Hi everyone!
My friend has got the HD Mini and put Android on it. After AD crashed some programs didn't work after restart and so he wanted to install a new ROM on it. Everything worked fine until the installion got 100% suddenly the screen got black and showed this message:
Software update failed.
Please try again.
He tried again but nothing worked. No reset, nothing....
Can anybody help ??
Try to put a original Rom, first take out the battery, put the battery again, tham old the volume down, push the power buton, the screen will be in three colors, connect the usb cable, and flash the original Rom.
You need to download the original Rom, from the Htc site, with the Hd Mini serial number.
malima17 said:
Try to put a original Rom, first take out the battery, put the battery again, tham old the volume down, push the power buton, the screen will be in three colors, connect the usb cable, and flash the original Rom.
You need to download the original Rom, from the Htc site, with the Hd Mini serial number.
Click to expand...
Click to collapse
Okay I did as you said, but we only got Error [276].....
And the tricolored screen doesn't look normal
but thx
it's the update error.just make a soft reset and launch the Ruu again.
ps:do you flash you device with the original rom?
Is very important you flash the original Rom, see in this post how to discovery the region of your Rom http://forum.xda-developers.com/showthread.php?t=799923&highlight=Malima17
We used the original ROM but always the software update error appeared.
My friend can be lucky that he's got guaranty so he sends it to htc...
But thanks!!!
look at my thread : http://forum.xda-developers.com/showthread.php?t=1041988 - with a (HD MINI) in your same situation I have repaired everything with my procedure. perfect. be quiet.
Procedure with the stock rom with activesync, having your screen, absolutely does not work, 'cause in your situation is corrupt to boot. With SDCARD method avoids the problem and create the boot from sdcard-
Related
hello guys, i'm really desperate now. my Magician is dead. i followed the laid out procedure 100% for upgrading to bigstorage. that's what i did:
- dump rom on to the sd card (512MB).
- got a external card reader (since the one in my laptop did not work with ntrw.exe)
- killed ActiveSync (wcesmgr)
- dumped the rom to my hard disk
- got Big_ROM_Ger_1.11.nb1 from ftp
- changed the first 416 bytes with ultraedit.
- wrote the resulting rom to the sd card with ntrw.exe.
- flashed (got the question in bootloader mode, pressed power).
- flash completed, got the 100% message and checksum failure.
- did a softreset
- my Magician is now DEAD !!!
Tried to put it in bootloader mode again, nothing! Put out the battery, unplugged and replugged usb cable, nothing!
PLEASE, any suggestions or help ??????
Please explain "nothing." Are you getting anything on the screen, blank screen, backlit, logo, text, anything?
Can you zip and upload your modified ROM dump file to dropload, rapidshare, or some other portal where someone can take a look?
Did you pull the battery completely, reinsert it, and pressed the reset+camera+power to get back into the bootloader?
BeyondtheTech said:
Please explain "nothing." Are you getting anything on the screen, blank screen, backlit, logo, text, anything?
Can you zip and upload your modified ROM dump file to dropload, rapidshare, or some other portal where someone can take a look?
Did you pull the battery completely, reinsert it, and pressed the reset+camera+power to get back into the bootloader?
Click to expand...
Click to collapse
the screen is absolutely blank. if i plug in the power cord not even the charging lamp is on.
i removed the battery completely for a few hours now, reinserted it just that moment and pressed reset + camera + power --> blank screen, no backlit, no logo, no text. i even used my torch to make sure i didn't miss the bootloader message. nothing.
when i press the reset + camera + power button the blue led blinks for a split second but then again nothing.
tried it with and without external power....
any clue????
rom i used
BeyondtheTech said:
Please explain "nothing." Are you getting anything on the screen, blank screen, backlit, logo, text, anything?
Can you zip and upload your modified ROM dump file to dropload, rapidshare, or some other portal where someone can take a look?
Did you pull the battery completely, reinsert it, and pressed the reset+camera+power to get back into the bootloader?
Click to expand...
Click to collapse
you can finded the zipped rom i flashed here:
http://62.218.22.81/MagicianRom/[/url]
Sounds like you have screwed it completely. Back to the shop...
saldous said:
Sounds like you have screwed it completely. Back to the shop...
Click to expand...
