Database Users

Im so scared...!!

I just bought a t-mobile wallaby from here in india, And i decided there was a update available after 3.14 or something. so i ran it. But it stopped in the middle. Said 20 min but waited an hour. Then i took the xda of its cradle and did a hard reset... Now all it does is switches on and show t-mobile and the light stay on...nothing after that. I think i really messed it up. Gave it to a guy who said he could fix it but now 4 days later says he cant. Really need help on how to do it myself Please. Please help me, cant throw money away like that......can some show me step by step instructions as i am stupid with upgraded or reinstalling this device.

why have you decided that you could upgrade your device if you don't understand anything to upgrading and its consequences.
Upgrading is *dangerous* for dummies.
You are the weak link[/list]

mananmistry said:
I just bought a t-mobile wallaby from here in india, And i decided there was a update available after 3.14 or something. so i ran it. But it stopped in the middle. Said 20 min but waited an hour. Then i took the xda of its cradle and did a hard reset... Now all it does is switches on and show t-mobile and the light stay on...nothing after that. I think i really messed it up. Gave it to a guy who said he could fix it but now 4 days later says he cant. Really need help on how to do it myself Please. Please help me, cant throw money away like that......can some show me step by step instructions as i am stupid with upgraded or reinstalling this device.
Click to expand...
Click to collapse
:x Forget what this guest just said we are a community who help each other out :x
I am now using the XDAII but when i had the XDA1 i had a similar problem. Got stuck upgrading. Hang onto your horses dude your device isn't dead so breath a sigh of relief. If you have a SD/MMC Card reader then use it to burn the base Rom from
http://lumpistefan.dyndns.org and then install it through the boot loader(Hold the Power button and then press the soft reset button using the stylus(you will enter the boot loader mode and then follow the instructions on how to install the Rom.
------------------------------OR--------------------------------------------
Go to a shop or a friend who had similar device, make sure you have a SD/MMC card with you and then enter the bootloader mode as described above and then copy the ROM on the SD Card. Then insert the card in your device and again enter the Boot Loader mode and Copy the Rom from the SD Card to your device after you are done press the Hard reset button on your device to switch it off keep it off for atleast 60 sec before pressing the hard reset button again to switch it on. Your device will live again.
[/b]A WORD OF ADVICE
Don't touch the Radio Stack on either your device or the other one. Always select Rom only.
If you need further help with using the bootloader search these forums you'll come up with alot of info.
Let me know how it works out

one question
Thanks for the advice.....your must be the better part of the site.
what happens if i cannot get into the boot loader.
thanks again

Re: one question
mananmistry said:
Thanks for the advice.....your must be the better part of the site.
what happens if i cannot get into the boot loader.
thanks again
Click to expand...
Click to collapse
I believe there's a way to go-back! Do a flush by pressing on the power button+the hard reset+the navigation button pressed. All at once and that's how you go-back to the original ROM. Let me know if it works and if you dare to do it anyways.. 8)

guest said:
why have you decided that you could upgrade your device if you don't understand anything to upgrading and its consequences.
Upgrading is *dangerous* for dummies.
You are the weak link[/list]
Click to expand...
Click to collapse
Mr. Guest you are an idiot, many of us have been at this point one time our another. This is no way to respond to a forum member in need of help.

i'm no techie when it comes to these things but just out of curiousity WHAT causes the upgrade to stop? mananmistry said he was in the middle of upgrading already; is it the rom he used or is it the connection (power flux, cable, sync, etc)? just curious... :wink:
oh and its beers for the others and the loo for the guest

update
now the thing is i got the phone back. I have connected the usb but pc cannot find device and xdatools or the rom .exe files wont install. it says "xda not found via activesync", something like that. I went into the boot loader and it said GSM ERROR and stops. have to press calender key to get into sub-menus. what is the problem. does the rom kitchen .exe files need sactive sync to be present. please can some one tell me.
do i need a sd card reader. can i not just use someone phone to put my sd card and burn onto sd...??

You are now in serious trouble, the GSM error often proves fatal for the phone. You can still flash the rom though by following the previous instructions. After that is completed you will have to try flashing a radio stack. Please be prepared to be disappointed, I wish you the best of luck. The good news is that even if the phone doesnt work you should still have a working pda.

Where can i get a radio stack rom...???
Click to expand...
Click to collapse

where can i get a radio stack rom....will try...
If my gf has a pda with sd card can i use the unit to see the sd card and write the rom on it???

