Hi all,
Since I was beta testing fxdj's 6.1 clean rom and different versions, I have created this thread. I have sent few feedbacks already in 6.5 thread but since that was cluttering too much for that particular ROM, I've decided to put everything here and if fxdj wants, he can continue his further developments and updates on this thread. I am happy to rename the thread if needed later on.
DOWNLOAD LINKS NOW AVAILABLE FOR ANYONE WHO WANTS TO BETA-TEST THIS 6.1 ROM-IN-MAKING
All credit goes to:
Fxdj for cooking
Mangasora clean 6.1 rom
feropont's kitchen
So here is the feedback for 3 clean versions and 4th Version which is nearly release candidate 1.
Fxdj said: "Version 1 (click to download): Should have about 4MB more RAM, be stable but may be lagy?"
My beta test results are:
Flashed using fxdj sddl+ as .tsw file and it took 2 minutes to flash.
Boot status – Normal boot – no issues
Screen alignment – Very quick
Auto cab install – 35 seconds
[*]Issues: After cab installation, the phone soft-resets and then freezes at Green Welcomehead screen. Battery had to be pulled out in order to restart the phone.
[*]Issues: The home button does not take me back to my today screen. I am not sure if in 6.1 ROMs the home button is meant to take me out of any program and bring me to today screen. I am presuming ideally that is what it should do. But in this rom, it's not doing that.
Performed the hard reset once the phone was on
[*]RAM after hard reset: 151.07 mb
[*]ROM after hard reset: 330.12 mb
Comments: Works very fast. No lags, no hangs, no freezes, all programs work as normal. Wasn’t able to test the call quality, but since it’s radio 1600, it is the one that’s worked the best for me.
Fxdj said "Version 2 (click to download): Should have about 4MB more RAM, but I do not know it is stable in all conditions"
My beta test results are:
Flashed using fxdj sddl+ as .tsw file and it took 2 minutes to flash.
Boot status – Longer boot. ‘Toshiba’ logo stays for longer time, don’t get scared. It goes away in few more seconds.
Screen alignment – Very quick
Auto cab install – 25-30 seconds
[*]Issues: The home button does not take me back to my today screen. I am not sure if in 6.1 ROMs the home button is meant to take me out of any program and bring me to today screen. I am presuming ideally that is what it should do. But in this rom, it's not doing that.
Performed the hard reset once the phone was on
RAM after hard reset: 151.83 mb
[*]ROM after hard reset: 330.12 mb
Comments: Works very fast. No lags, no hangs, no freezes, all programs work as normal. Wasn’t able to test the call quality, but since it’s radio 1600, it is the one that’s worked the best for me. Although I don't see much difference between the first two versions, I think the second version is more snappier than first. The speed for both versions is outstanding.
Fxdj said: "Version 3 (click to download) is "connection" of both above. Should have about 8MB more ram"
My beta test results are:
Flashed using fxdj sddl+ as .tsw file and it took 2 minutes to flash.
Boot status – Normal boot
Screen alignment – Very quick
Auto cab install – 25-30 seconds
Issues: Home button issue again – it doesn’t take us to ‘today’ screen.
Performed the hard reset once the phone was on
RAM after hard reset: 155.61 mb
[*]ROM after hard reset: 330.12 mb
Comments: Works very fast. No lags, no hangs, no freezes, all programs work as normal. Wasn’t able to test the call quality, but since it’s radio 1600, it is the one that’s worked the best for me.
But, BUT – yes BUT : This version, seems a little only a tad slower than first 2. You can only notice this slowness when you have quite a few programs running. e.g. I had ALL the start menu apps running i.e. “MULTI-TASKING” and I found it only a little slow (in microseconds) – I won’t call it slow personally.
Fxdj said: "Version 4 (click to download) is fixed for SPB icons, is RAM optimized, has HTC menus, working home key"
My beta test results are:
Flashed using fxdj sddl+ as .tsw file and it took 4 minutes to flash.
Boot status – Normal boot
Screen alignment – Very quick
Auto cab install – nearly 2 minutes
Issues: SPB icons, still blank (same 3 icons) - see screenshot
Issues: HTC Menu - Since I've not used it so often, I might be wrong. But I think the start menu isn't displaying correctly- see screenshot
Issues: Your tweak icons are all in start menu. I have noticed they were in a folder generally in other versions - see screenshot
Performed the hard reset once the phone was on
RAM after hard reset: 145.85 mb
[*]ROM after hard reset: 295.97 mb
Comments: Home button fix works perfectly now! Works very fast. No lags, no hangs, no freezes, all programs work as normal. Wasn’t able to test the call quality, but since it’s radio 1600, it is the one that’s worked the best for me.
PLEASE NOTE:
I have followed a specific "safe" flashing procedure:
Hard reset current ROM
FLASH STOCK
Hard reset stock ROM
FLASH NEW ROM
Hard reset NEW ROM
Use it, test it, abuse it.
GO TO STEP 1
Reserved for screen shots etc.
It might be a good idea if users interested in a 6.1 ROM from fxdj, will come forward and show their interest here. Any suggestions for how the rom could be etc, would help fxdj to tweak further. Also big cooks like MIRO could tie-up with fxdj if possible to get some sort of sense (compressed one if possible) ROMs with 6.1 OS (with 155mb RAM to play, I think SENSE will flow smooooth!)
hi drupad2drupad,
thank you for opening this thread!
I am very interested in 6.1 ROMs as it seems that I get a much better battery life than with 6.5.x.
I would love a sense ROM with transcriber as an input method possible (the miro transcriber fix only works for 6.5.x ROMs).
Further it is maybe possible to somehow include a nicer built in lock screen. The problem here is that if you sync with exchange server the security policy forces you to use OS PIN lock screen of 6.1 and it is kinda ugly.
regards
drupad2drupad said:
Hi all,
Since I was beta testing fxdj's 6.1 clean rom and different versions, I have created this thread. I have sent few feedbacks already in 6.5 thread but since that was cluttering too much for that particular ROM, I've decided to put everything here and if fxdj wants, he can continue his further developments and updates on this thread. I am happy to rename the thread if needed later on.
PS: I am happy, very happy, to share the DOWLOAD LINKS with anyone and everyone who wants to test this for fxdj BUT, I will wait till fxdj confirms that he doesn't mind his work being shared. If he says he is OK, then I will add DOWNLOAD links for Beta-tests too
Click to expand...
Click to collapse
Thanks a lot drupad !
Of course I do not mind anybody other test the roms so You can share the links. More tests - more knowledge whether any of the roms is worthy to deal with in the future.
