Related
for those who may be interested...it is possible to have your hero flashed to work on the Cricket network. it may not be for everyone, but i couldn't resist the lure of $40/mo unlimited everything with no contract. (saves around $1,000+ over the life of the contract)
here's what i did:
-buy cdma hero on ebay
-go to a cricket store and ask them to activate the phone
-usually the rep will "know a guy" who can work with htc (try a few stores or call around)
-they may charge you $30 or so to flash it and its working
wireless data, visual voicemail, and mms dont' work...but they expect to get them working soon (phone is only a few weeks old at this point)... and where i'm at, i almost always have wifi and don't care about vm or mms.
Might see if any of these guys know about xda...perhaps they just need to be pointed here to share the wealth of what they're doing.
HTC Hero Phone Code Numbers ##
if you do transfer to cricket (or perhaps another cdma carrier), a good thing to know is:
##000000#
this will allow you to edit or view EPST (change/view your Mobile Directory Number MDN and MSID)
The MDN is your current phone number, your local cricket store can give you your MSID (which also depends on your phone number).
yourmanstan said:
for those who may be interested...it is possible to have your hero flashed to work on the Cricket network. it may not be for everyone, but i couldn't resist the lure of $40/mo unlimited everything with no contract. (saves around $1,000+ over the life of the contract)
here's what i did:
-buy cdma hero on ebay
-go to a cricket store and ask them to activate the phone
-usually the rep will "know a guy" who can work with htc (try a few stores or call around)
-they may charge you $30 or so to flash it and its working
wireless data, visual voicemail, and mms dont' work...but they expect to get them working soon (phone is only a few weeks old at this point)... and where i'm at, i almost always have wifi and don't care about vm or mms.
Click to expand...
Click to collapse
I dont believe you. How could you possibly "flash it" with out root access?
Negrito said:
I dont believe you. How could you possibly "flash it" with out root access? /QUOTE]
don't believe me then...i'm sure i just imagined myself doing all those things and making phone calls without a sprint account.
Click to expand...
Click to collapse
yourmanstan said:
don't believe me then...i'm sure i just imagined myself doing all those things and making phone calls without a sprint account. ?
Click to expand...
Click to collapse
Well if im just "being stupid" then you could simply prove me wrong. Put up, or Shut up!
cant wait
Negrito said:
Well if im just "beingstupid" then you could simply prove me wrong. Put up, or Shut up!
Click to expand...
Click to collapse
i think he means the regular flash as in flashing the prl not flashing a cricket rom... i cant wait for a rom that i can use on cricket... i have text n voice workin but net and mms is light years away since the phone just came out... cmon guys speed it up... ive been prayin to the cricket flashing gods to give us a saviour to answer our prayers...
Not so far away
I´m in Mexico, and I have a Hero woking here with data. So far it´s 1x, but I only worked on it for about 3 hours. After this long weekend (we have monday off here) I´ll get to work on it to make Ev work.
Don´t lose heart It´ll get there.
Negrito said:
I dont believe you. How could you possibly "flash it" with out root access?
Click to expand...
Click to collapse
The radio is separate from the OS and the traditional CDMA tools work on the Hero like any other phone. There are plenty of other forums talking about how to port CDMA phones to other providers; especially Indian forums because there are large CDMA networks there.
Edit: when he says "flash it," he probably just means to put a new PRL (preferred roaming list) and editing the details under ##DATA to match what another provider wants.
kRutOn said:
The radio is separate from the OS and the traditional CDMA tools work on the Hero like any other phone. There are plenty of other forums talking about how to port CDMA phones to other providers; especially Indian forums because there are large CDMA networks there.
Edit: when he says "flash it," he probably just means to put a new PRL (preferred roaming list) and editing the details under ##DATA to match what another provider wants.
Click to expand...
Click to collapse
Yeah, thats exactly what it says two posts above yours from a week ago.
jhgas said:
I´m in Mexico, and I have a Hero woking here with data. So far it´s 1x, but I only worked on it for about 3 hours. After this long weekend (we have monday off here) I´ll get to work on it to make Ev work.
Don´t lose heart It´ll get there.
Click to expand...
Click to collapse
any luck jhgas?
"Broadband Workaround Trick"
Hey guys!
I'm new to the Hero (CDMA Sprint flashed to Cricket) and Android. Totally new. I'm no stranger to Windows Mobile though, I've been a pretty intense user and contributor to development on the Axim x51v. Thought it was time to update though, and here I am.
Now, I've googled my butt off (which is going to make it tough to poop later, for sure), and I just can't find much detail or step by step info on how to get internet access working on this thing other than Wifi.
I have phone/text, and I also bought a Cricket Broadband plan to go along with it.