Click to collapse
well, could be possible.... kinda teaches me not to mess around too much. i flashed my old xda II with magneto and all, never had any problems....
anyway, i will try to clear the backup battery over night and try it again tomorrow. if it still doesn't work, i'll get it back to the shop. it's brand new (2 weeks), so i guess (hope) it shouldn't be a problem.
No solution - but I had the same problem
Hello,
sounds that you have exactly the same problem I had. I also wanted to use bigstorage. First I updated to 1.06 official rom from T-mobile Germany. Then I used mksbigstorage to modify this rom. After installing this my mda was stuck at the splashscreen. But the bootloader still worked so I was able to restore my original rom.
Next I downloaded the 1.11 extended german rom from xda-developers ftp-server. I also replaced the first 416 bytes with the one from my rom. After installing this rom and doing a softreset my device was completely dead. No bootloader, no even a blinking light when connecting it with the power supply. I also tried to remove the battery for some time. But nothing worked. As I also had this device for just some days I finally did send it back and recieved a new one.
On this new one I also tried to modify rom 1.06 with mksbigstorage. But after that it was again stuck at the splash-screen. Mksbigstore seems not to work on this rom. Finally I was able to use bigstore by modifying two adresses in the original 1.06 rom downloaded from my device. This method is described in this forum. Worked without problems.
So I do not know what went wrong and I am sure I followed the instructions for flashing bigrom exactly, but as I am not the only one with this problem there is a risk flashing under certain circumstances.
7bft said:
saldous said:
Sounds like you have screwed it completely. Back to the shop...
Click to expand...
Click to collapse
well, could be possible.... kinda teaches me not to mess around too much. i flashed my old xda II with magneto and all, never had any problems....
anyway, i will try to clear the backup battery over night and try it again tomorrow. if it still doesn't work, i'll get it back to the shop. it's brand new (2 weeks), so i guess (hope) it shouldn't be a problem.
Click to expand...
Click to collapse
I had the same problem flashed XDA 1 hundreds of times without problem. Flashed Magician device one time --> same problem as you have.
I've sent my device to repair center and they installed a new motherboard. So i don't believe that tehre is any fix to relive you're device..... :-(
Stefan
I don't see anything wrong with the ROM file except for the fact that it's slightly larger than my ROM (65281k vs. 65427k). May have been a bad write to the SD card. Was your card a 64MB SD card?
BeyondtheTech said:
I don't see anything wrong with the ROM file except for the fact that it's slightly larger than my ROM (65281k vs. 65427k). May have been a bad write to the SD card. Was your card a 64MB SD card?
Click to expand...
Click to collapse
My card was a 512 MB SD Card, since it is the only one I have.
On Monday I'll send it to the service center
Re: No solution - but I had the same problem
beta2morita said:
Hello,
.... I also tried to remove the battery for some time. But nothing worked. As I also had this device for just some days I finally did send it back and recieved a new one.
On this new one I also tried to modify rom 1.06 with mksbigstorage. But after that it was again stuck at the splash-screen. Mksbigstore seems not to work on this rom. Finally I was able to use bigstore by modifying two adresses in the original 1.06 rom downloaded from my device. This method is described in this forum. Worked without problems.
...
Click to expand...
Click to collapse
Thanks for your response, kinda reduces my pain and asures me that I'm not a complete idiot....
I'm now pretty sure that I have the same problem as you have and that sending it to the service center is my only option....
At least I can use my Himalya with Magneto a few more days :wink:
I guess I will not try this again since I don't want to risk killing it again, allthough I allready had problems with the storage size on the working device (tomtom).
One more question: Did anybody ever had problems on upgrading from a t-mobile rom to a vodafone rom? is it even worth upgrading to 1.12?
Thanks for your help guys!!!
alright.. i made a similar post to this before and i came across the wiki...
well i can't view what my SPL or my IPL because as soon as i turn the device on, all that shows is the boot loader screen and displays serial on the top with 0.16-0.90 in red characters on the bottom (I'm not sure what those are)...
here are the only details that i know about my phone:
I DON'T have hard SPL
My Original ROM i was using before was an htc windows mobile 5 rom
The reason that my phone is bricked right now is because the usb cable disconnected in the middle of the flash
I'm using Windows Vista for flashing
Computer won't recognize the phone when on usb
My phone (qtek 9600) can't load the operating system
*EDIT*
THE PHONE IS STUCK ON BOOTLOADER WHEN I TURN IT ON, NOTHING ELSE, BUT THE BOOTLOADER SCRREN DOESN'T SHOW MY SPL AT ALL.