It should be added , the roms are based on Mangasora clean 6.1 rom so thanks Him for this rom and
prepared in feropont's kitchen so thanks Him too for His kitchen.
drupad2drupad said:
So here is the feedback for 3 clean versions:
Fxdj said: "Version 1: Should have about 4MB more RAM, be stable but may be lagy?"
My beta test results are:
[*]Issues: After cab installation, the phone soft-resets and then freezes at Green Welcomehead screen. Battery had to be pulled out in order to restart the phone.
[*]Performed the hard reset once the phone was on
[*]RAM after hard reset: 151.07 mb
[*]ROM after hard reset: 330.12 mb
[*]Comments: Works very fast. No lags, no hangs, no freezes, all programs work as normal. Wasn’t able to test the call quality, but since it’s radio 1600, it is the one that’s worked the best for me.
Click to expand...
Click to collapse
It is well known problem of home button in my roms . I guess I can fix it in the same way ( in any of these three roms ) I did it for my WM6.5 roms. I think there is something with OEM packages, I partially cleaned up few months ago when I started my adventures with tg01.
I am really astonished this version freezes. I hoped it would worked the best
It was one time freeze or every time it freezes ?
So we have 3 versions and question which should be the base for adding some software ( of course SPB shell as a first ).
Regards
fxdjacentyfxd
fxdjacentyfxd said:
Thanks a lot drupad !
Of course I do not mind anybody other test the roms so You can share the links. More tests - more knowledge whether any of the roms is worthy to deal with in the future.
It should be added , the roms are based on Mangasora clean 6.1 rom so thanks Him for this rom and
prepared in feropont's kitchen so thanks Him too for His kitchen.
It is well known problem of home button in my roms . I guess I can fix it in the same way ( in any of these three roms ) I did it for my WM6.5 roms. I think there is something with OEM packages, I partially cleaned up few months ago when I started my adventures with tg01.
I am really astonished this version freezes. I hoped it would worked the best
It was one time freeze or every time it freezes ?
So we have 3 versions and question which should be the base for adding some software ( of course SPB shell as a first ).
Regards
fxdjacentyfxd
Click to expand...
Click to collapse
The freeze with version 1 was only for once. It followed cab install process after flash. Once I removed battery and started my phone again, everything was normal then on. I re-flashed it later on, and then the problem was gone. Hence I dont think it was anything to do with the ROM. May be a bad flash? or me being impatient?
If I was to choose from all 3 version, I would choose definitely the ver3 as it's got highest FREE RAM. So when we use TF3D or SPB MS, we still would have plenty of free RAM. But it will be interesting to see if two things can be solved before:
a) home button (for which you already know the solution)
b) The 3 missing icons in settings after we install SPB MS on 6.1 ROMs. It's not just this rom, but all other 6.1 ROMs too, that when we intall SPB MS, the 3 icons in settings don't appear. This makes it 'appear' less functional.
I have tried SPB Shell in ver3 today and everything works perfectly normal. There is no lag as such, but I still feel it to be less smoother than ver 2.
Ver 2. was the smoothest in operation even with SPB MS on it. But since SPB is taking up to 12-14mb RAM when used with 3D acceleration, I think having extra RAM on ver 3. is beneficial.
drupad2drupad said:
b) The 3 missing icons in settings after we install SPB MS on 6.1 ROMs. It's not just this rom, but all other 6.1 ROMs too, that when we intall SPB MS, the 3 icons in settings don't appear. This makes it 'appear' less functional.
Click to expand...
Click to collapse
Could You give me more details because I have only heard about mentioned problems but I do not know what is exactly on :
1) Mentioned 3 icons disappear after SPB Shell installation at all or rather we have three "standard" settings icons ( gears icons or similar )
2) For what settings are the icons responsible for ?
Because I like clunky methods to solve this or other problems, maybe I would be able to do any kind of patch.
drupad2drupad said:
I have tried SPB Shell in ver3 today and everything works perfectly normal. There is no lag as such, but I still feel it to be less smoother than ver 2.
Ver 2. was the smoothest in operation even with SPB MS on it. But since SPB is taking up to 12-14mb RAM when used with 3D acceleration, I think having extra RAM on ver 3. is beneficial.
Click to expand...
Click to collapse
Yes, it may be true and caused by other way of increasing of RAM.
It would be good any other person(s) test it but even if we not await any additiona tests, I will release cooked rom but people do not complain then, if any problems occure
Regards
fxdjacentyfxd
drupad2drupad said:
b) The 3 missing icons in settings after we install SPB MS on 6.1 ROMs. It's not just this rom, but all other 6.1 ROMs too, that when we intall SPB MS, the 3 icons in settings don't appear. This makes it 'appear' less functional.
Click to expand...
Click to collapse
I checked it under simulator. I installed there SPB Shell 3.5.5. WM6.1 was so called
"WM 6.1 professional"
What I noticed is :
1)
a) In pure system settings->system we have 15 icons
b) In settings->system under SPB we have 14 icons. There is no icon "Encryption" available in pure system settings
2)
a) In pure system settings->personal we have 8 icons
b) In settings->personal under SPB we have 8 icons too
3)
a) In pure system settings->connections we have 6 icons
b) In settings->connections under SPB we have 5 icons. There is no "USB to PC" available in pure system settings.
So I can see 2 not 3 missed icons. Are above missed icons the same as in real not simulated WM 6.1 ?
Regards
fxdjacentyfxd
fxdjacentyfxd said:
I checked it under simulator. I installed there SPB Shell 3.5.5. WM6.1 was so called
"WM 6.1 professional"
What I noticed is :
1)
a) In pure system settings->system we have 15 icons
b) In settings->system under SPB we have 14 icons. There is no icon "Encryption" available in pure system settings
2)
a) In pure system settings->personal we have 8 icons
b) In settings->personal under SPB we have 8 icons too
3)
a) In pure system settings->connections we have 6 icons
b) In settings->connections under SPB we have 5 icons. There is no "USB to PC" available in pure system settings.
So I can see 2 not 3 missed icons. Are above missed icons the same as in real not simulated WM 6.1 ?
Regards
fxdjacentyfxd
Click to expand...
Click to collapse
Hi,
The icons we are missing are:
System,
Personal and
Connection
The main icons. We get a text that says "system", "Personal" and "connection"
but on top of them, it's just empty space. When you hit that space, it takes us to respective sub-menus in SPB.
I guess it might be because 'system', 'personal' and 'connection' are 3 different tabs on normal 6.1 ROMS and hence have no icons of their own anyway.
drupad2drupad said:
Hi,
The icons we are missing are:
System,
Personal and
Connection
The main icons. We get a text that says "system", "Personal" and "connection"
but on top of them, it's just empty space. When you hit that space, it takes us to respective sub-menus in SPB.
