Related
I have a bluetooth headset working fine for calls, however have 2 questions. Has anyone gotten the headset working for things other than calls, such as media player? Also I have a problem with answering the phone with bluetooth turned off, if I turn it on while on the call and give it a minute to sync with headset and then try to transfer the call to the headset it won't work. But if I hang up and call right back the bluetooth will work.
I have the same problem but regrettably no answer: ( :? :? :?
bleuthooth headset
hello i have the bt g2 it s only 12 gramms and its works fine with my mda 2
You can listen media player with your headset ????
Without specific manipulation??? Not possible
:shock: :shock:
Hi every1!
Actually, until someone (HTC, Micro$oft, or anyone else) comes out with a new Bluetooth stack that support the full Handsfree profile, (something any BT equipped mobile phone already does) there is NO other use of headphones.
Even the more simple functions are not implemented.
I think this is the worst part of the Himalayas right now. A wonderfull piece of hardware, but very poor phone functions.... to say the least.
BT6023
This is the BT Handsfree that Im using now. So far so good. No connection failure.
Handsfree?
Hi nelsonlye!
Sorry to say, but, This is not a headset?
Could you be more specific on the brand and model and the "handsfree" functions it supports?
Does it allow Voice Dial or any other voice input?
It looks like a conventional headset, so if no other functions are implemented, it IS a headset, NOT a handsfree device.
Furthermore, until HTC or Microsoft release a new Bluetooth stack, looks like no new functions will be available. And it seems it will take forever!
Regards.
Hi all,
Just a quick (and probably stupid) question. I have the O2 mini and find the loudspeaker rather poor. When using the GPS it is often hard to hear the instructions. Is it possible to send the audio to a bluetooth headset, or even a bluetooth car kit.
I am new to all this so any help would be greatly appreciated.
Adam
Adam,
if you are connecting the GPS via BT, it is not possible in the first place to connect a second device in parallel. Unfortunately you can have just one BT connection at a time.
Even with a cable connected GPS it won't work, because it is not possible to use the BT handset as a audio device.
So, no, what you are trying to do is most probable not possible. I am doing it like that, that I use a BT GPS receiver and a cable headset if I do not understand the voices correctly. This way, you get the instructions and you can even make a call without using the loudspeaker.
rgds
Marco
Thanks for the advice marco. Much appreciated. Will just have to stick with the cable headset.
Bluetooth and GPS and Headset can work
Have to disagree with Marco99. I use a Navman 4420 Bluetooth GPS unit and an O2 Bluetooth headset with my I-mate PDA2K (1.40 ROM 1.12 Radio). I use Destinator Software (The Navman SmartST is better at finding the optimum route, but it is buggy and always seems to need upgrading to use the latest ROM).
Anyway, I frequently have both devices paired.
Last weekend coming back from SA to Vic I had the Destinator humming along, and a phone call comes in. The phone screen pops up and I answer the phone using the headset button. I minimise the phone screen, and the Destinator screen re-emerges, still tracking nicely along the Glenelg Highway. You lose the Destinator voice prompts during the phone call, but not the GPS signals, nor the visual prompts.
After hanging up, again using the headset button, the Destinator voice prompts start again and away you go.
I have the HQ audio patch and a HP BT Headset. I must try that sometime with the Destinator. However, I do agree that you can't listen to the navigation software through the headset and answer the phone, only one audio connection can be made via Bluetooth.
Now, if they can fix the "Line of Sight only" B/T headset bug...
Can do BT GPS + Headset at the same time
Just to confirm, I have had my Tomtom v5 Bluetooth GPS & my cheap-n-cheerful "Abe" Bluetooth headset working concurrently. Tomtom mutes when the phone receives/makes a call, but otherwise all is working together 100%, you can make & receive phone calls OK.
Can also confirm this works with non-Tomtom BT GPS (Globalsat model).
