Related
Hi folks, i'm looking for 2 days a way to solve my DHD problem:
It can't boot anymore. It pop up the "htc quietly brilliant" screen, play the boot sound and, start this step again, and again, and again...
So I'm googling a LOT about how to solve this, if exist a way to restore the original rom. Because i'm thinking that was the problem, my original rom is gone.
That happens when i try to install 3 softwares from appbrain, my device got freeze and i hit the power button to reset. So, after that, my device is gone.
So i came here, to ask you folks: There is a way to recover the original rom ? Without send to warranty (because it spend something like 1 month here).
I'm not a mobile hacker or something, i'm just trying to be happy with my device.
Thanks a lot and sorry for my poor english!!
Perhaps try booting to the bootloader, by holding Power + Volume down button. From there, you should be able to do a factory reset, which may or may not fix your problem. Worth a shot at least, imo
And if it does not work when you do a factory reset, you can use a rom.zip from HTC RUU to restore your phone.
Now the important thing is to know which HTC rom you are running. If it is unbranded, 1.72.405.3 is a sure shot. Download the RUU.exe from Stock roms thread in android development subforum, and run it. When the window pops up, open run prompt, and type: "%TEMP%". Then search for rom.zip, copy it to your desktop, rename it to PD98IMG.zip and put it to your SD card (I hope that you have a card reader). Then just reboot to bootloader as tmh described, and watch the magic happen
Then if your phone is branded, you can still use the same technique to make PD98IMG.zip, but you have to get the RUU that matches your branding. There are lots of RUUs in android development subforum, just search.
Hi guys,
thanks a lot for quik reply!
I perform the procedure indicated by tmh, but without lucky ;\
I think it is unbranded. I buy it at Portugal and i'm using at Brazil right now.
I'll perform your tip jkoljo.
I'll post a repply to let people know if it works or not.
Thanks a lot!!
Hope the advice the last guy gave helps , a factory re set may work fine and fix the issue. Iv had 3 dhd since the day of release , the second one I had wouldn't switch on, had it replaced by Vodafone . Not sure weather or not they will give you a new one . Hope u get it fixed
Sent from my Desire HD using XDA App
I'm not sure if i got cover from warranty.
Right now, my "PROOF OF PURCHASE" is at europe, and i'm at america, so i must get this work again by myself, or pay (some expensive value, i think) for htc support.
I found those ROM version:
RUU_Ace_HTC_WWE_1.72.405.3_R2_Radio_12.28e.60.140f_26.04.02.17_M2_SF_release_163262_signed.exe 04-Jan-2011 12:41 285M Windows executable file
RUU_Ace_HTC_WWE_1.72.405.3_R_Radio_12.28e.60.140f_26.04.02.17_M2_release_161342_signed.exe
but i'm not sure about "WWE". What it means?
dogasantos said:
I'm not sure if i got cover from warranty.
Right now, my "PROOF OF PURCHASE" is at europe, and i'm at america, so i must get this work again by myself, or pay (some expensive value, i think) for htc support.
I found those ROM version:
RUU_Ace_HTC_WWE_1.72.405.3_R2_Radio_12.28e.60.140f_26.04.02.17_M2_SF_release_163262_signed.exe 04-Jan-2011 12:41 285M Windows executable file
RUU_Ace_HTC_WWE_1.72.405.3_R_Radio_12.28e.60.140f_26.04.02.17_M2_release_161342_signed.exe
but i'm not sure about "WWE". What it means?
Click to expand...
Click to collapse
the different is just the radio version. just try flash one of them and see if that work.
WWE means World Wide English, which is an international release
Any one of those RUUs you linked is ok, as hedayat7 already said.
WWE is World wide English...so both are english Roms...try the RUU flash, it should work like a dream....
jkoljo said:
Download the RUU.exe from Stock roms thread in android development subforum, and run it.
Click to expand...
Click to collapse
Sorry ask for your help again, but at Official thread (thread number 841207) for DHD files, both 1.72.405.3 links are broken.
So i search for another thread, and found another one, but when i run the .exe, it ask for a USB connection to device, so it appears wrong.
Could you gimme a hand to find the correct file?