Re: update
mananmistry said:
now the thing is i got the phone back.
Click to expand...
Click to collapse
how did U get the phone back 2 work (bootloader)
thanks
:?:

get a radio stack from here
http://lumpistefan.dyndns.org/tools/

Qtek9000 Won't soft or hard reset beyond boot screen!!

I've had my Qtek 9000 for a week. I've spent most of that week installing software, and getting it setup (using a lot of useful info from this site).
This afternoon it locked up, and wouldn't respond to any button presses (including the on/off button)
Soft resets result in it powering backon, but stopping at the boot screen, after displaying the ROM versions in red text.
Eventually, I tried a hard-reset. Same thing happens - process goes ok until it displays the ROM version, when it just sits there. I've tried removing the SD card and SIM card and hard-resetting. No Joy.
I had just installed OzVGA, and was testing it when this occurred, but that is probably just a coincidence (surely a hardreset should fix anything bad that happened there?)
I hadn't at any point played with the ROM.
What should I try next?
And, does anyone know if I'm going to be able to get support for this in the US from Qtek? (I bought it in the UK), new
Thanks in advance.
-Steve

RE
Have you try taking out the battery, leave it for a while, put back the battery and do a hard reset?
It may work

Re: RE
FOSA said:
Have you try taking out the battery, leave it for a while, put back the battery and do a hard reset?
It may work
Click to expand...
Click to collapse
Unfortunately, no such luck
I'd tried that before, but the battery was only out for a short time. This time it was been out for at least 15 minutes.
Does anyone know if there's any kind of hardware or diagnostic test mode it can be booted into?
-Steve

How about updating/upgrading thr ROM?
This might work. you'll have to reinstall everything again, though

Jorgee said:
How about updating/upgrading thr ROM?
This might work. you'll have to reinstall everything again, though
Click to expand...
Click to collapse
Thanks - I may try that tomorrow. However, I'm a little concerned that updating it with a new ROM might invalidate the warranty (especially if it's not a QTEK ROM)
I was hoping that there was some kind of hidden 'diagnostic mode' I could try first, before taking that step. I've also been looking everywhere on the web, and I can't find anyone else that this has happened to. This makes me think it may be a hardware problem, though the way it just 'happened' seems more like s/ware.
Anyway, I'm out today so this will have to wait until tomorrow. My biggest concern at the moment is how I'm going to get any warranty support in the US. All I have at the moment is a very expensive brick!
-Steve

Have you tried entering bootloader mode?
BACKLIGHT BUTTON + POWER BUTTON + RESET HOLE
Then the screen will go blank then show the words SERIAL but you have to look real good because the backlight will be off when the serial is displayed. If it does go there, try hard resetting from there:
__ + __ + RESET HOLE
Hope this helps. WHat's your ROM verison/language anyway?

Jorgee said:
Have you tried entering bootloader mode?
BACKLIGHT BUTTON + POWER BUTTON + RESET HOLE
Then the screen will go blank then show the words SERIAL but you have to look real good because the backlight will be off when the serial is displayed. If it does go there, try hard resetting from there:
__ + __ + RESET HOLE
Hope this helps. WHat's your ROM verison/language anyway?
Click to expand...
Click to collapse
Thanks - but no improvement. I do get the 'serial' screen (with v1.00 displayed at the bottom), but when I do _+_+reset from there, it just goes back to the 'normal' Qtek boot screen and sits there.
Unfortunately, not having access to the OS, I don't know exactly the ROM versions etc. However, the info displayed in red text on the Qtek boot screen (where it hangs) is as follows. How do you interpret this?
R 1.03.00
G 42.36.P8
D 1.13.64 WWE
Thanks for your help - I'm hoping I can get this resolved without having to find out how to get support from Qtek!
-Steve

thefixer said:
Jorgee said:
Have you tried entering bootloader mode?
BACKLIGHT BUTTON + POWER BUTTON + RESET HOLE
Then the screen will go blank then show the words SERIAL but you have to look real good because the backlight will be off when the serial is displayed. If it does go there, try hard resetting from there:
__ + __ + RESET HOLE
Hope this helps. WHat's your ROM verison/language anyway?
Click to expand...
Click to collapse
Thanks - but no improvement. I do get the 'serial' screen (with v1.00 displayed at the bottom), but when I do _+_+reset from there, it just goes back to the 'normal' Qtek boot screen and sits there.
Unfortunately, not having access to the OS, I don't know exactly the ROM versions etc. However, the info displayed in red text on the Qtek boot screen (where it hangs) is as follows. How do you interpret this?
R 1.03.00
G 42.36.P8
D 1.13.64 WWE
Thanks for your help - I'm hoping I can get this resolved without having to find out how to get support from Qtek!
-Steve
Click to expand...
Click to collapse
You have a WWE (English QTEK ROM) but since you cannot enter bootloader mode, I don't think you will be able to update. You might have to return your device to where you bought it

