Hi. my friends owns a Verizon Motorola Droid X. Now, he did an SBF a while ago. After that, everything in the phone works fine except for the the fact that he can't make any new calls, nor can he connect to the internet. Now, his phone used to be able to connect to all of these using the CDMA EV-DO connection in his country (Indonesia).
I suppose that it's the A-KEY's problem, but I don't have any idea how to fix it. Do you guys have any idea how to be able to connect to the internet again? He is currently using a Liberty ROM (though that info seems insignificant, I would just like to point that out just in case).
SBF again. Sometimes this happens when Roming.
rocko73 said:
SBF again. Sometimes this happens when Roming.
Click to expand...
Click to collapse
Using a Maderstock?
Try re-activating... *228
Edit: Sorry, just noticed the "Indonesia" part... probably won't help lol.
No, use the full SBF file and RSD Lite
zwade01 said:
Try re-activating... *228
Edit: Sorry, just noticed the "Indonesia" part... probably won't help lol.
Click to expand...
Click to collapse
For Indonesia, we dial *999 instead. However, the call ends at once whenever we dial it. :S
rocko73 said:
No, use the full SBF file and RSD Lite
Click to expand...
Click to collapse
Will try to do it.
SBF'ing seems like the way to go
This is weird. It seems that after the sbf, it prompted him to activate his phone, yet it shows a Verizon sign instead of the provider in Indonesia. After he opted to write the nv items, the Verizon logo dosappears.
It can now read his phone number and the evdo, yet he still can't even make an sms message nor a phone call. Not even the 1x logo is showing in the status bar.
Sent from my Galaxy Tab via Tapatalk Pro
It seems that sbf-ing brings us back to the Verizon MIN. We decided to take the last resort: ask for a new number.
Sent from my Galaxy Tab via Tapatalk Pro
Related
It's weird.. I finally got data to work but if i try to call out it just has a busy signal and if i try to call the phone it goes to voice mail.. wtf?
boredmug said:
It's weird.. I finally got data to work but if i try to call out it just has a busy signal and if i try to call the phone it goes to voice mail.. wtf?
Click to expand...
Click to collapse
Did you finish the process with QPST after using CDMA? If your getting a fast busy signal like sound, it's more then likely Cricket not having your correct ESN. Do you have an account setup already and have provided them your converted MEID #?
My friend had given me the wrong MIN number.. for some reason data still worked. Changed the MIN and walla.. Find out another thing later that day though.. Google voice acts crazy with cricket on a flashed Droid X. Made it pretty much impossible for someone to call me. Would actually say the number is no longer in service. Tried to deactivate call forwarding from the info in account settings for google voice. it says to dial *740 on your phone and hit call.. Doesn't work. *720 WILL fix the issue though. Something to do with Cricket not doing conditional call forwarding. .
boredmug said:
My friend had given me the wrong MIN number.. for some reason data still worked. Changed the MIN and walla.. Find out another thing later that day though.. Google voice acts crazy with cricket on a flashed Droid X. Made it pretty much impossible for someone to call me. Would actually say the number is no longer in service. Tried to deactivate call forwarding from the info in account settings for google voice. it says to dial *740 on your phone and hit call.. Doesn't work. *720 WILL fix the issue though. Something to do with Cricket not doing conditional call forwarding. .
Click to expand...
Click to collapse
Glad to hear it's working. Actually, funny thing with Cricket and data...as soon as your done with CDMA, you will have data. Let's say you have a data plan already on your phone and you buy another phone you are going to upgrade to. You can still flash your new phone to Cricket and while your old phone might not have voice calls/texts, you can surf the web on both phones still getting perfectly clear 3G where it's available
YEA! I have a friend that i flashed a mogul and a Touch pro to cricket back in the day. He had the mogul activated and was still able to surf the web with the Touch pro. Nice little bonus i guess. lol
ok, so its been awhile since i have been on xda. i just got my hands on a droid x yesterday and have spent pretty much 8-12 hrs trying to figure out how the **** to flash it to cricket. can u pls post or redirect me to a site that has good instructions oon how to flash it. and yes befoore u start flaming me i have been through xda, ppcgeeks, howard forums, and droid forums. everythbing so far has been crap. i feel like a lost puppy damnit. pls help...