PS: I can help with a web hosting to all correct files.
You probably found the correct RUU, now proceed to %TEMP% and copy rom.zip to desktop.
You can find RUUs here: http://xdafil.es/index.php?path=DesireHD/RUU/
I am not completely sure if those zip files are actual rom.zips, you can check that. Open up the zip, and if it has a long list of hboot, system, android-info.txt etc, then it is rom.zip and you can just go ahead and rename it to PD98IMG.zip.
jkoljo said:
You probably found the correct RUU, now proceed to %TEMP% and copy rom.zip to desktop.
You can find RUUs here: ...
I am not completely sure if those zip files are actual rom.zips, you can check that. Open up the zip, and if it has a long list of hboot, system, android-info.txt etc, then it is rom.zip and you can just go ahead and rename it to PD98IMG.zip.
Click to expand...
Click to collapse
But i did that.
The "1.72.405.3" files at this URL are broken (Or need password to access it, because "You don't have permission to access" message pop up).
When i run the RRU i got two screens, first i must accept a advice, the second one ask if I have a USB connection to my device. Even when i proceed to next step, i got no .zip file on my %TEMP%.
Im lost because of that lol
UPDATE: OK I FOUND IT! haha ty
Thanks a lot my friends,
but it doesn't work.
I perform the process for 2 different roms, and it doesn't work.
Still can't boot.
I'll sent for warranty and wait a loooong time..
But thanks a lot for help me with this!!
Ok, then there is something wrong in the device itself. You have to send it to a service center.
Sent from my Desire HD using Tapatalk
Hi again,
i keep a little hope that i can restore my phone, so i found a possible solution:
OTA update.
At "showthread.php?t=667728&page=2", i found a guy with the same problem i think, here is the quote:
Kinma said:
I had the same problem last week.
I suspected it had to do with the EXT3 partition.
Solved it by first flashing the OTA 2.2 ROM (for rooted users) as this does not use the EXT3. Then used Rom manager to recreate the EXT3.
Now all ROMs that use the EXT3 run fine!
Click to expand...
Click to collapse
(thanks Kinma for the feedback)
So, i start a search for OTA update file here, and found at "showthread.php?t=885996".
But when i choose "Apply sdcard:update.zip", i got INVALID OPERATION.
Someone have a tip for me about this?
Thanks (its very sad, but i must keep hope).
dogasantos said:
(thanks Kinma for the feedback)
Click to expand...
Click to collapse
You are welcome.
What happened was that after a reboot of the phone the phone started rebooting in the boot sequence, i.e. a boot loop.
I tried a lot of things and nothing worked.
Finally I suspected that the problem might be with the SD card. I had a backup, so I had no problem doing a factory reset.
Then I booted the phone without the SD card.
The phone booted fine.
That way I was certain that the problem was with the SD card.
I had 2 partitions on the SD card, an EXT3 part and the rest was a normal Fat part.
I could still read the card, so I made a backup of all the data on the card.
Then I reformatted the card using windows.
The phone booted fine with an empty, reformatted, SD card.
Since I use Apps 2 SD, I had to recreate the EXT3 partition.
If your rom does not use this, you do not have to do this.
After recreating the EXT partition, put back all files that I want on my SD card.
My advice would be to do a factory reset and after that boot the phone without the SD card.
If the phone boots, you know the problem is with the card.
Hope that helps; good luck!
dogasantos said:
Sorry ask for your help again, but at Official thread (thread number 841207) for DHD files, both 1.72.405.3 links are broken.
So i search for another thread, and found another one, but when i run the .exe, it ask for a USB connection to device, so it appears wrong.
Could you gimme a hand to find the correct file?
PS: I can help with a web hosting to all correct files.
Click to expand...
Click to collapse
Here, use this link:
http://forum.xda-developers.com/archive/index.php/t-899564.html
From "football" post copy and paste his link, the download would start immediately..
Hi folks,
boot without the SD card, doesn't work =(
I'm really without luck with this.
