Related
hi guys..
please help me .. i flash my HTC HD2 with a MAGDLR111 and after it doesnt continue to boot and only stock in boot image. i try to use Hard Reset (holding down the up and down botton and tapping the power button), it response very quick but it says the "restore completed and press up botton to reboot" and so i did but still, it still stock up in boot image forever.. please help me, what should i do..thanks
Possibly a radio problem. Boot pressing volume down button to get into bootloader and flash a radio WITHOUT .51. in its name....
Sent from my Nexus One using XDA App
thanks, already did... and it works.. )))
hey i have that same problem now can you help me get a radio so i can download it or can even help me through the steps to get back my phone to normal plzzz.? thank you
Any new user most definitely has a lot of questions...
Here is a thread you should carefully check - it explains some basic stuff, and it offers links to many other specific threads, incl. Radio ROM.
To return to "normal" ROM, please just check the standard flashing process. You can flash via USB or SD card, whatever ROM you like, stock or custom.
Hey man thanks for all that but i really don't want just any rom, i wanna know if anyone can get me the rom that comes with the phone for windows mobile 6.5, you know with the orange load screen etc, i really dummy in this thing and i should not of even played fast to go try flashing my HTC HD2 with a MAGDLR111.
so i've tried various roms and everyone of them was going great unitl step 2 in the upgrade process, it kept saying error filr open, check update rom utility. where do i go from here?
It is quite difficult to help if there is so little basic information available.
The error you mention can have a simple reason. Usually, the ROM image file name is simply not correct.
To flash via USB:
There are 2 options:
First, you can take an original RUU of your network operator (in case you have a branded phone) or HTC, put the phone into boot loader mode (see below), start the RUU.exe on your PC.
Second, you can extract the original RUU.exe with WinRar or a similar program, take the .nbh file and rename it to leoimg.nbh.
Once you take an image of the ROM, you have to put it into the very same folder where your ROM update software is (LeoCustomRUU, SSPL, whatever). One more time, please check the suffix, it should be .nbh, as in "leoimg.nbh".
Keep in mind: Do start the RUU software as "Admin" - whichever you choose.
Instead of the original ROM, you can flash custom ROMs, too - since your device must have HSPL installed when you used WP7 or Android before.
If you´ve got issues (because of Win 7 on your PC or such), please try to put your device into bootloader mode before connectint it to the PC (turn off the device, push vol. down and power at the same time, the multi color bootscreen should appear, only now connect it to the PC).
To flash via SD card:
Re-format your SD card FAT32. Don´t put anything else on it. Copy the ROM image file with the exact naming as above on the SD card.
To start the flash process, do the same as above, go into bootloader mode, the flash process will start - just follow the on-screen instructions.
i have this same problem only it happened without me flashing anything or something like that. i dont have custom rom or hspl. everything is stock. what should i do?
bump ^^
The message you have entered is too short. Please lengthen your message to at least 10 characters.
Hello Everyone.
TBH im my opinion you guys are my last hope to fixing my hd2.
So here's the problem.
I have a HD2 that turns on but does not have a functioning touc screen.
ABOUT MY PHONE:
HTS HD2
Has old android in it ( I dont know which one it is, but i can describe it. It starts up with a BootLoader asking to boot android, so i have the option to press yes or no. It has old blue theme in the background.
Here's the problem. I've called HTC support and i learn my phone still has manufacturers warranty. So basically i can just send in the phone, and ill id have to pay is shipping. BUT! here's the problem. HTC does not approve of third party software installed in the phone, in my case it is the ANDROID. So now im trying to wipe android put, and install windows mobile again. I downloaded the t-mobile stock rom and when i plug in my phone, the windows mobile center automatically pops out but it shows an error symbol.
TL;DR
So my question to you guys is how do i remove Android and install Windows Mobile on an HTC HD2 with a non working screen
Thank you so much guys for even considering to help me
Mod if i posted on the wrong section could you please move it for me.
Thanks
hi,
try this:
http://forum.xda-developers.com/showthread.php?t=956715
Thanks so Much But here's an update
I went ahead and downoaded the HSPL3
I turned on my phone and also pressing the voulme down button which brought to me to a red green and white color. I had my phon conneceted to the computer VIA USB. I first double clicked the T-Mobile rom update thingy and went ahead accpeted the warning signs etc,so the first thing that came up was identifying phone, and after 5 seconds it disappears so nothing came fro that, then later i double clicked the HSPL3 which asked me to either pick the 2.8 or the the 2.8 spl i believe, i had the spl installed so i wen ahead clicked the 2.8. it installed and my phone rbooted and BAM my touch screen worked, and when it asked to boot android i pressed NO. my phone rebooted and iagain the boot loader came up and asked to bott android, so this time i pressed BUt it didnt work because the touch screen stopped working!
