Database Users

How to i change to other ROM?

Currently using HTC HD 2 Andriod rom running on nand,
Assuming Ive installed andriod with clockwork recovery and etc, and I would like change my ROM to other versions, how can I do it?
Do I need to delete the current Andriod Rom? and how do i do it? thanks!

Go to Clockwork Recovery.
If your coming from another rom (Miui -> CM7, Sense -> Stock, or any of that matter), wipe cache recommended 3 times, advanced -> Dalvik Cache. When your coming from another rom, it's highly recommended to wipe data too.
If your coming from the same rom (CM7 -> CM7) and want to KEEP your data, then simply wiping cache and Dalvik cache is enough.
To flash a new rom, choose "apply zip from sd card" -> "choose zip from sd card" and simply select the .zip file.
You don't need to delete or anything, Clockwork should overwrite it and your cache should be cleared.

I always do a Nandroid backup using backup and restore in CWM and then do a full wipe of all the partitions data, system, boot, cache, and sd-ext. Then I go to advanced in CWM and woe my Delvik cache, then flash my ROM using install zip from sdcard. When my ROM is done I go to backup and restore and select advanced restore and restore my data and my cache from my Nandroid backup then boot my HD2. I never once have had a issue with any new ROM or my information and settings not being there. You do not want to restore boot or system cause boot is the kernel of your ROM and system is the ROM itself. So if you restored them you still havecthe same ROM.

check ROM thread / instructions, there are a lot of information.
sometimes you need to follow exactly as it says.
cheers

I am switching over from wp7 to an android. do I need to install a wp 6.5 first or can I install go ahead and switch over straigh from wp7?

yahya.haqiqi said:
I am switching over from wp7 to an android. do I need to install a wp 6.5 first or can I install go ahead and switch over straigh from wp7?
Click to expand...
Click to collapse
I recommend running a Task 29cand then reflashing MAGLDR and then flash CWM using USB Flasher in MAGLDR then flash your ROM using CWM. Make sure to reformat your SD card before booting up your Android. Easiest way of doing this is to stick your SD card in a adaptor and then into a digital camera then format it with the camera as this will take the funky format that WP7 does to it off. Then use a USB card reader to format it using Fat 32.

just flash android using instructions from your ROM thread.
cheers

yahya.haqiqi said:
I am switching over from wp7 to an android. do I need to install a wp 6.5 first or can I install go ahead and switch over straigh from wp7?
Click to expand...
Click to collapse
Ha I figured I had given you way over kill instructions lol. Go to the link below and try the steps in this guide I just found in the HD2 Windows Phone 7 Q&A General section.
http://forum.xda-developers.com/showthread.php?t=1039655

T-Macgnolia said:
Ha I figured I had given you way over kill instructions lol. Go to the link below and try the steps in this guide I just found in the HD2 Windows Phone 7 Q&A General section.
http://forum.xda-developers.com/showthread.php?t=1039655
Click to expand...
Click to collapse
Thanks man that was super helpful

Nand Android not booting thru cwm Recovery

Hey,
I tried installing Android using cwm rec., everything goes well, but the android does not boot, it gets stuck on the booting screen, i tried several time, diff roms, still no results, can any one help me if im missing something? :S

make sure you are removing any leftover stuff from a previous rom on the SD card.
So in CWM, before you go to flash the rom, do a 'wipe data/factory reset' which should clear out the ext partition and the .androidsecure (or whatever its called) folder on the FAT32 partition.

I have done that, but it wont work, i've cleared cache too,
Btw how much time does it take on the first boot?

dont know, sorry, i've never used a sense rom, but i've seen posts referring to a good ten minutes or more, depending on the sd card and teh rom being installed, and how much stuff is moved to sd. Some roms just put just the app and dalvik folders there, some put much much more.
If it were me, i recon id be pulling teh battery at 10 mins.

do you have a 1gb partition on your sd card?
is the partition information for the rom correct?
are you using magldr or clk?

I have Tried wit a 2GB and a 1GB partition, I have Magldr 1.13, The Cwm size is also correct, 400mb for a 300mb rom.

amigo max said:
I have Tried wit a 2GB and a 1GB partition, I have Magldr 1.13, The Cwm size is also correct, 400mb for a 300mb rom.
Click to expand...
Click to collapse
You're absolutely sure the ROM you're trying to use is correct for the type of Android bootloader you have? (clk/magldr)
Did you check the MD5 sum of the rom.zip you downloaded? Maybe you got a bad download.
Did you wipe EVERYTHING? (full wipe, then in advanced, wipe dalvik and cache)
What method did you use to partition your sd card?

