Related
Hello Everyone.
TBH im my opinion you guys are my last hope to fixing my hd2.
So here's the problem.
I have a HD2 that turns on but does not have a functioning touc screen.
ABOUT MY PHONE:
HTS HD2
Has old android in it ( I dont know which one it is, but i can describe it. It starts up with a BootLoader asking to boot android, so i have the option to press yes or no. It has old blue theme in the background.
Here's the problem. I've called HTC support and i learn my phone still has manufacturers warranty. So basically i can just send in the phone, and ill id have to pay is shipping. BUT! here's the problem. HTC does not approve of third party software installed in the phone, in my case it is the ANDROID. So now im trying to wipe android put, and install windows mobile again. I downloaded the t-mobile stock rom and when i plug in my phone, the windows mobile center automatically pops out but it shows an error symbol.
TL;DR
So my question to you guys is how do i remove Android and install Windows Mobile on an HTC HD2 with a non working screen
Thank you so much guys for even considering to help me
Mod if i posted on the wrong section could you please move it for me.
Thanks
hi,
try this:
http://forum.xda-developers.com/showthread.php?t=956715
Thanks so Much But here's an update
I went ahead and downoaded the HSPL3
I turned on my phone and also pressing the voulme down button which brought to me to a red green and white color. I had my phon conneceted to the computer VIA USB. I first double clicked the T-Mobile rom update thingy and went ahead accpeted the warning signs etc,so the first thing that came up was identifying phone, and after 5 seconds it disappears so nothing came fro that, then later i double clicked the HSPL3 which asked me to either pick the 2.8 or the the 2.8 spl i believe, i had the spl installed so i wen ahead clicked the 2.8. it installed and my phone rbooted and BAM my touch screen worked, and when it asked to boot android i pressed NO. my phone rebooted and iagain the boot loader came up and asked to bott android, so this time i pressed BUt it didnt work because the touch screen stopped working!
So i went ahead to try everything all over but this time i clicked the 2.8 spl and after a minute on my phone it displayed " we hacked it" etc etc etc, i robooted my phone, ad it worked, i turned it on and off twice and it worked i was using my phone after a month So after playing with it alittle bit i decided to put my sim card in it. I turned off the phone and put the Sim card and turned on the phone so i can use it but.....once again the touch screen stopped working... ****!!!!!!
yep, now the touchscreen is once again not working
bump bumpity bump
fusion1204 said:
bump bumpity bump
Click to expand...
Click to collapse
Download a stock WM ROM for your phone, extract and rename your .nbh to leoimg.nbh. Transfer leoimg.nbh. to your SDcard.....enter bootloader mode....there it will flash back to your WM ROM with all HSPL remove. Time to send back to Manufacturer for repair..
Okay hold on. So when you see stock WM ROM coud that be the "T-Mobile_HD2_MR_Software_311...." file? and where can i find my .nbh file?
fusion1204 said:
Okay hold on. So when you see stock WM ROM coud that be the "T-Mobile_HD2_MR_Software_311...." file? and where can i find my .nbh file?
Click to expand...
Click to collapse
extract that from your .exe file.
Stock ROM can be found here
http://forum.xda-developers.com/showthread.php?t=655653
Make sure you use the Stock ROM specific for your phone, else you will brick your phone.
I went ahead and did that, but nothing changed did i do something wrong?
fusion1204 said:
I went ahead and did that, but nothing changed did i do something wrong?
Click to expand...
Click to collapse
Try following this guide....
http://forum.xda-developers.com/showthread.php?t=681317
10507 Thank you for the links but it didn't wok for me.
UGh!
Am i doing something woring? i mean i can get to the screen where it shows the foru colors, i guess that would be flashing and once i get there i can't do anything else the only way for me to do anything while im on that screen is if i have it connected in with my computer, and also start runinng the HSPL program which switches from Hspl to a NON hspl vice versa.
I hope youre not tired of me lol!
please help me out with this stupid situation im in.
Thank you.