I do:
- Factory reset
- Clear cache and userdata
- Boot without SD or/and SIM cards
- Reflash RUU WWE 1.72.405.3 Radio 26.04.02.17_M2
- Reflash RRU WWE 1.72.405.3 Radio 26.04.02.17_M2 SF
- erase all SD
One show was use OTA update.zip, but at this step i got "invalid operation"
SO, nothing works!
Well, it appears a lost battle =\
thanks folks for all help.
Yeah, there must be something wrong in your device itself, for example a motherboard fault. Send it back to HTC.
yukinok25 said:
Here, use this link:
http://forum.xda-developers.com/archive/index.php/t-899564.html
From "football" post copy and paste his link, the download would start immediately..
Click to expand...
Click to collapse
Hi,
I found the information extremely useful. Big Thanks
GRuti
After I Install Urokdroid is their a possibility to return it back to Archos Firmware or Android firmware?
If you install Uruk the Urukway, the original is still there.
If you install it on internal sd, just go into recovery, format the system and install the AOS you get from Archos.
fzelle said:
If you install Uruk the Urukway, the original is still there.
If you install it on internal sd, just go into recovery, format the system and install the AOS you get from Archos.
Click to expand...
Click to collapse
Thanks... ill be doing the uruk to my archos 101...thx
Wait, can I install Uruk and then go back to the stock Archos? In other words, recover to Archos if I have some minor hardware problem thus allowing me to get warranty work, or is it only possible to recover to the Archos SDE?
ExploreMN said:
Wait, can I install Uruk and then go back to the stock Archos? In other words, recover to Archos if I have some minor hardware problem thus allowing me to get warranty work, or is it only possible to recover to the Archos SDE?
Click to expand...
Click to collapse
I think you can. I just format everything and installed the latest archos firmware. Urukdroid runs fast and can't wait for the .7.
ExploreMN said:
Wait, can I install Uruk and then go back to the stock Archos? In other words, recover to Archos if I have some minor hardware problem thus allowing me to get warranty work, or is it only possible to recover to the Archos SDE?
Click to expand...
Click to collapse
I believe that installing the SDE to be able to install Uruk will void your warranty. I don't think you can fully uninstall the SDE software, but I may be wrong.
that's correct.
You can't go back to just stock. As the SDE will survive even with full format.
you lose warranty when u install SDE. (SDE will stick there forever hence they'll know and u can't undo this)
unless some great dev come up with a good hack.
You can uninstall the SDE (from recovery menu -> ... -> ... remove developer edition) but, as Archos says, your device still is "watermarked".
And most importantly, depending on your country, your warranty doesn't get voided. for example: your usb port doesn't break down because you installed the SDE, so it'll be fixed.
I just installed urukdroid. Although everything appears to be working fine, the screen response is no longer as smooth as it used to be. This could be because of the SD card I am using.
Any idea how I can find out the class of my SD card? I do not see it mentioned on the card itself.
sazfar13 said:
Any idea how I can find out the class of my SD card? I do not see it mentioned on the card itself.
Click to expand...
Click to collapse
SDCard class is not the best way to judge it's speed. You can use iobench.sh from Uruk0.6 to do the test and compare/publish results in SD card performance thread.
OK I will run the script and post the results for my patriot 2Gb SD card.
I still cannot post on the Android development thread so I am posting my results here. Maybe someone can move this post over there.
Manufacturer/brand name: Patriot
Card size: 2GB
Card class: ?
Card URL: http://www.tigerdirect.ca/applications/SearchTools/item-details.asp?EdpNo=3869652
Your throughput score is: 4477
Your metadata score is: 206.1
localhost,128M,2023,70,5612,6,4209,4,2799,93,16792,8,43.1,0,16,51,0,+++++,+++,31,0,48,0,+++++,+++,33,0
SDCard by SA02G (0x0 manufacture date 12/2009, oemid 0x544d
Quick one of the firmware front, I have UrukDroid installed, when I come into it I get a firmware upgrade notification to 2.1.8 (I had it on Android so not sure why its asked) Is it ok to update when in the developer edtion or with this overwrite UrukDroid?
SWFlyerUK said:
Quick one of the firmware front, I have UrukDroid installed, when I come into it I get a firmware upgrade notification to 2.1.8 (I had it on Android so not sure why its asked) Is it ok to update when in the developer edtion or with this overwrite UrukDroid?