Joe
Re: Can do BT GPS + Headset at the same time
joe2316 said:
Just to confirm, I have had my Tomtom v5 Bluetooth GPS & my cheap-n-cheerful "Abe" Bluetooth headset working concurrently. Tomtom mutes when the phone receives/makes a call, but otherwise all is working together 100%, you can make & receive phone calls OK.
Click to expand...
Click to collapse
Just to ensure:
You didn't get the voice commands out of tomtom in your bluetooth headset, or?
Stefan
Tomtom5 & BT headset
No Stefan, Tomtom displays a "Mute" icon, so no sounds come from it. Only the voice call is transmitted to the headset
Joe
Re: Tomtom5 & BT headset
joe2316 said:
No Stefan, Tomtom displays a "Mute" icon, so no sounds come from it. Only the voice call is transmitted to the headset
Joe
Click to expand...
Click to collapse
I can confirm that 100% :roll:
Re: Bluetooth and GPS and Headset can work
Camstech said:
Have to disagree with Marco99.
Click to expand...
Click to collapse
I have to agree with camstech! I was not aware that this really is working, did not believe it and just tried it. And it works exactly as described. So, one new thing learned. As the protocol does not explain the behavior, it looks like the (otherwise crappy) bluetooth stack is quite inteligent here, and switches between different devices, so it looks both work in parallel. So, during my next roadtrip I can bring along my BT headset!
Anyway, unfortunately that does not solve your problem, Adam, as it is not possible to redirect the Navigation voice to your bluetooth headset, as long as the device (BT stack) does not support the appropriate BT profile.
regards
marco
EDIT: just checked the wikipedia entry http://en.wikipedia.org/wiki/Bluetooth. I must have dreamt about the single point connection with BT. Looks like a BT net (called piconet) can contain up to 8 devices, where one is working as master with up to 7 slaves. The details can be found in wikipedia. Maybe there is just connection per profile but I dont know for sure. Maybe there is a bluetooth expert here in the forum that could enlighten us. And possibly maybe, this is way to technical and all of you guys fall asleep during the first pragraph of my posting anyway ...
Can enyone tell me if it is possible and how??
I have a Parrot 3100 and works fine for calls but can't put it saying nothing that comes from TOMTOM.
I have a friend that one time he heard the tomtom on a head-set.
But only one time and never more.
He doesn't know how!
Can enyone help me?
seem to recall people saying it works if
gps is connected first and then headset
You need a bluetooth headset with AD2P proflie. The standard hards free profile will only route calls to the headset. That said, if you press the voice dial button on your headset when an instruction is being read out, you will hear it in the headset (once only) - probably what the friend experienced.
Hi. I use a piece of software with my standard bt handsfree.
Chartcross Bluetooth Audio Router
The sound quality isn't stunning, but it lets all sounds that usually come from the inbuilt speaker to go through the handsfree instead
Tryed Chartcross Bluetooth Audio Router on my Trinity WM6 using hands free car kit (Delta System)... When activated it switches off the car speakers (like when calls arrive) but sounds still are on the speaker of pda...
Do you thing it will be necessary a reg tweak?
THX
No idea sorry. I only got my Trinity 2 days ago. I was using a prophet before which worked fine with it. I'll let you know if i do find anything though
IN MY HAND-FREE car kit my tomtom turned off the radio and instructions in car speakers.
right now that doesn't happen.
Infortunately i've tried so many roms i don't know i used at that time, and how make car speakers work again. Any help?
I've spent days searching and trying all sorts of tweaks but I can't get anything to work. Can anyone PLEASE help!
I use Tomtom 7 and I've always sent the voice instructions to the bluetooth speaker in my bike helmet (just a handsfree paired item). I've previously done this on HTC devices with BTAudio and a one line registry tweak. Can anyone offer a solution to send all the audio to a bluetooth handsfree on the HD2?
I really hope someone can help, I've got the HD2 setup just right except for this last remaining item.
Many thanks,
i have the same problem...
