Related
after I flash with CWM, I get this when it trys to boot android "nand kernel open failed"
Also, in CWM, I get "E:Can't find misc"
installing nand without CWM works.
bump- I searched and didn't find anything helpful. I've tried 3 different roms
"Can't find misc" should only appear if you don't have a misc partition in NAND. (which is created when flashing CWM)
And nand kernel open failure probably means theres no zImage or initrd.gz in the boot partition.
Try flashing CWM from the CWM thread and then a ROM.
Gabe3 said:
after I flash with CWM, I get this when it trys to boot android "nand kernel open failed"
Also, in CWM, I get "E:Can't find misc"
installing nand without CWM works.
Click to expand...
Click to collapse
How did you transfer the zip file to SD? Did you use magldr? If so try re-transfering using your comp, as Magldr sometimes corrupts them.
Ricey
I have this same problem. I reflashed cwm and now i dont get the misc but no matter which rom i install from cwm i always get the kernel error =\
d34thd34l3r said:
I have this same problem. I reflashed cwm and now i dont get the misc but no matter which rom i install from cwm i always get the kernel error =\
Click to expand...
Click to collapse
just redo everything. that fixed it for me.
Bump.
Did a clean install of TyphooN CyanogenMod 7 Nightly v3.3.1 and got the "nand kernel open failed" error.
I formated the SD-Card two times, reinstall cwm 150mb partition 3 times and still get the same error, first time within almost 1 year of android on my HD2 ._.
Any ideas or solutions welcome.
and another bump and sorry for my bad english =)
i get the "nand kernel open failed" error too.
i installed radio and hspl 2.08
then flashed MAGLDR 1.13
continued with CWM (250mb)
then formated my sd-card und put TyphooN CyanogenMod 7 on it
after installation, i get the error.
redid all 2 times now, nothing works.
NEED HELP ^^
Likewise i am getting it with hyperdroid v12
I've just got it with HD2 NDT MIUI GINGER ROM V13.0 Multilang :/ I reinstalled magldr,clm and the rom and formated in clm but still get the error! :S
[★] said:
I've just got it with HD2 NDT MIUI GINGER ROM V13.0 Multilang :/ I reinstalled magldr,clm and the rom and formated in clm but still get the error! :S
Click to expand...
Click to collapse
i say you have to do a clean wipe starting fro scratch task 29 it ad redo
bckstn said:
and another bump and sorry for my bad english =)
i get the "nand kernel open failed" error too.
i installed radio and hspl 2.08
then flashed MAGLDR 1.13
continued with CWM (250mb)
then formated my sd-card und put TyphooN CyanogenMod 7 on it
after installation, i get the error.
redid all 2 times now, nothing works.
NEED HELP ^^
Click to expand...
Click to collapse
me too same massege
bckstn said:
and another bump and sorry for my bad english =)
i get the "nand kernel open failed" error too.
i installed radio and hspl 2.08
then flashed MAGLDR 1.13
continued with CWM (250mb)
then formated my sd-card und put TyphooN CyanogenMod 7 on it
after installation, i get the error.
redid all 2 times now, nothing works.
NEED HELP ^^
Click to expand...
Click to collapse
Typhoon doesn't use 250mb CWM, use the one provided with rom 150MB System/5MB Cache (ClockworkMod Recovery v3.0.2.5), most "nand kernel open failed" are down to wrong CWM size
I'm getting the same error, but only with sense 3.0 roms. Any other roms I've used have installed have worked. Is there a certain step I'm missing with installing sense 3.0 roms? I'm using MAGLDR v1.13 and Clockwork Recovery Mod v3.0.2.5. I flashed recovery_150m_cache_5m.zip onto the phone using magldr usb flasher. Any ideas?
cludseph said:
I'm getting the same error, but only with sense 3.0 roms. Any other roms I've used have installed have worked. Is there a certain step I'm missing with installing sense 3.0 roms? I'm using MAGLDR v1.13 and Clockwork Recovery Mod v3.0.2.5. I flashed recovery_150m_cache_5m.zip onto the phone using magldr usb flasher. Any ideas?
Click to expand...
Click to collapse
150mb for sense rom is definitely to low!
Read the rom's thread carefully guys!
It says there what CWR partition is needed.
Sense roms need SD CARD PARTITION so read the thread (it's first page).
If you have read it and your CWR partition looks exactly as it was given in the rom's thread then do task29, hspl, magldr 1.13 and CWR.
If it still doesn't work try different roms or try CLK.
