Database Users

[SOLVED] TG01 US ROM Update? (Error occurred during system reset)

Hi everyone, if you are having trouble with upgrading the ROM on the US TG01, then this is your topic! Here are the few things you must do the update the ROM:
-Fully charge your battery
-Format your MicroSD card to FAT32, then create a folder called "prg" (don't type the speech marks), and place your ROM in there, and don't forget to change it's extension to .enc from .tsw
-Remove the black tab under the SIM slot, beware, pull it upward, not forward
-Can you see the three "yellow circles" on the SIM slot? The first and third one are what we wanted the connet together. Link/connect them with a wire
-Push the power button for 10 seconds
-Wait a little bit
Done!
Don't thank me, thank leeston for all his continous support, hey, thank you again man!

El Diablo said:
Hi everyone, I've just tried with the mirolg's Sense included English ROM to upgrade the software version on my TG01, but it's just restarting, so nothing changes, any ideas?
Click to expand...
Click to collapse
Not enough detail for me to help you. Please reply to the following.
1. Which method did you use, short pin or sddl+?
2."just restarting", do you mean that the sd downloader doesn't start and goes straight to Toshiba screen or it starts then resets the device making no changes?
3.If the sd downloader starts, does it say 'Variant Invalid' briefly before it restarts?
If you dont know what shortpin or sddl+ means then look HERE.

Sorry, I did not informed you very well,
I've used the sddl+ method. Clicking on the sddl+ restarts the device, just like a soft reset. If I click on the SD downloader, then it says "Invalid filename".
Thanks for the reply.

Now the SD Downloader says "Error occurred during system reset" when I click Download.
Err?

I'm wondering, is that too difficult to help a mate who is having a problem? PLEASE???

El Diablo said:
I'm wondering, is that too difficult to help a mate who is having a problem? PLEASE???
Click to expand...
Click to collapse
I assume you've read the sticky about rom flashing and are still having problems, follow the guide below and let me know how it went.
Download my ROM from HERE.
Download 7Zip from HERE.
Download sddl+ from HERE.
1.Install 7Zip
2.Right click "TG01WP_StonromR7.7z" and choose "7Zip -> Extract to "TG01WP_StonromR7.7z\"" (This will create a folder called "TG01WP_StonromR7" in the same place as the downloaded file)
3.UnRAR sddl+
4.On your storage card create a folder named "prg" (no speech marks)
5.Copy "TG01WP_Stonrom.tsw" to the "prg" folder on your storage card.
6.Copy sddl+ to the root of your storage card. (root = not in a folder, just straight on the card)
7.Open file explorer and go to your storage card and open sddl+
8.You will now have a white screen, with the text "sd downloader - do not remove battery or storage card" (it may not say exactly this, i can't remember just now)
9.Wait
10.Wait a bit more
11. The phone should restart after a bit of waiting, the first boot can take a long time. Be patient.
I only say use my rom because i know it flashes and boots on my 2 devices.
If this doesn't work, pay attention to the on screen messages during flashing and post them here word for word, along with which rom you tried and any other info that you can provide.

Thanks again for your help, downloading right now, I'll inform you about the process.

It doesn't work, only says "Invalid filename" if I click on the TG01_SDDL.
If I click on the tg01_sddl+, the device just restarts, no further changes, still the same problem.
???
BTW, I changed the ROM's name to TG01WP_00.tsw, now the SD Downloader says "Error occurred during system reset".

El Diablo said:
It doesn't work, only says "Invalid filename" if I click on the TG01_SDDL.
If I click on the tg01_sddl+, the device just restarts, no further changes, still the same problem.
???
BTW, I changed the ROM's name to TG01WP_00.tsw, now the SD Downloader says "Error occurred during system reset".
Click to expand...
Click to collapse
Only thing i can think of is to rename the .tsw to .enc.

I tried that too. It doesn't work neither.
BUT,
Thank you very, very much for your afford.

Post edited, detailed informations added.

Have you tried updating you TG with the manufacturer update instead of a cooked ROM? Just to prove that flashing is possible on your device.
I would suggest using the official update and SD Downloader from Toshiba.
Please post back with your experiences.

Yes, actually I've tried with the TG01WP-WM6.5-UK file. Result: Same

El Diablo said:
Yes, actually I've tried with the TG01WP-WM6.5-UK file. Result: Same
Click to expand...
Click to collapse
Where did you get the file? The correct file name should be "TG01WP_5005000176.tsw" or "TG01WP_5005000167.tsw" not "TG01WP-WM6.5-UK"
Just to clarify, is it an Orange UK TG01? Did you buy it from a shop or second hand?

I got the file from Toshiba's official web site (Europe).
Err, I don't know where my device is from, but I can assume you it's a TG01, not the "A" one.
Here, the file is included on the file I've downloaded:
TG01WP_5005000176.enc

Ok, the phone is from USA, I guess it has a different software version updater.

El Diablo said:
Ok, the phone is from USA, I guess it has a different software version updater.
Click to expand...
Click to collapse
The only thing i can see that is left now is to use the short pin method. Details are in the guide to flashing tut in the sickies. You will need to make sure the radio versions are the same first though.
Start\settings\system\about\version info. Where it says radio version is what you need to know. Mine is "5005.1600.05" so would be referred to as 1600 here. If you let me know what radio you have i will upload a ROM with the correct radio for you.
This may take me a little while though.

