Database Users

After MAGLDR 1.13 doesn't boot!

Hi
after i flashed my HD2 with MAGLDR, it doesnt boot anymore!!!
Can some one help me? I cannot connect it to my laptop to flash ist again. Is there a way to get directly in the USB-modus?
Help me please!!!

Jigsaw8989 said:
Hi
after i flashed my HD2 with MAGLDR, it doesnt boot anymore!!!
Can some one help me? I cannot connect it to my laptop to flash ist again. Is there a way to get directly in the USB-modus?
Help me please!!!
Click to expand...
Click to collapse
did you use HSPL before it ??

i flashed it several times before with HSpl but this is the first time it went worg is there something i can do?

Jigsaw8989 said:
i flashed it several times before with HSpl but this is the first time it went worg is there something i can do?
Click to expand...
Click to collapse
do you have HardSPL 2.08 ??? because in magldr thread it is written as required

1. Wrong section -> There's a Magldr topic, search for it.
2. First read, then act?
Have you installed a rom yet? Does the phone boot to Magldr? A little more info is useful..
Booting into bootloader via: turn on the phone, hold volume down key while booting
Booting into Magldr: turn on the phone and keep the power button pressed down untill Magldr comes up.

Not sure...
Its possilbe that i didn´t update it to 2.08. I think i have got 1.42 but im not sure. If I only could connect my phone to my laptop...

Jigsaw8989 said:
Its possilbe that i didn´t update it to 2.08. I think i have got 1.42 but im not sure. If I only could connect my phone to my laptop...
Click to expand...
Click to collapse
Can you get to 3 color screen where it writes hspl version etc. ?? if yes try to install HSPL 2.08 and then the magldr

I have got 1.42. (i think that the problem! Im able to get in the boot loader but not to MAGLDR . I dont hava a NAND version of andird on my phone but i have got a Windows moble rom on it. Is there a possiblity to bot the WM throgh the bootloader that would be all i need!

im able to get in the bootloader (3 colourd screen) but how should I be able to install a new HSPL without a connection to my Mobile device center?

Do it within this way:
1. Make sure you have HSPL 2.08 installed
2. Install TASK29. If you need it search for this.
3. Install "RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe" on your device. Do some settings within Windows and SHUTDOWN!!!
4. Press VOL-Down and press POWER ON until you will see the flash boot screen.
5. Now install MAGLDR 1.13 (v. 250MB Edition)
6. IF THIS FAILS - install Windows AGAIN and after all install MAGLDR 1.13 WITHOUT Task29.
Yesterday I have done a complete reset. Installed my O2 firmware and replaced my original bootblock. After all I have had the same problem that MAGLDR won't install on this device. I have tried it with 1.12 and 1.13. NOTHING, device boot until the WHITE HTC logo and nothing more. But ANDROID was installed bevore.
After that procedure I was able to flash MAGLDR 1.13 again.

thanks for your help imm try to do anything you have told me! I flashed HSPL 2.08 and Magldr also started. Thankl so much for your Help. Now i will try to install DiserZ andrid rom!

How is it possible to boot windows with MAGLDR? and how is it possible to remove MAGLDR?

If you want boot WINDOWS ONLY: you don't need MAGLDR.
If you want to delete MAGLDR: just use Task29 ROM.
If you want restore all to default:
1. Download your ORIGINAL ROM from your Provider or HTC.
2. Use 7zip and unpack the EXE file.
3. Search the file "RUU_signed.nbh" and rename it to "leoimg.nbh".
4. Format your SD Card with FAT32 format
5. Copy the "leoimg.nbh" to the SDCARD.
6. Insert Card into your device.
Now search the RESET button right next to the SDCARD slot on the back of your device:
7. Press the RESET button AND VOL-Down and when you see within the display "LOADING..." RELEASE both immediately and follow the instructions on the screen. It might be that you need 2 or 3 times until you got it
!!!! EVERYTHING !!! on your device will be erased after all. If you get an error that you are not able to flash "...bla, bla, bla..." don't cry - just download your OFFICIAL ROM by device serial number on the HTC website.
Unpack this EXE (again), rename the *.nb0 file and just do it again.

