Related
The fastest way I found of debranding the startup on both orange and tmobile startup screens is by installing a WWE rom. via RUU or update zip. Once you've done this, the startup logos for either orange/tmobile will be automatically removed. Have to say I love the support HTC give for roms for this cos its so easy. Then just use any custom ROM you like and no more BRANDING !!!!!!!!!!!!
Can I just ask;
01; If that using the WWE firmware it will remove the HTC sense UI or still keep it?
02; Can you apply the WWE firmware without rooting the device?
1) WWE is a generic rom as far as I know so it will remove all the branding from mobile networks and only leave HTC stuff on there. Sense stays as it is as its not network related.
2) I've rooted my device and it works. Haven't tried on an unrooted device so can't really answer. If you can get an WWE RUU update it should work without rooting as its and official standard rom.
bayhas said:
1) WWE is a generic rom as far as I know so it will remove all the branding from mobile networks and only leave HTC stuff on there. Sense stays as it is as its not network related.
2) I've rooted my device and it works. Haven't tried on an unrooted device so can't really answer. If you can get an WWE RUU update it should work without rooting as its and official standard rom.
Click to expand...
Click to collapse
Thanks for this info, might try it. I have just read though that you need to root it to do a nandroid backup of the device. I won't do a firmware change without doing a full backup first.
Do you no any method to do a full phone backup without rooting?
Much aprecciated for the assistance.
Right, after reading a ton of posts, threads blogs e.t.c I finally got it managed to do it via the goldcard method, flashrec-1.1.3-20091107-2.apk, recovery-RA-hero-v1.5.3.1, RUU_Hero_HTC_WWE_2.73.405.5_WWE_release_signed_NoDriver, HxD && HTCSync.
Only things I back up are apps and data using MyBackupPro. So don't really need to root it unless you wana save literally everything.
And I've done this via unlockr.com's one click root method (flashrec, etc) not the goldcard method and then installing a generic rom. But whichever works for you best.
bayhas said:
Only things I back up are apps and data using MyBackupPro. So don't really need to root it unless you wana save literally everything.
And I've done this via unlockr.com's one click root method (flashrec, etc) not the goldcard method and then installing a generic rom. But whichever works for you best.
Click to expand...
Click to collapse
I found out that the new rom that T-Mobile/HTC produced locked out flashrec and you had to downgrade the ROM to use flashrec sucessfully. It only worked with the goldcard method and thankyou for your help.
Ye unfortunately networks really can be a pain in the ... I tend to stick to generic or custom roms as they have less in them than network modified roms. Hope it works after the goldcard method as I've never used it.
mod: If this should be in DHD General, please move it
At the moment, sometimes current RUUs (ROM Update Utility) do not flash from the latest RUU exe - many times it will not recognise the Desire HD.
If you are having this problem, this is how to flash the latest stock RUU.
The latest RUU at the time of writing is 1.32.405.6.
You can download the RUUs from xmoo's thread or from mousey_'s site.
note: This is mainly for stock phones, for vendor-derived ones (e.g Vodafone DHDs in Australia) you will also need a goldcard.
Common Steps
Download the latest RUU (1.32.405.6).
Run it as administrator.
Tick the 'I understand the caution indicated above...' box, and click next.
At this point do not go any further.
Navigate to C:\Users\Ivo\AppData\Local\Temp (Replace my username with yours; AppData is a hidden folder)
You should see one or two folders like this:
{719CE201-7B12-4A13-9AF6-8F359FE69C7B}
Go into the one with dotnetinstaller.exe in it.
Open up the next folder.
Copy rom.zip into another folder (outside of temp).
At this point just Cancel and quit out of the ROM Update Utility.
A) Install through PC
Download and install HTC Sync 3.0 and restart.
Download the 1.15.405.1 Test RUU. It is the only one currently known to find the Android DHD.
Start it the same way as before, get to the
1. Connect the Smartphone to the USB Cable.
step. (but no further)
Again, go to the AppData local temp directory (same as above), and find the folder with dotnetinstaller.exe and inside that, rom.zip
You want to delete the rom.zip (which is the 1.15 version) and replace it with (copy back) the 1.32 rom.zip you copied out earler.
