Related
Hello,
I have a 02 Dell Streak with Google Android 2.1 Update_1 Build 6491 Kernel Version: 2.6.29-perf.
I also have the latest version of Rom Manager with Flash Clockwork Mod 2.5.0.1 fully flashed and ready to be used.
I recently downloaded a custom 2.1 ROM to flash to my device to use from MoDaCo to use.
A few problems I am having at the moment.....[not sure if i have done this wrong or not.....]
1. Rooted my Streak with Universal Androot, Rooted fine.
2. Downloaded Rom Manager, flashed the 2.5.0.1 Recovery on my 02 Stock ROM
3. Clicked on "Reboot into Recovery", confirmed that I want to reboot into Recovery Mode, phone shuts down, switches on, gets to the Dell Logo screen, then boots the 02 splash screen and boots back into Android 2.1.........
NOTHING HAPPENDS!!
Does anyone know/think if i have done something wrong, or if there is a compatibility issue with the build that i have [Build 6491]?
Really want to get into all of the ROM modding as i have done the same with the iPhone 3G-S on 4.1 and got Android 1.5 on it and with a HTC Hero [UK GSM Version] using FroydVillian 1.5.0 [Android 2.2]
If anyone can help me, i will be most pleased!
Thanks
MiK31291 said:
Hello,
I have a 02 Dell Streak with Google Android 2.1 Update_1 Build 6491 Kernel Version: 2.6.29-perf.
I also have the latest version of Rom Manager with Flash Clockwork Mod 2.5.0.1 fully flashed and ready to be used.
I recently downloaded a custom 2.1 ROM to flash to my device to use from MoDaCo to use.
A few problems I am having at the moment.....[not sure if i have done this wrong or not.....]
1. Rooted my Streak with Universal Androot, Rooted fine.
2. Downloaded Rom Manager, flashed the 2.5.0.1 Recovery on my 02 Stock ROM
3. Clicked on "Reboot into Recovery", confirmed that I want to reboot into Recovery Mode, phone shuts down, switches on, gets to the Dell Logo screen, then boots the 02 splash screen and boots back into Android 2.1.........
NOTHING HAPPENDS!!
Does anyone know/think if i have done something wrong, or if there is a compatibility issue with the build that i have [Build 6491]?
Really want to get into all of the ROM modding as i have done the same with the iPhone 3G-S on 4.1 and got Android 1.5 on it and with a HTC Hero [UK GSM Version] using FroydVillian 1.5.0 [Android 2.2]
If anyone can help me, i will be most pleased!
Thanks
Click to expand...
Click to collapse
When you load Rom manager, do you see the installed version on the first option, or do you get "You must have the Clockwork..."? Sometimes my streak wont go into recovery when using Rom manager, I set the rom i want, then manually enter recovery if rom manager wont. no expert here, just sharing my experience with rom manager. good luck!
ebaul said:
When you load Rom manager, do you see the installed version on the first option, or do you get "You must have the Clockwork..."? Sometimes my streak wont go into recovery when using Rom manager, I set the rom i want, then manually enter recovery if rom manager wont. no expert here, just sharing my experience with rom manager. good luck!
Click to expand...
Click to collapse
Thankyou dude i do have clockwork mod recovery 2.5.0.1 and ive tried older and newer beta versions and nothing happends
Well i am having the same issue and waiting if someone can help since i need to update the phone to 2.2
Well I'm new to all this but I am trying to do the same thing utilizing Rom manager with no luck. Upon reading all the directions for upgrading and downgrading the Streak I am going to assume that for some reason Rom Manager is not fully compatible with the Streak. I could be wrong and maybe someone can verify this, but seems to me if it was compatible this would be a much easier way for upgrading and downgrading Roms on this phone.
I have sent a emai to the Clockwork recovery developer and waiting for the response. if and when i will get a response i will update everyone on this thread
vikramdhani said:
I have sent a emai to the Clockwork recovery developer and waiting for the response. if and when i will get a response i will update everyone on this thread
Click to expand...
