Home button not reacting when device is locked - Galaxy Y GT-S5360 and Duos 6102 Q&A, Help & Troubl

Dear all,
I bought my wife a Galaxy y from t-mobile. I noticed when I locked the device via the button on the right and put the device in standby, I cannot wake up the phone by pressing the home button and get the screen to unlock the device by wiping. Only when I press the home button fot long time and sometimes twice for a long time, I manage to get the unlock screen. Very annoying. And when I do this, the sd card has to be remounted every time. Does anyone have had similar issues? Phone is on GB2.3.5 with LA2 rom if i'm correct. LH2 is the new release.
There's a software update available via Kies, but is not installed yet. Could it solve the issue? I hope someone can help. Thanks

Update the device, maybe the problem is due to update............

Did you check your lockscreen settings? Check there, you may put long press option there. Btw are you on stock rom or custom rom?
Sent from my GT-S5360 using xda premium

You've got quite a strange problem man! Maybe some glitch with your framework-res.apk. Do a full wipe (data & cache), and see if it resolves the problem. If it dosen't then flash the latest stock firmware.

Thanks for all responses. I was on Kernel LC1 and now after the update on LH1. But more important is that the issue is solved. Now home button works fine and no strange messages about memory card anymore. So I'm happy now...or better my wife

Related

Auto-rotation not working in ICS, possible driver issue and resolution path?

As a noob, I could not post this in the thread where it applied. I hope someone sees it and passes it along.
Problem: the tab does not automatically rotate the screen image when you rotate the orientation of the device. The lock switch is "unlocked". The problem arose after the ICS update was applied.
I found this link in another device forum that seems to be dealing with the same issue.
http://forum.xda-developers.com/showthread.php?t=1592170#
Basically, he replaced the accelerometor sensor driver files I think.
Hopefully one of the developers here will see this and can hookup with the other author to see what is really going on finally.
Until then, we need to keep a safety pin handy to hard reset the A500 when it goes insane.
the_cryptonym said:
As a noob, I could not post this in the thread where it applied. I hope someone sees it and passes it along.
Problem: the tab does not automatically rotate the screen image when you rotate the orientation of the device. The lock switch is "unlocked". The problem arose after the ICS update was applied.
I found this link in another device forum that seems to be dealing with the same issue.
http://forum.xda-developers.com/showthread.php?t=1592170#
Basically, he replaced the accelerometor sensor driver files I think.
Hopefully one of the developers here will see this and can hookup with the other author to see what is really going on finally.
Until then, we need to keep a safety pin handy to hard reset the A500 when it goes insane.
Click to expand...
Click to collapse
Clean boot your tab. This will force the OS to install itself again.
Note: Clean boot will erase all the data/information which is saved on your tablet. Recommend you to back up the data before performing a clean boot.
1. Shutdown the tablet
2. Press and hold volume up key (the key next to rotation lock) until you finish step 4.
3. Press power button for 3 seconds until you feel device vibrates then release power button.
4. Once you feel device vibrates, very quick to switch on/off "rotation key" many times (this activity has to be done very fast, otherwise it will not succeed). To ensure you succeed, switch on/off rotation key when Acer logo appears on screen.
5. Wait for a while (you will see Erase Userdata and Erase Cache on top-left corner on screen), device will reboot and start from OOBE screen.
See if that fixes it.
Didn't work for me had to factory reset tab to get accelometer working again. This is the second time.
Sent from my PC36100 using XDA
Erasing as suggested did not help. Only thing found to help so far has been the pinhole hard reset. And, even that did not work once I flashed to "Acer_AV041_A500_1.041.00_WW_CUS1" version. I reverted back to what Acer had pushed to me, and it is working as well as before, meaning, it works as long as you have a pin ready to stick in it.
I have something to add to this thread. The auto-rotation issue started for me after switching to the V3 ICS bootloader.
I kind of found a workaround for it. (If you can call it that)
If I start or reboot my tablet in portrait mode. Auto-rotate works
If I start or reboot my tablet in landscape mode. Auto-rotate does not work.
This happens each and every time. It happens on Civato's new FlexReaper ROM & with Smaury's Lightspeed ROM.
Moscow? Thoughts?
Apparently how I finally solved this problem is by flashing the custom ICS bootloader V4 (read: V4 ONLY). Had tried V3, V6 and it doesn't work.
Had tried both custom ROM and stock ROM the problem will still persists with the said bootloader. But once on V4, it just works like a charm.
I have the same issue with the ratation.
Did anyone try http://forum.xda-developers.com/showthread.php?t=1592170# ??
Let me know please
qpmzal said:
Apparently how I finally solved this problem is by flashing the custom ICS bootloader V4 (read: V4 ONLY). Had tried V3, V6 and it doesn't work.
Had tried both custom ROM and stock ROM the problem will still persists with the said bootloader. But once on V4, it just works like a charm.
Click to expand...
Click to collapse
How do I flash custom ICS bootloader V4? Where is it available? And can it be flashed on top of a stock Acer ICS ROM?
FWIW, although I LOVE having Android tablets, issues like this drive me away from Android phones as I can't deal with this sort of bugginess on my daily use phone.
Ahhh, my other half has just phoned me about this, seems it started doing it after she dropped the tablet, I put the ICS update on it the other week, be nice if its a simple fix instead of a me having to take it to bits and repairs it fix..
Although I could give her my Xoom and then use that as an excuse to get myself something new
auto rotat pro
dude plz helppp......................I have to keep auto rotate off.:crying:
It will rotate Landscape, but won't return to portrait.
It wil flip Landscape on one side and Landscapeon the other side, but won't do portrait, till auto rotate is turned off.
Anybody have any suggestions on how to fix this?
I guess I could whack it and start over, but that blows! That would at least tell me something I guess.
It's really irritating. And I dont wat to do......helpppppppppppp:crying::crying::crying:

[Q] power button longpress menu does not pop up

Hello all,
My apologies if this is a common issue. I have searched but the only old thread about it is the following:
http://forum.xda-developers.com/showthread.php?t=2190960
and no real answer was suggested there, which is why I am asking it again.
So the issue is the same as in that previous thread: quite often, when I longpress the power button, the menu (to shut down, put it on vibrate mode, ...) does not pop up. The only way to get it back is to hold the power button until the phone shuts down, and then reboot the phone, after which it works again (for god knows how long).
I was rooted (with stock rom) before 4.3, but lost my root when updating to 4.3, so I was on stock ROM without root when the problem first appeared. Now yesterday I rooted again and flashed paranoid android ROM (first factory reset, clearing cache and dalvik cache), but the problem remains.
In that old thread one member solved the problem by flashing the stock kernel, however I have never flashed another kernel so I doubt the kernel is the problem?
If anybody knows the issue and a way to solve it, please let me know, it would be greatly appreciated.
Thanks,
Maarten
You did flash a kernel when you flashed the rom
Wayne Tech Nexus
Hey there
No, as in the first post, I have never flashed another kernel on the nexus. Neither did I flash a new radio.
I had not flashed anything yet when the problem started, I only unlocked the bootloader and rooted my phone when I first got it (but it worked a long time without any problems)
Delete this post
Nobody had this issue ?
Found a solution at last!!
wolfway said:
Nobody had this issue ?
Click to expand...
Click to collapse
After quite a long search and a lot of worries, I finally found THE solution...
https://www.youtube.com/watch?v=d8dbrerUacw
how to get out of factory mode for a s4 but it worked on my N7105
- efs/factoryApp/factorymode/ouvrir avec/editeur de texte/ON
- efs/factoryApp/keystr/ouvrir avec/editeur de texte/ON
I have this issue too. I'm using paranoid Android beta 4 with franco kernel and since The moment o rooted my phone this issue started
Sent from my Nexus 4 using XDA Free mobile app

[Q] Buttons and bottom half of screen unresponsive.