I guess it might be because 'system', 'personal' and 'connection' are 3 different tabs on normal 6.1 ROMS and hence have no icons of their own anyway.
Click to expand...
Click to collapse
I understand now. We have submenus but main three icons are absent - only texts say us what we have either "system" or "personal" or "connections".
Under simulator it looks better because instead any nice icon I have directory symbol connected with gear symbol. The same for all 3 mentioned icons.
So only problem seems to be how to change :
1) texts in Your case
2) this gear and directory symbols in simulator case
on any nice icons we want.
I will try to see what I can do with it. If under simulator it go ok, it should go ok in real system too.
Regards
fxdjacentyfxd
fxdjacentyfxd said:
I understand now. We have submenus but main three icons are absent - only texts say us what we have either "system" or "personal" or "connections".
Under simulator it looks better because instead any nice icon I have directory symbol connected with gear symbol. The same for all 3 mentioned icons.
So only problem seems to be how to change :
1) texts in Your case
2) this gear and directory symbols in simulator case
on any nice icons we want.
I will try to see what I can do with it. If under simulator it go ok, it should go ok in real system too.
Regards
fxdjacentyfxd
Click to expand...
Click to collapse
Yes that's the exact problem!
I am more than happy to test version 4 with these changes, your magic and SPB Shell installed Also, is it possible to not have 'happy face' implementation and instead a 'black patch' that matches task bar colour? That way, even if by mistake a user was to click that top right corner, it would do nothing at all (in background obviously it will show this 'black patch' instead of smiley face).
This http://forum.xda-developers.com/showthread.php?t=580568 shows a taskbar where such patch is applied. As I know you like making your own, but if not, you could cook this patch in.
OR
http://forum.xda-developers.com/showthread.php?t=812337
By doing this, you will more or less create a 'SPB ROM' - but with your 'double tap' implementation - it will be safe for users to still get start menu back if they tap twice on top left corner.
drupad2drupad said:
Yes that's the exact problem!
I am more than happy to test version 4 with these changes, your magic and SPB Shell installed Also, is it possible to not have 'happy face' implementation and instead a 'black patch' that matches task bar colour? That way, even if by mistake a user was to click that top right corner, it would do nothing at all (in background obviously it will show this 'black patch' instead of smiley face).
This http://forum.xda-developers.com/showthread.php?t=580568 shows a taskbar where such patch is applied. As I know you like making your own, but if not, you could cook this patch in.
OR
http://forum.xda-developers.com/showthread.php?t=812337
By doing this, you will more or less create a 'SPB ROM' - but with your 'double tap' implementation - it will be safe for users to still get start menu back if they tap twice on top left corner.
Click to expand...
Click to collapse
Hi drupad.
I did some experiment under simulator and changed "personal" icon ( gear + directory 'book' ) to other icon so I think that in real system there should be no any problems with it. I only have to find nice .png icons for "personal", "connections" and "system".
Maybe You can give me them ? I do not like to deal with graphic, brrrrr .
What concerns "face" , I explained You few weeks ago in any other thread that "face" is absolutely not needed in 6.1 so I am not going to use it at all. As people say, locking WM start menu in WM6.1 gives nothing as far as increase of RAM amount is concerned so why utilize it at all ? Apart from SPB menu we will "get" natural simple menu . If anyone does not want to have such menu it can be "mapped" to SPB menu as I know , in SPB shell settings. Maybe I did not quite understand Your concept ?
Rest of my software will be applied of course.
What do You think about HTC enlarge menu here ? You know my attitude to HTC but as You know I fixed existing htc enlarge menu .cab ( so can treat it as my software ) and can apply it as a .cab to all my .cab files in auto cab install.
I hope my explanations make You pleased
Regards
fxdjacentyfxd
fxdjacentyfxd said:
Hi drupad.
I did some experiment under simulator and changed "personal" icon ( gear + directory 'book' ) to other icon so I think that in real system there should be no any problems with it. I only have to find nice .png icons for "personal", "connections" and "system".
Maybe You can give me them ? I do not like to deal with graphic, brrrrr .
What concerns "face" , I explained You few weeks ago in any other thread that "face" is absolutely not needed in 6.1 so I am not going to use it at all. As people say, locking WM start menu in WM6.1 gives nothing as far as increase of RAM amount is concerned so why utilize it at all ? Apart from SPB menu we will "get" natural simple menu . If anyone does not want to have such menu it can be "mapped" to SPB menu as I know , in SPB shell settings.
Rest of my software will be applied of course.
What do You think about HTC enlarge menu here ? You know my attitude to HTC but as You know I fixed existing htc enlarge menu .cab ( so can treat it as my software ) and can apply it as a .cab to all my .cab files in auto cab install.
I hope my explanations make You pleased
Regards
fxdjacentyfxd
Click to expand...
Click to collapse
Hi fxdj!
Yes that all makes sense! I keep forgetting that winmo start menu saves nothing on 6.1 !!
It would be real treat to get those 3 icons. Could it be used from 6.5 ROM? Because 6.5 rom has 3 icons for these. That way it might save you time from re-sizing etc.
I also wanted to ask you if you cook 0321 version generally for your ROMs or do you prefer 1600? I was reading through radio changing kitchen thread and couldn't figure out if 0321 was giving best call quality over all for everyone.
HTC Enlarge menu_fxdjmod - Yes!! That will save us from coming across any small icons at all!! There is a 'today theme' that makes the actual line spacing in 6.1 a bit more finger friendly. I will try to dig that cab for you and put some screen shots. That will go well with HTC Enlarge menu. That will give us an option to change 'today theme' + make overall 6.1 icons smoother and finger friendly like 6.5 but won't affect the speed and RAM.
drupad2drupad said:
It would be real treat to get those 3 icons. Could it be used from 6.5 ROM? Because 6.5 rom has 3 icons for these. That way it might save you time from re-sizing etc.
Click to expand...
Click to collapse
I will see whether these are free files or rather icons in any dll(s)
drupad2drupad said:
I also wanted to ask you if you cook 0321 version generally for your ROMs or do you prefer 1600? I was reading through radio changing kitchen thread and couldn't figure out if 0321 was giving best call quality over all for everyone.
Click to expand...
Click to collapse
I utilized 321 radio in the past but now I have 1600.
321 the best ? Hard to say . Some people have GPS problems with it
and I can ensure You it is buggy as far as battery charging is concerned.
