Database Users

Why angrybird lag on o1

Why even at 784 overclocking it lag on stok rom .while work smooth on galaxy fit at 600 mhz
Sent from my LG-P500 using XDA Premium App

I have CM 7 beta 6.4 From Mik, Francos Kernel v15, overclocked at 768 and in some levels i have lags too. Or for a few second on the begening in some level. Quadrant test about 1300, linpack about 9 MFLOPS, Neocore about 57 FPS.

drbhavesh said:
Why even at 784 overclocking it lag on stok rom .while work smooth on galaxy fit at 600 mhz
Sent from my LG-P500 using XDA Premium App
Click to expand...
Click to collapse
Probably because of lower resolution

It is not resoution as galaxy fit has only 240-320 resolution.i think lg is not make good rom for this use poor quality hardware
Sent from my LG-P500 using XDA Premium App

My angry birds is pretty smooth after I give it like 2 seconds to load. You should get off the stock Rom and flash like cm 7. It's so much better.
Sent from my LG-P500 using XDA App

drbhavesh said:
Why even at 784 overclocking it lag on stok rom .while work smooth on galaxy fit at 600 mhz
Sent from my LG-P500 using XDA Premium App
Click to expand...
Click to collapse
I think its due to the stock rom.try devoid or mike's cm..

drbhavesh said:
It is not resoution as galaxy fit has only 240-320 resolution
Click to expand...
Click to collapse
Thats exactly what he means... it lags on Lg O1 because it has a higher resolution and doesn't lag on Galaxy Fit as it has a lower resolution, higher resolution means more processing power required... is what he is trying to say..

But cm7 rom was camara fm bug and other so i want to loose them and also eat battery
Sent from my LG-P500 using XDA Premium App

Nov in CM 7 Camera works fine and with Francos Kernel it eat 1% battery per night

try chainfire3D

Have you tried to enable jit and hw acceleration?
They improved a lot the performance in my O1.

paolog89 said:
Have you tried to enable jit and hw acceleration?
They improved a lot the performance in my O1.
Click to expand...
Click to collapse
what is chain fire 3d ?

i am using devoid Franco rom+kernal
But its too much lag on my phone

Better to wait for gb
Sent from my LG-P500 using XDA Premium App

How i dont know about it
Sent from my LG-P500 using XDA Premium App

Its a kind of graphics driver for android. It supposedly allows us to play nvidia tegra optimized games. Apparently I don't think it world for our phone.
Somebody confirm this.
Sent from my LG-P500 using XDA App

kongyujian said:
Its a kind of graphics driver for android. It supposedly allows us to play nvidia tegra optimized games. Apparently I don't think it world for our phone.
Somebody confirm this.
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
Its reported to work on our device even though we don't have the required 1GHZ Proces.

Haha really? I guess I tried it a few times with some thd games with no successes. and I can only confirm that chainfire does work on our phone because it allows us to change the texture size etc. Other than that, I doubt that the nvidia, qualcomm or powerv plugins actually work.
Sent from my LG-P500 using XDA App

sarfaraz1989 said:
try chainfire3D
Click to expand...
Click to collapse
tried on devoid.franco,but got kernel panics

I had lots of lag when it was stored on my SD card. Moved to internal storage made it much better.
When I upgraded to class 10 card I could move it back, but it still lags a tiny amount on certain levels, but is mostly fine.

V14 kernel

I started this thread because i want to be able to use Sparksco kernel v14 but it freezes when its set to 1.0GHZ I been running v10 as my daily kernel and its bottomline on my top list of kernels. Any help will be much appreciated, im on the latest nightly CM255, i had to revert back to v10 because i need speed to check emails and surf the internet...If theres another update for the V14 in the future i hope that can be a fix or its probably my setup that prevents me from reaching any higher speeds, overall Sparksco you the man!!! By the way ICS devs yall get mad props peace...

I use sparks v14 kernel on cm nightly 255 clocked right under 1ghz using smartass governer no problem. I did a full wipe of everything, and formatted system before install of everything of course. Edit: I clocked it to 2ghz and no freezes here. Did you do a full wipe before the install of the ROM/kernel?
Sent from my PG06100 using xda premium

Hey sparksco, luv your kernels, can we get smartass2 included?
Sent from my PG06100 using XDA App

Wrong forum buddy. This is a development section.
This belongs in Q&A
Just for future reference.

notsointeresting said:
Wrong forum buddy. This is a development section.
This belongs in Q&A
Just for future reference.
Click to expand...
Click to collapse
I'm notsointeresting in hearing what u got to say but I get the point XDA supervisor...

peanjr said:
I use sparks v14 kernel on cm nightly 255 clocked right under 1ghz using smartass governer no problem. I did a full wipe of everything, and formatted system before install of everything of course. Edit: I clocked it to 2ghz and no freezes here. Did you do a full wipe before the install of the ROM/kernel?
Sent from my PG06100 using xda premium
Click to expand...
Click to collapse
I'm going to have to give that a shot homie...

