Hi guys!
I'm from Germany so I'm not even sure if the expressions I use are right, but I think you'll get my point.
I'm looking for the screws of the SGS directly under the battery cover. I think those type of screws ist named "torx" but I need a size as well, right? Does anybody know, where to get some of them?
Thanks for any help!
Anyone?
I think they are called T6, but still not sure... =/
-Juff- said:
Hi guys!
I'm from Germany so I'm not even sure if the expressions I use are right, but I think you'll get my point.
I'm looking for the screws of the SGS directly under the battery cover. I think those type of screws ist named "torx" but I need a size as well, right? Does anybody know, where to get some of them?
Thanks for any help!
Click to expand...
Click to collapse
Don't know about your phone, but under my cover are simple phillips head screws (Kreuzschrauben) ... Even if they are torx you can get them at any hardware store (Obi, Praktiker etc) I am pretty sure the folks there can help you (or try it at a Conrad...)!
Thanks for the info guys, i lost my screws when I took them all out to inspect some potential water damage. Going to have a hunt for them this weekend.
However I'm not sure how deep / long they are, anyone got an idea?
Related
can any1 help me out here i just bought an 8525 for 80 off a co-worker he didnt want it because it keeps turning off on him i think its a few loose connections...theres a bit of play in with the battery but anyhow changed batteries same thing so any one know what part i should be replacing and also where i can get parts for this phone. i have tried looking on the site that i use for my other phones but all i find are screens and black housings so if you guys can help me out i'd love it
anyone im looking at it right now and all seems well and i tested the battery on a different fone and everything is green just cant figure it out. also just found out that my jogwheel is broken
That could explain why the co-worker sold it to you for 80 bucks.. .. you might be able to find parts on Ebay .. see if anyone is selling one with a busted screen or something..
thats exactly ehy i got for 80 i knew what it was just hoping for an easy fix i do repairs tho so no biggie just gotta find the parts thanks ill start looking once my ass friend gets off myspace!!!
It can't be a "loose connection" unless the solder from the battery connectors came loose because he battery connectors are connected right to the board.
thats one thing i noticed also the prong look like they have been squished down almost flat instaed of < they are more - but not that bad and there is quite a bit of playu from the battery compared to my good 8525 oh well maybe i can come up on a third and swap out parts. thanks for the help guys any other suggestion i have already kinda fixed the prongs. and now the phone wont even turn on this suck but i know this can be fixed
hey does any1 have a broken hermes they wouldent mind getting rid of i need parts or if ppl wanna be nice to me and my thin wallet and donate their old broken hermes to me i would really appreciate it
Gyngabread Man said:
hey does any1 have a broken hermes they wouldent mind getting rid of i need parts or if ppl wanna be nice to me and my thin wallet and donate their old broken hermes to me i would really appreciate it
Click to expand...
Click to collapse
I dealt with a similar case a while back. Going off randomly. In his case it turned out it was the battery connections. They had lost some of their spring tension and he was unwilling to try bending them out a little for fear of causing more damage. In the end we decided that he would try placing a strip of card between the battery and the casing on the side opposite to the battery connections. ie. to press the battery more firmly against the connectors. How thick it would need to be would depend on how squashed the connectors are.
It worked for him and he decided just to leave it in place.
Mike
@Gyngabread Man
If you cant fix it let me know. I need the vibrate motor. And no im not kidding
hi guys I know there was a trick with aluminium foile to get a better reception does anyone remember it, tks in advance greets
erraticfun said:
hi guys I know there was a trick with aluminium foile to get a better reception does anyone remember it, tks in advance greets
Click to expand...
Click to collapse
it actualy sucks. Gold leaf works better, but is much more difficult. You have to create something like a maze on a piece of clear tape and leave the part that the two antenas press up against.
That part is behind the camera cover on your wizard. use the wizard manual to take the phone appart.
Hi,
I'm new to this forum so i'd like to say hello to everybody first
I have a g1 with the screen cracked. When I say the screen is cracked I mean that upper glass area; The lcd does not seem to be cracked in any way so there is no bleeding at all. Touch still works very well even in the cracked area.
