[SOLVED] TG01 US ROM Update? (Error occurred during system reset) - TG01 ROM Development

Hi everyone, if you are having trouble with upgrading the ROM on the US TG01, then this is your topic! Here are the few things you must do the update the ROM:
-Fully charge your battery
-Format your MicroSD card to FAT32, then create a folder called "prg" (don't type the speech marks), and place your ROM in there, and don't forget to change it's extension to .enc from .tsw
-Remove the black tab under the SIM slot, beware, pull it upward, not forward
-Can you see the three "yellow circles" on the SIM slot? The first and third one are what we wanted the connet together. Link/connect them with a wire
-Push the power button for 10 seconds
-Wait a little bit
Done!
Don't thank me, thank leeston for all his continous support, hey, thank you again man!

El Diablo said:
Hi everyone, I've just tried with the mirolg's Sense included English ROM to upgrade the software version on my TG01, but it's just restarting, so nothing changes, any ideas?
Click to expand...
Click to collapse
Not enough detail for me to help you. Please reply to the following.
1. Which method did you use, short pin or sddl+?
2."just restarting", do you mean that the sd downloader doesn't start and goes straight to Toshiba screen or it starts then resets the device making no changes?
3.If the sd downloader starts, does it say 'Variant Invalid' briefly before it restarts?
If you dont know what shortpin or sddl+ means then look HERE.

Sorry, I did not informed you very well,
I've used the sddl+ method. Clicking on the sddl+ restarts the device, just like a soft reset. If I click on the SD downloader, then it says "Invalid filename".
Thanks for the reply.

Now the SD Downloader says "Error occurred during system reset" when I click Download.
Err?

I'm wondering, is that too difficult to help a mate who is having a problem? PLEASE???

El Diablo said:
I'm wondering, is that too difficult to help a mate who is having a problem? PLEASE???
Click to expand...
Click to collapse
I assume you've read the sticky about rom flashing and are still having problems, follow the guide below and let me know how it went.
Download my ROM from HERE.
Download 7Zip from HERE.
Download sddl+ from HERE.
1.Install 7Zip
2.Right click "TG01WP_StonromR7.7z" and choose "7Zip -> Extract to "TG01WP_StonromR7.7z\"" (This will create a folder called "TG01WP_StonromR7" in the same place as the downloaded file)
3.UnRAR sddl+
4.On your storage card create a folder named "prg" (no speech marks)
5.Copy "TG01WP_Stonrom.tsw" to the "prg" folder on your storage card.
6.Copy sddl+ to the root of your storage card. (root = not in a folder, just straight on the card)
7.Open file explorer and go to your storage card and open sddl+
8.You will now have a white screen, with the text "sd downloader - do not remove battery or storage card" (it may not say exactly this, i can't remember just now)
9.Wait
10.Wait a bit more
11. The phone should restart after a bit of waiting, the first boot can take a long time. Be patient.
I only say use my rom because i know it flashes and boots on my 2 devices.
If this doesn't work, pay attention to the on screen messages during flashing and post them here word for word, along with which rom you tried and any other info that you can provide.

Thanks again for your help, downloading right now, I'll inform you about the process.

It doesn't work, only says "Invalid filename" if I click on the TG01_SDDL.
If I click on the tg01_sddl+, the device just restarts, no further changes, still the same problem.
???
BTW, I changed the ROM's name to TG01WP_00.tsw, now the SD Downloader says "Error occurred during system reset".

El Diablo said:
It doesn't work, only says "Invalid filename" if I click on the TG01_SDDL.
If I click on the tg01_sddl+, the device just restarts, no further changes, still the same problem.
???
BTW, I changed the ROM's name to TG01WP_00.tsw, now the SD Downloader says "Error occurred during system reset".
Click to expand...
Click to collapse
Only thing i can think of is to rename the .tsw to .enc.

I tried that too. It doesn't work neither.
BUT,
Thank you very, very much for your afford.

Post edited, detailed informations added.

Have you tried updating you TG with the manufacturer update instead of a cooked ROM? Just to prove that flashing is possible on your device.
I would suggest using the official update and SD Downloader from Toshiba.
Please post back with your experiences.

Yes, actually I've tried with the TG01WP-WM6.5-UK file. Result: Same

El Diablo said:
Yes, actually I've tried with the TG01WP-WM6.5-UK file. Result: Same
Click to expand...
Click to collapse
Where did you get the file? The correct file name should be "TG01WP_5005000176.tsw" or "TG01WP_5005000167.tsw" not "TG01WP-WM6.5-UK"
Just to clarify, is it an Orange UK TG01? Did you buy it from a shop or second hand?

I got the file from Toshiba's official web site (Europe).
Err, I don't know where my device is from, but I can assume you it's a TG01, not the "A" one.
Here, the file is included on the file I've downloaded:
TG01WP_5005000176.enc

Ok, the phone is from USA, I guess it has a different software version updater.

El Diablo said:
Ok, the phone is from USA, I guess it has a different software version updater.
Click to expand...
Click to collapse
The only thing i can see that is left now is to use the short pin method. Details are in the guide to flashing tut in the sickies. You will need to make sure the radio versions are the same first though.
Start\settings\system\about\version info. Where it says radio version is what you need to know. Mine is "5005.1600.05" so would be referred to as 1600 here. If you let me know what radio you have i will upload a ROM with the correct radio for you.
This may take me a little while though.

Radio version is 5001.0000.5319
Very different, heh?

El Diablo said:
Radio version is 5001.0000.5319
Very different, heh?
Click to expand...
Click to collapse
I'll try and find a rom with that radio, for now though try renaming the tsw to .enc and try short pin.
I think some phones released to America have different radio hardware than UK phones. I'm not sure if this is the case for the TG01 though. I think we have a few American forum users. Maybe they could help if they are reading this?

Anyway, I really appreciate your help and support.

Related

WHY ME??