Thanks for the response. How do I create a 5/240/5 partition through CWR? The last partition I made was just installed through .zip on CWR. Sorry for the questions, new to the hd2.
do all beginners understand this? you are probably putting the 'clk' version of the rom in your storage card for installation. you need the 'magdlr' version of the rom for clockwork mod to correctly install android
musashiz said:
do all beginners understand this? you are probably putting the 'clk' version of the rom in your storage card for installation. you need the 'magdlr' version of the rom for clockwork mod to correctly install android
Click to expand...
Click to collapse
Hi guys, i had the same problem, and i figured maybe i can show u what i did, to help u.
i went to THIS thread and followed the instructions:
"Installation Guide for MAGLDR 1.13"
the error occured right after i flashed the MAGLDR_CWM_Recovery_v3.2.0.0_for_NexusHD2_135M.zip onto my HTC HD2.
the only thing i had to do was enter magldr boot menu (hold off button while booting)
then i choose AD RECOVERY
CWM started up and i choose install zip from SD card
ofcourse i have placed NexusHD2-Gingerbread_V3.0_NAND_(Android-2.3.5).zip onto the ROOT of my SD card previously.
the .zip file installed perfectly and then i rebooted my phone.
all was ok after that..
hope this helps!
musashiz said:
do all beginners understand this? you are probably putting the 'clk' version of the rom in your storage card for installation. you need the 'magdlr' version of the rom for clockwork mod to correctly install android
Click to expand...
Click to collapse
Awww, that was my mistake. It's working with the MAGLDR version now. Thanks for pointing that out
musashiz said:
do all beginners understand this? you are probably putting the 'clk' version of the rom in your storage card for installation. you need the 'magdlr' version of the rom for clockwork mod to correctly install android
Click to expand...
Click to collapse
No we do not, thank you, this helped.
Hello,
I have installed Magldr 1.3 + NANRDOID MDJ 2.6 ..
I am unable to go to the boot from ad sd option ... As in if i have to update any .zip file .. and I choose the option for ad sd boot .. it will get stuck in GO GO GO screen ..
Please help me ..
I have used task 29 and installed everything again ..
NOTE : I have installed a new sd card and updated the recover_250 file also.
Thanks ...
Have you installed a CWM 1.3 partition? You need to flash a partition from here to provide you with CWM Recovery. I know you say you have a recover_250 file, but is it the latest version?
To go to CWM you need to select the AD Recovery option not Boot AD SD.
ClydeB1 said:
Have you installed a CWM 1.3 partition? You need to flash a partition from here to provide you with CWM Recovery. I know you say you have a recover_250 file, but is it the latest version?
To go to CWM you need to select the AD Recovery option not Boot AD SD.
Click to expand...
Click to collapse
Thank you for the reply.
Yes i have installed the latest version1.3 only and I am talking about going into the option for BOOT AD SD .... I want to install another ROM ...
and when i click the BOOT AD SD option .. it will get stuck in the GO GO GO screen ...
I hope i am able to explain my situation ...
When i go to BOOT AD SD option in MAGLDR V1.13 .. it says ..
SD KERNEL OPEN FAILED
Its working now
Thank you
ajsam4u said:
Its working now
Thank you
Click to expand...
Click to collapse
how did you solve this problem because am having the same problems, pls help me out.
mikeysho said:
how did you solve this problem because am having the same problems, pls help me out.
Click to expand...
Click to collapse
If you are using magldr 1.13 with cwm 1.3 partitions you no longer go to Boot AD SD. To enter CWM you need to go to AD Recovery on magldr menu.
I had the same problem.
but now i have another problem which recovery should i take? 150 250 400???
greetz
nummrt47 said:
I had the same problem.
but now i have another problem which recovery should i take? 150 250 400???
greetz
Click to expand...
Click to collapse
This depends on what ROM you want to install using CWM. A large ROM like a Desire HD build requires more then a light ROM with only the essentials baked in. If you really aren't sure what to flash just check the guide accompanied with the ROM.
does this mean that I have to install CWM every time i want to install another ROM??
nummrt47 said:
does this mean that I have to install CWM every time i want to install another ROM??
Click to expand...
Click to collapse
Technically, no. Not unless the partition layouts for the different ROM's you are trying are different and in turn they require you to run DAF (which re-partitions your NAND storage).
If they are the same then your partition layout won't be changed and your recovery partition, which is where CWM resides, won't be affected at all when switching ROM's.
but i could also install the biggest one(400) and everything would work because I can't have a too small partition???
could that work??