My phone is not rooted, not unlocked, unless this was part of what they did at the Cricket store to get my Hero flashed to Cricket.
I've read some mentions in google searches about a way to use my Broadband service through my phone... but I need some step by step info on how to do this. Can anyone help? What would be handy, as a somewhat savvy noob, would be prerequisites, instructions, and info I'll need to do this.
Thanks in advance if anyone can help, and I apologize in advance if I didn't google well enough before asking... although I definitely gave it a damn good shot before asking for help!
I've never tried it, so i don't know, but i have flashed a lot of WM phones to cricket with working mms and WAP. I would think you could get the internet to work by entering first changing your msl to 000000 and then just entering in all the correct settings in your EPST like you would a windows mobile phone?
cricket wap on hero
the phone has built in proxy support so u can download anycut from the market and input "wap.mycricket.com" and "8080" in the proxy settings. however most of the internet apps dont work, but the browser does. i believe the broadband hack or possibly the html plan will help in getting the internet apps to work but havent tried yet
htc hero wap no working
.i have a sprint htc hero that had cellular south on it now its flashed to cricket.the only thing working is calling.can you walk me through getting internet.i belive my wap setting are set up,but when i try and connect to mobile network it says "standbye for connecting to mobile network then connecting and keeps repeating"i have read that iv got to root the phone.iv been trying to root with no success.and hepl please .ty
htc hero cricket
please help dont want to try anything till im shure .lol
its actually possible. my friend works for cricket and got a sprint branded touch pro working. he just has voice and mms. but its a start i guess. i needs my data lol.
so why would you want a hero that only half the features work on?
i have an htc hero...i live in laredo tx..if anyone knows how i can flash this cell phone to cricket please let me know..they have told me that they dont have the software to do so..please HELP ME!!! *TeAr* and where did u guyz flash it so i can go overthere if i cant do to here....
yourmanstan said:
for those who may be interested...it is possible to have your hero flashed to work on the Cricket network. it may not be for everyone, but i couldn't resist the lure of $40/mo unlimited everything with no contract. (saves around $1,000+ over the life of the contract)
here's what i did:
-buy cdma hero on ebay
-go to a cricket store and ask them to activate the phone
-usually the rep will "know a guy" who can work with htc (try a few stores or call around)
-they may charge you $30 or so to flash it and its working
wireless data, visual voicemail, and mms dont' work...but they expect to get them working soon (phone is only a few weeks old at this point)... and where i'm at, i almost always have wifi and don't care about vm or mms.
Click to expand...
Click to collapse
hey please let me know where you flashed your htc hero....i will go to whereever to do so..LoL...im in laredo i think wer r not dat advanced n all this **** of flashing cell phones...
It's weird.. I finally got data to work but if i try to call out it just has a busy signal and if i try to call the phone it goes to voice mail.. wtf?
boredmug said:
It's weird.. I finally got data to work but if i try to call out it just has a busy signal and if i try to call the phone it goes to voice mail.. wtf?
Click to expand...
Click to collapse
Did you finish the process with QPST after using CDMA? If your getting a fast busy signal like sound, it's more then likely Cricket not having your correct ESN. Do you have an account setup already and have provided them your converted MEID #?
My friend had given me the wrong MIN number.. for some reason data still worked. Changed the MIN and walla.. Find out another thing later that day though.. Google voice acts crazy with cricket on a flashed Droid X. Made it pretty much impossible for someone to call me. Would actually say the number is no longer in service. Tried to deactivate call forwarding from the info in account settings for google voice. it says to dial *740 on your phone and hit call.. Doesn't work. *720 WILL fix the issue though. Something to do with Cricket not doing conditional call forwarding. .
boredmug said:
My friend had given me the wrong MIN number.. for some reason data still worked. Changed the MIN and walla.. Find out another thing later that day though.. Google voice acts crazy with cricket on a flashed Droid X. Made it pretty much impossible for someone to call me. Would actually say the number is no longer in service. Tried to deactivate call forwarding from the info in account settings for google voice. it says to dial *740 on your phone and hit call.. Doesn't work. *720 WILL fix the issue though. Something to do with Cricket not doing conditional call forwarding. .
Click to expand...
