I bought one of these in China. Not a Chinese one, an actual T-Mobile USA one (much cheaper). The current ROM is in Chinese, and everytime it boots up it has a xda-china logo on the start-up screen, so I'm guessing it's a custom job.
Either way, I want to flash it to an English custom ROM, and I won't have a problem following your excellent tutorials. Except, I worry if it's already been flashed with a custom rom then it wall already have HSPL. Is there a way I can check this, and if not, is anything bad likely to happen by attempting to flash it if it is already on the phone?
Thanks for any help.
Boot into bootloader and check to see what is listed there. To get into bootloader: turn the phone off, then hold volume down+power.
Look forward to your response.
~Jasecloud4
Well well,
PB81*** SS-B3
SPL-2.00HSPL 8G XE
0x05
CotullaHSPL 0x50
I guess that means I'm good to go then?
Thanks very much!
boneycork said:
Well well,
PB81*** SS-B3
SPL-2.00HSPL 8G XE
0x05
CotullaHSPL 0x50
I guess that means I'm good to go then?
Thanks very much!
Click to expand...
Click to collapse
It seems to have HSPl installed already although not the latest one.
You shall start flashing custom ROMs straight away
If possible, update the HSPL to 2.08HSPL.
If that just means following the HSPL tutorial I'll do that now.
Thanks for everything.
My touch screen decided to take a crap on me. Tmobile is sending me a replacement in the mail which should be here in about 5-7 days.
I just need some help returning the phone back to stock. I already removed ChunkyRom using Task29. Then booted the phone to the bootloader to flash the updated Tmobile rom. Now when I boot this is what the screen shows.
PB81120 SS-B3
SPL-2.08 HSPL 8g XE
0x05
CotullaHSPL 0x40
My dad has the same phone (completely stock) and this is what his shows:
pb8 ss-b3
spl-2.10.0000 8g xe
microP(LED) 0x05
MicroP(Touch) 0x40
So I am not sure. I just dont want tmobile to charge my account. Thank you for the advice. I tried to follow some of the posts already on this amazing forum but I wasnt having any luck. I promise I tried to search!
Yeh I am having the same exact problem...My screen just stopped working out of no where and now I need to revert back to original rom radio and hspl...anyone got a link or instructions?
kplonsky said:
My touch screen decided to take a crap on me. Tmobile is sending me a replacement in the mail which should be here in about 5-7 days.
I just need some help returning the phone back to stock. I already removed ChunkyRom using Task29. Then booted the phone to the bootloader to flash the updated Tmobile rom. Now when I boot this is what the screen shows.
PB81120 SS-B3
SPL-2.08 HSPL 8g XE
0x05
CotullaHSPL 0x40
My dad has the same phone (completely stock) and this is what his shows:
pb8 ss-b3
spl-2.10.0000 8g xe
microP(LED) 0x05
MicroP(Touch) 0x40
So I am not sure. I just dont want tmobile to charge my account. Thank you for the advice. I tried to follow some of the posts already on this amazing forum but I wasnt having any luck. I promise I tried to search!
Click to expand...
Click to collapse
Pivo99 said:
Yeh I am having the same exact problem...My screen just stopped working out of no where and now I need to revert back to original rom radio and hspl...anyone got a link or instructions?
Click to expand...
Click to collapse
Download your official stock rom. Extract it to get the nbh file. Rename that nbh to LEOIMG.nbh. Copy it to your SDcard, and flash in bootload mode. This should reverse your HSPL back to spl
10507 said:
Rename that nbh to LEOIMG.nbh. Copy it to your SDcard, and flash in bootload mode. This should reverse your HSPL back to spl
Click to expand...
Click to collapse
This is the part where I am confused. I renamed the file to LEOIMG.nbh but I dont have a clue how to flash it when I am in the bootloader mode.
you not seached for the million and 1 posts about how to return to stock???if its copied right, instead of boot loader it will have LEOIMG to install..search to do it right
Well I formatted my SD card to FAT32 and put the LEOIMG.nbn on the sim card. Boot the phone to the bootloader and it doesn't automatically go to the other screen that is needed to flash the phone.
This is all you have to do..
This is all you have to do:
1. Download HSPL3_PKG, don't ask where, google it!
2. Extract and run as if you were going to flash the HSPL, hit next on first screen, now you get a drop down list, select 2.08.0000 not 2.08.HSPL.