I have a european HTC HD2 running MAGLDR 1.3 and I cannot install Clockworkmod under any circumstances. I've been running MDJ's Cyanogenmod 7 for weeks now and have the correct radio and hspl, but every time I attempt to flash clockwork I get a message saying NAND kernel open failed when I try to boot AD Recovery. I've tried both the NAND boot and the old style SD boot with no luck whatsoever. I'm now totally stumped and unable to get any of the new ROMS. Thanks in advance for any help you can give.
Can you give us the exact steps you have taken?
This way we can see if you missed something.
Thanks for the response,
Installed radio and hspl, then magldr 1.11 (this is the setup I'd been using for a while). Today I tried to install clockworkmod so I upgraded to magldr 1.13 at the tri color screen. That seemed to work fine, all the functions working perfectly. I then downloaded cwm 1.3 150mb and tried to install (USB flash, ran as admin etc.) The install seemed to go alright but when I tried to boot into recovery I got the error message. I ran into the same problem using the method where you put files on the SD first and using the script to install magldr 1.13 and cwm one after the other.
i had problems with cwm 150 installer. i ended up getting the 250 meg version, and editinf flash.cfg, worked first time.
Did you use AD SD or AD Recovery (option 8 )?
AD Recovery is the one to use.
t3h_cookie_monster said:
Thanks for the response,
Installed radio and hspl, then magldr 1.11 (this is the setup I'd been using for a while). Today I tried to install clockworkmod so I upgraded to magldr 1.13 at the tri color screen. That seemed to work fine, all the functions working perfectly. I then downloaded cwm 1.3 150mb and tried to install (USB flash, ran as admin etc.) The install seemed to go alright but when I tried to boot into recovery I got the error message. I ran into the same problem using the method where you put files on the SD first and using the script to install magldr 1.13 and cwm one after the other.
Click to expand...
Click to collapse
I've used both and neither worked, they both result in nand kernel open failed. Its unable to find initrd or the other file no matter what i do.
Sounds like the file recovery.raw (or is it recovery.img, i forget) didn't get flashed, please confirm there is a recovery image included with the cwm files you are installing, and also please paste us the contents of your flash.cfg. file.
Try flashing 400mb clockwork mod.most roms require this mod and it does work
Sent from my HTC HD2 Gingerbread using XDA App
I got it to work by using the 250mb version with edited flash file! Thanks a lot for all the help.
arzin said:
Try flashing 400mb clockwork mod.most roms require this mod and it does work
Sent from my HTC HD2 Gingerbread using XDA App
Click to expand...
Click to collapse
hello, Im currently having the same problem...how did you edit the flash size?
Oaraujo said:
hello, Im currently having the same problem...how did you edit the flash size?
Click to expand...
Click to collapse
open the file flash.cfg in notepad on the pc, edit the number in the system line (you will see what i mean when you see it) change it, save it, flash it.
nand kernel open failed
you are probably putting the 'clk' version of the rom in your storage card for installation. you need the 'magdlr' version of the rom for clockwork mod to correctly install android
Same problem with NAND karnel fails
I bought my HTC HD from my friend at work, it had installed, android aMAGLDR V1.13 I had a problem to erase my friends gmail account from the phone and when ever i connect to the Internet his account appears to log on and sync, I tried to reset the phone but I failed, now I tried ti flash the android regarding gunjahman's Flashing a new nand android rom over a previous one http://forum.xda-developers.com/showthread.php?p=11302885#post11302885
and I flashed with Recovery_400M and now I'm in Boot menu and can't get it to boot or anything else.
Can please anyone help me???
can anyone help me installing this, i have installed other rom before but i don't understand how to do whit this one.
i got MAGLDR on my phone and then i gonna download this verison http://www.multiupload.com/11VO5R7EM4
Right?
and load in to usb loader in MAGLDR and then what, how do i use the files in the zip i have download? use costumruu ? or how
You have to flash clockworkmod (short CWM).
With cwm you can flash zips to your nand and also make backups:
http://forum.xda-developers.com/showthread.php?t=987531
Code:
For MAGLDR 1.13, booting from NAND:
Download the file attached and named "magldr_recovery_3.0.2.5.zip"
Download a partition layout incl. recovery from [URL="http://forum.xda-developers.com/showthread.php?t=898913"]this thread[/URL] which fits your ROM you want to use best and unzip it into "C:\recovery" for example
Copy over "magldr_recovery.img" from inside the zip archive into this folder "C:\recovery", delete existing "recovery-raw.img" and rename "magldr_recovery_3.0.2.5.img" to "recovery-raw.img"
Flash the recovery and partition layout using "DAF.exe" as usual and described in the thread of raiderx or the ROM provider
Boot Recovery with menu point "8. AD Recovery"
You're done
Click to expand...