First of all, I'd like to say this is the most positive and progressive forum I've ever joined on the internet so far. You guys not only rock, but also inspire, for which I would like to add to the THANK YOU chorus!
I have spent days and sleepless nights browsing this forum, trying to unlock my T-mobile MDA.
The details are:
-T-Mobile (USA)
-ROM Version: 3.14.40 ENG
-ROM Date: 11/26/02
-Radio Version: 6.18
-Protocol version: 324e4
-Model No.: PW10B1
-IMEI: 35031400086966009
I'm using the USB via the cradle. The XDA unlock gives me an error reading, which is not uncommon elsewhere in this forum. I had to download the SER v 1.2.
Upon download and installation, I copied (via OSImage Tool)as per instuctions and ran programme A, only to get the "error message 007 ....No ROM image file".
At this point I'm pretty exhausted, especially when I see other posts of people who successfully unlocked theirs. I give up on foguring it out myself, so I please need help. Apparently, I'm a total rookie in this field . It would be highly appreciated if someone can be kind enough to please give me a step-by-step guide on the entire process either by replying to this post in this forum or by anyother means to contact me (e-mail, IM, etc) through my profile. I'll have a great sense of achievement and happiness gaining my freedom by eventually unlocking my device this weekend before my trip next week.
Thank You and I appologise to anyone that might be offended by the length of this post :wink:
You can run the file from your desktop, make sure you are synced with the xda, it will update the rom through the usb port. Before you do this it would be a good idea to back up your current rom using the sd bootloader method. Once the special edition rom has completed, just poke the unscrewed top half of the stylus in the hole on the bottom right of your xda, just poke once, wait one minute then poke again. You should tehn have an unlocked xda, you can then restore your original rom by inserting the sd card with your original rom, entering bootloader and pushing the action key when prompted.
Thanks for the response. OK, first, what ecxactly is the bootloader and the "bootloader method'?
Secondly, I tried running the S E ROM and keep getting the error message relating to its inability to find the ROM image.
Where did you download from, what size is the file? The bootloader method is accesssed by pushing the reset with the stylus while holding down the power button, then press the top left key on front of xda, you will see options there, you will not see these options when you restore a ron from sd, all you need do is enter bootloader, the xda will ask if you wish to program the rom, you press the centre of the 4 way jog button and away it go's.
I downloaded from:
http://cuba.calyx.nl/~jsummers/XDA/XDA-developers-SER-v12.exe
It seems to be a 15.4MB file
The file size is correct, you should be able to sync your xda, click on the special edition rom .exe file and it should install to your xda using program a, there is need to use any other tools, as\long as you have a backup of\current rom you have a way back to your original configuration.
I have just downloaded and executed that same file, the first thing that comes up is winzip self extractor, once it has unzipped itself a dos box pops up, it then jumps to program a and commences the install, make sure you are running the file direct from the directory and not from a shortcut, it definitely works.
I did that and I keep getting that bewildering error code 7. Again, I tried unzipping the file first and then run prog A. It went fine until after step #3 then error code 12 pops up: "ROM image is not compatible with my device.............. download utility nd try again...."
This thing seems simple and works for everybody else but me :evil:
at this point, you should use winzip or winrar to extract a file named nk.nbf frim the exe you downloade. then to either use the XDAtools to copy it directly to your XDA ROM, or move the file to SD card using your xda then use the SD flashing method from the bootloader.
good luck ...
Good news & Bad news ...... I was able to run the SER prog. First, I ran the adaptrom file and then programme A. Everything was proceeding fine until it was about 50% and then my system (desktop) froze/crashed. I had no choice but to restart the system. Now the XDA screen has a display with a progress bar and the message: "Upgrading........ It will take about 5 mins.........."
It seems its a curse :twisted: but since I've made some progress, I cant give up now. So I'm determined to succeed by fixing this stuff. My question is Can someone please tell me where to go from here??????? As usual, your patient and kind response is highly appreciated.
Oh, I forgot to add that in addition, now ActiveSinc cannot establish communication with my device, even after restarting it several times and trying to get connected via its program
hey ... no big problem ... relax!
you have to get SD reader/writer and connect it to your PC. move the extracted nk.nbf file to the SD card then insert it into the XDA. goto the bootloader mode (power + soft reset) it should recognize the card content ... just press the middle of the rocker key (action) and you will see hex counter increasing from 000 to 200 ,.. at the end, press hard reset and after 60 sec press hard reset again.
note: make sure your XDA is > 80% charged before start!!
good luck.
Didnt Work
Did exactly as you suggested, but ending up with the same screen "uploading..... It will take about 5 minutes..." :?
Finally made it!!! Thanks guys for all your input. Device works fine, so far, I dont seem to have lost anything! I feel FREE, excited and victorious!!!! YEAHHH!!!!!

[TUT] How to Unbrand / Debrand your HTC HD2 with PSAS Goldcard [2010-11-29]

