Database Users

How to set up a WiFi network?

Hi,
I have a WiFi Netgear DG834GT 108 Mbps Router. No problem with internet access...but I would like to share files with my PC. How can I do? What SW should I need on my JJ and hoe to set router and JJ both to get them work?
THX so much for any help!

the easiest way is to use something like Resco File Explorer, an advanced version of the bundled file exploroer in WM5.
It costs about 20 dollars i believe.
Once installed, map your network drive to your home network and it should see it and file transfer will then be possible, as long as your shared folders are correct etc, as per any network

bryson said:
the easiest way is to use something like Resco File Explorer, an advanced version of the bundled file exploroer in WM5.
It costs about 20 dollars i believe.
Once installed, map your network drive to your home network and it should see it and file transfer will then be possible, as long as your shared folders are correct etc, as per any network
Click to expand...
Click to collapse
Thx for your reply,
I just want to use Resco File Explorer plug in called "My Network"...but it doesn't map any drive. I also have tried to change JJ setting in "configure network Adapters/My network card connects to" from "the internet" to "Work", but coming back to RescoExpl. and trying to Map Drive option, it didn't find anything once again.
Please help me with config if you can.
THX a lot!

ok, you have resco file explorer, so open it up, hold your styli on the My Network tab on left, and select map drive. A new window will open as it searches for your home network/pc shared foler etc. if it fails to find it like that, check you 'Hive' PC's name and make sure you have a folder selected to Share. Try that and let me know. (PS make sure wifi is on first on both exec and router!)

Thank you very much I DID IT!
:lol:

Well Done!!! Thats great glad to help, now enjoy streaming your music and videos to your exec whilst in the bath/garden/sofa!!

My good friend...
can you help me to let my JasJar print via WiFi??? In other words, is it possible to launch a print from JasJar via WiFi, by shareing my PC printer?
Am I asking too much?
:wink: :wink: :wink:

Hey hey!
aha! The only way i have ever done it unfortunatley is through terminal services client. So, open say, a word document from either your server PC or on your pocket PC, and save back to the shared on your desktop on your server PC and then via Terminal Services remote desktop and open the doc from your JJ screen and send to print from you server PC!
Long winded I know, anyone else got a better solution?
Hope that helps!

Uhm..I still have not tried your solution...but do you think there is any third party software that can do it, simply shareing printer via WiFi?

ill have a look, never really had a need myself, but ill have a look around, might be a good thing! Ill post if i find anything ok

Ok, thx...I'll take a look around too. I thought it would be useful for example if you receive an email on jasjar and you should print it to have it like a document...without further steps, directly from JJ...

HP has printer drivers for PPC!
They even support some Canon printers..

uhm..I have found Print Pocket CE, but it doesn't support WM2005 Office files, and PrintBoy...but I don't' know if it is compatible...
Any suggestion?

Streaming over internet.

Is it possible to access my files / shares over the internet ? Whats the best program to use ? Are there any programs like RealVNC that offer file access options as well as remote control options ? If preferable something with a password that I can save on my wizard so I dont have to keep typing it in all the time.
I have wifi at work so want to be able to access my files that are at home while I am in work like my mp3's. Would they stream ok ?

I think you can stream your mp3s to your wizard if you run slimserver from slimdevices on your home pc and a client on your wizard (though I haven't tried it myself) - take a look at the forums on their website.
Chris

Actually is it streaming ? I just want access to my files, is that one in the same thing ?

Sorry, this is an app which (in effect) enables you to stream (ie play) a music file on your home pc (running slimserver) and listen to it remotely on a client device (e.g. your pda). It doesn't allow you to pick up the music file itself over the internet.
Chris

I can access the shares on my home PC over WiFI using Total Commander but I cant seem to play music directly. I have to copy it across first. It gives a funny error message in WMP if I try to stream it. I will post the error message later.

knowsleyroader said:
Is it possible to access my files / shares over the internet ? Whats the best program to use ? Are there any programs like RealVNC that offer file access options as well as remote control options ? If preferable something with a password that I can save on my wizard so I dont have to keep typing it in all the time.
I have wifi at work so want to be able to access my files that are at home while I am in work like my mp3's. Would they stream ok ?
Click to expand...
Click to collapse
You would need a Static IP address on your Home broadband connection to do this, not many home broadband packages give you a static IP just a dynamic address that changes at whim.
Presuming you have a static IP you could then get yourself a DAMN good firewall and install Microsoft IIS on your PC to make it a webserver, then get yourself a domain name and point it at your PC. (slightly simplified example above there, but I'm sure you get the drift)
There are probably apps around to do this much sipler but you'd need to google for them. pretty sure that there is a specific version of VNC and PC anywhere that will do what you want