Bumpity bump please help me out
I installed maglar 1.12 on my hd2 using the nbh file method... now my hd2 wont turn off it just restarts as soon as you turn it off or put the battery back in.... when in magldr the button lights flash repeditally.... I can still flash roms using maglr usb method but when the roms are booted up the button lights are on constantly even in sleep, it seems to recive random input, and you cant put it in sleep mode and when it goes into sleep mode naturally you cant turn it back on........ My first thought was to try and to go back to stock but because I dont have a windows mobile rom on I cant use the active sync method and for some weird reason it wont go to the bootloader(yes I know how to get to the bootloader I am not and idiot)........ so I am stuck and dont know what to do
nchar123 said:
I installed maglar 1.12 on my hd2 using the nbh file method... now my hd2 wont turn off it just restarts as soon as you turn it off or put the battery back in.... when in magldr the button lights flash repeditally.... I can still flash roms using maglr usb method but when the roms are booted up the button lights are on constantly even in sleep, it seems to recive random input, and you cant put it in sleep mode and when it goes into sleep mode naturally you cant turn it back on........ My first thought was to try and to go back to stock but because I dont have a windows mobile rom on I cant use the active sync method and for some weird reason it wont go to the bootloader(yes I know how to get to the bootloader I am not and idiot)........ so I am stuck and dont know what to do
Click to expand...
Click to collapse
what happens when you try to go to bootloader?
Bro, try flashing any windows mobile 6.5.* rom on your hd2..
To do so, enter hd2 in bootloader mode,
Keep pressing DOWN + POWER when device is switchd off initially
and flash any rom.
This will surely help you
orangekid said:
what happens when you try to go to bootloader?
Click to expand...
Click to collapse
Yes what happens when you try to boo into bootloader?
strange mate!!!
when you ask for help be positive!!!!
use wise words....i stood 5 min to reply u or not!!!
because no one is an idiot on XDA,....
flash radio 2.15 first!!!
if ur phone want work
than
flash from SD card your custom rom 6.5 (search for the steps on xda)
your phone want start for sure!!!!!
but you will get back you bootloader back
1-HSPL
2-T29
3-Mag-loader 1.13
4-flash radio 2.15
5-flash your ROM
nchar123 said:
I installed maglar 1.12 on my hd2 using the nbh file method... now my hd2 wont turn off it just restarts as soon as you turn it off or put the battery back in.... when in magldr the button lights flash repeditally.... I can still flash roms using maglr usb method but when the roms are booted up the button lights are on constantly even in sleep, it seems to recive random input, and you cant put it in sleep mode and when it goes into sleep mode naturally you cant turn it back on........ My first thought was to try and to go back to stock but because I dont have a windows mobile rom on I cant use the active sync method and for some weird reason it wont go to the bootloader(yes I know how to get to the bootloader I am not and idiot)........ so I am stuck and dont know what to do
Click to expand...
Click to collapse
People he can not flash anything having to do with flashing via the SPL bootloader, this is why Orangekid and I both asked what happens when the OP trys to boot into bootloader.
calm down everyone!
lol
sorry, like others have mentioned, what exactly happens from start to finish when you try and get in to the boot loader, yes i know you said you know how to do it
but humour us, start to finish, buttons you push, whats on teh screen, everything.
sounds like something in the SPL has been screwed, been a lot of that recently which is a bit odd.
I can not get to the bootloader
I know that I cant get to the bootloader I tried the way you said above again and it just goes stright to magldr so I can not flash back to stock ........ I took it to a phone repair guy who said he fixed it and it appeared like he did but then two hours later it started again .......
Here is a video of my phone
*htt*p:/*/ww*w.y*ou*tube.c*om/watch?v=U7h3flLrE5g** I put the stars because I can post links right now but this is a video of my phone
nchar123 said:
*htt*p:/*/ww*w.y*ou*tube.c*om/watch?v=U7h3flLrE5g** I put the stars because I can post links right now but this is a video of my phone
Click to expand...
Click to collapse
Ok everyone as you can see he can not get the SPL bootloader to come up.
I will help you out with your Youtube link too.