akaruna said:
ok, so its been awhile since i have been on xda. i just got my hands on a droid x yesterday and have spent pretty much 8-12 hrs trying to figure out how the **** to flash it to cricket. can u pls post or redirect me to a site that has good instructions oon how to flash it. and yes befoore u start flaming me i have been through xda, ppcgeeks, howard forums, and droid forums. everythbing so far has been crap. i feel like a lost puppy damnit. pls help...
Click to expand...
Click to collapse
There used to be an online tutorial on how to flash a DX to Cricket but the whole forum has been down for a while. Its a lengthy process to flash and as you already know, it takes a long time if you don't know what you are doing 100%. Techs charge up to $90 for this flash for a reason...they know the ins and outs and have a guide that's taken time and patience to make. Like myself. I can flash any Motorola Droid to Cricket in less then 10 minutes. Its taken me hours to get that fast and lots of trail and error.
What part are you having trouble with?
Sent from my DROIDX using XDA App
not sure why the other person hasnt answered but I would like some help with the same issue. I can talk and text fine via the PRL change. I can use anything CDMAWS and QPST to edit my phone but after i try using a nvram backup from whiterabbit or whether i try to edit the settings using QPST the phone restarts as normal and u see the data bar going from 1x to 3g and the phone soft resets over and over. ideas? I would like to at least get the net working. from there im sure i could resolve the next issue.
furikazashi said:
not sure why the other person hasnt answered but I would like some help with the same issue. I can talk and text fine via the PRL change. I can use anything CDMAWS and QPST to edit my phone but after i try using a nvram backup from whiterabbit or whether i try to edit the settings using QPST the phone restarts as normal and u see the data bar going from 1x to 3g and the phone soft resets over and over. ideas? I would like to at least get the net working. from there im sure i could resolve the next issue.
Click to expand...
Click to collapse
CDMA or QPST should not be causing your phone to reset unless you accidently changed a setting in QPST. Which PRL are you using? Most stable is 49027 for the DX at the moment. Did you have these issues before the flash? Did you buy the phone used and then started the flash process? I hope you didn't get a busted DX
Ben's said:
CDMA or QPST should not be causing your phone to reset unless you accidently changed a setting in QPST. Which PRL are you using? Most stable is 49027 for the DX at the moment. Did you have these issues before the flash? Did you buy the phone used and then started the flash process? I hope you didn't get a busted DX
Click to expand...
Click to collapse
My OTA update gave me 3200 PRL.
bigshotrob22 said:
My OTA update gave me 3200 PRL.
Click to expand...
Click to collapse
Which is an older PRL. Might even be geo-specific. How are your 3G speeds with the 3200? 49027 is the newest one that I know of.
Ben's said:
Which is an older PRL. Might even be geo-specific. How are your 3G speeds with the 3200? 49027 is the newest one that I know of.
Click to expand...
Click to collapse
3G Speed is pretty good. I am on the $45 plan. Are you on the android plan?
bigshotrob22 said:
3G Speed is pretty good. I am on the $45 plan. Are you on the android plan?
Click to expand...
Click to collapse
Ahh, that must be why it works! I am on the $55 plan and my 3G speeds are consistent 1.2Ghz when stupid iJunk users aren’t bogging down AT&T's network. When speed is at it's best, it always beats out my girlfriend’s Droid X 3G speed on Verizon, not by much but enough to say so.