I seem to have come across only 1 ebay auction that was selling a digitizer and everywere is absurdly expensive to buy. Any ideas where i can find one ? At 189$ i'm half way to buying a new phone tbh.
Also I saw in this forum that some people had the same problem and people told them that they would need to replace both lcd AND digitizer, however i clearly saw in the htc dream service manual that they are two separate parts with separate part numbers. Is there some particular reason for this ?
Just to clarify, can any tell me the order in which components are placed in the htc g1 ? Im assuming they are as follows:
Touch Screen Digitizer
LCD Screen
cover and hinge
in that order..Am I right in my assumption ?
Thanks,
Mewt
Bump. I would like to know as well.
Check it out:
This listing just got put up on eBay today. This guy has 50 digitizers for sale:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=230336383436
If you are sure the LCD is intact, you should just buy the Digitizer. The LCD can easily be seen by opening up the phone.
http://cgi.ebay.com/HTC-T-MOBILE-GO...5|66:2|65:12|39:1|240:1318|301:1|293:1|294:50
I can confirm you can replace the digitizer WITHOUT replacing the lcd.
I just did it. A car ran over my G1 a while ago and I've been lurking on ebay ever since waiting for digitizers to be listed. With a new digitizer, a Torx screwdriver and about an hour I have just replaced the broken one and the new one works perfectly.
Of course that also means I now have a spare G1 since I bought another one in case I couldn't get a replacement.
I will be doing the same shortly.
Actually this is the best price I have found on a digitizer
http://www.perfectesell.com/gog1glscdico.html
Any tips on replacing the part? Does the phone have to come completely apart?
I can't buy from that buyer as he doesn't ship to Malta but thanks, now I know what I need to look for and will be doing so. Hope I can get my g1 working well again...I just hate trying to read messages with cracks in them
Thanks all for your replies
Its quite fiddly but as long as you have the manual you should be okay.
There's a few things tho. Page 23 doesn't really show you how to disconnect the camera very well. On the underside of the main board there is a connector like the one for the screen. It is released by flipping the paddle lever think 90 degrees down. Otherwise the camera connector gets pulled out when you remove the mainboard.
It should go without saying you don't need to disassemble the bottom "chin" part when you remove it. Oh and page 24 has an error, those aren't the 2 screws you need to remove, its 2 long ones, one is in the top right of that picture on page 24 the other is to the right of the one circled.
Mr_dev said:
Its quite fiddly but as long as you have the manual you should be okay.
There's a few things tho. Page 23 doesn't really show you how to disconnect the camera very well. On the underside of the main board there is a connector like the one for the screen. It is released by flipping the paddle lever think 90 degrees down. Otherwise the camera connector gets pulled out when you remove the mainboard.
It should go without saying you don't need to disassemble the bottom "chin" part when you remove it. Oh and page 24 has an error, those aren't the 2 screws you need to remove, its 2 long ones, one is in the top right of that picture on page 24 the other is to the right of the one circled.
Click to expand...
Click to collapse
hey would you say the average person would be able to change the digitizer or do you have to be a handy man.. taking anybodys replys ONLY if you''ve done it
Well I guess I am the average person but then I've taken many a pc and laptop apart and put it back together again so maybe not...
There's nothing that requires great skill in it. As long as you're gentle, patient and careful (taking apart a G1 is like making love to a beautiful woman...). Keep track of what screws came from where and don't try and force anything.
Remember you need some torx head screwdrivers. but you can get these on ebay for very little.
I have to admit I feel a bit smug when I see forum posts from people who advise you sent it back to T-Mo and pay a $100+ excess for them to do it. As if!
Ah, my screen is just gently scratched, but it's annoying sometimes. I might look at into this if it gets any worse.
Just looking at the back of the screen when the G1 is open, it looks like I'd have to take the whole phone apart...are there guides I can look at?
Here is some sites that helped me out.