I am very sorry to tell you but without being able to get to the bootloader you can not flash a official ROM back to the HD2 so you can not send it in for warranty exchange our repair. That is unless there is some miracle program out there that you can run from your computer to force the bootloader to bootup, which i have never heard of one. (Note to Devs that would be a awesome program to create if it is possible )
There is the bootloader.exe but you already have to have a Sync type connection for it to work and i don't know if the connection you get using Zune is enough. I attached the a EnterBootloader.zip file but like I said i don't know if it will help you are not. Try connecting and syncing your HD2 with Zune and then try to run the EnterBootloader.exe from your computer and see what happens.
Thanks for the program but when I try to run it in windows phone 7 it gives me the error that it is not a valid windows phone 7
Is there a way I could update or change magldr without the bootloader? or is there any sort of windows mobile rom I could install through magldr like you would with android or wp7?
I mean sorry it gives the are that it is not a valid win32 aplication not windows phone 7 that was a typo
nchar123 said:
Is there a way I could update or change magldr without the bootloader? or is there any sort of windows mobile rom I could install through magldr like you would with android or wp7?
Click to expand...
Click to collapse
Was shocked to watch your video !!
there is no way to flash windows 6.5 roms directly through MAGLDR..
would suggest you to get HD2 to nearby mobile repair center, hopefully they can help you out
Do you know of one around san diego or a place that could do jtag?
nchar123 said:
Do you know of one around san diego or a place that could do jtag?
Click to expand...
Click to collapse
I know someone in that can JTAG your HD2 buit he lives in Texas, but he is very good and experienced with JTAGing HD2s, PM me if you want more info as it would be against the rules for me to provide any other information in the forums.
Also I do not think you need JTAG but just need your voulume rocker fixed, but he is still the guy to do it.
the volume buttons should be easy to test within windows its self
I doubt its MAGLDR issue, it looks like an SPL issue.
could you tell me how much the jtag would cost and the volume down and up buttons work when the wp7 build is up
Hi
I currently have w7 on my htc hd2 and im trying to revert back to win 6.5.
ive downloaded this stock rom RUU_Leo_TMO_UK_1.43.110.2_Radio_Signed_15.26.50.07U_.
Phone booted into USB Flasher (Hold Power down, Option 5, End call Button.
But it sits at Wait Usb....USB and doesnt move.
What am i doing wrong??
Please help?
Thanks
You need to enter bootloader. Shutdown phone and power on while holding volume down. It will be the tri color screen. Attach USB then run 6.5 rom update
Sent from my HD2 using XDA Windows Phone 7 App
Another option would be to flash the ROM via SD card method.
This way, everything will be set back to factory status.
tictac0566 said:
Another option would be to flash the ROM via SD card method.
This way, everything will be set back to factory status.
Click to expand...
Click to collapse
indeed, you should always use SD method when going back to stock, it will correct most issues and will bring your phone back to how it was when you got it, remember to install HSPL again if you intend to tinker with it some more, SD flash will remove Magldr and HSPL and will also change the radio, spl and ROM
search the forums for how to SD flash, theres plenty of them, infact most of them would have came up in the "suggestions of previously started threads" box when you make this thread!
flashing via bootloader is more reliable, sometimes flashing via sd image is not recognised.
timmymarsh said:
flashing via bootloader is more reliable, sometimes flashing via sd image is not recognised.
Click to expand...
Click to collapse
More reliable but less effective
dazza9075 said:
More reliable but less effective
Click to expand...
Click to collapse
lol, says you
ive had issues previously releasing the keys at a certain time to get the "image" to be recognised, but it does work.
Call me old fashioned, but ive been flashing via bootloarder for many years, sometimes old habits are hard to beat lol
Anyway, both work, take your choice
Hi to all,
I am a noob , i tried to install Android on my HTC HD2 TMO(US) , but after all the Installation i was getting an Error 1E Fatal Error , i am trying to atleast revert back to Windows 6.5, so i downloaded the Official ROM Upgrade from the WebSite the name is T-Mobile_HD2_MR_Software_2.13.531.1.exe and it installed properly without any errors, but all i can see is White Screen Now, does this Installation include OS also or should i install windows 6.5 seperately, please help me
thank you
Hello all, i need some help. I bought used HTC HD2, phone was old for about 2 weeks in perfect condition but he had 2.2 froyo installed on micro sd. Phone is not working fine and i dont like android to much so i want to have wm 6.5 as stock has too. I ha t mobile for operator but im almost positive that phone is bought in EU Pls help me to get off anroid and get the phone back to stock so i can have 6.5 wm os. I tryed everything im just not good enough with terms such as radio,SPL ect. so im noob at this. Pls help me somehow.Sorry for my bad english. Thank you
Hi there, I don't know fully how to do this myself (as I personally love android OS ) but I've found a couple of links that should help you out.