I wrote about it in my WM6.5 thread. Even with orignal battery driver
user can not see any progress in charging. Only after system restart one can see that battery has been charged. Anyway, like in case of my 6.5 rom I can issue it with two radios - 321 and 1600
drupad2drupad said:
HTC Enlarge menu_fxdjmod - Yes!! That will save us from coming across any small icons at all!! There is a 'today theme' that makes the actual line spacing in 6.1 a bit more finger friendly. I will try to dig that cab for you and put some screen shots. That will go well with HTC Enlarge menu. That will give us an option to change 'today theme' + make overall 6.1 icons smoother and finger friendly like 6.5 but won't affect the speed and RAM.
Click to expand...
Click to collapse
Ok, so I will apply HTC enlarge .cab
****************************
Already extracted needed .png files
Regards
fxdjacentyfxd
Hi.
drupad is my main tester and I sent Him today cooked rom for tests.
It should have the same functionality as my 6.5 rom. If anybody want to test it too ( maybe 3-pin methods will be required ) please let me know so I will publish link to it. drupad also has my permission to give link to anyone who will want it.
Regards
fxdjacentyfxd
fxdjacentyfxd said:
Hi.
drupad is my main tester and I sent Him today cooked rom for tests.
It should have the same functionality as my 6.5 rom. If anybody want to test it too ( maybe 3-pin methods will be required ) please let me know so I will publish link to it. drupad also has my permission to give link to anyone who will want it.
Regards
fxdjacentyfxd
Click to expand...
Click to collapse
Thanks for version 4 fxdj..
Version 4 is completely safe to flash.
I have updated feedback in post 1.
SCREENSHOTS now attached.
drupad2drupad said:
Thanks for version 4 fxdj..
Version 4 is completely safe to flash.
I have updated feedback in post 1.
SCREENSHOTS now attached.
Click to expand...
Click to collapse
Thanks drupad.
It seems it is time I have to flash it myself so that to fix found errors
but I will see maybe it will not be needed.
But as I can see from screenshots, system menu seems to be enlarged ? Start menu is not displayed correctly
because in my oppinion I did mistake and one can see my three directories in the start menu not original items.
I can also see that software that should be in separate directories is all in "programs".
I can see files from my "WOWHD" directory and my "Tools" directory. What about "Power" directory ? Is it absent too
and its files are in programs directory like other files ?
And what about Your feelings ? Is this rom prospective and worthy to deal with it to fix it ? It seems the forum dies
Anyway, people will be very pleased because of free RAM
Can I ask You about whole rom registry ( via fdcTaskManager ) ? Maybe I will find there some answers .
Maybe I will be able to prepare something before 16:00 so that You could test it - if You feel like of course
And finally, could You execute fxdjWM61SPBIconsSettingsFix.exe You have in \windows directory ? Tell me two things
after execution:
1) Did the software display any warning/error message
2) If it did not display anything , check whether "three settings" have still only descriptions without icons.
Regards
fxdjacentyfxd
fxdjacentyfxd said:
Thanks drupad.
It seems it is time I have to flash it myself so that to fix found errors
but I will see maybe it will not be needed.
But as I can see from screenshots, system menu seems to be enlarged ? Start menu is not displayed correctly
because in my oppinion I did mistake and one can see my three directories in the start menu not original items.
I can also see that software that should be in separate directories is all in "programs".
I can see files from my "WOWHD" directory and my "Tools" directory. What about "Power" directory ? Is it absent too
and its files are in programs directory like other files ?
And what about Your feelings ? Is this rom prospective and worthy to deal with it to fix it ? It seems the forum dies
Anyway, people will be very pleased because of free RAM
Can I ask You about whole rom registry ( via fdcTaskManager ) ? Maybe I will find there some answers .
Maybe I will be able to prepare something before 16:00 so that You could test it - if You feel like of course
And finally, could You execute fxdjWM61SPBIconsSettingsFix.exe You have in \windows directory ? Tell me two things
after execution:
1) Did the software display any warning/error message
2) If it did not display anything , check whether "three settings" have still only descriptions without icons.
Regards
fxdjacentyfxd
Click to expand...
Click to collapse
The 'power' directly comes as it self but not as an icon in 'Programs'. Its as an item in start menu.
I have attached whole start menu in screenshots with this one. You will notice that you can't see these icons when using without SPB. You can only see your 'loose' icons in Programs when we see through SPB menu.
In another screenshot - you can see that there is no 'fxdjWM61SPBIconsSettingsFix.exe ' file in /Windows directory. Could this be the reason why the icons are missing? May be it din't cook the file?
Let me know what you need to do with the Registry and I will attach screenshots for them too!
What worries me is the absence of everyone in the forum. I am getting a feeling that this forum is dying slowly. Probably because it's 'upgrade' time for most users and everyone is moving to different handsets (hopefully not iPhones!) I have my upgrade due in few weeks too but I will be around in forums from time to time as I've literally loved TG01 since day 1!
radio 321 is the best, reasonable for uk compared to the other official ROMs. Good luck
drupad2drupad said:
The 'power' directly comes as it self but not as an icon in 'Programs'. Its as an item in start menu.
I have attached whole start menu in screenshots with this one. You will notice that you can't see these icons when using without SPB. You can only see your 'loose' icons in Programs when we see through SPB menu.
Click to expand...
Click to collapse
Yes, I think it is my mistake. Intersting that what worked under 6.5 ( I mean copy to created directory ) does not work here but I fixed it. I hope
drupad2drupad said:
In another screenshot - you can see that there is no 'fxdjWM61SPBIconsSettingsFix.exe ' file in /Windows directory. Could this be the reason why the icons are missing? May be it din't cook the file?
Let me know what you need to do with the Registry and I will attach screenshots for them too!
Click to expand...
Click to collapse
Exactly ! Two files ( maybe ) are missing. One fxdjWM61SPBIconsSettingsFix.exe in \windows directory and fxdjWM61SPBIconsSettingsFix.lnk in \windows\startup directory ( can You check it ? ). I have problems with dsmeditor so maybe it is why it did not add the files to .dsm file.
I will do needed fixes tomorrow and I hope this version will be correct at last and I will be able to create new thread
and because I found my USB cable I will flash it too. Who knows, maybe it will be my favourite rom not 6.5.
I liked ffboy's 6.1 maybe I will like it too.
drupad2drupad said:
What worries me is the absence of everyone in the forum. I am getting a feeling that this forum is dying slowly. Probably because it's 'upgrade' time for most users and everyone is moving to different handsets (hopefully not iPhones!) I have my upgrade due in few weeks too but I will be around in forums from time to time as I've literally loved TG01 since day 1!
Click to expand...
