noob question - P3600 General

hello xda members,
how do i get a new windows on my mobile phone?
can somebody help me?
i'm a little confused about this here.. my friend told me i should look into this here but informiation is too much for me. we both got this trinity phone from our provider but functionality is poor ... i read somewhere it would have also gps? so how do i activate/use this?
cheers
hugo

some more details how to flash your phone.
Not that i am going to write you the whole procedure but...
1. Choose the rom with the proper language. WWE for English, FRA for French, etc.
2. There are several very good cooked roms in this forum. All will be WM6.1 with different 'borrowed' features from more advanced phones than ours, who is pretty 'old' in phone years..
3. download the rom package. It is normally ZIP or RAR. Extract them to your PC, have the phone connected (Active Sync must recognize your phone), and run the application to flash the rom. check the right boxes and it supposes to flash your rom. make sure your battery is at 50% at least, and do not stop this process until it finishes.
4. Some phones may get errors trying to flash. In that case you should make your phone start in IPL mode (push power, camera and stylus push the reset button for more than 1 second) until you get the right screen. I assume your phone is unlocked. If it is, and have hard SPL ready, see next item. If not, start doing some massive reading on the forum what needs to be done.
5. better read this link before you start: http://www.trinityguides.info/index.php . It's the best source for answering most of the questions you may have.
6. Don't ask people what rom is the best. You will get more answers than roms... You have to try and flash few until you get the one you like.
7. The best home plug-in currently is Manila 2D . Most cookers will have it with and without it. Try one with it, as it is better to get it cooked than added later. However, it is a matter of taste and memory management, so you may want to have one without.
8. Lastly- there are lite, medium and full blown roms. Again- it depends what your needs are.
So, it's a trial and error, my friend. Get ready for some sleepless nights.
Good luck
BigE

BigE said:
... So, it's a trial and error, my friend. Get ready for some sleepless nights.
Good luck
BigE
Click to expand...
Click to collapse
Nice reply BigE. Great to see more experienced xda users helping newcomers.
Mattser

WHY
Halpefull thread, thanks to all of us newcomers.
why some themes have diamond in the name and are in p3600 forum...what is the diference in skin and theme?

danilo01 said:
Halpefull thread, thanks to all of us newcomers.
why some themes have diamond in the name and are in p3600 forum...what is the diference in skin and theme?
Click to expand...
Click to collapse
Basically, "skin" and "theme" mean the same thing. They both refer to changing the screen display on a device.
One popular "theme" in the Trinity forum is making the screen display look like that of the HTC Diamond device. That is why the themes have the word "diamond" in their name.
Hope this helps,
Mattster.

i tought so
si needed for diamond skins to download manila or something?thanks

danilo01 said:
si needed for diamond skins to download manila or something?thanks
Click to expand...
Click to collapse
The Choice is yours.
Flash a Manila ROM and install m2dc customiser (some roms come with it already installed), you will have easy access to many, many themes that will change the appearance of your home screen and launch screens (messages, contacts, settings, etc.) It does use more memory and slow your phone down slightly, but for some that is not a problem.
Flash a non Manila ROM: you are more limited, but you can simply change the background artwork of your screen ("wallpaper") using .tsk files. There are also tweaking programs that allow you to change font sizes & colours. There is also pay for software out there (like spb mobile shell) which allows you to install themes, and xda does have threads for them.
If your main enjoyment is playing around with themes (as opposed to relying on the phone for memory intensive applications), I recommend you read as much as possible on the manila2d skin threads, then flash a Manila rom and use m2dc customiser. Searches on xda will explain all.
Hope this helps,
Mattster.

Aha thanks
XDA-Team_Manilla2D WORCKS SO FAR IT IS OK THANKS!

Related

New: Gloomy's 3.1b Manila2D Blueangel WM6.1 CE ROM (Build 20721 xip)