Jorgee said:
You have a WWE (English QTEK ROM) but since you cannot enter bootloader mode, I don't think you will be able to update. You might have to return your device to where you bought it
Click to expand...
Click to collapse
Jorgee,
I notice (in the HTC 'confidential' manual I just downloaded) that there is a diagnostic program. Apparently, I put it on an SD card, and do Power+Backlight+reset to invoke it.
Do you know if that diagnostic tool is available anywhere on here, or elsewhere on the web?
Also - I wqas trying to find exactly how to enter 'bootloader' mode (after I have the 'serial' screen). Should it boot differently from here when doing a hware reset (_+_+reset)?
Regards
Steve

Actually, when you see SERIAL, that means you are already in bootloader mode. One question, what ROM do you wanna update to? QTEK, IMATE, MDA, O2?
Do the following once you get the SERIAL ON THE SCREEN:
1. Open active SYNC, then choose FILE>CONNECTION SETTINGS, then remove the check on the USB option.
2. Connect the phone to the computer with the sync cable. This should change the SERIAL on the device to say USB.
3. Run the ROM Upgrade (whichever it is you chose).
This shoulod update your device. If you are able to enter bootloader mode (SERIAL) this means that probably your ROM (OS) is damaged. Just update it even to the same verison then it should work.
If you get Country ID error while trying to update or any other error, just inform me, i'll walk you through the process.

Jorgee said:
Actually, when you see SERIAL, that means you are already in bootloader mode. One question, what ROM do you wanna update to? QTEK, IMATE, MDA, O2?
Do the following once you get the SERIAL ON THE SCREEN:
1. Open active SYNC, then choose FILE>CONNECTION SETTINGS, then remove the check on the USB option.
2. Connect the phone to the computer with the sync cable. This should change the SERIAL on the device to say USB.
3. Run the ROM Upgrade (whichever it is you chose).
This shoulod update your device. If you are able to enter bootloader mode (SERIAL) this means that probably your ROM (OS) is damaged. Just update it even to the same verison then it should work.
If you get Country ID error while trying to update or any other error, just inform me, i'll walk you through the process.
Click to expand...
Click to collapse
Hi Jorgee,
I'd prefer to go for the QTEK Rom (I'm assuming, from the info I posted above that I currently have 1.13.64 WWE). I'd like to go for the same or later version of this, but looking on the ftp site here I can't see ay QTEK ROM upgraders.
I have checked that when I plug in the USB I get 'USB' appearing on the screen, so I'm hoping that a ROM upgrade will at least work, even if it doesn't fix my problem.
One other thing that concerns me. When I plug into USB (with either a PC or the AC charger) the LEDs aren't lighting to indicate it's charging. Obviously, when during the flash upgrade I should make sure I have a reasonably charged battery. However, I don't know if I do (or even if it's currently charging).
-Steve

I guess leave it charged using the AC adapter for an hours, then here's the QTEK ROM.
ftp://xdaupload:[email protected]/Universal
Under Shipped ROM's you should see the QTEK.
If you cannot find it, tell me, ill send it to you. Trying to avoid this because it is almost 60MB in size

Jorgee said:
I guess leave it charged using the AC adapter for an hours, then here's the QTEK ROM.
ftp://xdaupload:[email protected]/Universal
Under Shipped ROM's you should see the QTEK.
If you cannot find it, tell me, ill send it to you. Trying to avoid this because it is almost 60MB in size
Click to expand...
Click to collapse
Thanks - I'd already found it on the devbuzz site, and am currently giving the unit an hour or two's charge before trying this. Wish me luck!!
-Steve

OK, here's what happened when I tried to update with the same Qtek firmware:
Initial dialog (that shows old and new (to be installed) firmware versions had blanks for all three firmware versions currently installed.
Started the upgrade, and left it running (couldn't bear the tension of watching!). Came back, and found the following error message displayed:
"Error 113: Extended ROM Update Error"
The update tool indicated that I should 'try again'. I'm currently re-charging the unit, and hoping (against hope) that this error was caused by insufficent battery charge.
-Steve

Okay, but maybe it just didn't update the extended ROM but the OS rom has been updated properly. After this error, try the __ + __ + reset button and see if it does boot fine.