Click to collapse
thanks dude let us know asap as i am looking to develop my own ROM but cant even upgrade to 2.2 yet as i cant get into recovery mode
No reply and i am not been able to find the solution for that as well because no matter what i try recovery will not flash
To get into clockwork mod recovery press both volume and power at the same time should work
Sent from my Dell Streak using XDA App
ok guys i have completed this for all you rogers customers
this was completed on a rogers locked streak
these are the steps i took
i rooted mine using universal androot (real easy !)
installed fastboot drivers
nandroided using clockwork recovery (the one that worked for me was 1.8.1.7)
then i flashed back to stock recovery
then flashed 02 1.6 (build 4399)
then flashed 02 2.1 (build 8105)
restored apn setting
now im just gonna see if i should do the hyde's 2.2 but from what ive read apps go missing in market so im gonna have to ask around
but yea for all you rogers heads it has been done !!!!
Good job, That's the exact way that I did it. It only took 10 hours or so to finally figure it all out. The one good thing about it is, it was good learning. I came from using HTC phones, they are super easy to flash ROMS with. This streak is a little harder, at least having flash over so many times.
yea i came from a g1 so i know the deal
I sent you a PM asking if you have your nandroid backup handy. If you do can you mirror it somewhere to help me out? I can't find the Rogers build 7921 anywhere to download.
can you make into a update.pkg ?
I sent you a PM asking if you have your nandroid backup handy. If you do can you mirror it somewhere to help me out? I can't find the Rogers build 7921 anywhere to download
Click to expand...
Click to collapse
I actually don't know, but for backup reasons (warranty) it would be nice to have. I can look into making it a pkg for flashing without clockworkmod. Thanks
Ill send it to you by pm gimme a bit
Sent from my Dell Streak using XDA App
Cool thanks
Hey I was hoping you could send it to me as well. I've bricked my streak.
how did you brick it ?
maek_it_happen said:
Ill send it to you by pm gimme a bit
Sent from my Dell Streak using XDA App
Click to expand...
Click to collapse
Ohh, any chance you could send it to me? I have been look for a a way to update my new rogers streak.
maek_it_happen said:
how did you brick it ?
Click to expand...
Click to collapse
I tried doing the update to O2 1.6 so I can do the update to O2 2.1, but now it's stuck on the Dell Logo.
Rogers Streakers unite!
any one of you cats, have issue still with the 720p camera corrupting when the 720p option is selected? This is even after flashing Steve's mbm
Rogers locked streak
Hello guys, I am a newbe and was wondering if one of you gurus can tell me step by step how to do this. I get the Nandroid part, I get lost on the "flashing" stock official Dell ROM, and the other builds. I dont know where to get these or how to do it.
Thanks for your help.
readyfordeals said:
I tried doing the update to O2 1.6 so I can do the update to O2 2.1, but now it's stuck on the Dell Logo.
Click to expand...
Click to collapse
Are you sure your waitng long enuf for it to boot , what recovery did you flash it with , and have you tried to reflash ,i have a nandroid back up for the rogers build , so u can get back to rogers 1.6
Sent from my Dell Streak using XDA App
I dont have that issue on 02 2.1 rom
Sent from my Dell Streak using XDA App
So close...
Hey there! I'm so close I can taste Froyo.... but:
Would love the help of some of the more experienced here. I'm at at dead end.
Goal is to get to Custom 1.4.6 Froyo ROM. Currently I get stuck on a blank screen after trying a O2 1.6 (4399) update from a restored stock recovery. I can restore my nandroid 7921 backup but it come up with a number of errors so not feeling to solid about that. Also says baseband unknown (see below).
What I have done so far:
ii. Rooted with Universal Root (I think - rooted for sure, not sure exactly if it was UR or another, but it said it worked(after 2 trys))
1. Setup Fastboot mode with no problems (no driver problems just worked)
2. Installed clockwork recovery v1.8.1.7
2b. Backed up using nandroid
3. Used fastboot to apply dsp1.bin (720p video) and amss.bin (baseband?) updates for 1.4.6
4. Flashed DJS Froyo 1.4.6
Result was installed fine but on attempted boot the classic stuck at Dell logo. Pretty sure I left it long enough (about 15 min or so). No luck.