Struggling to downgrade WP7, Please help!!!

I'm trying reinstall WM6.5 on my HTC HD2 from MAGLDR V1.13.
I've downloaded the stock rom from HTC website and im trying run the installer but it fails it cant seem to pick up my phone as a USB connection.
I tried the bootloader way but it always get stuck at the installation part at 0%.
what am i? doing wrong, its driving me mad..
SPL version is SPL-2.08.0000

Make sure you’ve got more than 50% power on the device.
• Unplug USB cable
• Power Off device.
• Press and hold volume down button and press power button to start again.
• You will be presented with a tricolor splash screen.
• Connect USB cable to PC
• On the Tricolor splash screen you see “serial”; change to “usb”, if not unplug and plug the cable back in.
• As Administrator Run the WM6.5 ROM Update and follow instructions, your device should now be flashed with WM6.5.

GreatLorens said:
Make sure you’ve got more than 50% power on the device.
• Unplug USB cable
• Power Off device.
• Press and hold volume down button and press power button to start again.
• You will be presented with a tricolor splash screen.
• Connect USB cable to PC
• On the Tricolor splash screen you see “serial”; change to “usb”, if not unplug and plug the cable back in.
• As Administrator Run the WM6.5 ROM Update and follow instructions, your device should now be flashed with WM6.5.
Click to expand...
Click to collapse
thanks for the reply,
done the above a few times but no joy..
I see USB at the bootloader and when i run the ROM update, it doesnt show me what the current version of the phone is but just says it will update to the version 3.14.110.1! so when i start the install process nothing happens, i get the error [302]..
why is that?
any other way to flash this??

rafter_01 said:
thanks for the reply,
done the above a few times but no joy..
I see USB at the bootloader and when i run the ROM update, it doesnt show me what the current version of the phone is but just says it will update to the version 3.14.110.1! so when i start the install process nothing happens, i get the error [302]..
why is that?
any other way to flash this??
Click to expand...
Click to collapse
i had came across this issue last week.
when in tri-color mode, re-install hspl 2.08 and then magldr 1.12/1.13.
then try installing wm6.5.
This worked in my case.
Check if it does in urs too...
Al the best...

ankushmulay said:
i had came across this issue last week.
when in tri-color mode, re-install hspl 2.08 and then magldr 1.12/1.13.
then try installing wm6.5.
This worked in my case.
Check if it does in urs too...
Al the best...
Click to expand...
Click to collapse
what ive done so far,
re-installed the hspl 2.08 and then installed the radio 2.15.50.14 from the following site: http://www.addictivetips.com/mobile/how-to-install-hardspl-2-08-on-htc-hd2/
but now at the bootloader im getting the following error 'upgrade ROM code error Please try again"
What have i done wrong???
thanks

flash hspl ... radio ... then mag ... then try the downgrade to winmo

rubledub said:
flash hspl ... radio ... then mag ... then try the downgrade to winmo
Click to expand...
Click to collapse
after the radio, I cannot download magdlr, it stops at 29%.. Or sometimes doesn't do anything!!

I'd suggest task 29 to wipe the phone completly. Then make sure you have the correct stock rom for your phone. EG if you bought a EURO o2 HD2 then you need to have the o2 3.14 stock rom. Extract the .nbh file from the .exe.
Use SD Formatter to format your SD card, this will wipe all windows 7 partitions.
Then copy .nbh file and place it on the sd card, then boot into boot loader (tri colour screen) and follow on screen instructions. A grey screen should appear at this point.
This will remove Hard spl and restore WM 6.5 and also restore the first of the two splash screens and the radio back to factory settings and will also restore your warrently as well.