This is an easy to ready explanation to what you are looking at.
http://www.phonewreck.com/wiki/index.php?title=T-Mobile_G1
This is where I found the service manual a while back
http://www.intomobile.com/2008/12/18/dissect-your-t-mobile-g1-with-the-htc-dream-service-manual.html
This was where you can find the digitizer. (I dunno which one it is... but I think its the clearpad) only thing I could not find a match on part numbers anywhere
http://www.synaptics.com/solutions/products
And this is the address and Houston local number for HTC America. (i didnt check the number so i'm 72.34763% sure its right(just do a little social engineering to get to where you need to be.) )
http://maps.google.com/maps?hl=en&i...-95.551229&spn=0.009187,0.015986&z=16&iwloc=A
same boat here. cracked digitizer. seems like the g1 is the only phone, for which you can't buy one.
Mr_dev said:
Well I guess I am the average person but then I've taken many a pc and laptop apart and put it back together again so maybe not...
There's nothing that requires great skill in it. As long as you're gentle, patient and careful (taking apart a G1 is like making love to a beautiful woman...). Keep track of what screws came from where and don't try and force anything.
Remember you need some torx head screwdrivers. but you can get these on ebay for very little.
I have to admit I feel a bit smug when I see forum posts from people who advise you sent it back to T-Mo and pay a $100+ excess for them to do it. As if!
Click to expand...
Click to collapse
hey i have a question i replace my digitizer but now the bottom part of the touch screen... closest to the menu button doesnt work. what do you think can be wrong
Pull it apart again using the service guide section 2.2.3 and make sure all connections have complete contact. If something is not sitting right the circuit may not be ringing out correctly. Once you have gone through all the steps 2.3.2(lcm assembly) and everything looks connected properly, assemble, reboot and test. If it is not fixed you may have a bad digitizer I'm hoping for the fact that most of your screen is working its just a connection problem.
Mr_dev said:
Its quite fiddly but as long as you have the manual you should be okay.
There's a few things tho. Page 23 doesn't really show you how to disconnect the camera very well. On the underside of the main board there is a connector like the one for the screen. It is released by flipping the paddle lever think 90 degrees down. Otherwise the camera connector gets pulled out when you remove the mainboard.
It should go without saying you don't need to disassemble the bottom "chin" part when you remove it. Oh and page 24 has an error, those aren't the 2 screws you need to remove, its 2 long ones, one is in the top right of that picture on page 24 the other is to the right of the one circled.
Click to expand...
Click to collapse
When you reassembled what did you do about the tape and gaskets? Were you able to buy new or did you use something else? Thanks!
Matt
s02mike said:
Here is some sites that helped me out.
This is an easy to ready explanation to what you are looking at.
http://www.phonewreck.com/wiki/index.php?title=T-Mobile_G1
This is where I found the service manual a while back
http://www.intomobile.com/2008/12/18/dissect-your-t-mobile-g1-with-the-htc-dream-service-manual.html
This was where you can find the digitizer. (I dunno which one it is... but I think its the clearpad) only thing I could not find a match on part numbers anywhere
http://www.synaptics.com/solutions/products
And this is the address and Houston local number for HTC America. (i didnt check the number so i'm 72.34763% sure its right(just do a little social engineering to get to where you need to be.) )
http://maps.google.com/maps?hl=en&i...-95.551229&spn=0.009187,0.015986&z=16&iwloc=A
Click to expand...
Click to collapse
i'm willing to try replacing it myself as well and i was wondering how much your purchased your new digitizer for. would the one suggested earlier at this link: http://www.perfectesell.com/gog1glscdico.html be good? it seems a lot cheaper than other ones and i dont want to buy a faulty and cheap one that may not work as well or break. any other tips would be GREATLY appreciated. TIA!
Here's the correct page on the Perfectesell site:
http://www.perfectesell.com/htcgog1glscd.html
Same price ($65) as the ebay auction that ended.
I dunno what that $12.95 thing was... price doesn't seem right for glass, touch sensing wizardry
mattcairns said:
When you reassembled what did you do about the tape and gaskets? Were you able to buy new or did you use something else? Thanks!
Matt
Click to expand...