Radio version is 5001.0000.5319
Very different, heh?

El Diablo said:
Radio version is 5001.0000.5319
Very different, heh?
Click to expand...
Click to collapse
I'll try and find a rom with that radio, for now though try renaming the tsw to .enc and try short pin.
I think some phones released to America have different radio hardware than UK phones. I'm not sure if this is the case for the TG01 though. I think we have a few American forum users. Maybe they could help if they are reading this?

Anyway, I really appreciate your help and support.

[TUT] How to Unbrand / Debrand your HTC HD2 with PSAS Goldcard [2010-11-29]

Tired of waiting until your service provider releases HTC updates for your branded phone?
Here comes your step by step guide on how to unbrand or debrand your HTC HD2/Leo using a PSAS Goldcard.
(Thanks go to svc und oliverweidel)
Introduction:
What does a Goldcard do? Mark's post answers this best:
"All a GoldCard will do is bypass the carrier ID check when you attempt to flash a stock rom via the microsd card that you wrote the GoldCard to. A GoldCard [as such] won't unbrand your phone, that is only acomplished by flashing an HTC Stock Rom [with your Goldcard]. If you flash a carrier's Stock Rom [with your Goldcard] then it will still be branded with whatever that carrier added to it. That means that you have to use that same card everytime you want to flash a stock rom and you have to use the same method to flash it (via the same microsd card). It wont sim unlock your phone and it wont let you flash any other roms apart from stock roms".
Note:
If you experience problems:
- Check first whether you have correctly followed each step carefully
- Read the Troubleshoot Section below
- Search the thread for a similar problem
- Post a question (Please do not send me a PM with support requests but post them. Thank you!)
A. Prerequisites:
A.1. Micro SD card (no SDHC [HighCapacity], it needs to be <4GB)
A.2. The "PSAS" Software
A.3. PC with ActiveSync or MobileDeviceCenter Connection to your HD2 (Guest is good enough)
B. Make your SD Card a Gold Card:
B.1. Back up your system (especially your SD-Card!! for a Goldcard you have to format your SD-Card)
B.2. Format your Micro SD card with FAT32
B.3. Insert your formatted SD Card into your HD2
B.4. Connect your device to your PC (ActiveSync/MobileDeviceCenter)
B.O.1. Option 1: PSAS Full Version:
..O.1.1. Buy your PSAS Full Version (30€). http://psas.revskills.de/?q=payment
..O.1.2. Following the link in the registration confirmation e-mail, download, install and activate PSAS
..O.1.3. Start PSAS (needs administrator rights)
..O.1.4. Goto "Calculators/Generators" - "Generate HTC Goldcard"
..O.1.5. Select Device Key “LEO”
..O.1.6. Click on "Get SD Card Serial from WINCE Device"
..O.1.7. Choose the right SD Card (note the Size under SD Card Info)
..O.1.8. Click on "Save Goldcard Image to WINSCE SD" (Alternatively, you can save the Goldcard image to file and write the image later - see Option 2.7)
..O.1.9. Now your Goldcard is ready
B.O.2. Option 2: PSAS free Version:
..O.2.1. Download an install the PSAS Free Version: http://revskills.de/downloads/revskills.zip
..O.2.2. Start PSAS (needs administrator rights)
..O.2.3. Goto "Hardware Forensics" - "WINCE SD Card Utils"
..O.2.4. Click on "Get Serial and Disk ID".
..O.2.5. Choose the right SD Card (note the size)
..O.2.6. Copy the displayed CID (i.E. 9E000000400000000000020002000000)
..O.2.7. Send the CID to a friend owning the full version to prepare your image
..O.2.8. If you don’t know one, send a PM to either "lyriquidperfection", "oliverweidel", "mskip", "sirsmiles" or me ("pcwe")
..O.2.9. Once you have your image, click on “Write Image File”
..O.2.10. Select the image you received (Goldcard.img)
..O.2.11. Now your Goldcard is ready
**********************************
Links to images for frequently used CIDs:
GoldCard_9B000000400000000000020002000000.img
GoldCard_9D000000400000000000020002000000.img
GoldCard_9E000000400000000000020002000000.img
**********************************
C. Flash HTC Stock ROM:
C.1. Download your HTC 3.14 Stock ROM
C.2. Extract your Stock ROM (RUU_Leo_S_HTC_XXX_3.14.XXX_Radio_15.42.50.11U_2.1 5 .50.14_LEO_S_Ship.exe)
C.3. Copy RUU_signed.nbh to your Goldcard and rename it to LEOIMG.nbh (Use the “Explore” Feature of ActiveSync / MobileDeviceCenter)
C.4. Switch Off your device (or remove the battery)
C.5. Press VOL Down and Switch Device on to enter Bootloader
C.6. Bootloader loads your Goldcard (grey screen) and flashes every part of your HD2 (Bootloader, Radio, OS…) Takes up to 10 mins.
C.7. When finished, Reboot your device (remove/insert battery or press red button)
C.8. Congratulations, now your HD2 is unbranded!!
D. Install favored ROM (Artemis!):
D.1. Download your favored ROM
D.2. Connect your device to your PC (ActiveSync/MobileDeviceCenter)
D.3. Run SSPL_RUU.exe with Artemis v40 RUU_Signed_0xxx.nbh in the same folder and follow the instructions
D.4. Hard reset (Press VolUp+VolDown and still holding both press PowerOn and follow the instructions)
D.5. Boot to homescreen
D.6. When on homescreen –> Softreset
D.7. For more information, read the first page of the Artemis Forum
*** Troubleshooting ***
In case you experience a problem check these points:
1. Is your card a no SDHC Card? -> SDHCCards (all cards 4GB or bigger) often cause problems, especially many of the no- or low-brand cards.
Then, follow these steps again:
2.1. Format your card again, using a Windows PC instead of the HD2's card utility.
2.2 File System must be FAT32 and allocation unit size 4096 Bytes
2.2. Make sure your card has no name (no Volume Label).
2.3. Double check your drive ID. You need the CID of drive ID 07.
2.3. Double check your CID.
3.1. Download your HTC Stock ROM a second time.
3.2. Extract RUU_signed.nbh from the newly downloaded Stock ROM again.
3.3. Rename RUU_signed.nbh to LEOIMG.NBH.
3.4. Copy LEOIMG.NBH to your newly formatted and try again.
4. It didn't help? Post a support request on this thread with a detailed description of your problem and when it occurs.
Note: Do not send me a PM with support requests but post your problem here. More persons can help you and others benefit from it as well. Thank you!