Click to collapse
Glad to hear it's working. Actually, funny thing with Cricket and data...as soon as your done with CDMA, you will have data. Let's say you have a data plan already on your phone and you buy another phone you are going to upgrade to. You can still flash your new phone to Cricket and while your old phone might not have voice calls/texts, you can surf the web on both phones still getting perfectly clear 3G where it's available
YEA! I have a friend that i flashed a mogul and a Touch pro to cricket back in the day. He had the mogul activated and was still able to surf the web with the Touch pro. Nice little bonus i guess. lol
ok, so its been awhile since i have been on xda. i just got my hands on a droid x yesterday and have spent pretty much 8-12 hrs trying to figure out how the **** to flash it to cricket. can u pls post or redirect me to a site that has good instructions oon how to flash it. and yes befoore u start flaming me i have been through xda, ppcgeeks, howard forums, and droid forums. everythbing so far has been crap. i feel like a lost puppy damnit. pls help...
akaruna said:
ok, so its been awhile since i have been on xda. i just got my hands on a droid x yesterday and have spent pretty much 8-12 hrs trying to figure out how the **** to flash it to cricket. can u pls post or redirect me to a site that has good instructions oon how to flash it. and yes befoore u start flaming me i have been through xda, ppcgeeks, howard forums, and droid forums. everythbing so far has been crap. i feel like a lost puppy damnit. pls help...
Click to expand...
Click to collapse
There used to be an online tutorial on how to flash a DX to Cricket but the whole forum has been down for a while. Its a lengthy process to flash and as you already know, it takes a long time if you don't know what you are doing 100%. Techs charge up to $90 for this flash for a reason...they know the ins and outs and have a guide that's taken time and patience to make. Like myself. I can flash any Motorola Droid to Cricket in less then 10 minutes. Its taken me hours to get that fast and lots of trail and error.
What part are you having trouble with?
Sent from my DROIDX using XDA App
not sure why the other person hasnt answered but I would like some help with the same issue. I can talk and text fine via the PRL change. I can use anything CDMAWS and QPST to edit my phone but after i try using a nvram backup from whiterabbit or whether i try to edit the settings using QPST the phone restarts as normal and u see the data bar going from 1x to 3g and the phone soft resets over and over. ideas? I would like to at least get the net working. from there im sure i could resolve the next issue.
furikazashi said:
not sure why the other person hasnt answered but I would like some help with the same issue. I can talk and text fine via the PRL change. I can use anything CDMAWS and QPST to edit my phone but after i try using a nvram backup from whiterabbit or whether i try to edit the settings using QPST the phone restarts as normal and u see the data bar going from 1x to 3g and the phone soft resets over and over. ideas? I would like to at least get the net working. from there im sure i could resolve the next issue.
Click to expand...
Click to collapse
CDMA or QPST should not be causing your phone to reset unless you accidently changed a setting in QPST. Which PRL are you using? Most stable is 49027 for the DX at the moment. Did you have these issues before the flash? Did you buy the phone used and then started the flash process? I hope you didn't get a busted DX
Ben's said:
CDMA or QPST should not be causing your phone to reset unless you accidently changed a setting in QPST. Which PRL are you using? Most stable is 49027 for the DX at the moment. Did you have these issues before the flash? Did you buy the phone used and then started the flash process? I hope you didn't get a busted DX
Click to expand...
Click to collapse
My OTA update gave me 3200 PRL.
bigshotrob22 said:
My OTA update gave me 3200 PRL.
Click to expand...
Click to collapse
Which is an older PRL. Might even be geo-specific. How are your 3G speeds with the 3200? 49027 is the newest one that I know of.
Ben's said:
Which is an older PRL. Might even be geo-specific. How are your 3G speeds with the 3200? 49027 is the newest one that I know of.
Click to expand...
Click to collapse
3G Speed is pretty good. I am on the $45 plan. Are you on the android plan?
bigshotrob22 said:
3G Speed is pretty good. I am on the $45 plan. Are you on the android plan?
Click to expand...
Click to collapse
Ahh, that must be why it works! I am on the $55 plan and my 3G speeds are consistent 1.2Ghz when stupid iJunk users aren’t bogging down AT&T's network. When speed is at it's best, it always beats out my girlfriend’s Droid X 3G speed on Verizon, not by much but enough to say so.
Im using 49027. I've narrowed it down to possible glitch. Upon entering the info for the proxy manually it goes into 1x then 3g then reader loop. Ivebeen using a stock backup to revert to prior tweaking so I can keep trying to figure this out if u have a exact method u use im all ears. Or just ideas. Im running out lol
Also one more thing, ive just entered in the proxy information manually via the cell phone and the phone hasnt given me a boot loop like it used to, still the internet isnt working yet so im going to go into QPST and see if just changing the mobile IP setting throws me into the loop again...EDIT: it sends me into a soft restart loop since its on mob+simp f/back again... catlog didnt show anything that i can see sadly. the soft restart forces the log to stop and doesnt show why it did.switched it back to mobile ip only and stopped the reboot cycle but no data at all ugh...