Click to collapse
Some of the gaskets i didnt fully remove so i just place em down... and some of the tape i didnt reuse.
bloob9 said:
i'm willing to try replacing it myself as well and i was wondering how much your purchased your new digitizer for. would the one suggested earlier at this link: http://www.perfectesell.com/gog1glscdico.html be good? it seems a lot cheaper than other ones and i dont want to buy a faulty and cheap one that may not work as well or break. any other tips would be GREATLY appreciated. TIA!
Click to expand...
Click to collapse
I bought my digitizer on ebay for about 25 dollars i think. then i bought the screwdrive kit for 7 dollars also
s02mike said:
Pull it apart again using the service guide section 2.2.3 and make sure all connections have complete contact. If something is not sitting right the circuit may not be ringing out correctly. Once you have gone through all the steps 2.3.2(lcm assembly) and everything looks connected properly, assemble, reboot and test. If it is not fixed you may have a bad digitizer I'm hoping for the fact that most of your screen is working its just a connection problem.
Click to expand...
Click to collapse
thanx i took it apart again and that fixed it... i have 2 more problems 1 major 1 not. i dont know but i normally got 3g service in my house and now i dont what could b the problem.
second is that the screen doesnt swivel smoothy as before
Hey guys!
Today i got my hands on curious thing. My friend was drunk "as he stated" and somehow he was able to tore off USB port from his beloved HD2. Crazy right, I didnt even believe it was possible as I am an owner of HD2 myself. So Im thinking about maybe try to solder it back together (if possible).
There are some pictures as attachements so you can take a look. The casing isnt damaged at all, its like that USB just fell of.
QQboss said:
Hey guys!
Today i got my hands on curious thing. My friend was drunk "as he stated" and somehow he was able to tore off USB port from his beloved HD2. Crazy right, I didnt even believe it was possible as I am an owner of HD2 myself. So Im thinking about maybe try to solder it back together (if possible).
There are some pictures as attachements so you can take a look. The casing isnt damaged at all, its like that USB just fell of.
Click to expand...
Click to collapse
Connector seems burnt, just curious what you'll find inside... If the mainboard look like this that's bad news.
A new connector is cheap but there are different shapes of the inner part so it is possible that it won't fit, check before you begin to solder.
Looks badly burnt to me.
I suspect mainboard no good for repair but worth checking first.
Quite easy to pick up an EU version HD2 for around 40USD (faulty handset) on eBay if can spend a bit of time looking/bidding and in good shape except digitizer, then simply donor best parts to complete one working rebuild.
Hey thanks for replyin! Well I opened it up and it seems motherboard isnt damaged. Well, as far as I can tell . Phone is working with charged battery without problems, so I think its worth a shot. Take a look and tell me what do you think
QQboss said:
Hey thanks for replyin! Well I opened it up and it seems motherboard isnt damaged. Well, as far as I can tell . Phone is working with charged battery without problems, so I think its worth a shot. Take a look and tell me what do you think
Click to expand...
Click to collapse
I had a hd2 in a similar condition and attempted this. I failed and it killed the mboard straight away i would only attempt if you really really need too ;/
Sent from my Nexus 7 using Tapatalk HD
hey buddy, thanks I will be really carefull. I cant really tell you what good is a phone like this without USB connection (and dont forget charging), so this is "operation: must do". Sorry for your HD2 though.
You can pick up a new usb socket from eBay/amazon etc.
It is quite a tricky bit of small soldering & can be very hard if contact points on board are broken below board.
Worth a try but not easy ... If you do succeed, once tested working ok use PU40 adhesive sealant to pack around sides & back of socket as will insulate & help secure socket hopefully helping reduce chance of fracturing joins or dislocating completely again.
Yup! USB is already on the way. Thanks for tips buddy, I will check back here when its done , it should take few days untill new USB is here.
QQboss said:
Yup! USB is already on the way. Thanks for tips buddy, I will check back here when its done , it should take few days untill new USB is here.
Click to expand...
Click to collapse
Any news? Did you succeed with the soldering?
straylight975 said:
Any news? Did you succeed with the soldering?
Click to expand...
