Related
Both mine and the wife's Exec's now have loose styluses, is there any way to fix this?
Sellotape
Deaks100 said:
Both mine and the wife's Exec's now have loose styluses, is there any way to fix this?
Click to expand...
Click to collapse
My Wizard's always done this. I've had it apart and couldn't fix it, so have settled for using a couple of turns of sellotape around the tip end of the stylus. Do it neatly and you can't see it, and it works nicely.
Ric
i put two small pieces of insulating tape in the hole where the stylus goes... it seems to hold well. i have attached a image. good luck
Deaks100 said:
Both mine and the wife's Exec's now have loose styluses, is there any way to fix this?
Click to expand...
Click to collapse
Hi, you can try one of these. Bee usiing mine for ages now and it's great. http://www.boxwave.com/products/styraballpointpen/styra-ballpoint-pen-stylus-i-mate-jasjar_723.htm
These are available from UK (mobilefun I think)
Regards
Mav
mavrik64 said:
Hi, you can try one of these. Bee usiing mine for ages now and it's great. http://www.boxwave.com/products/styraballpointpen/styra-ballpoint-pen-stylus-i-mate-jasjar_723.htm
These are available from UK (mobilefun I think)
Regards
Mav
Click to expand...
Click to collapse
Hi,
It looks the same size - does it really stay in place more than the original, if so I'll get one!!
Thanks Matt
Tape: £1.39
Time out from work to craft the end of the tape to suit the exec: £4.50
The look on my other half's face when I prove the stylus will stay put: Priceless.
For most things you can use your Mastercard, for everything else, there's insulating tape.
P.S. I used black so it doesn't look so conspicious... is it vain or just the geek in me?
Best wishes,
i just wrapped a little tape around the stylus, just where the plastic meets the metal, works great, had it in situ around 4/5 months now
matt1971 said:
Hi,
It looks the same size - does it really stay in place more than the original, if so I'll get one!!
Thanks Matt
Click to expand...
Click to collapse
Not dropped out of my Exec yet. Funny thing is, I didn't think it would last long so I also bought a pack of 3 stock Stylus. Never used them. Hope I never will.
The new one has been in since Dec 06, used daily, and still going strong.
Regards
Mav
my stylus wud come out as if cheese but then i lifted the black part little up and now it stays in it place
Best thing is to actually get one of those 3-in one styli. They are actually a little thicker, which means they stay in a lot better. Mobile Fun sell them. Just google them and fine oneone.
Hi guys!
I'm from Germany so I'm not even sure if the expressions I use are right, but I think you'll get my point.
I'm looking for the screws of the SGS directly under the battery cover. I think those type of screws ist named "torx" but I need a size as well, right? Does anybody know, where to get some of them?
Thanks for any help!
Anyone?
I think they are called T6, but still not sure... =/
-Juff- said:
Hi guys!
I'm from Germany so I'm not even sure if the expressions I use are right, but I think you'll get my point.
I'm looking for the screws of the SGS directly under the battery cover. I think those type of screws ist named "torx" but I need a size as well, right? Does anybody know, where to get some of them?
Thanks for any help!
Click to expand...
Click to collapse
Don't know about your phone, but under my cover are simple phillips head screws (Kreuzschrauben) ... Even if they are torx you can get them at any hardware store (Obi, Praktiker etc) I am pretty sure the folks there can help you (or try it at a Conrad...)!
Thanks for the info guys, i lost my screws when I took them all out to inspect some potential water damage. Going to have a hunt for them this weekend.
However I'm not sure how deep / long they are, anyone got an idea?
Sorry, I've been saying I would post this for a while now.
It's not as thorough as it could be but it's a start.
Ask questions and contribute to it (pictures most welcome) to improve on it.
Also this doesn't go through the full process of replacing the digitizer, but hopefully you can work it out. Again, if anyone wants to contribute a more thorough guide on doing this they are most welcome to.
Cheers man
Awesome stockwell. Much appreciated. Looks easy enough. Now i can replace my cracked screen.
Now to find someone on ebay to buy it off.
Thanks stockwell. I was looking forward to seeing it I will try to open my broken u8800 tomorrow.
nice post stockwell.
If I had this tutorial in the beginning of September it would have saved me €60 from official repair.