Tired of waiting until your service provider releases HTC updates for your branded phone?
Here comes your step by step guide on how to unbrand or debrand your HTC HD2/Leo using a PSAS Goldcard.
(Thanks go to svc und oliverweidel)
Introduction:
What does a Goldcard do? Mark's post answers this best:
"All a GoldCard will do is bypass the carrier ID check when you attempt to flash a stock rom via the microsd card that you wrote the GoldCard to. A GoldCard [as such] won't unbrand your phone, that is only acomplished by flashing an HTC Stock Rom [with your Goldcard]. If you flash a carrier's Stock Rom [with your Goldcard] then it will still be branded with whatever that carrier added to it. That means that you have to use that same card everytime you want to flash a stock rom and you have to use the same method to flash it (via the same microsd card). It wont sim unlock your phone and it wont let you flash any other roms apart from stock roms".
Note:
If you experience problems:
- Check first whether you have correctly followed each step carefully
- Read the Troubleshoot Section below
- Search the thread for a similar problem
- Post a question (Please do not send me a PM with support requests but post them. Thank you!)
A. Prerequisites:
A.1. Micro SD card (no SDHC [HighCapacity], it needs to be <4GB)
A.2. The "PSAS" Software
A.3. PC with ActiveSync or MobileDeviceCenter Connection to your HD2 (Guest is good enough)
B. Make your SD Card a Gold Card:
B.1. Back up your system (especially your SD-Card!! for a Goldcard you have to format your SD-Card)
B.2. Format your Micro SD card with FAT32
B.3. Insert your formatted SD Card into your HD2
B.4. Connect your device to your PC (ActiveSync/MobileDeviceCenter)
B.O.1. Option 1: PSAS Full Version:
..O.1.1. Buy your PSAS Full Version (30€). http://psas.revskills.de/?q=payment
..O.1.2. Following the link in the registration confirmation e-mail, download, install and activate PSAS
..O.1.3. Start PSAS (needs administrator rights)
..O.1.4. Goto "Calculators/Generators" - "Generate HTC Goldcard"
..O.1.5. Select Device Key “LEO”
..O.1.6. Click on "Get SD Card Serial from WINCE Device"
..O.1.7. Choose the right SD Card (note the Size under SD Card Info)
..O.1.8. Click on "Save Goldcard Image to WINSCE SD" (Alternatively, you can save the Goldcard image to file and write the image later - see Option 2.7)
..O.1.9. Now your Goldcard is ready
B.O.2. Option 2: PSAS free Version:
..O.2.1. Download an install the PSAS Free Version: http://revskills.de/downloads/revskills.zip
..O.2.2. Start PSAS (needs administrator rights)
..O.2.3. Goto "Hardware Forensics" - "WINCE SD Card Utils"
..O.2.4. Click on "Get Serial and Disk ID".
..O.2.5. Choose the right SD Card (note the size)
..O.2.6. Copy the displayed CID (i.E. 9E000000400000000000020002000000)
..O.2.7. Send the CID to a friend owning the full version to prepare your image
..O.2.8. If you don’t know one, send a PM to either "lyriquidperfection", "oliverweidel", "mskip", "sirsmiles" or me ("pcwe")
..O.2.9. Once you have your image, click on “Write Image File”
..O.2.10. Select the image you received (Goldcard.img)
..O.2.11. Now your Goldcard is ready
**********************************
Links to images for frequently used CIDs:
GoldCard_9B000000400000000000020002000000.img
GoldCard_9D000000400000000000020002000000.img
GoldCard_9E000000400000000000020002000000.img
**********************************
C. Flash HTC Stock ROM:
C.1. Download your HTC 3.14 Stock ROM
C.2. Extract your Stock ROM (RUU_Leo_S_HTC_XXX_3.14.XXX_Radio_15.42.50.11U_2.1 5 .50.14_LEO_S_Ship.exe)
C.3. Copy RUU_signed.nbh to your Goldcard and rename it to LEOIMG.nbh (Use the “Explore” Feature of ActiveSync / MobileDeviceCenter)
C.4. Switch Off your device (or remove the battery)
C.5. Press VOL Down and Switch Device on to enter Bootloader
C.6. Bootloader loads your Goldcard (grey screen) and flashes every part of your HD2 (Bootloader, Radio, OS…) Takes up to 10 mins.
C.7. When finished, Reboot your device (remove/insert battery or press red button)
C.8. Congratulations, now your HD2 is unbranded!!
D. Install favored ROM (Artemis!):
D.1. Download your favored ROM
D.2. Connect your device to your PC (ActiveSync/MobileDeviceCenter)
D.3. Run SSPL_RUU.exe with Artemis v40 RUU_Signed_0xxx.nbh in the same folder and follow the instructions
D.4. Hard reset (Press VolUp+VolDown and still holding both press PowerOn and follow the instructions)
D.5. Boot to homescreen
D.6. When on homescreen –> Softreset
D.7. For more information, read the first page of the Artemis Forum
*** Troubleshooting ***
In case you experience a problem check these points:
1. Is your card a no SDHC Card? -> SDHCCards (all cards 4GB or bigger) often cause problems, especially many of the no- or low-brand cards.
Then, follow these steps again:
2.1. Format your card again, using a Windows PC instead of the HD2's card utility.
2.2 File System must be FAT32 and allocation unit size 4096 Bytes
2.2. Make sure your card has no name (no Volume Label).
2.3. Double check your drive ID. You need the CID of drive ID 07.
2.3. Double check your CID.
3.1. Download your HTC Stock ROM a second time.
3.2. Extract RUU_signed.nbh from the newly downloaded Stock ROM again.
3.3. Rename RUU_signed.nbh to LEOIMG.NBH.
3.4. Copy LEOIMG.NBH to your newly formatted and try again.
4. It didn't help? Post a support request on this thread with a detailed description of your problem and when it occurs.