Click to collapse
I'm also interested Any news?
Sent from my Nexus 4 using Tapatalk 4 Beta
I wish you all the luck, 'cause you gonna need it! (but maybe you're a soldering master and you know what you're doing...)
Hi everyone. Today, I noticed that something is covering my front camera lens.
Do you know what is that piece covering the camera? Anyone encounter this situation?
I didn't drop my phone not even once and I tried to smack the top of the phone to see if it moves, but no luck.
P.S. The camera is able to take pictures normally.
I have a SM-N9005.
Thanks
Go exchange it... Looks like a faulty device. It could be a piece of electrical tape in the wrong position.
Sent from my SM-N900W8 using Tapatalk
bogdan2603 said:
Hi everyone. Today, I noticed that something is covering my front camera lens.
Do you know what is that piece covering the camera? Anyone encounter this situation?
I didn't drop my phone not even once and I tried to smack the top of the phone to see if it moves, but no luck.
P.S. The camera is able to take pictures normally.
I have a SM-N9005.
Thanks
Click to expand...
Click to collapse
I have the exact same problem. Although mine is worse and i cant take pictures normally. Did you managed to solve this
bogdan2603 said:
Hi everyone. Today, I noticed that something is covering my front camera lens.
Do you know what is that piece covering the camera? Anyone encounter this situation?
I didn't drop my phone not even once and I tried to smack the top of the phone to see if it moves, but no luck.
P.S. The camera is able to take pictures normally.
I have a SM-N9005.
Thanks
Click to expand...
Click to collapse
*boy*racer* said:
I have the exact same problem. Although mine is worse and i cant take pictures normally. Did you managed to solve this
Click to expand...
Click to collapse
Looks like some sort of cover for the camera.
Maybe this site can help understand: http://www.ifixit.com/Teardown/Samsung+Galaxy+Note+3+Teardown/19209
But i think @nicholaschum 's solution will work best.
HanZie82 said:
Looks like some sort of cover for the camera.
Maybe this site can help understand: http://www.ifixit.com/Teardown/Samsung+Galaxy+Note+3+Teardown/19209
But i think @nicholaschum 's solution will work best.
Click to expand...
Click to collapse
Hey you were right. Soon as i posted my issue, i thought i would watch a dismantle video and presto! It was a round rubber like washer that has slipped from around the camera.
All sorted now
Hi....Can you let me know how did you get this fixed as I am also having the same issue....
nelven said:
Hi....Can you let me know how did you get this fixed as I am also having the same issue....
Click to expand...
Click to collapse
Hi,
I didn't
Now, that rubber is covering a lot more and I'm unable to take pictures.
nicholaschum said:
Go exchange it... Looks like a faulty device. It could be a piece of electrical tape in the wrong position.
Sent from my SM-N900W8 using Tapatalk
Click to expand...
Click to collapse
i think its a faulty device or a piece of electrical tape too
3azmeo said:
i think its a faulty device or a piece of electrical tape too
Click to expand...
Click to collapse
I don't think they will consider to be a faulty device and change it, although I would like a new Note 3 :fingers-crossed::fingers-crossed::fingers-crossed:
To me, it seems to be a soft plastic that keeps the front-camera in position and not to touch directly the front-panel (display assembly).
So, probably they will change/remove the soft plastic
GO to your provider an request a NEW device
Do this : Contact 1st Samsung Service in your country and tell to them the problem becouse this a factory fault phone .
After you make some papers and a proove that you contacted already the samsung Service from your country , contact your seller and show him the problem
YOU MUST proove that : you did NOT DROPED your PHONE , DID NOT SHOCKED YOUR PHONE with some other things , like drop with speed in bed trow in the pillow etc etc , proove that you did not used any screwdriver , to have ORANGE WATER SENSOR in the back under the battery STILL ORANGE and NO ROOTED PHONE .
THEY WILL CHANGE YOUR DEVICE , BECOUSE IS IMPOSSIBLE TO FIX THAT IS A PART OF A PLASTIC THAT WAS SLIPPERED FROM HIS PLACE .