5. Restored 7921 backup. Worked but LEDs were flashing (baseband miss match?) and received a 'battery error' (battery charging disabled).
Then saw this thread realized the path to take = Rogers 1.6 -> O2 1.6 -> O2 2.1 -> DJS Froyo 1.4.6 so have set off on that path.
6. Installed Stock Recovery with Fastboot
7. Attempted to flash O2 1.6 (4399). result was a blank screen for a long time (left about 15 minutes)
Soooooo....
Just to prove to myself I wasn't screwed I have since fastboot installed clockwork recovery and restored 7921 nandoid back-up. Only problem seems to be an error stating "sd-ext.img not found. Skipping restore of /sd-ext." It boots now but has that battery error still about not charging.
What I believe I should be doing (goal is still to get to DJS 1.4.6) is:
1. Restore recovery to stock recovery and flashing O2 1.6 (4933)
2. Flash O2 2.1 (8105)
3. Fastboot the recover to clockworks
4. Flash to DJS 1.4.6
But not sure how to get past my blank screen after restore of stock recovery and attempted flashing of o2 1.6 (4933). Have tried 2 different stock recovery images and 2 different o2 1.6 (4933) pkg files.
Would appreciate anyone who can show me the error(s) of my ways.
Thanks so much.
Cheers.
maek_it_happen said:
Are you sure your waitng long enuf for it to boot , what recovery did you flash it with , and have you tried to reflash ,i have a nandroid back up for the rogers build , so u can get back to rogers 1.6
Sent from my Dell Streak using XDA App
Click to expand...
Click to collapse
Is there any chance to upload that nandroid backup for us to access?
thanks
maek_it_happen said:
Are you sure your waitng long enuf for it to boot , what recovery did you flash it with , and have you tried to reflash ,i have a nandroid back up for the rogers build , so u can get back to rogers 1.6
Sent from my Dell Streak using XDA App
Click to expand...
Click to collapse
I waited over noght and nothing. I followed the steps on the general page, but I think my device never got rooted. This is an issue I believe. Please help. I am phoneless kinda right now. I will emt or paypal donate if I can get this thing to work. Really want something other then 1.6. Freak I just want this thing to boot.
paulheth said:
Hey there! I'm so close I can taste Froyo.... but:
Would love the help of some of the more experienced here. I'm at at dead end.
Goal is to get to Custom 1.4.6 Froyo ROM. Currently I get stuck on a blank screen after trying a O2 1.6 (4399) update from a restored stock recovery. I can restore my nandroid 7921 backup but it come up with a number of errors so not feeling to solid about that. Also says baseband unknown (see below).
What I have done so far:
ii. Rooted with Universal Root (I think - rooted for sure, not sure exactly if it was UR or another, but it said it worked(after 2 trys))
1. Setup Fastboot mode with no problems (no driver problems just worked)
2. Installed clockwork recovery v1.8.1.7
2b. Backed up using nandroid
3. Used fastboot to apply dsp1.bin (720p video) and amss.bin (baseband?) updates for 1.4.64. Flashed DJS Froyo 1.4.6
Result was installed fine but on attempted boot the classic stuck at Dell logo. Pretty sure I left it long enough (about 15 min or so). No luck.
5. Restored 7921 backup. Worked but LEDs were flashing (baseband miss match?) and received a 'battery error' (battery charging disabled).
Then saw this thread realized the path to take = Rogers 1.6 -> O2 1.6 -> O2 2.1 -> DJS Froyo 1.4.6 so have set off on that path.
6. Installed Stock Recovery with Fastboot
7. Attempted to flash O2 1.6 (4399). result was a blank screen for a long time (left about 15 minutes)
Soooooo....