GhostXSeries said:
I'd suggest task 29 to wipe the phone completly. Then make sure you have the correct stock rom for your phone. EG if you bought a EURO o2 HD2 then you need to have the o2 3.14 stock rom. Extract the .nbh file from the .exe.
Use SD Formatter to format your SD card, this will wipe all windows 7 partitions.
Then copy .nbh file and place it on the sd card, then boot into boot loader (tri colour screen) and follow on screen instructions. A grey screen should appear at this point.
This will remove Hard spl and restore WM 6.5 and also restore the first of the two splash screens and the radio back to factory settings and will also restore your warrently as well.
Click to expand...
Click to collapse
Thanks for this info, will try it. Have you got a link to task 29? Is it a software?

No but it is all over XDA. I think you'll find it someware on the WM 6.5 thread. If that doesn't work your nand will be stuffed but it has allways worked for me!

GhostXSeries said:
I'd suggest task 29 to wipe the phone completly. Then make sure you have the correct stock rom for your phone. EG if you bought a EURO o2 HD2 then you need to have the o2 3.14 stock rom. Extract the .nbh file from the .exe.
Use SD Formatter to format your SD card, this will wipe all windows 7 partitions.
Then copy .nbh file and place it on the sd card, then boot into boot loader (tri colour screen) and follow on screen instructions. A grey screen should appear at this point.
This will remove Hard spl and restore WM 6.5 and also restore the first of the two splash screens and the radio back to factory settings and will also restore your warrently as well.
Click to expand...
Click to collapse
Yes, even i suggest you the "flash via micro sd card" method becoz it works in worst cases. and follow all the steps sequencely. good luck

Task29 gives an error 290 and doesn't complete.
Im getting frustrated... What can i do next

task 29 now wipes my phone but everytime i flash a new rom is crashes at 9% or 10% and then i get the error 290.
i downloaded the stock rom for my phone... argggh what can be done?
thanks

Sounds like nand is dead. Looks as if you will have to return it to get it fixed!

i must agree with ghost ... sounds like you flashed the poor baby to death :'( sad sad day! and very rare i might add!

GhostXSeries said:
Sounds like nand is dead. Looks as if you will have to return it to get it fixed!
Click to expand...
Click to collapse
cannot believe i messed it up.......

know where i can send it for repair? will HTC cover it under warranty? will they be suspicious?

anyone? do i need to ring my phone contract people or go directly to HTC?
Thanks

Depends how old it is. It may need to go directly to HTC to get it fixed.

I read somewhere that error [290]: Invalid Command - the ROM Update Utility has encountered communication errors during the update process.
Try changing the usb cable/connect directly to usb port (not usb hub) if you still want to use usb for flashing.
I always use the sdcard method when there's a problem flashing via usb. Rename RUU_signed.nbh (extract from stock rom exe package) to LEOIMG.nbh and copy the file to sdcard (sdcard MUST be formatted as FAT32 - use HP format tool). Put sdcard into the phone and boot into bootloader mode ... see if it works ...

Rom not booting, only magldr, need to get back to stock

Hi .... I had an hd2 for some time which got kept in the locker for too long..The status as of now is like this.
1. MIUI ROM installed on NAND doing bootloops
2. SD Card formatted .. so no recovery
3. Trying to use magldr usb storage disconnects the phone
4. Can get into the red yellow green screen with status showing usb but when i try to run a stock rom it cannot find the device.
Magldr 1.13 is still running and I have hspl 2.08
Is there any way i can get back the stock firmware installed? Any help will be appreciated. thanks!!

irteza_h said:
Hi .... I had an hd2 for some time which got kept in the locker for too long..The status as of now is like this.
1. MIUI ROM installed on NAND doing bootloops
2. SD Card formatted .. so no recovery
3. Trying to use magldr usb storage disconnects the phone
4. Can get into the red yellow green screen with status showing usb but when i try to run a stock rom it cannot find the device.
Magldr 1.13 is still running and I have hspl 2.08
Is there any way i can get back the stock firmware installed? Any help will be appreciated. thanks!!
Click to expand...
Click to collapse
Have you tried flashing a stock ROM from the SD card? The procedure is outlined here, it doesn't seem too hard. Since you can't connect in MAGLDR use an SD card reader to copy the stuff across.