Jorgee said:
Okay, but maybe it just didn't update the extended ROM but the OS rom has been updated properly. After this error, try the __ + __ + reset button and see if it does boot fine.
Click to expand...
Click to collapse
No luck.
I've also tried re-flashing a second time, but this time I watched it to see what happens
As the radio firmware is flashing, a message to that effect is shown on the Qtek screen. Once that is finished, the upgrade tool starts the extended ROM flash. At that time the Qtek's screen goes completely blank. The, after a minute or two, the upgrade tool reports that the extended ROM failed to upgrade.
I am assuming that normally, while flashing the extended ROM, there's a message on the phone's screen to say what's going on?
I'm also wondering whether to have a go at flashing the ROM in one of the other ways?
-Steve

I heard sometimes just flashing the Radio only might work.... Then after that you can flash the rest. Just extract the contents of the ROM to a directory. Take note of the ff:
Radio : radio_.nbf
OS : nk_.nbf
Ext : ms_.nbf
I just rename/move/delete the MS and NK files then run the update

Jorgee said:
I heard sometimes just flashing the Radio only might work.... Then after that you can flash the rest. Just extract the contents of the ROM to a directory. Take note of the ff:
Radio : radio_.nbf
OS : nk_.nbf
Ext : ms_.nbf
I just rename/move/delete the MS and NK files then run the update
Click to expand...
Click to collapse
Thanks Jorgee. Still no real success, but I think I might be getting closer.
I've tried the above (using both the original romupdate_ut.exe and MaUpgradeUt_noID.exe - same results with both).
I've tried each of the three files individually (using the ones from the shipped ROM, as downloaded above)
radio_.nbf always seems to flash ok
ms_.nbf always fails right at the start, and nothing appears on the phone's screen
nk.nbf almost worked. It started, and got up to 87% (tried this 3 times), with the update showing on both the phone screen and PC. Then it failed with error 112, leaving the '87% complete' message on the phone's screen.
Soft or hard reboots still result in us just ending up 'hung' at the boot screen.
Once again, thanks for your help so far. However, I am beginning to give up hope!
-Steve

I have the same problem with my Dopod 900 at post http://forum.xda-developers.com/viewtopic.php?p=207524#207524
But mine is no problem with EXTRom Upgrade
Waiting for your advise!
Thanks

truongia said:
I have the same problem with my Dopod 900 at post http://forum.xda-developers.com/viewtopic.php?p=207524#207524
But mine is no problem with EXTRom Upgrade
Waiting for your advise!
Thanks
Click to expand...
Click to collapse
I wish I had a solution!!! I've spent about 20 hours trying to get this thing to boot!
One question though - how did you get the 'boot option' menu up (allowing you to clear the registry etc). I might try that on mine (I had assumed that a hard reset ALWAYS cleared the registry.
Given that I was playing around with ozvga before this happened, there's a small chance that might help (though I think not; as I can't see how that would also stop the flash update working)
-Steve

Cincular 8525 stuck in Bootloader

I have a Cingular 8525 running WM5 that is stuck in bootloader screen. I have tried to soft and hard reset ... just boots back to the same screen, I can't turn it off once in the screen and when i sync via usb to the pc i get the message that the "usb device that is connected is malfunctioning" I have not done any upgrading at all and the phone worked perfectly right up till the time i powered it down and restarted into the bootloader screen.
Please can someone out there help me with this issue?

Zulu137 said:
I have a Cingular 8525 running WM5 that is stuck in bootloader screen. I have tried to soft and hard reset ... just boots back to the same screen, I can't turn it off once in the screen and when i sync via usb to the pc i get the message that the "usb device that is connected is malfunctioning" I have not done any upgrading at all and the phone worked perfectly right up till the time i powered it down and restarted into the bootloader screen.
Please can someone out there help me with this issue?
Click to expand...
Click to collapse
same problems, run perfect before with schaps wm6 rom then flash to faria wm6.1... not feel good with faria. try to flash with other rom then the problem start ..
how to recover ....... please help

Asfarizal said:
same problems, run perfect before with schaps wm6 rom then flash to faria wm6.1... not feel good with faria. try to flash with other rom then the problem start ..
how to recover ....... please help
Click to expand...
Click to collapse
Manage to solve the problem ...thanks WIKI !!
Go to Bootloader mode: Hold side OK and POWER buttons together and reset with stylus
Then Flash to any ROM you want !!

Thanks .... But
Thanks for the reply ... but i have no idea how to do what you tell me, I am new to all this phone "stuff" as a matter of fact this is the first time that i am ever using one of these forums. I have read till i am cross eyed but dont actually understand what you are talking about ... now don't let that scare you away as i am willing to learn and i am not braindead ... you all had to start sometime in this, not so. I get that i need to try and reflash my rom...
so is there some type of rom update software that i need? ... what is a hard SPL?? ... and who is Schaps?? .. sorry guys to do this to you but i would like to get into this game and i need some ( well maybe a lot ) of pointers.
Thanks for your time.