@noony i think u have already enabled in bt setting the option "manage system audio in handsfree device" if u didnt...try that
for me doesnt work maybe its a headphone problem i see a sort of "fhhh" when any sound is played on phone but still come out from the speeker
another issue... every time i start a call with bt the volume is at the lower level..internal and headphone too! and the last is very strange because with my artemis didnt do
xardus said:
i have the same problem...
@noony i think u have already enabled in bt setting the option "manage system audio in handsfree device" if u didnt...try that
for me doesnt work maybe its a headphone problem i see a sort of "fhhh" when any sound is played on phone but still come out from the speeker
another issue... every time i start a call with bt the volume is at the lower level..internal and headphone too! and the last is very strange because with my artemis didnt do
Click to expand...
Click to collapse
Yes I've tried the "manage system audio in handsfree device" option. I can get some background noise on the headsets (I'm trying with a Scala Rider and Motorola 700 & 850) but I never manage to get any sound.
Can anyone please offer a solution? It's a big disappointment for me if this isn't possible. Any suggestions welcome, many thanks.
My Observations
I pared it with my BMW and for the life of me cant ger any audio (music) over bluetooth ( the phone works fine) I then tried it on a $20 bluetooth earpiece I ocassionally use for the phone and guess what I can play music over it fine.
I tried and tried again in the car but could not get it to work.
I think some bluetooth devices will not work. Is there a different specifiaation for bluetooth ir BT1 and BT2 ??
I havent checked into this yet.....
Fadetogrey said:
I pared it with my BMW and for the life of me cant ger any audio (music) over bluetooth ( the phone works fine) I then tried it on a $20 bluetooth earpiece I ocassionally use for the phone and guess what I can play music over it fine.
I tried and tried again in the car but could not get it to work.
I think some bluetooth devices will not work. Is there a different specifiaation for bluetooth ir BT1 and BT2 ??
I havent checked into this yet.....
Click to expand...
Click to collapse
It gives me some hope that you've got it to work with one bluetooth device. Can you please let me know exactly what you did to get the $20 bluetooth earpiece to work?
Thanks,
yeah that was my idea but without a stereo bt device i cant try to myself...i ordered to vodafone one with some of my tons of points...3 weeks and no answer!
I had the same issue and on my old phone, the HTC Touch HD, I used the following program to my satisfaction:
BTAudio
On my HTC HD2 however this doesn't seem to work anymore. :-(
it does the same thing of the inbuild bt option on hd2 its just a "quick link" to place on the bar
anyone of u have any problem with bt device volume? before i have an Artemis and 3 different device i used the device volume was every time the one i choose...now every time a new call starts phone volume its right but device volume jump to minimum level and every time i have to press + button like as i'm playing videopoker to dont miss fist seconds of a conversation
Works fine with Jabra 3030, all audio over it, music, system sounds and calls.
Maybe it's only working for bluetooth devices that are setup as stereo. Can anyone please offer a solution here?
I've installed a 6.5 rom (dutty v7 - thank you) on my HD and after a sprite restore (level 2) bluetooth audio divert works fine. Although I notived that the bluetooth options remained the old settings (possibly due to my backup restore) and the divert was done using the BTAudio. Sorry to keep asking but if anyone can shed light on this.
Is it possible to tweak the HD2 so that audio can be sent to any bluetooth headset/handsfree or is there some hardware limitation that stops this from being done?
I've tried every app and tweak that I can think of! Please can anyone help, even iof it's to let me know why this can't be done.
Thanks,
its what we all are trying to do......now i think its only a bt device problem...if it support bt2.1 and a2dp with edr seems to work all good....
i solved in car with headphone in the box...but bluetooth should be much and much better without any cable that always have to remove nodes (its the right word? sorry if not hehe)
I'm connecting to my HD2 using Jabra Stone, an A2DP headset. When I selected the stereo headset profile on the HD2, it redirected all system sounds to the headset: reminders, SMS alert, soundtrack for videos, audio player....except phone ring. I used BT Audio over a non-A2DP headset before with Diamond2, but the ausio is very poor, and the connection drops very often. Since I changed to A2DP headsets, the Diamond2 and HD2 supports it out of the box - no hack needed.