Note: Do not send me a PM with support requests but post your problem here. More persons can help you and others benefit from it as well. Thank you!
Nice job pcwe! Hope this will help many LEO owners to flash the great Artemis v.40 by Sir sternas...
So, HSPL actually will not be neccessary to flash 3.14 Stock roms (SPL 3.03...)
oliverweidel said:
Nice job pcwe! Hope this will help many LEO owners to flash the great Artemis v.40 by Sir sternas...
So, HSPL actually wont be neccessary to flash 3.14 Stock roms (SPL 3.03...)
Click to expand...
Click to collapse
No, HSPL does not go well together with Stock Rom 3.14/Artemis40.
But using Goldcard, you don't need to remove HSPL before starting. It removes everything on the device.
Howdy,
very nice thread!
One question:
HSPL will be overwritten through this procedure - thats clear as eggs in eggs - but will the stock rom from sd card start to flash without hspl?
Maybe stupid, but I thought, I read something about this somewhere...
Regards
Shinson
Thanks pcwe. The goldcard image you sent worked perfectly. I was able to install the stock 3.14 ROM on my Telstra HD2, and then Artemis v 40.0 ROM
Shinson said:
Howdy,
very nice thread!
One question:
HSPL will be overwritten through this procedure - thats clear as eggs in eggs - but will the stock rom from sd card start to flash without hspl?
Maybe stupid, but I thought, I read something about this somewhere...
Regards
Shinson
Click to expand...
Click to collapse
with this Goldcard you can flash every rom on your HD2 you dont need anything on hd2. If HTC Build the HD2 the first flashwas with debug same as Goldcard.
tvailment said:
Thanks pcwe. The goldcard image you sent worked perfectly. I was able to install the stock 3.14 ROM on my Telstra HD2, and then Artemis v 40.0 ROM
Click to expand...
Click to collapse
I'm glad it worked. Thanks for the feedback.
Shinson said:
Howdy,
very nice thread!
One question:
HSPL will be overwritten through this procedure - thats clear as eggs in eggs - but will the stock rom from sd card start to flash without hspl?
Maybe stupid, but I thought, I read something about this somewhere...
Regards
Shinson
Click to expand...
Click to collapse
A gold card comes with its own boot environment. Its only kicked on by your bootloader (whatever version) and flashes all: Your current bootloader, radio, OS etc. Aftewards you have an unbranded HTC device like one bought in shop.
I, yesterday, tried the "gold card-method", following step by step the tutorial.
But, unfortunately, flashing process stopped at "Os" level.
I went back to artemis V37, but i'll try again, perhaps sdcard issue ?
Thank you for your tutorial, pcwe.
valeloflo said:
I, yesterday, tried the "gold card-method", following step by step the tutorial.
But, unfortunately, flashing process stopped at "Os" level.
I went back to artemis V37, but i'll try again, perhaps sdcard issue ?
Thank you for your tutorial, pcwe.
Click to expand...
Click to collapse
Try formatting your card on Windows PC (it must be FAT32). Then insert it into the device, but do not format it again. Then follow the steps to get to your CID and send a PM for another Goldcard image.
Sorry but I'm just a bit confused why you created a thread with the heading as [TUT] which has no tutorial apart from a link to the artemis roms thread which then links to another thread that gives instructions on flashing via a goldcard (which has already been written a longg time ago). I commend oliverweidel on offering to make goldcards for members as I have made about 20 in the last 2 days and it does get a bit tedious lol.
Maybe you could just explain to me why this thread is labeled as a tutorial when it has no tutorial when its really just a link to a tutorial.. Sorry im not trying to be mean or flame this thread I'm just a bit lost as to what its propose is lol
Ohh and I'm on my phone right now using xda app so if something didn't display and I actually missed the proper tutorial then i humbly apologize for this post lol.
Mark.
Sent from my HD2 using XDA App
mskip said:
Sorry but I'm just a bit confused why you created a thread with the heading as [TUT] which has no tutorial apart from a link to the artemis roms thread which then links to another thread that gives instructions on flashing via a goldcard (which has already been written a longg time ago). I commend oliverweidel on offering to make goldcards for members as I have made about 20 in the last 2 days and it does get a bit tedious lol.
Maybe you could just explain to me why this thread is labeled as a tutorial when it has no tutorial when its really just a link to a tutorial.. Sorry im not trying to be mean or flame this thread I'm just a bit lost as to what its propose is lol
Ohh and I'm on my phone right now using xda app so if something didn't display and I actually missed the proper tutorial then i humbly apologize for this post lol.
Mark.
Sent from my HD2 using XDA App
Click to expand...
Click to collapse
Thanks for your input. I'm glad you mentioned that you're working on your phone. Maybe I misunderstand what a tutorial is. When you watch it on a PC, though, you see a tutorial that includes 4 sections with a total of 43 steps (including 2 options). I only link to the PSAS page and to the Artemis' frontpage. So IMHO this is a tutorial. Since you are a very experienced XDA moderator, I hope you get to see the full thread and let me know what you think about it. I'm looking forward to receiving your feedback.