So i went ahead to try everything all over but this time i clicked the 2.8 spl and after a minute on my phone it displayed " we hacked it" etc etc etc, i robooted my phone, ad it worked, i turned it on and off twice and it worked i was using my phone after a month So after playing with it alittle bit i decided to put my sim card in it. I turned off the phone and put the Sim card and turned on the phone so i can use it but.....once again the touch screen stopped working... ****!!!!!!
yep, now the touchscreen is once again not working
bump bumpity bump
fusion1204 said:
bump bumpity bump
Click to expand...
Click to collapse
Download a stock WM ROM for your phone, extract and rename your .nbh to leoimg.nbh. Transfer leoimg.nbh. to your SDcard.....enter bootloader mode....there it will flash back to your WM ROM with all HSPL remove. Time to send back to Manufacturer for repair..
Okay hold on. So when you see stock WM ROM coud that be the "T-Mobile_HD2_MR_Software_311...." file? and where can i find my .nbh file?
fusion1204 said:
Okay hold on. So when you see stock WM ROM coud that be the "T-Mobile_HD2_MR_Software_311...." file? and where can i find my .nbh file?
Click to expand...
Click to collapse
extract that from your .exe file.
Stock ROM can be found here
http://forum.xda-developers.com/showthread.php?t=655653
Make sure you use the Stock ROM specific for your phone, else you will brick your phone.
I went ahead and did that, but nothing changed did i do something wrong?
fusion1204 said:
I went ahead and did that, but nothing changed did i do something wrong?
Click to expand...
Click to collapse
Try following this guide....
http://forum.xda-developers.com/showthread.php?t=681317
10507 Thank you for the links but it didn't wok for me.
UGh!
Am i doing something woring? i mean i can get to the screen where it shows the foru colors, i guess that would be flashing and once i get there i can't do anything else the only way for me to do anything while im on that screen is if i have it connected in with my computer, and also start runinng the HSPL program which switches from Hspl to a NON hspl vice versa.
I hope youre not tired of me lol!
please help me out with this stupid situation im in.
Thank you.
Bumpity bump please help me out
Hello all good people. My screen suddenly stoped working.. hardware buttons works fine but thats not enough on this phone.
I still have guaranty fortunately But with hardspl, CWM and a android nandrom installed i dont dear to send it in.. is there a way to remove everything? I mean so it will pass the most strickted serviceguy..
Hope anybody can help me and yes.. i've searched a lot for this solution with no luck :/
J.R.E said:
Hello all good people. My screen suddenly stoped working.. hardware buttons works fine but thats not enough on this phone.
I still have guaranty fortunately But with hardspl, CWM and a android nandrom installed i dont dear to send it in.. is there a way to remove everything? I mean so it will pass the most strickted serviceguy..
Hope anybody can help me and yes.. i've searched a lot for this solution with no luck :/
Click to expand...
Click to collapse
Download the stock Windows Mobile ROM for your particular device (TMOUS, Telestra, etc.) and rename the ruu_signed.nbh to LEO_IMG.nbh and put it on an sd card of 4gb or less. Put the sd card in your HD2 and power it on while holding the volume down (vol -) button the entire time it's starting until you enter into bootloader (tri-color screen). The leo_img.nbh should be detected shortly and then you will be prompted to press a certain button to flash the new ROM. Once it's done, you will have stock WM 6.5 and the stock bootloader back on your phone, ready to ship off for repairs.
Just make sure and find the correct stock ROM for your device, or you will be sorry. If you flash a EU ROM to a TMOUS HD2 for example, it will brick the device. Look in the HD2 Windows Mobile 6.5 stickies and you will surely find a link to stock ROMs to download.
Thank you Mr. huggs u made my night
No problem, glad I could help
okay you guys, i dont know if im posting in the right section or not.. but i figured it would be good to post in the general section.
i have a tmobile hd2... it wont boot. sometimes i get the tmo bootscreen and it gets stuck there, other times its unresponsive, and other times it vibrates seven times and the screen never turns on..
i just want to mae this thing functional again. is there any way i can bring this device back to stock? whether its with a windows rom, or android rom, i really dont care.. lol i just need help. anything would be greatly appreciated.
if you have wp7 on it...your problem is because of incompatible sd card..try another sd card and hard reset
GunbladeGriever said:
okay you guys, i dont know if im posting in the right section or not.. but i figured it would be good to post in the general section.
i have a tmobile hd2... it wont boot. sometimes i get the tmo bootscreen and it gets stuck there, other times its unresponsive, and other times it vibrates seven times and the screen never turns on..
i just want to mae this thing functional again. is there any way i can bring this device back to stock? whether its with a windows rom, or android rom, i really dont care.. lol i just need help. anything would be greatly appreciated.