Nice job pcwe! Hope this will help many LEO owners to flash the great Artemis v.40 by Sir sternas...
So, HSPL actually will not be neccessary to flash 3.14 Stock roms (SPL 3.03...)

oliverweidel said:
Nice job pcwe! Hope this will help many LEO owners to flash the great Artemis v.40 by Sir sternas...
So, HSPL actually wont be neccessary to flash 3.14 Stock roms (SPL 3.03...)
Click to expand...
Click to collapse
No, HSPL does not go well together with Stock Rom 3.14/Artemis40.
But using Goldcard, you don't need to remove HSPL before starting. It removes everything on the device.

Howdy,
very nice thread!
One question:
HSPL will be overwritten through this procedure - thats clear as eggs in eggs - but will the stock rom from sd card start to flash without hspl?
Maybe stupid, but I thought, I read something about this somewhere...
Regards
Shinson

Thanks pcwe. The goldcard image you sent worked perfectly. I was able to install the stock 3.14 ROM on my Telstra HD2, and then Artemis v 40.0 ROM

Shinson said:
Howdy,
very nice thread!
One question:
HSPL will be overwritten through this procedure - thats clear as eggs in eggs - but will the stock rom from sd card start to flash without hspl?
Maybe stupid, but I thought, I read something about this somewhere...
Regards
Shinson
Click to expand...
Click to collapse
with this Goldcard you can flash every rom on your HD2 you dont need anything on hd2. If HTC Build the HD2 the first flashwas with debug same as Goldcard.

tvailment said:
Thanks pcwe. The goldcard image you sent worked perfectly. I was able to install the stock 3.14 ROM on my Telstra HD2, and then Artemis v 40.0 ROM
Click to expand...
Click to collapse
I'm glad it worked. Thanks for the feedback.

Shinson said:
Howdy,
very nice thread!
One question:
HSPL will be overwritten through this procedure - thats clear as eggs in eggs - but will the stock rom from sd card start to flash without hspl?
Maybe stupid, but I thought, I read something about this somewhere...
Regards
Shinson
Click to expand...
Click to collapse
A gold card comes with its own boot environment. Its only kicked on by your bootloader (whatever version) and flashes all: Your current bootloader, radio, OS etc. Aftewards you have an unbranded HTC device like one bought in shop.

I, yesterday, tried the "gold card-method", following step by step the tutorial.
But, unfortunately, flashing process stopped at "Os" level.
I went back to artemis V37, but i'll try again, perhaps sdcard issue ?
Thank you for your tutorial, pcwe.

valeloflo said:
I, yesterday, tried the "gold card-method", following step by step the tutorial.
But, unfortunately, flashing process stopped at "Os" level.
I went back to artemis V37, but i'll try again, perhaps sdcard issue ?
Thank you for your tutorial, pcwe.
Click to expand...
Click to collapse
Try formatting your card on Windows PC (it must be FAT32). Then insert it into the device, but do not format it again. Then follow the steps to get to your CID and send a PM for another Goldcard image.

