Hi all. I feel such a pain for this because to the people who know what they are doing its probably as easy as pie. But I simply don't have a clue do here goes nothing lol...
So I bought a used htc hd2. And I dont like the Windows OS. I Want to change it to android and Thought it would be easy I have tryed watching endless videos and searching for "how to" guides but the things I am doing just wont work. I would really be grateful if somebody could give me help :fingers-crossed:
Please fire away with questions and I will try answer the best I can.
Thank you for reading even if you cant help
From what I know you need to get hspl 2.08 and then flash magldr and then clockwork mod recovery and Then android
rocking out with my android powered ics sense-ation XE B-)
Thanks for the reply, I Have already tryed to download the HSPL and fell at the first hurdle... I think I am right that I need the HSPL before I flash anything? but when I downloaded the HSPL4 put the phone into mode were there is the red green blue and white screen (sorry dont know the correct term for it) and at the bottom I seen in a video where it says "serial" it is supposed to change to "usb" when connected to my computer? Well this didnt happen for me... SOOO, Im LOST!!
There are some windows mobile builds with built in Android. I would look out for them. It would make things a lot easier till your able to get an idea of whats going on. There is a site called http://www.cellphonerepair.net/ The one in VA when I called a few years ago said they could root my phone and install Android on it for $50. There is also a guy on facebook that can do it but charges a arm and a leg. I guess if your really pressed and want it really bad you could always go that route. I would watch the video's though on youtube. In fact watch them a couple times before trying to do anything. Here's a good nand how to while this one might be better if you want a sd build. There are also how to guide's available on ebay for purchase that range from just a dollar or two all the way to about $20. I think having a look at this would be your best bet. There is also a section for "easy android" that may shed some light on some of your questions you may run into. Maybe you might find looking at the youtube video's and reading a little more informative and then feel a little more confident in giving it another go. I know I had to do it that way and I already had a lot of experience from rooting and installing android on the touch pro 2.
Hi, I wouldnt really mind paying for it to be done properly but Im from the UK not US so I dont think that link would be much use. Thanks anyway.
Ok. I have just successfully flashed HSPL4 onto my device. And I am ready for the next stage. I have read this is the MAGLDR. How do I go about getting this onto my device?
Jcarney90 said:
Ok. I have just successfully flashed HSPL4 onto my device.
Click to expand...
Click to collapse
Just a note to point out that hspl4 can install 2.08.0000 2.08.hspl 2.10.0000 2.10.hspl 3.03.0000 and 3.03.hspl, so simply "flashing hspl4" is a bit of an open statemnt with no facts.
My point is that magldr will ONLY work if you chose 2.08.hspl, anything else and magldr wont start.
Hi again, I need some more help if anyone can understand my nooby efforts of explaining what I am up to Gettin tired of the same screen now and beginning to want to through the phone off the wall. I have getting to what I think from watchin endless amounts of videos the end of the process. But I am lost on how to get the actual android rom onto the phone. Currently this is were I am up to...
a black screen which reads
aMAGLDR V1.13
Build: Feb 1 2011 03:45:07
by cotulla 2011
Boot menu:
1. Boot WPH
2. Boot AD SD
3. Boot AD NAND
4. UDB MassStg
5.USB Flasher
6.USB TTY
7.AD Hardreset
8.AD Recovery
9.Tetris
10.Services
11.Reset
12.PowerDown
This is were I am up to I have tryed to download android roms but dont think I am going the right way about storing them on my computer so they can be put onto the phone? I might be totaly wrong. PLEASEE HELLPP!
have you flashed cwm(clockwork, cwm, cwr, recovery - its called many things)
cos you cant flash teh rom from magldr itself.
so, assuming you havent, , first pick a rom, , for example typhoon. It requires a 150meg partition, , it says so in post 1 or 2, , all roms will tell you this, its important. Dont just think 'oh ill set it to 400meg and then all roms will fit', because you lose any unused space.
SO, from teh magldr screen, choose 'usb flasher', , , , get and run the nand toolkit, , on teh left chooser 150, in cache set to 5, then click magldr repartition.. This will install cwm AND set up teh partitions.
Reboot
in magldr choose 8 - ad recovery
this will start cwm
(put your rom.zip onto the sd card, anywhere, , if you have a card reader use that, if you dont, in cwm choose mounts - mount sd card - dont use teh magldr mass storage option cos it doesnt work)
then, in cwm choose install zip from sd card - choose zip - browse to teh zip file,
done.
When putting the Android ROM of your choice on your SD card it should be in a zip file and look something kind of like this:
H:\typhoonROM.zip it shouldn't be in a folder like H:\hd2roms\typhoonROM.zip
This is the default location when I plug in my SD card to my computer but yours could be E:\, G:\, J:\ etc..
I dont know if this is just a load of rubbish but I downloaded this... is it the right thing?