Sent from my DROIDX using XDA App
Grr... ugh... yea so I've had a very very long two weeks. Work work work... did I mention work??? Lol. Yea but n e way I totaly forgot about this post and just happen to run across it again. Well I got the pro inserted and now im trying to figure out how to get the net workin. Im thinking ojust upgrading to the android plan or getting a new number. Now I need help with that. I've already transfered my number to the droidx and it kept sendinme through the boot loop when I would do the autostart.sh that is found on another forum... so now I ned help figuring this out so I can reswitch it to the droid x again. Or just upgrade the plan and I would need to find the right settings for that... thx for the reply btw.
akaruna said:
Grr... ugh... yea so I've had a very very long two weeks. Work work work... did I mention work??? Lol. Yea but n e way I totaly forgot about this post and just happen to run across it again. Well I got the pro inserted and now im trying to figure out how to get the net workin. Im thinking ojust upgrading to the android plan or getting a new number. Now I need help with that. I've already transfered my number to the droidx and it kept sendinme through the boot loop when I would do the autostart.sh that is found on another forum... so now I ned help figuring this out so I can reswitch it to the droid x again. Or just upgrade the plan and I would need to find the right settings for that... thx for the reply btw.
Click to expand...
Click to collapse
Did you do this?
Open QPST Service Programming
You should see your phone listed in the list. Select it, click Start
Clients>Service Programming. When it opens select your phone and click OK in
the Service Programming screen.
On the bottom left click a button labeled Read from Phone, a box will
popup, there should be 000000 already typed in, click OK. this may take a
few minutes.
Go to the M.IP tab. Click on the entry in the User Profile box and click
Edit. Make sure that NAI and Tethered NAI both read [email protected]
(replace the x's with your 10 digit phone number). If they don't, type it
in. Also make sure Home Address, Primary HA Address and Secondary HA Address
read 0.0.0.0 if they don't, change them. Click OK
While still on the M.IP tab make sure Mobile IP Behavior is set to Mob +
Simp f/back. And make sure Active User says 0.
Go to the PPP Config tab. Click UM button. In the PPP Authentication
section make sure Tethered NAI and User ID reads [email protected]
(replace the x's with your 10 digit phone number) and Req PW enc is checked
and type cricket in for the password.
While still in the PPP Config tab click the AN button. In the PPP
Authentication section make sure User ID reads [email protected]
(replace the x's with your 10 digit phone number) and Req PW enc is checked
and type cricket in for the password. Tethered NAI should be blank.
Now on the bottom click Write to Phone. May take a few minutes and your
phone may restart.
Flash the Cricket V10 zip and download autostart root from the market
bigshotrob22 said:
Did you do this?
Open QPST Service Programming
You should see your phone listed in the list. Select it, click Start
Clients>Service Programming. When it opens select your phone and click OK in
the Service Programming screen.
On the bottom left click a button labeled Read from Phone, a box will
popup, there should be 000000 already typed in, click OK. this may take a
few minutes.
Go to the M.IP tab. Click on the entry in the User Profile box and click
Edit. Make sure that NAI and Tethered NAI both read [email protected]
(replace the x's with your 10 digit phone number). If they don't, type it
in. Also make sure Home Address, Primary HA Address and Secondary HA Address
read 0.0.0.0 if they don't, change them. Click OK
While still on the M.IP tab make sure Mobile IP Behavior is set to Mob +
Simp f/back. And make sure Active User says 0.
Go to the PPP Config tab. Click UM button. In the PPP Authentication
section make sure Tethered NAI and User ID reads [email protected]ricket.com
(replace the x's with your 10 digit phone number) and Req PW enc is checked
and type cricket in for the password.
While still in the PPP Config tab click the AN button. In the PPP
Authentication section make sure User ID reads [email protected]
(replace the x's with your 10 digit phone number) and Req PW enc is checked
and type cricket in for the password. Tethered NAI should be blank.
Now on the bottom click Write to Phone. May take a few minutes and your
phone may restart.
Flash the Cricket V10 zip and download autostart root from the market
Click to expand...
Click to collapse
Yup, except for the v10 zip. No mention of that before...
akaruna said:
Yup, except for the v10 zip. No mention of that before...
Click to expand...
Click to collapse
You can find it here: http://forum.xda-developers.com/showthread.php?t=730289
Just flash it in ROM Manager
I've talked to a couple of folks on the V10 token. Some say it has no relevance and one said it might actually harm your phone since it's not even made for the Droid X specifically. I tried it and it didn’t do anything. It came to be that my MNC in my APN was incorrect.
Without doing a full SBF on your phone, there array of issues you might have are to wide to diagnose. You need to start over and not use your backup. If the problem still persists then let us know but I doubt it will if you did the Cricket flash properly.
Have you changed your APN settings as well? I use anycut from the market to edit and save it.
Ben's said:
I've talked to a couple of folks on the V10 token. Some say it has no relevance and one said it might actually harm your phone since it's not even made for the Droid X specifically. I tried it and it didn’t do anything. It came to be that my MNC in my APN was incorrect.