After the update to 4.4.2 my Galaxy Note 3(unrooted), the buttons(home, power and volume not soft keys) and the bottom half of the screen are sometimes unresponsive. It starts functioning again either after a quick lock and unlock or automatically after a few seconds. Is this a bug in the new update or a problem with the digitizer? I have tried resetting the phone a couple of times. Can someone help me?
jake262 said:
After the update to 4.4.2 my Galaxy Note 3(unrooted), the buttons(home, power and volume not soft keys) and the bottom half of the screen are sometimes unresponsive. It starts functioning again either after a quick lock and unlock or automatically after a few seconds. Is this a bug in the new update or a problem with the digitizer? I have tried resetting the phone a couple of times. Can someone help me?
Click to expand...
Click to collapse
factory reset won't remove bugs.
cause u didn't have this problem in previous firmware it s not because of hardware.
so try flash compatible stock rom from another region.
if problem remains take it to official service.
:good:
x102x96x said:
factory reset won't remove bugs.
cause u didn't have this problem in previous firmware it s not because of hardware.
so try flash compatible stock rom from another region.
if problem remains take it to official service.
:good:
Click to expand...
Click to collapse
It was an official update so short of rooting it and flashing a new firmware i don't see any other options.
jake262 said:
It was an official update so short of rooting it and flashing a new firmware i don't see any other options.
Click to expand...
Click to collapse
rooting is not necessary for flashing stock rom.
I'm having the same problems. Screen locks up often when I'm browsing in Chrome. For Gods sake this has 3gb of RAM!!!!!
Sent from my Nexus 7 using Tapatalk
x102x96x said:
factory reset won't remove bugs.
cause u didn't have this problem in previous firmware it s not because of hardware.
so try flash compatible stock rom from another region.
if problem remains take it to official service.
:good:
Click to expand...
Click to collapse
ok so i flashed a stock kitkat firnware. the problem is still there.
jake262 said:
ok so i flashed a stock kitkat firnware. the problem is still there.
Click to expand...
Click to collapse
flashed original rom via odin 3.09. Them hard reset. I have the same problem with screen. Is software problem.
Sorry for my bad English.
jake262 said:
After the update to 4.4.2 my Galaxy Note 3(unrooted), the buttons(home, power and volume not soft keys) and the bottom half of the screen are sometimes unresponsive. It starts functioning again either after a quick lock and unlock or automatically after a few seconds. Is this a bug in the new update or a problem with the digitizer? I have tried resetting the phone a couple of times. Can someone help me?
Click to expand...
Click to collapse
While phone works just pull out the battery and also don't use cover. I think its just about samsungs politics. ..
Sorry for my English
Same issue
jake262 said:
After the update to 4.4.2 my Galaxy Note 3(unrooted), the buttons(home, power and volume not soft keys) and the bottom half of the screen are sometimes unresponsive. It starts functioning again either after a quick lock and unlock or automatically after a few seconds. Is this a bug in the new update or a problem with the digitizer? I have tried resetting the phone a couple of times. Can someone help me?
Click to expand...
Click to collapse
I also have the exact same problem... I already did the factory reset but no luck. I increased the sensitivity but still happens...Can anyone help us? or it is caused by the recent upgrade of OS to kitkat version... Thanks.
GOOD NEWS!
I have been having this issue as well. Lots of research on the net has provided me with no real solutions. I think there is something missing in this update. I do not know what it is im not that smart but something is wrong across the board.
I have done a master reset back to factory and within minutes of the set up it started lagging/ not responding again. Figured i would give it a few days and well nothing changed so I contacted T-mobile and spoke with Tech Support located in Texas and he concluded that it is an SD card. He says that the SD card was on the phone prior to the update and is causing the issue since its old. WTF! I told him that the processor, ram, HDD, CPU are all considered old now. Personally I think its a stupid response.
I am going to give this a shot anyways. NO SD card no pictures no music.... Already within 15 minutes of no SD card issues are still there. I am really starting to hate this phone because of this update. Hoping to get a replacement (new) with 4.3 still on it. NO UPDATE for me till i know this and several issues are fixed.
I know i could root but i dont feel i should have to to fix any issues.
Has anyone else found a solution or heard of one yet?
Just try this , go to setting / general / power save , swith it on.
Then wait a moment before you try your phone again.
my wife phone got this issue because of over heating.
after switching the power save , the issue is gone.
update... contacted Tmobile within the last hour and apparently this rep said this is a known issue. She contacted Samsung and Google (could be blowing smoke up you know what) but she came back and said they are very aware of the issues and are vigorously working on a fix and your informations will be one of the first ones to get it. She was saying 4.4 (kitkat) screwed up a lot of Samsung devices. BTW she was also having the same problems. All replacement phones will come with 4.4 so exchanging is out of the question.
Regarding the power saving thing ill give it a shot. It was on before the master reset. Noticed it was off when i went in. On now so ill try then.