Gloomy's Manila2D Blueangel WM6.1 CE ROM (Build 20721 xip)
This rom is based heavily on Swampys work (many thanks mentor)
Change log from swampy´s M2D V3 is as follows:
In ROM file:
New features:
XIPed
UC enabled
Plus pack
Large Start Menu
Large Title bar
Larger Submenus
added games:
chinese chess (coolchix)
invaders
pacman2
pocketsudoku
added tools:
SSMaPa2d (to patch Manila2D, very interesting tool)
Haret-0.5.2 (to boot Linux, this is just the loader, you still need to have linux on the SD card)
removed: Pimbackup (SpbBackup is more comprehensive and reliable)
In ExtROM:
-Replaced default Manila2d skin with knobi´s skin http://forum.xda-developers.com/show...&postcount=693
Code:
01_ HTC_Enchasements.cab
02_HTC_AudioManager_2.0_1819.2129.cab
03_HTC_Album_2.0_1818.3829.4.cab
04_GoogleMaps.CAB
06_JBED_20080704_5.1.CAB
08_M2D_PIE_FIX.CAB
14_BnG_M2D_0.11.allDevKnobiSkin.CAB M2D blue skin (with some macosx icons)
15_gloomy_VOIP_WM61_SIP_Config_1.1.CAB (Voip .DLLs, no client)
16_CRASpbBackup2.cab (SpbBackup 2.0)
17_slick.cab
19_regedit.Mrln_ARM.cab
20_SMS-Chat_V1.16.cab
21_NetworkPlugin_1_0_30468_1.CAB
22_Office_6.1.20272-PPT-OneNote.cab
Downloads:
Gloomy V3.1b ROM for BA
ExtROM v.3.1b in .rar format
More info:
Backup all your data (other than SD Card) before flashing.
make sure on your SD card there is a folder called Exactly ExtROM containing the .cab and other files in the .rar
- Voip working, Just run Sip Config tool and in the proxy server enter for example sip.vyke.com (and you
can open a free account with them and get 1$ just go to www.vyke.com)
DO NOT install their client for Windows Mobile, it makes the blueangel very unstable.
I found a couple of bugs on the 3.1 image, main one that was not UC capable. That is corrected now with 3.1b
Also new ExtROM 3.1b unpack in root of SDcard and read the readme.txt
Screenshots:
Congrats on your new ROM. Please post some screen shots.
Off Topic: Either I've missed it or none has made one.. Anyone considering cooking a BA ROM with Voice Dialing?
Edit: WoW, very elegant BG. Thanks for the screen shots. Congrats again! I will place it on my list to test as soon as possible.
My pleasure.
I have experience cooking roms for linux devices but this is the first WinCE device I tackle.
Feedback is more than welcome!
Gloomy
rom
looking good Congrats and well done, Hope your gona fill my boots for a while Well till i finnish my touch diamond ROM, then "I'LL B BACK"
Best regards
swampy395
Hurra New Rom!
Will Definately give it a try.
Thanx.
markanthonypr said:
Congrats on your new ROM. Please post some screen shots.
Off Topic: Either I've missed it or none has made one.. Anyone considering cooking a BA ROM with Voice Dialing?
Edit: WoW, very elegant BG. Thanks for the screen shots. Congrats again! I will place it on my list to test as soon as possible.
Click to expand...
Click to collapse
Somewhere along WM5, a few cooks started putting Cyberon's Voice Commander in their roms, but because a lot of people preferred M$ Voice Command, they stopped (a quick reminder that VC cannot be cooked into a rom because it is licensed software)
@gloomyboy
What about the specs of the rom? (pagepool, Ramdisk - yes or no- , etc). Screenshots look good though... good job!
No RAM disk, about the pagepool I haven´t changed it from whatever Swampy had so he can better answer that question...
gloomyboy said:
No RAM disk, about the pagepool I haven´t changed it from whatever Swampy had so he can better answer that question...
Click to expand...
Click to collapse
look here for base spec http://forum.xda-developers.com/showthread.php?t=426286
gloomyboy said:
Gloomy's Manila2D Blueangel WM6.1 CE ROM (Build 20721 xip)
This rom is based heavily on Swampys work (many thanks mentor)
Change log from swampy´s M2D V3 is as follows:
In ROM file:
New features:
XIPed
UC enabled
Plus pack
Large Start Menu
Large Title bar
Larger Submenus
added games:
chinese chess (coolchix)
invaders
pacman2
pocketsudoku
added tools:
SSMaPa2d (to patch Manila2D, very interesting tool)
Haret-0.5.2 (to boot Linux, this is just the loader, you still need to have linux on the SD card)
removed: Pimbackup (SpbBackup is more comprehensive and reliable)
In ExtROM:
-Replaced default Manila2d skin with knobi´s skin http://forum.xda-developers.com/show...&postcount=693
Code:
01_ HTC_Enchasements.cab
02_HTC_AudioManager_2.0_1819.2129.cab
03_HTC_Album_2.0_1818.3829.4.cab
04_GoogleMaps.CAB
06_JBED_20080704_5.1.CAB
08_M2D_PIE_FIX.CAB
14_BnG_M2D_0.11.allDevKnobiSkin.CAB M2D blue skin (with some macosx icons)
15_gloomy_VOIP_WM61_SIP_Config_1.1.CAB (Voip .DLLs, no client)
16_CRASpbBackup2.cab (SpbBackup 2.0)
17_slick.cab
19_regedit.Mrln_ARM.cab
20_SMS-Chat_V1.16.cab
21_NetworkPlugin_1_0_30468_1.CAB
22_Office_6.1.20272-PPT-OneNote.cab
Downloads:
Gloomy V3.1b ROM for BA
ExtROM v.3.1b in .rar format
More info:
Backup all your data (other than SD Card) before flashing.
make sure on your SD card there is a folder called Exactly ExtROM containing the .cab and other files in the .rar
- Voip working, Just run Sip Config tool and in the proxy server enter for example sip.vyke.com (and you
can open a free account with them and get 1$ just go to www.vyke.com)
DO NOT install their client for Windows Mobile, it makes the blueangel very unstable.
I found a couple of bugs on the 3.1 image, main one that was not UC capable. That is corrected now with 3.1b
Also new ExtROM 3.1b unpack in root of SDcard and read the readme.txt
Screenshots:
Click to expand...
Click to collapse
The ROM has a very beautiful interface. I have tried it and my first outstanding concern is with Windows Media Player. Unlike other ROM versions that I have used which give the user the option of pausing a media file when another application is in used, the WMP in this ROM simply stops and does not resume playback. So Gloomy, your ROM will be really great if you can address this Problem.
The ROM has a very beautiful interface. I have tried it and my first outstanding concern is with Windows Media Player. Unlike other ROM versions that I have used which give the user the option of pausing a media file when another application is in used, the WMP in this ROM simply stops and does not resume playback. So Gloomy, your ROM will be really great if you can address this Problem.
hello there
have just flashed this rom. good performance but i am having a problem.
i wonder if it's just me or is wifi not working well? i can get a connection- though it does tend to get disconnected quite often NOT because of poor signal.
Also, even when it's connected, apps cannot seem to recognise the connection and therefore cannot get online.
this has happened to one wifi connection at home 100% of the times i try to connect and also happens about 50% of times that I try on another wifi connection of a different router.
any suggestions?
p.s. ive never had any problems with other roms- ive tried most of them...
thanks
yellowchilli said:
hello there
have just flashed this rom. good performance but i am having a problem.