1. Search for "mr vanxs guide" so you have an idea on what you're doing.
2. OK, as Asfarizal said "Go to Bootloader mode: Hold side OK and POWER buttons together and reset with stylus". If you cant work out what the buttons are, go to the manual. it will tell you.
3. type in "hard SPL" in search on the forum & download the .zip or .rar file. this should have 2 files inside when opened,
a). RUUWrapper.exe and
b). RUU_signed.nbh
sync Hermes and double click .exe file. follow prompts.
4. find a rom that you want (would suggest TNT SE as a fairly good rom for noobs... good and stable, no problems...) Again download, then (and this is personel preference) format an sd card fat 32 and copy RUU_signed.nbh into root directory. Rename it Hermimg.nbh. Put into Phone and put into bootloader(make sure the battery is more than 50%) follow prompts. This should get you out of trouble. You can also sync your Phone and double click on the RUUWrapper.exe HOWEVER, if you should reset your computer, pull out the usb cable or have anything else happen to the computer that interrupts the flashm, you could end up with a worse brick than you have now. try to read up on flashing (search for "mr vanxs guide") and this should help you a lot if you have other questions. Good luck and happy flashing......

Thank You
I will follow the instructions you gave and try to get it going this weekend.
Thank you so much for your time

Zulu137 said:
Thanks for the reply ... but i have no idea how to do what you tell me, I am new to all this phone "stuff" as a matter of fact this is the first time that i am ever using one of these forums. I have read till i am cross eyed but dont actually understand what you are talking about ... now don't let that scare you away as i am willing to learn and i am not braindead ... you all had to start sometime in this, not so. I get that i need to try and reflash my rom...
so is there some type of rom update software that i need? ... what is a hard SPL?? ... and who is Schaps?? .. sorry guys to do this to you but i would like to get into this game and i need some ( well maybe a lot ) of pointers.
Thanks for your time.
Click to expand...
Click to collapse
Looks like you've got a lot of reading to do, and a problem to sort out. Firstly a couple of answers...
Schaps is a Rom Cooking guru (makes custom versions of WM5, WM6 etc). When you get your phone sorted out I'd recommend trying one of his roms.
Hard SPL. The SPL is part of the bootloader which effectively dictates how a rom is flashed and what roms can be flashed. HardSPL is a custom version of this which allows you to flash any rom from any carrier. It also protects against a bad flash in many cases. It is recommended before you try flashing any new roms or radio roms. Use Hard-SPL-V7 at the bottom of the first post here.
The Rom upgrading software is contained in any of the cooked or carrier supplied roms. It is normally a .zip file which cotains 2 files: xxxxxRUU.exe and RUU_signed.nbh. You run the .exe file from your PC when connected to your phone via USB. More details of how to do this are in MrVanx's guides. Also other resources here.
Now to try to sort your phone out...
What is displayed on your screen when in bootloader mode? It should be something like this:
HERM200
IPL-1.04
HERM200
SPL-2.10.Olipro (This is HardSPL V7)
If you don't have an Olipro SPL then you need to get HardSPL onto your phone. If you haven't done any upgrading and have had the phone from new then I guess you don't have hardSPL.
Now you need to fix your USB Malfunctioning problem. I can't help too much here except to suggest trying a different cable, different USB port or different PC. Also, if you are running Vista try an XP maxhine. When you connect to the PC does your phone show Serial or USB on the screen? If you can't get a USB connection, all is not lost - you can re-flash your rom using an SD card, method here.
There is a thread about un-bricking phones which may help.
There are various diagnostic tools (which can also screw your phone if used incorrectly). The favourite of these is MTTY but you need a USB connection to use this.
If your phone is in warranty I'd recommend getting your supplier to sort it out, but if not I'd try to re-flash an ORIGINAL supplier rom (Cingular I guess). You can get links to the official supplier roms here.
I think (might be wrong) that sometimes when stuck in bootloader you need to flash an official rom, not a cooked one to recover your phone - then you can run HardSPL and then flash cooked roms again.