(And yes, I made 15 Goldcards over the weekend, so I'm happy we can share the load )
When I turn the phone off after following all the steps and hold volume down and press power button the bootloader screen laods but it doesnt load the LEOIMG.nbh.
At the bottom it just says 'Serial'.
What am I doing wrong? I have followed all the instructions.
Although maybe I didnt get the correct Goldcard image? I went to the psas website and clicked on 'Free Goldcard gererator'
You then enter your email and sdcard id and you get emailed a goldcard image. Does this one not work?
I also got the phone to format the sd card as it does format it to FAT32
pcwe said:
Thanks for your input. I'm glad you mentioned that you're working on your phone. Maybe I misunderstand what a tutorial is. When you watch it on a PC, though, you see a tutorial that includes 4 sections with a total of 43 steps (including 2 options). I only link to the PSAS page and to the Artemis' frontpage. So IMHO this is a tutorial. Since you are a very experienced XDA moderator, I hope you get to see the full thread and let me know what you think about it. I'm looking forward to receiving your feedback.
(And yes, I made 15 Goldcards over the weekend, so I'm happy we can share the load )
Click to expand...
Click to collapse
Ok I have to apologise as I just viewed this thread on my pc and it shows the whole of your first post including all the steps and yes I would regard it as a Tutorial
For some reason when viewed on the xda app it shows absolutely none of your tutorial apart from:
A. Prerequisites:
1. Micro SD card (non HCSD that is
Softreset
7. For more information, read the first page of the Artemis Forum:
http://forum.xda-developers.com/showthread.php?t=612580
Click to expand...
Click to collapse
Maybe its all the quotes in your post but you can understand why I was confused when I first saw it lol
I may have to contact the creator of psas as ALOT of people are now asking for GoldCards and at the moment they can only be created with a paid for version of the program so if he has objections about using it to make goldcards for anyone who asks then it may have to stop. I originally asked him about 6 months ago for permission to make goldcards for members who had mistakenly flashed a stock rom via sd card whose spl wasnt covered by HardSPL (to get them out of a hole and allow them to flash a rom with a lower SPL). Looks like people are now wanting goldcards purely to change stock roms for which they should really be using a paid for version of psas.
I will try to get hold of him over the next few days and ask if he has objections to making goldcards for users who havent already buggered their phones up then I will let you know.
Keep up the good work
Mark.
neonplanet40 said:
When I turn the phone off after following all the steps and hold volume down and press power button the bootloader screen laods but it doesnt load the LEOIMG.nbh.
At the bottom it just says 'Serial'.
What am I doing wrong? I have followed all the instructions.
Although maybe I didnt get the correct Goldcard image? I went to the psas website and clicked on 'Free Goldcard gererator'
You then enter your email and sdcard id and you get emailed a goldcard image. Does this one not work?
I also got the phone to format the sd card as it does format it to FAT32
Click to expand...
Click to collapse
That doesn't work, its for Android only (see the title of the page). You have to follow the instructions on the first page of this thread. You either need to by PSAS (Option1) or ask somebody that has it (Option2) to generate one for you.
mskip said:
Ok I have to apologise as I just viewed this thread on my pc and it shows the whole of your first post including all the steps and yes I would regard it as a Tutorial
...
I may have to contact the creator of psas as ALOT of people are now asking for GoldCards and at the moment they can only be created with a paid for version of the program so if he has objections about using it to make goldcards for anyone who asks then it may have to stop. I originally asked him about 6 months ago for permission to make goldcards for members who had mistakenly flashed a stock rom via sd card whose spl wasnt covered by HardSPL (to get them out of a hole and allow them to flash a rom with a lower SPL). Looks like people are now wanting goldcards purely to change stock roms for which they should really be using a paid for version of psas.
I will try to get hold of him over the next few days and ask if he has objections to making goldcards for users who havent already buggered their phones up then I will let you know.
Keep up the good work
Mark.
Click to expand...
Click to collapse
Thanks for your feedback and for checking with bkerler (last week, he was in vacation). I'm very much interested in his/your feedback.
pcwe said:
Thanks for your feedback and for checking with bkerler (last week, he was in vacation). I'm very much interested in his/your feedback.
Click to expand...
Click to collapse
Maybe its his business model...
Thank you
Thank you very much for the goldcard pcwe, it worked perfectly.
I already installed Artemis V.41 on my phone without problems.
Thanks again.
Guys, last night I got flooded with requests for Goldcards. I case your request is still unanswered, PM me again.
Feedback appreciated
Did your Goldcard work? Drop a line here. Thanks.