Without doing a full SBF on your phone, there array of issues you might have are to wide to diagnose. You need to start over and not use your backup. If the problem still persists then let us know but I doubt it will if you did the Cricket flash properly.
Have you changed your APN settings as well? I use anycut from the market to edit and save it.
Click to expand...
Click to collapse
I've always used it and it does help. It has never broken my X. I don't know why why it doesn't work for you but I've used it on my old ERIS, Droid X, and my wifes DInc.
Sent from my DROIDX using XDA App
I'm in one of those areas AT&T got when Alltel got sold. I've got an Aria with 2.1 on it, and other than the fact I'm already running out of internal storage (no app2sd) I really dig it.
I like the Sense UI, I've used z4root and a freezer app to quiet the bloatware on it, and a battery lasts me at least a day with moderate use as a wifi+gps device.
I'm looking at either installing CM7 or Gene's Liberated 2.2.2 ROM, but I've got one question:
Currently AT&T hasn't actually extended service to my area even though they shipped the phone... I get "Simcard is not MM provisioned" (or similar) messages, and no service. Since I'm on campus most of the time with Wifi, I've been using the Aria as a wifi+gps device only. In late April or early May my current phone will supposedly stop getting service, and the Aria will automagically start working. Jokes about the competence of AT&T aside, what are the chances of this actually happening if I install CM or Liberated?
They communicate with your sim card not your phone.when att finishes the merge they'll authorise your sim card on the network.if you switch to cm7 make sure you write down your voicemail # first.its not in the rom like the liberated series.
Sent from my Liberty using XDA App
mtnlion said:
They communicate with your sim card not your phone.when att finishes the merge they'll authorise your sim card on the network.if you switch to cm7 make sure you write down your voicemail # first.its not in the rom like the liberated series.
Click to expand...
Click to collapse
Voicemail number is visible from Settings > Call settings > Call forwarding, just copy that number to voicemail number.
the answer is absolutely yes. They just activated mine. (just in case anyone stumbles across this).
It did take them nearly an hour from shutoff to activation, but oh well.
Yeah I live in south Dakota and was part of the transition too. Of course I tore into my phone before it was active by rooting and installing CM7.
When they finally activated it I didn't have any problems.
If you are tired of waiting for the transition to take place and would like to get your phone activated earlier then send me a message and I will let you know what I did to get mine working. Mine wasn't suppose to be active until the 19th of this month.
Sent from my Liberty using XDA App
Your voicemail number is just your own phone number.
Plasmamuffins said:
Your voicemail number is just your own phone number.
Click to expand...
Click to collapse
Yeah, that works too. It redirects to the actual voicemail number when you call yourself. I think the downside of putting your own number as your voicemail number is that when you dial voicemail your call log will say your own name instead of "Voicemail". Not a big deal though.
1. First buy a Straight Talk for walley world .com get the LG220.
(Its $45 with one month unlimited everything with free shipping.)
2.Then activate it .
3.Download the drivers for the Samsung Fascinate SCH-I500 making sure you get 32 bit or 64 bit which ever machine have it installed.
4.Download DFS you have to ativate the software though their site after you install it.
5.You will need to put the http://forum.xda-developers.com/showthread.php?t=1209992
6.Then dial **87284 put both options in modem mode
7.When plug the phone in it should tell you its found new hardware and ask for drivers
8.Then run DFS
9.Go manager in DFS your Samsung Fascinate SCH-I500 should show up select it
(sometimes you need to put the phone in dial mode dial **33284 then enter 000000 in the block for SPC)I think.
10.Then you will need the password to unlock the SCH-I500 its a 16 digit number you can find it online
11.Enter it in the PWD block at the top of DFS program it will tell you its unlocked.
12.Then read the phone write the ESN down just in case want put back.
13.Then enter the 20 digit number that on your straight talk green card enter it in the MIED block
14.Hit write it will do it real quick
15.Then hit reset from the reset from DFS
16.OK to active it might try to dial Verizon if activate and the Emergency buttons are at the bottom hit the Emergency *#83786633 then dial *22890 it will program
17.OK then dial *22891 to update roaming
18.Set up a gmail account then market and the internet will work.
Good luck
Modman72
Factory Data Reset
You have hit *#22745927 then enter 000000 in the SPC code to enable the hidden menu's
Before you dial *22890 to activate dial *#7780#-Factory Data Reset you will lose your apps but it will fix alot of problems like not getting 3G or not be able to surf!!!
Hey, I followed your instructions exactly, but in the end my phone only has texting capability, no calling or data. What's wrong?
Nevermind, I got it. It wasn't activating right, now everything works great! Awesome tutorial, thanks much!