i wonder if it's just me or is wifi not working well? i can get a connection- though it does tend to get disconnected quite often NOT because of poor signal.
Also, even when it's connected, apps cannot seem to recognise the connection and therefore cannot get online.
this has happened to one wifi connection at home 100% of the times i try to connect and also happens about 50% of times that I try on another wifi connection of a different router.
any suggestions?
p.s. ive never had any problems with other roms- ive tried most of them...
thanks
Click to expand...
Click to collapse
I had a similar issue with an older version of Swampy's rom. I am not certain of the reason why, but 20758 doesn't seem to have that issue anymore. One thing I did find out was that Weather Pannel was causing my connection to drop for no apparent reason. If you are using it, try to take it out of the Today Plugin and see if it still drops the connection.
egzthunder1 said:
I had a similar issue with an older version of Swampy's rom. I am not certain of the reason why, but 20758 doesn't seem to have that issue anymore. One thing I did find out was that Weather Pannel was causing my connection to drop for no apparent reason. If you are using it, try to take it out of the Today Plugin and see if it still drops the connection.
Click to expand...
Click to collapse
thanks i think ill try that. i think ill try taking it off with m2d configurator.
I've been using and flashing swampy's basic roms of the past 3 months and they didnt seem to have this problem.....
anyway, ill post back
egzthunder1
i think my problem is kinda different as my connection is really being dropped that often. but rather, while im connected, nothing can recognise the conenction.
getting online via activesync and gprs is fine, just not wifi- very strange.
ive tried taking away the weather panel with m2dconfig; deleting the country; disabling auto update and so on but they didn't help unfortunately.
so...any more ideas?
btw i installed wifi profiles, tried to use it but uninstalled it in the end because it didnt help and it's not something i need. surely....thats irrelevant to my issue...
wifi and windows media player
About wifi, make sure in wifi settings, powermode you tick off 'turn off wifi when not in use for 2 minutes'
Instead turn it on and off manually when needed.
I use AKwifitoogle very happily, will probably add it to next rom.
About windows media player...
Have you tried loading a different windows media player cab file (instead of the one provied with the ExtROM)
If that works better please report the link and I will be happy to try it and if better include in the next release
Thanks to all who have tried the rom and especially for your feedback!
Gloomy
gloomyboy said:
About wifi, make sure in wifi settings, powermode you tick off 'turn off wifi when not in use for 2 minutes'
Instead turn it on and off manually when needed.
I use AKwifitoogle very happily, will probably add it to next rom.
About windows media player...
Have you tried loading a different windows media player cab file (instead of the one provied with the ExtROM)
If that works better please report the link and I will be happy to try it and if better include in the next release
Thanks to all who have tried the rom and especially for your feedback!
Gloomy
Click to expand...
Click to collapse
hi gloomy
im pretty sure i didnt leave it idle for 2mins...but anyway ill give it a try.
egzthunder1 said:
Somewhere along WM5, a few cooks started putting Cyberon's Voice Commander in their roms, but because a lot of people preferred M$ Voice Command, they stopped (a quick reminder that VC cannot be cooked into a rom because it is licensed software)
Click to expand...
Click to collapse
Hey my friend! Sorry I haven't been very active these days. Been going crazy playing with HTC Home Icons and Flash Home screens. Amazing stuff out there!!. Actually, I'm trying to find Colored Icon Bar, similar to those that are being posted all over for Touch Diamond. Haven't found one that works on BA Yet. Perhaps, maybe our icons are individual images? Didn't think about that.
Thanks for the info about M$VC.
At present, I'm using Swampy's ROM. It's the only one not driving me crazy with the BT and WiFi Issues. Will be testing GloomyBoy's ROM soon.
Any help with the Colored Icon Bar ?
Icon bar
markanthonypr said:
Hey my friend! Sorry I haven't been very active these days. Been going crazy playing with HTC Home Icons and Flash Home screens. Amazing stuff out there!!. Actually, I'm trying to find Colored Icon Bar, similar to those that are being posted all over for Touch Diamond. Haven't found one that works on BA Yet. Perhaps, maybe our icons are individual images? Didn't think about that.
Thanks for the info about M$VC.
At present, I'm using Swampy's ROM. It's the only one not driving me crazy with the BT and WiFi Issues. Will be testing GloomyBoy's ROM soon.
Any help with the Colored Icon Bar ?
Click to expand...
Click to collapse
Hi there i tryed to use some with my M2Dv4 and it caused to many probs with M2D so scraped idear! If you look at sundream's rom he had a file Battery.dll that has color icons the setting are hklm\security\resover\bitmaps\ Well something like that? can't remember exactly. hope this helps
Here's what i'm useing on my touch Diamond rom study *.rgu and you should work it out!
regards
swampy395
swampy395 said:
Hi there i tried to use some with my M2Dv4 and it caused to many probs with M2D so scraped idear! If you look at sundream's ROM he had a file Battery.dll that has color icons the setting are hklm\security\resover\bitmaps\ Well something like that? can't remember exactly. hope this helps
Here's what I'm using on my touch Diamond ROM study *.rgu and you should work it out!
regards
swampy395
Click to expand...
Click to collapse
Thanks mate. I'll work on it later this afternoon. I just got a new 2400ah battery and I need to modify the Charging cradle so the phone can sit on it with the new thicker battery. Hope I can get 5 hrs use I've read otherwise, but I'll keep the hopes alive. EgzThunder is also a very resourceful man. I'm sure he has on his back pocket a working battery bar (Oh Don't think I'm being lazy)
markanthonypr said:
Thanks mate. I'll work on it later this afternoon. I just got a new 2400ah battery and I need to modify the Charging cradle so the phone can sit on it with the new thicker battery. Hope I can get 5 hrs use I've read otherwise, but I'll keep the hopes alive. EgzThunder is also a very resourceful man. I'm sure he has on his back pocket a working battery bar (Oh Don't think I'm being lazy)
Click to expand...
Click to collapse
5hrs what the hell do you do!!?? I have standard batt and with BT on all day linked to car audio + 1.5 hrs or so phone calls I get 2 days, and on stanby not used around 10 days a big batt like that would last me a week in use, It looks like you may have a charging prob, check your connections are clean hope this helps
regards
swampy395