Im using 49027. I've narrowed it down to possible glitch. Upon entering the info for the proxy manually it goes into 1x then 3g then reader loop. Ivebeen using a stock backup to revert to prior tweaking so I can keep trying to figure this out if u have a exact method u use im all ears. Or just ideas. Im running out lol
Also one more thing, ive just entered in the proxy information manually via the cell phone and the phone hasnt given me a boot loop like it used to, still the internet isnt working yet so im going to go into QPST and see if just changing the mobile IP setting throws me into the loop again...EDIT: it sends me into a soft restart loop since its on mob+simp f/back again... catlog didnt show anything that i can see sadly. the soft restart forces the log to stop and doesnt show why it did.switched it back to mobile ip only and stopped the reboot cycle but no data at all ugh...
Sent from my DROIDX using XDA App
Grr... ugh... yea so I've had a very very long two weeks. Work work work... did I mention work??? Lol. Yea but n e way I totaly forgot about this post and just happen to run across it again. Well I got the pro inserted and now im trying to figure out how to get the net workin. Im thinking ojust upgrading to the android plan or getting a new number. Now I need help with that. I've already transfered my number to the droidx and it kept sendinme through the boot loop when I would do the autostart.sh that is found on another forum... so now I ned help figuring this out so I can reswitch it to the droid x again. Or just upgrade the plan and I would need to find the right settings for that... thx for the reply btw.
akaruna said:
Grr... ugh... yea so I've had a very very long two weeks. Work work work... did I mention work??? Lol. Yea but n e way I totaly forgot about this post and just happen to run across it again. Well I got the pro inserted and now im trying to figure out how to get the net workin. Im thinking ojust upgrading to the android plan or getting a new number. Now I need help with that. I've already transfered my number to the droidx and it kept sendinme through the boot loop when I would do the autostart.sh that is found on another forum... so now I ned help figuring this out so I can reswitch it to the droid x again. Or just upgrade the plan and I would need to find the right settings for that... thx for the reply btw.
Click to expand...
Click to collapse
Did you do this?
Open QPST Service Programming
You should see your phone listed in the list. Select it, click Start
Clients>Service Programming. When it opens select your phone and click OK in
the Service Programming screen.
On the bottom left click a button labeled Read from Phone, a box will
popup, there should be 000000 already typed in, click OK. this may take a
few minutes.
Go to the M.IP tab. Click on the entry in the User Profile box and click
Edit. Make sure that NAI and Tethered NAI both read [email protected]
(replace the x's with your 10 digit phone number). If they don't, type it
in. Also make sure Home Address, Primary HA Address and Secondary HA Address
read 0.0.0.0 if they don't, change them. Click OK
While still on the M.IP tab make sure Mobile IP Behavior is set to Mob +
Simp f/back. And make sure Active User says 0.
Go to the PPP Config tab. Click UM button. In the PPP Authentication
section make sure Tethered NAI and User ID reads [email protected]
(replace the x's with your 10 digit phone number) and Req PW enc is checked
and type cricket in for the password.
While still in the PPP Config tab click the AN button. In the PPP
Authentication section make sure User ID reads [email protected]
(replace the x's with your 10 digit phone number) and Req PW enc is checked
and type cricket in for the password. Tethered NAI should be blank.
Now on the bottom click Write to Phone. May take a few minutes and your
phone may restart.
Flash the Cricket V10 zip and download autostart root from the market
bigshotrob22 said:
Did you do this?
Open QPST Service Programming
You should see your phone listed in the list. Select it, click Start
Clients>Service Programming. When it opens select your phone and click OK in
the Service Programming screen.
On the bottom left click a button labeled Read from Phone, a box will
popup, there should be 000000 already typed in, click OK. this may take a
few minutes.
Go to the M.IP tab. Click on the entry in the User Profile box and click
Edit. Make sure that NAI and Tethered NAI both read [email protected]
(replace the x's with your 10 digit phone number). If they don't, type it
in. Also make sure Home Address, Primary HA Address and Secondary HA Address
read 0.0.0.0 if they don't, change them. Click OK
While still on the M.IP tab make sure Mobile IP Behavior is set to Mob +
Simp f/back. And make sure Active User says 0.