ALSO, MY COMPUTER DOESN'T RECOGNIZE THE PHONE....... MY PHONE HAS A TYPE 2A BRICK
Helping me will be greatly appreciated
come on.. I'm without a phone
Do you have a 2GB or smaller SD card? Copy a rom image to it and rename it HERMIMG.NBH
Turn it on and you might get lucky!
Just make sure its stock rom that was supplied, or the updated WM06 version as the CID should check out then...
vwkess forgot to mention, reset into bootloader, hold power, ok button and reset with stylus. Hold all buttons in until you get to the tri-colour screen. If it works, follow the prompts....
Cheers...
hi,
i think i can hlep.
i had recently bricked my phone with a custom wm6 image, it worked fine for two days and then i reboot, and all i see was the welcome image, nothing else.
so what i did is -
i pressed the hard reset buttons - power + OK + SOFT RESET (Stylus), kept it pressed for 3-4 seconds, the fone rebooted, the screen was full with some colored bricks i connected my fone in USB and on screen i saw USB.
I then again flashed my fone with the working update, it worked perfectly for me, try may be you can get some luck
ps - before doing all these, i turned my fone off by removing the battery, i removed sim card and mmc card as well.
regards
That may work too, but again, try to flash with a stock rom, untick "connect with USB" in activesync and then try.
Make sure you go to boootloader screen, instruction in rajivlodha's post, before you connect to the pc.
Goodluck...
I need some help as well.
I think I may have bricked my phone. It's a rooted htc hero cdma. I'm running cyogenmod on it and it was working fine, until using metamorph to apply some changes to the theme.
I went to reboot, and it now it won't load past the htc screen. Even when i try the key combination to put it into recover mode. I didn't install a nandroid backup, and i'd be fine with just completely wiping my phone. help is appreciated.
Hi,
if i connect my HTC Touch HD with my computer, it's just charging, nothing more. If i go to Bootloader, there is just written Serial even if its connected.
I am using Dutty ROM since some weeks and didn't had any problems till a few days ago, the strange thing is, that i didn't change anything.
I tried it on my laptop and on my computer the one with windows vista the other one with win xp, it worked on both, but not anymoe.
i also have a problem with the camera, if i press it nothing happens it just stays in the menu. Some days ago i got a error failed to initialize camera, but no more error anymore.
In my opinion my hardware is broken somehow, i hope someone in here can tell me sth different and a solution.
And if my hardware is broken, how can flash my original rom back without an usb connection, because the warenty will be gone with a custom rom i think.
I hope someone can help me.
Kryston said:
Hi,
if i connect my HTC Touch HD with my computer, it's just charging, nothing more. If i go to Bootloader, there is just written Serial even if its connected.
I am using Dutty ROM since some weeks and didn't had any problems till a few days ago, the strange thing is, that i didn't change anything.
I tried it on my laptop and on my computer the one with windows vista the other one with win xp, it worked on both, but not anymoe.
i also have a problem with the camera, if i press it nothing happens it just stays in the menu. Some days ago i got a error failed to initialize camera, but no more error anymore.
In my opinion my hardware is broken somehow, i hope someone in here can tell me sth different and a solution.
And if my hardware is broken, how can flash my original rom back without an usb connection, because the warenty will be gone with a custom rom i think.
I hope someone can help me.
Click to expand...
Click to collapse
A hard reset will quickly tell you if it's hardware or software and you don't need usb for that. There is also an option which dictates what the phone does when connected via usb, so you might want to check that option first.
need to read & search a little more
last paragraph of this post outlines how to return to stock rom
http://forum.xda-developers.com/showpost.php?p=2710548&postcount=1
i did hardreset, but still same problem
what i also noticed, is that sometimes my display don't work, i have sound and vibrate feedback, but i see just a black display, softreset etc doesen't work somehow i have to take of the battery.
i noticed also that the usb cable is a bit broken, but it still charges the phone.
but i already saw that normal usb cable should work too, so i tried it but no change.
i guess i will try to get the stock rom again now and see what happens
well like i thought, i can't get the stock rom, because i dont have a usb connection
any more suggestions?
Kryston said:
well like i thought, i can't get the stock rom, because i dont have a usb connection
any more suggestions?