knowsleyroader said:
Is it possible to access my files / shares over the internet ? Whats the best program to use ? Are there any programs like RealVNC that offer file access options as well as remote control options ? If preferable something with a password that I can save on my wizard so I dont have to keep typing it in all the time.
I have wifi at work so want to be able to access my files that are at home while I am in work like my mp3's. Would they stream ok ?
Click to expand...
Click to collapse
You would need a Static IP address on your Home broadband connection to do this, not many home broadband packages give you a static IP just a dynamic address that changes at whim.
Presuming you have a static IP you could then get yourself a DAMN good firewall and install Microsoft IIS on your PC to make it a webserver, then get yourself a domain name and point it at your PC. (slightly simplified example above there, but I'm sure you get the drift)
There are probably apps around to do this much sipler but you'd need to google for them. pretty sure that there is a specific version of VNC and PC anywhere that will do what you want

wilesd said:
knowsleyroader said:
Is it possible to access my files / shares over the internet ? Whats the best program to use ? Are there any programs like RealVNC that offer file access options as well as remote control options ? If preferable something with a password that I can save on my wizard so I dont have to keep typing it in all the time.
I have wifi at work so want to be able to access my files that are at home while I am in work like my mp3's. Would they stream ok ?
Click to expand...
Click to collapse
You would need a Static IP address on your Home broadband connection to do this, not many home broadband packages give you a static IP just a dynamic address that changes at whim.
Presuming you have a static IP you could then get yourself a DAMN good firewall and install Microsoft IIS on your PC to make it a webserver, then get yourself a domain name and point it at your PC. (slightly simplified example above there, but I'm sure you get the drift)
There are probably apps around to do this much sipler but you'd need to google for them. pretty sure that there is a specific version of VNC and PC anywhere that will do what you want
Click to expand...
Click to collapse
Well I could always just take a note of my pc ip address and as my pc is on a lot of the time it can remain the same for some time. Yeah I thought VNC could do something like that but there doesnt seem to be any option for it.

Static IP, pah!
www.dyndns.org (or many others) give your dynamic IP a static DNS name eg yourname.dyndns.org and then all you need to do is:
1) Manually update your IP
OR
2) Configure your router to update you IP (available on some routers)
OR
3) Get some software to update your IP (lots available, use google)
Now your home network has a static name to access it for any purpose - just change the port on the end
I have web on 80, ftp on 21 and a socks proxy all running - just need to forward the ports on the router

You need ORB!
I use it and can acces all my photo's, MP3's and even movies that are on my home-pc streaming over internet. It works even with GPRS, but with WIFI it works really great.
See www.orb.com

rmg said:
I can access the shares on my home PC over WiFI using Total Commander but I cant seem to play music directly. I have to copy it across first. It gives a funny error message in WMP if I try to stream it. I will post the error message later.
Click to expand...
Click to collapse
I get the same; use TCPMP and it works fine

N!co said:
You need ORB!
I use it and can acces all my photo's, MP3's and even movies that are on my home-pc streaming over internet. It works even with GPRS, but with WIFI it works really great.
See www.orb.com
Click to expand...
Click to collapse
Isnt there some way of doing it with resco and your ip address ? maybe opening a really obscure port on the router and firewall ? Not sure how those companies work but im a little concerned about my data going through their servers which I presume it is ?
Would just be so much simpler if there was some way of doing it with resco like I do on my home wifi.

Help Sharing files between 2 Wizards

I have a wireless router and have managed to set up my Home PC and my Wizard so i can browse shared folders on my PC from my wizard. My wife has recently aquired a wizard also and I am trying to set it up so we can share files between the two wizards by mapping/sharing folders on each device.
I have resco explorer on both devices but if I try to map a location on her device from within resco, i can see her device name, but i cant get access to a folder by typing "\\her_name\My Documents" for example.
Anyone got any idea's where i'm going wrong??
Is there a way to share certain files or will it just work on a PPC?

Obviously you are both in the house at the same time to do this.
Why not just do it directly?

I don't think the wizard has a samba server on it, it's only a client. you can share files fast over a PC or, if they're small, by bluetooth!

Hi, thanks for your responses, but i'm not trying to connect them directly to each other. I mean via the wireless router, the router is set up as a gateway.
It is possible to actually see each others devices in the "map network drive" window of resco explorer, but it tells me i "dont have permission or it cant find the network resource" if i try to map a folder on the pocket pc.
It would seem as though i'm just a step away from solving this but i'm not an expert at networking.
Sorry if i didn't explain myself properly in the first message. :wink:
EDIT: I know it could be done by bluetooth, but i was just wondering if it was possible

like i said, i don't think WM has an integrated Samba Server, only a client. you can only connect to network resources, not host files etc.

This topic reads so much better if you imagine it as being 2 actual wizards sharing nail files :lol:
Off topic I know but I couldn't resist :wink:

Sorry - I looked at it from a practical perspective, not as a challenge or theoretical project.

