Hi guys
I installed JPM around two weeks ago and now my Home key doesn't work most of the times. I have to press it around 4 or 5 times to turn on the screen and sometimes it works properly. What might be the problem? Anyone else having the same issues?
But before taking it to the service center, flash the ROM that had come preloaded in the device/the ROM available for your country, or they'll say that the warranty is void as u flashed a different ROM.
ok guys will try it thanks for the reply
check your kernel!
It works for me!
i only have the stock kernel installed.
my phone is i5801 so might the prob be because i installed 5800 firmware?
Happened with me
Wiped data and cache from recovery and solved
Do try!
Related
Dear all,
I bought my wife a Galaxy y from t-mobile. I noticed when I locked the device via the button on the right and put the device in standby, I cannot wake up the phone by pressing the home button and get the screen to unlock the device by wiping. Only when I press the home button fot long time and sometimes twice for a long time, I manage to get the unlock screen. Very annoying. And when I do this, the sd card has to be remounted every time. Does anyone have had similar issues? Phone is on GB2.3.5 with LA2 rom if i'm correct. LH2 is the new release.
There's a software update available via Kies, but is not installed yet. Could it solve the issue? I hope someone can help. Thanks
Update the device, maybe the problem is due to update............
Did you check your lockscreen settings? Check there, you may put long press option there. Btw are you on stock rom or custom rom?
Sent from my GT-S5360 using xda premium
You've got quite a strange problem man! Maybe some glitch with your framework-res.apk. Do a full wipe (data & cache), and see if it resolves the problem. If it dosen't then flash the latest stock firmware.
Thanks for all responses. I was on Kernel LC1 and now after the update on LH1. But more important is that the issue is solved. Now home button works fine and no strange messages about memory card anymore. So I'm happy now...or better my wife
Hey xda.
Today when I rebooted my phone it sayed that I needed my puc code to unlock my phone... When I just pressed enter the phone unlocked... After that my home button won't work and I don't have a network connection anymore...
Is this a broken simcard or do I need to update my rom.. If I need to update my rom wich one should I take?
Edit: when I press the home button. The home button + the
Back button fade away for a moment.
Sorry for the bad English
Greets Tunestwo
Tunestwo said:
Hey xda.
Today when I rebooted my phone it sayed that I needed my puc code to unlock my phone... When I just pressed enter the phone unlocked... After that my home button won't work and I don't have a network connection anymore...
Is this a broken simcard or do I need to update my rom.. If I need to update my rom wich one should I take?
Edit: when I press the home button. The home button + the
Back button fade away for a moment.
Sorry for the bad English
Greets Tunestwo
Click to expand...
Click to collapse
If it worked with the ROM some days ago, maybe a Cache and Dalvik Cache Wipe should do it.
Else: Im using Stock with Linaro Franco Kernel, it does a great Job at all. Isn't there an official Version of Cyanogenmod?
Cheers, ShockBuddy
ShockBuddy said:
If it worked with the ROM some days ago, maybe a Cache and Dalvik Cache Wipe should do it.
Else: Im using Stock with Linaro Franco Kernel, it does a great Job at all. Isn't there an official Version of Cyanogenmod?
Cheers, ShockBuddy
Click to expand...
Click to collapse
Yes there is a Official version of Cm10.2
@Tunestwo
Home button not working and not having signal are two different thing.. Check if you sim is properly cut,or ask your service provider to give you a micro sim.
Try some launcher for home button.. Was it working previously on te same build? If yes try a reboot..
Wiped cashe and dalvik cashe, that fixed the issue... pretty wierd since im running this for about a year now.
Hey there
A friend of mine has the following problem with his Note 3 (completely stock).
Since the latest 4.4.2 OTA update, sometimes suddenly the screen does not respond to touching it with your hand. It does react to the stylus.
Locking and unlocking the screen does the job, but only for a few minutes.
I wiped the phone via stock recovery, but the problem persists.
Anyone with the same problem, or maybe a clue?