Click to expand...
Click to collapse
Just thinking it could be a bad battery, but more info would be helpful.
Or check if battery pin is bent
Sent from my HTC HD2 with WP7.5/android miui using tapatalk
battery and pins are fine... th sd card was working before but now the phone seems to have been condemed.. any information you would need just feel free to ask, i dont really know what to tell you guys since i dont know whats wrong with it
I managed to get to the rgb screen.. I'm guessing hspl is installed, because it says hspl on the screen lol.. Any suggestions on what I should do from here?
Sent from my PG86100 using XDA App
that happened to my phone once. i thought my battery was fried or something, but it turned out that my pins were bent. works fine now.
if you can get to the RGB screen, your phone is still safe i believe. Try getting a compatible SD card and then try and flash another WP7 rom. Also make sure your HSPL is 2.08. Anything otherwise, won't boot also.
HSPL must be 2.08.... if any other version, WP7 wont boot... but most of problems in sdcard compatible
task 29, and reinstall hspl , than magdlr. also make sure of bad blocks.
okay, at first i tried an ruu that i got directly from tmo but it would always hang at 8%... then i ran the task 29 file and it went through 100%... im gonna let the battery charge for a little bit since i dont want anything else to go wrong... im going to search on how to install hspl and everything else.. im asuming that i need an sd card for this lol. thanks everyone for the help!
Please Help! After “123456 GoGoGo” the screen goes dark and reboots; endlessly.
Guys I’m having a similar problem. I had “XBmod-Yuki 2.1” loaded yet I was experiencing sporadic reboots.
I decided to re-flash using the SD card advice provided by XDA site. I purchased a new compatible SanDisk 16gb.
While following the XDA instructions to the letter, I completed the “Flash the ROM with DWI” step (w/ SD Removed) and my phone is now on an endless reboot loop. After “123456 GoGoGo” the screen goes dark and reboots; endlessly.
The phone is not bricked because I can still re-flash the TMO stock 3.14. Yet when I try again, after “123456 GoGoGo” the screen goes dark and reboots; endlessly.
I love Windows Phone 7.5 Mango and I must restore my phone to its glory…
Please help! What do I do to get pass this paralyzing issue???
insert card to phone and turn on with Volume Up + Down + Power together.... when white screen shows, follow instructions on screen...
Please Help! After “123456 GoGoGo” the screen goes dark and reboots; endlessly.
Thanks for the reply DXDY...
I tried what you suggested. The master reboot completed and the phone rebooted into the same endless reboot loop.
My steps have been to:
reflash stock 3.14; allow complete boot up
install magldar113_daf
delete mbr using magldr113
Enable 24MB extra memory in Magldr services
Flash the rom with DWI...
after i flash the rom it reboots in to the endless loop. it never completes a boot up cycle. Right after "123456 GoGoGo" the "tomobile "stick together" logo flashes and the phone reboots; endlessly...
I have tried different roms; exact same behavior...
it has to be something simple because, the phone is not bricked; I can still re-flash the TMO stock 3.14. The stock ROM works perfectly and my SD card (Sandisk 16gb class 4) still works perfectly also...
Any help you can provide is greatly appreciated...
only problem then is SDcard.... try boot without sdcard for test.....
Please Help! After “123456 GoGoGo” the screen goes dark and reboots; endlessly.
i have tried reflashing with the SD card in the device and with the SD card removed. Once before i was able to flash the either way (with or without - both ways worked before). Now immediatley after reboot the device enters endless reboot loop...
any help is appriciated...
try with NAND toolkit... http://forum.xda-developers.com/showpost.php?p=19931919&postcount=501
wipe NAND with Task29, check and install again HSPL 2.08
flash WM6.5
flash MAGLDR
after that flash WP7
dont know which other to advice you...
melcad Please Help! After “123456 GoGoGo” the screen goes dark and reboots; endless
what is task29? i understand the other items. i just need clarification on task29...
Task 29 formats the partition drive of your device where the ROM resides.
it's cleaning partition, removing any leftover junks thereby giving a fresh partition for the ROM to operate
Please Help! After “123456 GoGoGo” the screen goes dark and reboots; endlessly.