NexusHD2.ICS.CM9.HWA.V2.4.zip - ZIP archive, unpacked size 188,993,659 bytes
Jcarney90 said:
I dont know if this is just a load of rubbish but I downloaded this... is it the right thing?
NexusHD2.ICS.CM9.HWA.V2.4.zip - ZIP archive, unpacked size 188,993,659 bytes
Click to expand...
Click to collapse
Yep (it shouldn't be unzipped by the way). Now just follow this guide from installing CWM onwards and you should be good to go, assuming you have done everything to this point correctly (HSPL2.08, Radio 2.xx.50.xx, MAGLDR). Note that you will have to adjust the step where it says to flash the correct partition size to the one required for your ROM of choice. The easiest way is probably to use the HD2 Toolkit rather than flashing one of the ones provided, but if you want to you can download one of the CWMs at the bottom of the guide I linked and edit the flash.cfg.
Hi, Thanks for the reply, I have had a look at the guide you posted and it looks better than some of the videos I have been watching on youtube but I dont think I have done the radio bit I have forgot anyway I can tell or anyway I can start over again if I have missed it out?
Jcarney90 said:
Hi, Thanks for the reply, I have had a look at the guide you posted and it looks better than some of the videos I have been watching on youtube but I dont think I have done the radio bit I have forgot anyway I can tell or anyway I can start over again if I have missed it out?
Click to expand...
Click to collapse
Also I have winRar on my computer and that is how the android file has been un zipped how do I stop winRar from un zipping files when I download then?
Thanks.
Jcarney90 said:
Also I have winRar on my computer and that is how the android file has been un zipped how do I stop winRar from un zipping files when I download then?
Thanks.
Click to expand...
Click to collapse
it only unzips them if you double click them, , ,dont double click them, download the zip and move/copy it to sd card, dont click it.
Does that mean I will have to download the file again? :S
Jcarney90 said:
Does that mean I will have to download the file again? :S
Click to expand...
Click to collapse
I personally use 7Zip instead (it's easier and it's free) so I don't quite know, but in 7Zip you don't need to re-compress the contents or anything. That guide is indeed very good and detailed, and to check if you have the right radio, just reboot the device. In the bottom right of the screen (or maybe bottom left, you'll be able to tell when you see it) there's some text. The line next to the R is your radio version. It should be 2.xx.50.xx for you to proceed. If not, then you need to change it.
Jcarney90 said:
Does that mean I will have to download the file again? :S
Click to expand...
Click to collapse
no because even if you did unzip it, the original zip will still be there and intact wherever you downloaded it to. (unless you chose 'open' instead of 'save' when you clicked the download link, which would be an incredibly stupid thing to do, you have no idea what a file is, and your AV software stands a much better chance of catching baddies when you save them rather than open them directly from the web.)
Nigeldg said:
I personally use 7Zip instead (it's easier and it's free) so I don't quite know, but in 7Zip you don't need to re-compress the contents or anything. That guide is indeed very good and detailed, and to check if you have the right radio, just reboot the device. In the bottom right of the screen (or maybe bottom left, you'll be able to tell when you see it) there's some text. The line next to the R is your radio version. It should be 2.xx.50.xx for you to proceed. If not, then you need to change it.
Click to expand...
Click to collapse
When I reboot it goes straight to the aMAGLDR menu... :S and there isint anything in the bottom cornors
Ok android is now onto my phone but when I turn on it doesnt go to the menu it goes onto a HTC screen then followed by a black screen with android in blue/white moving writing... but this is as far as it goes :| whats happend now!!
Related
So I really want android on my HD2 and after sitting here at the computer for the past 4 hours and getting nothing accomplished i decided to seek help..... I tryed using the "simple" directions and ROM that was offered on stuffmiddleeast.com
For HD2 users, here’s the super-easy way of putting Android on your phone. Download this file and extract the file. Make sure you have at least 70 per cent battery. Remove the SIM card from the phone and you’re ready to go.
You might find that your phone will need to sync multiple times. What that means is you have to start up Windows Mobile Device Center (if you sync up your HD2 to your PC you should already have it, if not – you can download it from here and connect your phone through it.
Step 1
Sync your phone and browse to the HSPL folder and start up HSPL3_PKG.exe. Keep pressing next until the update starts. Do NOT touch the phone until update is over.
Step 2
Sync your phone and browse to the CUSTOM ROM folder and start up ruu.exe. Keep pressing next until the update starts. Do NOT touch the phone until update is over.
Step 3
Sync your phone and browse to the RADIO and start up CustomRUU.exe. Keep pressing next until the update starts. Do NOT touch the phone until update is over.
Step 4
Extract Android.zip and copy it’s content to the MicroSD card folder of your phone via cable or with a MicroSD adapter.