DO NOT UPDATE WITH 1.15 ROM, IT IS NOT DESIGNED FOR RETAIL DHDs.
Now click through the next buttons.
The 1.15 Utility should now be set to update with the 1.32 rom. You will see the version number of the rom at the final step.
Click update and watch the magic happen
B) or Install through Phone
With the rom.zip you copied out earlier, rename it PD98IMG.zip
Copy this onto the root of your microSD card through some means (disk drive, ftp, wireless).
Restart your phone and boot into the bootloader by holding power and volume down at the same time as it restarts.
It should go into the bootloader, take a fair while to check the zip on the sd card, and then ask you if you want to flash it.
Say yes!
Hope this can help some people for whom the 1.32 RUUs aren't working for them
Thanks for putting up this post! I was about to request one last night.
Now if only there could be a similar guide to flashing custom ROMs
To force unroot, I could reinstall RUU 1.32.405.6 from Win7 without problems, a bit longer than updating/reinstalling a WinMo 6.5.x rom (my former HD2), but it went through...
Thanks Ivolol this worked a treat
Appreciate your guide and efforts.
I am running Win 7 64. folowed 1.15 method now running latest 1.32.405.6
Howling Wolf said:
To force unroot, I could reinstall RUU 1.32.405.6 from Win7 without problems, a bit longer than updating/reinstalling a WinMo 6.5.x rom (my former HD2), but it went through...
Click to expand...
Click to collapse
Weird; I tested a couple of RUUs (not as many as xmoo did) and all of them couldn't connect to my phone (whereas 1.15 could).
It'd be interesting to find out what the factors are that cause this. ATM the guide above is what to do if someone finds themselves in the same situation (the current ROMs won't find the phone).
Howling Wolf said:
To force unroot, I could reinstall RUU 1.32.405.6 from Win7 without problems.
Click to expand...
Click to collapse
+1 here, went through the normal RUU process fine just for ****s and giggles. I've extracted the ROM.zip though in case it's needed for future use.
sorry for the noob question..just had my DHD for the last 5 days. I come from galaxy S, and in there whenever we flash a rom all the data gets wiped out.
is it true also when we flash a RUU??
also if I do that...would i still be able to get OTA updates??
nandihno said:
sorry for the noob question..just had my DHD for the last 5 days. I come from galaxy S, and in there whenever we flash a rom all the data gets wiped out.
is it true also when we flash a RUU??
also if I do that...would i still be able to get OTA updates??
Click to expand...
Click to collapse
I haven't got complete knowledge of the entire subject yet, but:
a RUU will completely wipe all user settings / apps. Won't do anything to the sd card though.
An update.zip is akin to an OTA update, it does not wipe user settings.
Flashing with a stock RUU will mean that you can still get OTA updates.
I've tried using the phone method and unable to flash successful. I believe you need a valid GoldCard to use this method.
Can you confirm if the GoldCard is required for doing it with the phone method?
In addition, once the unit (especially our Voda branded one) is flashed with the latest ROM, OTA may not run properly which will result in disabled functionality (as recorded in this thread: forums.whirlpool.net.au/forum-replies.cfm?t=1575514, wifi stopped working). Theory said you'll need a GoldCard to get OTA to work properly (from another thread in XDA).
Thanks.
Great Guide thank you very much. Now i know to flash back to stock now if something gose wrong as iam a noob to android it took some time to work it out even tho it is a simple guide now i wanna know after getting perm root how do i flash a custom rom ? do i need clockwork mod?
tleehm said:
I've tried using the phone method and unable to flash successful. I believe you need a valid GoldCard to use this method.
Can you confirm if the GoldCard is required for doing it with the phone method?
In addition, once the unit (especially our Voda branded one) is flashed with the latest ROM, OTA may not run properly which will result in disabled functionality (as recorded in this thread: forums.whirlpool.net.au/forum-replies.cfm?t=1575514, wifi stopped working). Theory said you'll need a GoldCard to get OTA to work properly (from another thread in XDA).
Thanks.
Click to expand...