Click to expand...
Click to collapse
You should ignore it. I haven't check what will happen when you allow to upgrade - I guess nothing bad (since it writes this update to different place).
Well I update but the UrukDroid stayed on 2.1.4, tried several times. Does UrukDroid get updated when a new firmware is released?
SWFlyerUK said:
Well I update but the UrukDroid stayed on 2.1.4, tried several times. Does UrukDroid get updated when a new firmware is released?
Click to expand...
Click to collapse
Yes. I try to apply changes made by Archos to new Uruk version.
$aur0n said:
Yes. I try to apply changed made by Archos to new Uruk version.
Click to expand...
Click to collapse
Thanks $aur0n,
for the answer, this was exactly my question for one new Post.
I am waiting the 0,7 for install in the internal memory, I hope came in short.
Thanks for the great work.
Best regard,
Ferenc.
I installed the new update in urukdroid, everything works fine as it should. I have no problems, the only think is that my usb port now stop working.......now.
but don´t know if it comes from the update or something else because I got my hostcable yesterday
herby68 said:
I installed the new update in urukdroid, everything works fine as it should. I have no problems, the only think is that my usb port now stop working.......now.
but don´t know if it comes from the update or something else because I got my hostcable yesterday
Click to expand...
Click to collapse
Check if USB on stock os is not working either. There is a change you are a victim of A70 or A101 USB HW error (they are something else - but in both cases USB host mode stops to work).
Everyone mod is working i geuss except for mines i don't know what am doing wrong.
i tried to mod mine with the dexter mod 1.41 and mines wont work,
1st- i download the file didn't unzip it then i sent it to the SD card and rename it "update.zip".
2nd- i did the factory wipe/reset then i select to wipe all data
3rd- i select update.zip but i notice an message saying( E. can't read from SD card, or something like that). i dont know if that is apart of the mod or what.
4th- when it is finish then i select reboot option and when it is done rebooting i get nothing new. can you help me out are do you know something that i might be doing wrong. i also did do the 1.42 patch aswell didn't work. are is there any other newer way to do it are what. Even if you can write step by step on how to do it properly.
PLEASE HELP ME OUT.
Did your a7 have a sdcard problem before the attempt ?
And even tho it sed it can't read sdcard, did it proceed to install anyway ?
yes it did go ahead with the installation, but it is during the installation process where i saw something about can't read error, i jus got it yesterday then i did the new update from elocity website. then i tried al,ost all of dexter's mod
these are the exat message i got was (E:can't open/usb/update.zip)
(E:Can't mount USB:update.zip)
then underneath that it say (Finding update package)
then it say (Wait for 5 second)
(Installation time out)
(installation aborted)
(Formatting MISC)
these are all the thing it say during installation
Does your a7 read, mount and unmount the sdcard stock?
What is the path to the update.zip?
Sorry for all the questions, I'm just trying to get on the same page
Sent from my Mynized EVo 4G
I'm having just about the same problem. Will be interested to hear any helpful suggestions. At this point, the only thing that is working is to do the factory reset and use the basic version again. I keep getting a message that "update.zip" (although I named it "Update.zip") is a bad file. I also did not get "apply sdcard:update.zip" as a menu option, only "apply:update.zip", which when clicked did read the sd card, then gave the bad file message.
update
Lemme clarify first then update. I bought the A7 in February and loaded the most current Dexter mod at that time. It's been running beautifully until this week. Over a period of days, the A7 started acting up until it was no longer usable at all. First, the BlueTooth cut out, then the WiFi, then it just got stuck and was repeatedly lighting up the Elocity logo, but never fully booting up.
Elocity support said to do the Factory reset, which I did and it was back to baseline again. Trying to install the latest version of Dexter is where my problem started. (end of history)
So, now the update for this evening: I tried every version of Dexter's mods and got the "bad" file message each time, even after downloading them again to be sure I wasn't using a corrupted copy. However, my A7 will wipe, then update with Elocity Firmware 2.0134 and read it just fine on the exact same SD card when renamed "Update.zip".