Wow, that did it! the task29 cleaned up the NAND as you said and allowed me to reflash WP7...
One last question; when updating WP7 using the cab sender method; may I remove the languages that i dont need from the RAR pack???
incompatible sd card....change and try again with another sd card
dont remove the language cabs...preferred to keep them in
Hello!
I am new here as you can see. this is not primary proplem anymore.
I installed XDAndroid GBX0C 2.3.7Build to my HTC balckstone and everything works well, but camera tells me "camera error; Cannot connect to camera."
is there any fix for that?`
and the other thing, when i boot phone it goes to win6.1 and i have to go settings etc. and boot it from haret.exe.
so am i done something wrong or something? Solved
So if somebody can help me i would be very pleased
Ps. And sorry my bad english, i just a finnish.
Edit: I try reinstall, i post is changes comes.
E: No changes, still not working.
EDIT!!!!
SO if someone can help me, place do it
E.
And this just happend, phone just stop working whit black screen.was have to took battery off, and then it took about 10-30min to boot to win again.
THIS IS PRIMARY PROPLEM.
AAAAND now it wont even start. stuck in "smart mobility"...
Please read post's for more information.
now i have tried flashing original rom from CPU and Storege card... both install it correctly and says everyting is ok, but still its stuck at "smart mobility" screen.
it wont even shot in the right corner that red text of versions etc.
so what's the solution to this proplem? i would be very pleased if some one could tell me how to fix my proplem. i know there is someone who know what i should do.
Could I solve this proplem if i unlock and install custom rom? just wondering if that would help?!
Hi,
"Smart Mobility" screen
I had that problem too, and did a hard-reset.
Hold Volume Up + Volume Down buttons (hold hard) and press Power switch until you see the warning sign to confirm a hard reset.
The system will do a re-flash of the original Windows Mobile ROM.
Start Android by running HaRET from Windows Mobile
Yes, you have to run HaRET.
You can make it simpler by making a short-cut in Windows Mobile Start Menu.
Tap and hold on HaRET until you see the Dialog Box to Cut, Copy, etc.
Tap Copy.
Go to Device-Windows-StartMenu, paste as a shortcut
These steps are in the Touch HD Manual. If you do not have one, download it from the HTC website.
chan.sk said:
Hi,
"Smart Mobility" screen
I had that problem too, and did a hard-reset.
Hold Volume Up + Volume Down buttons (hold hard) and press Power switch until you see the warning sign to confirm a hard reset.
The system will do a re-flash of the original Windows Mobile ROM.
Start Android by running HaRET from Windows Mobile
Yes, you have to run HaRET.
You can make it simpler by making a short-cut in Windows Mobile Start Menu.
Tap and hold on HaRET until you see the Dialog Box to Cut, Copy, etc.
Tap Copy.
Go to Device-Windows-StartMenu, paste as a shortcut
These steps are in the Touch HD Manual. If you do not have one, download it from the HTC website.
Click to expand...
Click to collapse
I have tried hard reset, but that didn't work, and tried to put original rom too, and nothing happened. I have 2 original roms
RUU_BlackStone_HTC_FIN_1.14.414.2_Radio_52.49a.25.26_1.09.25.14_Ship
RUU_BlackStone_HTC_FIN_1.56.414.0_Radio_52.62.25.34_1.13.25.24_Ship
but those didint work. i will try today againe. and then if it going to work i will put that haret to start menu.
I'll try that 1.14 first...
flashed that 1.4 rom and waited about an hour and nothing happend... i jsut did hard reset and wait againe if it gonna boot now...
i was thinking that should i put custom rom, coz if something went wrong whit the official?
I mean if there is something wrong in phones hard drive? like something wrong whit registery or something?
something that wont let win start. if there is, how i can fix that?
masentava said:
Hello!
I am new here as you can see. this is not primary proplem anymore.
I installed XDAndroid GBX0C 2.3.7Build to my HTC balckstone and everything works well, but camera tells me "camera error; Cannot connect to camera."
is there any fix for that?`
and the other thing, when i boot phone it goes to win6.1 and i have to go settings etc. and boot it from haret.exe.
so am i done something wrong or something? Solved
Click to expand...
Click to collapse
GBX0C2.3.7 Build is on SD card.
You will need to boot from Windows Mobile first, then run HaRET to reboot to XDAndroid.
If XDAndroid hangs, you need to remove battery, put back battery and power on. Then you see Windows Mobile and do above step again.