Click to collapse
Yes, it is what I said some day that without enthusiasm of drupad and Oly this forum would die. On the other hand, many people seem to have their tg01 from relatively short time. Unfortunately, many people have them bricked irreversibly.
BTH. Is the upper bar "original" ? I mean it is the same as in Toshiba WM 6.1 system ? Mangasora ported sys from xx56 to xx57 and as I remember my tests of His rom, I did not like it too much. Is it possible to change upper bar to the same I have in WM 6.5 ?
I would not like to install any "android like" and others.
And why You do not like iPhone ? I do not like too it because .... I do not like it . The same as HTC software...
Regards
fxdjacentyfxd
fxdjacentyfxd said:
Yes, I think it is my mistake. Intersting that what worked under 6.5 ( I mean copy to created directory ) does not work here but I fixed it. I hope
Exactly ! Two files ( maybe ) are missing. One fxdjWM61SPBIconsSettingsFix.exe in \windows directory and fxdjWM61SPBIconsSettingsFix.lnk in \windows\startup directory ( can You check it ? ). I have problems with dsmeditor so maybe it is why it did not add the files to .dsm file.
I will do needed fixes tomorrow and I hope this version will be correct at last and I will be able to create new thread
and because I found my USB cable I will flash it too. Who knows, maybe it will be my favourite rom not 6.5.
I liked ffboy's 6.1 maybe I will like it too.
Yes, it is what I said some day that without enthusiasm of drupad and Oly this forum would die. On the other hand, many people seem to have their tg01 from relatively short time. Unfortunately, many people have them bricked irreversibly.
Regards
fxdjacentyfxd
Click to expand...
Click to collapse
more people will still visit the forum. i have been here from the very start when the roms were first made. the forum use to be very big then! but it has shrunk considerably. if you take a quick look at the hd2 forum, see how big it is! there are always 1000+ people browsing the hd2 forums at a time! (view at xda index) many other forums have large support aswell! soon my tg01 can become my flashing phone when i get a new one, so i'll be able to beta test.. i was actually going to order my Desire S on sunday, but o2 changed the tariffs round...
but soon i can test for all cooks but as you know fxdj.. i am busy these few weeks
Related
hello xda members,
how do i get a new windows on my mobile phone?
can somebody help me?
i'm a little confused about this here.. my friend told me i should look into this here but informiation is too much for me. we both got this trinity phone from our provider but functionality is poor ... i read somewhere it would have also gps? so how do i activate/use this?
cheers
hugo
some more details how to flash your phone.
Not that i am going to write you the whole procedure but...
1. Choose the rom with the proper language. WWE for English, FRA for French, etc.
2. There are several very good cooked roms in this forum. All will be WM6.1 with different 'borrowed' features from more advanced phones than ours, who is pretty 'old' in phone years..
3. download the rom package. It is normally ZIP or RAR. Extract them to your PC, have the phone connected (Active Sync must recognize your phone), and run the application to flash the rom. check the right boxes and it supposes to flash your rom. make sure your battery is at 50% at least, and do not stop this process until it finishes.
4. Some phones may get errors trying to flash. In that case you should make your phone start in IPL mode (push power, camera and stylus push the reset button for more than 1 second) until you get the right screen. I assume your phone is unlocked. If it is, and have hard SPL ready, see next item. If not, start doing some massive reading on the forum what needs to be done.
5. better read this link before you start: http://www.trinityguides.info/index.php . It's the best source for answering most of the questions you may have.
6. Don't ask people what rom is the best. You will get more answers than roms... You have to try and flash few until you get the one you like.
7. The best home plug-in currently is Manila 2D . Most cookers will have it with and without it. Try one with it, as it is better to get it cooked than added later. However, it is a matter of taste and memory management, so you may want to have one without.
8. Lastly- there are lite, medium and full blown roms. Again- it depends what your needs are.
So, it's a trial and error, my friend. Get ready for some sleepless nights.
Good luck
BigE
BigE said:
... So, it's a trial and error, my friend. Get ready for some sleepless nights.
Good luck
BigE
Click to expand...
Click to collapse
Nice reply BigE. Great to see more experienced xda users helping newcomers.
Mattser
WHY
Halpefull thread, thanks to all of us newcomers.
why some themes have diamond in the name and are in p3600 forum...what is the diference in skin and theme?
danilo01 said:
Halpefull thread, thanks to all of us newcomers.
why some themes have diamond in the name and are in p3600 forum...what is the diference in skin and theme?
Click to expand...
Click to collapse
Basically, "skin" and "theme" mean the same thing. They both refer to changing the screen display on a device.
One popular "theme" in the Trinity forum is making the screen display look like that of the HTC Diamond device. That is why the themes have the word "diamond" in their name.
Hope this helps,
Mattster.
i tought so
si needed for diamond skins to download manila or something?thanks
danilo01 said:
si needed for diamond skins to download manila or something?thanks
Click to expand...
Click to collapse
The Choice is yours.
Flash a Manila ROM and install m2dc customiser (some roms come with it already installed), you will have easy access to many, many themes that will change the appearance of your home screen and launch screens (messages, contacts, settings, etc.) It does use more memory and slow your phone down slightly, but for some that is not a problem.
Flash a non Manila ROM: you are more limited, but you can simply change the background artwork of your screen ("wallpaper") using .tsk files. There are also tweaking programs that allow you to change font sizes & colours. There is also pay for software out there (like spb mobile shell) which allows you to install themes, and xda does have threads for them.
If your main enjoyment is playing around with themes (as opposed to relying on the phone for memory intensive applications), I recommend you read as much as possible on the manila2d skin threads, then flash a Manila rom and use m2dc customiser. Searches on xda will explain all.
Hope this helps,
Mattster.
Aha thanks
XDA-Team_Manilla2D WORCKS SO FAR IT IS OK THANKS!
Hi guys,
first of all I would like to congratulate all of you for apps & info. The phone would be a disappointment for me if xda-developers didn't exist.
As I am a newbie in the winmo family I need some info. I want to install touch flo (I don't care which edition, as long as it is a cab) and I have some questions:
1. which cab should I try? Please don't propose any roms, I am not ready for that step yet . I want a stable and not battery-thirsty version, don't care if the best would be 2D or having to wait for touch flo 3D 2.
2. Can I install it on the memory card? If yes, do you know what are the pros/cons?
3. Will I be able to uninstall it and how?
4. Any other advice???
As I have noticed on the many touch flo related threads, there are a lot of people having the same questions. Please help us all!
Thanks in advance
My personal and honest opinion follows.
1 - Install nothing. Touch Flo sucks big time. (great job to the people who ported it to the x1, but the app itself sucks)
2 - See point 1.