3. Run the program and tarraaaaa.
4. NOw just flash your stock rom the normal way and not from sd since it still didn't work for me after removing HSPL.
fmedrano1977 said:
This is all you have to do:
1. Download HSPL3_PKG, don't ask where, google it!
2. Extract and run as if you were going to flash the HSPL, hit next on first screen, now you get a drop down list, select 2.08.0000 not 2.08.HSPL.
3. Run the program and tarraaaaa.
4. NOw just flash your stock rom the normal way and not from sd since it still didn't work for me after removing HSPL.
Click to expand...
Click to collapse
Here is HSPL3_PKG
Is my HD2 back to stock ?
Hi, after reading loads of posts on this forum I think I managed to put my phone back to stock as I need to return it to HTC.
I had HSPL with some custom rom.
Here are the details from my phone after removing HSPL and Cusrom ROM:
With volume down:
PB81100HX-BC
SPL-1.42.000 XE
MicroP(LED) 0x05
MicroP(Touch) 0x30
Installed rom
RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
I will appreciate if anyone can tell me if this is a Stock HD2.
Thanks !
mario_250r said:
Hi, after reading loads of posts on this forum I think I managed to put my phone back to stock as I need to return it to HTC.
I had HSPL with some custom rom.
Here are the details from my phone after removing HSPL and Cusrom ROM:
With volume down:
PB81100HX-BC
SPL-1.42.000 XE
MicroP(LED) 0x05
MicroP(Touch) 0x30
Installed rom
RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
I will appreciate if anyone can tell me if this is a Stock HD2.
Thanks !
Click to expand...
Click to collapse
Yes you are back to stock
I finally got mine to read :
PB81120 HX-B3
SPL-2.08.0000 8G XE
MicroP(LED)
MicroP(TOUCH)
Is this stock for a tmobile HD2 bought in north america?
GutterFaceMobile said:
I finally got mine to read :
PB81120 HX-B3
SPL-2.08.0000 8G XE
MicroP(LED)
MicroP(TOUCH)
Is this stock for a tmobile HD2 bought in north america?
Click to expand...
Click to collapse
If you have the 3.10 stock ROM then yes that is correct, but if you have the 3.14 stock ROM you need SPL 3.03.0000.
I like the pic for your avatar too by the way.
Help restoring htc hd2 to factory condition after mgldr. Android install
HI, Im new here and im really in need of help restoring my htc hd2 tmobile to factory condition so i can return it for warranty replacement because my screen is not responding at all.
Thanks and more power
This is hat mine shows up.
This is what mine shows up
PB81120 HX-B3
SPL-2.10.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x04
Is this already been restored to stock so i can return it for warranty exchange..I updated the rom from TMobile site 3.14 version..
Thanks so much.
blue_pirate said:
This is what mine shows up
PB81120 HX-B3
SPL-2.10.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x04
Is this already been restored to stock so i can return it for warranty exchange..I updated the rom from TMobile site 3.14 version..
Thanks so much.
Click to expand...
Click to collapse
Yes. All SPL xx.0000 is a stock SPL
T-Macgnolia said that if you have 3.14 rom you need SPL 3.03.0000 to make it a stock version, but mine is SPL-2.10.000 and 3.14 rom, if i return it for warranty exchange are they gonna find out that i hacked it and restored it back?
Thanks
blue_pirate said:
T-Macgnolia said that if you have 3.14 rom you need SPL 3.03.0000 to make it a stock version, but mine is SPL-2.10.000 and 3.14 rom, if i return it for warranty exchange are they gonna find out that i hacked it and restored it back?
Thanks
Click to expand...
Click to collapse
Yea I've mentioned this several times, that the tmous 3.14 doesn't seem to update the spl. Its not a problem because it will run happily on spl 2, unlike regular hd2 which will not run 3.14 on anything less than spl 3.03.
samsamuel said:
Yea I've mentioned this several times, that the tmous 3.14 doesn't seem to update the spl. Its not a problem because it will run happily on spl 2, unlike regular hd2 which will not run 3.14 on anything less than spl 3.03.
Click to expand...
Click to collapse
Thanks so much for the info, im new to HTC HD2 hacking and i really appreciate all the infos and help..