Touch Flo

Hi guys,
first of all I would like to congratulate all of you for apps & info. The phone would be a disappointment for me if xda-developers didn't exist.
As I am a newbie in the winmo family I need some info. I want to install touch flo (I don't care which edition, as long as it is a cab) and I have some questions:
1. which cab should I try? Please don't propose any roms, I am not ready for that step yet . I want a stable and not battery-thirsty version, don't care if the best would be 2D or having to wait for touch flo 3D 2.
2. Can I install it on the memory card? If yes, do you know what are the pros/cons?
3. Will I be able to uninstall it and how?
4. Any other advice???
As I have noticed on the many touch flo related threads, there are a lot of people having the same questions. Please help us all!
Thanks in advance
My personal and honest opinion follows.
1 - Install nothing. Touch Flo sucks big time. (great job to the people who ported it to the x1, but the app itself sucks)
2 - See point 1.
3 - As far as i know it cannot be installed and you have to do a hard reset. My info is outdated though. Maybe with the newer version you can do it???? Again see point 1.
4 - See point 1.
Agreed
I ran it for a little while, but the performance was appauling, a cooked ROM with it should be faster because it's in the ROM and works differently.
Without TouchFlo my Windows folder takes 3 seconds to load, with it, the Windows folder takes well over 30 seconds.
I decided to just install some simple things like the task manager, the volume control and the mp3 trimmer. Kept everything else stock and just installed some nice HomeScreen plugins to make it do what i want.
Even if you get TouchFlo, they aren't all landscape compatible, only tyhe new TouchFlo 2(?) and as far as i know even with those some things like the cammera buttons (on screen, not physical) don't work.
vector4agn said:
1. which cab should I try? Please don't propose any roms, I am not ready for that step yet . I want a stable and not battery-thirsty version, don't care if the best would be 2D or having to wait for touch flo 3D 2.
2. Can I install it on the memory card? If yes, do you know what are the pros/cons?
3. Will I be able to uninstall it and how?
4. Any other advice???
As I have noticed on the many touch flo related threads, there are a lot of people having the same questions. Please help us all!
Thanks in advance
Click to expand...
Click to collapse
1- try itje's manilaHD cab. you'll find in this forum
2- no
3- yes, same way as all programs (always DO a backup before you install something huge or intrusive like tflo3d, I suggest spb backup)
4- I simply love tflo3d and suggest you to try a rom with new manila cooked in. It's faster for interface and for all the rest as cooked roms comes with all brand new build and drivers. go trough the forum, read and flash... don't be scared, just follow the procedures
alias_neo said:
Without TouchFlo my Windows folder takes 3 seconds to load, with it, the Windows folder takes well over 30 seconds.
Click to expand...
Click to collapse
lol, it's obvious... you have a 50% number of files in it... manila installs itself in windows directory -_-'
alias_neo said:
Even if you get TouchFlo, they aren't all landscape compatible, only tyhe new TouchFlo 2(?) and as far as i know even with those some things like the cammera buttons (on screen, not physical) don't work.
Click to expand...
Click to collapse
manila2 roms from itje and jackleung works flawlessy. please don't give incorrect info
guap said:
manila2 roms from itje and jackleung works flawlessy. please don't give incorrect info
Click to expand...
Click to collapse
Yeah, the ROMS work fine but the cabs outthere are crab. They are far from being stable, fast or useable.
I prefer the SE panel because all the information is on one page there without the need of flipping around.
My suggestion: If you really want TF3D, then flash your phone with a custom ROM (Itje's for English language, YYYYY has mad a fine ROM in German). That is the only way to have a fast and stable TF3D and also the option of using the panels!
Lol
guap said:
lol, it's obvious... you have a 50% number of files in it... manila installs itself in windows directory -_-'
manila2 roms from itje and jackleung works flawlessy. please don't give incorrect info
Click to expand...
Click to collapse
Well obviously I know this, otherwise why would I make a reference about how it takes significantly longer to load the windows folder?
But 100% more files? Surely then it takes 100% longer to load, not 1000%.
And I gave no incorrect info, I said "they aren't all landscape compatible, only tyhe new TouchFlo 2(?)" - The question mark means I wasn't entirely sure on the name, so it's Manila 2, all the same to me.
Also, "and as far as i know even with those some things like the cammera buttons (on screen, not physical) don't work." - This means I'm not entirely sure if this is the case and it should be looked into.
and Finally "manila2 roms from itje and jackleung works flawlessy." - I specifically remember the OP asking for a cab and not a ROM. Which is where my information was directed.
guap said:
lol, it's obvious... you have a 50% number of files in it... manila installs itself in windows directory -_-'
manila2 roms from itje and jackleung works flawlessy. please don't give incorrect info
Click to expand...
Click to collapse
hmm why would they install it in the windows folder and not in windows/manilla/ or something?
it's not a secret that filesystems on embedded devices are generally slow
Thanks
Thanks to everybody!
I'll probably backup everything and start trying cabs and roms.
alias_neo said:
But 100% more files? Surely then it takes 100% longer to load, not 1000%.
And I gave no incorrect info, I said "they aren't all landscape compatible, only tyhe new TouchFlo 2(?)" - The question mark means I wasn't entirely sure on the name, so it's Manila 2, all the same to me.
Also, "and as far as i know even with those some things like the cammera buttons (on screen, not physical) don't work." - This means I'm not entirely sure if this is the case and it should be looked into.
and Finally "manila2 roms from itje and jackleung works flawlessy." - I specifically remember the OP asking for a cab and not a ROM. Which is where my information was directed.
Click to expand...
Click to collapse
Well, I think Guap is mostly right and you simply know nothing what you really talking about. Let me give you some fact:
1. First, you got to understand it's "non rom" files under /Windows tax more on performance. A clean WM has only about ~20 "non rom" files under \Windows, TF3D 2 alone (not including all the complicated dependence like camera, album, audio manager ..etc) put 2219 files to /Window if using cab (TF3D 1 is ~ 2000 files). Therefore, it's normal it's take 1000% more time.
2. From your words, it simply show you did not try enough custom roms before you made yr comment. All my rom (from 2.2 to 2.7) do not have camera button problem. Obeviously your "as far as i know" isn't far enough.
I stated earlier in other thread already. If you really want to use TF3D (v1 or v2), pick an custom rom and forget about CAB. Using a cab for TF3D is simply hiting yr toe w/ a rock because you will be disappointed by the speed and compatibity issue.
duplicated post.