For now i Have followed the exact instructions from the DHD Desire rom, and it seems to work, I think the problem was wit the CWM recovery, I downloaded it from the Rom's page and it worked.

When I tried installing another Rom, I encountered the same prob, so I installed recovery again and it worked. Do I have to keep changing the recovery every time I put another Rom?
Sent from my HTC HD2 using XDA App

Yeah, some roms require different partition layouts, which are made when you flash CWM recovery.
If you are going from one rom to another and they both require the same partition layout, or if the new rom you're flashing requires a smaller system partition than your current rom, then you won't have to re-flash CWM. In that case, you'd just have to do a full wipe and then flash ur new rom.
The required/recommended CWM partition size is usually somewhere in the first few posts of the thread you download the rom from.
Sent from my HTC HD2 using XDA App

Cannot flash any ROM's

Hello, I have recently been unable to flash ROM's succesfully.
I have Clockwork MOD 4.0.0.2 installed as it came with CF-Root, and I am on stock 2.3.5 KI3.
I have tried flashing several roms, and while it says install complete, whenever it restarts, it is on a boot loop, where it won't go past the Galaxy S II bit with the yellow triangle, I have to flash the stock rom again using odin to even use the phone, I have tried to flash other recovery versions, like 4.0.0.14 and 5.1.2.6 (I think it is) but they all come up with errors mounting or getting recovery.log or something, could you please help?

Did you try to do a full wipe?
Most issues can be resolved by this.
In the CWM menu chose the factory reset/full wipe. (Don't worry it won't touch your files on the internal SD card)
Do a cache wipe and in the advanced menu do a dalvik cache wipe.
Some recommend to do this procedure twice, but you should be settled with doing it once
Let me know if it helped?

theMartyMcfly said:
Did you try to do a full wipe?
Most issues can be resolved by this.
In the CWM menu chose the factory reset/full wipe. (Don't worry it won't touch your files on the internal SD card)
Do a cache wipe and in the advanced menu do a dalvik cache wipe.
Some recommend to do this procedure twice, but you should be settled with doing it once
Let me know if it helped?
Click to expand...
Click to collapse
Yeah I did all that, didn't help, the progress bar gets half way and says complete :S I have downloaded the ROMs several times aswell incase they were corrupt, still didn't help.

Take out the battery, wait a bit, put it back in. Do all the wipe and formatting procedures (perhaps twice) and format the internal sd card as well and wipe the battery stats (just to be sure)
Sent from my GT-I9100 using XDA App

Backup EFS folder 1st....

ultramag69 said:
Backup EFS folder 1st....
Click to expand...
Click to collapse
That's probably not a bad idea.
Here's how:
http://forum.xda-developers.com/showthread.php?t=1068193

[Q] I can't restore my cwm backup, what should I do? [urgent,please help]

Hi,
I had a problem with my NDT miui nand buil recently, it was sticking on boot animation, so I made a backup via cwm, I saved the backup folder on my pc. Now I want to restore that backup. I tried all the usual methods for it, I did tas29, flashed new clk, and tried backup, still stuck on boot animation, I flashed my last rom and then tried to restore the backup, again stuck on boot animation. I did everything for it, but doesn't works for me. It does the restore process as usual, but I wan't to boot, my phone stuck in boot animation. So I beg you to help me with one of these alternatives, please.
-I only want to restore my contacts, call logs and sms. Anyway to restore them only? there are some .img files in backup folder, which one are these files stored?
-Is there anyway I can extract backups files on my pc and get my contacts,sms,... in it?
-If none of above works, is there anyway to install cwm on pc android emulator, and then restore my backup in it, and again get my contacts,sms there?
I will really be thankful of your helps

behnam2016 said:
Hi,
I had a problem with my NDT miui nand buil recently, it was sticking on boot animation, so I made a backup via cwm, I saved the backup folder on my pc. Now I want to restore that backup. I tried all the usual methods for it, I did tas29, flashed new clk, and tried backup, still stuck on boot animation, I flashed my last rom and then tried to restore the backup, again stuck on boot animation. I did everything for it, but doesn't works for me. It does the restore process as usual, but I wan't to boot, my phone stuck in boot animation. So I beg you to help me with one of these alternatives, please.
-I only want to restore my contacts, call logs and sms. Anyway to restore them only? there are some .img files in backup folder, which one are these files stored?
-Is there anyway I can extract backups files on my pc and get my contacts,sms,... in it?
-If none of above works, is there anyway to install cwm on pc android emulator, and then restore my backup in it, and again get my contacts,sms there?
I will really be thankful of your helps
Click to expand...
Click to collapse
Are you using the correct partition size? Too small a partition normally causes the phone to hang at the bootanimation. If you have used the correct partition size and it still doesn't boot, try simply increasing it to account for any bad blocks you may have.
It's also possible that your backup is corrupted somehow, it happened to me once. If this is the case, try flashing the same ROM and then restoring the data partition in CWM.