/edit: Got it to work, had to format the SD card from the phone
I've been searching for an answer for this for hours and haven't seen anything here or elsewhere so my apologize if I've missed it (a little bug-eyed now)
I had to replace my HD2 due to the touchscreen no longer working so I'm trying to roll back the phone to its stock status but I cannot for the life of me remove the HSPL. I've followed the instructions and put the RUU_SIGNED.NBH (renamed to LEOIMG.NBH) onto an SD card and started the phone by holding down the volume down button. It boots into the bootloader screen but nothing else from there. Its like it doesn't see the file on the SD card to flash the rom back to the shipped version.
Right now the screen says
PB81120 HX-B3
SPL-2.08 HSPL 8G XE
0x05
CotullaHSPL 0x40
Using the RUU_SIGNED.NBH from this file: RUU_Leo_1_5_TMOUS_2.10.531.0_Radio_Signed_15.34.50.07U_2.08.50.08_2_Ship
What am I missing here?
how did you make it at the end?
Hi Guys
I've been going through the process to try to upgrade to Win 7 but i've hit a bit of a stumbling block and as I'm not very good at this stuff, thought I would ask for advice!
Ok so, I tried to load MAGLDR 112 but that wouldn't load however, I managed to flash 110 from an SD card. So, next step would be to try to "upgrade" this to 112 in prep for WP7.
I have now tried to flash 112 from SD card AND PC RUU but both just "stop". The SD card shows the "Loading..." and then does nothing whilst the RUU shows "0%" and never progresses.
I figured my next step would be to try a stock ROM both via SD card and RUU however, the stock ROM shows exactly the same error.
Any ideas how I can get back to be able to flash NBH's?
Thanks!
usefull(?) info below-
PB81100 HX-BC
SPL-2.08 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x30
MAGLDR v1.10 boots to "Boot menu" but doesn't seem to do much other than allow me to go through the menus - what is MAGLDR?
Monty Burns said:
Hi Guys
I've been going through the process to try to upgrade to Win 7 but i've hit a bit of a stumbling block and as I'm not very good at this stuff, thought I would ask for advice!
Ok so, I tried to load MAGLDR 112 but that wouldn't load however, I managed to flash 110 from an SD card. So, next step would be to try to "upgrade" this to 112 in prep for WP7.
I have now tried to flash 112 from SD card AND PC RUU but both just "stop". The SD card shows the "Loading..." and then does nothing whilst the RUU shows "0%" and never progresses.
I figured my next step would be to try a stock ROM both via SD card and RUU however, the stock ROM shows exactly the same error.
Any ideas how I can get back to be able to flash NBH's?
Thanks!
usefull(?) info below-
PB81100 HX-BC
SPL-2.08 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x30
MAGLDR v1.10 boots to "Boot menu" but doesn't seem to do much other than allow me to go through the menus - what is MAGLDR?
Click to expand...
Click to collapse
I hit a similar problem earlier where on the bootloader it kept on saying NO SD CARD. You may try and follow this solution, I suggested earlier. Click here
The first and third step are quite important. Some others have tried to do it quickly and sometimes it has not worked so give them full consideration.
Let us know if it worked.
Cracked it thanks. Turns out I had put a "normal" SPL on and not the HARDSPL... reflashed with HARD and all working.
Thanks
Monty Burns said:
Cracked it thanks. Turns out I had put a "normal" SPL on and not the HARDSPL... reflashed with HARD and all working.
Thanks
Click to expand...
Click to collapse
Good good. Have fun mate.
Well I've had my HD2 With different android Rom's for about 1 year now I'd say. Recently I've been having a problem where the touchscreen doesn't work at all. Sometimes it works And I can use it Perfectly. I flashed the original Windows 6.5 Rom that I downloaded from the T-mobile website and I wanted to know if that took off HSPL. I want to return it Back Because I have a warranty and I wanted to know if it was ok to return it now. Please Help.
Why don't you just Volumebuttondown and power on and see if HSPL is gone?
I forgot about that. I just did it and it says
PB81120 HX-B3
SPL-2.08.HSPL 8G XE
0x05
0x50
CotullaHSPL
How do I remove HSPL then ?
JDog10 said:
I forgot about that. I just did it and it says
PB81120 HX-B3
SPL-2.08.HSPL 8G XE
0x05
0x50
CotullaHSPL
How do I remove HSPL then ?
Click to expand...
Click to collapse
You need to flash a stock ROM via SD card. This may help, I don't know, or you could also go to MSkip's stickied thread.
By either installing a TMOUS ROM through the sd (rename to LEOIMG.nbh and put on sd then boot) or by using the HSPL package to remove it (install SPL)