Click to collapse
There is a big reason I decided to buy my DHD outright and not through Vodafone
I'm pretty sure that Vodafone's OTAs will be different from HTC's. In order to get OTAs from Vodafone you will need their image on it.
Also with vodafone's ROM installed, I wouldn't think it would accept HTC's vanilla ROM/RUU without going through the entire root process (it would only accept Vodafone signed ROMs). So in order to get onto HTC's ROMs I would think you need to follow http://forum.xda-developers.com/showthread.php?t=841076 before the phone will let you run a HTC RUU on it.
I haven't explored goldcards as I personally have no use for one, but you might also need one by the sounds of it for the Vodafone ROM to let you replace it. (edit: yes it looks like you need one to officially flash from a Vendor ROM to a generic one.)
So this guide is mainly for people with vanilla HTC phones. Although someone has posted a stock rooted Vodafone ROM on the phones so you might be able to use the same techniques outlined here with that.
ssimmmo said:
Great Guide thank you very much. Now i know to flash back to stock now if something gose wrong as iam a noob to android it took some time to work it out even tho it is a simple guide now i wanna know after getting perm root how do i flash a custom rom ? do i need clockwork mod?
Click to expand...
Click to collapse
clockwork mod is useful but not entirely necessary. You might be able to use this guide's method to flash a custom ROM onto it (haven't tried yet), but otherwise I think what you need is a recovery img that will let you upload custom/unsigned ROMs onto it. And also S-OFF I imagine.
ok so i have S-OFF and clockwork mod recovery...
if i have the rom.zip and rename it to PD98IMG.zip and run bootloader.
i shouldnt have any problems flashing this rom??
BTW am using Aus branded Vodafone HDH.
also..IF i flash this rom..would i loose S-Off and clockwork recovery mod??
would flashing this allow me to gain OTA???
nandihno said:
ok so i have S-OFF and clockwork mod recovery...
if i have the rom.zip and rename it to PD98IMG.zip and run bootloader.
i shouldnt have any problems flashing this rom??
BTW am using Aus branded Vodafone HDH.
also..IF i flash this rom..would i loose S-Off and clockwork recovery mod??
would flashing this allow me to gain OTA???
Click to expand...
Click to collapse
If you flash a stock RUU rom.zip then you will loose all custom apps, data, s-off, recovery, etc. It puts it to factory settings. If you are in the business of flashing ROMs then I wouldn't worry about OTA because the developers here will integrate HTC updates as they come out, if they come out
However yes I think if you flashed a stock RUU then you will be able to get OTA. You might still need a goldcard, I'm not exactly sure.
ivolol said:
mod: If this should be in DHD General, please move it
At the moment, sometimes current RUUs (ROM Update Utility) do not flash from the latest RUU exe - many times it will not recognise the Desire HD.
If you are having this problem, this is how to flash the latest stock RUU.
The latest RUU at the time of writing is 1.32.405.6.
You can download the RUUs from xmoo's thread or from mousey_'s site.
note: This is mainly for stock phones, for vendor-derived ones (e.g Vodafone DHDs in Australia) you will also need a goldcard.
Common Steps
Download the latest RUU (1.32.405.6).
Run it as administrator.
Tick the 'I understand the caution indicated above...' box, and click next.
At this point do not go any further.
Navigate to C:\Users\Ivo\AppData\Local\Temp (Replace my username with yours; AppData is a hidden folder)
You should see one or two folders like this:
{719CE201-7B12-4A13-9AF6-8F359FE69C7B}
Go into the one with dotnetinstaller.exe in it.
Open up the next folder.
Copy rom.zip into another folder (outside of temp).
At this point just Cancel and quit out of the ROM Update Utility.
A) Install through PC
Download and install HTC Sync 3.0 and restart.
Download the 1.15.405.1 Test RUU. It is the only one currently known to find the Android DHD.
Start it the same way as before, get to the
1. Connect the Smartphone to the USB Cable.
step. (but no further)
Again, go to the AppData local temp directory (same as above), and find the folder with dotnetinstaller.exe and inside that, rom.zip
You want to delete the rom.zip (which is the 1.15 version) and replace it with (copy back) the 1.32 rom.zip you copied out earler.