http://androidforums.com/htc-leo-hd...oid-2-2-reinstall-windows-mobile-6-5-3-a.html
http://www.jayceooi.com/2011/08/15/how-to-restore-stock-rom-on-htc-hd2-video/
The ROM is basically the 'operating system' the phone uses, a radio controls how its hardware connects to things and as for SPL I don't know either
If you didn't install android on it yourself you might need to install a couple of things on your PC - the links will tell you what you need. Good luck!
simec2404 said:
Hello all, i need some help. I bought used HTC HD2, phone was old for about 2 weeks in perfect condition but he had 2.2 froyo installed on micro sd. Phone is not working fine and i dont like android to much so i want to have wm 6.5 as stock has too. I ha t mobile for operator but im almost positive that phone is bought in EU Pls help me to get off anroid and get the phone back to stock so i can have 6.5 wm os. I tryed everything im just not good enough with terms such as radio,SPL ect. so im noob at this. Pls help me somehow.Sorry for my bad english. Thank you
Click to expand...
Click to collapse
If he had, as you said, installed Android on the SD card, then just reboot.
Nigeldg said:
If he had, as you said, installed Android on the SD card, then just reboot.
Click to expand...
Click to collapse
how do i just reboot? i tryed that stuff with leoimg ect. but nothings happened, after i shut the pfohe off, i press vol. down and power on button, then that colorful screen appears and says "serial" on the bottom and it doesnt go to the loading screen :/
simec2404 said:
how do i just reboot? i tryed that stuff with leoimg ect. but nothings happened, after i shut the pfohe off, i press vol. down and power on button, then that colorful screen appears and says "serial" on the bottom and it doesnt go to the loading screen :/
Click to expand...
Click to collapse
What kind of SD are U using? Leoimg-thingy is only working on SD's up to 4gb...larger SD's will not be recognized in tricolor loader.
simec2404 said:
how do i just reboot? i tryed that stuff with leoimg ect. but nothings happened, after i shut the pfohe off, i press vol. down and power on button, then that colorful screen appears and says "serial" on the bottom and it doesnt go to the loading screen :/
Click to expand...
Click to collapse
Nah because you said your friend installed Froyo on the SD, I assumed it was a dual boot with WinMo. What's the OS on the NAND? WinMo, WP7 or Android? And as icke pointed out, you'll need a small SD. If you're lucky, your friend may have the original 2GB SD which came with the phone, so you could try again using that one instead.
If the smaller SD doesn't work, are you sure that you're doing everything correctly? You do have leoimg.nbh on the root of your SD card, right?
Nigeldg said:
Nah because you said your friend installed Froyo on the SD, I assumed it was a dual boot with WinMo. What's the OS on the NAND? WinMo, WP7 or Android? And as icke pointed out, you'll need a small SD. If you're lucky, your friend may have the original 2GB SD which came with the phone, so you could try again using that one instead.
If the smaller SD doesn't work, are you sure that you're doing everything correctly? You do have leoimg.nbh on the root of your SD card, right?
Click to expand...
Click to collapse
Android is on the phone and i want WM6.5, i want the original mobile setup.
Now i dont have leoimg.nbh anywhere i think,i did screenshot but i cant post outside links yet cause im fresh member.
I just want to know how can i have back WM6.5 on my htc hd2.
I had problems with downloading my own stock rom via my serial number from htc page so i tryed whit 10 others from other forums but neither one had worked.
Hello!
I am new here as you can see. this is not primary proplem anymore.
I installed XDAndroid GBX0C 2.3.7Build to my HTC balckstone and everything works well, but camera tells me "camera error; Cannot connect to camera."
is there any fix for that?`
and the other thing, when i boot phone it goes to win6.1 and i have to go settings etc. and boot it from haret.exe.
so am i done something wrong or something? Solved
So if somebody can help me i would be very pleased
Ps. And sorry my bad english, i just a finnish.