Step 5
Open File Explorer on your phone, browse to the Storage Card and open the Android folder. Select CLRCAD.EXE then run HaRet.exe. Remember to run CLRCAD.exe first as this gives Android Sound. Don’t worry if it does nothing – it’s not supposed to. The first time you load Android, it might take as long as 10 minutes to boot up – so don’t worry if the phone stops responding.
I got through step one i downloaded the rom from megaupload.com as they suggested i extracted the files..... then i followed step one and selected the HSPL folder and i worked fine.... the phone had a pop up that said "you have been hacked or something along those lines...... then i went to step 2 and tryed to open the CUSTOMROM as directed however it seems that the files that were downloaded to my computer read a little differently but i was able to see that it was the file that they were talking about.... so i did that then as step 2 says i tryed to run the ruu.exe..... the file that i downloaded to my computer said ruu not ruu.exe....... i still attempted to run it but it would always tell me that the file has stoped working....... so i am out of ideas.... i loaded and reloaded and still the same thing, i even tryed a different computer..... i am using a windows 7 computer fully updated.... if you could please help me figure out what i am doing wrong or at least give me dummy instructions on how to do this i would totally appreciate it...... im not totally illiterate when it comes to operating tis kinda stuff but if you could keep the verbage and terms somewhat "english" it would be greatly appreciated!!! thanks
Well this is definately not the correct place for this. This is why we have a Q&A section. You do not HAVE to flash a different ROM to run android. It is just preferred. So I guess start here
http://forum.xda-developers.com/showthread.php?t=609477
and after that go read the tutorials in the android section. What did you do with the whole 4 hours at your computer. the step by step info is incredibly easy to find????
You don't need HSPL or a rom and all that crap to run android...What kind of tutorial is that!? Its as simple as...format the memory card on the hd2 to fat32, download the android rom and copy the android folder to the root of the memory card and go to file explorer and find the android folder and click on clrad.exe first then Haret.exe and wait 15 min.....walahh
Sometimes it easier to explain than to find the damm link to the tutorial
COLOR CODED JUST IN CASE
miguel4u2 said:
You don't need HSPL or a rom and all that crap to run android...What kind of tutorial is that!? Its as simple as...format the memory card on the hd2 to fat32, download the android rom and copy the android folder to the root of the memory card and go to file explorer and find the android folder and click on clrad.exe first then Haret.exe and wait 15 min.....walahh
Sometimes it easier to explain than to find the damm link to the tutorial
COLOR CODED JUST IN CASE
Click to expand...
Click to collapse
I did exactly! that with Mdeejay eVo Sense v. 2.3 rEVOlution on ORIGINAL STOCK USA TMOBILE htc hd2 . No Hard spl no custom "Compatible roms" and no BS. Simple . Fully working android and I am not going back . Only thing is don't hook it up to PC with usb . you'll mess it up . to transfer files to and from laptop go to android market and download freeware called websharing . With websharing you connect to your laptop through same wifi as your android . Like I said . Simple
yep...being a noob myself - I went and followed those instructions above and found out I ended up with ChuckyRom! Didn't expect that...now I know better.
Sometimes it's hard to find the right info on the threads...even when searching and trolling around for it...please be patient with the nOObs...we're all just trying to get un-nOObed!
Thanks for the great help and info - this is a most excellent forum!!! Woo and Hoo!
Truely, if you use HD 2 T-mobile with the radio 5.10.50.You NO NEED to do anything, just copy the android folder to your sd card.Go in winmo - exploder and click on 2 file CLRCAD and HARET and it will run.
If battery is always 60ma when screen off, try to reformat you sd card(FULL and 32kb locate) and use setcpu, this will help.
bro. this stupid easy to install android and you dont have to flash. Just look at any android rom you want and there are instructions on how to install and run them smoothly. read up and others have explained this easy. Its as simple as 123. I couldnt imagine what youve been looking at for 4 hours. Good luck man. and welcome to the world of HD2 Android.
miguel4u2 said:
You don't need HSPL or a rom and all that crap to run android...What kind of tutorial is that!? Its as simple as...format the memory card on the hd2 to fat32, download the android rom and copy the android folder to the root of the memory card and go to file explorer and find the android folder and click on clrad.exe first then Haret.exe and wait 15 min.....walahh
Sometimes it easier to explain than to find the damm link to the tutorial
COLOR CODED JUST IN CASE
Click to expand...
Click to collapse
That doesn't work though if you have a branded ROM and can't update to the lastest stock ROM though, am I right?
Thread moved to Q&A, cleaned, and closed.
Hey guys, I have searched high and low and can't find anything related to my problem. I have decided to switch my HD2 over from mw to android, and I have hit a wall.
I know exactly the procces of how it should be done, but my problem is this:
My volume rocker key is broken, and unfortunately I have no way of navigating through magldr to do the required steps, thus do NAND flashing for me.