Click to collapse
fischerben said:
can anyone help me installing this, i have installed other rom before but i don't understand how to do whit this one.
i got MAGLDR on my phone and then i gonna download this verison http://www.multiupload.com/11VO5R7EM4
Right?
and load in to usb loader in MAGLDR and then what, how do i use the files in the zip i have download? use costumruu ? or how
Click to expand...
Click to collapse
I take it u want to install TyphooN_CM7_v3.1.3 rom?...Then simply visit the ROM's thread for clear instructions on how to successfully flash it...Its quite straight-forward.
Clean Install MAGLDR:
1. Task 29 (Just for measure)
2. Flash Radio(2.15 Recommended if u haven't alrd done so)
3. MAGLDR 1.13
4. MAGLDR 130MB System/4MB Cache (ClockworkMod Recovery v3.0.2.4)
5. Install TyphooN CyanogenMod 7 .zip with CWM (boot in2 MAGLDR, select AD Recovery > Select Zip to install from SD card, Flash.)
i succeed install the rom. but now i am stuck on the Typhoon loading screen
fischerben said:
i succeed install the rom. but now i am stuck on the Typhoon loading screen
Click to expand...
Click to collapse
has it something to do with my kernel?
fischerben said:
has it something to do with my kernel?
Click to expand...
Click to collapse
You might have done something wrong along the way...Wat steps did take to flash the ROM? ...d kernel included in the ROM usually doesn't give problems as its been tested before release...did u flash another?
Yes i flashed hyperdroid and it worked, so i don't understand why it's getting stuck on boot with typhoon
Try the steps mentioned above by " voncrane " , make sure u do a task29 before everything and when u enter the recovery wipe full data / it should work if u follow the steps .
help
i cant find where the link to download typoon mod 7
So I decided to flash Clockwork Mod Recovery I had version 3.0.1.9 and I wanted 3
.0.2.5 I went into ROM Manager and flashed to that version. But now when I go into AD Recovery it says ERROR: Invalid boot image header and goes back to MAGLDR. Can someone help me fix this and get the most recent version of Clockwork Mod on my HD2. Thanks! Kind of a newbie sorry!
error
i have had the same problem what is did went here and re download the ROM manager 3.025 or what you were using before the error once you do that is i should work again but you mite have to install your ROM again i had to but when you download and flash it with the daf file just make sure you find the one that was working before you flash it you don't what to get the same thing again hope that help if not let me know good luck
starblade18 said:
So I decided to flash Clockwork Mod Recovery I had version 3.0.1.9 and I wanted 3
.0.2.5 I went into ROM Manager and flashed to that version. But now when I go into AD Recovery it says ERROR: Invalid boot image header and goes back to MAGLDR. Can someone help me fix this and get the most recent version of Clockwork Mod on my HD2. Thanks! Kind of a newbie sorry!
Click to expand...
Click to collapse
rko2010 said:
i have had the same problem what is did went here and re download the ROM manager 3.025 or what you were using before the error once you do that is i should work again but you mite have to install your ROM again i had to but when you download and flash it with the daf file just make sure you find the one that was working before you flash it you don't what to get the same thing again hope that help if not let me know good luck
Click to expand...
Click to collapse
Hi,
ROM Manager ONLY works with cLK,NOT magldr.
Use THIS TOOL (Don't forget to thank him)
to re-install magldr
Magdlr is still installed, just Option 8 does not work. Will this reinstall MAGDLR and Clockwork Mod?
starblade18 said:
Magdlr is still installed, just Option 8 does not work. Will this reinstall MAGDLR and Clockwork Mod?
Click to expand...
Click to collapse
Hi,
To install CWM,use the installer...
Top line,magldr update recovery,choose the size of the partition you want for your new ROM and click update in bottom left hand corner.
It didn't work. Said no space left on the device
starblade18 said:
It didn't work. Said no space left on the device
Click to expand...
Click to collapse
Hi,
No memory left means the last version of recovery you installed was smaller than the current one. You need to completely repartition MAGLDR in order to install new version in that case.
Is there an average partition size and cache size? I need to choose?
starblade18 said:
Is there an average partition size and cache size? I need to choose?
Click to expand...
Click to collapse
Hi,
I think you should start the process again from the beginning.
Task 29
Install magldr
Install CWM by using the partition you want for your new ROM.So look at the [OP] of your new ROM, get the CWM partition and flash that.
Then you can go straight to installing the ROM.