DO NOT UPDATE WITH 1.15 ROM, IT IS NOT DESIGNED FOR RETAIL DHDs.
Now click through the next buttons.
The 1.15 Utility should now be set to update with the 1.32 rom. You will see the version number of the rom at the final step.
Click update and watch the magic happen
B) or Install through Phone
With the rom.zip you copied out earlier, rename it PD98IMG.zip
Copy this onto the root of your microSD card through some means (disk drive, ftp, wireless).
Restart your phone and boot into the bootloader by holding power and volume down at the same time as it restarts.
It should go into the bootloader, take a fair while to check the zip on the sd card, and then ask you if you want to flash it.
Say yes!
Hope this can help some people for whom the 1.32 RUUs aren't working for them
Click to expand...
Click to collapse
As I am Newbie of Android and I have noob quesitons. Could you please explain what is RUU and use this for what purpose?
Yeah. I got a goldcard inside of my phone but the bootloader doesn't recognize the P98IMG on my sdcard even though its there for sure. No idea how to fix this
Dr. lele said:
Yeah. I got a goldcard inside of my phone but the bootloader doesn't recognize the P98IMG on my sdcard even though its there for sure. No idea how to fix this
Click to expand...
Click to collapse
How big is ur sd-card, and also what brand. Sometimes this is also a issue....
It's a kingston 8 gb class 4, but thanks for the tipp, I'll try another.
Yep, it was the sdcard xD. It's updating as I type
Carnt I just use the updater on the pc with the Rom? I have tried the method and I don't see a Rom file just a data1 file which is a ear file. I really would like stock ROM on my device
edit: i just used the exe and it installed perfect, so now it should be stock with no root,and sn
cxeka7 said:
As I am Newbie of Android and I have noob quesitons. Could you please explain what is RUU and use this for what purpose?
Click to expand...
Click to collapse
An RUU is an exe which contains the stock 'firmware' from HTC to flash to your device. Basically it will do a full factory reset of your device. It won't wipe your sdcard but it will overwrite everything else.
it didnt asked me for anything on option B) or Install through Phone. i didnt get the option to flash it.
first, yes i know how to search!
i've found out that when you want to unroot your phone you have to do it using ruu's.
how do i know wich Ruu i should use?
when i install the Ruu, is it just like installing a new rom using clockwork?
and when i've installed the Ruu how do i uninstall clockwork and all the other things that comes with the root?
i am currently using the standard 2.1 update 1 rom for wildfire (original rom)
if you plan not to do rooting and flashing anymore, just update to 2.2. Everything will get original, but you will lose the opportunity to root it again. Otherwise, flash a kinda of unroot image, which comes with unrevoked, i didn't hear about it anyway. Try yourself.
To install the RUU, Download it (It will be an EXE File), install HTC Sync on your PC, Connect your device, and, run it. You will lose Clockworkmod and all root associated apps and priveleges when you unroot it.
First check that you can root your phone.
If you already have Froyo installed on your phone then you will have the new Hboot.
If can root use the old unbranded Eclair Ruu from shipped rom's.
It's in the guide (turkeys guide i think) stickyd at the top of the page.
I also want to go back to using stock ROMs. Froyo actually. The only reason I rooted was to gain app2sd facility which was not there in Eclair.
Now that Froyo is out for wildfire spare me the unstable ROMs. I will go for the Stock one.
I have the RUU for my mobile. But When I run it from PC, I get cannot upgrade your phone. I understand this is because I am having a custom recovery (Mine is ClockworkRecovery).
Now can anyone tell how I can get the stock Froyo ?
Do I need to get the stock recovery back ? Is there a bypass for this ?
Or is there a .zip file intead of RUU.exe files for Stock Froyo ?
Ok, I didn't want to start a thread but I have search for three hours and tried numerous things and i'm confused.
I need an IDIOTS guide to unrooting my phone.
I did a nandriod backup and I have my Standard ROM, I had clockwork but that is gone.
All I want now is the Root gone so I have a standard HTC Wildfire back
I am on Vodafone, UK.
Any help appreciated, i've searched through all the guides downloaded loads of stuff and tried flashing it and it all fails, there seems to be many ways this might work but I can't get passed half of the steps.