Kernel v14 is more geared for battery saving. I haven't updated the voltages yet because I'm not compiling gingerbread anymore, rather been working on getting a stable ICS rom build before I do more work on it. As soon as we get ICS gingerbread will be a thing of the past. Kernel v14 works good for some and v10 for others. I like v14 because of the battery I've been able to get on 122mhz min and 998mhz max. But if you up the min to the next highest setting (230mhz) you shouldn't get any lockups. Or even try 307mhz.
Edit: looks like 307mhz min is the only clock speed that allows me to overclock to 2ghz and not have any lockups. I'm also on cm nightly 255 pzguzman, and I always keep it on smartass governor.
P.S. The mods should be able to move this thread no problem without removing the comments or thread.
Sent from my PG06100 using xda premium

Yeah, forgot to mention as sparks said, at 2ghz the min is at 307mhz.
Sent from my PG06100 using xda premium

sparksco said:
Kernel v14 is more geared for battery saving. I haven't updated the voltages yet because I'm not compiling gingerbread anymore, rather been working on getting a stable ICS rom build before I do more work on it. As soon as we get ICS gingerbread will be a thing of the past. Kernel v14 works good for some and v10 for others. I like v14 because of the battery I've been able to get on 122mhz min and 998mhz max. But if you up the min to the next highest setting (230mhz) you shouldn't get any lockups. Or even try 307mhz.
Edit: looks like 307mhz min is the only clock speed that allows me to overclock to 2ghz and not have any lockups. I'm also on cm nightly 255 pzguzman, and I always keep it on smartass governor.
P.S. The mods should be able to move this thread no problem without removing the comments or thread.
Sent from my PG06100 using xda premium
Click to expand...
Click to collapse
Oh okay i see Sparksco thanks for clarifying the setup, i dont mean to steer anybody in the wrong direction especially from working on a ICS BUILD which is the most highly anticipated OS for android. But im going to flash v14 and try out the setting and will get back and let you know thanx homie...

No luck but its amazing how you guys achieve the speeds... Tried the settings but my phone cant handle the pressure lol...Im gonna stick with this kernel tho... My bad for posting this thread in the wrong section its a rookie mistake...

peanjr said:
Yeah, forgot to mention as sparks said, at 2ghz the min is at 307mhz.
Sent from my PG06100 using xda premium
Click to expand...
Click to collapse
It worked i only needed to do a full wipe, thanx homie...

By the way Sparksco i got your setup on my rom, fully functional overclocked at the max with no feezes, thanx homie...

YOU'RE USING THE WRONG GOVERNOR MIN/MAX SETTINGS
For example:
IF I want to get 2ghz out of my phone I use the performance governor and use min/max of 2ghz.
OR:
I would use:
Gov: Smartass
Min CPU: 300mhz
Max CPU: 1.5ghz
You would freeze too if you were a CPU constantly going from 100mhz to 2000mhz all the time!

prguzman1978 said:
By the way Sparksco i got your setup on my my rom, fully functional overclocked at the max with no feezes, thanx homie...
Click to expand...
Click to collapse
Glad you got it working.
Sent from my PG06100 using xda premium

jefftet said:
Hey sparksco, luv your kernels, can we get smartass2 included?
Sent from my PG06100 using XDA App
Click to expand...
Click to collapse
Smartass2 was made for the HTC Sensation which is a dual core gsm phone much like the Evo 3D (but cdma instead). I could never get it to clock passed 1.4ghz so I don't think it likes our phones much. It's a great concept but the normal old smartass still works much better for the shift.
Sent from my PG06100 using xda premium

FWIW I am hitting 2.0Ghz with no lockups or anything. I previously had been using ScaryStable for a while and anything past 1.6Ghz would lock right up nearly immediately.

danibri82 said:
FWIW I am hitting 2.0Ghz with no lockups or anything. I previously had been using ScaryStable for a while and anything past 1.6Ghz would lock right up nearly immediately.
Click to expand...
Click to collapse
Again, it depends on the governor and the min cpu. I ran scary stable at 1.9ghz for 24 hours+ straight, no lockups.

for the heck of it I ran it @ the min of like 1something hz for the low and 2.0 max just to see how it ran, and it was solid.

danibri82 said:
for the heck of it I ran it @ the min of like 1something hz for the low and 2.0 max just to see how it ran, and it was solid.
Click to expand...
Click to collapse
I understand but say you ran scary at min 100mhz and max 1.9ghz with a gov of ondemand, that would freeze for sure on any phone.