why no recovery; recovery in magldr 1.13 is stored in nand.So you can go magldr--->ad recovery and run recovery.then wipe all userdata and see if your rom starts again working ok

clio94 said:
why no recovery; recovery in magldr 1.13 is stored in nand.So you can go magldr--->ad recovery and run recovery.then wipe all userdata and see if your rom starts again working ok
Click to expand...
Click to collapse
I tried to go to recovery AD ... It says that boot sources could not be found..

irteza_h said:
I tried to go to recovery AD ... It says that boot sources could not be found..
Click to expand...
Click to collapse
Well, you say it doesn't connect to the PC but what about in MAGLDR? As in the USB flasher? If it does, just flash a new version of CWM (probably through the NAND Toolkit).
If that doesn't work, try a stock ROM from the SD Card and start over.

Nigeldg said:
Well, you say it doesn't connect to the PC but what about in MAGLDR? As in the USB flasher? If it does, just flash a new version of CWM (probably through the NAND Toolkit).
If that doesn't work, try a stock ROM from the SD Card and start over.
Click to expand...
Click to collapse
I was trying to use the USB Flasher earlier and the installation would fail halfway through with various errors.. Tried with 4 different roms.. So decided to do a stock rom from sdcard .. tried a WWE and got an error 28002...couldnt get into magldr even now... Anyways got Task29 ..booted in the red yellow green screen and doing a wipe+hspl+magldr+recovery. As of now it stuck on 0% at the wipe process but it does say 10 minutes for flashing and its been only 2. Lets see.....

Ok the situation as of now is this... Tried installing a stock rom which gave me spl 3.03 ... Magldr no longer working. Task 29 fails to install anything. Trying to install a stock ruu.exe from the rgb screen tells me that the update utility cannot be used for my phone.
Any ideas??

irteza_h said:
Ok the situation as of now is this... Tried installing a stock rom which gave me spl 3.03 ... Magldr no longer working. Task 29 fails to install anything. Trying to install a stock ruu.exe from the rgb screen tells me that the update utility cannot be used for my phone.
Any ideas??
Click to expand...
Click to collapse
So now in the bootloader it says that you have SPL3.03 rather than HSPL 2.08 right? In that case, maybe try reflashing HSPL then MAGLDR etc. because these won't flash unless you have HSPL. I assume that your main aim is to go back to Android after you've sorted this out anyway.

The way I see it - get HD2 toolkit http://forum.xda-developers.com/showthread.php?t=1090783
Install HSPL 2.08 like Nigeldg said and flash magldr or clk anew. I personally use clk 1.5 and it's childlishly easy to use and I had absolutely no prolems. I attached a zipped .nbh file you can flash after HSPL from HD2 toolkit. It's a new clk with recovery. It's obviously not mine, but I can't remember the thread I got it from (I keeep it just in case since downloaded). You can repartition from your phone then and install whatever ROM you need from recovery. The only problem can be flashing HSPL - if this doesn't go well you'd have to do it from SD like someone suggested.

Nigeldg said:
So now in the bootloader it says that you have SPL3.03 rather than HSPL 2.08 right? In that case, maybe try reflashing HSPL then MAGLDR etc. because these won't flash unless you have HSPL. I assume that your main aim is to go back to Android after you've sorted this out anyway.
Click to expand...
Click to collapse
I would but on the hd2 toolkit while installing hspl its mentioned tht it will only work uptil spl 2.10
Daycrawler said:
The way I see it - get HD2 toolkit http://forum.xda-developers.com/showthread.php?t=1090783
Install HSPL 2.08 like Nigeldg said and flash magldr or clk anew. I personally use clk 1.5 and it's childlishly easy to use and I had absolutely no prolems. I attached a zipped .nbh file you can flash after HSPL from HD2 toolkit. It's a new clk with recovery. It's obviously not mine, but I can't remember the thread I got it from (I keeep it just in case since downloaded). You can repartition from your phone then and install whatever ROM you need from recovery. The only problem can be flashing HSPL - if this doesn't go well you'd have to do it from SD like someone suggested.
Click to expand...
Click to collapse
I got the nbh file on the recovery ...but while restarting the phone with the volume button pressed it says "0028002 Not Allow " and returns me back to the rgb screen.... i am in the uae...(Middle East) and i am trying to install the WWE Asia ROM from the htc website. I tried downloading the WWE GCC rom from shippedroms.com but that one is corrupted.....

