hey all,
I was wondering if anyone has tried the combination of MacOS and ASUS services, including myCloud and myNet
I have been successful in using Teamviewer, inside my own home network, and had managed to use SplashTop mac version too, but MyNet service seems more complicated, first I do not know of a service which would let me set up a media server on macOS, so that I can stream files and videos on my transformer. anyone has suggestions?
also, is there a way to use splashtop service from outside of our network?
one last question : how can i click on items when i am using team viewer?
any help is greatly appreciated
Related
the remote desktop client on my vario ii connects to my work desktop perfectly using our office vpn but it is rubbish! the screen doesn't scale well at all or provide any kind of zoom out function.
I have a vnc client which performs much better but it won't connect over the vpn it only works when connected directly to the office network.
forwarding ports is out of the question. so my question is this.
is there a vnc client for pocket pc which will work over vpn or is there a way to make the remote desktop client less rubbish
also are there any apps out there that will let me browse my work network over the vpn. resco doesn't seem to be able to do it even the ftp client won't work.
am I missing something about vpn connections as it seems the only two apps that work over one are activesync and the remote desktop client.
Did you tried to acces domain controler throught the VPN? If yes it is normal that it doesn't work; Domain controler require security enhancement in auth that pocket devices cannot deliver yet. The only way I know is to reduce the security enhancement by using the GPO on the concerned servers; but this is far of being a clean fix.
Just trying to use connect to a vnc server on my workstation. btw our domain controller is the exchange server and active sync works fine
Active sync & exchange do not use the integrate authentification & kerberos; it uses a plain text auth (crypted with the SSL certs), that's why it works. Even if you are on the LAN you will not be able to access your domain's controller shares because of security enhancement.
This is far from solving your issue; but I just wanted to make it clear. Concerning your issue I can't help you at the moment, I still didnt tried the VPN & advanced networking.
btw, good luck
I have set up a vpn on my home computer, no domain, and can't access shares or a vnc server on that either.
Hi Stemill, I seen your other post about the vpn issues with Resco also, I have heard in the past about vpn issues using the [email protected], are you using [email protected] or [email protected]?
I use the terminal/remote client on a daily basis, and it does blow, vj on the board here has made an app that allows fullscreen with the terminal client, and theres a Mocha remote desktop client that supports scaling but no fullscreen, both of which have their own quirks. The scaling makes the text impossible to read when its even at 25%
I have been working on connecting to the remote desktop on mac with vnc, and I've gotten as far as an error on authentification, so I know its possible outside of a home network, but I don't have a clue about buisness situations..exchange or vpn's.
I not even 100% positive about the wap issue, I just seem to remember reading something about it in the past.
Sorry I wasn't of much help, also I kind of have a question for you, I see you mention activesync, you're not activesyncing over an internet connection are you?, I'm working on installing apps that I don't have a .cab for over an internet connection, but the best route I had figured out was to install to a ftp share and then grab the .cab from there with Resco.
Best of luck to you.
Hi there.
I'm on t-mob in the uk. They have a 3g network with full internet access so i'm not using wap at all.
Thanks for the tips about the remote client tweaks. Do you have a link?
I'm using activesync to connect to my works exchange server to sync email and calendar. Pretty sure its not possible to sync over the air to a pc without using exchange. You certainly won't be able to grab remote files via activesync.
If we could figure out how to get apps to work over vpn you could set one up on your pc and (theoretically at least) browse its contents using resco without having to bother with ftp.
If it's not possible to get stuff working over the vpn then you've probably found the best solution already. use ftp or setup a webserver on your pc and host the cab files on that. pocket ie seems to let you install cab files directly from a link.
btw which vnc client are you using on your phone?
Hi, I forget a lot of the time that people here have so many different carriers, sorry.
Here's the link to vj's terminal addon app
http://www.vijay555.com/?Releases:VJFullscreenTSC
And here's the link to the Mocha remote client app
http://www.mochasoft.dk/rd.htm
I used .Net vnc when I was able to get the authentification error
http://www.freewareppc.com/docs/netvncviewer.shtml
I think my problem on the authentification was with the apple remote desktop itself, I read about somethin in the authentification being non standard and sometimes the free vnc viewers don't work..but that was also pc to pc related, the same makers of the Mocha remote desktop also make a vnc client..that was gonna be my next try, I just haven't gotten there yet.