Cingular 8525 stuck in bootloader
Thanks for the reply ... lots of great input.
Now to answer some of your questions.
1) When I power up the phone (only pushing the power button ) it goes straight into the bootloader screen without pushing any other buttons, and it displays
HERM100
IPL-1.01
HERM100
SPL-1.06
Then at the bottom in the white bar it says "Serial"
The only way that i have found to power it down again is to remove the battery, there is no response from any single buttons after it is in bootloader
the soft reset and hard reset work but it just goes right back to the bootloader screen after.
2) The USB malfunction. This only started after the phone "crashed" and before that it worked great ... well i only used it to sync up to my work pc for the contacts and to get pictures onto my hard drive.
all the PC's that i use are running XP. I have tried my home PC and my Laptop
and the work PC and all of them have their own cables and they all say the same thing ... "the USB device is malfunctioning"
I am sure that when i get the phone going again the USB will start to function again.
3) Phone warranty ... I bought the phone off e-bay from a store in new york about 10 months ago as a "new unlocked cingular 8525" it was new and unlocked, but i have no idea how they unlocked it. I would assume that there would be no warranty now and in any case i live in Canada and would have to ship it down to the states to an AT&T repair center and that sounds like a nightmare to me with the customs and so on.
I will give you a little more background on the problem. the phone worked like a charm without any problems at all for the 10 months that i had it, then the morning of the crash the phones alarm did not go off in the morning and i was almost late for work ... i did not pay it any further attention untill at 3:26pm
that afternoon the alarm went off ??????? (it was set for 6:05am) so i checked the main clock time, it was right. I then checked the alarm time, it was right ??? So i figured that something must have just got confused, so i powered down the phone with the power button to just restart it and while it was powered down i removed the battery to take the oportunity to to clean all those fuzzies and dust that collect in the battery compartment out and put it all together and powered it up again (just by pushing the power button) and this wierd red, green, blue and white screen appeared and that is all that i have seen since ???
I hope that answers your questions and i will start going through the links that you sent and get to reading ... will there be a pop quiz ... lol
Thanks again for your time and i very much appreciate all the time that all of you have spent on me and my phone ..... I know that you all just feel bad for me because i now have to use a Motorolla V551 ... lol

Great Work
ultramag69 said:
1. Search for "mr vanxs guide" so you have an idea on what you're doing.
2. OK, as Asfarizal said "Go to Bootloader mode: Hold side OK and POWER buttons together and reset with stylus". If you cant work out what the buttons are, go to the manual. it will tell you.
3. type in "hard SPL" in search on the forum & download the .zip or .rar file. this should have 2 files inside when opened,
a). RUUWrapper.exe and
b). RUU_signed.nbh
sync Hermes and double click .exe file. follow prompts.
4. find a rom that you want (would suggest TNT SE as a fairly good rom for noobs... good and stable, no problems...) Again download, then (and this is personel preference) format an sd card fat 32 and copy RUU_signed.nbh into root directory. Rename it Hermimg.nbh. Put into Phone and put into bootloader(make sure the battery is more than 50%) follow prompts. This should get you out of trouble. You can also sync your Phone and double click on the RUUWrapper.exe HOWEVER, if you should reset your computer, pull out the usb cable or have anything else happen to the computer that interrupts the flashm, you could end up with a worse brick than you have now. try to read up on flashing (search for "mr vanxs guide") and this should help you a lot if you have other questions. Good luck and happy flashing......
Click to expand...
Click to collapse
Thanks a lot man & great work i unbricked my Herm100 with method u mention above thanks a lot & great job keep it up

I also have this problem.
I d/l Hard-SPL-V7
and when i run RUUWrapper.exe
I get an error saying the application failed to initialize properly (0xc0000135)
What's going on?
How do i fix this?
this happened when i was trying to unlock the phone.
Thanks

need help
when i switch on my orange herm100 it shows On the bootloader screen is displayed:
HERM100
I PL-1.01
HERM100
SPL-1.40.01ipro
history : i buy unlocked orange phone
fewdays back i found no imei ,
yesterday i try to flash by micro sd but in gsm stage its gets hang no progress after extrom stage
IPL - OK
BOOTLOADER - OK
SPLASH1 - OK
SPLASH2 - OK
EXTROM - OK
GSM - (NO ACTION)
OS -
i tryed several time no action, i cant connect by mini usb.
PLEASE help me
tell me which it the right rom to chose? step by step procedure..
how to rectify imei?
thanks and regards
kirtibas

kirtibas, sorry it took so long to reply, 1st thing I'd do is upgrade to SPL 2.10 olipro. This is safer to use than others. then I'd suggest reflashing a stock rom to see if that works. After stock rom works then use a cooked rom as your heart desires... Cheers...

my i-mate jasjar is dead

hi all,
my jasjar had an error while upgrading to ranju 7.7,
i tried to reset, didn't came back,
hard reset neither,
i went to bootloader mode, i could,
i connected it again to the pc, it showed usb,
i tried to flash to Rom that was working previously it arrives to 7% than stops,
what should i do ...
i tried to flash with official rom, it says that the rom wasn't designed for this model, it has worked before...
please help...