My question is this, does anyone know of any other way to get it done, maybe using adb?? And if it's possible, where can I find the command lines to do it?? Is there any alternate method of flashing to NAND on the HD2?
Do this downloadcLK, also download Google Android drives. Finally download the ROM you want, but make sure you downloadcthe cLK version of the ROM.
Now create 3 folders on your desktop as that will be the easiest place to find them. I know these are gineric names but it is to help make it easier for you. Name one folder cLK, one folder Android drivers, and on folder Android ROM.
Next extract the contents from the cLK. zip file to the cLK folder, extract the contents of the Google Android drivers .zip file to the Android drivers folder, and finally extract the contents of the ROM .zip file to the Android ROM folder.
Now boot your HD2 into bootloader and connect your HD2 via USB cable to your computer. Wait for the Serial in the white bar of bootloader to change to USB and then open the cLK folder and right click on the custom RUU and select run as administrator. When cLK is done flashing your HD2 will reboot but do not unplug the USB cable yet.
If you are running Windows 7 the Android USB drivers should auto install. But if not go to device manager in the control panel and find your HD2, it should be listed as "Android phone". If it is not dropped down from the main device list then click on it to make it drop down. Then right click on the dropped down icon and select update drivers, then select from computer in the pop up window, then find the Android drivers folder and click done. This should install the USB drivers for your HD2 and you should see "processing fastboot commands on your HD2 screen.
Now open your Android ROM folder and find the. img file and right down the name of it. Then go to start menu on your computer and in run or search type in CMD. If you have to type it into search go up to the top of the start menu window and click on the CMD icon that will be there, if you typed it into run just hit enter.
Now in the comand promt box that CMD brought up type in this command.
cd C:\Android ROM then hit enter, next type
fastboot flash (the name of the .img file you wrote down).img leave the (&) out but type the name of the img file in including the .img. This should flash the ROM. Next type
fastboot reboot and your HD2 should reboot and boot into your Android ROM.
But it will be impossible to get into bootloader with a broken volume rocker though right?
Sent from my HTC HD2 using XDA App
huggs said:
But it will be impossible to get into bootloader with a broken volume rocker though right?
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
Yeah of the volume down part of the volume rocker is not working you can not getconto bootloader. But if they still have Windows Mobile on their phone they can install either Touch Tools or Anistasia's End Key to their HD2 and get to bootloader that way. Both of these apps allow you to access the bootloader via the touch screen, they just run the bootloader.exe is all.
Thank you for all your help. I am stuck with one problem...
Any roms that I have download that are cLK roms, have only 3 files in them.... a boot.img file, META-INF folder, and system folder....
In the last bit of information you gave me, you tell me to flash the .img file that I find in my android rom folder... in my case, is that the boot.img file?? what happens to the other 2 folders that are in the rom zip (META-INF and system)
Thanks once again for all your help!
L
atsavlis said:
Thank you for all your help. I am stuck with one problem...
Any roms that I have download that are cLK roms, have only 3 files in them.... a boot.img file, META-INF folder, and system folder....
In the last bit of information you gave me, you tell me to flash the .img file that I find in my android rom folder... in my case, is that the boot.img file?? what happens to the other 2 folders that are in the rom zip (META-INF and system)
Thanks once again for all your help!
Click to expand...
Click to collapse
Hmmmm that is a good question. To be honest I amcreally not sure as I am going on information I haveclearned from my research. I know the boot.img is what you want to type in the command I told you about. I also think thatcwhen you usecthat command it flashes that img and the other files to cause you have to type in the directory of the folder they are I'm first (the cd C:\Adroid ROM). Also I know this the boot.img is the kernel and the system folder is the Android system. I don't know what the META-INF file is to be honest. But I have asked and been told that following what I instructed above will flash a ROM.
T-Macgnolia said:
L
Hmmmm that is a good question. To be honest I amcreally not sure as I am going on information I haveclearned from my research. I know the boot.img is what you want to type in the command I told you about. I also think thatcwhen you usecthat command it flashes that img and the other files to cause you have to type in the directory of the folder they are I'm first (the cd C:\Adroid ROM). Also I know this the boot.img is the kernel and the system folder is the Android system. I don't know what the META-INF file is to be honest. But I have asked and been told that following what I instructed above will flash a ROM.
Click to expand...
Click to collapse
Worried to try it out just incase it doesn't work... and thne im stuck and can't reflash.... I have asked around in other threads, but unfortunately no help.... :-/
atsavlis said:
Worried to try it out just incase it doesn't work... and thne im stuck and can't reflash.... I have asked around in other threads, but unfortunately no help.... :-/
Click to expand...
Click to collapse
Yeah I agree it is wierd, but you are only flashing a splash screen which does not touch the ROM partition of the NAND memory. So I don't feally see it causing you not to be able to flash anything else.
So are you just scared it will do that or that it did do that?