I inistally set up my pc to be able to remote to it from my phone and access aol chatrooms..well mainly one I have hung out in for years, then realized if I set up a server, I could install apps that I couldn't find in .cab form over the net with it, I used to have windows server 2003 set up with IIS(webserver) and the streaming media services, I'm wondering now if the windows streaming media really works with the pocket windows media, and if I could even use it with my gprs/edge connection, I'm still waiting on 3G, suprisingly the remote desktop isn't too bad on gprs/edge.
I'm currently waiting to get a new hard drive before I can really get to work, I'm testing on an old messed up xp install, and half the time I can't even access "my computer" or open folders without it crashin explorer.
I have been searching for clarity thru islands of info in the forums as well as the net. Any help directing me would be sweet. I am trying to use my T-Mobile Wing HTC WM6 to control a computer on my home network. I have somewhat knowledge of having the server and client. Have read and installed programs. I want to be at McDonalds *or any wifi spot and log in to home computer. When I have a VNC server running it says the network ip address of 192.168.1.101 but I assume thats because its thru my network. I have went to what is my ip address.com and tried that with the port the server allows in the vnc viewer and had no luck. I think I might be too newb for such an advanced concept. I am somewhat computer savvy to alot of technical terms. If anyone could help it would be greatly appreciated. I use messengers if faster communication is necessary. Thanks in advance to any help or thoughts.
homiedaclown said:
I have been searching for clarity thru islands of info in the forums as well as the net. Any help directing me would be sweet. I am trying to use my T-Mobile Wing HTC WM6 to control a computer on my home network. I have somewhat knowledge of having the server and client. Have read and installed programs. I want to be at McDonalds *or any wifi spot and log in to home computer. When I have a VNC server running it says the network ip address of 192.168.1.101 but I assume thats because its thru my network. I have went to what is my ip address.com and tried that with the port the server allows in the vnc viewer and had no luck. I think I might be too newb for such an advanced concept. I am somewhat computer savvy to alot of technical terms. If anyone could help it would be greatly appreciated. I use messengers if faster communication is necessary. Thanks in advance to any help or thoughts.
Click to expand...
Click to collapse
a few thoughts,
1. what version of windows are you running. (e.g Xp Home or vista )
as Vista home basic and premium will not accept a remote desktop connection without a 3rd party hack to make it work only business and ultimate support remote desktop
If on XP home be sure to set allowing of remote desktop sessions to be allowed under the system properties area.
2. do you have a password setup on the user account that you log into windows on if no remote desktop will not allow access.
3. when browsing from a 3rd party network ( e.g mcdonalds or over GPRS/HSDPA ) you browse to your external ip not the dark ip of 192.168.1.x i use dyndns.org so i can just browse to the dynamic domain ip which is my external ip of my home pc
4. since you mentioned a dark ip i can only also assume your using a router at home. this means you either use such as LogmeIn/Hamachi and browse to the home pc's Hamachi IP ( e.g 5.5.100.50 ) or you will have to set a port forward in your router to forward any requests from port 3389 to the local IP of the home pc, ( e.g 192.168.1.100 )
I use static ip's in my router at home to ensire that the port forward will always goto my home pc's internal ip address. My particular router from netgear allows to have the ip of a specific machine be assigned the same ip internally based on it's ethernet adapter MAC address. making no changes required on the pc itself other them standard DHCP.
hope this helps.
1. what version of windows are you running. (e.g Xp Home or vista )
as Vista home basic and premium will not accept a remote desktop connection without a 3rd party hack to make it work only business and ultimate support remote desktop
If on XP home be sure to set allowing of remote desktop sessions to be allowed under the system properties area.
1. I am using Windows XP Home. I have allowed Remote Access under the tab Systems Tab.
2. I only have a pw on the prog VNC server on the pc but no passwords for windows *should I? :| ... Then I try VNC Viewer the the Pocket PC *T-mobile Wing.
3. I am reading up on the dyndns.org site. I assume I need the free dns service for those with dynamic IP addresses. *i hope I have that.