3 - As far as i know it cannot be installed and you have to do a hard reset. My info is outdated though. Maybe with the newer version you can do it???? Again see point 1.
4 - See point 1.
Agreed
I ran it for a little while, but the performance was appauling, a cooked ROM with it should be faster because it's in the ROM and works differently.
Without TouchFlo my Windows folder takes 3 seconds to load, with it, the Windows folder takes well over 30 seconds.
I decided to just install some simple things like the task manager, the volume control and the mp3 trimmer. Kept everything else stock and just installed some nice HomeScreen plugins to make it do what i want.
Even if you get TouchFlo, they aren't all landscape compatible, only tyhe new TouchFlo 2(?) and as far as i know even with those some things like the cammera buttons (on screen, not physical) don't work.
vector4agn said:
1. which cab should I try? Please don't propose any roms, I am not ready for that step yet . I want a stable and not battery-thirsty version, don't care if the best would be 2D or having to wait for touch flo 3D 2.
2. Can I install it on the memory card? If yes, do you know what are the pros/cons?
3. Will I be able to uninstall it and how?
4. Any other advice???
As I have noticed on the many touch flo related threads, there are a lot of people having the same questions. Please help us all!
Thanks in advance
Click to expand...
Click to collapse
1- try itje's manilaHD cab. you'll find in this forum
2- no
3- yes, same way as all programs (always DO a backup before you install something huge or intrusive like tflo3d, I suggest spb backup)
4- I simply love tflo3d and suggest you to try a rom with new manila cooked in. It's faster for interface and for all the rest as cooked roms comes with all brand new build and drivers. go trough the forum, read and flash... don't be scared, just follow the procedures
alias_neo said:
Without TouchFlo my Windows folder takes 3 seconds to load, with it, the Windows folder takes well over 30 seconds.
Click to expand...
Click to collapse
lol, it's obvious... you have a 50% number of files in it... manila installs itself in windows directory -_-'
alias_neo said:
Even if you get TouchFlo, they aren't all landscape compatible, only tyhe new TouchFlo 2(?) and as far as i know even with those some things like the cammera buttons (on screen, not physical) don't work.
Click to expand...
Click to collapse
manila2 roms from itje and jackleung works flawlessy. please don't give incorrect info
guap said:
manila2 roms from itje and jackleung works flawlessy. please don't give incorrect info
Click to expand...
Click to collapse
Yeah, the ROMS work fine but the cabs outthere are crab. They are far from being stable, fast or useable.
I prefer the SE panel because all the information is on one page there without the need of flipping around.
My suggestion: If you really want TF3D, then flash your phone with a custom ROM (Itje's for English language, YYYYY has mad a fine ROM in German). That is the only way to have a fast and stable TF3D and also the option of using the panels!
Lol
guap said:
lol, it's obvious... you have a 50% number of files in it... manila installs itself in windows directory -_-'
manila2 roms from itje and jackleung works flawlessy. please don't give incorrect info
Click to expand...
Click to collapse
Well obviously I know this, otherwise why would I make a reference about how it takes significantly longer to load the windows folder?
But 100% more files? Surely then it takes 100% longer to load, not 1000%.
And I gave no incorrect info, I said "they aren't all landscape compatible, only tyhe new TouchFlo 2(?)" - The question mark means I wasn't entirely sure on the name, so it's Manila 2, all the same to me.
Also, "and as far as i know even with those some things like the cammera buttons (on screen, not physical) don't work." - This means I'm not entirely sure if this is the case and it should be looked into.
and Finally "manila2 roms from itje and jackleung works flawlessy." - I specifically remember the OP asking for a cab and not a ROM. Which is where my information was directed.
guap said:
lol, it's obvious... you have a 50% number of files in it... manila installs itself in windows directory -_-'
manila2 roms from itje and jackleung works flawlessy. please don't give incorrect info
Click to expand...
Click to collapse
hmm why would they install it in the windows folder and not in windows/manilla/ or something?
it's not a secret that filesystems on embedded devices are generally slow
Thanks
Thanks to everybody!
I'll probably backup everything and start trying cabs and roms.
alias_neo said:
But 100% more files? Surely then it takes 100% longer to load, not 1000%.
And I gave no incorrect info, I said "they aren't all landscape compatible, only tyhe new TouchFlo 2(?)" - The question mark means I wasn't entirely sure on the name, so it's Manila 2, all the same to me.
Also, "and as far as i know even with those some things like the cammera buttons (on screen, not physical) don't work." - This means I'm not entirely sure if this is the case and it should be looked into.
and Finally "manila2 roms from itje and jackleung works flawlessy." - I specifically remember the OP asking for a cab and not a ROM. Which is where my information was directed.
Click to expand...
Click to collapse
Well, I think Guap is mostly right and you simply know nothing what you really talking about. Let me give you some fact:
1. First, you got to understand it's "non rom" files under /Windows tax more on performance. A clean WM has only about ~20 "non rom" files under \Windows, TF3D 2 alone (not including all the complicated dependence like camera, album, audio manager ..etc) put 2219 files to /Window if using cab (TF3D 1 is ~ 2000 files). Therefore, it's normal it's take 1000% more time.
2. From your words, it simply show you did not try enough custom roms before you made yr comment. All my rom (from 2.2 to 2.7) do not have camera button problem. Obeviously your "as far as i know" isn't far enough.
I stated earlier in other thread already. If you really want to use TF3D (v1 or v2), pick an custom rom and forget about CAB. Using a cab for TF3D is simply hiting yr toe w/ a rock because you will be disappointed by the speed and compatibity issue.
duplicated post.
Hi,
Searched through FAQ, however didn't find the exact match, so here it is:
Polaris, WM6.0 Professional, ROM v. 1.28.457.2 WWE .
Standard Launcher number of icons isn't enough, so am trying to increase. There's a suggestion in FAQ to increase amount of keys by duplicating exisiting ones in a registry somewhere under in HKLM\software\HTC\ , however this supposedly includes word "manila" and I don't have that.
What I do have is HKLM\Software\HTC\HTCHome\Launcher and keys from 0 to 8.
So I've created '9', '10', '11', and duplicated values from existing ones, with program links that I put inside, and no change happened - still only 8 usable slots + 1 used to remove.
I've done soft reset, and also waited for couple of minutes as well - to no avail.
Would appreciate help on the subject.
__edwardo__ said:
Hi,
Searched through FAQ, however didn't find the exact match, so here it is:
Polaris, WM6.0 Professional, ROM v. 1.28.457.2 WWE .