So, now I have a very frustrated boy with autism who can't do his Google Voice search anymore and the Android Marketplace doesn't let me download the apps I already bought for him. We're back to where we were when it arrived out of the box in February, but unable to restore what we had.
I have to think there's a conflict between Dexter's Mods and the new firmware, even after one wipes everything. I even tweeted Dexter (and I don't *do* Twitter!) to see if he could respond for help and am waiting for a response.
Can someone please help? Thanks!!
Sounds like your having issues with the files you download, I have gotten in the habit of not renaming the update file to just that until its on the usb card. Seen to many messages like yours if I saved one update over a prior with the same name. Try download 1.41 and 1.42 leave their names the way they are and save them to folder on your computer. Copy them bother to sd-card leaving names the same still. once both are there rename 1.41 to Update. Remove card from pc put in tablet. Use the recovery system method (press then hold power button method) do wipe, clear cache, the use update option. If this is successful which it should be delete the 1.41 file on card that you renamed to Update, this can be done on tablet or computer. Once that file is gone rename the 1.42 to Update and once again flash from recovery system.
Hope that solves your issue
Make it a habit to not save an update over top of another, though it seems like it would keep you from having to rename but for me it always seemed to corrupt the file.
thanks! I'll give that a try. I notice you said "PC", but I have a Mac ... could that be part of the issue ... downloading to Mac, then moving the file to SD or USB? (could be a stupid question, but if I don't ask, that makes me even more ignorant)
cwolfpack3 said:
thanks! I'll give that a try. I notice you said "PC", but I have a Mac ... could that be part of the issue ... downloading to Mac, then moving the file to SD or USB? (could be a stupid question, but if I don't ask, that makes me even more ignorant)
Click to expand...
Click to collapse
Do you end up with a folder or a zip file? Safari has a bad habit of extracting zips when it downloads them. Search my posts, there is a long ranting one that covers issues with both PC and Mac.
they're zipped ... I use Firefox 4.0, when the option comes up at download, I always click "save", not "open". Thanks, though.
well, problem solved. I ran Bestial's gapps patch over top of the new eLocity firmware and i have full functionality again. very happy mom here! now to reload all those apps for my boy! =D
Wow, I'm glad you found a solution...I have been following the thread and was getting worried.
I had the same problem after downloading the newest elocity update and then trying dexter's mod. I found out my problem is that I renamed the file "update.zip". If you just rename the file to" update" then it loaded fine. Not totally sure why this worked and maybe it was just my case, but maybe it will help some of you out!
bft305 said:
I had the same problem after downloading the newest elocity update and then trying dexter's mod. I found out my problem is that I renamed the file "update.zip". If you just rename the file to" update" then it loaded fine. Not totally sure why this worked and maybe it was just my case, but maybe it will help some of you out!
Click to expand...
Click to collapse
No. Your problem was that you were using a windows machine and your file extensions were hidden (I am psychic, but don't worry, I won't tell anyone your pin number). She is using a Mac, no hidden file extensions.
How do you get to the gapps patch? I'm really having trouble getting any updates on my a7. seems like its not taking anything off the sdcard. i brought a new card and I'm still having the same issue.
sbradby said:
How do you get to the gapps patch? I'm really having trouble getting any updates on my a7. seems like its not taking anything off the sdcard. i brought a new card and I'm still having the same issue.
Click to expand...
Click to collapse
bestialbub's patch for google apps (to use the market) can be found at http://forum.xda-developers.com/showthread.php?t=1019846 with the instructions
It's still working very well for us ... several weeks later.
Good luck!
Could someone tell me what is the difference I will see in upgrading to 1.5 from 1.0? I know the Almighty Lenn will probably chime in here, he always seems to have the correct answers for me.
The WiFi is fixed, more smoother, recovery mode, media updates fixed.
aaronmy said:
The WiFi is fixed, more smoother, recovery mode, media updates fixed.
Click to expand...
Click to collapse
If not having any issues with 1.0, is it a need to upgrade? Is it any faster?
mallard6453 said:
If not having any issues with 1.0, is it a need to upgrade? Is it any faster?
Click to expand...