GaZ said:
This topic reads so much better if you imagine it as being 2 actual wizards sharing nail files :lol:
Off topic I know but I couldn't resist :wink:
Click to expand...
Click to collapse
How stupid!
Clearly they were in prison - and their wives just sent a cake! :lol:

HTC WM6 as member of Windows LAN workgroup via WIFI

I have a new AT&T Tilt and I've just installed a WIFI access point on my home/office LAN. My WIFI laptop was simple to configure as member of the Windows WORKGROUP. I've been struggling with my TILT. Some questions:
1) Is this supposed to work?
2) How do you assign the TILT to a workgroup?
3) I can see other workgroup PCs from the TILT, but I cannot see the TILT from other PCs. I am able to ping the TILT from a PC both by ip address and by device name (which happens to be "tilt").
Thanks for any help,

From what I understand you want to be able to browse phone files over wifi?

Yes. On any LAN PC, I would like to click on "My Network Places" and see the WM6-Phone listed with the other WORKGROUP computers. Then I would like to be to click on it to browse its directorys. And also drag & drop files to/from the phone. Thanks.

comet270 said:
Yes. On any LAN PC, I would like to click on "My Network Places" and see the WM6-Phone listed with the other WORKGROUP computers. Then I would like to be to click on it to browse its directorys. And also drag & drop files to/from the phone. Thanks.
Click to expand...
Click to collapse
Not sure that's going to work unless you can find some other way of connecting other than by using Activesync

I understand the "Not sure that's going to work..." part. I don't follow the "unless you can find some other way...". I'm not using Activesync (at the moment) I wish to use a WIFI Access Point to join a LAN WorkGroup. I call that "some other way". It would seem that this desire would be widely shared by the wider community of users. It's a logical thing to want to do. There are enough parameters to tweek that given the proper expertise, I would guess that you could connect anything to anything else. I just don't have the expertise so I thought I would pose the question...

As far as i know, windows mobile doesn't include a smb (file) server. You have only a client. This means that you can browse your desktops' shares from the phone but not the contrary.
Windows CE 5.0 and 6.0 actually have a smb server but i think this is not shipped with the Mobile variant.
Unless you find some 3rd party software of course (i don't know of any but i've never really looked for it).
Bye
EDIT: if you want to be able to share files in the PPC with the desktops in the network, you can install a FTP server in your PPC. Then you can use a ftp client on the desktop to browse the PPC.
Try this one: http://www.mochasoft.dk/freeware/ftpd.htm

Nice solution. Thank you.

Seeing LAN shares with Tilt
I have the same goal (to share both ways between Tilt and LAN), but some additional issues.Have had the Tilt for only one day, so forgive me for any dumb questions!.
Can't even see the LAN shares from the tilt (nor the other way around). The phone indicates it is connected to our WiFI, and other LAN PCs can see another's share \\Titan for eg., but when I type //Titan into the Tilt browser it says it can't connect to that. Any suggestions why?
I wondered if its a syntax problem. Seems the Tilt does not have a reverse slash (\), but I would think forward slash (/) should work equally well.
In some circumstances, the phone invites logging into a VPN, but we dont have one established on our LAN. Would this facilitate sharing files? Does setting one up require running a server or is a simple Peer to Peer network sufficient? If so, how do you set one up?
Once I am sure I hve a Wifi connection I will try the ftp client solution.
Any suggestions welcomed.
Thanks
Trekker451

Access PPC from PC via WIFI

Hi,
Is it possible for my WM6.1 device to join my LAN Workgroup such that I can view the files on my PPC from my desktop computer and drag and drop files over to the PPC via WIFI? Kind of like using the PPC as a NAS device?
Thanks in advance
Rob

Yes and No
To my knowledge no. i believe that microsoft stopped allowing that feature within active sync quite awhile ago, but what i have managed to do is to create a computer to computer network (ad-hoc) where my PDA was the access point and my laptop could then connect to that.
I could transfer files using explorer on my phone to access my network drives on the laptop, then copy and paste from there, but i could not find my phone on the laptop due to it not having shared folders to my knowledge.
The things i would like to achieve is shared internet over wifi by using the phone as an access point and to figure out how to access files on phone on the laptop. Not the other way round.
When i created this computer to computer network i thought that if i had 3G connected it would automatically pick up the connection on the laptop but i was wrong.
Which means i am no expert on the matter, but im sure there is a way

the same rules goes for pda's on the same net as for other computers
if they got the correct rights to access shared dirs
it can access them and map them if one use programs like total commander
and know a bit about network in generals not really that user friendly i guess

It can be done, I use a program called WMFTP. Google it.

Yea i get some of it
Rudegar said:
the same rules goes for pda's on the same net as for other computers
if they got the correct rights to access shared dirs
it can access them and map them if one use programs like total commander
and know a bit about network in generals not really that user friendly i guess
Click to expand...
Click to collapse
Some of it i get but others bits i dont. Like is it possible to set sharing rights to directory's on the phone? If that is possible great.
Also how do you find out the device name or would you have to use the ip address for mapping those directory's?
I have a touch diamond and would love to map the internal storage on my network, but have failed at that.
Still not figured how to share the internet connection of the phone over wifi either