Always, from XDAndroid to go back to Windows, you need to Power Off, and then Power On again.
chan.sk said:
GBX0C2.3.7 Build is on SD card.
You will need to boot from Windows Mobile first, then run HaRET to reboot to XDAndroid.
If XDAndroid hangs, you need to remove battery, put back battery and power on. Then you see Windows Mobile and do above step again.
Always, from XDAndroid to go back to Windows, you need to Power Off, and then Power On again.
Click to expand...
Click to collapse
I undestood that... but thats not the proplem anymore coz windows wont start, its stuck in "smart mobility"
i tryed to flash original rom's bot that didint work....
so prolem is how do i get windows back to work?
now i have tried flashing original rom from CPU and Storege card... both install it correctly and says everyting is ok, but still its stuck at "smart mobility" screen.
it wont even shot in the right corner that red text of versions etc.
so what's the solution to this proplem? i would be very pleased if some one could tell me how to fix my proplem. i know there is someone who know what i should do.
masentava said:
I undestood that... but thats not the proplem anymore coz windows wont start, its stuck in "smart mobility"
i tryed to flash original rom's bot that didint work....
so prolem is how do i get windows back to work?
now i have tried flashing original rom from CPU and Storege card... both install it correctly and says everyting is ok, but still its stuck at "smart mobility" screen.
it wont even shot in the right corner that red text of versions etc.
so what's the solution to this proplem? i would be very pleased if some one could tell me how to fix my proplem. i know there is someone who know what i should do.
Click to expand...
Click to collapse
You say you are flashing the original ROM. You mean the original HTC Windows Mobile 6.1 ROM? I understand you can only get this done only from HTC authorized centers.
(800) stedntf
chan.sk said:
You say you are flashing the original ROM. You mean the original HTC Windows Mobile 6.1 ROM? I understand you can only get this done only from HTC authorized centers.
Click to expand...
Click to collapse
I have
This
RUU_BlackStone_HTC_FIN_1.14.414.2_Radio_52.49a.25.26_1.09.25.14_Ship
And this.
RUU_BlackStone_HTC_FIN_1.56.414.0_Radio_52.62.25.34_1.13.25.24_Ship
Blackstone/HD Links | Guides | Stickies | Roms | Read before posting
http://forum.xda-developers.com/showthread.php?t=999925
U have to install HTC USB Sync Drivers drivers
Put the phone into bootloader by pressing volume down + power button
plug the usb cable to the computer/laptop
and then run the shipped rom executable file... when the tricolor screen displays USB at the bottom.
else extract the RUU_signed.nbh or any file with .nbh extension from the shipped file with zip viewers like 7-zip
rename the file to BLACIMG.nbh
Put into the root of memory card
put the phone into bootloader and follow the screen instructions..
And the most important thing... search the forum.. before posting..
Hope this works for you
Hi there! I think that you can't reflash even a Original ROM without unlock the phone with new Hard-SPL from Olinex ,considering that you have tried a Hard Reset and nothing happened ,your last option is to unlock the phone and reflash the ship ROM ,or to flash a custom ROM ( is not a good solution if you still have warranty,but still you cand revert your stock SPL:good so ,you have nothing else to lose , all is left for you is to try what i said before . If you don't know how to do it,let me know and i will post the exact links to instructions.
Hi all,
You can try a NAND ROM like the new release of Fagyi. There is an easy step by step manual to installation. You will lose winmo, but you will have a real android.
It looks pretty and he has solved many of the issues of previous versions.
Regards
CristianCRS said:
Hi there! I think that you can't reflash even a Original ROM without unlock the phone with new Hard-SPL from Olinex ,considering that you have tried a Hard Reset and nothing happened ,your last option is to unlock the phone and reflash the ship ROM ,or to flash a custom ROM ( is not a good solution if you still have warranty,but still you cand revert your stock SPL:good so ,you have nothing else to lose , all is left for you is to try what i said before . If you don't know how to do it,let me know and i will post the exact links to instructions.
Click to expand...
Click to collapse
well, maybe i will try to unlock, i looked some instruction, aaand didint understood
So if there is quide to dummiest dummies, so i think that would help me!
But thx to all answers!
Do a Search and read the posts
masentava said:
well, maybe i will try to unlock, i looked some instruction, aaand didint understood
So if there is quide to dummiest dummies, so i think that would help me!
But thx to all answers!
Click to expand...
Click to collapse
You need to understand what you are going to do or you may end up with a phone that does not work anymore.
Do a search of the forum and read the posts. There are so many.
http://forum.xda-developers.com/sitesearch.php?q=unlock blackstone