4. I have Linksys Bef11s4... I believe I can set static ip's though its tricky for me. I am going to try for the pc I want to connect to. This networking stuff gets a little bit blurry for me. I understand that static means non-changing, therefore the pc to connect to in network will have same ip on restarts and things. I am familiar with the port forwarding options *do i need tcp and udp checked?... again any thoughts definately appreciated...
lastly, Do you have any particular progs you recommend for me to do this concept? I have a few installed, but not sure i need all.. I have pocketputty on pda and wm6 rdc... plus vncvier. On the PC i have VNC CLient and VNC Server *believe I only need server. Thank you for your time Cyberjak
1. Just go to http://www.logmein.com
2. Sign up. It's free.
3. Screw Remote Desktop and juggling internal vs. external IP addresses and DNS.
4. Use/enjoy...no work needed.
MJB
Logmein has like 6 choices... I am looking to remote access outside my network... also is this free? I see trials and stuff... thanks for help mjb
have the logme in installed on main and when i use pda it doesnt work...i installed cab and log in fine but when i go to remote the pc it takes my access code and then pops up with error message for menuPDA.html... i cleared history and cookies and tried to make sense of the forums... I am using the T-mobile Wing with WM6.... wierd... willing to try the other way if needed... i guess i could also try loggin thru a pc not home to the remote pc... i believe i saying this remote term correctly but i believe u understand. I am trying to use my PDA anywhere to control home pc.... thanks for help guys... i am willing to try whatever way works...
I've used Logmein on my MDA Pro, Ameo and now on my Vario 3.
You should first try to remote your PC while your sitting next to it. That way you can see any firewall pop ups that may be blocking you.
I have been trying when i am right next to it... I am using my WM6 to connect wi-fi to the internet thru my network.... the pc i wanna control is on my network...
It doesn't matter what network the PDA and PC are on. Logmein uses an internet connection.
yeah, tried a bunch of things to get logmein to work, and it always comes to the page of "403 Forbidden (0x5) menuPDA.html System error: Access is denied. (5)"
checked their forrums too...
guessing i should try going back to client/server manual entry... either way, any advice from you guys much appreciated.... It seems WM6 are known for incompatibility issues with RDC situations.... hoping not the case but...thanks again guys
got logmein working nicely, thank you for the help guys...
Gooer Remote Desktop Service
I am using Gooer Remote Desktop Service(http://www.gooer.com) and it let me access my home PC using laptop or mobile phone.
remote desktop only works, as far as I know, on XP pro & Vista
http://forum.xda-developers.com/showthread.php?t=357009
Does anybody how i could access my Pocket PC from my PC over the network. I could do it vice versa through Resco but i can't do Pocket PC from PC nor Pocket PC to Pocket PC. Any ideas? I would like it to happen just how the PC does it, with no major add-ons. I don't want to have to deal with VNC, FTP, etc. So if you know, i'd really like to know the answer. Thanks
I was looking for the same thing and haven't been able to find anything.
(I know you said u didn't want to use FTP)
So far the only thing I have been able to find for this is an FTP solution.
http://forum.xda-developers.com/showthread.php?t=351882
I can access the local network from the phone, but apparently there is no SMB server available for Wm6
Why can't you just use the explorer function of ActiveSync?
Jadel said:
Why can't you just use the explorer function of ActiveSync?
Click to expand...
Click to collapse
There are multiple reasons for wanting to access your device from the network. I myself am using multiple machines and would like to drag and drop files from my phone without having to get a bluetooth dongle and install active sync on every one of those machines.
If anyone has setup a smb server for wm6 i'd love to know, also if anyone has any other recommendations for a good ftp server that mocha one doesn't run in the background properly and the bottom toolbar for it stays on my today screen.
Not exactly what you're after, but I've seen a web server for WinMo around somewhere...
Or maybe something along the lines of a VNC client?
Yea, there are reasons for the networking thing. I have several devices on the network and i would life to get a NAS device. I don't want to go to the trouble of setting up ftp/vnc. Mapping the device using Resco works GREAT. For some reason, my laptop can't find my Tilt when i search for devices on the network and i was thinking maybe it was because it didn't have the same workgroup name?
useful for sure
Assuming you're on the LAN with WiFi, what happens when you port-scan your device's IP?