[Q] Problems with screen and Back, home, menu and something else!!!

Hi guys!
I've just bought a Note3 n9005 in Singapore, starting with ANdroid 4.4.2
At first it worked very well. But after some times I restart, an error appeared immediately after the phone is on "Unfortunately...process phone.android.com has stoppped". I choosed "OK" and it wont come again if I dont restart my phone,
But it's not only all my problems. In fact I had used a fake S-view although it doesnt work with kitkat (It's a gift from Phone store, It was only used to protect the phone like a flip-cover). And a new problem appear: sometimes my phone is in LAG Touchscreen does not work, I try to drag the Notification bar down, I can do it, and then the screen displays the "notification infomation", touching is unresponsive. Home button and 2 touch buttons Back+menu does not work too. It is just solved by turn off the screen using Power button, and turn on it again.
Can someone tell me the reason about my problems? And how to fix them?
Thank you!
P/s:I'm sorry this is my first post so it can contains errors. Tell me please
Please help meeeee
Have you verified that ur phone is genuine.If yes try doing a factory reset or reflash stock 4.4.2 from odin
Sent from my SM-N900 using XDA Premium 4 mobile app
hhealso included
shine.vietnam said:
Hi guys!
I've just bought a Note3 n9005 in Singapore, starting with ANdroid 4.4.2
At first it worked very well. But after some times I restart, an error appeared immediately after the phone is on "Unfortunately...process phone.android.com has stoppped". I choosed "OK" and it wont come again if I dont restart my phone,
But it's not only all my problems. In fact I had used a fake S-view although it doesnt work with kitkat (It's a gift from Phone store, It was only used to protect the phone like a flip-cover). And a new problem appear: sometimes my phone is in LAG Touchscreen does not work, I try to drag the Notification bar down, I can do it, and then the screen displays the "notification infomation", touching is unresponsive. Home button and 2 touch buttons Back+menu does not work too. It is just solved by turn off the screen using Power button, and turn on it again.
Can someone tell me the reason about my problems? And how to fix them?
Thank you!
P/s:I'm sorry this is my first post so it can contains errors. Tell me please
Click to expand...
Click to collapse
What did you do exactly? did you root your phone and try to delete some stuff? use touchscreen test for your touchscreen to see
the problem,, you can find them on the play store.
What is your phone build number? last resort is just get the stock firmware and reflash it with odin3.09. search it over the forum.
RISHI RAJ said:
Have you verified that ur phone is genuine.If yes try doing a factory reset or reflash stock 4.4.2 from odin
Sent from my SM-N900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I've verified, it's genuine bro I'm going to hard reset tonight cause I left it home :/
zonicz said:
What did you do exactly? did you root your phone and try to delete some stuff? use touchscreen test for your touchscreen to seethe problem,, you can find them on the play store.
What is your phone build number? last resort is just get the stock firmware and reflash it with odin3.09. search it over the forum.
Click to expand...
Click to collapse
its build number is KOT49H.N9005XXUENA6. I've not rooted it yet, It is running on stock rom 4.4.2 of Samsung.
shine.vietnam said:
I've verified, it's genuine bro I'm going to hard reset tonight cause I left it home :/
its build number is KOT49H.N9005XXUENA6. I've not rooted it yet, It is running on stock rom 4.4.2 of Samsung.
Click to expand...
Click to collapse
Yes, do factory reset first. Backup everything from kies since your device is not rooted. will see from there.
zonicz said:
Yes, do factory reset first. Backup everything from kies since your device is not rooted. will see from there.
Click to expand...
Click to collapse
This ^^
------------------------
If that doesn't fix it, you may have touchscreen issues. Some Note's are affected by this and need replaced.

Samsung S4 GT-I9505 touch lights doesnt work after update

Hello! I have a strange problem after the last update of Android 5.0.1 Somehow the touch light buttons (those near home button) doesn't work at all.
What can I do ? I flash the ROM, wipe everything, nothing seems to work.
I open to suggestions or if the is app that could fix this let me know!
Thanks in advance
I'm having the same problem but I'm not sure if its because of the last update or not.
I'm using an app called Back Button to workaround this for now.
Would also be interested in other solutions.
I have the same issue too but after a factory reset, touch light work

Categories

Resources