Nice work, but I have two NooB questions:
1 will this work on a fascinate with a bad ESN, or blacklisted ESN on Verizon.
2. What is DFS "Download DFS you have to ativate the software though their site after you install it."
Thanks!
jesgrew said:
Nice work, but I have two NooB questions:
1 will this work on a fascinate with a bad ESN, or blacklisted ESN on Verizon.
2. What is DFS "Download DFS you have to ativate the software though their site after you install it."
Thanks!
Click to expand...
Click to collapse
When you write the MEID from the ST phone to your Fascinate, it'll change the ESN too. DFS is the program you'll need to change the MEID, this video ( www[DOT]youtube[DOT]com/watch?v=bOC13wkGlvQ ) will show you how and you can get the software for $10 bucks from that guy.
NickWhit1992 said:
Nevermind, I got it. It wasn't activating right, now everything works great! Awesome tutorial, thanks much!
Click to expand...
Click to collapse
How did u get it to work im having the same issue only being able to text but not call or web.
When mine was doing that, it was cuz it wasn't reaching the Verizon activation servers because I did it about 1230 am Central time, and their servers go down for maintenance then. Try it in the middle of the day. Also, are you using an MEID from a deactivated phone? It can't be activated until AFTER you write it to the Fascinate. And also, you need an Unlimited Plan, or it won't work right.
Sent from my Straight Talk Fascinate using xda premium
password to unlock the SCH-I500?
hi i just got a Samsung Fascinate from a friend, and i want to flash it to straight talk but i don't understand what you mean by find a password to unlock the SCH-I500, could you help me please and thank you!
2010031619780721
I actually thought about doing this, but then I looked at straight talks coverage map and quickly
changed my mind lol
Sent from my Glitched MIUI Fascinate
Eris _2.1_2010 said:
I actually thought about doing this, but then I looked at straight talks coverage map and quickly
changed my mind lol
Sent from my Glitched MIUI Fascinate
Click to expand...
Click to collapse
Straight Talk uses the Verizon network for CDMA phones. My coverage map says I should have no connection most of the places I am, because I'm out in the country, but I have yet to find somewhere I don't have a signal, and 3G as well. Only thing is, I got kinda careless with my 3G usage, and ST called to warn me if I kept using so much they would throttle or completely cut off my data. I used several GB of data before I got that call though.
Still having problems flashing
I followed all of the above instructions and have tried the whole process a few times. All I can do is send and receive text msgs. and receive calls. I cannot make calls or use data. Any help please?
Possible for sprint.?
Can this method be modified to be used on Sprints network? I have a epic 4g donor phone and unlimited plan
so i have a verizon samsung galaxy s sch-i500 and I have done everything here, but i still get a verizon error message..... do I have to pay for that DFS program inorder to get my phone unlocked? dfs said my phone is $35, but Im able to log into it with the app in demo mode and by selecting the proper comm port.. and I have the password for the phone.. but when I change the MEID or IMEI id with dfs or in service mode(**772) , it still shows up as the old MEID when i press*#06# ...?
what do i do? thanks
Warnold66: your phone didn't activate properly. Dial the activation number again.
Camrock: this method should work with any CDMA provider, dunno what Sprint is though.
Lazerman00769, I posted the URL to a YouTube video in one of my above posts. Follow that video, and you'll have no problems. That's how I did my phone.
Sent from my Straight Talk Fascinate
I.looked at their coverage map and it looks horrible. Can anyone that travels confirm they get good data service with straight talk?
Sent from my Droid Charge 4G running Humble 2.3.5 Gingerbread
Sprint CDMA
NickWhit1992 said:
Warnold66: your phone didn't activate properly. Dial the activation number again.
Camrock: this method should work with any CDMA provider, dunno what Sprint is though.
Lazerman00769, I posted the URL to a YouTube video in one of my above posts. Follow that video, and you'll have no problems. That's how I did my phone.
Sent from my Straight Talk Fascinate
Click to expand...
Click to collapse
Sprint is CDMA. I am wondering if i would use the ESN of my Epic 4g? would i need to deactivate my Epic 4g first, and how? Thanks
ok I have the same problem as "warnold66" him and I did the same thing and got the same problems.. All I can do is send and receive text msgs. and receive calls. I cannot make calls or use data.....
I followed that Link that u posted and still I have the same problem. When I type code *#06# I still get the old MEID.. even after I changed it with DFS?... but when I use DFS I get the new MEID?