T-Macgnolia said:
Yeah I agree it is wierd, but you are only flashing a splash screen which does not touch the ROM partition of the NAND memory. So I don't feally see it causing you not to be able to flash anything else.
So are you just scared it will do that or that it did do that?
Click to expand...
Click to collapse
Lol, nope didnt try it... I have been running it off my SD card, but I hate the battery drain on it... at times it can go up to 300+mA
Worried that if I do it, and I cant load into android, then there is no way for me to get back into bootloader to re-flash winmo, or any other android rom...
Been searching my head off, and nothing out there!!!!
atsavlis said:
Lol, nope didnt try it... I have been running it off my SD card, but I hate the battery drain on it... at times it can go up to 300+mA
Worried that if I do it, and I cant load into android, then there is no way for me to get back into bootloader to re-flash winmo, or any other android rom...
Been searching the HD2 General my head off, and nothing out there!!!!
Click to expand...
Click to collapse
Yeah you are right about that. If things go bad you will not be abale to get to bootloader. Have you tried American Android on SD? I have read a lot of good stucc about it. I used Warren Bread on SD befor I went NAND, it was a build that was put out just befor American Android by one of the developers of Americsn Android. Anyway was not that bad on battery drain. Oh yeah I think I would just run Android from SD if I was you until hou are abale to vet your volume button fixed just to be safe lol.
T-Macgnolia said:
Yeah you are right about that. If things go bad you will not be abale to get to bootloader. Have you tried American Android on SD? I have read a lot of good stucc about it. I used Warren Bread on SD befor I went NAND, it was a build that was put out just befor American Android by one of the developers of Americsn Android. Anyway was not that bad on battery drain. Oh yeah I think I would just run Android from SD if I was you until hou are abale to vet your volume button fixed just to be safe lol.
Click to expand...
Click to collapse
Yea, waiting on the part to get it fixed... so il stick to the sd version for now... Mine is aeuropean version, so not too sure if the american android will work on mine... bumber!
atsavlis said:
Yea, waiting on the part to get it fixed... so il stick to the sd version for now... Mine is aeuropean version, so not too sure if the american android will work on mine... bumber!
Click to expand...
Click to collapse
It sbould work without any problems, I think that the "American" is just the name of it. Idonot think it means it isdevice spacific I will go check it tbough real quick.
Edit: I just checked the thread on American Android and it zays nothinv about being a TMOUS only build. and I seen several post from people not from America.
T-Macgnolia said:
It sbould work without any problems, I think that the "American" is just the name of it. Idonot think it means it isdevice spacific I will go check it tbough real quick.
Edit: I just checked the thread on American Android and it zays nothinv about being a TMOUS only build. and I seen several post from people not from America.
Click to expand...
Click to collapse
Busy trying it out.... lets see. Which rom have you flashed on your nand??? I like the look of the boyppc roms. Had any good experience with a specific rom?
atsavlis said:
Busy trying it out.... lets see. Which rom have you flashed on your nand??? I like the look of the boyppc roms. Had any good experience with a specific rom?
Click to expand...
Click to collapse
I run Hyperdroid as my daily driver, thi. king about giving Ultimate Droid a try today?
To anyone of knowledge I have a HTC HD2 I have been trying to install Android from on here from many diiferent links etc.. and everytime I installit to mycomputer then unzip and install on my SD i run the Clcrd then Haret then my phone either shows a penguine or htc logo I let it sit for over 2 to 4 hurs everytime i try to install it on my phone and it just sits there. is it something Im not doing are there steps Im missing or things I need to installl along with the android program i choose I am super frusrtated can someone please help me get android up and running .. Thanks
mallfox said:
To anyone of knowledge I have a HTC HD2 I have been trying to install Android from on here from many diiferent links etc.. and everytime I installit to mycomputer then unzip and install on my SD i run the Clcrd then Haret then my phone either shows a penguine or htc logo I let it sit for over 2 to 4 hurs everytime i try to install it on my phone and it just sits there. is it something Im not doing are there steps Im missing or things I need to installl along with the android program i choose I am super frusrtated can someone please help me get android up and running .. Thanks
Click to expand...
Click to collapse
you should try looking in SD DEVELOPMENT lol,but to be honest,why would u want to install it on ur sd card when u can have nand lol,if u have it on your sd card,everytime you reboot your phone,it'll go back to windows mobile,stay well away from sd card,none of that **** copying intrid & zimage to the root of your sd card lol and haret to sort the sound out,go with nand,you won't regret it
I agree with Ty5982. Nand builds are much faster booting and reliable compare to SD. Any reason why you want SD build?
mallfox said:
To anyone of knowledge I have a HTC HD2 I have been trying to install Android from on here from many diiferent links etc.. and everytime I installit to mycomputer then unzip and install on my SD i run the Clcrd then Haret then my phone either shows a penguine or htc logo I let it sit for over 2 to 4 hurs everytime i try to install it on my phone and it just sits there. is it something Im not doing are there steps Im missing or things I need to installl along with the android program i choose I am super frusrtated can someone please help me get android up and running .. Thanks
Click to expand...