Just to prove to myself I wasn't screwed I have since fastboot installed clockwork recovery and restored 7921 nandoid back-up. Only problem seems to be an error stating "sd-ext.img not found. Skipping restore of /sd-ext." It boots now but has that battery error still about not charging.
What I believe I should be doing (goal is still to get to DJS 1.4.6) is:
1. Restore recovery to stock recovery and flashing O2 1.6 (4933)
2. Flash O2 2.1 (8105)
3. Fastboot the recover to clockworks
4. Flash to DJS 1.4.6
But not sure how to get past my blank screen after restore of stock recovery and attempted flashing of o2 1.6 (4933). Have tried 2 different stock recovery images and 2 different o2 1.6 (4933) pkg files.
Would appreciate anyone who can show me the error(s) of my ways.
Thanks so much.
Cheers.
Click to expand...
Click to collapse
yep you should of flashed 02 1.6 first then 02 2.1 then upgraded to 1.4.6
if you can still get to recovery then you should be able to get things running again
my advice would be to try to get your baseband back to normal , not exactly sure how maybe you could find an alternate , also i think that you sd-ext could be solved by re mounting it in clockwork recovery ,ill do what i can to help you , baseband flashing is new to me
Ok, essentially all I want is swype. I dont care if I'm running stock or whatever I just need swype. I bought this phone used and pre-rooted and the dell PC suite software wasnt installed so I cant sync to change the recovery image. I tried manually installing using this
http://android.modaco.com/content/a...recovery-no-adb-no-usb-wirefree/#entry1497226
but I cant seem to find the proper download links and even then the commands (such as CP) are coming back that they dont exist. All I really need is swype so one way or another could someone help me out?
Best advice I can suggest is download the 2.2 rom again can't suggest which one unless u can tell us what rom ur using right now, figuring who ever had the phone before you deleted swype.
Just stay from scratch
Sent from my DELL STREAK 2.2 stock using XDA APP
Why do you need to change the recovery?
Do you have the swype.apk? if so just copy it over to your sd card and using astro file manager (dl it from market) and tap to install the .apk.
Also the Dell Official froyo has swype pre-installed.
What build are you running now (settings-about phone)
MY apologies for the confusion. Ok, so what I'm at now is I've currently got 2.2 installed on this. My version is Froyo Beta 1 from DJ Steve which I would love to upgrade but no other recovery screen will boot except for the one that looks like the basic recovery screen but wont flash a rom. I've tried kicking clockwork mod onto there but it goes back to the basic screen and wont flash. I've got SU access and obviously a custom rom but unfortunately I just cant seem to get a real recovery screen onto there...
Also I've gone so far as to follow this http://android.modaco.com/content/d...to-get-your-streak-back-to-factory-condition/ It says it boots the new recovery in but I am still unable to flash my way back to stock. This is the ATT streak if that matters.
Can anyone provide a simple step-by-step for installing and using Clockwork Recovery or point me to a thread that shows the steps to get it working? Thanks!!
Snyperx said:
Can anyone provide a simple step-by-step for installing and using Clockwork Recovery or point me to a thread that shows the steps to get it working? Thanks!!
Click to expand...
Click to collapse
Are you rooted ... if not root first ... then:
Go to Market,
Download Rom Manager
After ROM manger is installed, open Rom Manager
Choose install CWR
Follow instructions
Done
Cheers
Automated Process?
Think some smart Dev will come up with an automated rooting or sd honeycomb loading method? Hate to screw up this sweet reader. Tried twice and keep getting hung up.
Piece of cake
ddbarnes65 said:
Think some smart Dev will come up with an automated rooting or sd honeycomb loading method? Hate to screw up this sweet reader. Tried twice and keep getting hung up.
Click to expand...
Click to collapse
There already is a honeycomb sd image that doesn't touch your reader. Same with froyo. Also its pretty easy to root. You download the img form the developer's forums for autonooter. Turn your nook off. plug in the sd card. plug in the usb cable and wait for it to reboot.
zdrifter said:
Are you rooted ... if not root first ... then:
Go to Market,
Download Rom Manager
After ROM manger is installed, open Rom Manager
Choose install CWR
Follow instructions
Done
Cheers
Click to expand...