Go to the PPP Config tab. Click UM button. In the PPP Authentication
section make sure Tethered NAI and User ID reads [email protected]ricket.com
(replace the x's with your 10 digit phone number) and Req PW enc is checked
and type cricket in for the password.
While still in the PPP Config tab click the AN button. In the PPP
Authentication section make sure User ID reads [email protected]
(replace the x's with your 10 digit phone number) and Req PW enc is checked
and type cricket in for the password. Tethered NAI should be blank.
Now on the bottom click Write to Phone. May take a few minutes and your
phone may restart.
Flash the Cricket V10 zip and download autostart root from the market
Click to expand...
Click to collapse
Yup, except for the v10 zip. No mention of that before...
akaruna said:
Yup, except for the v10 zip. No mention of that before...
Click to expand...
Click to collapse
You can find it here: http://forum.xda-developers.com/showthread.php?t=730289
Just flash it in ROM Manager
I've talked to a couple of folks on the V10 token. Some say it has no relevance and one said it might actually harm your phone since it's not even made for the Droid X specifically. I tried it and it didn’t do anything. It came to be that my MNC in my APN was incorrect.
Without doing a full SBF on your phone, there array of issues you might have are to wide to diagnose. You need to start over and not use your backup. If the problem still persists then let us know but I doubt it will if you did the Cricket flash properly.
Have you changed your APN settings as well? I use anycut from the market to edit and save it.
Ben's said:
I've talked to a couple of folks on the V10 token. Some say it has no relevance and one said it might actually harm your phone since it's not even made for the Droid X specifically. I tried it and it didn’t do anything. It came to be that my MNC in my APN was incorrect.
Without doing a full SBF on your phone, there array of issues you might have are to wide to diagnose. You need to start over and not use your backup. If the problem still persists then let us know but I doubt it will if you did the Cricket flash properly.
Have you changed your APN settings as well? I use anycut from the market to edit and save it.
Click to expand...
Click to collapse
I've always used it and it does help. It has never broken my X. I don't know why why it doesn't work for you but I've used it on my old ERIS, Droid X, and my wifes DInc.
Sent from my DROIDX using XDA App
so a friend of mine wants me to flash his continuum to cricket. can n e one tell me how to connect it to QPST??? thx. ive already used google, ppcgeeks, here of course, &hc.
You need to put the phone in modem mode.. It is in settings.
Tell him to sell it. Only talk and text work. Ppp configs revert back to verizon so three g won't work.
And it's not called modem mode. It's Dial up networking.
jenisiz said:
Tell him to sell it. Only talk and text work. Ppp configs revert back to verizon so three g won't work.
And it's not called modem mode. It's Dial up networking.
Click to expand...
Click to collapse
I have all features working including fast internet and mms all for 55 a month, so yes, it is possible to get the phone fully working on Cricket.
HELP!!
titanblitz said:
I have all features working including fast internet and mms all for 55 a month, so yes, it is possible to get the phone fully working on Cricket.
Click to expand...
Click to collapse
is there any bodu who can point me in the right direction on how to get my phone flashed over to cricket with all settings and updates. i broke my other phone and this is an important situation so if someone can help me thanks.. i have the verizon samsung s cotinuum
There are a lot of guides for flashing cricket to Android phones
The only thing that differs from say, flashing it to a droid 2 global, is getting the phone connected to qpst initially..
trailblazer101 said:
There are a lot of guides for flashing cricket to Android phones
The only thing that differs from say, flashing it to a droid 2 global, is getting the phone connected to qpst initially..
Click to expand...
Click to collapse
I've looked for guides and so far have not found any for the continuum flashed to cricket on 2.1 update 1. I know how to use qpst and I've programed it onto my NV items and it states 7 written but isn't it suppose to say 12? But otherwise I have talk and text but haven't figured out internet or mms. So if someone can point me where I have to go and I will be glad to do it. Thank-you. Z
That's because there are none xP as I was saying, you can use pretty much any of the guides for any android phone...