Standard Launcher number of icons isn't enough, so am trying to increase. There's a suggestion in FAQ to increase amount of keys by duplicating exisiting ones in a registry somewhere under in HKLM\software\HTC\ , however this supposedly includes word "manila" and I don't have that.
What I do have is HKLM\Software\HTC\HTCHome\Launcher and keys from 0 to 8.
So I've created '9', '10', '11', and duplicated values from existing ones, with program links that I put inside, and no change happened - still only 8 usable slots + 1 used to remove.
I've done soft reset, and also waited for couple of minutes as well - to no avail.
Would appreciate help on the subject.
Click to expand...
Click to collapse
Sounds like you are using the HTC Home today plugin and as far as I remember, you can only have 8 program icons. Have a look for a program called claunch - you will be able to place it on your screen under htc home and be able to add many more programs for launching.
cr1960 said:
Sounds like you are using the HTC Home today plugin and as far as I remember, you can only have 8 program icons. Have a look for a program called claunch - you will be able to place it on your screen under htc home and be able to add many more programs for launching.
Click to expand...
Click to collapse
Thanks, I was using claunch before , but was hoping would be able to 'hack' HTC Home today.. But looks like no other choice.
Anyway, thanks for the suggestion.
you could also consdier flashing cooked ROM with M2D?
I feel this thread to be redundant. This thread basically do the same thing but with bigger success and some active modders:
http://forum.xda-developers.com/showthread.php?t=507697
As we don't need two of the same threads and I feel I don't have enough time to mod and give in to this myself and not many modders have stepped in. I'm sorry. Consider this thread a good idea but the goal is now in the hands of Zepiii. To hack the hell out of MS 3.0
Good luck Zepiii
Hi,
don't think anyone has missed the amazing pre release of this sweet ap!
I'm a mod freak and there are somethings i would like to change in this prog.
like the programs "tab" only has 3 rows. i want to make this 4. anyone with a bit of experience possibly from the 2.xx series know where to do it?
the configs are simple ZIP files. Just open the DAT file as a ZIP file or rename it to ZIP.
in order to edit the file you need to put in the password which is:
b0fm18zq
Maybe we could custom tailor it and post the modded DAT files collected here. Most of the 2.xx series of mods/skins are portable with a little or no modification except renaming of some picture files (same password in 2.xx). the possibilities are endless
Please remove or correct my post if I'm violating/doubleposting something here.
Regards
/Frewys
DAT Files content:
qa_layouts.dat - This contains only XML files. 61 to be precise lots of interesting stuff! (tried to change the Iconspacing in programs to 24. didn't get my 4 icons row though )
vp_menu_btn.dat - Built in Icons
va_misc_now.dat - Built in system icons
vpw_bkg_now - portrait
vlw_bkg_now.dat - mostly contact icons landscape
va_weather_64.dat - weather Icons largest with XML file
vp_bkg_now.dat - Menu frame
vl_bkg_now.dat - same but in landscape
va_profile.dat - media player and profile widget icons
RegHacks:
adding more pages to lifestyle screen
more buttons in collected start menu
change default sms client (bottom)
Memorysaving (no reghack)
interesting links in similar spirit:
SPB 3.0 today wallpaper
SPB 2.1 skins for inspiration
Great idea. I would also love to see this!!!
Is possible to customise the theme colors that available in mobile shell 3? The existing preferences are to dark(I want a white color scheme). Can we do it by editing a dat file(which?) or a registry hack?
dancer_69 said:
Is possible to customise the theme colors that available in mobile shell 3? The existing preferences are to dark(I want a white color scheme). Can we do it by editing a dat file(which?) or a registry hack?
Click to expand...
Click to collapse
Hi Dancer_69,
I don't know yet. I just played around with it last night before bed. I'm just a NB in this who poked around with this great ap after not being pleased with everything and curious on what could be achived so i dont have alla the answers this is a team effort. hopfully someone with the experience or knowhow checks this. In the meantime we have to do it by trial and error. and map it all as we go along
Regards
Frewys
good to know
I have discovered that Topaz enhanced menus works great with SPB MS 3.0 activated (and Manila installed but not activated in the today screen) so so far its a necessary evil to have Manila installed until we know possible witch file or reg settings are needed.
Regards
Frewys
i'll be waiting one this, happy moddings
adding more pages to lifestyle screen
this could be good for some. Found this over at modaco.com forum posted by turborepu quote:
"add more pages to lifestyle screen.. bg image pan works fine still
hklm/software/spb software house 2/spb mobile shell/widgets/homescreen
change "pagecount" to desired number.. i put 4. soft reset.."
supposedly its tested on 10 pages. the result is that when paned the wallpaper moves less then with three. If wallpaper size changed it will "smartfit" it to be the "correct" size.
haven't tried this myself yet three is plenty for me ATM
Hello
to improve finger friendly
please in new mobile shell v3
-imake an Sms menu , v2 uses windows Sms.
-alarm menu finger friendly
- apointments menu .....
V2 uses Windows Sms, alarm, apointmente
not very good needs the stylus...
Please make m.shellv3 completely finger friend with sms like iphone and alarm ....
Many thanks
and change applications
open sms with vito Sms ? it´s possible
change attachements ...
manyt hanks
When are you going to stop posting that little list of yours masrterk? Every thread/subforum on xda-developers and spb seems has one of your posts with the exact same thing.
masrterk said:
and change applications
open sms with vito Sms ? it´s possible
change attachements ...
manyt hanks
Click to expand...
Click to collapse
Hi masrterk,
I personally don't agree. i like to taylor make my GUI and of course the tastes differ. For instants.. i would like to have it pretty barebone and point to the prefered app of choice like resco contactmannager or glarm witch are the best! IMHO annyway
BUT if one could integreate them somehow that would be great if you had that choice.
right now its really easy just to link to those apps from the lifestyle screen.
Regards
Frewys
masrterk said:
and change applications
open sms with vito Sms ? it´s possible
change attachements ...
manyt hanks
Click to expand...
Click to collapse
You could use this from the legendary vijay555
http://www.vijay555.com/?Releases:VJBrisk
Remove calendar from professional layout?
Hi guys
i am trying to figure out how to do something that we were able to do in 2.1, but has been left unoptional in 3.0. I would like to get rid of the calendar on the pro screen. All I want to see is my upcoming appointments (if I have any). I don't want the screen cluttered with a pesky grid-style calendar. I am such a nooB at this it is silly, but here I am, messing around with .dat files......
Any help would be greatly appreciated!
It would be nice to create a backup/restore tool for the settings/today items/widgets/etc...