Edit: I try reinstall, i post is changes comes.
E: No changes, still not working.
EDIT!!!!
SO if someone can help me, place do it
E.
And this just happend, phone just stop working whit black screen.was have to took battery off, and then it took about 10-30min to boot to win again.
THIS IS PRIMARY PROPLEM.
AAAAND now it wont even start. stuck in "smart mobility"...
Please read post's for more information.
now i have tried flashing original rom from CPU and Storege card... both install it correctly and says everyting is ok, but still its stuck at "smart mobility" screen.
it wont even shot in the right corner that red text of versions etc.
so what's the solution to this proplem? i would be very pleased if some one could tell me how to fix my proplem. i know there is someone who know what i should do.
Could I solve this proplem if i unlock and install custom rom? just wondering if that would help?!
Hi,
"Smart Mobility" screen
I had that problem too, and did a hard-reset.
Hold Volume Up + Volume Down buttons (hold hard) and press Power switch until you see the warning sign to confirm a hard reset.
The system will do a re-flash of the original Windows Mobile ROM.
Start Android by running HaRET from Windows Mobile
Yes, you have to run HaRET.
You can make it simpler by making a short-cut in Windows Mobile Start Menu.
Tap and hold on HaRET until you see the Dialog Box to Cut, Copy, etc.
Tap Copy.
Go to Device-Windows-StartMenu, paste as a shortcut
These steps are in the Touch HD Manual. If you do not have one, download it from the HTC website.
chan.sk said:
Hi,
"Smart Mobility" screen
I had that problem too, and did a hard-reset.
Hold Volume Up + Volume Down buttons (hold hard) and press Power switch until you see the warning sign to confirm a hard reset.
The system will do a re-flash of the original Windows Mobile ROM.
Start Android by running HaRET from Windows Mobile
Yes, you have to run HaRET.
You can make it simpler by making a short-cut in Windows Mobile Start Menu.
Tap and hold on HaRET until you see the Dialog Box to Cut, Copy, etc.
Tap Copy.
Go to Device-Windows-StartMenu, paste as a shortcut
These steps are in the Touch HD Manual. If you do not have one, download it from the HTC website.
Click to expand...
Click to collapse
I have tried hard reset, but that didn't work, and tried to put original rom too, and nothing happened. I have 2 original roms
RUU_BlackStone_HTC_FIN_1.14.414.2_Radio_52.49a.25.26_1.09.25.14_Ship
RUU_BlackStone_HTC_FIN_1.56.414.0_Radio_52.62.25.34_1.13.25.24_Ship
but those didint work. i will try today againe. and then if it going to work i will put that haret to start menu.
I'll try that 1.14 first...
flashed that 1.4 rom and waited about an hour and nothing happend... i jsut did hard reset and wait againe if it gonna boot now...
i was thinking that should i put custom rom, coz if something went wrong whit the official?
I mean if there is something wrong in phones hard drive? like something wrong whit registery or something?
something that wont let win start. if there is, how i can fix that?
masentava said:
Hello!
I am new here as you can see. this is not primary proplem anymore.
I installed XDAndroid GBX0C 2.3.7Build to my HTC balckstone and everything works well, but camera tells me "camera error; Cannot connect to camera."
is there any fix for that?`
and the other thing, when i boot phone it goes to win6.1 and i have to go settings etc. and boot it from haret.exe.
so am i done something wrong or something? Solved
Click to expand...
Click to collapse
GBX0C2.3.7 Build is on SD card.
You will need to boot from Windows Mobile first, then run HaRET to reboot to XDAndroid.
If XDAndroid hangs, you need to remove battery, put back battery and power on. Then you see Windows Mobile and do above step again.
Always, from XDAndroid to go back to Windows, you need to Power Off, and then Power On again.
chan.sk said:
GBX0C2.3.7 Build is on SD card.
You will need to boot from Windows Mobile first, then run HaRET to reboot to XDAndroid.
If XDAndroid hangs, you need to remove battery, put back battery and power on. Then you see Windows Mobile and do above step again.
Always, from XDAndroid to go back to Windows, you need to Power Off, and then Power On again.