And I am not sure, but doesn't the internet settings hide under the m.ip tab in qpst? I don't know...
I remember though, there is a file you are supposed to set up so that it automatically sets up a proxy out something xP
What you need is to talk to someone who got it to work xP but I highly doubt you'll find that person xP
Sent from my SCH-I400 using XDA Premium App
titanblitz said:
I have all features working including fast internet and mms all for 55 a month, so yes, it is possible to get the phone fully working on Cricket.
Click to expand...
Click to collapse
well why dont you write something up to help others
if it worked for you!!!!!!!
hi i was wondering since i bought a new phone and verizon deactivated my dx, if it was possible to somehow install something that would allow me to use it as just a pda (with no data or phone service, just wifi)?
why? because i want to
Just enable airplane mode then enable wifi. Should work just fine.
zehkaiser said:
Just enable airplane mode then enable wifi. Should work just fine.
Click to expand...
Click to collapse
so i can still turn it on?
ok just got it to work. AWSOME!! the funny thing is verizon told me that it would NOT even turn on if it wasn't connected to a number on their network!
loismustdie555 said:
ok just got it to work. AWSOME!! the funny thing is verizon told me that it would NOT even turn on if it wasn't connected to a number on their network!
Click to expand...
Click to collapse
Does the GPS work?
amaruk27 said:
Does the GPS work?
Click to expand...
Click to collapse
On stock roms GPS doesn't work without activation; however, on roms such as CyanogenMod you can use GPS without having activated the phone.
Sent from my DROIDX using XDA App
loismustdie555 said:
ok just got it to work. AWSOME!! the funny thing is verizon told me that it would NOT even turn on if it wasn't connected to a number on their network!
Click to expand...
Click to collapse
Did they really tell you that? When the phone comes new from the factory it isn't activated. I guess they use elven magic to activate it *eyeroll* Verizon reps are serious bullsh!t artists.
infazzdar said:
On stock roms GPS doesn't work without activation; however, on roms such as CyanogenMod you can use GPS without having activated the phone.
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
That figures. Of course I'd take CM over stock any day.
amaruk27 said:
Did they really tell you that? When the phone comes new from the factory it isn't activated. I guess they use elven magic to activate it *eyeroll* Verizon reps are serious bullsh!t artists.
That figures. Of course I'd take CM over stock any day.
Click to expand...
Click to collapse
Yes they are. In fact they even told me I couldn't buy my new phone "unless it was connected to a phone number and their data package".
Sent from my R800x running 2.3.3 with DooMLorD's v03 kernel
loismustdie555 said:
hi i was wondering since i bought a new phone and verizon deactivated my dx, if it was possible to somehow install something that would allow me to use it as just a pda (with no data or phone service, just wifi)?
why? because i want to
Click to expand...
Click to collapse
I want to do the same thing, however, when I turn my DE-ACTIVATED Droid X on the only option I get is "Welcome to Droid X, Touch thr Android to Begin" and then it wants to call Verizon to get the phone activated.
There is no way to get to "Airplane Mode" or any other menu.
Please help ...
wikowsky said:
I want to do the same thing, however, when I turn my DE-ACTIVATED Droid X on the only option I get is "Welcome to Droid X, Touch thr Android to Begin" and then it wants to call Verizon to get the phone activated.
There is no way to get to "Airplane Mode" or any other menu.
Please help ...
Click to expand...
Click to collapse
I believe that touching the four corners of the activation screen exits the activation window.
Sent from my DROIDX using XDA App
infazzdar said:
I believe that touching the four corners of the activation screen exits the activation window.
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
Noticing that the wifi tether problem keeps coming back for my Droid X, I was wondering if anyone has a solution. Today is Nov 17, 2011 and I find solutions as far back as August, but nothing more recent.
I got my Droid RAZR fixed in about 5 minutes using SQLite editing line 150 changeing the "1" to a "0" and now I use the Verizon Hotspot button and tethering works great, although none of the wifi tether apps will work.
