Hello I have a big Problem I think but I hope someone can help me.
I flashed a NAND.now i want to flash an new Android version with CW but when i enter the USB Flasher mode my pc is doing three sounds instead of the normal usb sound.I can see the MAGLDR in device Manager.
so long for the first Problem.
my second problem is when i run DAF.exe from the CW
i get 2 errorsrogram can not start because RAPI.dll is not on the computer.
I hope someone can help me.
ps:sorry for my english ^^
dmx489371 said:
Hello I have a big Problem I think but I hope someone can help me.
I flashed a NAND.now i want to flash an new Android version with CW but when i enter the USB Flasher mode my pc is doing three sounds instead of the normal usb sound.I can see the MAGLDR in device Manager.
so long for the first Problem.
my second problem is when i run DAF.exe from the CW
i get 2 errorsrogram can not start because RAPI.dll is not on the computer.
I hope someone can help me.
ps:sorry for my english ^^
Click to expand...
Click to collapse
Hi,
Make sure you have the latest version of ActiveSync in XP or WMDC in Windows 7 installed.
Or in Vista/Windows 7 to right click and run as Administrator
Resovled
malybru said:
Hi,
Make sure you have the latest version of ActiveSync in XP or WMDC in Windows 7 installed.
Or in Vista/Windows 7 to right click and run as Administrator
Click to expand...
Click to collapse
.
Thanks for the post!
This will do it
Thank you. Problem is solved.
Related
i tryed to change os language from italian to english and i put my hp6915 in bootloader mode by copying and executing EnterBl.exe from my device... hard reset says "clearing ok", but the device rests in bootloader mode... i need italian rom in order to reflash the damned thing... of course, a method to bypass language check from english hpruu would be better, but i'd be happy to restore sw... please i need a solution asap... thank you...
i have similar problem MY iPAQ hw6915 is now in bootloader mode i need some firmware to update i cant find anywere, somebody can help?
Hi,
There is a tool which should help! It worked for me. It's called UNI_ExitBootloader
(ftp://xda:[email protected]/Universal/Tools_and_Programs/uni_exitbootloader.zip)
1. download the tool
2. disconnect USB cable from your device
3. disable USB connection in ActiveSync
4. reconnect USB cable
5. wait some 30 seconds
6. run the tool
7. If successful, device will boot itself.
Pawel
this solution is only for UNIVERSAL, not for SABLE, DONT WORK
@pjurczy
thanx a lot your solutin work whit my hp hw6915
thanx thnax thanx
juliog said:
this solution is only for UNIVERSAL, not for SABLE, DONT WORK
Click to expand...
Click to collapse
today i try and 100% work
I'm glad it worked
Pawel
you are the best!!!
pjurczy said:
Hi,
There is a tool which should help! It worked for me. It's called UNI_ExitBootloader
(ftp://xda:[email protected]/Universal/Tools_and_Programs/uni_exitbootloader.zip)
1. download the tool
2. disconnect USB cable from your device
3. disable USB connection in ActiveSync
4. reconnect USB cable
5. wait some 30 seconds
6. run the tool
7. If successful, device will boot itself.
Pawel
Click to expand...
Click to collapse
Yuo are the best!!!
worked for me Thanks!!
Super duper!
Been having sleepless nights. Thanks a lot for your solution. Worked like a charm!
Dam not work with win7 64bit, you have another solution?
Doesn't work in vista or 7
How to disable ActiveSync?
When I connect my HP to PC it recognizes as "HP USB Sync".
I tried to disable that thing in Device Manager, but still getting error from "uni_exitbootloader" program (cannot open usb port... and so on)
What can I do? Please, urgently need advice!
P.S. I firstly tried to update it's rom to english, with sable ruu, got error something like "fail to initialize"; and then my hw6915 stuck in the bootloader screen. tried hard reset, but after "clear ok" it just got back to that HP screen.......
EDIT --> I have just found out that these all methods doesn't work with Windows Vista or Windows 7, so I'm going to get to my brother's computer with XP soon to try another time
So every time you do the flash rom will have to borrow your brother's computer ??
why do not you use WMDC 6.1 for Windows Vista that also supports and works in Windows 7 ??
try to check at http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=14
Hakim Rahman said:
So every time you do the flash rom will have to borrow your brother's computer ??
why do not you use WMDC 6.1 for Windows Vista that also supports and works in Windows 7 ??
Click to expand...
Click to collapse
This one for WM 6.1, what could i do with it? hw6915 is WM 5.1.
Another cool thing, that i have just flashed it with uk rom successfully, with xp.
btw, the computer with xp is half-mine not only brother's.
Guys
this morning i wanted to try a new rom and did task 29 and reinstall the radio and magldr 1.13 , and when i conected the phone via flasher mode it dosnt connect with the computer the strange thing is it connect via mas storage, i can flash win mobile which i did so my cable works, but I cant flash any android or win phone 7 ,,,i recently formatted my Pc besides that i could do it without any issue earlier what could be the problem
Damn it i cant flash anything via MGLDR it doesn't get connected only WIN Mobile 6.5
Hi, I would think that the problem is that you have formatted your pc, so you don't have ADB installed. Install Android SDK and you will get ADB support.