Cant boot anymore

Hi folks, i'm looking for 2 days a way to solve my DHD problem:
It can't boot anymore. It pop up the "htc quietly brilliant" screen, play the boot sound and, start this step again, and again, and again...
So I'm googling a LOT about how to solve this, if exist a way to restore the original rom. Because i'm thinking that was the problem, my original rom is gone.
That happens when i try to install 3 softwares from appbrain, my device got freeze and i hit the power button to reset. So, after that, my device is gone.
So i came here, to ask you folks: There is a way to recover the original rom ? Without send to warranty (because it spend something like 1 month here).
I'm not a mobile hacker or something, i'm just trying to be happy with my device.
Thanks a lot and sorry for my poor english!!
Perhaps try booting to the bootloader, by holding Power + Volume down button. From there, you should be able to do a factory reset, which may or may not fix your problem. Worth a shot at least, imo
And if it does not work when you do a factory reset, you can use a rom.zip from HTC RUU to restore your phone.
Now the important thing is to know which HTC rom you are running. If it is unbranded, 1.72.405.3 is a sure shot. Download the RUU.exe from Stock roms thread in android development subforum, and run it. When the window pops up, open run prompt, and type: "%TEMP%". Then search for rom.zip, copy it to your desktop, rename it to PD98IMG.zip and put it to your SD card (I hope that you have a card reader). Then just reboot to bootloader as tmh described, and watch the magic happen
Then if your phone is branded, you can still use the same technique to make PD98IMG.zip, but you have to get the RUU that matches your branding. There are lots of RUUs in android development subforum, just search.
Hi guys,
thanks a lot for quik reply!
I perform the procedure indicated by tmh, but without lucky ;\
I think it is unbranded. I buy it at Portugal and i'm using at Brazil right now.
I'll perform your tip jkoljo.
I'll post a repply to let people know if it works or not.
Thanks a lot!!
Hope the advice the last guy gave helps , a factory re set may work fine and fix the issue. Iv had 3 dhd since the day of release , the second one I had wouldn't switch on, had it replaced by Vodafone . Not sure weather or not they will give you a new one . Hope u get it fixed
Sent from my Desire HD using XDA App
I'm not sure if i got cover from warranty.
Right now, my "PROOF OF PURCHASE" is at europe, and i'm at america, so i must get this work again by myself, or pay (some expensive value, i think) for htc support.
I found those ROM version:
RUU_Ace_HTC_WWE_1.72.405.3_R2_Radio_12.28e.60.140f_26.04.02.17_M2_SF_release_163262_signed.exe 04-Jan-2011 12:41 285M Windows executable file
RUU_Ace_HTC_WWE_1.72.405.3_R_Radio_12.28e.60.140f_26.04.02.17_M2_release_161342_signed.exe
but i'm not sure about "WWE". What it means?
dogasantos said:
I'm not sure if i got cover from warranty.
Right now, my "PROOF OF PURCHASE" is at europe, and i'm at america, so i must get this work again by myself, or pay (some expensive value, i think) for htc support.
I found those ROM version:
RUU_Ace_HTC_WWE_1.72.405.3_R2_Radio_12.28e.60.140f_26.04.02.17_M2_SF_release_163262_signed.exe 04-Jan-2011 12:41 285M Windows executable file
RUU_Ace_HTC_WWE_1.72.405.3_R_Radio_12.28e.60.140f_26.04.02.17_M2_release_161342_signed.exe
but i'm not sure about "WWE". What it means?
Click to expand...
Click to collapse
the different is just the radio version. just try flash one of them and see if that work.
WWE means World Wide English, which is an international release
Any one of those RUUs you linked is ok, as hedayat7 already said.
WWE is World wide English...so both are english Roms...try the RUU flash, it should work like a dream....
jkoljo said:
Download the RUU.exe from Stock roms thread in android development subforum, and run it.
Click to expand...
Click to collapse
Sorry ask for your help again, but at Official thread (thread number 841207) for DHD files, both 1.72.405.3 links are broken.
So i search for another thread, and found another one, but when i run the .exe, it ask for a USB connection to device, so it appears wrong.
Could you gimme a hand to find the correct file?
PS: I can help with a web hosting to all correct files.
You probably found the correct RUU, now proceed to %TEMP% and copy rom.zip to desktop.
You can find RUUs here: http://xdafil.es/index.php?path=DesireHD/RUU/
I am not completely sure if those zip files are actual rom.zips, you can check that. Open up the zip, and if it has a long list of hboot, system, android-info.txt etc, then it is rom.zip and you can just go ahead and rename it to PD98IMG.zip.
jkoljo said:
You probably found the correct RUU, now proceed to %TEMP% and copy rom.zip to desktop.
You can find RUUs here: ...
I am not completely sure if those zip files are actual rom.zips, you can check that. Open up the zip, and if it has a long list of hboot, system, android-info.txt etc, then it is rom.zip and you can just go ahead and rename it to PD98IMG.zip.
Click to expand...
Click to collapse
But i did that.
The "1.72.405.3" files at this URL are broken (Or need password to access it, because "You don't have permission to access" message pop up).
When i run the RRU i got two screens, first i must accept a advice, the second one ask if I have a USB connection to my device. Even when i proceed to next step, i got no .zip file on my %TEMP%.
Im lost because of that lol
UPDATE: OK I FOUND IT! haha ty
Thanks a lot my friends,
but it doesn't work.
I perform the process for 2 different roms, and it doesn't work.
Still can't boot.
I'll sent for warranty and wait a loooong time..
But thanks a lot for help me with this!!
Ok, then there is something wrong in the device itself. You have to send it to a service center.
Sent from my Desire HD using Tapatalk
Hi again,
i keep a little hope that i can restore my phone, so i found a possible solution:
OTA update.
At "showthread.php?t=667728&page=2", i found a guy with the same problem i think, here is the quote:
Kinma said:
I had the same problem last week.
I suspected it had to do with the EXT3 partition.
Solved it by first flashing the OTA 2.2 ROM (for rooted users) as this does not use the EXT3. Then used Rom manager to recreate the EXT3.
Now all ROMs that use the EXT3 run fine!
Click to expand...
Click to collapse
(thanks Kinma for the feedback)
So, i start a search for OTA update file here, and found at "showthread.php?t=885996".
But when i choose "Apply sdcard:update.zip", i got INVALID OPERATION.
Someone have a tip for me about this?
Thanks (its very sad, but i must keep hope).
dogasantos said:
(thanks Kinma for the feedback)
Click to expand...
Click to collapse
You are welcome.
What happened was that after a reboot of the phone the phone started rebooting in the boot sequence, i.e. a boot loop.
I tried a lot of things and nothing worked.
Finally I suspected that the problem might be with the SD card. I had a backup, so I had no problem doing a factory reset.
Then I booted the phone without the SD card.
The phone booted fine.
That way I was certain that the problem was with the SD card.
I had 2 partitions on the SD card, an EXT3 part and the rest was a normal Fat part.
I could still read the card, so I made a backup of all the data on the card.
Then I reformatted the card using windows.
The phone booted fine with an empty, reformatted, SD card.
Since I use Apps 2 SD, I had to recreate the EXT3 partition.
If your rom does not use this, you do not have to do this.
After recreating the EXT partition, put back all files that I want on my SD card.
My advice would be to do a factory reset and after that boot the phone without the SD card.
If the phone boots, you know the problem is with the card.
Hope that helps; good luck!
dogasantos said:
Sorry ask for your help again, but at Official thread (thread number 841207) for DHD files, both 1.72.405.3 links are broken.
So i search for another thread, and found another one, but when i run the .exe, it ask for a USB connection to device, so it appears wrong.
Could you gimme a hand to find the correct file?
PS: I can help with a web hosting to all correct files.
Click to expand...
Click to collapse
Here, use this link:
http://forum.xda-developers.com/archive/index.php/t-899564.html
From "football" post copy and paste his link, the download would start immediately..
Hi folks,
boot without the SD card, doesn't work =(
I'm really without luck with this.
I do:
- Factory reset
- Clear cache and userdata
- Boot without SD or/and SIM cards
- Reflash RUU WWE 1.72.405.3 Radio 26.04.02.17_M2
- Reflash RRU WWE 1.72.405.3 Radio 26.04.02.17_M2 SF
- erase all SD
One show was use OTA update.zip, but at this step i got "invalid operation"
SO, nothing works!
Well, it appears a lost battle =\
thanks folks for all help.
Yeah, there must be something wrong in your device itself, for example a motherboard fault. Send it back to HTC.
yukinok25 said:
Here, use this link:
http://forum.xda-developers.com/archive/index.php/t-899564.html
From "football" post copy and paste his link, the download would start immediately..
Click to expand...
Click to collapse
Hi,
I found the information extremely useful. Big Thanks
GRuti