irteza_h said:
I would but on the hd2 toolkit while installing hspl its mentioned tht it will only work uptil spl 2.10
I got the nbh file on the recovery ...but while restarting the phone with the volume button pressed it says "0028002 Not Allow " and returns me back to the rgb screen.... i am in the uae...(Middle East) and i am trying to install the WWE Asia ROM from the htc website. I tried downloading the WWE GCC rom from shippedroms.com but that one is corrupted.....
Click to expand...
Click to collapse
Yeah don't use the HD2 toolkit, go to the HSPL thread and download the HSPL4 package from there. Just select HSPL2.08 and flash it. The toolkit uses the older HSPL3 package if I'm not mistaken.

HD2 bricked!! Need urgent help from anyone!!!

Hello together,
I had since thursday last week a HD2 NAND flashed to Android IceCreamSandwich,
but after a reboot i dont know why i got a white screen on startup und nuttin happens. So i tried several Troubleshoots to flash again but nuttin happens!!!!
I have the normal HD2 not the TMobile one and got HSPL 2.08SPL on
my Troubleshoots:
Task 29 - Fail because corrupt Image!
HSPL2 - Try to flash to SPL or HSPL no delete/change!
HSPL3 - Try to flash to SPL or HSPL no delete/change!
HSPL4 - Try to flash to SPL or HSPL no delete/change!
Stock Rom - cant find any Official Rom for my Serial: HT031NW03079, and downloaded GERMAN one v.1.66, TURKISH one v1.66 & v.3.14, WWE one v1.66 & v.3.14, WWE ASIA onev1.66, but every try with USB Cable fail with 1% or Image Corrupt Errormessage or hang up on 0%. Tries over SD Card fail every time with
Errormessage 18003 radio v2-fail.
Please Help me!!!

back to winmo use sd card method..

If you can enter in bootloader (with color band) VOL.DOWN + POWER
plub usb to pc and flash a stok rom

I tried this with several Official Roms but no one function..
still hang on 0 % or get a Errormessage on 1% that Image is corrupt over USB
and over SD every try hang with "Errormessage 18003 and Radio_V2 - Fail
LEOIMG.nbh - FAIL
Update Terminate
UPDATE FAIL

You didn't brick it man. Just flash CLK or MAGLDR.

I tried DFT_LEO_MAGLDR113_DAF and it gone 100% but after it I got the Error [270] File is Corrupt over USB.
Try to install MAGLDR over HD2 Toolkit, but hang on 0 %
Try to install CLW over HD2 Toolkit, it gone 100% but after it I got the Error [270] File is Corrupt
Try to install MAGLDR over SD with renameing magdlr.nbh to leoimg.nbh
Update Success but still white screen.. try to open phone with holding power key to enter magdlr menu no sucess - still white screen

You didn't brick you phone. The only serious brick is when you turn on the phone and it vibrates about three of four times. If that's not the problem, i'm sure that you just did someting wrong.
What i suggest is to read the steps in the link very well:
http://forum.xda-developers.com/showthread.php?t=893948
Be aware of the following things;
1. Flash hspl 2, when u use vista: richt click on 'Run as administrator'!! and continue to the screen (make sure phone is connected with a good cable)
2. Flash radio, also run as administrator
3. Make sure you use task 29, Hold volume down and press power button. Wait till you see USB. Then you can flash task 29
4. Use MAGLDR, use volume down and press power button. Flash it (don't forget run as administrator or else you get an error!!
5. Flash CWM via usb flasher (Use the right partition size)
6. Clean SD card with panasonic sd-formatter.
7. Put rom on sdcard and install rom via CWM.
Goodluck!
Greetings,
Arjan