So look for A2DP headsets if you want to redirect audio.
Thank you to everyone that has helped with replies. I've now got my answer. If the bluetooth device supports A2DP then it works! (just won't work with mono etc)
I've now tested my HD2 with over a dozen bluetooth devices ALL A2DP enabled headsets regardless of if they are cheap or expensive!
Thanks again for everyone taking the time to help.
I have an LG HBM-220 bluetooth and cannot put audio to in, only phone calls!
How can i manage to do it?
I blame it on the stupid Widcomm Bluetooth stack... If the HD2 used the better MS stack, BT would play nice with with more of our periphirals and apps
I can't use MSVC properly with BT either....
the solution is to go to the bluetooth settings, select your device and connect the stereo audio connection.
Way back, Microsoft decreed that ONLY the phone app could use a mono BlueTooth headset, although any audio could be redirected to a stereo A2DP headset.
In order to get around this you need to fudge the sytem with something like BTAudio or TekSoft's BlueAudio.
The latter worked on my XDA Orbits (1 and 2) but does not work on my Touch HD with Dutty's R6 ROM (WM 6.5) possibly because BlueAudio requires the Microsoft BlueTooth stack and I suspect Dutty's ROM has the Widcomm stack. But I could be wrong about that.
BTAudio sort of works on my Touch HD, but outgoing audio is speeded up like I've been breathing Helium.
So no current solution to yet another idiotic gotcha from Microsoft.
Noony said:
Thank you to everyone that has helped with replies. I've now got my answer. If the bluetooth device supports A2DP then it works! (just won't work with mono etc)
I've now tested my HD2 with over a dozen bluetooth devices ALL A2DP enabled headsets regardless of if they are cheap or expensive!
Thanks again for everyone taking the time to help.
Click to expand...
Click to collapse
Hmmm. When I conect via gprs to youtube aps I can hear the voice in my mono headset (jabra 2020) but via wifi and computer as modem voice is only in phone speaker. So maybe we should look gprs or youtube aps reg tweek.
Guys
i have a nokia HB-100 headset and i'm experiencing all kinds of strange behavours
sometimes system sounds including music ...etc get directed to the headset and some other time it just directs calls no matter how hard i try thru soft resets or unchecking then checking the "play system sounds ..." option!
very strange, any insights about this? is there a tweak to go with or is it a known WM defect?
Ok, I have the T-Mobile Tab, I have Skype and Google Voice working via 3G and Wifi but here is the issue...
I have tried 4 different wireless bluetooth headsets and they all react the same... They connect and pair with no issues BUT...
When you place a call the other callers voice is routed, as it should be, to the BT headset, however, my voice is not routed through the BT microphone and it uses the Tab's built in mic...
This is pretty unacceptable as you can imagine and pretty much defeats the purpose of a BT headset...
Any ideas, thoughts, or help on how to get the Tab to route voice via the BT headset as opposed to it's built in mic would be MUCH appreciated!!!!
Thanks in advance!
This was kind of discussed in another thread. Current thinking is that they modified the profile to not support a mic on the BT headset.
Until someone creates a patch, update or a custom rom, there probably won't be a solution.
This is the price we pay for getting the new toys right away. Once the dev's start rolling out the mods, I am sure it will be corrected.
dougvan said:
This was kind of discussed in another thread. Current thinking is that they modified the profile to not support a mic on the BT headset.
Click to expand...
Click to collapse
Whilst this may be true for US Tabs, FWIW bluetooth headset profiles do not work with Skype on Euro Tabs either.
I've been trying it out this afternoon, and whilst my headset (well, wristset to be totally accurate) works fine for regular cellular calls, when I try to use Skype I only get audio out.