When you rename backup file do not use spaces (exp. icsromv3)
Sent from my E15i using xda premium

2010matej said:
When you rename backup file do not use spaces (exp. icsromv3)
Sent from my E15i using xda premium
Click to expand...
Click to collapse
I don't think that's the problem because if the ROM gets up to the bootanimation (after a Task29) then it's clearly been [somewhat] flashed correctly so it's probably down to the backup itself, or of course an error somewhere on his part.

behnam2016 said:
... it was sticking on boot animation, so I made a backup via cwm, ...
Click to expand...
Click to collapse
Come on guys, this is common sense. If he made the backup with the rom ALREADY not booting up, no matter what he does, it'll always stick to the boot animation.
The back-up saves your ROM at its current state, not the one it was working at before. Backups should only be done when your ROM is actually fully functioning, not when it is broken. So unfortunately, you have to do what Nigel Suggested. Make a clean install of that ROM and then only restore the data partition.
You may be able to do the emulator thingy, but I'm not sure, you can give it a shot though.

For extracting something from your backup see appextractor or nandroid browser

Marvlesz said:
Come on guys, this is common sense. If he made the backup with the rom ALREADY not booting up, no matter what he does, it'll always stick to the boot animation.
The back-up saves your ROM at its current state, not the one it was working at before. Backups should only be done when your ROM is actually fully functioning, not when it is broken. So unfortunately, you have to do what Nigel Suggested. Make a clean install of that ROM and then only restore the data partition.
You may be able to do the emulator thingy, but I'm not sure, you can give it a shot though.
Click to expand...
Click to collapse
Whoops, I should have read the OP more carefully
@OP Yeah, just fresh install then restore the data partition. I still don't understand why the other ROM isn't working though unless it's your fault somwhere

[TPT] CM10 Cannot wipe cache

Hi everyone, I recently rooted my 16GB WE TPT and installed cm10 v.0.8.1 and I love the performance and everything, if only there were no reboots. After reading in this forum I wanted to try to reinstall things from scratch wiping everything. For some reason I don't seem to be able to to anything with the data that is on my TPT. Neither can I do a factory reset from settings nor can I wipe data from Recovery. It doesn't display an error but it just doesn't delete anything. Then I tried to restore my backup from my original rom but this doesn't work either: it says error while restoring data (after recovery and system).
Can anyone help me? Could I have accidentally locked the data or anything?
Btw, Google Play has stopped working after my last try to restore stock and then install cm10 again.

In cwm you find under advanced a setting called "fix permissions". Try that

emuandco said:
In cwm you find under advanced a setting called "fix permissions". Try that
Click to expand...
Click to collapse
Doesn't do anything.

idewis said:
Doesn't do anything.
Click to expand...
Click to collapse
Hi, i had big problems with my Data-Partition. The Partition was read-only. No wipe with CWM was possible. Is that the same problem what you have? Do you have an logcat? Any error-messages?
Wiping was only possible with adb...
Here is my post: http://forum.xda-developers.com/showthread.php?t=1944759
When it is the same problem, it exist an solution...
Greetings

tpauli said:
Hi, i had big problems with my Data-Partition. The Partition was read-only. No wipe with CWM was possible. Is that the same problem what you have? Do you have an logcat? Any error-messages?
Wiping was only possible with adb...
Here is my post: http://forum.xda-developers.com/showthread.php?t=1944759
When it is the same problem, it exist an solution...
Greetings
Click to expand...
Click to collapse
I don't have the same error messages you have/had, but I could image that my data partition is also read only since I can neither delete or install anything. What did you do to get rid of that problem?

The solution was to completely format the data permission. This can't be done in CWM directly because CWM tries to keep the folder /data/media, which is your internal sd-card and only deletes the other files (That's obviously not formating). In the link you can find a zip files that you can "flash" in CWM, it will format the data partition and does nothing else. After using it you should also manually wipe the cache using CWM.
Like i said, this will include your internal sdcard! Make backups first if you have important data stored on it!
http://ubuntuone.com/4zKT1jqeqhR8qdGh2y4TaM

I need to clear it - if I do "wipe data/factory reset" in stock ICS recovery menu - will it cause deleting ROM (and reboot will make brick) OR just will get it back to clean factory ROM?
I found few threads here about "wipe data"-thing, but it seems to me, that every version of Android / custom ROM / recovery type could behave different.