Click to collapse
Thanks!!! I am rooted on 1.1 using autonooter 3.0. I ended up using Nookie Froyo which has ROM Manager as part of the image, but now I can load CWR on the nook if I choose. Thanks again.
Snyperx said:
Thanks!!! I am rooted on 1.1 using autonooter 3.0. I ended up using Nookie Froyo which has ROM Manager as part of the image, but now I can load CWR on the nook if I choose. Thanks again.
Click to expand...
Click to collapse
do you load NF via the SD card? I got into the CWR bootloop (couldnt' exit CWR) using the stock 1.1 rooted with autonooter 3.0.
Hextall said:
do you load NF via the SD card? I got into the CWR bootloop (couldnt' exit CWR) using the stock 1.1 rooted with autonooter 3.0.
Click to expand...
Click to collapse
Not yet. I was able to get into ROM Manager just fine via the SD version of Nookie Froyo 0.6.6.
My phone's model is not listed in rom manager
I am using Huawei ideos X3.
I installed rom manager. when i tried to install CWM it does not lists the model of my phone. i am unable to boot in recovery mod.
Please help.
i have a gen 1 blade. i bought it used and it has Jap Jelly.
i want to install the cm7 7.0.2 which i believe is the latest stable and there is a method i want to follow which apparently is an image that when i go into recovery it just installs, easy as that.
unfortunately i cant get into recovery. tried vol+ and power, vol+, menu and power and also vol- and power. none work and simply restart phone.
i have read that using rom manager which i have installed automatically installs a recovery meant to be for gen 2 and that is why it doesnt work.
would anyone be able to shead light on this please?
thanks guys, marc
Go to your battery options and turn off quick start. Try again and it should work.
Sent from my HTC Incredible S using XDA App
cheers mate but i cant see that option anywhere
If you want to install CM7, don't bother with 7.0.2. Its really really old, and the new versions are much better and much more stable. You'd be much better to use the TPT from here and then flash the latest nightly using Clockwork. The TPT method will install a Gen 2 recovery as well, so you don't need to worry about doing that.
cheers mate.
first i uninstalled rom manager and reinstalled and then it allowed the older recovery managers to be selected. i selected and older one and i could then get into recovery.
coincidentally i had found that 7.1 method and i have just completed it, the phone is just installing my apps etc from the sync with google etc.
thanks again.
upside down recovery
I installed recovery from ROM manager but when I tried to boot into recovery using ROIM manager it booted to recovery mode with menu displayed upside down.also there are only 4 options in it
Please help to display recovery mode in proper orientation..
Thanks in Advance ..
Device : Dell XCD35
prmnt root with z4root and used room manager to install CWM
vijaykirann said:
I installed recovery from ROM manager but when I tried to boot into recovery using ROIM manager it booted to recovery mode with menu displayed upside down.also there are only 4 options in it
Please help to display recovery mode in proper orientation..
Thanks in Advance ..
Device : Dell XCD35
prmnt root with z4root and used room manager to install CWM
Click to expand...
Click to collapse
seems your phone not rooted yet, dude. try to root it first. I always use SuperUser it to perform this.
the easy way to get the latest cm7 running on your unrooted blade is to do this method i find it very noob friendly.
Root the ZTE Blade using super on click (simple google search will find the program you need) once the phone is rooted you can update your phone from GEN1 to GEN2 automatically and it will also install cm7 nightly 257 automatically
Links
Super One click: here
Gen1 to Gen2 TPT Upgrade: here (make sure you download CM Nightly 257 Version (Upgrades from Gen1 to Gen2 & installs latest CyanogenMod nightly build - all in one))
once the phone is rooted and the downloaded file is placed on the root of the sd card all you have to do is power off your phone and power on with menu & vol+ held
hope this helps you mate