Click to expand...
Click to collapse
I undestood that... but thats not the proplem anymore coz windows wont start, its stuck in "smart mobility"
i tryed to flash original rom's bot that didint work....
so prolem is how do i get windows back to work?
now i have tried flashing original rom from CPU and Storege card... both install it correctly and says everyting is ok, but still its stuck at "smart mobility" screen.
it wont even shot in the right corner that red text of versions etc.
so what's the solution to this proplem? i would be very pleased if some one could tell me how to fix my proplem. i know there is someone who know what i should do.
masentava said:
I undestood that... but thats not the proplem anymore coz windows wont start, its stuck in "smart mobility"
i tryed to flash original rom's bot that didint work....
so prolem is how do i get windows back to work?
now i have tried flashing original rom from CPU and Storege card... both install it correctly and says everyting is ok, but still its stuck at "smart mobility" screen.
it wont even shot in the right corner that red text of versions etc.
so what's the solution to this proplem? i would be very pleased if some one could tell me how to fix my proplem. i know there is someone who know what i should do.
Click to expand...
Click to collapse
You say you are flashing the original ROM. You mean the original HTC Windows Mobile 6.1 ROM? I understand you can only get this done only from HTC authorized centers.
(800) stedntf
chan.sk said:
You say you are flashing the original ROM. You mean the original HTC Windows Mobile 6.1 ROM? I understand you can only get this done only from HTC authorized centers.
Click to expand...
Click to collapse
I have
This
RUU_BlackStone_HTC_FIN_1.14.414.2_Radio_52.49a.25.26_1.09.25.14_Ship
And this.
RUU_BlackStone_HTC_FIN_1.56.414.0_Radio_52.62.25.34_1.13.25.24_Ship
Blackstone/HD Links | Guides | Stickies | Roms | Read before posting
http://forum.xda-developers.com/showthread.php?t=999925
U have to install HTC USB Sync Drivers drivers
Put the phone into bootloader by pressing volume down + power button
plug the usb cable to the computer/laptop
and then run the shipped rom executable file... when the tricolor screen displays USB at the bottom.
else extract the RUU_signed.nbh or any file with .nbh extension from the shipped file with zip viewers like 7-zip
rename the file to BLACIMG.nbh
Put into the root of memory card
put the phone into bootloader and follow the screen instructions..
And the most important thing... search the forum.. before posting..
Hope this works for you
Hi there! I think that you can't reflash even a Original ROM without unlock the phone with new Hard-SPL from Olinex ,considering that you have tried a Hard Reset and nothing happened ,your last option is to unlock the phone and reflash the ship ROM ,or to flash a custom ROM ( is not a good solution if you still have warranty,but still you cand revert your stock SPL:good so ,you have nothing else to lose , all is left for you is to try what i said before . If you don't know how to do it,let me know and i will post the exact links to instructions.
Hi all,
You can try a NAND ROM like the new release of Fagyi. There is an easy step by step manual to installation. You will lose winmo, but you will have a real android.
It looks pretty and he has solved many of the issues of previous versions.
Regards
CristianCRS said:
Hi there! I think that you can't reflash even a Original ROM without unlock the phone with new Hard-SPL from Olinex ,considering that you have tried a Hard Reset and nothing happened ,your last option is to unlock the phone and reflash the ship ROM ,or to flash a custom ROM ( is not a good solution if you still have warranty,but still you cand revert your stock SPL:good so ,you have nothing else to lose , all is left for you is to try what i said before . If you don't know how to do it,let me know and i will post the exact links to instructions.
Click to expand...
Click to collapse
well, maybe i will try to unlock, i looked some instruction, aaand didint understood
So if there is quide to dummiest dummies, so i think that would help me!
But thx to all answers!
Do a Search and read the posts
masentava said:
well, maybe i will try to unlock, i looked some instruction, aaand didint understood
So if there is quide to dummiest dummies, so i think that would help me!
But thx to all answers!
Click to expand...
Click to collapse
You need to understand what you are going to do or you may end up with a phone that does not work anymore.
Do a search of the forum and read the posts. There are so many.
http://forum.xda-developers.com/sitesearch.php?q=unlock blackstone