Click to collapse
Agreed with other two posters, NAND is much better. As for your issue, I think it may be radio related, upgrade to HTCs latest official stock ROM 3.14
There's nothing wrong with SD builds. They're great for trying out Android without voiding your warranty, or to be able to dual boot Windows Mobile and Android, or to multi-boot NAND Android and different SD builds thru MAGLDR.
Just follow the instructions in the thread where you downloaded the build from, and all should be well.
Don't rename the folder that all the files such as HaRET and CLRCAD are in.
Go into that folder, open the startup.txt file in a text editing program, and check to see if it has a line that says Rel_path=
After Rel_path= it should say the name of the folder all your Android files reside in. If it's a different name than the folder name, re-name the folder to match the rel_path line, so if it says Rel_path=Droid69, then rename the folder to Droid69, and not droid69 as it is upper/lower case sensitive.
If you still can't get that build to run, try another I guess.
huggs said:
There's nothing wrong with SD builds. They're great for trying out Android without voiding your warranty, or to be able to dual boot Windows Mobile and Android, or to multi-boot NAND Android and different SD builds thru MAGLDR.
Just follow the instructions in the thread where you downloaded the build from, and all should be well.
Don't rename the folder that all the files such as HaRET and CLRCAD are in.
Go into that folder, open the startup.txt file in a text editing program, and check to see if it has a line that says Rel_path=
After Rel_path= it should say the name of the folder all your Android files reside in. If it's a different name than the folder name, re-name the folder to match the rel_path line, so if it says Rel_path=Droid69, then rename the folder to Droid69, and not droid69 as it is upper/lower case sensitive.
If you still can't get that build to run, try another I guess.
Click to expand...
Click to collapse
the hd2 was built so it could manage without a warranty.............so let the beast come out of the phone and go nand,no 2 ways about it
NAND and SD is even better, check my sig
a Im also In Toledo is there any way I can get u to help me do this correctly i will inbox my # to u
Yeah i cld probly help ya out, pm me
Sent from my HTC HD2 using XDA App
huggs said:
There's nothing wrong with SD builds. They're great for trying out Android without voiding your warranty,
Click to expand...
Click to collapse
Dude, if you're worried about warranty you are on the wrong site
Also, even if it does void your warranty, Its easy to get your device back to stock. Its not as if you need to open your device and rip the warranty stickers to get Android on nand lol.
No, I'm clearly not worried about my warranty, I was simply pointing out that that is one of the advantages of SD builds. Some people are worried about their warranties, or afraid they might brick their phone flashing a nand rom, and the sd builds are a safe alternative for risk averse or less experienced members.
I didn't say sd builds are the only or best way to go, I just said theres nothing wrong with them. Additionally, I don't think this is the wrong site for those who are worried about their warranties, there's still a wealth of information on this site for those who don't want to void their warranties.
Sent from my HTC HD2 using XDA App
Which Radio do you have? I had similiar problems to you but changing radio resolved them all, the first boot of any SD build should not take more than 20min, more means you're stuck. But again, NAND Roms are totally better then SD - faster, more stable, better battery usage etc. And Android wins with WinMo 6.5 in every challange so I would consider flashing a NAND ROM if I were you. Hyperdroid for the very beginning - definitely the best ROM available.
mallfox said:
To anyone of knowledge I have a HTC HD2 I have been trying to install Android from on here from many diiferent links etc.. and everytime I installit to mycomputer then unzip and install on my SD i run the Clcrd then Haret then my phone either shows a penguine or htc logo I let it sit for over 2 to 4 hurs everytime i try to install it on my phone and it just sits there. is it something Im not doing are there steps Im missing or things I need to installl along with the android program i choose I am super frusrtated can someone please help me get android up and running .. Thanks
Click to expand...
Click to collapse
I think you should use one of latest ROM below and notice with some instruction on this topic, everything will ok:
http://forum.xda-developers.com/showthread.php?t=1010498
HELP ME!