Please help.. this sux
Do I need to just flash my phone to a new fireware & rom?
ok so now I know how to bypass the verizon activation, and did so.... ive rooted and superuser access... ive used DFS to change my MEID, I did the factory restore, ive used *22890 & * 22891.... and still I can only do texting and get calls.... no web or making calls?
hey everyone, i think this is only my second post. Heres what im up to
have VM/Assurance Wireless on Kyocera Jax. Have and older HTC Evo i used on Sprint but hasnt been connected to their network for like a year
Im trying to swap out all the info so i can basically use the Evo instead of the Jax
I have cdma worshop, qxdp, etc
Problem is with getting the required info off of the donor phone, the Kyocera Jax. It seems that Virgin disables the usb data connection before shipping. You connect the phone with usb to a computer, and nothing happens. Device Manager doesnt even show a port. So like i said, it seems well known that Virgin disables their cheaper phones usb data connection
Ive tried unlocking the Kyocera by pressing 1111111, then hitting service. It asks for a password, most likely the spc/msl. However, people are saying these phones dont even have an spc/msl to avoid doing what im trying to do.
did write down a code from when i activated the phone, and it might be of use ##847446#
This allowed me to get into programming, but there was no option to allow data to the usb or anything else like that, it just shows me the MDN and MSID
The ##847446# code does not work when you hit 111111 and go to service when it asks for security code
It only works when you are dialing a number like you normally would
Whats the deal?
How can I activate the usb data port? What can i do to get info off the phone in order to switch over to the Evo if CDMA Workshop and Device Manager arent even showing any activity when the phone is connected via usb to the computer????
well i called Virgin trying to get an msl...they said they dont have them, that Kyocera has the msl. Went to the Kyocera site, it said to contact Virgin. Ugh. So nobody wants to give up the msl.
Virgin DOES disable the usb data connection on these phones. How do I enable it???
I cant really do this until i can get the info i need from the donor Kyocera phone...it has a usb connection but they disable it so you cant do **** like this i guess
I just want to use talk and text on my Evo by switchng the info from the Kyocera Virgin gave me with the Evo ,i do NOT care about data or 3g
still working on this one
I am not sure about Virgin but with Boost to get talk and text working you only need meid, mdn, and msid, then make the phone OTA program. As I said I do not know if it will work the same for Virgin as it does Boost but since they are on the same towers anyways I imagine not alot of settings should have to be changed. Hope this helps!
thanks mate! Well i have the mdn and msid...and i think the meid is actually on the battery...so i may just be in business!!! i think today is the day!!!
things arent going that well
the only thing i need for an OTA is the msl from my Evo. I cant connect the phone to CDMA workshop because there is something funky with the HTC DIAG driver install. I have the inf to make it show as htc usb modem but when i try to update the driver in order for CDMA workshop to work it says theres no devices that meet that software need
my other try to get the msl was with a terminal emulator. this process did not work either
im now going to try to root my phone, never rooted, not sure what will happen, and then i can run the msl reader application in the play store
Did you press ##3424# before trying to read evo with cdma ws?
Sent from my PC36100 using xda premium
This is really becoming a nightmare. I cant tell you how many things ive had to download just to be able to root my phone, which is what ive decided to do in order to get my msl...after im rooted i will be able to use the msl reader from the app store.
ive never thought about rooting before, and im wondering if im going to lose all my data, such as contacts, everything. Will I? Im using the htcdev method and it may be easy to some of you but i swear all i do is see more and more links to files or programs i need to have first.
all i want is my msl
Called Sprint 1 to 5 times today trying to get my msl from them...but since the account has been cancelled for like a year due to payment, for some reason are unable to see the msl
They were more than happy to ask for an address to which they could send the bill for 250 bucks though
Klown80 said:
Did you press ##3424# before trying to read evo with cdma ws?
Sent from my PC36100 using xda premium
Click to expand...
Click to collapse
i did not! i shall try. probably what stumped me. After that ill keep tinkering. Thanks for being there klown!
im also new to the board so when i hit multiquote i thought that was to quote you in a reply so i think i need to delete like 5 multiquote mishaps
i cant really explain, it all happened so fast....the reason my HTC DIAG drivers were not working is because i didnt try the x86 option. I am now succesfully connected to CDMA workshop. Now to find the msl!!!!!! i should be able to find it with CDMA WOrkshop right?
edit WTF it says 0000 for spc
and there is an option to set it on or off. which do i choose? also an option to write it...just make it all zeros?
and should i still do ota or should i use cdma workshop? or use the virgin thread method?
got the correct spc from CDMA workshop. Now, when I open QPST, it doesnt even show my phone. Typed ##3424# before connecting, then connecting to CDMA workshop first, then opening QPST, but QPST will simply not read/see my phone. Are there specific drivers for QPST?
bonerstorm said:
got the correct spc from CDMA workshop. Now, when I open QPST, it doesnt even show my phone. Typed ##3424# before connecting, then connecting to CDMA workshop first, then opening QPST, but QPST will simply not read/see my phone. Are there specific drivers for QPST?