Sorry but I'm just a bit confused why you created a thread with the heading as [TUT] which has no tutorial apart from a link to the artemis roms thread which then links to another thread that gives instructions on flashing via a goldcard (which has already been written a longg time ago). I commend oliverweidel on offering to make goldcards for members as I have made about 20 in the last 2 days and it does get a bit tedious lol.
Maybe you could just explain to me why this thread is labeled as a tutorial when it has no tutorial when its really just a link to a tutorial.. Sorry im not trying to be mean or flame this thread I'm just a bit lost as to what its propose is lol
Ohh and I'm on my phone right now using xda app so if something didn't display and I actually missed the proper tutorial then i humbly apologize for this post lol.
Mark.
Sent from my HD2 using XDA App

mskip said:
Sorry but I'm just a bit confused why you created a thread with the heading as [TUT] which has no tutorial apart from a link to the artemis roms thread which then links to another thread that gives instructions on flashing via a goldcard (which has already been written a longg time ago). I commend oliverweidel on offering to make goldcards for members as I have made about 20 in the last 2 days and it does get a bit tedious lol.
Maybe you could just explain to me why this thread is labeled as a tutorial when it has no tutorial when its really just a link to a tutorial.. Sorry im not trying to be mean or flame this thread I'm just a bit lost as to what its propose is lol
Ohh and I'm on my phone right now using xda app so if something didn't display and I actually missed the proper tutorial then i humbly apologize for this post lol.
Mark.
Sent from my HD2 using XDA App
Click to expand...
Click to collapse
Thanks for your input. I'm glad you mentioned that you're working on your phone. Maybe I misunderstand what a tutorial is. When you watch it on a PC, though, you see a tutorial that includes 4 sections with a total of 43 steps (including 2 options). I only link to the PSAS page and to the Artemis' frontpage. So IMHO this is a tutorial. Since you are a very experienced XDA moderator, I hope you get to see the full thread and let me know what you think about it. I'm looking forward to receiving your feedback.
(And yes, I made 15 Goldcards over the weekend, so I'm happy we can share the load )

When I turn the phone off after following all the steps and hold volume down and press power button the bootloader screen laods but it doesnt load the LEOIMG.nbh.
At the bottom it just says 'Serial'.
What am I doing wrong? I have followed all the instructions.
Although maybe I didnt get the correct Goldcard image? I went to the psas website and clicked on 'Free Goldcard gererator'
You then enter your email and sdcard id and you get emailed a goldcard image. Does this one not work?
I also got the phone to format the sd card as it does format it to FAT32

pcwe said:
Thanks for your input. I'm glad you mentioned that you're working on your phone. Maybe I misunderstand what a tutorial is. When you watch it on a PC, though, you see a tutorial that includes 4 sections with a total of 43 steps (including 2 options). I only link to the PSAS page and to the Artemis' frontpage. So IMHO this is a tutorial. Since you are a very experienced XDA moderator, I hope you get to see the full thread and let me know what you think about it. I'm looking forward to receiving your feedback.
(And yes, I made 15 Goldcards over the weekend, so I'm happy we can share the load )
Click to expand...
Click to collapse
Ok I have to apologise as I just viewed this thread on my pc and it shows the whole of your first post including all the steps and yes I would regard it as a Tutorial
For some reason when viewed on the xda app it shows absolutely none of your tutorial apart from:
A. Prerequisites:
1. Micro SD card (non HCSD that is
Softreset
7. For more information, read the first page of the Artemis Forum:
http://forum.xda-developers.com/showthread.php?t=612580
Click to expand...
Click to collapse
Maybe its all the quotes in your post but you can understand why I was confused when I first saw it lol
I may have to contact the creator of psas as ALOT of people are now asking for GoldCards and at the moment they can only be created with a paid for version of the program so if he has objections about using it to make goldcards for anyone who asks then it may have to stop. I originally asked him about 6 months ago for permission to make goldcards for members who had mistakenly flashed a stock rom via sd card whose spl wasnt covered by HardSPL (to get them out of a hole and allow them to flash a rom with a lower SPL). Looks like people are now wanting goldcards purely to change stock roms for which they should really be using a paid for version of psas.
I will try to get hold of him over the next few days and ask if he has objections to making goldcards for users who havent already buggered their phones up then I will let you know.
Keep up the good work
Mark.

neonplanet40 said:
When I turn the phone off after following all the steps and hold volume down and press power button the bootloader screen laods but it doesnt load the LEOIMG.nbh.
At the bottom it just says 'Serial'.
What am I doing wrong? I have followed all the instructions.
Although maybe I didnt get the correct Goldcard image? I went to the psas website and clicked on 'Free Goldcard gererator'
You then enter your email and sdcard id and you get emailed a goldcard image. Does this one not work?
I also got the phone to format the sd card as it does format it to FAT32
Click to expand...
Click to collapse
That doesn't work, its for Android only (see the title of the page). You have to follow the instructions on the first page of this thread. You either need to by PSAS (Option1) or ask somebody that has it (Option2) to generate one for you.

mskip said:
Ok I have to apologise as I just viewed this thread on my pc and it shows the whole of your first post including all the steps and yes I would regard it as a Tutorial
...
I may have to contact the creator of psas as ALOT of people are now asking for GoldCards and at the moment they can only be created with a paid for version of the program so if he has objections about using it to make goldcards for anyone who asks then it may have to stop. I originally asked him about 6 months ago for permission to make goldcards for members who had mistakenly flashed a stock rom via sd card whose spl wasnt covered by HardSPL (to get them out of a hole and allow them to flash a rom with a lower SPL). Looks like people are now wanting goldcards purely to change stock roms for which they should really be using a paid for version of psas.
I will try to get hold of him over the next few days and ask if he has objections to making goldcards for users who havent already buggered their phones up then I will let you know.
Keep up the good work
Mark.
Click to expand...
Click to collapse
Thanks for your feedback and for checking with bkerler (last week, he was in vacation). I'm very much interested in his/your feedback.

pcwe said:
Thanks for your feedback and for checking with bkerler (last week, he was in vacation). I'm very much interested in his/your feedback.
Click to expand...
Click to collapse
Maybe its his business model...