Okay I don't know if I'm posting on the right thread or not but I need help. I want to install the IceCreamSandwich/jellyBean rom on my HD2 SD card as well, its my only option since my usb port is broken. I already had gingerbread installed but I want to upgrade. I formatted my SD card (don't ask me why) by mistake. So whenever I cut my phone on it goes to the bootloader menu and somehow I navigate myself back to gingerbread. I'm a "noob" so I have little to no idea what I'm doing. Is installing this after all I've done even still possible? I need help please and thank you!
i tried the whole day yesterday to load NAND androind on my HD2 and gave up,
loaded radio fine, HSPL fine, MEGLDR fine, ready in MEGLDR USB mode fine...
and then the guide will ask me to run the DAF from the MEGLDR folder nothing happens as missing files..
i downloaded 5 diffrent android ROM's but there are only folders.. what should i do with those folders??
i am an old dumb guy... used to the WM 6.5 ways.. run the RUU and install the ROM..
hope some one can help me
truffle1234 said:
i tried the whole day yesterday to load NAND androind on my HD2 and gave up,
loaded radio fine, HSPL fine, MEGLDR fine, ready in MEGLDR USB mode fine...
and then the guide will ask me to run the DAF from the MEGLDR folder nothing happens as missing files..
i downloaded 5 diffrent android ROM's but there are only folders.. what should i do with those folders??
i am an old dumb guy... used to the WM 6.5 ways.. run the RUU and install the ROM..
hope some one can help me
Click to expand...
Click to collapse
Running DAF from magldr folder is where you have been wrong besides from posting your tragic story in the wrong section of forums, thread reported to mod.
Download a recovery for your phone (Most roms available now do not use the older DAF method but the CWM [ClockWork Mod] method)
After installing magldr, go to usb mode, download a recovery, run DAF inside the folder which you extract/download from recovery thread. Your phone shall reboot, Now select the AD Recovery and a new menu should come up, go to storage and mounts and then select the mount as mass storage. Copy the zip file you get from the ROM thread or whatever source and paste it in the removable drive that shows up on your computer/laptop after having selected "mass storage" option. When transfer is complete, wait for a few seconds and select the unmount option on phone, go back once more to get to the main menu, select install from zip, select zip from sdcard, select the zip file you just transfered. If all went well and you downloaded all the right files, when you select reboot system, your phone should boot into android.
If you need further help, post in the rom thread regarding the problem you face.
please see mskip guide...
Sent from my Desire HD using XDA App
if there was a direct way to communicate with you i would be glad to guide you directly on the go
preferably gmail or hotmail. dont give me fb cos their chat system is very bogus
truffle1234 said:
i tried the whole day yesterday to load NAND androind on my HD2 and gave up,
loaded radio fine, HSPL fine, MEGLDR fine, ready in MEGLDR USB mode fine...
and then the guide will ask me to run the DAF from the MEGLDR folder nothing happens as missing files..
i downloaded 5 diffrent android ROM's but there are only folders.. what should i do with those folders??
i am an old dumb guy... used to the WM 6.5 ways.. run the RUU and install the ROM..
hope some one can help me
Click to expand...
Click to collapse
See this guide.
In future, search before posting and post in the correct forums please, everyone else can so why not you?
Please close this thread
THANKS GUY's.....
i got it at last, sorry i am very slow....
Hi,i am reading this forum since april and i still can't install android on my HTC HD2.Can somebody support me on team viwer?
I will appreciate that.
Thanks
Banica Dardu said:
Hi,i am reading this forum since april and i still can't install android on my HTC HD2.Can somebody support me on team viwer?
I will appreciate that.
Thanks
Click to expand...
Click to collapse
The guides are really simple. All you need to do is read evrything carefully. All the steps are layed down and are very clear. Would u like me to reccomend a guide?
Sent from my HD2 using XDA
http://forum.xda-developers.com/showthread.php?t=. There you go. Read carefully
Sent from my HD2 using XDA
After instaling Task 29 with Radio 2.15.50.14 windows won't run.It say green HTC and don't startup.
Thanks a lot for **** up my phone ...
What i can do ?
download radio '2.15.50', the 'nand toolkit' and 'paranoidandroid' rom from android NAND section. (You can change later, i'm just keeping it simple.)
phone into bootloader (voldown and power)
connect USB
when the word 'serial' changes to 'USB' on phone screen, ,
run hspl4.exe and choose 2.08.hspl NOT 2.08.0000, it MUST be 2.08.hspl ONLY.
when phone reboots, hold voldown to return to bootloader
serial changes to --> USB
install the radio (either run the customRUU.exe that came with teh radio,
OR
in the nand tookit, at the bottom left ''browse|install RUU'' choose browse and find the radio file you downloaded (RUU_Signed.nbh probably) then click install RUU
when phone reboots, quickly hold voldown to return to bootlaoder
when serial --> USB
in the NAND tookit click 'install magldr'
when phone reboots, don't touch it, it will start the magldr menu. if it doesn't,. you probably skipped the radio step.
In the magldr menu choose USB flasher
in the nand toolkit at the top left make sure 'magldr repart' is selected, then below that click the 150 MB
below that type 5 in the cache size box
then in the bottom left click 'repartition'.
when phone reboots let it load the magldr menu,
choose option 8 - AD recovery - this will start clockworkmod
in the clockwork mod menu choose mounts and storage - mount sd card-
copy the paranoid android rom.zip (dont unzip it) to your sd card
(you can also do this through a card reader if you have one)
still in clockwork mod, press end to step back untill you see the 'install zip from sd ', select that, then 'choose zip from sd' , , find where you copied the rom to, select it, sit back, let it install, then choose reboot system now.
done.
zzz i'm newbie,it looks a bit hard....