Not sure what you mean by port-scan but when i go to file explorer on my laptop and type \\ip of tilt, it gives me some error. I'm really trying to look into this and most advice is using vnc and another program which i don't want.
kareem9nba said:
Not sure what you mean by port-scan but when i go to file explorer on my laptop and type \\ip of tilt, it gives me some error. I'm really trying to look into this and most advice is using vnc and another program which i don't want.
Click to expand...
Click to collapse
I don't think you're understanding when i said wm6 doesn't have a SMB server running.
Basically, it isn't running the microsoft networking services to access the file shares. You wont get it to work unless you get some sort of SMB daemon(server) for the phone, which to my knowledge doesn't exist.
look up SMB in wikipedia and u will understand what im talking about.
If using Resco to map shares, will you be able to play media (music, movies) over the wlan then, or will it not be fast enough?
I'm assuming that mediaplayer in wm6 won't have a problem playing from shares...or am I wrong?
/Pilot1
I kind of got this resolved. Not the way i really wanted it, but now i use Pocket Controller Enterprise and it does this. Really nice features, i could connect to anybody in the world, just need their host name.
Doesn't the desktop version of total commander do this? The only problem is the desktop version isn't free...
Hi Guys,
I have had a search for this question and I can't seem to find anything.
I was wondering if someone could point me in the right direction to get remote desktop to my home PC from my mobile (Xperia) whilst away from home, I have remote desktop working fine from within my network. If anyone could advise any websites to look or has any guidance on pitfalls etc that would be much appriciated
Thanks
Reb
Microsofts version
http://www.microsoft.com/windowsxp/using/networking/expert/northrup_03may16.mspx
there are other ways.. which require signing up for a dns service that allows you to have static ip etc..
do you have it working outside your network? as in ex: use a laptop from an outside connection to connect to your desktop on your own network? if not, heres what u gotta do: im not gonna be too specific cause u can probably google it for plenty of guides that will be more specific than i can ever be
forward the remote desktop port on your router to your desktop
set up dynamic dns on your router (best company is probably DynDns.org)
have remote desktop software installed on your mobile device
type in your dyndns address and viola.
good luck
New Remote Desktop client from WM6.1
http://forum.xda-developers.com/showthread.php?p=2437139
Have a look at the above link to rdp from your mobile to windows client pc / server
Hi all,
Wondering if anyone has had any luck file sharing / streaming between the Fire and a PC / Mac running SMB / AFP?
Tried to make this happen with "File Expert" off the Android Market but the program didn't seem to pick up on my server though they are on the same Wi-Fi network / LAN and should be able to talk.
Any ideas? Thanks in advance!
I used astro file manager, then dl the smb addon. On my Pc I created a new User account with admin rights, make sure it has a password. Then in astro I just had to enter my pc's ip and the User/pass.
Not sure if you can set up the fire as a host to connect from Pc to the fire though.
CifsManager
Virtual Data Cable
Samba Filesharing
I am using File Expert for SMB transfers to my network without any issues at all. One thing to note is that I never could get it to connect using any machine node IDs, but using IPs, I have absolutely no issues with File Expert's SMB connection.
I use the emit app and server since the codecs are very limited on the fire, it converts in real time and works great locally or remotely
Sent from my Kindle Fire using xda premium
If your Kindle Fire is rooted, there is a program called Samba Filesharing. It will put your Kindle on the local network and you can get to it from your PC via WiFi. For accessing your pc via your WiFi network there are many apps. I use ES File explorer and File Expert.
keithjeffrey said:
Hi all,
Wondering if anyone has had any luck file sharing / streaming between the Fire and a PC / Mac running SMB / AFP?
Tried to make this happen with "File Expert" off the Android Market but the program didn't seem to pick up on my server though they are on the same Wi-Fi network / LAN and should be able to talk.
Any ideas? Thanks in advance!
Click to expand...
Click to collapse
If you're on a Mac running Lion, you are better off turning off File Sharing, downloading MacPorts and installing Samba 3. SMB is sort of b0rked in Lion. I spent days fiddling with it and searching online for help. I finally came across an article about SMB in Lion. That recommended going the MacPorts route.
Sent from my Kindle Fire using xda premium