Hi,
if you search in the ranju's thread there's the solution.
You could have the doc corrupted. Simply read the wiki,
you must use mtty to format your device and then reflash the rom you want (with radio rom also).

Had similar problem
upgrading Imate JasJar to Ranju 7.7, only at first it showed as success, then it started behaving funny during customization, then failed to customize, then got stuck on Windows 6.1 green flash screen and eventually refused to budge beyond blue Imate screen with versions info. I tried everything, a few dozens of hard resets returned me to the same problem, removing the battery didn't do much and mtty didn't show USB as available option, so couldn't even use that. I was pretty much stuck solidly and for a while. At my wits end I read that problems like mine are associated with DOC corruption and my JasJar is as good as dead, quite a few people suggested to those who are in the same position to throw their bricked babies away, as there is no economic solution apart from sending it for service where the corrupted chip may be replaced. What do you know, I followed wiki recommendation and entered a boot screen by pressing light power reset, then just flashed back to Ranju 7.6 and my JasJar was brought back to life!!! The update went without a glitch and everything is working fine. I guess I will keep the 7.7 on my O2 and 7.6 on my Imate for now, won't be risking an update anymore on the JasJar, don't think I have much hair left after all the pulling I did trying to bring it back to life. Hope this helps someone in the same predicament

jokove said:
hi all,
my jasjar had an error while upgrading to ranju 7.7,
i tried to reset, didn't came back,
hard reset neither,
i went to bootloader mode, i could,
i connected it again to the pc, it showed usb,
i tried to flash to Rom that was working previously it arrives to 7% than stops,
what should i do ...
i tried to flash with official rom, it says that the rom wasn't designed for this model, it has worked before...
please help...
Click to expand...
Click to collapse
does it turn on at all?

Does the device turn on at all after a hard reset?

Dude, I had a same problem it rectified though, check following of my blog...
http://jay-joshi.spaces.live.com/blog/cns!851D717EDFF14CEC!3258.entry
or
http://buzzdev.net/read.php?40,13307,page=1

Rarest_Kind said:
Dude, I had a same problem it rectified though, check following of my blog...
http://jay-joshi.spaces.live.com/blog/cns!851D717EDFF14CEC!3258.entry
or
http://buzzdev.net/read.php?40,13307,page=1
Click to expand...
Click to collapse
Problem resolved?

[Q] dead HD2

how can i revive my dead T-MOBILE HD2?...
it has no power & bootloader; only continuous vibration after pressing the power button...

donkeanu said:
how can i revive my dead T-MOBILE HD2?...
it has no power & bootloader; only continuous vibration after pressing the power button...
Click to expand...
Click to collapse
What did you do right before it was dead?
Did you change the Radio?

Might be battery related too.
Try to find someone else with an HD2 and swap the battery to try.

help
same here. i accidentaly flashed a diff radio rom
it just contiunsly vibrates
no light, no power,... please help me in reviving this .
thanks,

sugui said:
same here. i accidentaly flashed a diff radio rom
it just contiunsly vibrates
no light, no power,... please help me in reviving this .
thanks,
Click to expand...
Click to collapse
You cant, you've bricked it. Only way is to JTAG or replace board as far as I know.

sugui said:
same here. i accidentaly flashed a diff radio rom
it just contiunsly vibrates
no light, no power,... please help me in reviving this .
thanks,
Click to expand...
Click to collapse
If you have flashed a EU/Asian Radio/stock ROM on a T-Mous device, than it's broken.

kurt-willems said:
What did you do right before it was dead?
Did you change the Radio?
Click to expand...
Click to collapse
I can still enter botloader flash hspl but can do nothing the phone just turns off
can anyone help me! when i connect and try to flash another rom it turns off at 29% ! Has anyone been able to solve this problem! it is a brand new phone i bricked the same day i bought it trying to put the energy rom! i dont live in the usa so i paid a hard 500 bucks to get this phone all for nothing