getting this phone, where to start...

hi,
i am getting this phone in a few weeks on vodafone(uk).
i have looked in a few threads but i was getting a bit lost so,
when getting this phone from new what would you do with it...
what would you change in the settings...
what programs would you remove...
what programs would you add...
any help would be great thanks.
Hi Markyc101, welcome to the forum/X1 Owners' club!
I too was a bit lost in the beginning, and didn't know where to start because of the large amount of detailed info.
Before you start doing anything really, you should read about the WinMo OS, and what a ROM is (and what it means to load a different one). Even though this is already pretty advanced, it's the most core aspect of the device and therefor I found it a logical place to begin. This info, and other basics, can be found in the Wiki (a sticky thread if I'm not mistaking).
Moving on, the further changes (as I see it) fork into two categories: appearance & functionality.
Appearance can be tweaked with SKtools (really hardcore, i.e. setting the width of scroll bars in pixels) and other tools that modify the registry. There are also some more gentle options, like skins etc.
Functionality can be added by numerous programs, it's really so diverse it's easier to start at the goal than the source. With this I mean there are too many programs to list, specify what you want to do (i.e. navigate, use phone as flashlight, play sweet video's, etc) then people can be of help.
Don't ask us what WE would add/remove, as this doesn't neccessarily apply to you. Furthermore, tip for your next forum post: the more specific, the more answers you'll get!
Good luck, post back when you know better what you want.
I think these threads will help you a little.. Im also first time using this kind of phone (Windows Mobile).. Hang out over here a little and you'll naturally know more
XPERIA X1 LIBRARY: All available ROMS RADIOS FLASHING TOOLS TUTORIALS APPS
X1 programs, panels, tweaks, fixes [COLLECTION]
settings... Start > Settings [Probably changing Owner Info & About]
what programs would you remove... NONE I guess
what programs would you add...
^Program i used^
S2U2 (Slide to unlock 2)
S2P (slide to play)
Resco File explorer (useful)
Resco Photo viewer
G-Alarm
hTorch (turns your camera light become a torch light)
ClearTemp
FingerKeyboard2
MyMobiler (see & control your phone from PC)
PocketMechanic
PMHSoftReset (Restart your phone)
WIMP (track your phone if lost)
XperiaTweak (useful)
Beauty up taskbar with SE icons - AnX1 tsowentaskbar3v1.4 SE vB1.3
FakeCall - need to go but couldnt find a reason? Fake a call then =)
PPCPimBackup
Most of them you can get it from this forum, try searching it.. Or you can go IPmart forum or freewarepocketpc.net
xperia newbs
markyc101 said:
hi,
i am getting this phone in a few weeks on vodafone(uk).
Click to expand...
Click to collapse
Congrats! I just ordered mine today, to replace my Fuze.
thanks dancemacabre that was what i was after,
some of those programs look really good i will have to check them out.
if anybody else has any good programs i should check out please let me know.
i am not very techy but i would like some flashy new things on my phone.
thanks,
I'm planning to buy this phone too This thread is quite interesting
But when I see the Official ROMs thread for Xperia X1, all I see are codes (names) of the roms :-s
But is there a releaselog with the updates? So I can check the improvements/updates with the ROMs.
Probably one of the first I would install is Advanced Config... for me way more functionality than Xperia Tweak... its a must have...
TBH the more you play with your phone and figure out what you want to do with it then do a search based on those goals the more personalised and indespensible it will become...
This is a great phone, bet u will like it replying with my x1 with wifi now..
Imo, TouchFlo3D is good n flashy but its laggy.. and i prefer the default panel as its clean n easy to see
If you really wan a taste of TouchFlo, u can go over the ROM sub-forum and look for itje 's Touch-It v4.5. There're step by step tutorial provided for the installation. Remember to back up always
N a little tips, put your mp3 for ringtones in My Documents in storage card. X1 can detect the folder and u wont need to put ur mp3 in the phone itself!
That's all! Have a nice day
exactly the thread i was looking 4!

People Tab

Hi all,
Newbie here
EX iPhone 3g user now HD user
I would like to ask, is it possible to change the People Tab on the HD to one like on the Touch Pro2 as an example.
I would prefer to have squares of faces than the flip faces that there are now.
all the best...
Any help is appreciated.
chill.
If I understand you correctly, you are referring to the difference in Contact tabs between Manila 2.1 (also known as HTC's TouchFlo 3D), and Manila 2.5 (known as HTC Sense), which will come out on the new HTC devices such as the Leo (also known as the Touch HD2).
As far as I know, the only way to use the new interface is to flash a ROM that has Manila 2.5.
I currently use Dutty's Leo R6 with WM6.5 and Manila 2.5. I really like it.
You can find it here. You'll have to register to be able to download it.
BTW - Welcome to the forum!!!!!!
Thanks Chris Cross,
This is what I am looking for.
Hope I have explained it right.
Not sure what Manilla 2.1 or 2.5 are, but thanks.
If I was to install the Dutty rom, would I loose any features ? Could I return to Original rom if I needed ?
Sorry for too many questions..
chill....
Yes, that is a picture of Manila 2.5.
Okay, I'll explain what Manila is.
Windows Mobile phones have a generic windows interface. HTC came up with their own layout and called it Manila. The more common name was TouchFlo. First was TouchFlo 2D, then came TouchFlo 3D, and now the new one is called HTC Sense (I guess they wanted to change the name now. ). In terms of your phone, you will see that the name Manila is still used (for example in registry settings etc.).
So, when you start your phone, it automatically goes into the Manila layout from HTC. In other words, the whole concept of having the slider at the bottom which takes you to the different tabs (and each of their sub-menus) etc.. is the Manila interface. Other Windows Mobile phones that are not from HTC don't have that (unless they have tried to copy the concept).
So, Manila version 2.1 (=TouchFlo 3D) had a Contacts tab with the little slider on the right, to switch between contacts (or you could flip through them too). Now, Manila 2.5 (which ships with the new HTC phones) changed that layout to look like what you are referring to - i.e. the big square pictures. You see 9 right away, and if you flip up, then 6 more appear for a total of 15. That is just one of the layout changes that are new in Manila 2.5. You will also see a new change in the Home tab, where below the clock, you now have Quick Links. They also look like squares and you can link them to a contact or a program for quick access directly from the home tab. Like I said, there are several new changes like that in Manila 2.5
I'll leave it at that for now. I need to stop for a second, but I'll come back to this same post and give you some info on flashing a new rom.
EDIT: see post below for info on flashing roms
chill today said:
.... If I was to install the Dutty rom, would I loose any features ? Could I return to Original rom if I needed ?....
Click to expand...
Click to collapse
Flashing a new rom means that you will completely erase the entire drive on the phone and you will install a brand new system. So... yes, you will lose everything that is in the internal storage (but not in the SD card).
You can go back to the rom your phone came with (referred to as a "stock" rom). To do that, you would have to flash (= install) the stock rom, and once again, you would lose everything you have at that point and you would end up with your phone as it came out of the box.
There is also backup software you can buy to backup all your programs, files etc.. in case you ever flash the stock rom again and you want things the way they are today. As far as I know, you cannot (or at least - should not) use that backup file on a rom other than the one that was installed when the backup file was created.
I have had my HD for 11 months. I flashed a new rom for the first time about 2 weeks after buying my HD. I think it is totally worth it. There are a lot of rom cooks out there that do a great job at making solid, stable roms. Dutty is definitely among the most well known and respected for the quality of work he does. He tries to keep his roms as close to stock as possible, but he makes changes that improve the speed and overall user-friendliness of the rom.
You do have to keep in mind, that if you flash a new rom with Manila 2.5 and Windows Mobile 6.5, some things might not work 100% right away because those are new releases. Dutty is constantly updating his rom to fix any known issues. Whenever an update is made, you flash that updated rom - and once again it means you lose your settings. But, the benefits of having a nicer rom outweigh the cons of having to set up your phone as you like it again. Eventually, the rom becomes really stable and you can go months without needing to flash anything.
If you are interested in flashing Dutty's new rom, let me know and I can give you links that explain how to do that.
All sounds very interesting. I'll chew on this a little.
Its not like I am unhappy with the HD, but just the People tab is a little frustrating to use.
I'll have a good look over at the roms section, and if I do give it a shot, I'll be knocking
I have flashed a HTC Touch before. A bit scary doing it, but went OK in the end.
The phone was freezing up, and was out of warrenty, so nowt to lose.
If its a similar process, then not to scary after all.
thanks
chill......
Yeah, it's the same thing. It's not too scary, but you just have to make sure you read about how to do it the first time, so that you don't make big mistakes. Technically, you could turn your phone into a brick (i.e. permanently dead), but that's really only if you somehow cut power to the phone during the process (e.g. if you unplug the cord or start with a low battery). If you just follow the steps - you'll be fine, and it will take about 10 minutes of actual flashing time. Once you have done it, you realize it is no big deal.
Check out the ROM threads - especially this tutorial!!! Depending on what type of ROM you have right now, you might need to do extra steps before flashing a newer version ROM. It is all explained in that tutorial. And Dutty's latest Leo R6 ROM can be found here. You can follow any developments or bug reports and fixes etc. regarding Dutty's Leo ROM in this thread.
Also, you might want to look and see if your stock ROM is available for download (in case you later want to go back to it - but I doubt you will). You can also go back to other stock ROMs if you want.
Just ask if you have questions.
Thanks a lot.
I've only been here 5 minutes and all this help. Nice place here.
There are Lots of Roms, so would need to chose carefully. I have been trying SPB Mobile Shell, which is quite nice. Not a full replacement rom, but a nice touch.
Thanks again, I will read on.
chill.......
Seems my question has been asked before.Contacts
Any freeware versions of a program similar.
chill......
chill today said:
Seems my question has been asked before.Contacts
Any freeware versions of a program similar.
chill......
Click to expand...
Click to collapse
Since I've never used one, I am not too familiar with freeware for it. But, I did find this website. Their program "Avatar" might be what you are looking for. The author also has a thread for Avatar on XDA Forums. It definitely seems worth the try.
Thanks again Chris Cross,
I will try them today, cheers for the link.
chill......