If someone could please give me a hand it would be much appreciated.
1.) Create a Gold Card. Follow this guide: http://android.modaco.com/content/general-discussion/305672/creating-a-goldcard/.
2.) Download a RUU that fits your demands and make sure it starts with 2.xx from here: http://shipped-roms.com/index.php?category=android&model=Buzz. I recommend you to download this one: http://shipped-roms.com/download.php?category=android&model=Buzz&file=RUU_Buzz_Froyo_HTC_WWE_2_22_405_1_Radio_13_55_55_24H_3_35_20_10_release_160191_signed.exe because that one is indicated WWE, so it should work world wide.
3.) Install it on your phone using PC. (The file you downloaded should be .exe so you just have to plug your phone to PC in charge only mode and start the .exe you downloaded).
4.) Follow the steps provided by the application.
5.) Wait for it to install. Done.
The file you download must start with 2.xx because that is Froyo (Android 2.2) and that will overwrite your Hboot and remove the root access.
Hit thanks if I helped you.
I think if you do a nand backup before rooting, just restore it with clockworld
smokzye said:
1.) Create a Gold Card. Follow this guide: http://android.modaco.com/content/general-discussion/305672/creating-a-goldcard/.
2.) Download a RUU that fits your demands and make sure it starts with 2.xx from here: http://shipped-roms.com/index.php?category=android&model=Buzz. I recommend you to download this one: http://shipped-roms.com/download.php?category=android&model=Buzz&file=RUU_Buzz_Froyo_HTC_WWE_2_22_405_1_Radio_13_55_55_24H_3_35_20_10_release_160191_signed.exe because that one is indicated WWE, so it should work world wide.
3.) Install it on your phone using PC. (The file you downloaded should be .exe so you just have to plug your phone to PC in charge only mode and start the .exe you downloaded).
4.) Follow the steps provided by the application.
5.) Wait for it to install. Done.
The file you download must start with 2.xx because that is Froyo (Android 2.2) and that will overwrite your Hboot and remove the root access.
Hit thanks if I helped you.
Click to expand...
Click to collapse
This should help
I am right now looking at the gold card and I need a spare micro SD? Can this be done on the standard phone SD or does it need to be on the micro SD?
Also if I just found the newer version of android and kept the root and flashed the updated rom onto my phone, i know it would still be rooted but it'd be like a normal phone again.. right?
Pulling my hair out now.
This is so frustrating.
I cant download a .zip to the phone as it aborts and I can't flash the standard RUU because I don't have a gold card thing?
I don't know whether or not its safe to use my phone SD card or do I need a new one?
Surely theres a simple way around this! I.e Download and flashing the standard rom to the phone and it just working? I am on the standard ROM now with root, I am happy to have the root I just want the updated firmware!
What happened to your Clockworkmod Recovery? You might want to get that back, because it is the only way you can then install Zip files. Can you provide more details? Is your Wildfire S-OFF? Are you on Android 2.1?
Refer Part 5 of the 1st post of this thread:
http://forum.xda-developers.com/showthread.php?t=1029318
The Safe Flash ZIPs of all Froyo RUU's is what you should be looking at. They are the untouched stock Froyo ROM, with only the bootloader and radio removed. But, you'll obviously need Clockworkmod Recovery to run it.
3xeno said:
What happened to your Clockworkmod Recovery? You might want to get that back, because it is the only way you can then install Zip files. Can you provide more details? Is your Wildfire S-OFF? Are you on Android 2.1?
Refer Part 5 of the 1st post of this thread:
http://forum.xda-developers.com/showthread.php?t=1029318
The Safe Flash ZIPs of all Froyo RUU's is what you should be looking at. They are the untouched stock Froyo ROM, with only the bootloader and radio removed. But, you'll obviously need Clockworkmod Recovery to run it.
Click to expand...
Click to collapse
I don't know, how would I find out? I recovered back to december when my phone didn't have clockworkmod. It was just rooted.
So do I need to reflash the clockworkmod onto my phone? Or is there a way of getting it back?
What is S-OFF? (Sorry..) and yeah, I think it's 2.1.