Click to expand...
Click to collapse
There is 2 methods to flashing roms. Have you tried SD card method?
1. Download ROM image you would like to use, normally named RUU_Signed.nbh, and rename it to "BLACIMG.nbh"
2. Copy BLACIMG.NBH into the root dir of your Storage Card.
3. Be sure to have at least 30% of charge.
4. Turn off your device by using the Power Button
5. Go to bootloader mode. Push and hold Vol Down + press Power button.
6. As soon as presented the message, push Power button to start flashing or Volume Down button to cancel.
7. The whole procedure will take about 3 minutes. After you finish and see the relative message, soft reset your device, you are ready.
thanks god i didn't bring the phone to shop yet xD
thank u, i will check this method i will post here if it works later
well now i have another problem
there is written upgrade rom code error please try again on bootloader, i cant turn it on anymore it gets stuck on the loading screen of the flashing progress
Kryston said:
well now i have another problem
there is written upgrade rom code error please try again on bootloader, i cant turn it on anymore it gets stuck on the loading screen of the flashing progress
Click to expand...
Click to collapse
I had this exact same problem a while back after a bad flash. What you need to do is flash carriers orginal stock rom onto device. This will be the only rom which will work. Go to wiki section on stock roms here and download your original rom and flash it. Don't worry if bottom of bootloader is blank or doesn't say 'usb', original rom will flash anyhow.
More info read this thread
i am downloading right now, hopefully it will work, i will write more infos later
thank u for your help, without you, i would be lost...
i am stuck, i get error 206 connection
i downloaded stock rom to my pc
and i'm a bit confused, my pc noticed that i pluged in the phone, my device manager showed my phone, this worked only one time, now nothing...
EDIT: in bootloader mode, serial staus doesnt switch to usb or blank, updateing usb driver doesn't work without usb connection to device, at least i didnt found sth here
i will try it on my other computer now, but i doubt it will work
EDIT2: got usb connection for some seconds, problem is my hardware of device its broken somehow, if i press on th eback of the device i am able to get usb connection, now it failed, i will give it some more tries, there was sth 294 ID error
EDIT3: seems like its the wrong rom, how can i find out which rom will work?
EDIT4: semms like i got a working rom its at 10%
EDIT5: Device working again, usb working perfectly again, dunno why, but camera still doesnt work, there happens nothing if i press on it and display turns black sometimes as before.
i flashed an O2 Rom now, from my provider.
My last question now is, what about warranty, how can i know that uspl/hsapl is fully removed from device and how to find out if device is now a case of warrnty, where can i check it? because i want a working camera again, so i think i need the warranty
Some infos:
O2 Provider ROM flashed
On Bootloader i see:
BLAC100 32M
SPL-1.54.0000
MicroP-Blackstone (LED) v6
In my opinion its fine for warranty, but i want someone to confirm this.
And thank you alot for ur help and work in this forum =)
If you have an official HTC upgrade rom on your device you are fine for warranty. As your SPL says 1.54.0000 this means you haven't got USPL or HSPL on your device, so you're fine.
thank you very much
Hi all,
a few days ago I installed IlSalgo 6.5 rom because sometimes i've found my polaris with 3lit3 rom powered off.
This morning after I powered on my polaris it stopped at the first screen (on energy star) and then it shutdown.
I tried with an hard reset while it starts, but nothing changes...
Could you help me?
Thanks in advance,
Reveng3
P.S. sorry for my english
try to put into bootloader; hold camera and press the reset hole.
Then when in this flash your stock rom that was shipped with it or the 6.1 upgrade that was released. See if that brings it back to life!
Let us know what happens after that and go from there.
I tried putting it into bootloader... it shows the colors screen and then shutdown....
But now it works....(finally it stopped on colors screen without power off)
maybe after i removed the microSd (i tried with and without microSd, with and without sim, soft reset, hard reset, bootloader)
this evening i'll try using again my microSd card...
thanks
I have another problem...
i'm trying to change rom.... (pcarvalho eXtreme) because after I restored the rom.... it stopped working again...
in the pcarvalho rom page there is "flash this rom 1st if you have any stability issues" (the original htc rom)
ok, i'm flashing my htc....
i'm on 31% and the update is blocked.....
is there a way to avoid problems? now I think the only thing i can do, is to remove the usb cable or kill the update process....
please help me...
thanks...