Thank you
Thank you very much for the goldcard pcwe, it worked perfectly.
I already installed Artemis V.41 on my phone without problems.
Thanks again.

Guys, last night I got flooded with requests for Goldcards. I case your request is still unanswered, PM me again.

Feedback appreciated
Did your Goldcard work? Drop a line here. Thanks.

root for Desire Z 1.72 with non standard CID's

Hi @all,
as my thread was closed but i still want to thank you and share my experiences, i'll create this new thread.
It belongs to http://forum.xda-developers.com/showthread.php?t=926835 but maybe also can help other guys to get root on theire updated unrooted phones.
this weekend i did the work and finaly i can say:
on my phone I AM root!!!
Just to thank you and maybe help some less experienced people here, i will give you a small overview and some hints for changes to be done for the tutorials to work with the desire z.
so thanks for your help, it worked like a charm.
For the backup i used myBackup as it doesnt require root for backing up and it restored my data as i wished. So myBackup is the product i can recomment. It is available as 30days-demo and so is enough for the process of down- and reupgrading.
Another thing to remind in the following steps is: at any time usb-debugging works with the htc-sync-mode, too. so use this mode, as usb-mode at any time, as in another case (harddisk-mode) the phone cant access the sdcard anymore.
After the backup i removed the card from the phone and worked on with a blank one.
The following both tutorials i used:
Goldcard: http://forum.xda-developers.com/showthread.php?t=572683&highlight=gold+card
Down-Reupgrade: http://wiki.cyanogenmod.com/index.php?title=HTC_Desire_Z:_Rooting
You may also use this thread:
http://forum.xda-developers.com/showthread.php?t=832503
This one describes all the goldcard und down/upgrade-stuff explicitly for the desire z, but it looks a bit more hacky and seems to be good for people already experienced with hex-editors and rooting, also it doesnt mention, that the first 2 chars of the cardcode neet to be converted to "00", thats why i recommended the other tutorials.
I formated it to fat32 and put it into the phone, this step wasnt mentioned in the tutorial, so i tell it to all who dont know.
Then i read the card-ID with adb. Here is another problem with the tutorial. The DesireZ had no mmc1 with valid data, for the desire z you have to read the cid from mmc2!!! (just change the path from the tutorial) (so: adb shell cat /sys/class/mmc_host/mmc2/mmc2:*/cid)
After that remove the card from the phone and reinster into the cardreader and do the patching with the image and the hexeditor.
Then youre done with the first tutorial (in step 18) and can move on with the cyanogen one (as it seems more trustful )
So now reinsert into the phone and copy the firmwareimage and then "update" to the older version (was very nervouse while that, but succeeded finaly )
If you get an Error in "/data/local/tmp/misc_version -s 1.33.405.5" (i got one like "unable to backup") you have not inserted the sdcard or used the filetransfermode, so the card is not mounted into the phones filesystem.
If so, switch to htc-sync-mode and try the command again.
When in the firmwareupgrade-mode after the reboot, you can navigate with vol-up and vol-down and enter with the powerkey.
After permroot install the rom of your chioce, best one with allready permroot done, that saves work
i decided for the virtuous as it has sense, any other/better rom someone can recomment???
When done that, too, at first reinsert the original sdcard with your backup on and restore that backup, as it overwrites existing data, it would be best to avoid any sms or calls to arrive before you restored the data, as those calls and messages will be lost.
After that you can set up all things you want and finaly you are done with a new 1.72 rooted and unbranded phone.
Thanks all for your help especially to guhl for giving me those links and taking the fear from me of bricking my phone....
Yours TK

tk-germany said:
The following both tutorials i used:
Goldcard: http://forum.xda-developers.com/showthread.php?t=572683&highlight=gold+card
Down-Reupgrade: http://wiki.cyanogenmod.com/index.php?title=HTC_Desire_Z:_Rooting
I formated it to fat32 and put it into the phone, this step wasnt mentioned in the tutorial, so i tell it to all who dont know.
Then i read the card-ID with adb. Here is another problem with the tutorial. The DesireZ had no mmc1 with valid data, for the desire z you have to read the cid from mmc2!!! (just change the path from the tutorial) (so: adb shell cat /sys/class/mmc_host/mmc2/mmc2:*/cid)
Click to expand...
Click to collapse
There's a Vision-specific Gold card guide at http://forum.xda-developers.com/showthread.php?t=832503&highlight=debrand , which does uses mmc2, you might want to link that one up instead ?

steviewevie said:
There's a Vision-specific Gold card guide at http://forum.xda-developers.com/showthread.php?t=832503&highlight=debrand , which does uses mmc2, you might want to link that one up instead ?
Click to expand...
Click to collapse
Done that, but also told in the first post, why i used the other ones
btw: why you still use version 1.34? Better than 1.7?
any good desire z roms with sense anyone can recommend?

tk-germany said:
btw: why you still use version 1.34? Better than 1.7?
any good desire z roms with sense anyone can recommend?
Click to expand...
Click to collapse
I only use 1.34 because I haven't got round to trying anything else yet. But it works well enough not for me to want to get away from it as soon as possible. Virtuous is a popular Sense-based ROM, and I may well give that a try (it's based on 1.72 as well).