When updating the rom this would be VERY useful!
is the pre release official? where's the download?
looks good from the youtube demos
Anyone figure out the password for the DAT files yet? Seems they changed it from the 2.x releases
Great idea. I just took a peek inside today, thanks for the breakdown of what some of the .dats do.
I have a feeling we'll start seeing some custom widgets in no time.
and yes, the release is now official.
619619 said:
It would be nice to create a backup/restore tool for the settings/today items/widgets/etc...
When updating the rom this would be VERY useful!
Click to expand...
Click to collapse
There is already one in the SPB Shell settings, click the right softkey in settings and there it is, to the left of the exit button.
I tried it myself today, completely uninstalled mobile shell before I installed the official version, loaded the backup and everything was restored in the new version, included widgets and all
themirthfulswami said:
Anyone figure out the password for the DAT files yet? Seems they changed it from the 2.x releases
Click to expand...
Click to collapse
I am getting in fine using b0fm18zq
That said, I am still trying to figure out what I am doing........
wyldthng said:
Hi guys
i am trying to figure out how to do something that we were able to do in 2.1, but has been left unoptional in 3.0. I would like to get rid of the calendar on the pro screen. All I want to see is my upcoming appointments (if I have any). I don't want the screen cluttered with a pesky grid-style calendar. I am such a nooB at this it is silly, but here I am, messing around with .dat files......
Any help would be greatly appreciated!
Click to expand...
Click to collapse
I don't see the grid calendar on my pro screen anymore. On the pro settings page, choose "calendar", then change # of appointments to "as many as possible". After doing this, mine now shows the next two appointments.
I'm Kinda new to the forum and have only recently tried to add new apps and stuff to my X1.
There is a lot of information here about various versions of TF3D/Manilla and if I'm honest there is a little too much and I'm a bit lost amongst it all.
I should state that I have successfully installed a version of TF3D from here:
http://forum.xda-developers.com/showthread.php?t=442154
but have since removed it due to 1 or 2 issues (worst of which was really slow performance when looking at the photo albumn and not being able to see photos taken with the camera on the pictures tab). So I thought I'd ask for some advice before re-trying.
Question 1.
Which is the best version to install from a stability/features included point of view. Also I am not confident with burning a new ROM so would prefer just a .cab instrall.
Question 2.
For the install recomended is there a way to have it as a seperate panel rather than a today screen replacement. Are there any drawbacks to installing as a panel?
Question 3.
Are there any issues when switched to lanscape mode? (there was on the version I used) if so which modification would be compatable with the one recomended.
Finally if there are any other recomendations you have, for example, further modifications to make the TF3D experience more pleasurable, should I not worry about rom flashing and are there any alternatives to TF3D which could give me the polished interface i am looking for.
Cheers all
Check this post...
I had the same question, check out the below thread for your TF3D answers:
http://forum.xda-developers.com/showthread.php?t=514377
Regards
Sonny
Thanks but that leads me to one of the things i was confusedf about.
In the TF3D in Landscape mode thread it is stated that support for the app has been discontinued due to the release and porting of Manilla 2. So should I be using that? if so where can I get it?
Thanks to Sonny
Just wanted to bump this post to see if there was any other advice out there.
I did find the x-panel which look like it may have potential but just wasn't feature filled enough yet.
Cheers
Try TF3D 2 Beta 3
Ah! Just had a ton of pop-ups and now have to type all of this out again..!
Okay, will try to keep it short this time.
Try Daran_Clarke's TF3D 2 (Beta 3). It's taken from the new HTC Touch Pro 2. It includes the official HTC landscape view which works very well. You can install the CAB from here...
http://forum.xda-developers.com/showthread.php?t=448178
Some advice though. The Right Softkey function gets changed when you install this so the function is to take you to the Today screen, rather than the option above it on the screen (such as Contacts or Menu etc). You can change the Button settings but whenever you restart the machine, this gets reverted back, so that it takes you to the Today screen.
Himuraken was kind enough to point me in the direction of a .dll file which corrects this problem. It's called ManilaToday.dll. There will already be a file named this in the Windows directory on your phone, which you will need to delete. You can't delete this from your PC using ActiveSync. You need to use the FileExplorer on your X1 and browse to the Windows directory. Once there, select 'Menu' then 'Show All Files'. It may take a minute or so to display anything because there are so many files there. Delete ManilaToday.dll and then use ActiveSync to copy the new one across to that same location (Windows directory). You might need to set the Right Softkey button function to Right Softkey, but then when you restart it will keep this setting. You can get the new ManilaToday.dll from here...
http://forum.xda-developers.com/attachment.php?attachmentid=185239&d=1242263678
Now just if someone could make a Panel for this new TF3D 2! May be awkward tho, as I think there is a new Panel Manager with the new R3AA roms. The Panels designed for that don't work on R2 roms, such as the Growing Panel. So we need someone to make a Panel for this on both the new and old Panel manager! Doubt it'll happen though, and I doubt I'll have the R3AA rom for quite some time. O2 in the UK took literally about 5 months to release the R2 rom!
Regards
Sonny
Thanks again to Sonny I'll probably try that next.
I had i little bit of success with the original Touch-it install now though. I istalled the version 2 of the album app which seems to work much quicker that what is packaged in the Full CAB.
I still have 1 issue tho i wonder if anyone can help?
I want to be able to see all my pictures on the Photos and Videos tab without having to use album app. Currently only images in the my pictures tab display, I'd like to see images that have been taken with the camera whether they are stored in mypicture/camera/100xperia or on the memory card /dcim/100xperia/.
Is there anyway to change this?
Nevermind I sorted it now. Everything is working nice.
Now if only the lanscape app would work properly it would be perfect. Maybe a move to the install Sonny suggested will give me everything I'm after
sonnysoul said:
Ah! Just had a ton of pop-ups and now have to type all of this out again..!
......
Now just if someone could make a Panel for this new TF3D 2! May be awkward tho, as I think there is a new Panel Manager with the new R3AA roms. The Panels designed for that don't work on R2 roms, such as the Growing Panel. So we need someone to make a Panel for this on both the new and old Panel manager! Doubt it'll happen though, and I doubt I'll have the R3AA rom for quite some time. O2 in the UK took literally about 5 months to release the R2 rom!
Regards
Sonny
Click to expand...
Click to collapse
you can find TouchFlo 3d as a separate panel here http://forum.xda-developers.com/showpost.php?p=2878314&postcount=3
Musse_1 said:
you can find TouchFlo 3d as a separate panel here http://forum.xda-developers.com/showpost.php?p=2878314&postcount=3
Click to expand...
Click to collapse
That's provided you're using Beta 2 or earlier of the TF3D cab.