Edit: i'm trying with recovery (rom updater utility, after connection blocked, says me to recover.....).... brrr....
Edit2: blocked again on 31%...... please tell me something....
Edit3: All it's ok! After recover, before starting again flashing I used another Rom (my first used.... 3LIT3)... Now it works fine!
Reveng3 said:
I have another problem...
i'm trying to change rom.... (pcarvalho eXtreme) because after I restored the rom.... it stopped working again...
in the pcarvalho rom page there is "flash this rom 1st if you have any stability issues" (the original htc rom)
ok, i'm flashing my htc....
i'm on 31% and the update is blocked.....
is there a way to avoid problems? now I think the only thing i can do, is to remove the usb cable or kill the update process....
please help me...
thanks...
Edit: i'm trying with recovery (rom updater utility, after connection blocked, says me to recover.....).... brrr....
Edit2: blocked again on 31%...... please tell me something....
Edit3: All it's ok! After recover, before starting again flashing I used another Rom (my first used.... 3LIT3)... Now it works fine!
Click to expand...
Click to collapse
check radio version always
Hello fellow HD2 users,
I've got an HD2 T-Mobile UK. I've just tried my luck with HSPL, I've succeessfully installed HSPL using the steps in this thread: http://forum.xda-developers.com/showthread.php?t=609477
However, when I copied the LEOIMG.nbh (1.48 offiicial rom) file to the micro SD 8GB card; and rebooted, things seemed ok untill it suddenly stopped the progress of flashing the ROM and gave me a Grey screen with the Error 00028002 "not Allow" sort of thing.
So I tried yanking battery out, rebooting normally, it displays a grey triangle with " ! " in the middle and then displays the 00028002 error then back to Tri colour bootloader, I noticed that the HSPL is gone and its back now to 1.42.0000
I even tried a Factory reset, it does the reset I reboot, but it still shows me grey triangle and same routine. I've tried everything now. This bloody T-mobile phone is just useless to me at the moment !
Can you please HELP !!! Thank you so much !
Regards !!
Ok found solution, I just had to install the official T-mobile 1.43.110.0 ROM from this link:
http://rapidshare.com/users/258XUJ
After just switching on the phone with microsd inside, I just plugged the usb and started the RUU and followed the steps and things are back to square one now.
not thrilled that it has been a nightmare so far to get a new rom on.
but at least I can use my phone with its basic functionalities. not gona push my luck again...
You cannot flash official ROMS from the sd because it replaces the SPL with a stock one. Presume it got half way through then decided the ROM was not for your device since it hasd replaced the SPL. Cooked ROMS are ok to flash from SD but for Stock use the RUU.
tell me it's working please.my HD2 from UK T-Mob is same "bricked" and in Slovakia is very very difficult to find somebody who can fix this....i think maybe only the HTC repair center
^
If your phone can load up into the boot loader (tri-color screen) your phone is not bricked.
Deeper Trouble:Same error,but cannot use USB!!!
Guys,
im in even much deeper **** now.I accidentally tried flashing a stock ROM via SD card and now ive gt the same ROM code error.What makes this worse is that my Vista computer is not recognizing any USB connection when i connect my HD2 to the computer.If i need to flash a stock rom via RUU wrapper to get through this stupid ROM code error, i need a USB connection at the first place...which IS NOT WORKING NOW!!!...im sitting duck here guys...i really really need your help on this one.im extremely frustrated and helpless.thanks alot...
When u say USB not working, how do you know?
Put phone in bootloader, connect USB cable,,, on phone does "serial" become "USB"? If yes then just run the flash.
samsamuel said:
When u say USB not working, how do you know?
Put phone in bootloader, connect USB cable,,, on phone does "serial" become "USB"? If yes then just run the flash.
Click to expand...
Click to collapse
Go to this thread Sam as kawshigan started a new thread
semo2010 said:
Ok found solution, I just had to install the official T-mobile 1.43.110.0 ROM from this link:
http://rapidshare.com/users/258XUJ
After just switching on the phone with microsd inside, I just plugged the usb and started the RUU and followed the steps and things are back to square one now.
not thrilled that it has been a nightmare so far to get a new rom on.
but at least I can use my phone with its basic functionalities. not gona push my luck again...
Click to expand...
Click to collapse
broken link