Don-Maco said:
I can still enter botloader flash hspl but can do nothing the phone just turns off
can anyone help me! when i connect and try to flash another rom it turns off at 29% ! Has anyone been able to solve this problem! it is a brand new phone i bricked the same day i bought it trying to put the energy rom! i dont live in the usa so i paid a hard 500 bucks to get this phone all for nothing
Click to expand...
Click to collapse
If you can get it into bootloader than it is not bricked. It sort of sounds like you might have a dead battery. Try to let it charge are maybe get an external charger for it.
Now as for your problem with installing a ROM you can flash either by USB and computer or via SD card. If you use the USB and computer method then out your phone into bootloader and connect it to the computer via USB cable and wait for Serial in the white bar of the bootloader screen to change to USB and then flash the ROM.
If you want to use the SD card method put your SD card into a micro SD card reader and plug it into your computer. If the ROM you downloaded is a .exe then change it to .zip and then right click and select viewl or explore wich ever one it shows. Find the .nbh file and rename it to leoimg.nbh and copy it to the SD card and insert the SD card into your phone. Put your phone into bootloader but hold the volume down button down until you see searching on your phone screen then release the volume down button. The ROM will then flash.

T-Macgnolia said:
If you can get it into bootloader than it is not bricked. It sort of sounds like you might have a dead battery. Try to let it charge are maybe get an external charger for it.
Now as for your problem with installing a ROM you can flash either by USB and computer or via SD card. If you use the USB and computer method then out your phone into bootloader and connect it to the computer via USB cable and wait for Serial in the white bar of the bootloader screen to change to USB and then flash the ROM.
If you want to use the SD card method put your SD card into a micro SD card reader and plug it into your computer. If the ROM you downloaded is a .exe then change it to .zip and then right click and select viewl or explore wich ever one it shows. Find the .nbh file and rename it to leoimg.nbh and copy it to the SD card and insert the SD card into your phone. Put your phone into bootloader but hold the volume down button down until you see searching on your phone screen then release the volume down button. The ROM will then flash.
Click to expand...
Click to collapse
Thats the problem my battery works in another phone but my phone just not stay on! it stays long enough to flash catula & beepe hspl and back to spl! if i try flashing a radio is it flashes it then says its not supported on this rom after 100% if its not supported why install after 100% i got the radio on the t-mobile forum! so its good! When i used anothe battery that is charged to 100% the phone just wouldn't turn on! i even ordered a new battery and data cable yesterday brand new & will have to wait a crazy two weeks shipping! I ant see what went wrong cuz i have been flashing Htc & windows mobile devices like for ever! just this usa version wich is supposed to be high end is giving me the creeps! what can i do

Don-Maco said:
Thats the problem my battery works in another phone but my phone just not stay on! it stays long enough to flash catula & beepe hspl and back to spl! if i try flashing a radio is it flashes it then says its not supported on this rom after 100% if its not supported why install after 100% i got the radio on the t-mobile forum! so its good! When i used anothe battery that is charged to 100% the phone just wouldn't turn on! i even ordered a new battery and data cable yesterday brand new & will have to wait a crazy two weeks shipping! I ant see what went wrong cuz i have been flashing Htc & windows mobile devices like for ever! just this usa version wich is supposed to be high end is giving me the creeps! what can i do
Click to expand...
Click to collapse
note i cant flash the rom cuz it hangs at 29% then nothing happens for like 10 minutes! then the phone turns itself off! and it just wouldn't budge! i never flashed through sd card so i really would like the exact steps to avoid errors! i dont wanna screw 500u$d

Don-Maco said:
Thats the problem my battery works in another phone but my phone just not stay on! it stays long enough to flash catula & beepe hspl and back to spl! if i try flashing a radio is it flashes it then says its not supported on this rom after 100% if its not supported why install after 100% i got the radio on the t-mobile forum! so its good! When i used anothe battery that is charged to 100% the phone just wouldn't turn on! i even ordered a new battery and data cable yesterday brand new & will have to wait a crazy two weeks shipping! I ant see what went wrong cuz i have been flashing Htc & windows mobile devices like for ever! just this usa version wich is supposed to be high end is giving me the creeps! what can i do
Click to expand...
Click to collapse
Check your battery pins in your HD2 to make sure that one or more of them are not slightly bend more than it should be. If none don't appear to be bend if possible compare them to another HD2 to make sure the are in the proper positions. If they are then you might have an internal hardware problem. But don't just take my word for thag cause I am no expert when it
comes to the hardware side of the HD2.
Edit: I just read your other post here is a link to the thread on flashing via SD card. Read the first post for detailed instructions on flashing via SD card

heey thanks man i'll try that as soon as i get from work and see if that helps!

T-Macgnolia said:
Check your battery pins in your HD2 to make sure that one or more of them are not slightly bend more than it should be. If none don't appear to be bend if possible compare them to another HD2 to make sure the are in the proper positions.
Click to expand...
Click to collapse
Thanks for that tip, it solved my problem: the middle pin wasn't in proper position.