Click to expand...
Click to collapse
no, just connect it to the port your phone is on.
if you don't know the port, then you can find it through device manager, or you can just try connecting to ports in cdma until you find the right port, and then add the port in qpst
im now on the last step ....using this method
http://forum.xda-developers.com/showthread.php?p=30756751&posted=1#post30756751
if you go to the last page i have a few posts about whats going on. Ive come very far. Sadly this last step with QXDM is simply not working... can verify that the meid is now cleared out...what i cant do is write the new/correct meid
also, the method/thread over there doesnt say anything about that three letter word that starts with an E
bonerstorm said:
im now on the last step ....using this method
http://forum.xda-developers.com/showthread.php?p=30756751&posted=1#post30756751
if you go to the last page i have a few posts about whats going on. Ive come very far. Sadly this last step with QXDM is simply not working... can verify that the meid is now cleared out...what i cant do is write the new/correct meid
also, the method/thread over there doesnt say anything about that three letter word that starts with an E
Click to expand...
Click to collapse
that gets populated automatically when you enter the meid
thanks again for all the help mike and klown and everyone!!!!
oay heres where im at now...currently connected to cdma and have verified MEID and the "E something something" have been changed correctly!!!!!!!!!
now the question is, do i just unplug the phone and try to make a call? Reboot the phone? Save it all to a file and load that at startup or something?
Or is this pretty much it?
I have a feeling the meid and e something something will zero out again as soon as i disconnect from the computer.
Also, i followed all the steps properly...and was never prompted to enter any MDN or MSID data...so that data has not been applied. Does it need to be??
edi wait wait....my DIAG TX for e something something reads all zeroes, while the DIAG RX is correct. The RX and TX are the same for the meid
okay the big moment has arrived...just restarted it waiting to boot...and i found out i needed to # my msl then change the mdn and msid. fingers crossed
errr im getting an error 16
alright i get an error 16 when i call out, i guess is from Sprint? I cant have them reset anything because my account has been inactive for like a year.
i can receive calls oddly...the phone lights up for a second then goes dark....but the phone sure does tell me that i missed a call
just tried texting to the phone, nothing yet. I thought i could use sms but maybe the evo only uses mms???
Not sure if it is the same on VM as it is on Boost, but to fix the error 16, just log in to your acct online and look for an option to update handsets. Simply swap out handsets then swap right back, that is the quickest way to fix error 16 with Boost, maybe it will work with VM?
bonerstorm said:
alright i get an error 16 when i call out, i guess is from Sprint? I cant have them reset anything because my account has been inactive for like a year.
i can receive calls oddly...the phone lights up for a second then goes dark....but the phone sure does tell me that i missed a call
just tried texting to the phone, nothing yet. I thought i could use sms but maybe the evo only uses mms???
Click to expand...
Click to collapse
error 16 isn't a really big deal, it means that you had both phones on at the same time. What you should do is take the battery out of your kyocera and never turn it on again.
I got error 16 as well the first time I flashed, I had the phone turned off but with the battery still in it and got the error.
Error 16 is easy to fix follow this forum post http://forum.xda-developers.com/showthread.php?t=1290906
Inside of that post will be a phone number to call to reach sprints "Error 16 Call Center" they'll ask you some questions about YOUR VIRGIN MOBILE INFORMATION, your account name, what kind of phone you have, yada yada yada. Just give them all your information, but only for your KYOCERA and VIRGIN account, don't mention that you flashed your phone or anything, just give them the info from your account and from your kyocera phone.
They'll get you working within, like, 20 seconds.
It's not like boost where you can fix it on the website.
Thanks for sharing your trial and error on this! I'm getting ready to try the same thing, except on a Samsung Galaxy SIII. I've got the Kyocera JAX that I'm pulling the information from but I would like to use the data functions as well (Assurance offers the Virgin Mobile unlimited everything for $30/mo, absolutely worth the money if it works). I rooted it first thing, then unlocked it and now I'm just trying to make sure I've got all of the info I need before I start making real changes on the Galaxy.
BTW - I've heard that Virgin does offer 4G data and I'd love to be able to access that since I won't be able to take advantage of the LTE capabilities of this really sweet piece of electronic indulgence. Any advice or information is gratefully accepted.
kyocera diag mode
get the msl from virgin. tell them you can reprogram your phone and if you cant your just thinking about changing to another carrier. if your a good customer they will give it up.
on the kyocera type ##3424# then enter your msl(spc) its 6 digits......
from there your phone will show usb/diag on off....
good luck trying to read it with anything. i tries a kona a coast and some other cheap phone and managed to get this far and connected etc but they will not read.
Good luck. if you figure something out let me know