[Q] need help on the elocity a7

Everyone mod is working i geuss except for mines i don't know what am doing wrong.
i tried to mod mine with the dexter mod 1.41 and mines wont work,
1st- i download the file didn't unzip it then i sent it to the SD card and rename it "update.zip".
2nd- i did the factory wipe/reset then i select to wipe all data
3rd- i select update.zip but i notice an message saying( E. can't read from SD card, or something like that). i dont know if that is apart of the mod or what.
4th- when it is finish then i select reboot option and when it is done rebooting i get nothing new. can you help me out are do you know something that i might be doing wrong. i also did do the 1.42 patch aswell didn't work. are is there any other newer way to do it are what. Even if you can write step by step on how to do it properly.
PLEASE HELP ME OUT.
Did your a7 have a sdcard problem before the attempt ?
And even tho it sed it can't read sdcard, did it proceed to install anyway ?
yes it did go ahead with the installation, but it is during the installation process where i saw something about can't read error, i jus got it yesterday then i did the new update from elocity website. then i tried al,ost all of dexter's mod
these are the exat message i got was (E:can't open/usb/update.zip)
(E:Can't mount USB:update.zip)
then underneath that it say (Finding update package)
then it say (Wait for 5 second)
(Installation time out)
(installation aborted)
(Formatting MISC)
these are all the thing it say during installation
Does your a7 read, mount and unmount the sdcard stock?
What is the path to the update.zip?
Sorry for all the questions, I'm just trying to get on the same page
Sent from my Mynized EVo 4G
I'm having just about the same problem. Will be interested to hear any helpful suggestions. At this point, the only thing that is working is to do the factory reset and use the basic version again. I keep getting a message that "update.zip" (although I named it "Update.zip") is a bad file. I also did not get "apply sdcard:update.zip" as a menu option, only "apply:update.zip", which when clicked did read the sd card, then gave the bad file message.
update
Lemme clarify first then update. I bought the A7 in February and loaded the most current Dexter mod at that time. It's been running beautifully until this week. Over a period of days, the A7 started acting up until it was no longer usable at all. First, the BlueTooth cut out, then the WiFi, then it just got stuck and was repeatedly lighting up the Elocity logo, but never fully booting up.
Elocity support said to do the Factory reset, which I did and it was back to baseline again. Trying to install the latest version of Dexter is where my problem started. (end of history)
So, now the update for this evening: I tried every version of Dexter's mods and got the "bad" file message each time, even after downloading them again to be sure I wasn't using a corrupted copy. However, my A7 will wipe, then update with Elocity Firmware 2.0134 and read it just fine on the exact same SD card when renamed "Update.zip".
So, now I have a very frustrated boy with autism who can't do his Google Voice search anymore and the Android Marketplace doesn't let me download the apps I already bought for him. We're back to where we were when it arrived out of the box in February, but unable to restore what we had.
I have to think there's a conflict between Dexter's Mods and the new firmware, even after one wipes everything. I even tweeted Dexter (and I don't *do* Twitter!) to see if he could respond for help and am waiting for a response.
Can someone please help? Thanks!!
Sounds like your having issues with the files you download, I have gotten in the habit of not renaming the update file to just that until its on the usb card. Seen to many messages like yours if I saved one update over a prior with the same name. Try download 1.41 and 1.42 leave their names the way they are and save them to folder on your computer. Copy them bother to sd-card leaving names the same still. once both are there rename 1.41 to Update. Remove card from pc put in tablet. Use the recovery system method (press then hold power button method) do wipe, clear cache, the use update option. If this is successful which it should be delete the 1.41 file on card that you renamed to Update, this can be done on tablet or computer. Once that file is gone rename the 1.42 to Update and once again flash from recovery system.
Hope that solves your issue
Make it a habit to not save an update over top of another, though it seems like it would keep you from having to rename but for me it always seemed to corrupt the file.
thanks! I'll give that a try. I notice you said "PC", but I have a Mac ... could that be part of the issue ... downloading to Mac, then moving the file to SD or USB? (could be a stupid question, but if I don't ask, that makes me even more ignorant)
cwolfpack3 said:
thanks! I'll give that a try. I notice you said "PC", but I have a Mac ... could that be part of the issue ... downloading to Mac, then moving the file to SD or USB? (could be a stupid question, but if I don't ask, that makes me even more ignorant)
Click to expand...
Click to collapse
Do you end up with a folder or a zip file? Safari has a bad habit of extracting zips when it downloads them. Search my posts, there is a long ranting one that covers issues with both PC and Mac.
they're zipped ... I use Firefox 4.0, when the option comes up at download, I always click "save", not "open". Thanks, though.
well, problem solved. I ran Bestial's gapps patch over top of the new eLocity firmware and i have full functionality again. very happy mom here! now to reload all those apps for my boy! =D
Wow, I'm glad you found a solution...I have been following the thread and was getting worried.
I had the same problem after downloading the newest elocity update and then trying dexter's mod. I found out my problem is that I renamed the file "update.zip". If you just rename the file to" update" then it loaded fine. Not totally sure why this worked and maybe it was just my case, but maybe it will help some of you out!
bft305 said:
I had the same problem after downloading the newest elocity update and then trying dexter's mod. I found out my problem is that I renamed the file "update.zip". If you just rename the file to" update" then it loaded fine. Not totally sure why this worked and maybe it was just my case, but maybe it will help some of you out!
Click to expand...
Click to collapse
No. Your problem was that you were using a windows machine and your file extensions were hidden (I am psychic, but don't worry, I won't tell anyone your pin number). She is using a Mac, no hidden file extensions.
How do you get to the gapps patch? I'm really having trouble getting any updates on my a7. seems like its not taking anything off the sdcard. i brought a new card and I'm still having the same issue.
sbradby said:
How do you get to the gapps patch? I'm really having trouble getting any updates on my a7. seems like its not taking anything off the sdcard. i brought a new card and I'm still having the same issue.
Click to expand...
Click to collapse
bestialbub's patch for google apps (to use the market) can be found at http://forum.xda-developers.com/showthread.php?t=1019846 with the instructions
It's still working very well for us ... several weeks later.
Good luck!

Htc hd2 noob!