Click to collapse
Smoother=Faster
Media update fixes = less hang ups
Try it, its great
You can read all changes from every urukdroid version here:
http://code.google.com/p/urukdroid/wiki/Changelog
For the germans:
Urukdroid Wikipedia article from me:
http://de.wikipedia.org/wiki/Urukdroid
Greets,
Lenn
mallard6453 said:
If not having any issues with 1.0, is it a need to upgrade? Is it any faster?
Click to expand...
Click to collapse
Lenn,
As normal you are here for the board. Could you please give me a step by step on how to update...the easiest way? Much props to ya bud!!
Yes I have a problem with updating, I tried with the UrukConfig app but it completely does nothing and then deletes the file. I am in need of help.
This was for all of the urukdroid betas.
aaronmy said:
Yes I have a problem with updating, I tried with the UrukConfig app but it completely does nothing and then deletes the file. I am in need of help.
This was for all of the urukdroid betas.
Click to expand...
Click to collapse
mallard6453 said:
Lenn, As normal you are here for the board. Could you please give me a step by step on how to update...the easiest way? Much props to ya bud!!
Click to expand...
Click to collapse
1) Download this file: http://sauron.pourix.com/UrukDroid/UrukDroid-1.5/UrukDroid-1.5B3-upgrade.tbz2
2) Copy that file at /data/urukupdate (with a root explorer)
3) Wait 5-10 minutes
4) your archos will restart and flash the new rootfs
Greets,
Lenn
Lenn said:
1) Download this file: http://sauron.pourix.com/UrukDroid/UrukDroid-1.5/UrukDroid-1.5B3-upgrade.tbz2
2) Copy that file at /data/urukupdate (with a root explorer)
3) Wait 5-10 minutes
4) your archos will restart and flash the new rootfs
Greets,
Lenn
Click to expand...
Click to collapse
Thanks Lenn, in the process of downloading now..will update on how it goes
Thanks, should i reset my android?
aaronmy said:
Thanks, should i reset my android?
Click to expand...
Click to collapse
You dont have to but if you have much rubbish on your archos i would prefer this
Thanks for update procedure.
Lenn said:
1) Download this file: http://sauron.pourix.com/UrukDroid/UrukDroid-1.5/UrukDroid-1.5B3-upgrade.tbz2
2) Copy that file at /data/urukupdate (with a root explorer)
3) Wait 5-10 minutes
4) your archos will restart and flash the new rootfs
Greets,
Lenn
Click to expand...
Click to collapse
Thanks Lenn, worked like a charm...only downfall is now I have to buy the Cinema add in to watch my videos.
worked flawlessly
After I updated my 101 rebootet normal but after the first second there are forced closes of the launcher, no chance to do something. How can i downgrade back to 1.0 or fix this?
GPHENOM said:
After I updated my 101 rebootet normal but after the first second there are forced closes of the launcher, no chance to do something. How can i downgrade back to 1.0 or fix this?
Click to expand...
Click to collapse
Did you update from beta 2 to beta 3?
Anyway,
For downgrade to 1.0:
-Boot up with volume button down
-Recovery System>>Repair Device>>Format Disk
-After the wipe you have to connect your archos to your pc and copy the lastest *.aos file from archos.com (firmware, look under downloads)
-Just install urukdroid 1.0 normally as you did
Greets
Lenn
I updated from 1.0 to 1.5B3 without any steps.
Is there no way to keep all my stuff?
GPHENOM said:
I updated from 1.0 to 1.5B3 without any steps.
Is there no way to keep all my stuff?
Click to expand...
Click to collapse
Hm...
there is a way to backup your apps (just the apps no savings) but you need a linux distro to do so
if you have linux do this:
Connect your archos with your pc
Boot with volume down button hold down
Recovery System >> (i think..)Repair Device>>Start Usb MSC
You should see 3 different devices connected to your linux pc
I dont know which it is, but you just should search a directory like "system/app"
In this folder there are all your games apks you can copy these to your pc and do my instructions above..
After that just install the apks on your new urukdroid system
Greets
Lenn
Ok, so I have to reformat...
How do i have to update next time?
GPHENOM said:
Ok, so I have to reformat...
Click to expand...
Click to collapse
Okey
How do i have to update next time?