First things first- wrong forum. You have higher chances of getting help in the Q&A section.
Coming to your issue, check if you have a proper USB cable. Most of your error seems to be related to corrupt images, USB cable could be the culprit.
Next, use a different port and reinstall WMDC/ ADB drivers (install them first)
Finally, redownload task29, magldr or cLK images just in case. Use a SD Card that is less than 8GB in size, formatting it in windows with default cluster size.
As long as you are able to get your phone to boot to the tricolour screen, you have not bricked it.
Swyped from my HTC HD2 (ICS 4.0.4)

NLsalvador said:
You didn't brick you phone. The only serious brick is when you turn on the phone and it vibrates about three of four times. If that's not the problem, i'm sure that you just did someting wrong.
What i suggest is to read the steps in the link very well:
http://forum.xda-developers.com/showthread.php?t=893948
Be aware of the following things;
1. Flash hspl 2, when u use vista: richt click on 'Run as administrator'!! and continue to the screen (make sure phone is connected with a good cable)
2. Flash radio, also run as administrator
3. Make sure you use task 29, Hold volume down and press power button. Wait till you see USB. Then you can flash task 29
4. Use MAGLDR, use volume down and press power button. Flash it (don't forget run as administrator or else you get an error!!
5. Flash CWM via usb flasher (Use the right partition size)
6. Clean SD card with panasonic sd-formatter.
7. Put rom on sdcard and install rom via CWM.
Goodluck!
Greetings,
Arjan
Click to expand...
Click to collapse
1. I have a Win7 / 64 Bit Notebook and started everything also with "Run as Adminstrator" but if i try to change the HSPL to 2.08.000 the Program says "It´s done" But on the phone still SPL-2.08.HSPL appears CotullaHSPL!
2. Which Radio i need? I tried to install Radio_Leo_2.15.50.14 but still hang on 0%
3. Task29 hang on 0% or get 100% with Errormessage that Image is corrupt.
4. No way to install MAGDLR, eather it hang on 0% or on 1% with Errormessage Image is Corrupt, try to install MAGDLR over SD and Update success, but can not enter MAGDLR menu by holding Power Key. White Screen Appears nothing else.
5. no way without MAGDLR
6. no way without MAGDLR

m4gnum87 said:
1. I have a Win7 / 64 Bit Notebook and started everything also with "Run as Adminstrator" but if i try to change the HSPL to 2.08.000 the Program says "It´s done" But on the phone still SPL-2.08.HSPL appears CotullaHSPL!
2. Which Radio i need? I tried to install Radio_Leo_2.15.50.14 but still hang on 0%
3. Task29 hang on 0% or get 100% with Errormessage that Image is corrupt.
4. No way to install MAGDLR, eather it hang on 0% or on 1% with Errormessage Image is Corrupt, try to install MAGDLR over SD and Update success, but can not enter MAGDLR menu by holding Power Key. White Screen Appears nothing else.
5. no way without MAGDLR
6. no way without MAGDLR
Click to expand...
Click to collapse
trying it on other computer with a good cable.maybe it's your laptop has something wrong.

try the goldcard method (you cannot generate it for free anymore, but you can google for a good one searching the CID for your sd, try several sd until you will find an sd with a know CID and a goldcard image ready to download for your CID) [try with sandisk/kingstone 2gb, goldcard is not supported with SDHC like 16gb one], and flash from sd in bootloader the nbh image extracted from wwe RUU (you will find *.nbh image under temp folders when you run *RUU*.exe)
maybe with goldcard you can force radio flashing
also try mtty and some tasks (like 2a if i remember well) that try to repair your bad blocks
if you can't solve with these 2 method, sell it on ebay and buy a new one for the same price

The official roms can be extracted with winrar, extract it and copy RUU_signed.nbh to the root of your sd card. Insert the sd and boot it holding volume down and when entered bootloader press volume up. Now it should put it back to WinMo. Then Flash HSPL and Magldr.