So once I get clockworkmod and run a RUU with a stock rom on it, It will be gone of the clockworkmod rom? And the root? or just the rom?
Thanks!
Interesting how you have root without Clockworkmod. AFAIK, its not possible. Do you see a Superuser Icon on your App Drawer?
If you are still on 2.1, to get back Clockworkmod, you will have to use Unrevoked. Guide here:
http://forum.xda-developers.com/showthread.php?t=824396
Also, if your ultimate goal is removing Clockworkmod and Root and getting official 2.2.1, dont bother with getting Clockworkmod. Just make a Goldcard and flash the RUU then. Yes, flashing an RUU will remove root and Clockworkmod. Also, Goldcards can be any SDCard, including the one included with the phone. But, before using it as a Goldcard, make sure to take a backup because it will have to be formattted.
Tbh, my overall goal was just to get rid of the ROM as it was buggy, and got worse and worse to the extent I couldn't take or watch videos, crashed a lot, etc. etc. Wouldn't download from the market half the time
I'm happy to just leave it rooted, I just want the easiest option to getting the latest update and having the phone "normal" again
I will try what you have said in the first option, if not i'll use my SD card and get cracking
http://forum.xda-developers.com/showthread.php?t=788776
Can I use that to get unrevoked?
I still have the root, is that clockworkmod? As in, I hold down the volume down key and get the menu, I just don't know what to do with it.. Does that help?
Yes, I would recommend that as well. Simply clockworkmod and root will not affect or detract from the stock experience of your phone at all. Also, it will leave the door open for future modifications and customization, if the need arises.
EDIT: Yes you can use that guide as well. Same thing really. Clockworkmod and Root are two different things. Clockworkmod is a Custom Recovery (When you hold down Vol Down and Power Button, Navigate to RECOVERY using the Volume Key, and Press the Power Button on the RECOVERY word. If Clockworkmod opens, you have it. If it doesn't , and you get an image of an Android with a Red Triangle, you haven't got it).
Root is simply the presence of the Superuser binary, and can be determined by the fact if you have a "Superuser" icon in your main app drawer.
smokzye said:
1.) Create a Gold Card. Follow this guide: http://android.modaco.com/content/general-discussion/305672/creating-a-goldcard/.
2.) Download a RUU that fits your demands and make sure it starts with 2.xx from here: http://shipped-roms.com/index.php?category=android&model=Buzz. I recommend you to download this one: http://shipped-roms.com/download.php?category=android&model=Buzz&file=RUU_Buzz_Froyo_HTC_WWE_2_22_405_1_Radio_13_55_55_24H_3_35_20_10_release_160191_signed.exe because that one is indicated WWE, so it should work world wide.
3.) Install it on your phone using PC. (The file you downloaded should be .exe so you just have to plug your phone to PC in charge only mode and start the .exe you downloaded).
4.) Follow the steps provided by the application.
5.) Wait for it to install. Done.
The file you download must start with 2.xx because that is Froyo (Android 2.2) and that will overwrite your Hboot and remove the root access.
Hit thanks if I helped you.
Click to expand...
Click to collapse
Ok I spent the time to go through this properly step by step and search for the stuff that made no sense in making a gold card and finally! I'm done.
Thanks a lot for all your help Just now waiting for it to register that theres an update so I can have the latest android firmware again as i'm still running on what it was on when I bought it haha
Hello everyone
I have purchased a HTC Legend running android 2.2 and wish to downgrade so that I can root and install cyanogenmod on it.
I have used hours trying to install the downgraded RUU but when i get to the point where i have to run crackin.bat from hack4legendv5 the CMD says that I do not have SU permission (when typing adb shell and then su). Nothing pops up on the phone so that i can give superuser rights.
This means that the "crwxww" or something does not come up in the end and when trying to run the 1.31 RUU I receive an error. Have tried to run temproot on visionary without any luck:-(
I am on a machine running win 7 64 bit and the phone is unbranded.
Maybe you can help ?
(I'm Danish so excuse me if my english is bad)
Did you tray this method?it worked for me.
http://theunlockr.com/2010/06/07/how-to-root-the-htc-legend/
Make sure then you have correct drivers and HTC sinc.version.good luck