the same problem. Phone is in the service waiting for spare parts (touch). Screen stopped to respond on touch within one day slowly not at once.
Yeah I really can't imagine a.y other way. Ship it off and good luck.
Sent from my HTC HD2 using XDA App
m4sta2k said:
yeah the problem is hardware and not software
everytime you push " end/lock" button you press down where connection from digitizer is to motherboard. After time it breaks it completely and makes the touchscreen unusable -_- so just send it for warranty
Click to expand...
Click to collapse
So it means fix it and sell as fast as you can. Can't belive what HTC did.
http://www.htcphones.net/htc-hd2-problems-with-touchscreen/

HD2 touchscreen with MIUI rom won't respond !

I tried soft reset, nothing. Pull'd out battery reboot, nothing. Can you guys recommend me with a few steps i should take ?
Thanks a lot i really need my hd2 this week
Task 29, flash winmo stock, check if touchscreen if working. If it is, flash HSPL 2.08, flash radio, MAGLDR, then android, check if it is working, if it isn't then try a different rom. If from winmo it isn't working, then more than likely it is a hardware problem, eg. your end key is interrupting touch inputs, so take it into repair, although currently HTC is facing repair problems so if you're willing to wait say a month or so, then sure, but if it were me, i'd just buy a new phone.
Mann....i now feel that Android NAND is what gives users so many touch screen problems....yikesss !!!!
Im trying taks 29 now.
I installed this WinMo rom after task 29 and a hard reset:
Energy™-.¸¸.·´¯ 6.5|21916 / 6.5.X|29020 * Sense 2021
Still no touch screen. But the hardware keys are working. Will this be the end for me of a fantastic device and ****ing up 190 euro's
worst situation ever! when you slice your finger to unlock it and nothing happends !! it's a very common problem, HARDWARE related, not android nand related, i've been in the same situation after installing an app, somehow the screen became unresponsive.
i read somewhere that if you pressed a little hard above and arround the power button, the touchscreen starts to work again, because the digitalizer´s conectors are arround there, and i tried that and guess what?? it worked! after that installed button saviour app and never pressed the power button again.
but sadly, after a while the screen becomes unresposive again, so it´s just a temporal solution, now my touchscreen has become completly unresponsive and that trick doesn´t work any more
sounds like the digitizer issue thats been banded about on here
by the way, there are thousands of threats in the forum regarding the same problem, try to give them a read
huevo0000 said:
by the way, there are thousands of threats in the forum regarding the same problem, try to give them a read
Click to expand...
Click to collapse
I did read some, didn't gave me a single working solution. Is this a common problem with HD2's ?
My warranty is gone. Should i try to take it to a local repair shop ? Or take out my baseball bat and give it a good swing ?
It wasn't really supposed to happen you see. Android just requires us to use a lot of buttons and well, the hardware design wasn't meant for the buttons to be pressed a lot, so this happens, if you're unlucky.
Didn't use the power button that much really. Im thinking about selling my hd2 and buying a palm pixi to use for a couple of months. How much should i charge ? 60 bucks ?

Help! Cannot unlock screen, touch function not working.

Has anyone of you guys encountered the same issue with your HTC HD2? Care to share the fix you did? Would this mean bye-bye to my HD2 already?
jutsstuj said:
Has anyone of you guys encountered the same issue with your HTC HD2? Care to share the fix you did? Would this mean bye-bye to my HD2 already?
Click to expand...
Click to collapse
If a clean install (task 29) doesn't help, then I guess you have no other option than sending it for reparation.
It seems like there is a limited life span on the touchscreen. Mine died in October, and I had to buy a replacement because nothing I did fixed the problem.
I had the same issue as you, but in my example touchscreen is slowly dying. For example I can't wake up the phone pressing right (red) button. So I learned that using any other button will not cause freeze of screen. I also discovered that if you gently slap your phone on hand, magically screen starts responding. Weird, but it's ‘working’ like this since 5 months so far.
I just encountered this problem with my HD2 as well. It seems that this is a fairly common issue. Apparently the digitizer for the touchscreen is located directly beneath the red power button and has a tendency to lose its connection.
For me, holding the red power button down with some force for about 5 seconds fixed the issue. Is this temporary? Perhaps, but it has worked just fine for a few days now. Try that out.
Can't Unlock the Phone..
I am having the same problem..I can't unlock the phone..No matter what android Rom I installed.I tried to removed the lock screen and the touch stopped working..But when the phone restarts and you put you pin etc,I can use the phone normally..but when it goes black and trying to turn it on again nothing works on the screen..
Though the hard buttom works..Home screen etc..but can't get the touch to work after the screen goes black!
It's not rom related
I have installed WM6.5 (Stock), Android GB, Android ICS, Android JB But the problem appears to be the same in all
when I press Red button touch doesn't work any more
I would go with digitizer theory
BUT my question is this:
is it gonna get worse? cause for now as long as i avoid Red button everything is OK :good:
and I love my HD2 but if getting worse is possible I have to get rid of it :crying:
Well i had the same problem.now my phone has been to the service centre for reparing
Sent from my LG P350 using xda premium
P.S. my HD2 got a dead touchscreen.so using this this till the HTC guys fix it
Anurag pandey said:
Well i had the same problem.now my phone has been to the service centre for reparing
Sent from my LG P350 using xda premium
P.S. my HD2 got a dead touchscreen.so using this this till the HTC guys fix it
Click to expand...
Click to collapse
Funny (or sad) thing is we don't have an official service center here
so only option is to replace it or sell it as the way it is
Try this:
Lock the screen normally, screen turns off. (Power button)
To turn it on again by pressing any other screen buttons other than the power button. (DONT USE THE POWER BUTTON TO DO THIS)
I found that if I do it this way, the screen runs normal.

Categories

Resources