If I check the options for the connected device in the bluetooth settings, I have both Media and Phone profiles checked. If I uncheck Media, I no longer even get audio out with Skype (though regular phone calls still work ok on the headset), which shows that Skype is not using the Phone profile at all.
So, I suggest you look at the options for your bluetooth device to see if it even has the option for Phone. If it does, it seems that the headset profile is still there and it is actually Skype which is not using it.
Regards,
Dave
If you read some of the comments here, it seems that Skype for Android doesn't support bluetooth anyway.
Regards,
Dave
Thanks for the info man. I'll check it out on my Sprint GT.
Wonder if it's possible to put the Samsung Galaxy S BT on the Tab?
It is because the sound of these apps is being routed via the A2DP profile and not Headset provide is you are hearing the sound via the BT headset but the mic used is the Tab's
clubtech said:
It is because the sound of these apps is being routed via the A2DP profile and not Headset provide is you are hearing the sound via the BT headset but the mic used is the Tab's
Click to expand...
Click to collapse
Should I try a BT without A2DP support??
Thanks in advance!
raqball said:
Should I try a BT without A2DP support??
Thanks in advance!
Click to expand...
Click to collapse
Since my headset didn't work with Skype at all with the Phone profile awhen I switched of the Media (A2DP) profile, I doubt a non-A2DP headset will help.
The problem is Skype doesn't use the phone profile.
Regards,
Dave
I dont think its limited to skype either. I tried two other programs last night, neither one had working mic.
Sent from my SGH-T849 using XDA App
BT works just fine within Skype when using it on my MacBook Pro and my iMac.... The only issues I am having is on the Tab...
I wonder if it would be possible to flash or install the euro BT .apk?
raqball said:
I wonder if it would be possible to flash or install the euro BT .apk?
Click to expand...
Click to collapse
Why? Still won't work because the problem is with Skype on Android - it does not use the phone BT profile.
Regards,
Dave
No BT Headset Profile in any of the US Galaxy Tabs
The reason that none of can use their Bluetooth headsets with a program like Skype (or better yet, Line2, which I am a beta tester for) is that the Amrican carriers ripped out the ability to use BT Headset profile. Now some headset (such as te Jabra Stone) uses Audio profile, so it will work with the GalaxyTab, but we definitely need someone to break that an hack in a great fix so that we can get Line2, install it on the Tab, then us Bluetooth Headsets to do our communcating. This because the best (and cheapest) phone/data device in the world at that point. Is anyone working on that?
samtrego said:
The reason that none of can use their Bluetooth headsets with a program like Skype (or better yet, Line2, which I am a beta tester for) is that the Amrican carriers ripped out the ability to use BT Headset profile. Now some headset (such as te Jabra Stone) uses Audio profile, so it will work with the GalaxyTab, but we definitely need someone to break that an hack in a great fix so that we can get Line2, install it on the Tab, then us Bluetooth Headsets to do our communcating. This because the best (and cheapest) phone/data device in the world at that point. Is anyone working on that?
Click to expand...
Click to collapse
Interesting. I am going to pick up a Jabra Stone and see if it works with Skype on the Tab.
Posted from Samsung Galaxy Tab
raqball said:
Interesting. I am going to pick up a Jabra Stone and see if it works with Skype on the Tab.
Posted from Samsung Galaxy Tab
Click to expand...
Click to collapse
Jabra Stone does not work either. Just returned it for a refund.
Posted from Samsung Galaxy Tab
I have the nokia bt503 for a2dp. you need to long press to see option after its connected
Also works with nokia bh-104 but no a2dp and kenwood DNX6160 no a2dp
Dont know if this helps but...
Im able to use my Motorola BT S9 head set as headphones and make Unlocked Skype 3g calls no problem. US Sprint version.
dykefish said:
Dont know if this helps but...
Im able to use my Motorola BT S9 head set as headphones and make Unlocked Skype 3g calls no problem. US Sprint version.
Click to expand...
Click to collapse
And these headphones have a mic built into them? And that mic worked for your Skype calls?