I use the 1.72 virtuous and feel good with it, as i have the impression that it is a bit smoother and the batteryusage seems to be a bit improved, but dunno if thats realy cuz of the new rom.
Only disadvantage, max volume doesnt seem to be bettered up, hope that gets solved soon
hoped to hear of any other rom with that solved and maybe packed with some nice gimmicks
Sent from my HTC Vision using XDA App

Assalam aleikum,
Hi Iam using a german vodaphone 1.72 rom and want to downgrade to get permaroot and so on for a brother,
I Tried to get the downgrade working with this scripture but it dont works i ve done all the way down from goldcart with hexediting stuff and so on but when i reach the point to flash the 1.3 rom on hboot i get everytime a wrong cid error message and he wont install
is there a way to change the CID? for vodafone phones?

hi
i've been trying to downgrade my girlfriends new desire z (bought in a german store). but everytime i tried to flash the PC10IMG.zip in the bootloader via fastboot, it startet searching for it, found it, checked it and then brought up an error "incorrect CID", which i didn't quite understood. i checked the infocid and it's HTC__102, so i did not have to do the goldcard stuff. but i still did not get it working. solution was: not every PC10IMG.zip you can find in the various threads about downgrading the desire z seems to work, for me only the one found in the thread http://forum.xda-developers.com/showthread.php?t=905261 worked.
just wanted to let you know, in case anyone is searching for a solution for this problem

How To: EB13 Froyo Download/Install and OTA!

- It has already been confirmed several times, the 2 files are EXACTLY the same (OTA and the 91.14mb file from samsung)
- Performing the update this way did not destroy any of my data, texts, applications, contacts, etc. Everything was exactly the same, except for the new version of Android. You must have a stock phone or the update most likely will not work.
Click to expand...
Click to collapse
"Force OTA"
UPDATE:: IF you cannot for whatever reason load the file to your SD Card, gmail yourself the link (below) and download it using Dolphin HD browser. I just confirmed it works on my phone, however, it does not work with the stock browser. Check the market for Dolphin HD, it's free. Client mode is set to desktop, which is under settings once in Dolphin HD. I was able to download the update.zip to the phone rather quickly over 4G Other browsers may work, I prefer that one though. Doesn't hurt to try. The stock one will not save the file, though will navigate to it.
As I first posted yesterday, there are [now 3] ways of downloading and installing the new EB13 Froyo release. If you have a Windows PC, there is a new utility that Samsung has released to flash the phone via PC. I personally couldn't get it to run on my Win 7 x64 laptop due to the enlarged font I run on my high-res laptop screen. Additionally, the 200MB file will wipe your phone completely clean. If you have a "trouble free" factory install of the current 2.1.1, the update method contained here is your best bet. Trouble free meaning that only bugs of the software are present. If you have issues above and beyond that of all other eclair users, you may want to completely wipe your phone.
The easiest and fastest method is to visit Samsung's Sprint Epic download page here http://www.samsung.com/us/support/downloads/SPH-D700ZKASPR and click the "Software" link (Manuals is the default landing page) and download the 91.14MB File labeled as for MAC OS. You will notice the much larger windows download (200MB) which is not needed, and may not work.
After you download the zip file, copy it over to your SD Card in your phone by either hooking it up and mounting it as you would normally do to copy files to your phone, or as I did, place the Micro SD card into an adapter and insert it into your computer. Copy the .zip file you downloaded onto the SD card; do not place it into any directory.
With your phone powered off, insert the SD Card back into the phone and replace the battery cover. Now, while holding both volume up and volume down rocker buttons (yes, you can push both at the same time), hold the camera button down as well and then press and hold the power on key. You will hold all 4 buttons on the phone until it boots into the flash menu.
Use the volume down button to scroll to..
"Apply SDcard: Update.Zip"
Push the Home key on the bottom of the phone and the update will commence.
Once it's complete, the phone may reboot into the menu again, at which time you select "Reboot" and hit the home key again.
The phone may reboot a few more times after it's first boot, and it may take a few minutes to fully get up and running. If it acts strange for a few minutes, this is normal.
Performing the update this way did not destroy any of my data, texts, applications, contacts, etc. Everything was exactly the same, except for the new version of Android. You must have a stock phone or the update most likely will not work. No ROMS, etc may be installed for the update to work. Before doing the update, go through your applications and uninstall anything you don't want / use.
You may also wait for the OTA update, but it will take a while to download, use up your battery, and you have to wait longer. It has already been confirmed several times, the 2 files are EXACTLY the same (OTA and the 91.14mb file from samsung) DO NOT waste time using a link to another file, there is no point and only risk in obtaining the file from somewhere else.
Before I began, I copied things off of my SD card that I wanted and performed a format on it. If you have apps installed on the SD Card, and you choose to do this, you may need to reinstall them. Once the update was complete, I copied the directories and files back to the SD Card.
(STICKY worthy!) No other post has this info immediately at hand.