VICODAN said:
I understand but say you ran scary at min 100mhz and max 1.9ghz with a gov of ondemand, that would freeze for sure on any phone.
Click to expand...
Click to collapse
I think what he's saying is that he ran this kernel (pershoot v14) with a low min and a high max and it ran fine.
Sent from my PG06100 using xda premium

I am able to run GTA III smoothly

I am able to run GTAIII on my X8 smoothly with little lag (lags a bit when driving a car)
I was using:
GTA III settings (found it in XDA, forgot where.. Search for it)
Overclocked to 748mhz (highest for me with some reboots)
Was running on:
MiniCM7 2.18
nAa kernel 10
I don't know if it will run smoothly for others thought... Give it a try. And I also did not try it on 600mhz.
Was also running:
V6 Supercharger U9 RC5
Kick Ass Kernelizer (RC3?)
And on GTAIII settings set everything to lowest.
It's hard to type on phone...
Edit: I forgot... i was using 512mb swap (partition) i know its too much.. but hey!
And to nobodyAtall.. thanks for your awesome rom and kernel! Keep up the good work...
Sent from my E15i using xda premium

Great success, may try something also.

really cool.

amieow98 said:
I am able to run GTAIII on my X8 smoothly with little lag (lags a bit when driving a car)
I was using:
GTA III settings (found it in XDA, forgot where.. Search for it)
Overclocked to 748mhz (highest for me with some reboots)
Was running on:
MiniCM7 2.18
NaA kernel 10
I don't know if it will run smoothly for others thought... Give it a try. And I also did not try it on 600mhz.
Was also running:
V6 Supercharger U9 RC5
Kick Ass Kernelizer (RC3?)
And on GTAIII settings set everything to lowest.
It's hard to type on phone...
Sent from my E15i using xda premium
Click to expand...
Click to collapse
what gta version are you using?
I have already downloaded that launcher, but I'm useing v1.0 and it says that cannot find settup file, but gta working smoothly for me with 600mhz and without chainfire3d. maybe because of rom working so good

ty really cool

Sorry for no reply from me but... thanks for the replies! I appreciate it
Sent from my E15i using xda premium

Renegeits said:
what gta version are you using?
I have already downloaded that launcher, but I'm useing v1.0 and it says that cannot find settup file, but gta working smoothly for me with 600mhz and without chainfire3d. maybe because of rom working so good
Click to expand...
Click to collapse
Uh.. i heard there was a problem in the launcher that it doesn't detect the GTAIII
Install location... but i dont know how to fix it...
Sent from my E15i using xda premium

amieow98 said:
I am able to run GTAIII on my X8 smoothly with little lag (lags a bit when driving a car)
I was using:
GTA III settings (found it in XDA, forgot where.. Search for it)
Overclocked to 748mhz (highest for me with some reboots)
Was running on:
MiniCM7 2.18
nAa kernel 10
I don't know if it will run smoothly for others thought... Give it a try. And I also did not try it on 600mhz.
Was also running:
V6 Supercharger U9 RC5
Kick Ass Kernelizer (RC3?)
And on GTAIII settings set everything to lowest.
It's hard to type on phone...
Edit: I forgot... i was using 512mb swap (partition) i know its too much.. but hey!
And to nobodyAtall.. thanks for your awesome rom and kernel! Keep up the good work...
Sent from my E15i using xda premium
Click to expand...
Click to collapse
okey im gonna try to run GTA III on miniCM7.2 on Alfs v7 ICS(using it now ) swapping the same as u did .... and get back to u with the results thanx for the heads up!

Playing GTA3 Smooth
im playing GTA3 smooth with swap/undervolt and 19 ~ 480mhz
no lags promise
NaA minicm + NaA Kernel

xpraken said:
im playing GTA3 smooth with swap/undervolt and 19 ~ 480mhz
no lags promise
NaA minicm + NaA Kernel
Click to expand...
Click to collapse
Wow nice!
Sent from my E15i using xda premium

xpraken said:
im playing GTA3 smooth with swap/undervolt and 19 ~ 480mhz
no lags promise
NaA minicm + NaA Kernel
Click to expand...
Click to collapse
nice i trust you

xpraken said:
im playing GTA3 smooth with swap/undervolt and 19 ~ 480mhz
no lags promise
NaA minicm + NaA Kernel
Click to expand...
Click to collapse
You're using GTA III with sound or without sound ?
Sorry for my bad english

hmmm. I'm using swap 256, OC 768, RAM Manager "hard gaming", Chainfire3d powervr plugin, GTA Settings (everything low), playing version 1.0 without sounds and it's still laggy on MiniCM 2.1.9 and NaA11 kernel