Thanx , i will try thanx a lot
I didn't managed to get it done i installed the SDK but no luck can some one pls help me to get my phone connected vis usb to MGLDR
nishanthabgw said:
I didn't managed to get it done i installed the SDK but no luck can some one pls help me to get my phone connected vis usb to MGLDR
Click to expand...
Click to collapse
Hi,
You are missing the drivers that come from ActiveSync in XP or WMDC in Windows 7.
Install whichever is appropriate for you and see if that works.
malybru said:
Hi,
You are missing the drivers that come from ActiveSync in XP or WMDC in Windows 7.
Install whichever is appropriate for you and see if that works.
Click to expand...
Click to collapse
thanx will try nw
Hey everyone!
I've searched the board, but I did not find anything releavant to my issue.
I've been trying to put Clockwork into my magdlr by running the DAF.exe, my HD2 is in USB flasher mode, but DAF.exe pops up and says it needs "RAPI.dll" to run. After that, it's unable to establish a connection to my device.
RAPI.dll is a part of active sync, which is not available for Windows 7, so what can I do to establish a connection to my device?
Thanks in advance
Best regards
panxter
the windows mobile device centre that ships with win 7 isn't the latest.
http://support.microsoft.com/kb/931937
install again from there, reboot phone and pc, and try again.
samsamuel said:
the windows mobile device centre that ships with win 7 isn't the latest.
http://support.microsoft.com/kb/931937
install again from there, reboot phone and pc, and try again.
Click to expand...
Click to collapse
After validating, it takes me back to the frontpage.. no download. Oh stupid microsoft-website! grr!
.
RE: found a dl somewhere else, same version, I'll get back to you after a reboot
Hey guys,
I wanted to play around a little bit with Windows Phone 7 on my HTC HD2 but again encountered a problem with it.
The micro-usb-port of the phone isn't working for a long time now, but i never was needed to fix it (even though i tried ).
At the moment i have an old Android ICS Beta-ROM running on my device and also CLK...and there's were the problem is.
I have no clue how I now could get Windows Phone installed on my device without MAGLDR or how I could install MGLDR without my USB-port :S
It's not very important to get it running, but i want to have tried everything before I give up
So if you have any idea please share it with me...thanks in advance
the_f4b1
you cant install WP7 without flashing MAGLDR and WP7 ROM....
dxdy said:
you cant install WP7 without flashing MAGLDR and WP7 ROM....
Click to expand...
Click to collapse
That's the problem. Do you have any idea how and if i could flash MAGLDR without a USB-port?
sorry, but you cant... not possible... only via USB
dxdy said:
sorry, but you cant... not possible... only via USB
Click to expand...
Click to collapse
Thank you for the quick answer
I had the same problem (steadily disconnecting from my PC and saying "Unknown device")... And I was surprised to see that it only was the cable... try it with another cable before you send it in...
Hey I have MAGLDR already installed and I want to try Windows 7 but my usb port is broken...is it possible to go back to android afterwards?
alexdagreat said:
Hey I have MAGLDR already installed and I want to try Windows 7 but my usb port is broken...is it possible to go back to android afterwards?
Click to expand...
Click to collapse
There is CLK which can istalled via Sdcard. This is the way back to android.
walter79 said:
There is CLK which can istalled via Sdcard. This is the way back to android.
Click to expand...
Click to collapse
this. but using Magldr and trying to install WP7 is impossible. it is flashed through the usb.
Hello guys,
I have windows 8 on my PC. Yesterday I wanted flash a new rom on my hd2, but when I connect the phone with USB Flasher, the computer can not identify my device! This also happens when I want to install magldr... Is there any solution to my problem?
Thanks
DWI Bootlader wont start
privato89 said:
Hello guys,
I have windows 8 on my PC. Yesterday I wanted flash a new rom on my hd2, but when I connect the phone with USB Flasher, the computer can not identify my device! This also happens when I want to install magldr... Is there any solution to my problem?
Thanks
Click to expand...
Click to collapse
I have a similar kind of problem, My phone does get detected on windows 8, but the DWI Bootlader WP7 rom package doesn't run.
I think it's a Win 8 bug.
I solved the problem by installing Windows Mobile!
Thanks
privato89 said:
I solved the problem by installing Windows Mobile!
Thanks
Click to expand...
Click to collapse
Did you flash a wp7 rom ? or android ?
cookymonster1 said:
Did you flash a wp7 rom ? or android ?
Click to expand...
Click to collapse
Setting up the phone with Windows 8 works fine, for loading MAGLDR, cLK, Windows phone, android etc...
I've used it to do all of the above.
cookymonster1 said:
Did you flash a wp7 rom ? or android ?
Click to expand...
Click to collapse
Android, but I think it's the same thing...at the end must only identify the device...