Bump. I am seeing new posts answered by this.......

i don't know

http://forum.xda-developers.com/showthread.php?t=963652
It's already been done...

Eh, it's not as concise, and also not borrowed. This is the easy, "don't do anything but update my OS" method. NOTHING is needed except the ability to load the Update.zip to the SD Card.

NoSoMo said:
Eh, it's not as concise, and also not borrowed. This is the easy, "don't do anything but update my OS" method. NOTHING is needed except the ability to load the Update.zip to the SD Card.
Click to expand...
Click to collapse
Personally, I think Whosdaman's version is much more concise. Perhaps you meant yours is more convoluted or wordy? But hey, potato, tomato, right?

NoSoMo said:
Eh, it's not as concise, and also not borrowed. This is the easy, "don't do anything but update my OS" method. NOTHING is needed except the ability to load the Update.zip to the SD Card.
Click to expand...
Click to collapse
Do you know what the word concise means? And what does borrowed mean? Cause you do know I am the one who wrote the article for BriefMobile.com
And thank you to the post above me

Whosdaman said:
Do you know what the word concise means? And what does borrowed mean? Cause you do know I am the one who wrote the article for BriefMobile.com
And thank you to the post above me
Click to expand...
Click to collapse
You're welcome. And I'm guessing he was referring to how you linked to Briefmobile and outside files?

NoSoMo said:
Perhaps you should read the steps and not just do a character count? Personally I wouldn't subject the information on my phone to a that of a file that someone put on a download site.
- Get update file
- Place on SD Card
- Boot phone in flash mode and begin
Odin not required
Absolutely, sure it's full of other info, but it's info that's been asked numerous times.
Click to expand...
Click to collapse
Fair enough about not wanting to DL something that you can't verify the source... On a positive note, those three steps are exceptionally concise!

Does this work on DK28 Froyo? Probably not, eh?

I am on all stock and have clockwork installed. I tried to do the update like you said here, but it aborts the install and says no error message. I downloaded from the link you provided. It says E:Error in /sdcard/update.zip
Firmware version-2.1-update1
Build Number-SPH-D700 ECLAIR.DI18
So is there something I am doing wrong?

mynewepic10 said:
I am on all stock and have clockwork installed. I tried to do the update like you said here, but it aborts the install and says no error message. I downloaded from the link you provided. It says E:Error in /sdcard/update.zip
Firmware version-2.1-update1
Build Number-SPH-D700 ECLAIR.DI18
So is there something I am doing wrong?
Click to expand...
Click to collapse
This has been answered in one of those posts with several hundred replies (if I had the answer on-hand, I would post it). I kept the Epic stock to avoid any issues, so my update was rather simple. A few people have already had to reload their phones a couple of times before everything worked out.
nonzenze said:
Does this work on DK28 Froyo? Probably not, eh?
Click to expand...
Click to collapse
DK28 wasn't official. The latest official release is DI18 - 2.1.1. This updates STOCK 2.1.1 ONLY.
I didn't care to fool with the phone originally due to not knowing the exact release date of froyo. It has been way over due, but I honestly didn't have any reason to mod. Froyo has enhanced the phone, but honestly doesn't provide anything new that would change the way I already use the device. GPS is faster to acquire in google maps, but in GPS Test, it was always fairly instant. It's also reports more accurate, reports being key, it wasn't ever off but by 20 feet anyway, which is about all you can expect on 3D accuracy.

I used the .exe file from Samsung website to flash my phone and works like a champ.
Now some minor quirks with Froyo but will address them in different threads.
Thanks for the help!!
Dakrk

Updated the post, you can download the file directly to the phone. Send yourself the link via gmail....and read the first post of this thread.....

This update worked flawlessly didn't lose any of my settings or anything, Thank you so much!

D623 said:
This update worked flawlessly didn't lose any of my settings or anything, Thank you so much!
Click to expand...
Click to collapse
Glad to hear it

Doesn't work on DK28

Thank you for the clear instructions
I appreciated all the details in your instructions.
I downloaded to a blank xtra SD as you did and it all went very smoothly the first time.
Data, everything is retained.
Thank YOU.

up it goes

Thank you,i got bored waiting for ota.
Sent from Maxwell's shoe.

[Q] need help on the elocity a7

Everyone mod is working i geuss except for mines i don't know what am doing wrong.
i tried to mod mine with the dexter mod 1.41 and mines wont work,
1st- i download the file didn't unzip it then i sent it to the SD card and rename it "update.zip".
2nd- i did the factory wipe/reset then i select to wipe all data
3rd- i select update.zip but i notice an message saying( E. can't read from SD card, or something like that). i dont know if that is apart of the mod or what.
4th- when it is finish then i select reboot option and when it is done rebooting i get nothing new. can you help me out are do you know something that i might be doing wrong. i also did do the 1.42 patch aswell didn't work. are is there any other newer way to do it are what. Even if you can write step by step on how to do it properly.
PLEASE HELP ME OUT.