m4gnum87 said:
Hello together,
I had since thursday last week a HD2 NAND flashed to Android IceCreamSandwich,
but after a reboot i dont know why i got a white screen on startup und nuttin happens. So i tried several Troubleshoots to flash again but nuttin happens!!!!
I have the normal HD2 not the TMobile one and got HSPL 2.08SPL on
my Troubleshoots:
Task 29 - Fail because corrupt Image!
HSPL2 - Try to flash to SPL or HSPL no delete/change!
HSPL3 - Try to flash to SPL or HSPL no delete/change!
HSPL4 - Try to flash to SPL or HSPL no delete/change!
Stock Rom - cant find any Official Rom for my Serial: HT031NW03079, and downloaded GERMAN one v.1.66, TURKISH one v1.66 & v.3.14, WWE one v1.66 & v.3.14, WWE ASIA onev1.66, but every try with USB Cable fail with 1% or Image Corrupt Errormessage or hang up on 0%. Tries over SD Card fail every time with
Errormessage 18003 radio v2-fail.
Please Help me!!!
Click to expand...
Click to collapse
Try this http://forum.xda-developers.com/showthread.php?t=668347

ph03n!x said:
First things first- wrong forum. You have higher chances of getting help in the Q&A section.
Coming to your issue, check if you have a proper USB cable. Most of your error seems to be related to corrupt images, USB cable could be the culprit.
Next, use a different port and reinstall WMDC/ ADB drivers (install them first)
Finally, redownload task29, magldr or cLK images just in case. Use a SD Card that is less than 8GB in size, formatting it in windows with default cluster size.
As long as you are able to get your phone to boot to the tricolour screen, you have not bricked it.
Swyped from my HTC HD2 (ICS 4.0.4)
Click to expand...
Click to collapse
i tried as you told with reinstalling the drivers for WMDC and redownloading all other things but still the same s... I think the problem is the 2.08.SPL i cant change it or delete it.. or maybe a cache of anything is bricked so he hang on 0% or 1 %... i dont know im so frusted

look at my post, try goldcard method, should force flash process

pirlano said:
look at my post, try goldcard method, should force flash process
Click to expand...
Click to collapse
how i can go over the gold card method if my hd2 is not running? i see in the tutorial that i must get to storage mode and get the SD Cards Serial number..???

jak11 said:
Try this http://forum.xda-developers.com/showthread.php?t=668347
Click to expand...
Click to collapse
The Rom is still no more avaiable to download and if start mtty i have no selection for USB :S

still not solved, i can guide you through skype it will be easier

Task29 ve HSPL 3 araçlarını tekrar indir. Belki sorun onlardadır.
Download Task29 and HSPL 3 again, the problem may belong them.

nphaibk said:
still not solved, i can guide you through skype it will be easier
Click to expand...
Click to collapse
for sure i will be avaible in 3 hours if you want?

[Q] White screen without HTC and impossible to launch any soft

Hello everybody,
i am trying to install android and i have a lot a problem.
First of all, the phone belonged to my bro. One year ago, he wanted to install android but he failed and he bought an other phone. Because it's a good phone, i have decided to do it but it's not very easy....
The phone: white screen without HTC logo, hspl 2.08spl installed
My pc: W7 /usb ok
What i tried:
- change the hspl version : i tried to install an other version, just to try the soft and it was written on the screen that it's a success but nothing change on the version. I mean, i tried to install the 3.03 version but the version stay on 2.08spl even if the message is a success.
- lauch Task29: it's not working. I have a msg error
- install a rom: same problem
I dont remember exactly which error message it was. One was due to a communication error and the other because of the corruption of the imag(error 276).
Do you have an idea?

kam10 said:
Hello everybody,
i am trying to install android and i have a lot a problem.
First of all, the phone belonged to my bro. One year ago, he wanted to install android but he failed and he bought an other phone. Because it's a good phone, i have decided to do it but it's not very easy....
The phone: white screen without HTC logo, hspl 2.08spl installed
My pc: W7 /usb ok
What i tried:
- change the hspl version : i tried to install an other version, just to try the soft and it was written on the screen that it's a success but nothing change on the version. I mean, i tried to install the 3.03 version but the version stay on 2.08spl even if the message is a success.
- lauch Task29: it's not working. I have a msg error
- install a rom: same problem
I dont remember exactly which error message it was. One was due to a communication error and the other because of the corruption of the imag(error 276).
Do you have an idea?
Click to expand...
Click to collapse
My advice is for you to start over from scratch turkey...put the device in bootloader mode and run the AIO HD2 Toolkit and perform a Task 29; once done, put the device in bootloader mode again and run MAGLDR. If you're dead in the water at either of these...get drunk and sing to your cat!