Need the best cm7 kernel

Looking for the best kernel for cm7. I'm on the latest nightly and gaming is slow and choppy. I'm not even playing games that are too graphically intense either
Sent from my MB860 using XDA

Karnel
Well when i used CM7 i used Semaphore and glitch...
Sometimes i even staied with the original karnel it didnt do any problems to me

roni94 said:
Well when i used CM7 i used Semaphore and glitch...
Sometimes i even staied with the original karnel it didnt do any problems to me
Click to expand...
Click to collapse
I didn't know semaphore could be used with cm7.
The stock one for me is slow with gaming
Sent from my MB860 using XDA

Semaphore can't be used with CM7.Try Zach's Neo 18 kernel.
Sent from my GT-I9000 using xda premium

i made best experience with glitch in UV and battery on CM7 :x

Glitch kernel along with cm7 got me upto global gti9000 rank 7 in antutu benchmark tests

gcuchiha said:
Glitch kernel along with cm7 got me upto global gti9000 rank 7 in antutu benchmark tests
Click to expand...
Click to collapse
I was sort of looking at Devil kernel since its been updated recently and Glitch has not, but that sounds pretty good. Were you OCing?

Temple Run 2 smooth?

Anyone can play smoothly Temple Run 2 at "Best Visual Quality"?
I' m with last cm10, custom kernel, overclocked to 1.0 Ghz, and it isn' t smooth.
If yes, tell me which rom do you use and your overclock configuration.

i was on miui ics and honestly it was not smooth at all...
now rolling back to miui gb will update u soon

I m on JellyBeanCannon.
It runs smooth on better settings but lags on best.

For me it runs completely smooth when the app has finally booted - boot up takes quite some time.
Settings are on middle setting.
My machine:
Defy (green)
latest CM7.2 nightly by maniac
governor boosted
[email protected]/[email protected]/[email protected]
Rein haun

Also smooth on latest wiui gb
@1200 mHz, although it should run fine with stock settings as well
Sent from my MB526 using xda premium

gedhe said:
For me it runs completely smooth when the app has finally booted - boot up takes quite some time.
Settings are on middle setting.
My machine:
Defy (green)
latest CM7.2 nightly by maniac
governor boosted
[email protected]/[email protected]/[email protected]
Rein haun
Click to expand...
Click to collapse
thekguy said:
Also smooth on latest wiui gb
@1200 mHz, although it should run fine with stock settings as well
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
Yes, thanks... but with "Visual Quality" setted to "Best"?

:thumbdown: Nope lags alot guys .. I'm @ cm 10 jb 4.1.2 updated Jan' 13 ... though in India play store does not show this app on games dock.. got temme from other external link after t launch for android at 10hrs .... okiie :thumbdown:
Sent from my MB526 using xda app-developers app

Very much smooth on jb canon rom.
From 4.1.2 jelly defy @1.1Ghz \m/

Not smooth on cm10 and wiui gb with visual quality set to best, very smooth when visual quality is set to better on both roms, the default value
Sent from my MB526 using xda premium

not smooth at all on CM10!
if the word is right, i could say: unplayable!
i'll try it on MIUI V4 by Stefan now, let u guys know later.

piunti said:
not smooth at all on CM10!
if the word is right, i could say: unplayable!
i'll try it on MIUI V4 by Stefan now, let u guys know later.
Click to expand...
Click to collapse
Working fine on latest CM10 here!
Quality set to good. Haven't tried best

Try quality set to better, I'm using latest cm10 with sevenrock fixed [email protected] mHz, ksm and zram disabled. The game is absolutely smooth for me
Sent from my MB526 using xda premium

Thekguy, how long is your battery lasting running on 1200mhz?
On topic: not smooth as well on miui v4.
Now it came to my thoughts, it may be the lookout security running here.

With full charge in the morning I have around 30 % left at night with some gaming + 3G + Wi-Fi.
Vsels are:
18-300
32-600
42-800
60-1200
On topic- I find performance to be lower on the older non 2ndboot cm10 or cm9 builds
Sent from my MB526 using xda premium

runs smooth on canon v8.1.1 clocked @1.2GHz frequency is according to vsel calculator!

butter smooth on official cm7.2 @1Ghz with v6 supercharger script installed!

Latest CM7 by Maniac103 here. Runs smooth on "better", a bit stuttery on "best" but still playable.

Runs without any lag on my cm10. I prefer to play it on my defy than to my O3D.
my current score is 12.4 million without any hack, I love playing this game

Smooth on CM10 1.2 GHz with better graphics and latest game update. Playable with best graphics but lags.

brajesh.sharma87 said:
Runs without any lag on my cm10. I prefer to play it on my defy than to my O3D.
my current score is 12.4 million without any hack, I love playing this game
Click to expand...
Click to collapse
What is your multiplier mate