Click to expand...
Click to collapse
Normally it works with this:
Download the update file
Put it into data/urukupdate
Wait 5-10 minutes
Your archos will reboot and flash the new rootfs
Greets
Lenn
GPHENOM said:
After I updated my 101 rebootet normal but after the first second there are forced closes of the launcher, no chance to do something. How can i downgrade back to 1.0 or fix this?
Click to expand...
Click to collapse
I had exactly the same problem with the launcher. after installing from UD1.0 I re_installed ud1.0 as a completly fresh install as per the UD wiki install instructions, then placed update file as per lenn's instructions. it worked first time after this. keep perservering, I am finding 1.5 is much better, less random reboots and lost wifi.
Hello, guys.
I want back to stock because of service reasons. I have cyanogenmod 3.7.0, android version 2.3.6
Now I downloaded the file (6.5 update) from HTC sites, and I'm curious about few things. The file contain 210 mb or so, and on my HTC I have 199 mb left on the internal memory - could this occure any problems regarding the install?
Also, I downloaded Minitool partition wizzard program to delete all partitions on my SD card and return back to FAT32.
Is this a hard task? Please, I really need help!!
Also after all this has been done, should I turn off the phone, hold volume down button and power on and get into boot mode, plug in USB, wait for USB-recognision, and then just run the file I downloaded from HTC?
Please help!!
#thanks to tmihai20 for help!
Nicuu said:
Hello, guys.
I want back to stock because of service reasons. I have cyanogenmod 3.7.0, android version 2.3.6
Now I downloaded the file (6.5 update) from HTC sites, and I'm curious about few things. The file contain 210 mb or so, and on my HTC I have 199 mb left on the internal memory - could this occure any problems regarding the install?
Also, I downloaded Minitool partition wizzard program to delete all partitions on my SD card and return back to FAT32.
Is this a hard task? Please, I really need help!!
Also after all this has been done, should I turn off the phone, hold volume down button and power on and get into boot mode, plug in USB, wait for USB-recognision, and then just run the file I downloaded from HTC?
Please help!!
#thanks to tmihai20 for help!
Click to expand...
Click to collapse
I would guess those steps are fine, and how would your internal storage have any effect on flashing a new ROM which overwrites it anyway? But yeah, you should be good to go now.
Nigeldg said:
I would guess those steps are fine, and how would your internal storage have any effect on flashing a new ROM which overwrites it anyway? But yeah, you should be good to go now.
Click to expand...
Click to collapse
Alright, thanks!
But I should unmount the SD-card by doing it the safe way, delete partitions, make FAT32, mount in - turn off phone and then flash the rom?
This is the rom i downloaded from htc
RUU_Leo_S_HTC_NOR_3.14.409.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
At least this is what it's named. Thanks for any help!!
@OP: Please go to advanced edition and change the title pf the thread properly. Thanks
3. Post only using a clear subject and message.
You're most likely to receive a helpful answer to your question if you use a short subject title that describes your problem and a message that explains in detail what your problem is and what you've tried to solve it.
Click to expand...
Click to collapse
poyensa said:
@OP: Please go to advanced edition and change the title pf the thread properly. Thanks
Click to expand...
Click to collapse
Oh, I'm sorry. I would, but I can't figure out (sorry, yes I'm a nòob)
Nicuu said:
Oh, I'm sorry. I would, but I can't figure out (sorry, yes I'm a nòob)
Click to expand...
Click to collapse
Go to your post 1 at top of this page, click edit then click advanced and change the title.
Try installing the MIUI version it works great on the HD2, i had many issues with wm6.5 and other NAND. I have been using MIUI for about 1 year now, weekly updates and very stable
alanman said:
Try installing the MIUI version it works great on the HD2, i had many issues with wm6.5 and other NAND. I have been using MIUI for about 1 year now, weekly updates and very stable
Click to expand...
Click to collapse
Oh yeah? Do you have the t-mobile version of htc HD2?
And by NAND, you mean other roms probably.
Could perhaps give it a try, but I think my phone has a motherboard problem, as it overheats very fast.
Haven't you had any problems with MIUI? which miui do u use?