I could do the repair easily myself, but I didn't know how to remove the upper part of the housing, near the camera and I was afraid of damaging even more. And looks so easy
Thanks Stockwell !
Thanks .. I have passed it my self last friday.. have you noticed the small plastic between the sim and sd card.. it holds the rj connection.
Just reminder, after battery cover and battery you should remove camera cover as it hold two from six screws.. always take care..
Finally, my device is u8800h
Sent from my IDEOS X5 using xda premium
I like the sushi mat backdrop!
There isn't anywhere in there that could be an HDMI connection is here, what's behind the cover beside the volume switch? How about JTAG?
Thanks stockwell.
I've been wondering about this for some time now because I got some dust on the inside screen and I wanted to clean it up. I know that I might lose the warranty but it's all good. The phone it's cheap anyways.
Jtag, yeah! Can we see what happens with fm radio? Any trace to indicate is connected?
dzo said:
I like the sushi mat backdrop!
There isn't anywhere in there that could be an HDMI connection is here, what's behind the cover beside the volume switch? How about JTAG?
Click to expand...
Click to collapse
u8800,cm7,[email protected]
dzo said:
I like the sushi mat backdrop!
There isn't anywhere in there that could be an HDMI connection is here, what's behind the cover beside the volume switch? How about JTAG?
Click to expand...
Click to collapse
Lol it was either the sushi mat or my VB bar mat.
There are a group of test points which you can actually get to by pulling out the little rubber stopper near the sim card tray, which to me screamed JTAG when I saw them. There's a little moisture activated warranty sticker covering them as well.
I can't really see a place for a HDMI connector, certainly not near the volume rocker.
HDMI is too far fetched.thx for the guide mate.
u8800,cm7,[email protected]
Bluetooth antenna
Is the Bluetooth antenna visible and does it look as if there any hope of improving the signal strength by either removing metallic bits nearby or something. I am seriously unimpressed by the signal strength - compared to my Nokia N95 for example.
I cannot use my BT headset if the device is in my trouser pocket, and even if I put the phone in a shirt pocket the signal drops out if I turn my head to one side.
With the Nokia, it is rock solid.
Thanks for that. I'm planning to open my U8800 tonight.
It went into the water and now half of the touchscreen is not working anymore
bukington said:
Thanks for that. I'm planning to open my U8800 tonight.
It went into the water and now half of the touchscreen is not working anymore
Click to expand...
Click to collapse
Can you make some closeup photos?
Sent from my IDEOS X5
bukington said:
Thanks for that. I'm planning to open my U8800 tonight.
It went into the water and now half of the touchscreen is not working anymore
Click to expand...
Click to collapse
Please, upload high quality photos for us that when open your phone.
I wonder position of the primary microphone in u8800.
Thanks.
bukington said:
Thanks for that. I'm planning to open my U8800 tonight.
It went into the water and now half of the touchscreen is not working anymore
Click to expand...
Click to collapse
how did you get on. Was it easy enough todo?
ufukyayla said:
Please, upload high quality photos for we that when open your phone.
I wonder position of the primary microphone in u8800.
Thanks.
Click to expand...
Click to collapse
Sure, I'll take some pictures, my phone is wide open.
---------- Post added at 08:00 AM ---------- Previous post was at 07:52 AM ----------
smiley_nz said:
how did you get on. Was it easy enough todo?
Click to expand...
Click to collapse
It was a bit long because I was extremely careful when detaching the back cover. I use something like a credit card to unlock it.
It seems a condensator has fried near the touchscreen controller. I'll buy a new one.
Tnx
Sent from my u8800
Here's the pictures: OOps I'm not allowed to post links....
Just google 'bukington picasa', you should find it....
Sorry for the crappy quality but I only had an iPhone to take pictures, my DSLR being broken atm...
bukington said:
Here's the pictures: OOps I'm not allowed to post links....
Just google 'bukington picasa', you should find it....
Sorry for the crappy quality but I only had an iPhone to take pictures, my DSLR being broken atm...
Click to expand...
Click to collapse
Thanks!
Here the link https://picasaweb.google.com/113356528354519301569/HuaweiU8800
Hi everyone. Today, I noticed that something is covering my front camera lens.
Do you know what is that piece covering the camera? Anyone encounter this situation?
I didn't drop my phone not even once and I tried to smack the top of the phone to see if it moves, but no luck.