Thanks!
GT-i9300, CM11, Boeffla
joriswagter said:
Hey there
A friend of mine has the following problem with his Note 3 (completely stock).
Since the latest 4.4.2 OTA update, sometimes suddenly the screen does not respond to touching it with your hand. It does react to the stylus.
Locking and unlocking the screen does the job, but only for a few minutes.
I wiped the phone via stock recovery, but the problem persists.
Anyone with the same problem, or maybe a clue?
Thanks!
GT-i9300, CM11, Boeffla
Click to expand...
Click to collapse
Hi
Same problem here,I tried several 4.4.2 official and custom roms but not fixed and I tried these too:
I tried mega wipe and last rom in samfirmware!
I removed my external sd card
And I googled and found there are others with same problem so it shouldn't be hardware problem
p.s.When screen freezes just half of it works! And just doesn't work by fingers and it works by s_pen!
There no way to come back to 4.3 too
What should I do?
Ty in advance
Finally Solved!
Hi
I had same problem
I did everything u said like:
mega wipe and changing rom
custom roms
taking out battery when it's on ( I Did this but I don't know It had any effects on my phone or not!)
taking out external card
But I still Had the Problem
Solution:
But I had a flip cover and I separated that from phone and thanks God,surprisingly It's Fixed and it works like a charm!!! after that I used my original cover and there is no problem till now.
Good Luck
Had the same issue posted it here bit no one responded.
Solution: The flip case I had..there's a problem with it where it locks the screen even when the case is not closed. But lately I had no issue it just seem to gotten fixed by itself.
Sent from my SM-N9005 using XDA Premium 4 mobile app
Before some weeks ive been asking here what ROM I should use. Ive done this cause my power drains to fast.
So I switched back to OxygenOS3.0 and everything worked fine until today.
Today my phone got always authentification problems with my WiFi at Home.
So ive thought to fully unroot my device and go back on the first stock ROM.
But it fixed nothing and I also restart my router so thats not the fault.
Also the Fingerprint Sensor including the Touch Function doesnt work anymore ive also got this problem before a half year but fixed it very fast after installing CM13.
Now ive wanted to know if someone got the same problems or one of them and could help or give some advices the phone is only 1 year old and I didnt want to swap to another one until a year.
What I would do is flash some other roms and make sure that you're using the hybrid twrp
Or probably start over again after flashing stock ROM.
Before that try clearing cache and Dalvik which solves issues on most deodexed ROMs.
Hey guys, I have some problems with my s4 and hoping you could fix these. I'll try my best to include details of what I did and any details that are missing that I will include
Started with me trying to install lineage ROM on my s4 when things started to grease up.
Ok the problem is the phone would not boot to the main OS but when it did I flashed the recovery(twrp)with odin which seemed to work for about a minute or two before powering off. Also I couldn't get to the recovery(twrp) even when pressing the correct combos I just flashed it again and again until it worked but wouldn't work sometimes. I went back to the stock ROM which didn't work either.
I know I am missing out on a few details but if any of you guys can help me that would be great.
partition error ?
Crooton said:
Hey guys, I have some problems with my s4 and hoping you could fix these. I'll try my best to include details of what I did and any details that are missing that I will include
Started with me trying to install lineage ROM on my s4 when things started to grease up.
Ok the problem is the phone would not boot to the main OS but when it did I flashed the recovery(twrp)with odin which seemed to work for about a minute or two before powering off. Also I couldn't get to the recovery(twrp) even when pressing the correct combos I just flashed it again and again until it worked but wouldn't work sometimes. I went back to the stock ROM which didn't work either.
I know I am missing out on a few details but if any of you guys can help me that would be great.
Click to expand...
Click to collapse
try this, have problem like that, but i cant use any os greather than kitkat
but make sure you DUMP your partition that mentioned ! to PC
https://forum.xda-developers.com/galaxy-s4/help/battery-disconnect-upgrade-os-t4005567