Did your a7 have a sdcard problem before the attempt ?
And even tho it sed it can't read sdcard, did it proceed to install anyway ?

yes it did go ahead with the installation, but it is during the installation process where i saw something about can't read error, i jus got it yesterday then i did the new update from elocity website. then i tried al,ost all of dexter's mod

these are the exat message i got was (E:can't open/usb/update.zip)
(E:Can't mount USB:update.zip)
then underneath that it say (Finding update package)
then it say (Wait for 5 second)
(Installation time out)
(installation aborted)
(Formatting MISC)
these are all the thing it say during installation

Does your a7 read, mount and unmount the sdcard stock?
What is the path to the update.zip?
Sorry for all the questions, I'm just trying to get on the same page
Sent from my Mynized EVo 4G

I'm having just about the same problem. Will be interested to hear any helpful suggestions. At this point, the only thing that is working is to do the factory reset and use the basic version again. I keep getting a message that "update.zip" (although I named it "Update.zip") is a bad file. I also did not get "apply sdcard:update.zip" as a menu option, only "apply:update.zip", which when clicked did read the sd card, then gave the bad file message.

update
Lemme clarify first then update. I bought the A7 in February and loaded the most current Dexter mod at that time. It's been running beautifully until this week. Over a period of days, the A7 started acting up until it was no longer usable at all. First, the BlueTooth cut out, then the WiFi, then it just got stuck and was repeatedly lighting up the Elocity logo, but never fully booting up.
Elocity support said to do the Factory reset, which I did and it was back to baseline again. Trying to install the latest version of Dexter is where my problem started. (end of history)
So, now the update for this evening: I tried every version of Dexter's mods and got the "bad" file message each time, even after downloading them again to be sure I wasn't using a corrupted copy. However, my A7 will wipe, then update with Elocity Firmware 2.0134 and read it just fine on the exact same SD card when renamed "Update.zip".
So, now I have a very frustrated boy with autism who can't do his Google Voice search anymore and the Android Marketplace doesn't let me download the apps I already bought for him. We're back to where we were when it arrived out of the box in February, but unable to restore what we had.
I have to think there's a conflict between Dexter's Mods and the new firmware, even after one wipes everything. I even tweeted Dexter (and I don't *do* Twitter!) to see if he could respond for help and am waiting for a response.
Can someone please help? Thanks!!

Sounds like your having issues with the files you download, I have gotten in the habit of not renaming the update file to just that until its on the usb card. Seen to many messages like yours if I saved one update over a prior with the same name. Try download 1.41 and 1.42 leave their names the way they are and save them to folder on your computer. Copy them bother to sd-card leaving names the same still. once both are there rename 1.41 to Update. Remove card from pc put in tablet. Use the recovery system method (press then hold power button method) do wipe, clear cache, the use update option. If this is successful which it should be delete the 1.41 file on card that you renamed to Update, this can be done on tablet or computer. Once that file is gone rename the 1.42 to Update and once again flash from recovery system.
Hope that solves your issue
Make it a habit to not save an update over top of another, though it seems like it would keep you from having to rename but for me it always seemed to corrupt the file.

thanks! I'll give that a try. I notice you said "PC", but I have a Mac ... could that be part of the issue ... downloading to Mac, then moving the file to SD or USB? (could be a stupid question, but if I don't ask, that makes me even more ignorant)

cwolfpack3 said:
thanks! I'll give that a try. I notice you said "PC", but I have a Mac ... could that be part of the issue ... downloading to Mac, then moving the file to SD or USB? (could be a stupid question, but if I don't ask, that makes me even more ignorant)
Click to expand...
Click to collapse
Do you end up with a folder or a zip file? Safari has a bad habit of extracting zips when it downloads them. Search my posts, there is a long ranting one that covers issues with both PC and Mac.

they're zipped ... I use Firefox 4.0, when the option comes up at download, I always click "save", not "open". Thanks, though.

well, problem solved. I ran Bestial's gapps patch over top of the new eLocity firmware and i have full functionality again. very happy mom here! now to reload all those apps for my boy! =D

Wow, I'm glad you found a solution...I have been following the thread and was getting worried.

I had the same problem after downloading the newest elocity update and then trying dexter's mod. I found out my problem is that I renamed the file "update.zip". If you just rename the file to" update" then it loaded fine. Not totally sure why this worked and maybe it was just my case, but maybe it will help some of you out!

bft305 said:
I had the same problem after downloading the newest elocity update and then trying dexter's mod. I found out my problem is that I renamed the file "update.zip". If you just rename the file to" update" then it loaded fine. Not totally sure why this worked and maybe it was just my case, but maybe it will help some of you out!
Click to expand...
Click to collapse
No. Your problem was that you were using a windows machine and your file extensions were hidden (I am psychic, but don't worry, I won't tell anyone your pin number). She is using a Mac, no hidden file extensions.

How do you get to the gapps patch? I'm really having trouble getting any updates on my a7. seems like its not taking anything off the sdcard. i brought a new card and I'm still having the same issue.

sbradby said:
How do you get to the gapps patch? I'm really having trouble getting any updates on my a7. seems like its not taking anything off the sdcard. i brought a new card and I'm still having the same issue.
Click to expand...
Click to collapse
bestialbub's patch for google apps (to use the market) can be found at http://forum.xda-developers.com/showthread.php?t=1019846 with the instructions
It's still working very well for us ... several weeks later.
Good luck!