Has anyone found a similar fix for the Droid X?
Thanks in advance!
Hi, so I used cokes flasher and I'm on verizon :/. I wanted android NAND on my phone so I flashed my phone or I think I did and I wiped my micro sd card and put the android file on It but it didn't work so I then realized I was roaming so i called verizon to activate my phone and after a successful activation my phone still doesn't make calls or texts I have no idea what to do and I feel sick to my stomach thinking about this :/ I wish I never played around with this. My phone is fine besides the fact it cannot make a call or text. I'm on windows mobile 6.1. I am so scared I ruined my favorite phone, I hope someone can please help me.
joedajoester said:
Hi, so I used cokes flasher thingy and I'm on verizon so I don't think that was ok since i now know its for CDMA only :/. I wanted android NAND on my phone so I flashed my phone or I think I did and I wiped my micro sd card and put the android file on It but it didn't work so I then realized I was roaming so i called verizon to activate my phone and after a successful activation my phone still doesn't make calls or texts I have no idea what to do and I feel sick to my stomach thinking about this :/ I wish I never played around with this. My phone is fine besides the fact it cannot communicate. I'm on windows mobile 6.1. I am so scared I ruined my favorite phone, I hope someone can please help me.
Click to expand...
Click to collapse
Have you dialed *228 and used option 1? (Is that what you mean by calling activation)
mrkite38 said:
Have you dialed *228 and used option 1? (Is that what you mean by calling activation)
Click to expand...
Click to collapse
Yes, I called *228 and pressed option 1 and after it says activation successful, my phone restarts and the roaming bar goes away but i still cant make calls :/ would the numbers on my screen when i boot up be useful? If so here they are.
M 03 P DCAAXOM-4350H
B 01 R 3.37.78
D 3.14
Thanks
Would you like to talk on skype or something so we can get this done fast
Really no one?!?
What prl are you running? Make sure you have a Verizon prl. There are guides all over xda for that.
Sent from my HTC One V using xda app-developers app
I am using PRL 53162, and radio version 3.37.78
I have pacman rom 23.0.0 installed. Unlocked bootloader. I'm using T-Mobile gsm. My cell service randomly drops stopping me from being able to call or text. Also, the rom keeps checking the "use 2g service only" box and i constantly have to UN check it? My stock backup has disappeared and Matt's utility does not work for me? Any suggestions? Thanks in advance!
Sent from my XT907 using xda app-developers app
dablazeizon4eva said:
I have pacman rom 23.0.0 installed. Unlocked bootloader. I'm using T-Mobile gsm. My cell service randomly drops stopping me from being able to call or text. Also, the rom keeps checking the "use 2g service only" box and i constantly have to UN check it? My stock backup has disappeared and Matt's utility does not work for me? Any suggestions? Thanks in advance!
Sent from my XT907 using xda app-developers app
Click to expand...
Click to collapse
This used to happen to my old Droid 2 Global which was unlocked for GSM. I used it on AT&T and sometimes the signal would drop completely and a reboot would be the only way to bring it back, and my Razr M often drops data connectivity (though signal still remains strong) for a couple minutes at relatively frequent intervals. I think it's just the problem with using phones meant for CDMA on GSM networks.
With that said, what does Matt's Utility say? Have you installed the Motorola drivers found here ?
If none of that helps, try going to a T-Mobile store and asking for a replacement SIM. It sounds kinda dumb, but I had a Nokia Lumia 710 that would randomly reboot throughout the day. Somewhere on the internet I read that someone else had the same problem, and replacing the SIM fixed it. I thought it was stupid at the time, but I got a new SIM and it worked! Crazy stuff.
thanks for the reply. unfortunately it does not matter now. i used rsd lite to flash to stock which all went good but there was an ota update that took and the phone rebooted but will now not turn on at all no matter what. It is totally done... I only get a green light while charging or plugged into the computer but nothing works to bring it back to life. Thanks anyways!!!