P.S. The camera is able to take pictures normally.
I have a SM-N9005.
Thanks
Go exchange it... Looks like a faulty device. It could be a piece of electrical tape in the wrong position.
Sent from my SM-N900W8 using Tapatalk
bogdan2603 said:
Hi everyone. Today, I noticed that something is covering my front camera lens.
Do you know what is that piece covering the camera? Anyone encounter this situation?
I didn't drop my phone not even once and I tried to smack the top of the phone to see if it moves, but no luck.
P.S. The camera is able to take pictures normally.
I have a SM-N9005.
Thanks
Click to expand...
Click to collapse
I have the exact same problem. Although mine is worse and i cant take pictures normally. Did you managed to solve this
bogdan2603 said:
Hi everyone. Today, I noticed that something is covering my front camera lens.
Do you know what is that piece covering the camera? Anyone encounter this situation?
I didn't drop my phone not even once and I tried to smack the top of the phone to see if it moves, but no luck.
P.S. The camera is able to take pictures normally.
I have a SM-N9005.
Thanks
Click to expand...
Click to collapse
*boy*racer* said:
I have the exact same problem. Although mine is worse and i cant take pictures normally. Did you managed to solve this
Click to expand...
Click to collapse
Looks like some sort of cover for the camera.
Maybe this site can help understand: http://www.ifixit.com/Teardown/Samsung+Galaxy+Note+3+Teardown/19209
But i think @nicholaschum 's solution will work best.
HanZie82 said:
Looks like some sort of cover for the camera.
Maybe this site can help understand: http://www.ifixit.com/Teardown/Samsung+Galaxy+Note+3+Teardown/19209
But i think @nicholaschum 's solution will work best.
Click to expand...
Click to collapse
Hey you were right. Soon as i posted my issue, i thought i would watch a dismantle video and presto! It was a round rubber like washer that has slipped from around the camera.
All sorted now
Hi....Can you let me know how did you get this fixed as I am also having the same issue....
nelven said:
Hi....Can you let me know how did you get this fixed as I am also having the same issue....
Click to expand...
Click to collapse
Hi,
I didn't
Now, that rubber is covering a lot more and I'm unable to take pictures.
nicholaschum said:
Go exchange it... Looks like a faulty device. It could be a piece of electrical tape in the wrong position.
Sent from my SM-N900W8 using Tapatalk
Click to expand...
Click to collapse
i think its a faulty device or a piece of electrical tape too
3azmeo said:
i think its a faulty device or a piece of electrical tape too
Click to expand...
Click to collapse
I don't think they will consider to be a faulty device and change it, although I would like a new Note 3 :fingers-crossed::fingers-crossed::fingers-crossed:
To me, it seems to be a soft plastic that keeps the front-camera in position and not to touch directly the front-panel (display assembly).
So, probably they will change/remove the soft plastic
GO to your provider an request a NEW device
Do this : Contact 1st Samsung Service in your country and tell to them the problem becouse this a factory fault phone .
After you make some papers and a proove that you contacted already the samsung Service from your country , contact your seller and show him the problem
YOU MUST proove that : you did NOT DROPED your PHONE , DID NOT SHOCKED YOUR PHONE with some other things , like drop with speed in bed trow in the pillow etc etc , proove that you did not used any screwdriver , to have ORANGE WATER SENSOR in the back under the battery STILL ORANGE and NO ROOTED PHONE .
THEY WILL CHANGE YOUR DEVICE , BECOUSE IS IMPOSSIBLE TO FIX THAT IS A PART OF A PLASTIC THAT WAS SLIPPERED FROM HIS PLACE .
I'm posting this as a guide to repairing your GPS at the hardware level after a teardown. So you decided to replace your broken screen, or put on some fancy back cover on your M8. Or even sent in your phone for repair just get it back with no GPS lock. You notice your phone sees satellites but can't get a fix/lock because the signal is to low. Simple fix. I've attached some images to help explain the process.
First you need to remove the back cover. Just the back cover. (This is a nice tutorial https://www.youtube.com/watch?v=kDsZLl_JzwA )
Second. Locate ITEM #1 at the top of the phone shown in the attached pictures. This is a copper metal tab that bends easily. My guess, this get bent during teardown.