[ROM] fxdjacentyfxd's 6.1 clean ROM - feedback/beta tests

Hi all,
Since I was beta testing fxdj's 6.1 clean rom and different versions, I have created this thread. I have sent few feedbacks already in 6.5 thread but since that was cluttering too much for that particular ROM, I've decided to put everything here and if fxdj wants, he can continue his further developments and updates on this thread. I am happy to rename the thread if needed later on.
DOWNLOAD LINKS NOW AVAILABLE FOR ANYONE WHO WANTS TO BETA-TEST THIS 6.1 ROM-IN-MAKING
All credit goes to:
Fxdj for cooking
Mangasora clean 6.1 rom
feropont's kitchen
So here is the feedback for 3 clean versions and 4th Version which is nearly release candidate 1.
Fxdj said: "Version 1 (click to download): Should have about 4MB more RAM, be stable but may be lagy?"
My beta test results are:
Flashed using fxdj sddl+ as .tsw file and it took 2 minutes to flash.
Boot status – Normal boot – no issues
Screen alignment – Very quick
Auto cab install – 35 seconds
[*]Issues: After cab installation, the phone soft-resets and then freezes at Green Welcomehead screen. Battery had to be pulled out in order to restart the phone.
[*]Issues: The home button does not take me back to my today screen. I am not sure if in 6.1 ROMs the home button is meant to take me out of any program and bring me to today screen. I am presuming ideally that is what it should do. But in this rom, it's not doing that.
Performed the hard reset once the phone was on
[*]RAM after hard reset: 151.07 mb
[*]ROM after hard reset: 330.12 mb
Comments: Works very fast. No lags, no hangs, no freezes, all programs work as normal. Wasn’t able to test the call quality, but since it’s radio 1600, it is the one that’s worked the best for me.
Fxdj said "Version 2 (click to download): Should have about 4MB more RAM, but I do not know it is stable in all conditions"
My beta test results are:
Flashed using fxdj sddl+ as .tsw file and it took 2 minutes to flash.
Boot status – Longer boot. ‘Toshiba’ logo stays for longer time, don’t get scared. It goes away in few more seconds.
Screen alignment – Very quick
Auto cab install – 25-30 seconds
[*]Issues: The home button does not take me back to my today screen. I am not sure if in 6.1 ROMs the home button is meant to take me out of any program and bring me to today screen. I am presuming ideally that is what it should do. But in this rom, it's not doing that.
Performed the hard reset once the phone was on
RAM after hard reset: 151.83 mb
[*]ROM after hard reset: 330.12 mb
Comments: Works very fast. No lags, no hangs, no freezes, all programs work as normal. Wasn’t able to test the call quality, but since it’s radio 1600, it is the one that’s worked the best for me. Although I don't see much difference between the first two versions, I think the second version is more snappier than first. The speed for both versions is outstanding.
Fxdj said: "Version 3 (click to download) is "connection" of both above. Should have about 8MB more ram"
My beta test results are:
Flashed using fxdj sddl+ as .tsw file and it took 2 minutes to flash.
Boot status – Normal boot
Screen alignment – Very quick
Auto cab install – 25-30 seconds
Issues: Home button issue again – it doesn’t take us to ‘today’ screen.
Performed the hard reset once the phone was on
RAM after hard reset: 155.61 mb
[*]ROM after hard reset: 330.12 mb
Comments: Works very fast. No lags, no hangs, no freezes, all programs work as normal. Wasn’t able to test the call quality, but since it’s radio 1600, it is the one that’s worked the best for me.
But, BUT – yes BUT : This version, seems a little only a tad slower than first 2. You can only notice this slowness when you have quite a few programs running. e.g. I had ALL the start menu apps running i.e. “MULTI-TASKING” and I found it only a little slow (in microseconds) – I won’t call it slow personally.
Fxdj said: "Version 4 (click to download) is fixed for SPB icons, is RAM optimized, has HTC menus, working home key"
My beta test results are:
Flashed using fxdj sddl+ as .tsw file and it took 4 minutes to flash.
Boot status – Normal boot
Screen alignment – Very quick
Auto cab install – nearly 2 minutes
Issues: SPB icons, still blank (same 3 icons) - see screenshot
Issues: HTC Menu - Since I've not used it so often, I might be wrong. But I think the start menu isn't displaying correctly- see screenshot
Issues: Your tweak icons are all in start menu. I have noticed they were in a folder generally in other versions - see screenshot
Performed the hard reset once the phone was on
RAM after hard reset: 145.85 mb
[*]ROM after hard reset: 295.97 mb
Comments: Home button fix works perfectly now! Works very fast. No lags, no hangs, no freezes, all programs work as normal. Wasn’t able to test the call quality, but since it’s radio 1600, it is the one that’s worked the best for me.
PLEASE NOTE:
I have followed a specific "safe" flashing procedure:
Hard reset current ROM
FLASH STOCK
Hard reset stock ROM
FLASH NEW ROM
Hard reset NEW ROM
Use it, test it, abuse it.
GO TO STEP 1
Reserved for screen shots etc.
It might be a good idea if users interested in a 6.1 ROM from fxdj, will come forward and show their interest here. Any suggestions for how the rom could be etc, would help fxdj to tweak further. Also big cooks like MIRO could tie-up with fxdj if possible to get some sort of sense (compressed one if possible) ROMs with 6.1 OS (with 155mb RAM to play, I think SENSE will flow smooooth!)
hi drupad2drupad,
thank you for opening this thread!
I am very interested in 6.1 ROMs as it seems that I get a much better battery life than with 6.5.x.
I would love a sense ROM with transcriber as an input method possible (the miro transcriber fix only works for 6.5.x ROMs).
Further it is maybe possible to somehow include a nicer built in lock screen. The problem here is that if you sync with exchange server the security policy forces you to use OS PIN lock screen of 6.1 and it is kinda ugly.
regards
drupad2drupad said:
Hi all,
Since I was beta testing fxdj's 6.1 clean rom and different versions, I have created this thread. I have sent few feedbacks already in 6.5 thread but since that was cluttering too much for that particular ROM, I've decided to put everything here and if fxdj wants, he can continue his further developments and updates on this thread. I am happy to rename the thread if needed later on.
PS: I am happy, very happy, to share the DOWLOAD LINKS with anyone and everyone who wants to test this for fxdj BUT, I will wait till fxdj confirms that he doesn't mind his work being shared. If he says he is OK, then I will add DOWNLOAD links for Beta-tests too
Click to expand...
Click to collapse
Thanks a lot drupad !
Of course I do not mind anybody other test the roms so You can share the links. More tests - more knowledge whether any of the roms is worthy to deal with in the future.
It should be added , the roms are based on Mangasora clean 6.1 rom so thanks Him for this rom and
prepared in feropont's kitchen so thanks Him too for His kitchen.
drupad2drupad said:
So here is the feedback for 3 clean versions:
Fxdj said: "Version 1: Should have about 4MB more RAM, be stable but may be lagy?"
My beta test results are:
[*]Issues: After cab installation, the phone soft-resets and then freezes at Green Welcomehead screen. Battery had to be pulled out in order to restart the phone.
[*]Performed the hard reset once the phone was on
[*]RAM after hard reset: 151.07 mb
[*]ROM after hard reset: 330.12 mb
[*]Comments: Works very fast. No lags, no hangs, no freezes, all programs work as normal. Wasn’t able to test the call quality, but since it’s radio 1600, it is the one that’s worked the best for me.
Click to expand...
Click to collapse
It is well known problem of home button in my roms . I guess I can fix it in the same way ( in any of these three roms ) I did it for my WM6.5 roms. I think there is something with OEM packages, I partially cleaned up few months ago when I started my adventures with tg01.
I am really astonished this version freezes. I hoped it would worked the best
It was one time freeze or every time it freezes ?
So we have 3 versions and question which should be the base for adding some software ( of course SPB shell as a first ).
Regards
fxdjacentyfxd
fxdjacentyfxd said:
Thanks a lot drupad !
Of course I do not mind anybody other test the roms so You can share the links. More tests - more knowledge whether any of the roms is worthy to deal with in the future.
It should be added , the roms are based on Mangasora clean 6.1 rom so thanks Him for this rom and
prepared in feropont's kitchen so thanks Him too for His kitchen.
It is well known problem of home button in my roms . I guess I can fix it in the same way ( in any of these three roms ) I did it for my WM6.5 roms. I think there is something with OEM packages, I partially cleaned up few months ago when I started my adventures with tg01.
I am really astonished this version freezes. I hoped it would worked the best
It was one time freeze or every time it freezes ?
So we have 3 versions and question which should be the base for adding some software ( of course SPB shell as a first ).
Regards
fxdjacentyfxd
Click to expand...
Click to collapse
The freeze with version 1 was only for once. It followed cab install process after flash. Once I removed battery and started my phone again, everything was normal then on. I re-flashed it later on, and then the problem was gone. Hence I dont think it was anything to do with the ROM. May be a bad flash? or me being impatient?
If I was to choose from all 3 version, I would choose definitely the ver3 as it's got highest FREE RAM. So when we use TF3D or SPB MS, we still would have plenty of free RAM. But it will be interesting to see if two things can be solved before:
a) home button (for which you already know the solution)
b) The 3 missing icons in settings after we install SPB MS on 6.1 ROMs. It's not just this rom, but all other 6.1 ROMs too, that when we intall SPB MS, the 3 icons in settings don't appear. This makes it 'appear' less functional.
I have tried SPB Shell in ver3 today and everything works perfectly normal. There is no lag as such, but I still feel it to be less smoother than ver 2.
Ver 2. was the smoothest in operation even with SPB MS on it. But since SPB is taking up to 12-14mb RAM when used with 3D acceleration, I think having extra RAM on ver 3. is beneficial.
drupad2drupad said:
b) The 3 missing icons in settings after we install SPB MS on 6.1 ROMs. It's not just this rom, but all other 6.1 ROMs too, that when we intall SPB MS, the 3 icons in settings don't appear. This makes it 'appear' less functional.
Click to expand...
Click to collapse
Could You give me more details because I have only heard about mentioned problems but I do not know what is exactly on :
1) Mentioned 3 icons disappear after SPB Shell installation at all or rather we have three "standard" settings icons ( gears icons or similar )
2) For what settings are the icons responsible for ?
Because I like clunky methods to solve this or other problems, maybe I would be able to do any kind of patch.
drupad2drupad said:
I have tried SPB Shell in ver3 today and everything works perfectly normal. There is no lag as such, but I still feel it to be less smoother than ver 2.
Ver 2. was the smoothest in operation even with SPB MS on it. But since SPB is taking up to 12-14mb RAM when used with 3D acceleration, I think having extra RAM on ver 3. is beneficial.
Click to expand...
Click to collapse
Yes, it may be true and caused by other way of increasing of RAM.
It would be good any other person(s) test it but even if we not await any additiona tests, I will release cooked rom but people do not complain then, if any problems occure
Regards
fxdjacentyfxd
drupad2drupad said:
b) The 3 missing icons in settings after we install SPB MS on 6.1 ROMs. It's not just this rom, but all other 6.1 ROMs too, that when we intall SPB MS, the 3 icons in settings don't appear. This makes it 'appear' less functional.
Click to expand...
Click to collapse
I checked it under simulator. I installed there SPB Shell 3.5.5. WM6.1 was so called
"WM 6.1 professional"
What I noticed is :
1)
a) In pure system settings->system we have 15 icons
b) In settings->system under SPB we have 14 icons. There is no icon "Encryption" available in pure system settings
2)
a) In pure system settings->personal we have 8 icons
b) In settings->personal under SPB we have 8 icons too
3)
a) In pure system settings->connections we have 6 icons
b) In settings->connections under SPB we have 5 icons. There is no "USB to PC" available in pure system settings.
So I can see 2 not 3 missed icons. Are above missed icons the same as in real not simulated WM 6.1 ?
Regards
fxdjacentyfxd
fxdjacentyfxd said:
I checked it under simulator. I installed there SPB Shell 3.5.5. WM6.1 was so called
"WM 6.1 professional"
What I noticed is :
1)
a) In pure system settings->system we have 15 icons
b) In settings->system under SPB we have 14 icons. There is no icon "Encryption" available in pure system settings
2)
a) In pure system settings->personal we have 8 icons
b) In settings->personal under SPB we have 8 icons too
3)
a) In pure system settings->connections we have 6 icons
b) In settings->connections under SPB we have 5 icons. There is no "USB to PC" available in pure system settings.
So I can see 2 not 3 missed icons. Are above missed icons the same as in real not simulated WM 6.1 ?
Regards
fxdjacentyfxd
Click to expand...
Click to collapse
Hi,
The icons we are missing are:
System,
Personal and
Connection
The main icons. We get a text that says "system", "Personal" and "connection"
but on top of them, it's just empty space. When you hit that space, it takes us to respective sub-menus in SPB.
I guess it might be because 'system', 'personal' and 'connection' are 3 different tabs on normal 6.1 ROMS and hence have no icons of their own anyway.
drupad2drupad said:
Hi,
The icons we are missing are:
System,
Personal and
Connection
The main icons. We get a text that says "system", "Personal" and "connection"
but on top of them, it's just empty space. When you hit that space, it takes us to respective sub-menus in SPB.
I guess it might be because 'system', 'personal' and 'connection' are 3 different tabs on normal 6.1 ROMS and hence have no icons of their own anyway.
Click to expand...
Click to collapse
I understand now. We have submenus but main three icons are absent - only texts say us what we have either "system" or "personal" or "connections".
Under simulator it looks better because instead any nice icon I have directory symbol connected with gear symbol. The same for all 3 mentioned icons.
So only problem seems to be how to change :
1) texts in Your case
2) this gear and directory symbols in simulator case
on any nice icons we want.
I will try to see what I can do with it. If under simulator it go ok, it should go ok in real system too.
Regards
fxdjacentyfxd
fxdjacentyfxd said:
I understand now. We have submenus but main three icons are absent - only texts say us what we have either "system" or "personal" or "connections".
Under simulator it looks better because instead any nice icon I have directory symbol connected with gear symbol. The same for all 3 mentioned icons.
So only problem seems to be how to change :
1) texts in Your case
2) this gear and directory symbols in simulator case
on any nice icons we want.
I will try to see what I can do with it. If under simulator it go ok, it should go ok in real system too.
Regards
fxdjacentyfxd
Click to expand...
Click to collapse
Yes that's the exact problem!
I am more than happy to test version 4 with these changes, your magic and SPB Shell installed Also, is it possible to not have 'happy face' implementation and instead a 'black patch' that matches task bar colour? That way, even if by mistake a user was to click that top right corner, it would do nothing at all (in background obviously it will show this 'black patch' instead of smiley face).
This http://forum.xda-developers.com/showthread.php?t=580568 shows a taskbar where such patch is applied. As I know you like making your own, but if not, you could cook this patch in.
OR
http://forum.xda-developers.com/showthread.php?t=812337
By doing this, you will more or less create a 'SPB ROM' - but with your 'double tap' implementation - it will be safe for users to still get start menu back if they tap twice on top left corner.
drupad2drupad said:
Yes that's the exact problem!
I am more than happy to test version 4 with these changes, your magic and SPB Shell installed Also, is it possible to not have 'happy face' implementation and instead a 'black patch' that matches task bar colour? That way, even if by mistake a user was to click that top right corner, it would do nothing at all (in background obviously it will show this 'black patch' instead of smiley face).
This http://forum.xda-developers.com/showthread.php?t=580568 shows a taskbar where such patch is applied. As I know you like making your own, but if not, you could cook this patch in.
OR
http://forum.xda-developers.com/showthread.php?t=812337
By doing this, you will more or less create a 'SPB ROM' - but with your 'double tap' implementation - it will be safe for users to still get start menu back if they tap twice on top left corner.
Click to expand...
Click to collapse
Hi drupad.
I did some experiment under simulator and changed "personal" icon ( gear + directory 'book' ) to other icon so I think that in real system there should be no any problems with it. I only have to find nice .png icons for "personal", "connections" and "system".
Maybe You can give me them ? I do not like to deal with graphic, brrrrr .
What concerns "face" , I explained You few weeks ago in any other thread that "face" is absolutely not needed in 6.1 so I am not going to use it at all. As people say, locking WM start menu in WM6.1 gives nothing as far as increase of RAM amount is concerned so why utilize it at all ? Apart from SPB menu we will "get" natural simple menu . If anyone does not want to have such menu it can be "mapped" to SPB menu as I know , in SPB shell settings. Maybe I did not quite understand Your concept ?
Rest of my software will be applied of course.
What do You think about HTC enlarge menu here ? You know my attitude to HTC but as You know I fixed existing htc enlarge menu .cab ( so can treat it as my software ) and can apply it as a .cab to all my .cab files in auto cab install.
I hope my explanations make You pleased
Regards
fxdjacentyfxd
fxdjacentyfxd said:
Hi drupad.
I did some experiment under simulator and changed "personal" icon ( gear + directory 'book' ) to other icon so I think that in real system there should be no any problems with it. I only have to find nice .png icons for "personal", "connections" and "system".
Maybe You can give me them ? I do not like to deal with graphic, brrrrr .
What concerns "face" , I explained You few weeks ago in any other thread that "face" is absolutely not needed in 6.1 so I am not going to use it at all. As people say, locking WM start menu in WM6.1 gives nothing as far as increase of RAM amount is concerned so why utilize it at all ? Apart from SPB menu we will "get" natural simple menu . If anyone does not want to have such menu it can be "mapped" to SPB menu as I know , in SPB shell settings.
Rest of my software will be applied of course.
What do You think about HTC enlarge menu here ? You know my attitude to HTC but as You know I fixed existing htc enlarge menu .cab ( so can treat it as my software ) and can apply it as a .cab to all my .cab files in auto cab install.
I hope my explanations make You pleased
Regards
fxdjacentyfxd
Click to expand...
Click to collapse
Hi fxdj!
Yes that all makes sense! I keep forgetting that winmo start menu saves nothing on 6.1 !!
It would be real treat to get those 3 icons. Could it be used from 6.5 ROM? Because 6.5 rom has 3 icons for these. That way it might save you time from re-sizing etc.
I also wanted to ask you if you cook 0321 version generally for your ROMs or do you prefer 1600? I was reading through radio changing kitchen thread and couldn't figure out if 0321 was giving best call quality over all for everyone.
HTC Enlarge menu_fxdjmod - Yes!! That will save us from coming across any small icons at all!! There is a 'today theme' that makes the actual line spacing in 6.1 a bit more finger friendly. I will try to dig that cab for you and put some screen shots. That will go well with HTC Enlarge menu. That will give us an option to change 'today theme' + make overall 6.1 icons smoother and finger friendly like 6.5 but won't affect the speed and RAM.
drupad2drupad said:
It would be real treat to get those 3 icons. Could it be used from 6.5 ROM? Because 6.5 rom has 3 icons for these. That way it might save you time from re-sizing etc.
Click to expand...