Can u support me via Team viwer pls? ...ofc if u have time..
It can't be more simple.. You can also use HD2 Toolkit thread (with screenshots). Link in my signature.
Sent from my HTC HD2 using XDA App
If anybody can help me via Team Viwer i wait messages/PMs....
Thanks..
If you find a list of step by steps complicated, then no offence but you probably shouldn't be flashing.
Why not try SD Android?
I tryed all steps but i do something wrong.
.....sd version and many things.I have to go in vacantion in 1 week and i wanted android fast.
That hurry made me crash it...
I can't fix it and no1 want help me with Team viwer so ....
I will try to **** it until it works or i drop it...
Banica Dardu said:
I tryed all steps but i do something wrong.
.....sd version and many things.I have to go in vacantion in 1 week and i wanted android fast.
That hurry made me crash it...
I can't fix it and no1 want help me with Team viwer so ....
I will try to **** it until it works or i drop it...
Click to expand...
Click to collapse
If you just read everything carefully you won't have any problems. As samsamuel said you can't get simpler than that and just use SD Android if you don't know what to do.
Sent from my NexusHD2 using XDA
Banica Dardu said:
I tryed all steps but i do something wrong.
.....sd version and many things.I have to go in vacantion in 1 week and i wanted android fast.
That hurry made me crash it...
I can't fix it and no1 want help me with Team viwer so ....
I will try to **** it until it works or i drop it...
Click to expand...
Click to collapse
listen and read this CAREFULLY. In order to install android on your internal memory ie. NAND installation, you have to follow these steps,
1. Install HSPL 2.08
2. Install Radio 2.15
3. Install MAGLDR or clK ( BOOTLOADERS )
4. Install CWM(clockworkmod recovery)
5. Install the Rom via CWM
6. Voila
You can google how to do this. Flashing means installing(if you dont know)
This is a very simple guide which takes you through all the above steps and all files are available for download. READ READ and READ somemore
http://forum.xda-developers.com/showthread.php?p=11097380
Just a bity of help with installing the ROM on the HD2
adil1508 said:
listen and read this CAREFULLY. In order to install android on your internal memory ie. NAND installation, you have to follow these steps,
1. Install HSPL 2.08
2. Install Radio 2.15
3. Install MAGLDR or clK ( BOOTLOADERS )
4. Install CWM(clockworkmod recovery)
5. Install the Rom via CWM
6. Voila
You can google how to do this. Flashing means installing(if you dont know)
This is a very simple guide which takes you through all the above steps and all files are available for download. READ READ and READ somemore
http://forum.xda-developers.com/showthread.php?p=11097380
Click to expand...
Click to collapse
Sometimes you may run into strange problems when you install the ROM.
Therefore, my recommendation is after installing CWM do:
- Partition your HD2 (using HD2 Tool) 170 Mb (Custom) and 5 Mb Cache
- Copy your ROM to the SD Card (Using USB Mount in CWM)
- Flash your ROM using Choose ZIP from SD Card
- Waitn till it has finished
- FLASH YOUR ROM A SECOND TIME (This may solve written data to Bad Blocks)
- Do not reboot but go to Advanged in CWM and do Error Report
- Copy Recovery.log to your PC Using USB Mount and check this with your favourite Wordprocessor (eg. MS-Word) and look for errors
- if there are errors, try flash again of go back and create a bigger partition (5 Mb Increments will work)
- if OK, then reboot type your SIM/PIN ans leave the phone alone for 5 nimutes at least (all sorts of homekeeping going on)
- Log on using your Google account and after you finish, let the phone finish all synchronisations (may take 10 minutes)
- Then fix your Google Play and start installing apps.
Worked for me
utrecht56 said:
S........... my recommendation is after installing CWM do:
- Partition your HD2 (using HD2 Tool) 170 Mb (Custom) and 5 Mb Cache.
Click to expand...
Click to collapse
During the partitioning process is when CWM is installed, , partitioning wipes / resets the recovery partition, and loads cwm into it, so partitioning 'after' installing cwm is nonsensical.
I assume what you're essentially pointing out is that you have to select a partition size when installing CWM anyway so you may as well do it right the first time, right? Just wanted to clarify to anyone who was unsure of what this meant.
Sent from my NexusHD2 using XDA
yea. for most users, 'partitioning' and 'installing cwm' are the same step. Certainly for magldr, , , perhaps cLK is a little different, but i suspect anyone that knows how to apply cwm without repartitioning, how-to lists don't apply to. Anyone that needs a list, however, could do without teh confusaion of figuring out how to apply cwm and THEN partition.