Hi all. I feel such a pain for this because to the people who know what they are doing its probably as easy as pie. But I simply don't have a clue do here goes nothing lol...
So I bought a used htc hd2. And I dont like the Windows OS. I Want to change it to android and Thought it would be easy I have tryed watching endless videos and searching for "how to" guides but the things I am doing just wont work. I would really be grateful if somebody could give me help :fingers-crossed:
Please fire away with questions and I will try answer the best I can.
Thank you for reading even if you cant help
From what I know you need to get hspl 2.08 and then flash magldr and then clockwork mod recovery and Then android
rocking out with my android powered ics sense-ation XE B-)
Thanks for the reply, I Have already tryed to download the HSPL and fell at the first hurdle... I think I am right that I need the HSPL before I flash anything? but when I downloaded the HSPL4 put the phone into mode were there is the red green blue and white screen (sorry dont know the correct term for it) and at the bottom I seen in a video where it says "serial" it is supposed to change to "usb" when connected to my computer? Well this didnt happen for me... SOOO, Im LOST!!
There are some windows mobile builds with built in Android. I would look out for them. It would make things a lot easier till your able to get an idea of whats going on. There is a site called http://www.cellphonerepair.net/ The one in VA when I called a few years ago said they could root my phone and install Android on it for $50. There is also a guy on facebook that can do it but charges a arm and a leg. I guess if your really pressed and want it really bad you could always go that route. I would watch the video's though on youtube. In fact watch them a couple times before trying to do anything. Here's a good nand how to while this one might be better if you want a sd build. There are also how to guide's available on ebay for purchase that range from just a dollar or two all the way to about $20. I think having a look at this would be your best bet. There is also a section for "easy android" that may shed some light on some of your questions you may run into. Maybe you might find looking at the youtube video's and reading a little more informative and then feel a little more confident in giving it another go. I know I had to do it that way and I already had a lot of experience from rooting and installing android on the touch pro 2.
Hi, I wouldnt really mind paying for it to be done properly but Im from the UK not US so I dont think that link would be much use. Thanks anyway.
Ok. I have just successfully flashed HSPL4 onto my device. And I am ready for the next stage. I have read this is the MAGLDR. How do I go about getting this onto my device?
Jcarney90 said:
Ok. I have just successfully flashed HSPL4 onto my device.
Click to expand...
Click to collapse
Just a note to point out that hspl4 can install 2.08.0000 2.08.hspl 2.10.0000 2.10.hspl 3.03.0000 and 3.03.hspl, so simply "flashing hspl4" is a bit of an open statemnt with no facts.
My point is that magldr will ONLY work if you chose 2.08.hspl, anything else and magldr wont start.
Hi again, I need some more help if anyone can understand my nooby efforts of explaining what I am up to Gettin tired of the same screen now and beginning to want to through the phone off the wall. I have getting to what I think from watchin endless amounts of videos the end of the process. But I am lost on how to get the actual android rom onto the phone. Currently this is were I am up to...
a black screen which reads
aMAGLDR V1.13
Build: Feb 1 2011 03:45:07
by cotulla 2011
Boot menu:
1. Boot WPH
2. Boot AD SD
3. Boot AD NAND
4. UDB MassStg
5.USB Flasher
6.USB TTY
7.AD Hardreset
8.AD Recovery
9.Tetris
10.Services
11.Reset
12.PowerDown
This is were I am up to I have tryed to download android roms but dont think I am going the right way about storing them on my computer so they can be put onto the phone? I might be totaly wrong. PLEASEE HELLPP!
have you flashed cwm(clockwork, cwm, cwr, recovery - its called many things)
cos you cant flash teh rom from magldr itself.
so, assuming you havent, , first pick a rom, , for example typhoon. It requires a 150meg partition, , it says so in post 1 or 2, , all roms will tell you this, its important. Dont just think 'oh ill set it to 400meg and then all roms will fit', because you lose any unused space.
SO, from teh magldr screen, choose 'usb flasher', , , , get and run the nand toolkit, , on teh left chooser 150, in cache set to 5, then click magldr repartition.. This will install cwm AND set up teh partitions.
Reboot
in magldr choose 8 - ad recovery
this will start cwm
(put your rom.zip onto the sd card, anywhere, , if you have a card reader use that, if you dont, in cwm choose mounts - mount sd card - dont use teh magldr mass storage option cos it doesnt work)
then, in cwm choose install zip from sd card - choose zip - browse to teh zip file,
done.
When putting the Android ROM of your choice on your SD card it should be in a zip file and look something kind of like this:
H:\typhoonROM.zip it shouldn't be in a folder like H:\hd2roms\typhoonROM.zip
This is the default location when I plug in my SD card to my computer but yours could be E:\, G:\, J:\ etc..
I dont know if this is just a load of rubbish but I downloaded this... is it the right thing?
NexusHD2.ICS.CM9.HWA.V2.4.zip - ZIP archive, unpacked size 188,993,659 bytes
Jcarney90 said:
I dont know if this is just a load of rubbish but I downloaded this... is it the right thing?
NexusHD2.ICS.CM9.HWA.V2.4.zip - ZIP archive, unpacked size 188,993,659 bytes
Click to expand...
Click to collapse
Yep (it shouldn't be unzipped by the way). Now just follow this guide from installing CWM onwards and you should be good to go, assuming you have done everything to this point correctly (HSPL2.08, Radio 2.xx.50.xx, MAGLDR). Note that you will have to adjust the step where it says to flash the correct partition size to the one required for your ROM of choice. The easiest way is probably to use the HD2 Toolkit rather than flashing one of the ones provided, but if you want to you can download one of the CWMs at the bottom of the guide I linked and edit the flash.cfg.
Hi, Thanks for the reply, I have had a look at the guide you posted and it looks better than some of the videos I have been watching on youtube but I dont think I have done the radio bit I have forgot anyway I can tell or anyway I can start over again if I have missed it out?
Jcarney90 said:
Hi, Thanks for the reply, I have had a look at the guide you posted and it looks better than some of the videos I have been watching on youtube but I dont think I have done the radio bit I have forgot anyway I can tell or anyway I can start over again if I have missed it out?
Click to expand...
Click to collapse
Also I have winRar on my computer and that is how the android file has been un zipped how do I stop winRar from un zipping files when I download then?
Thanks.
Jcarney90 said:
Also I have winRar on my computer and that is how the android file has been un zipped how do I stop winRar from un zipping files when I download then?
Thanks.
Click to expand...
Click to collapse
it only unzips them if you double click them, , ,dont double click them, download the zip and move/copy it to sd card, dont click it.
Does that mean I will have to download the file again? :S
Jcarney90 said:
Does that mean I will have to download the file again? :S
Click to expand...
Click to collapse
I personally use 7Zip instead (it's easier and it's free) so I don't quite know, but in 7Zip you don't need to re-compress the contents or anything. That guide is indeed very good and detailed, and to check if you have the right radio, just reboot the device. In the bottom right of the screen (or maybe bottom left, you'll be able to tell when you see it) there's some text. The line next to the R is your radio version. It should be 2.xx.50.xx for you to proceed. If not, then you need to change it.
Jcarney90 said:
Does that mean I will have to download the file again? :S
Click to expand...
Click to collapse
no because even if you did unzip it, the original zip will still be there and intact wherever you downloaded it to. (unless you chose 'open' instead of 'save' when you clicked the download link, which would be an incredibly stupid thing to do, you have no idea what a file is, and your AV software stands a much better chance of catching baddies when you save them rather than open them directly from the web.)
Nigeldg said:
I personally use 7Zip instead (it's easier and it's free) so I don't quite know, but in 7Zip you don't need to re-compress the contents or anything. That guide is indeed very good and detailed, and to check if you have the right radio, just reboot the device. In the bottom right of the screen (or maybe bottom left, you'll be able to tell when you see it) there's some text. The line next to the R is your radio version. It should be 2.xx.50.xx for you to proceed. If not, then you need to change it.
Click to expand...
Click to collapse
When I reboot it goes straight to the aMAGLDR menu... :S and there isint anything in the bottom cornors
Ok android is now onto my phone but when I turn on it doesnt go to the menu it goes onto a HTC screen then followed by a black screen with android in blue/white moving writing... but this is as far as it goes :| whats happend now!!

Categories

Resources