Third. Locate ITEM #2 on the back cover shown in the attached pictures. This is a contact point for ITEM #1.
Fourth. Bend ITEM #1 so it contacts ITEM #2 when you reassemble the back cover. That's it.
Fifth. Download GPS Statues from the market and test your GPS.
Sixth. Hit the thanks button and enjoy a beer.
thank you
very nice idea and saved my day/week/month.... i tried everything regarding software, firmware and rom but nothing would help.
at the same time when i flashed to another rom i tried to fix my speaker and i had to remove the speaker cover.... i never thought of a hardware problem but my GPS is functioning well again now.
Golf3-2.8 said:
very nice idea and saved my day/week/month.... i tried everything regarding software, firmware and rom but nothing would help.
at the same time when i flashed to another rom i tried to fix my speaker and i had to remove the speaker cover.... i never thought of a hardware problem but my GPS is functioning well again now.
Click to expand...
Click to collapse
Glad to help. :good:
Macropoutsis said:
I'm posting this as a guide to repairing your GPS at the hardware level after a teardown. So you decided to replace your broken screen, or put on some fancy back cover on your M8. Or even sent in your phone for repair just get it back with no GPS lock. You notice your phone sees satellites but can't get a fix/lock because the signal is to low. Simple fix. I've attached some images to help explain the process.
Click to expand...
Click to collapse
I couldn't find this copper tab (maybe the reason why mine isn't working), but I also couldn't see it in the video you linked to?
mccollumni said:
I couldn't find this copper tab (maybe the reason why mine isn't working), but I also couldn't see it in the video you linked to?
Click to expand...
Click to collapse
Yeah. Hard to see it in the video. That's just for teardown. Best is to check the pics. That tab should be at the top of the phone next to the power button. Unless yours is missing altogether. It is pretty flimsy.
Sent from my 831C using XDA Free mobile app
Saved my ass ! I changed my back cover and then my gps stop working ! Thx kind sir ! =)
Many thanks! My GPS was fixed.
*Arctic* said:
Saved my ass ! I changed my back cover and then my gps stop working ! Thx kind sir ! =)
Click to expand...
Click to collapse
You're welcome. Glad to help. :good:
t2k269 said:
Many thanks! My GPS was fixed.
Click to expand...
Click to collapse
Very good. Glad to hear.
You have saved my phone! Thank you very much!
hzw1199 said:
You have saved my phone! Thank you very much!
Click to expand...
Click to collapse
Your welcome :good:
Hey, thanks for the great information! Do you know of any fix for a metal tab that broke off completely?
300swolesquid said:
Hey, thanks for the great information! Do you know of any fix for a metal tab that broke off completely?
Click to expand...
Click to collapse
Ouch! Not sure. I think it's soldiered to the board. You may want to use a generic piece of metal and just sandwich it place. It just has to touch the case.
thanks man i will try it!!
kickz77 said:
thanks man i will try it!!
Click to expand...
Click to collapse
Hope everything goes well. :good:
300swolesquid said:
Hey, thanks for the great information! Do you know of any fix for a metal tab that broke off completely?
Click to expand...
Click to collapse
Any luck with your attempt to fix this with that tab gone? This also happened to me after I had swapped colors. Love the phone but I need GPS lock.
allgoodcory said:
Any luck with your attempt to fix this with that tab gone? This also happened to me after I had swapped colors. Love the phone but I need GPS lock.
Click to expand...
Click to collapse
Thank so much men, i have like half year without gps and this solution works for me. And for the ones that broke the metal tab like me i put a piece of aluminum paper and it works. Again thank you men i'm very happy
Espartan55 said:
Thank so much men, i have like half year without gps and this solution works for me. And for the ones that broke the metal tab like me i put a piece of aluminum paper and it works. Again thank you men i'm very happy
Click to expand...
Click to collapse
Glad to help :good:
Does anyone have a better picture of the tab? I think mine is broken off, but I can't tell from the blurry pictures. I tried stuffing aluminum foil in the gap, but I'm not sure if I'm touching the correct points. The phone is now locking a few satellites, but only barely enough - and it is super slow. This is better than without the foil, but not a ton better.
Thanks so much for sharing the info!
This fixed my no GPS locks after a back/case change.
I did break the metal clip slightly, so be very gentle, but kitchen foil did the trick.
ut.