berrywr said:
My advice is for you to start over from scratch turkey...put the device in bootloader mode and run the AIO HD2 Toolkit and perform a Task 29; once done, put the device in bootloader mode again and run MAGLDR. If you're dead in the water at either of these...get drunk and sing to your cat!
Click to expand...
Click to collapse
Like U said I run the AIO HD2 TOolkit and perform a task 29 but I have an error 286 The Nand Flasher Utility has encountered communication errors during the update process...)

Install last HtcSync version
After
If in the bootloader you read on the second line you can read SPL-2.08.HSPL
flash a radio Rom (2.12 or 2.15)
Try to install Clk 1.5.x (Leoimg.nbh on sd card root, you have to start your hd2 with power + vol- at the same time and follow the instructions)
After you can enter in Clk (power + arrow touch) , settings, resize system partition, and after go to recovery to partition your sdcard and install the zip of the rom of your choice....

bzhmobile said:
Install last HtcSync version
After
If in the bootloader you read on the second line you can read SPL-2.08.HSPL
flash a radio Rom (2.12 or 2.15)
Try to install Clk 1.5.x (Leoimg.nbh on sd card root, you have to start your hd2 with power + vol- at the same time and follow the instructions)
After you can enter in Clk (power + arrow touch) , settings, resize system partition, and after go to recovery to partition your sdcard and install the zip of the rom of your choice....
Click to expand...
Click to collapse
I installed the last HTCSync, I checked again my bootloader, and it's the 2.08 HSPL.
I try to flash a radio rom but it failed (ERROR 270- update error: the image file is corrupted.). I try again and it failed again but with an other error message(ERROR 286-update error: the ROM Update Utility has encountered communication errors during the update process).
May I have to try to install Clk or it's not neccessary because I don't have a sd card?

the easiest way is with a SdCard, but it's possible with Hd2 Toolkit ...

bzhmobile said:
the easiest way is with a SdCard, but it's possible with Hd2 Toolkit ...
Click to expand...
Click to collapse
It found a sd card. I will try with this method.

:good:

Nothing working... Still the same message error...

Is my phone dead? Someone can help me? Pleeeeeaaaaaase!!!!!!!!!!!!!!!!!

download stock windows mobile rom. if it's an eu hd2, download an international rom. if it's tmous (tmobile usa), download its' rom.
What i mean is to download the corresponding rom to your device. be sure not to flash the wrong one.
before you start, download hspl4 package from here
run it on your computer, and install 2.08 HSPL (i know you have it, reinstall it)
next run the ruu executable you downloaded (the windows mobile rom i told you to download)
if it flashes, you can flash magldr and try. try AFTER you flash windows mobile, and a RADIO (suggesting 2.15)
if that doesn't work, extract the nbh from the executable, install SPL3.03 , rename nbh to LEOIMG.nbh , in capital letters, put it on your sd<= 4gb
turn phone in bootloader, you should be able to flash the rom. after flashing it reflash hspl and magldr

bro..download windows mobile device center software..Install it on your PC..Then install hd2 toolkit. switch off your hd2. Press volume down and power button until it shows 3 coloured screen.then install hspl,repeat the step and then install magldr,then let it boot up. then select the usb flasher on magldr,repartition according the rom that you want to install.

Hello everybody, I tried your 2 last advices but nothing works. Any idea?

Read this:
http://forum.xda-developers.com/showthread.php?t=1251641
Don't have Sd card and sim card inserted while trying to fix it.
Try on other pc with windows, htc sync and windows Mobile device center installed.
Next thing, are you sure that you have HSPL and not SPL installed, its not same thing and task29 will not work.
Sent from my HD2 using xda premium

Thank you. I will try.