Click to collapse
I will see whether these are free files or rather icons in any dll(s)
drupad2drupad said:
I also wanted to ask you if you cook 0321 version generally for your ROMs or do you prefer 1600? I was reading through radio changing kitchen thread and couldn't figure out if 0321 was giving best call quality over all for everyone.
Click to expand...
Click to collapse
I utilized 321 radio in the past but now I have 1600.
321 the best ? Hard to say . Some people have GPS problems with it
and I can ensure You it is buggy as far as battery charging is concerned.
I wrote about it in my WM6.5 thread. Even with orignal battery driver
user can not see any progress in charging. Only after system restart one can see that battery has been charged. Anyway, like in case of my 6.5 rom I can issue it with two radios - 321 and 1600
drupad2drupad said:
HTC Enlarge menu_fxdjmod - Yes!! That will save us from coming across any small icons at all!! There is a 'today theme' that makes the actual line spacing in 6.1 a bit more finger friendly. I will try to dig that cab for you and put some screen shots. That will go well with HTC Enlarge menu. That will give us an option to change 'today theme' + make overall 6.1 icons smoother and finger friendly like 6.5 but won't affect the speed and RAM.
Click to expand...
Click to collapse
Ok, so I will apply HTC enlarge .cab
****************************
Already extracted needed .png files
Regards
fxdjacentyfxd
Hi.
drupad is my main tester and I sent Him today cooked rom for tests.
It should have the same functionality as my 6.5 rom. If anybody want to test it too ( maybe 3-pin methods will be required ) please let me know so I will publish link to it. drupad also has my permission to give link to anyone who will want it.
Regards
fxdjacentyfxd
fxdjacentyfxd said:
Hi.
drupad is my main tester and I sent Him today cooked rom for tests.
It should have the same functionality as my 6.5 rom. If anybody want to test it too ( maybe 3-pin methods will be required ) please let me know so I will publish link to it. drupad also has my permission to give link to anyone who will want it.
Regards
fxdjacentyfxd
Click to expand...
Click to collapse
Thanks for version 4 fxdj..
Version 4 is completely safe to flash.
I have updated feedback in post 1.
SCREENSHOTS now attached.
drupad2drupad said:
Thanks for version 4 fxdj..
Version 4 is completely safe to flash.
I have updated feedback in post 1.
SCREENSHOTS now attached.
Click to expand...
Click to collapse
Thanks drupad.
It seems it is time I have to flash it myself so that to fix found errors
but I will see maybe it will not be needed.
But as I can see from screenshots, system menu seems to be enlarged ? Start menu is not displayed correctly
because in my oppinion I did mistake and one can see my three directories in the start menu not original items.
I can also see that software that should be in separate directories is all in "programs".
I can see files from my "WOWHD" directory and my "Tools" directory. What about "Power" directory ? Is it absent too
and its files are in programs directory like other files ?
And what about Your feelings ? Is this rom prospective and worthy to deal with it to fix it ? It seems the forum dies
Anyway, people will be very pleased because of free RAM
Can I ask You about whole rom registry ( via fdcTaskManager ) ? Maybe I will find there some answers .
Maybe I will be able to prepare something before 16:00 so that You could test it - if You feel like of course
And finally, could You execute fxdjWM61SPBIconsSettingsFix.exe You have in \windows directory ? Tell me two things
after execution:
1) Did the software display any warning/error message
2) If it did not display anything , check whether "three settings" have still only descriptions without icons.
Regards
fxdjacentyfxd
fxdjacentyfxd said:
Thanks drupad.
It seems it is time I have to flash it myself so that to fix found errors
but I will see maybe it will not be needed.
But as I can see from screenshots, system menu seems to be enlarged ? Start menu is not displayed correctly
because in my oppinion I did mistake and one can see my three directories in the start menu not original items.
I can also see that software that should be in separate directories is all in "programs".
I can see files from my "WOWHD" directory and my "Tools" directory. What about "Power" directory ? Is it absent too
and its files are in programs directory like other files ?
And what about Your feelings ? Is this rom prospective and worthy to deal with it to fix it ? It seems the forum dies
Anyway, people will be very pleased because of free RAM
Can I ask You about whole rom registry ( via fdcTaskManager ) ? Maybe I will find there some answers .
Maybe I will be able to prepare something before 16:00 so that You could test it - if You feel like of course
And finally, could You execute fxdjWM61SPBIconsSettingsFix.exe You have in \windows directory ? Tell me two things
after execution:
1) Did the software display any warning/error message
2) If it did not display anything , check whether "three settings" have still only descriptions without icons.
Regards
fxdjacentyfxd
Click to expand...
Click to collapse
The 'power' directly comes as it self but not as an icon in 'Programs'. Its as an item in start menu.
I have attached whole start menu in screenshots with this one. You will notice that you can't see these icons when using without SPB. You can only see your 'loose' icons in Programs when we see through SPB menu.
In another screenshot - you can see that there is no 'fxdjWM61SPBIconsSettingsFix.exe ' file in /Windows directory. Could this be the reason why the icons are missing? May be it din't cook the file?
Let me know what you need to do with the Registry and I will attach screenshots for them too!
What worries me is the absence of everyone in the forum. I am getting a feeling that this forum is dying slowly. Probably because it's 'upgrade' time for most users and everyone is moving to different handsets (hopefully not iPhones!) I have my upgrade due in few weeks too but I will be around in forums from time to time as I've literally loved TG01 since day 1!
radio 321 is the best, reasonable for uk compared to the other official ROMs. Good luck
drupad2drupad said:
The 'power' directly comes as it self but not as an icon in 'Programs'. Its as an item in start menu.
I have attached whole start menu in screenshots with this one. You will notice that you can't see these icons when using without SPB. You can only see your 'loose' icons in Programs when we see through SPB menu.
Click to expand...
Click to collapse
Yes, I think it is my mistake. Intersting that what worked under 6.5 ( I mean copy to created directory ) does not work here but I fixed it. I hope
drupad2drupad said:
In another screenshot - you can see that there is no 'fxdjWM61SPBIconsSettingsFix.exe ' file in /Windows directory. Could this be the reason why the icons are missing? May be it din't cook the file?
Let me know what you need to do with the Registry and I will attach screenshots for them too!
Click to expand...
Click to collapse
Exactly ! Two files ( maybe ) are missing. One fxdjWM61SPBIconsSettingsFix.exe in \windows directory and fxdjWM61SPBIconsSettingsFix.lnk in \windows\startup directory ( can You check it ? ). I have problems with dsmeditor so maybe it is why it did not add the files to .dsm file.
I will do needed fixes tomorrow and I hope this version will be correct at last and I will be able to create new thread
and because I found my USB cable I will flash it too. Who knows, maybe it will be my favourite rom not 6.5.
I liked ffboy's 6.1 maybe I will like it too.
drupad2drupad said:
What worries me is the absence of everyone in the forum. I am getting a feeling that this forum is dying slowly. Probably because it's 'upgrade' time for most users and everyone is moving to different handsets (hopefully not iPhones!) I have my upgrade due in few weeks too but I will be around in forums from time to time as I've literally loved TG01 since day 1!
Click to expand...
Click to collapse
Yes, it is what I said some day that without enthusiasm of drupad and Oly this forum would die. On the other hand, many people seem to have their tg01 from relatively short time. Unfortunately, many people have them bricked irreversibly.
BTH. Is the upper bar "original" ? I mean it is the same as in Toshiba WM 6.1 system ? Mangasora ported sys from xx56 to xx57 and as I remember my tests of His rom, I did not like it too much. Is it possible to change upper bar to the same I have in WM 6.5 ?
I would not like to install any "android like" and others.
And why You do not like iPhone ? I do not like too it because .... I do not like it . The same as HTC software...
Regards
fxdjacentyfxd
fxdjacentyfxd said:
Yes, I think it is my mistake. Intersting that what worked under 6.5 ( I mean copy to created directory ) does not work here but I fixed it. I hope
Exactly ! Two files ( maybe ) are missing. One fxdjWM61SPBIconsSettingsFix.exe in \windows directory and fxdjWM61SPBIconsSettingsFix.lnk in \windows\startup directory ( can You check it ? ). I have problems with dsmeditor so maybe it is why it did not add the files to .dsm file.
I will do needed fixes tomorrow and I hope this version will be correct at last and I will be able to create new thread
and because I found my USB cable I will flash it too. Who knows, maybe it will be my favourite rom not 6.5.
I liked ffboy's 6.1 maybe I will like it too.
Yes, it is what I said some day that without enthusiasm of drupad and Oly this forum would die. On the other hand, many people seem to have their tg01 from relatively short time. Unfortunately, many people have them bricked irreversibly.
Regards
fxdjacentyfxd
Click to expand...
Click to collapse
more people will still visit the forum. i have been here from the very start when the roms were first made. the forum use to be very big then! but it has shrunk considerably. if you take a quick look at the hd2 forum, see how big it is! there are always 1000+ people browsing the hd2 forums at a time! (view at xda index) many other forums have large support aswell! soon my tg01 can become my flashing phone when i get a new one, so i'll be able to beta test.. i was actually going to order my Desire S on sunday, but o2 changed the tariffs round...
but soon i can test for all cooks but as you know fxdj.. i am busy these few weeks

Categories

Resources